The control fields are 16 bit wide. Combine the per byte definitions to
make it more convenient.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Allows informing the connection manager of additional information on CQM
events. Allows the connection manager to request the same information
on demand by using the existing "SignalPoll" method.
* Add new property "SignalChange"
* Add storage for wpa_signal_info into wpa_supplicant context
object
* Copy memory from event to context object on CQM Event
* Write a common conversion method to be used by both "SignalPoll" and
this property
Signed-off-by: David Ruth <druth@chromium.org>
Facilitate emitting more station information over D-Bus for use by the
connection manager.
* Add storage for more NL80211_STA_INFO_* fields to data structures, and
move them through the system.
* Reorder NL80211_STA_INFO_* fields in driver_nl80211.c to match the
ordering in nl80211.h.
* Convert signal field to an integer to support holding WPA_INVALID_NOISE
and avoid changing logging.
* Add fields to hostap_sta_driver_data to capture more information
* fcs_error_count
* beacon_loss_count
* expected_throughput
* rx_drop_misc
* rx_mpdus
* rx_hemcs
* tx_hemcs
* rx_he_nss
* tx_he_nss
* avg_signal
* avg_beacon_signal
* avg_ack_signal
* Add struct hostap_sta_driver_data to struct wpa_signal_info and remove
redundant fields and redundant attribute parsing
* Change logging when printing txrate to handle unsigned long
value
Signed-off-by: David Ruth <druth@chromium.org>
Indicate whether the collocated BSS in the RNR is a part of a multiple
BSSID set and whether it is a transmited BSSID.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add test cases for MBSSID functionality with EMA.
Add helper functions to create the configuration file, start hostapd
instance and client association with the transmitting interface.
he_ap_mbssid_open: 4 VAPs with open security in multiple BSSID
configuration. The first interface transmits beacons and probe responses
which include the multiple BSSID element(s) with remaining profiles.
he_ap_mbssid_same_security: 2 VAPs, all with SAE. In such a case the
Multiple BSSID elements in management frames do not include RSN and RSNE
elements as all non-transmitting profiles have exact same security
configuration as the transmitting interface.
he_ap_mbssid_mixed_security{1,2}: 8 VAPs with mixed security
configurations (SAE, OWE, WPA2-PSK, open). he_ap_mbssid_mixed_security1:
Transmitting interface uses SAE. In this case the non-transmitting
profiles will include non inheritance element (IEEE Std 802.11-2020,
9.4.2.240) wherever the security differs from the transmitting profile.
he_ap_mbssid_mixed_security2: Transmitting profile is open hence no need
for the non inheritance elements. Instead each non-transmitting profile
includes RSN, RSNE if applicable.
he_ap_ema: Enhanced multi-BSS advertisements (EMA) with 8 VAPs all with
SAE configuration.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Send MBSSID and EMA configuration parameters to the kernel.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
As described in IEEE Std 802.11-2020, 11.1.3.8 Multiple BSSID procedure,
set the lowest AID value assigned to any client equal to 2^n, where n is
the maximum BSSID indicator of the MBSSID set.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Process the Known BSSID elements if included by non-AP stations. The
format is described in IEEE Std 802.11ax-2021, 9.4.2.261.
Non-AP stations may include this element in directed Probe Request
frames to indicate which of the multiple BSSIDs they have already
discovered. AP should exclude these profiles from the Probe Response
frame.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Add Multiple BSSID Configuration element data per IEEE Std
802.11ax-2021, 9.4.2.260 when enhanced multiple BSSID advertisement
(EMA) is enabled. This element informs the stations about the EMA
profile periodicity of the multiple BSSID set.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Set extended capabilities as described in IEEE Std 802.11ax-2021,
9.4.2.26. Reset the capability bits to 0 explicitly if MBSSID and/or EMA
is not enabled because otherwise some client devices fail to associate.
Bit 80 (complete list of non-tx profiles) is set for all Probe Response
frames, but for Beacon frames it is set only if EMA is disabled or if
EMA profile periodicity is 1.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Add helper functions to retrieve the context for the transmitting
interfaces of the MBSSID set and the index of a given BSS.
