Commit graph

15196 commits

Author SHA1 Message Date
Jouni Malinen
d2d444deef tests: Remove IAPP test case
This is in preparation for removal of the full IAPP functionality from
hostapd.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-11 12:30:28 +03:00
Jouni Malinen
d86d66dc07 AP: Silently ignore management frame from unexpected source address
Do not process any received Management frames with unexpected/invalid SA
so that we do not add any state for unexpected STA addresses or end up
sending out frames to unexpected destination. This prevents unexpected
sequences where an unprotected frame might end up causing the AP to send
out a response to another device and that other device processing the
unexpected response.

In particular, this prevents some potential denial of service cases
where the unexpected response frame from the AP might result in a
connected station dropping its association.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-11 12:28:37 +03:00
John Crispin
a84bf44388 HE: Send the AP's OBSS PD settings to the kernel
This allows us to send the OBSS PD settings to the kernel, such that the
driver can propagate them to the hardware/firmware.

Signed-off-by: John Crispin <john@phrozen.org>
2019-09-10 14:00:14 +03:00
Jouni Malinen
262b71eead Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2019-08-30.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-10 13:42:14 +03:00
Mikael Kanstrup
97d2d7ac1a tests: WPS MAC address change
Verify that MAC address of WPS M1 message use correct address
after address change.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sony.com>
2019-09-09 16:56:00 +03:00
Mikael Kanstrup
8788a314d7 WPS: Update MAC address on address changes
The WPS component keeps a copy of the network interface MAC address.
When MAC address is changed the WPS copy was not updated so WPS M1
message contained the old address. Some devices check this field
and fail connection attempts.

