If a scan triggers a regdom update into a 6 GHz-allowed regdom, and an
RNR element in one of the legacy band scan results points to a 6 GHz
scan result with a short SSID matching the current_ssid, delay
connection in favor of a 6 GHz-only scan. This will optimize the case in
which we first connect to a 5 GHz AP, then later roam to a 6 GHz one by
directly connecting to the 6 GHz one.
Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
wpas_trigger_6ghz_scan() returns 1 on success and 0 on failure to
trigger the scan. Checking the return value to be less than zero is not
correct. This was supposed to check for success, i.e., greater than
zero.
Fixes: 42add3c27b ("Scan 6 GHz channels after change to 6 GHz-allowed regdom")
Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
In P2P_GROUP_ADD command and GroupAdd dbus method, frequency is passed
in as a parameter when restarting a persistent group. This is the group
operating frequency determined out of band. Use this pre-determined
frequency in P2P client as well to expedite the P2P scan.
Signed-off-by: Jintao Lin <jintaolin@chromium.org>
Expose whether a 6 GHz scan is in progress with the ScanInProgress6GHz
property and flush properties as soon as the property is updated, so
that platforms can choose not to disconnect while a 6 GHz scan is in
progress. Once the 6 GHz scan has completed and scan results have been
received, the ScanInProgress6GHz property is reset to false.
Signed-off-by: Ruth Mekonnen <rmekonnen@chromium.org>
When non_coloc_6ghz = false, the STA is expected to scan for colocated
APs. However, if the colocated AP is on a non-PSC channel, it will not
be detected during the 6 GHz-only scan because the frequency list is
limited to PSC channels. Even when the NL80211_SCAN_FLAG_COLOCATED_6GHZ
is set, the cfg80211 only scans a subset of the channels in the original
6 GHz scan request. Therefore, this patch adds non-PSC channels to the
original 6 GHz scan request.
Signed-off-by: Ruth Mekonnen <rmekonnen@chromium.org>
The test to scan for a single BSSID assumed that there is only a single
neighbor in the candidate list. Also do this optimization if there are
multiple neighbors but only one of them is valid.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
This tests that the candidate list is used even if it is not required
because the abridged and preferred candidate list included bits are not
set.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
The preferred candidate list included bit just makes parsing the list
mandatory. The AP may still include a candidate list which we should use
to be able to optimize scanning. As such, always parse out the list but
still verify that if the list is not empty if the bit is set.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
There was an ancient code path to trigger a scan that was apparently
forgotten when the code was extended over time. It does not make any
sense to trigger a scan twice, so remove the earlier scan.
The earlier scan call was avoiding to trigger a new scan if a fixed
BSSID is configured. This seems like a reasonable restriction to do, so
add this check before starting a scan.
Consolidate everything so that scanning happens at the end of the
functions unless we bail out before. Add a "reset" label for all other
cases to ensure that we don't leave things in the a bad state.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
The dialog token must be non-zero. We are using this fact internally to
track the state in some cases, so ensure that the assumption is valid.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
According to Multiband Operation specification (r17, section 3.5.2),
a BSS Transition Management Request with the disassociation imminent
bit set should always be accepted.
This is enforced in case the request did not include a candidate list.
However, in case a candidate list was included but none of the APs in
the candidate list was found in the scan results, the request is
rejected.
Fix that by always accepting a request with the disassociation imminent
bit set even if no roaming candidate was found.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Many of the WNM tests assume that the supplicant will only select a
neighbor that was included in the candidate list. However, without the
abridged bit being set, the supplicant is allowed to also select any BSS
that is not explicitly included in the list.
Prepare for the supplicant handling the abridged bit by setting it in
the tests where relevant.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Having it in wnm_is_bss_excluded() is more generic as it works for other
locations (e.g., MLD link selection). So move the test and add a check
for the abridged bit while at it. Note that without the abridged bit
check another check would be needed (e.g., checking wnm_dialog_token) to
ensure that there isn't a rejection unless a BTM is in progress.
compare_scan_neighbor_results() calls wpa_scan_res_match() which calls
wnm_is_bss_excluded() so the previous behavior is maintained for WNM
scan result processing.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Following commits will move more checks into wnm_is_bss_excluded().
Prepare for that by changing the logical flow so that further checks can
be inserted.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
compare_scan_neighbor_results() was taking an age parameter to check
whether the BSS has been seen recently. This was used historically in a
codepath when no new scan was done. However, the logic was changed in
commit 20ed289a78 ("WNM: Clean up old scan data processing") and the
parameter is not used at all anymore as it is replaced by a different
logic. Remove it.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
ieee802_11_rx_bss_trans_mgmt_req() is already dealing with a lot of
things including the decisions on how to act on the frame. Split out
candidate list parsing to make it easier to work with the function.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Commit 17a2aa822c ("WNM: Follow BTM procedure if the last link is
dropped") added code to store either the MLD MAC address or BSSID when
being disassociated. However, it did not save which one was stored
making the tests later on awkward.
Store whether it was an MLD MAC address or not and then do the test
accordingly.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Commit e508c070c4 ("WNM: Keep BTM information until connection
completes") changed the logic so that much of the information about a
transition management request will be kept around for longer. However,
doing this also implies that the scan logic can be called multiple times
with wnm_dialog_token being set.
Add a guard to bail out if the scan was not done for a BTM request. But,
add it after the transition candidate validity check so that we reset
the state when a new scan invalidated it.