Set device parameters: BSS index and the transmitting BSS.
Include Multiple BSSID elements in Beacon and Probe Response frames.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Add data per IEEE Std 802.11-2020, 9.4.2.240. Current implementation is
added for the security and extended supported rates only.
For the Extended rates element, add a new member 'xrates_supported'
which is set to 1 only if hostapd_eid_ext_supp_rates() returns success.
Without this change, there are cases where this function returns before
adding the element for the transmitting interface resulting in incorrect
addition of this element inside the MBSSID Non-Inheritance element.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Co-developed-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Add Multiple BSSID element data per IEEE Std 802.11ax-2021, 9.4.2.45.
Split the BSSes into multiple elements if the data does not fit in
the 255 bytes allowed for a single element.
Store the total count of elements created and the offset to the start
of each element in the provided buffer.
Set the DTIM periods of non-transmitted profiles equal to the EMA
profile periodicity if those are not a multiple of the latter already as
recommended in IEEE Std 802.11ax-2021, Annex AA (Multiple BSSID
configuration examples).
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
When multiple BSSID advertisement feature is enabled in IEEE 802.11ax
mode or later, Beacon frames are not transmitted per interface, instead
only one of the interfaces transmits Beacon frames that include one or
more Multiple BSSID elements with configuration for the remaining
interfaces on the same radio.
Change the existing logic such that all configuration details for all
the interfaces are available while building the Beacon frame template
for the transmitting interface itself.
Do not change the flow for the cases where multiple BSSID advertisement
is not enabled.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Retrieve driver capabilities for the maximum number of interfaces for
MBSSID and the maximum allowed profile periodicity for enhanced MBSSID
advertisement.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Add configuration option 'mbssid' used to enable multiple BSSID (MBSSID)
and enhanced multiple BSSID advertisements (EMA) features.
Reject the configuration if any of the BSSes have hidden SSID enabled.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Add a testing option to delay EAPOL-Key messages 1/4 and 3/4. By setting
delay_eapol_tx=1, the actual EAPOL Tx will occur on the last possible
attempt (wpa_pairwise_update_count) thus all previous attempts will fail
on timeout which is the wanted delay.
In addition, add an hwsim test that uses this testing option to verify
that non protected Robust Action frames are dropped prior to keys
installation in MFP.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Since wpa_supplicant can change MAC address of the interface on its own
(with randomization enabled) it makes sense to introduce MACAddress as a
property of the interface and send notifications about its change.
This allows other applications to just use D-Bus instead of both
communicating over D-Bus with wpa_supplicant and listening to Netlink
notifications for MAC changes.
Signed-off-by: Andrzej Ostruszka <amo@semihalf.com>
Include the start of the next EAP method in an EAP Payload TLV in the
same message with the Crypto-Binding TLV for the previous EAP method to
get rid of one roundtrip when using more than a single EAP
authentication method within the tunnel. The previous, not optimized,
sequence can still be used with eap_teap_method_sequence=1 for more
complete testing coverage.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
When using the optimized EAP method sequence within the tunnel, crypto
binding for the previous EAP method can be performed in the same message
with the start of the next EAP method. The Crypto-Binding TLV needs to
be processed before moving to the next EAP method for IMSK to be derived
correctly, so swap the order of these processing steps.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
While RFC 7170 does not describe this, EAP-TEAP has been deployed with
implementations that use the EAP-FAST-MSCHAPv2, instead of the
EAP-MSCHAPv2, way of deriving the MSK for IMSK. Use that design here to
interoperate with other implementations since that seems to be direction
that IETF EMU WG is likely to go with an RFC 7170 update.
This breaks interoperability with earlier hostapd/wpa_supplicant
versions.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
EAP-FAST uses a special variant of EAP-MSHCAPv2 called EAP-FAST-MSCHAPv2
in RFC 5422. The only difference between that and EAP-MSCHAPv2 is in how
the MSK is derived. While this was supposed to be specific to EAP-FAST,
the same design has ended up getting deployed with EAP-TEAP as well.