Update the WPS MAC address on interface MAC address changes.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sony.com>
2019-09-09 16:49:34 +03:00
Rosen Penev
39042d7f7c os_sleep: Use nanosleep for POSIX versions 2008 and higher
uClibc-ng optionally disabled deprecated POSIX functions like usleep,
causing compilation failures. This switches to nanosleep while retaining
support for older libcs that do not support nanosleep.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2019-09-09 16:45:40 +03:00
Jouni Malinen
a69742c2f8 wpa_cli: Do not pick p2p-dev-* interfaces by default
These are the driver-specific interface for the non-netdev P2P Device
interface and not something that useful for most use cases. Skip them to
allow the main netdev (e.g., wlan0 over p2p-dev-wlan0) to be selected.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-09 16:37:46 +03:00
Jouni Malinen
b3ba2556e7 tests: wpa_supplicant DPP-only build tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-08 18:07:22 +03:00
Jouni Malinen
d842e00bd6 SAE: Return result from confirm CN() operation to the caller
These functions could fail in theory, so report the result to the
caller.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-08 18:02:47 +03:00
Ankita Bajaj
a8bfc6fff2 FILS: Update connect params after sending connection notification
Update connect params will update auth_alg and fils_hlp_req in
wpa_supplicant structure before calling function
wpas_notify_state_changed(). This could have resulted in triggering
inconsistent state change events and messages in the Android framework.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-08 17:50:23 +03:00
Srinivas Dasari
0df82a3daf Correct the type/usage of QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST
Update the documentation of QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST
to make it a nested attribute to carry frequencies of type u32.
This is to be in sync with the nl80211 attribute
NL80211_ATTR_SCAN_FREQUENCIES.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-08 17:48:14 +03:00
Jouni Malinen
6bf6c6feca DPP: Fix hostapd build dependencies for DPP-only build
Fix CONFIG_DPP=y build for cases where the needed dependencies were not
pulled in by other optional build parameters.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-08 17:46:55 +03:00
Jouni Malinen
1eff2e7bf1 DPP2: Fix wpa_supplicant build dependencies for CONFIG_AP=y build
Fix CONFIG_DPP2=y with CONFIG_AP=y build for cases where the needed
dependencies were not pulled in by other optional build parameters.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-08 17:44:07 +03:00
Jouni Malinen
d2bae5763d DPP: Fix wpa_supplicant build dependencies for DPP-only build
Fix CONFIG_DPP=y build for cases where the needed dependencies were not
pulled in by other optional build parameters.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-08 17:39:43 +03:00
Jouni Malinen
7d2ed8bae8 Remove CONFIG_IEEE80211W build parameter
Hardcode this to be defined and remove the separate build options for
PMF since this functionality is needed with large number of newer
protocol extensions and is also something that should be enabled in all
WPA2/WPA3 networks.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-08 17:33:40 +03:00
Hu Wang
0229261874 DFS offload: Fix hostapd state and CAC info in STATUS output
With DFS offloaded to the driver, hostapd state and CAC info was not
updated in DFS-CAC-START event, so STATUS output showed wrong info. Fix
this by updating the CAC related state when processing the driver event.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-02 12:29:10 +03:00
Jouni Malinen
4d78ba9900 EAP-TEAP peer: Clear Phase 2 EAP method on new Identity exchange
This is needed to allow clean transition from one inner EAP
authentication method to another one if EAP method negotiation is needed
within Phase 2.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:43 +03:00
Jouni Malinen
70990138ec tests: EAP-TEAP with inner EAP-MSCHAPv2 user and EAP-TLS machine credentials
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:43 +03:00
Jouni Malinen
6816182461 EAP-TEAP peer: Add support for machine credentials using certificates
This allows EAP-TLS to be used within an EAP-TEAP tunnel when there is
an explicit request for machine credentials. The network profile
parameters are otherwise same as the Phase 1 parameters, but each one
uses a "machine_" prefix for the parameter name.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:43 +03:00
Jouni Malinen
ebee8232d3 Do not try to include net/ethernet.h in MinGW/Windows builds
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:43 +03:00
Jouni Malinen
bf15b15598 Fix Windows error code definition workaround
ENOTCONN, EOPNOTSUPP, and ECANCELED are defined in a newer version of
MinGW, so make this workaround conditional on what is defined in the
header files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:43 +03:00
Jouni Malinen
043de65f1c EAP peer config: Move ocsp param to phase1/phase2
OCSP configuration is applicable to each instance of TLS-based
authentication and as such, the configuration might need to be different
for Phase 1 and Phase 2. Move ocsp into struct eap_peer_cert_config and
add a separate ocsp2 network profile parameter to set this for Phase 2.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:35 +03:00
Jouni Malinen
e0ee87c706 tests: Too many EAP roundtrips (server)
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:35 +03:00
Jouni Malinen
8d76e0ad7b EAP server: Configurable maximum number of authentication message rounds
Allow the previously hardcoded maximum numbers of EAP message rounds to
be configured in hostapd EAP server. This can be used, e.g., to increase
the default limits if very large X.509 certificates are used for EAP
authentication.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:35 +03:00
Jouni Malinen
b99c4cadb7 EAP peer: Move certificate configuration params into shared struct
These parameters for certificate authentication are identical for the
Phase 1 (EAP-TLS alone) and Phase 2 (EAP-TLS inside a TLS tunnel).
Furthermore, yet another copy would be needed to support separate
machine credential in Phase 2. Clean this up by moving the shared
parameters into a separate data struct that can then be used for each
need without having to define separate struct members for each use.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-01 17:19:31 +03:00
Sven Eckelmann
6e711e7ab3 mesh: Do not enable HE on 5 GHz without VHT
The commit ad9a1bfe78 ("nl80211: Share VHT channel configuration for
HE") always enforced that VHT is enabled when HE was enabled. This broke
the mesh functionality on 2.4 GHz with HE because ibss_mesh_setup_freq()
isn't setting up the VHT parameters for 2.4 GHz.

This problem was resolved for 2.4 GHz by commit df4f959988 ("nl80211:
Don't force VHT channel definition with HE"), but it is still possible
to disable VHT during the mesh/IBSS freq setup on 5 GHz - which would
result in the same problem as seen on 2.4 GHz.

The code enabling HE for IBSS/mesh must now make sure that it doesn't
enable HE when VHT could be enforced by the nl80211 driver code but
disabled by the user.

