This may fail with FIPS builds because the FIPS requirement is that the
password must be at least 14 characters.
Signed-off-by: Juliusz Sosinowicz <juliusz@wolfssl.com>
pbkdf2_sha1() may return errors and this should be checked in calls.
This is especially an issue with FIPS builds because the FIPS
requirement is that the password must be at least 14 characters.
Signed-off-by: Juliusz Sosinowicz <juliusz@wolfssl.com>
Some API is not available when using FIPS. We need to allocate memory
and initialize the structs directly.
Signed-off-by: Juliusz Sosinowicz <juliusz@wolfssl.com>
Register a callback with wolfCrypt_SetCb_fips to inform the user of
errors in the wolfCrypt FIPS module.
Signed-off-by: Juliusz Sosinowicz <juliusz@wolfssl.com>
In some configurations the wc_Init*() functions may either allocate
memory or other system resources. These resources need to be freed.
Co-authored-by: JacobBarthelmeh <jacob@wolfssl.com>
Signed-off-by: Juliusz Sosinowicz <juliusz@wolfssl.com>
Add support for loading private keys and certificates in both PEM and
DER formats with wolfSSL.
Signed-off-by: Juliusz Sosinowicz <juliusz@wolfssl.com>
Add support for IMSI privacy in the EAP-SIM/AKA peer implementation. If
the new wpa_supplicant network configuration parameter imsi_privacy_key
is used to specify an RSA public key in a form of a PEM encoded X.509v3
certificate, that key will be used to encrypt the permanent identity
(IMSI) in the transmitted EAP messages.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add RSA public key (in an X.509v3 certificate) and private key for IMSI
privacy. These were generated with
openssl req -new -x509 -sha256 -newkey rsa:2048 -nodes -days 7500 \
-keyout imsi-privacy-key.pem -out imsi-privacy-cert.pem
Test the case where wpa_supplicant side RSA-OAEP operation for IMSI
privacy is done in an external component while the hostapd (EAP server)
processing of the encrypted identity is internal.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add support for IMSI privacy in the EAP-SIM/AKA server implementation.
If the new hostapd configuration parameter imsi_privacy_key is used to
specify an RSA private key, that key will be used to decrypt encrypted
permanent identity.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add new crypto wrappers for performing RSA-OAEP-SHA-256 encryption and
decryption. These are needed for IMSI privacy.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Modify hostapd_set_freq_params() to include EHT parameters and update
the calling functions to match.
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Set bit 21 in the neighbor report for an EHT AP as described in IEEE
P802.11be/D1.5, 9.4.2.36. Also move the check for HE outside the check
for HT as neither HT nor VHT are enabled in the 6 GHz band.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Add support for EHT capabilities in the addition of a new station entry
to the driver.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Parse EHT capabilities sent by a non-AP STA in (Re)Association Request
frames. Validate the length of the element, matching MCS rates between
AP TX and STA RX. Store the capabilities in the station info structure.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Parse and store pointers to EHT Capabilities and Operation elements
received in Management frames.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Add EHT Operation element in Beacon, Probe Response, and (Re)Association
Response frames using the format described in IEEE P802.11be/D1.5,
9.4.2.311.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Add new configuration options to configure EHT operating channel
width and center frequency.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Add compilation support for IEEE 802.11be along with options to enable
EHT support per radio and disable per interface.
Enabling HE is mandatory to enable EHT mode.
Tested-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Pass non-AP STA's EHT capabilities to the driver using the
NL80211_ATTR_EHT_CAPABILITY attribute.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Add nl80211 support to parse the EHT capabilities passed by the kernel
using new attributes added in NL80211_BAND_ATTR_IFTYPE_DATA.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Define the following fields described in IEEE P802.11be/D1.5:
- 9.4.2.311 EHT Operation element
- 9.4.2.313 EHT Capabilities element
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
The comment about the IEEE 802.11ax functionality being experimental and
based on a not yet finalized standard is not accurate anymore since IEEE
Std 802.11ax-2021 has already been published. Remove that comment and
add the entry for wpa_supplicant as well.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Allow hostapd configuration to specify use of the 6 GHz band with the
specific op_class values without having to set the hw_mode=a parameter
explicitly.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The previously used buffer was not large enough to be able to print out
all 6 GHz channels, so use a larger buffer to avoid leaving out
supported channels from the debug print.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_11BE_EMLSR_MODE value to allow
or disallow eMLSR hardware mode for IEEE 802.11be MLO capable devices.