However, invalidation does not make sense for any scan, primarily an ML
probe request during a connection attempt should not trigger
invalidation. So move the call to wnm_scan_process() further down in the
list to avoid issues.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Add a new vendor attribute
QCA_WLAN_VENDOR_ATTR_SCAN_SKIP_CHANNEL_RECENCY_PERIOD for sub command
QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN to skip the recently scanned
channels within specified time (in ms), thus reducing the number of
channels for requested scan.
Signed-off-by: Purushottam Kushwaha <quic_pkushwah@quicinc.com>
For MLO association, specify the destination address as the AP MLD MAC
address for sending EAPOL frames. Previously, this was set to the BSSID
in all cases (and hoped for the driver to map it to MLD MAC address when
needed).
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Add transition mode SSIDs to the SSID scan-list for bgscan. This is
currently missing and bgscan fails to scan for SSIDs on the OWE
transition network if one is currently used.
Signed-off-by: David Bauer <mail@david-bauer.net>
This allows to use the ROAM control interface command to force roaming
on a transition network. Previously, this was not possible, as the open
SSID is stored for the connection profile. Add a new function to also
return OWE transition networks if the profile SSID is set as the
transition-ssid for the OWE RSN network.
Signed-off-by: David Bauer <mail@david-bauer.net>
The value currently is simply incremented, but it must not
reach 255 and rather wrap around from 254 to 0, since in
the Reduced Neighbor Report 255 means unknown. Fix that.
Fixes: d95838b793 ("AP: Add support for testing ML link removal")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Link Id attribute is required for
qca_wlan_vendor_attr_external_acs_event to identify the link on which
the command is received for an AP MLD.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_LINKID attribute to the
ADD_STA_NODE command to identify a specific link affiliated to an AP
MLD.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add a new sub command QCA_NL80211_VENDOR_SUBCMD_AUDIO_TRANSPORT_SWITCH
to request the audio data transport switch in both the command and event
path. This is used when two or more audio data transports are available
between peers.
Signed-off-by: Purushottam Kushwaha <quic_pkushwah@quicinc.com>
The driver might delete the STA node details on receiving external auth
status. In SAE authentication failure case on the AP, an Authentication
frame with a failure status is sent to the driver after sending the
external auth status. Authentication frame transmission didn't have a
dependency with STA node details earlier, but with MLO, Authentication
frames should be transmitted using the link address for a given MLD MAC
address by the supplicant. Since MLD to link address translation is done
by the driver, the STA node details are required to transmit the
Authentication frame. Hence, send external auth status to the driver
after sending the Authentication frame.
SAE external auth was introduced in commit 4ffb0fefe4 ("hostapd:
Support external authentication offload in AP mode"), which requires the
change in order of sending Authentication frame and auth status in case
of failure when using MLO.
Signed-off-by: Vinay Gannevaram <quic_vganneva@quicinc.com>
Use the RSN Override Link KDE to include the override variants of the
RSNE/RSNXE for each link so that all variants are verifies when
processing the protected EAPOL-Key message 3/4.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This allows all variants to be verified based on a protected frame to
achieve robust downgrade protection.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This provides an implicitly protected (SNonce is used as an input to PTK
derivation) mechanism for a STA to indicate support for RSN overriding
in a manner that does not cause interopability issues with deployed APs.
In addition, update sm->SNonce on the Authenticator only based on
message 2/4 since that is the only EAPOL-Key message that is defined to
provide the actual SNonce value. While clearing of this internal buffer
on message 4/4 might not cause issues, it is better to keep the actual
SNonce value here since the SNonce cookie can be used at a later point
in the sequence.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This replaces the use of the RSNE Override and RSNE Override 2 elements
with empty payload to indicate which RSNE variant was used.
In addition, this adds stricter validation of the RSNE in
(Re)Association Request frame to allow only the pairwise cipher suites
and AKMs listed in the indicated RSNE variant to be used.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The separate RSNOE/RSNO2E/RSNXOE buffers were not actually used on the
Authenticator, so remove them.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
hostapd_eid_assoc_fils_session() might return NULL if memory allocation
fails. This NULL value then will be used for invalid calculation and
cause unspecified behavior or be dereferenced unexpectedly. Avoid this
with an explicit check of the returned pointer.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
Use else-if check for better clarity regarding usage of wpa_ie_buf3 to
make it explicit that memory is allocated for this pointer only once.
Signed-off-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
The new hostapd configuration parameter eapol_key_reserved_random=1 can
be used for testing STA/Supplicant functionality to accept a random
value in the Reserved field within EAPOL-Key frames.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This is convenient for testing STA behavior with various RSN element
combinations and special cases.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The RSNXE generation function was extended to support this earlier, but
that update was missed from the RSNXOE variant.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add an explicit rsn_override_omit_rsnxe=1 configuration parameter to
allow the RSNXE to be omitted when using the RSNXOE and wanting to
minimize interoperability issues with STAs that might recognize the
RSNXE, but not handle it correctly, e.g., when multiple octets of
payload is included.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
wpa_supplicant select_network() relies on fast_associate to reuse old
scan results. However, this approach does not apply in some cases in
Android:
1 - If the selected network is hidden, and the SSID is in Chinese,
Android switches between fallback SSIDs, necessitating a new scan for
switching between different hidden SSIDs.
2 - Similarly, if the selected SSID is OWE (Opportunistic Wireless
Encryption), and the OWE SSID bands have been changed, select_network()
requires a fresh scan to discover hidden OWE SSIDs.
To address these, enhance select_network() to trigger new scans instead
of relying on fast_associate. This improves network selection behavior
in Android.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