Fixes: 3459c54ac7 ("mesh: Add support for HE mode")
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
2019-08-30 16:02:23 +03:00
John Crispin
0497e41481 HE: Fix HE Capabilities element size
Set the max value of optional bytes inside the data structure. This
requires us to calculate the actually used size when copying the
HE capabilities and generating the IE.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
2019-08-30 15:59:20 +03:00
Krishna Rao
a2e0cc9e09 Add nl80211 vendor ACS trigger reasons related to interference
Add the following ACS trigger reasons to enum
qca_wlan_vendor_acs_select_reason:
1) QCA_WLAN_VENDOR_ACS_SELECT_REASON_GENERIC_INTERFERENCE
       Generic, uncategorized interference found
2) QCA_WLAN_VENDOR_ACS_SELECT_REASON_80211_INTERFERENCE
       Excessive 802.11 interference found
3) QCA_WLAN_VENDOR_ACS_SELECT_REASON_CW_INTERFERENCE
       Continuous Wave (CW) interference found
4) QCA_WLAN_VENDOR_ACS_SELECT_REASON_MWO_INTERFERENCE
       Microwave Oven (MWO) interference found
5) QCA_WLAN_VENDOR_ACS_SELECT_REASON_FHSS_INTERFERENCE
       Frequency-Hopping Spread Spectrum (FHSS) interference found
6) QCA_WLAN_VENDOR_ACS_SELECT_REASON_NON_80211_FHSS_INTERFERENCE
       Non-802.11 Frequency-Hopping Spread Spectrum (FHSS) interference
       found
7) QCA_WLAN_VENDOR_ACS_SELECT_REASON_WB_INTERFERENCE
       Wideband (WB) interference found
8) QCA_WLAN_VENDOR_ACS_SELECT_REASON_NON_80211_WB_INTERFERENCE
       Non-802.11 Wideband (WB) interference found
9) QCA_WLAN_VENDOR_ACS_SELECT_REASON_JAMMER_INTERFERENCE
       Jammer interference found