If this attribute is set to 1, and if the firmware supports this
capability too, the STA advertises this capability to the AP over
Association Request frame. This attribute will not have any effect on
legacy devices with no IEEE 802.11be support.
Signed-off-by: Gururaj Pandurangi <quic_panduran@quicinc.com>
It looks like the OpenSSL callbacks for SSL_SESSION can end up calling
the remove callback for multiple SSL_SESSION entries that share the same
ex data. This could result in double freeing the session data on the
server side.
Track the SSL_SESSION ex data in a separate list and free the
allocations only if they are pointing to a valid allocated wpabuf
pointer.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
When a station receives either a Beacon frame or a Probe Response frame
from an AP that contains an MBO element with the Association Disallowed
attribute, the station should prevent association to that AP. When using
passive scanning, it is possible for the scan results to contain the
latest information in the Beacon frame elements instead of the Probe
Response frame elements. That could result in using old information and
not noticing the AP having changed its state to disallowing new
associations.
Make it more likely to follow the AP's change to disallow associations
by checking the Beacon frame elements instead of Probe Response frame
elements if the scan results are known to contain newer information for
the Beacon frame.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
It can be helpful to know whether the information elements from the
Beacon frame or the Probe Response frame are newer when using BSS table
entries, so make this information known, if available. This allows the
Beacon frame elements to be preferred over the Probe Response frame
elements when desired.
Signed-off-by: Jouni Malinen <j@w1.fi>
As part of fixing CONFIG_NO_WPA_PASSPHRASE, whilst wpa_passphrase gets
built, its not installed during `make install`.
Fixes: cb41c214b7 ("build: Re-enable options for libwpa_client.so and wpa_passphrase")
Signed-off-by: Alex Kiernan <alexk@zuma.ai>
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
This feature does not work on all radios that advertise this feature
with the current driver implementation, and possibly some users don't
want to use it even if it works fine, so disable it by default for now,
but let users enable it as desired with enable_background_radar=1.
Signed-off-by: Ben Greear <greearb@candelatech.com>
The result (y2) was cleared and freed in error cases, but the pointer
itself was not cleared to NULL, so the error path would have returned a
pointer to freed memory. Fix this by properly clearing the return value
in error cases. In addition, simplify the function to avoid tracking
success case separately.
Signed-off-by: Jouni Malinen <j@w1.fi>
wc_HmacSetKey() seems to initialize everything that is needed for the
actual operation, but at least valgrind is reporting use of
uninitialized values when this was done on a data structure that was not
explicitly cleared.
Call wc_HmacInit() before wc_HmacSetKey() to avoid any unexpected
behavior from potentially uninitialized values.
Signed-off-by: Jouni Malinen <j@w1.fi>
SSL_CTX_set_dh_auto() is not available in BoringSSL even though it
claims to be based on OpenSSL 1.1.1 in OPENSSL_VERSION_NUMBER.
Fixes: ebb3055e13 ("OpenSSL: Generate DH parameters automatically if not set with dh_file")
Signed-off-by: Jouni Malinen <j@w1.fi>
Anything older than OpenSSL 1.0.2 should not be used anymore, so drop
the build compatibility options for those old versions.
Signed-off-by: Jouni Malinen <j@w1.fi>
Compilation was failing even with LibreSSL 2.7 versions, so there is no
point in maintaining these old compatibility options for older versions.
Signed-off-by: Jouni Malinen <j@w1.fi>
OpenSSL 3.0 has deprecated the low-level EC_KEY functionality, so use
the EVP API (EVP_EC_gen() and EV_PKEY_derive()) for the crypto_ecdh
wrappers.
Signed-off-by: Jouni Malinen <j@w1.fi>
OpenSSL 1.1.1 deprecated the function names with the _GFp postfix, so
move to the new function name. Add backwards compatibility wrappers for
older versions.
Signed-off-by: Jouni Malinen <j@w1.fi>
Sometimes there is a program error to send a large number of commands to
wpa_supplicant, and the source address can help quickly find the program
that sends commands.
Signed-off-by: xinpeng wang <wangxinpeng@uniontech.com>