Move this special handling into EAP-MSCHAPv2 implementation so that it
can be shared for both needs.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
With the UHB enabled, the number of scanned frequencies may exceed
the buffer size. Increase it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Add a basic test to verify AP selection algorithm with EHT AP.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Add support to consider EHT rates while calculating the estimated
throughput for scan results.
- The estimated EHT throughput uses the HE 0.8 usec GI rates from the
relevant EHT-MCS tables from IEEE P802.11be/D2.0, 36.5.
- The minimum SNR values for EHT rates (4096-QAM) are derived by adding
the existing minimum SNR values of 1024-QAM rates from HE tables and
the difference between the values of minimum sensitivity levels of
1024-QAM rates and 4096-QAM rates defined in Table 36-67 (Receiver
minimum input level sensitivity) in IEEE P802.11be/D2.0.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
There are several cases where memory allocations are not
checked for success. Add conditions and error messages, as some
analyzers complain about that.
Signed-off-by: Micha Hashkes <micha.hashkes@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
The arguments were swapped. Apparently all the calls to this function
use the same value for both input and output parameters, so it went
unnoticed. Fix it.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
This is needed to be able to drop the OpenSSL security level, if
necessary, for cases where old certificates (e.g., something using SHA-1
signatures) are still needed. openssl_ciphers="DEFAULT@SECLEVEL=0" can
achieve this, but only if applied before attempting to load the
certificates.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Even if the use of H2E isn't strictly mandatory when using SAE on 6 GHz,
WPA3-Personal pushes it on 6 GHz, so enable H2E automatically when
connecting to a BSS on the 6 GHz band if it was not enabled in the
configuration.
Signed-off-by: Jimmy Chen <jimmycmchen@google.com>
Even if the use of H2E isn't strictly mandatory when using SAE on 6 GHz,
WPA3-Personal pushes it on 6 GHz. So lets automatically enable it by
setting sae_pwe=2. This will allow both the hunting-and-pecking and
hash-to-element to work (and be backward compatible).
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
When WPS is running simultaneously on multiple per-band radios (e.g., a
separate 2.4 GHz and 5 GHz band radios in an AP device), handle
synchronization of scan results, detect PBC session overlap, and cancel
WPS for enrollees on both interface, if the UUID of the registrars on
different bands differ.
Signed-off-by: Sai Pratyusha Magam <quic_smagam@quicinc.com>
The system may be interested in knowing which bootstrap information
entries are being exercised. This could be used for statistics or
completion signaling to upper application layer outside of hostapd,
along with the public key hash.
Signed-off-by: Michal Kazior <michal@plume.com>
Just like with WPA-PSK and keyids it may be desired to identify
connecting clients to provide additional network filtering.
This does:
- extend DPP_EVENT_AUTH_SUCCESS to expose public
key hash of the peer so the system can pick it
up and use for identification later
- store public key hash in PMKSA from DPP Network
Intro for later use
- extend sta mib to print out the dpp_pkhash
from PMKSA if present
- extend AP_STA_CONNECTED to include the
dpp_pkhash from PMKSA if present
Signed-off-by: Michal Kazior <michal@plume.com>
This event is generated in a couple of places. It'll be easier to extend
the event with additional metadata if it's generated in a single place.
Signed-off-by: Michal Kazior <michal@plume.com>
On NixOS[1] - a Linux distribution which allows to configure a full OS
declaratively - it's possible to configure SSIDs for `wpa_supplicant`
like this:
networking.wireless.networks = {
myssid = {
pskRaw = "<redacted>";
};
};
It's also possible to add networks "imperatively" using `wpa_gui` or
`wpa_cli`. However it's not possible to do both because if the first
option is used, NixOS creates a read-only symlink at
`/etc/wpa_supplicant.conf` and then it's not possible for
`wpa_supplicant` anymore to write to it.