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-30 15:46:18 +03:00
Jouni Malinen
69e8e7817e HS 2.0: Do not add two copies of OSEN element into Beacon/Probe Resp
OSEN element was getting added both through the Authenticator IEs
(before some non-vendor elements) and separately at the end of the
frames with other vendor elements. Fix this by removing the separate
addition of the OSEN element and by moving the Authenticator IE addition
for OSEN to match the design used with WPA so that the vendor element
gets added in the proper place in the sequence of IEs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-30 15:41:58 +03:00
Jouni Malinen
81d0759cba tests: Hotspot 2.0 open OSU association
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-30 15:25:07 +03:00
Jouni Malinen
a762ba8b1e HS 2.0 AP: Do not mandate PMF for HS 2.0 Indication in open OSU network
Even though the station is not supposed to include Hotspot 2.0
Indication element in the Association Request frame when connecting to
the open OSU BSS, some station devices seem to do so. With the strict
PMF-required-with-Hotspot-2.0-R2 interpretation, such connection
attempts were rejected. Relax this to only perform the PMF check if the
local AP configuration has PMF enabled, i.e., for the production BSS.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-30 15:22:42 +03:00
Jouni Malinen
65e2eb6e74 tests: Make nfc_wps more robust by avoiding race conditions
The hostapd side operations and data connectivity test were executed
without explicitly waiting for hostapd to report connection as having
been completed. This could result in trying to transmit data before
EAPOL-Key msg 4/4 was processed especially when using UML time-travel.
Make this more robust by waiting for hostapd to be ready before the data
test.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-24 22:52:52 +03:00
Jouni Malinen
12de149071 tests: Fix ap_ft_reassoc_replay for case where wlantest has the PSK
This test case was failing if wlantest was able to decrypt the CCMP
protected frames. Fix the tshark filter string to include only the
actually encrypted frames for PN comparison.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-24 19:20:40 +03:00
Jouni Malinen
e49ce2990f IEEE 802.1X authenticator: Coding style cleanup
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-24 19:15:25 +03:00
Jouni Malinen
31aaddc90d Clean up IEEE 802.1X authentication debug messages for EAP code
Merge the separate debug print with the text name of the EAP code into
the same debug line with the numerical value to clean up debug log.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-24 19:15:25 +03:00
Jouni Malinen
818ee96d58 tests: EAP-TEAP with user and machine credentials
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-24 17:02:54 +03:00
Jouni Malinen
71419119f4 EAP-TEAP peer: Fix protected indication of inner EAP method failure
Need to leave EAP-TEAP methodState == MAY_CONT when marking decision =
FAIL based on inner EAP method failure since this message will be
followed by protected failure indication.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-24 16:56:41 +03:00
Jouni Malinen
93cd29d2b8 EAP-TEAP server: Add support for requiring user and machine credentials
The new eap_teap_id=5 hostapd configuration parameter value can be used
to configure EAP-TEAP server to request and require user and machine
credentials within the tunnel. This can be done either with Basic
Password Authentication or with inner EAP authentication methods.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-24 16:49:51 +03:00
Jouni Malinen
f380464257 tests: Remove unnecessary "config exists" debug prints from build.sh
This is the common case and these prints do not really help and just
make the output from build.sh less clear.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-24 12:18:40 +03:00
Jouni Malinen
f3c188fa7d tests: Import helper functions directly from utils.py
These were moved from test_sae.py to utils.py, so import them from the
correct location instead of through test_sae.py that imports them from
utils.py.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-24 12:11:53 +03:00
Jouni Malinen
c38c62ff78 wlantest: Derive PMK-R1 and PTK for FT protocol cases
Track PMK-R0/PMK-R0-Name from the initial mobility domain association
and derive PMK-R1/PTK when the station uses FT protocol. This allows
frames from additional roaming cases to be decrypted.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-22 22:14:47 +03:00
Jouni Malinen
dbddbf1647 tests: Configure wlantest for FT+PMF test cases
It is useful to get the encrypted frames decrypted in the sniffer
capture for these test cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-22 22:13:02 +03:00
Jouni Malinen
4619dc0607 tests: EAP-TEAP with machine username/password credential
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 13:24:14 +03:00
Jouni Malinen
c41936566e EAP-TEAP peer: Add support for machine authentication
This allows a separate machine credential to be used for authentication
if the server requests Identity-Type = 2 (machine).

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 13:24:14 +03:00
Jouni Malinen
c724a0a16c EAP peer: Add a concept of a separate machine credential
This is an initial step in adding support for configuring separate user
and machine credentials. The new wpa_supplicant network profile
parameters machine_identity and machine_password are similar to the
existing identity and password, but explicitly assigned for the purpose
of machine authentication.

This commit alone does not change actual EAP peer method behavior as
separate commits are needed to determine when there is an explicit
request for machine authentication. Furthermore, this is only addressing
the username/password credential type, i.e., additional changes
following this design approach will be needed for certificate
credentials.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 13:24:14 +03:00
Jouni Malinen
0b39274ca3 tests: Update authsrv_oom to match implementation changes
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 02:59:06 +03:00
Jouni Malinen
9ce3bfaf47 RADIUS server: Abort startup on allocation failures
Be more consistent on checking all parameter allocation and copying
steps within radius_server_init() and abort startup if anything fails
instead of trying to continue with other parts of the configuration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 02:57:58 +03:00
Jouni Malinen
fa1f0751cc RADIUS server: Use struct eap_config to avoid duplicated definitions
Use struct eap_config as-is within RADIUS server to avoid having to
duplicate all the configuration variables at each interface. This
continues cleanup on struct eap_config duplication in hostapd.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 02:33:12 +03:00
Jouni Malinen
a00cb1b1f5 EAP-TEAP server: Fix eap_teap_pac_no_inner configuration
This was not passed correctly to the EAP server code when using hostapd
internal EAP server.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 02:13:22 +03:00