This patch aims to help us changing this: while "declarative" SSID
configuration can be quite useful, it's a bad idea for e.g. sensitive
stuff like a WPA2 enterprise network.
The original idea was to use `-I`[2] for immutable configs (including
"declarative" networks) on NixOS and `-c /etc/wpa_supplicant.conf` for
anything "imperative".
However this doesn't really work out because if a wifi network from a
config file specified with `-I` is changed by e.g. `wpa_gui`, it's
silently overwritten in `/etc/wpa_supplicant.conf` (specified with
`-c`) which is IMHO unintuitive (in our case at least). This patch
basically declares each network defined in a config file passed via `-I`
to `wpa_supplicant` as "read-only" and doesn't write these "read-only"
networks to `/etc/wpa_supplicant.conf`.
A bit more context can be found on GitHub in the PR where I implemented
this[3].
[1] https://nixos.org/
[2] Added in e6304cad47
[3] https://github.com/NixOS/nixpkgs/pull/113716
Signed-off-by: Maximilian Bosch <maximilian@mbosch.me>
When considering a channel for a bandwidth of 40/80/160 MHZ on the 5 GHz
or 6 GHz band, allow selecting one of the other channels in the segment
instead of the first one. This is done only if the other channel's
interference_factor is lower than the first one's.
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
When using 40/80/160 MHz bandwidth on the 5 GHz or 6 GHz band, enforce
the secondary channel to be the other channel of the corresponding 40
MHz segment.
Even if this is useless for now, this is preparatory work to allow ACS
to select a primary channel which is not the first of its segment.
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
When using 40/80/160 MHz bandwidth, instead of computing the index of
the segment center freq based on the selected channel, lets look it up
in the bw_desc[] table.
This is preparative work to allow selecting a primary channel which is
not the first of the segment.
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
This extracts the 3 lists of allowed channels for 40/80/160 MHz
bandwidth out of their respective functions. It also adds for each
segment the frequency of the segment's last channel and the index of the
segment's "center" channel.
This is preparative work to allow selecting a channel which is not the
first of its segment for 40/80/160 MHz. In addition, this adds the 5 GHz
160 MHz channel defined for 5735-5895 MHz (channels 149-177).
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Add new 'mac_addr' policy (3) with which supplicant expects to also
obtain 'mac_value' with pregenerated value of MAC address to be used for
given SSID.
The main difference between this policy and policy 1 is the ability to
control persistence of the MAC address used. For example if there is
a requirement to always use the same (but random) MAC address for given
SSID (even if user removes/forgets the network) this could be handled
outside of the wpa_supplicant by using some SSID based hashing scheme to
generate MAC (or by just storing the randomly generated one) and
providing it to wpa_supplicant together with mac_addr=3 policy.
Signed-off-by: Andrzej Ostruszka <amo@semihalf.com>
IEEE Std 802.11ax-2021, 12.12 explicitly disallows use of Open System
authentication without encryption on the 6 GHz band.
Signed-off-by: Sharadanand Karanjkar <skaranjkar@datto.com>
As P2P GOs are not expected to be collocated, i.e., they are not
expected to be announced in the RNR element of other APs, they can
operate only on preferred scanning channels (PSCs).
When performing a full scan for P2P discovery, include only the 6 GHz
PSCs (if supported) to avoid scanning channels on which P2P GOs are not
expected to reside.
While at it also fix couple of places that missed including 60 GHz
channels in P2P full scan.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Instead of opening a new TCP connection for each received Presence
Announcement from the same Enrollee from the Relay to the Controller,
use an existing connection if it is still waiting for Authentication
Response. This avoids opening multiple parallel sessions between the
same Controller and Enrollee.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
If wpa_supplicant receives a duplicate DPP chirp over a TCP connection
this causes the connection (and all of its state) to be torn down.
Such a tear-down means that the authentication request state is discarded.
That in turn will cause any otherwise valid authentication response
to not succeed.
This commit addresses that problem. It also does not attempt to check
for duplicates until at least we know that we have an appropriate hash.
Signed-off-by: Eliot Lear <lear@lear.ch>
