Commit graph

10370 commits

Author SHA1 Message Date
Jouni Malinen
b6e5e14fd4 EAP-FAST peer: Fix PAC parser error messages
Do not override the parsing error with the "PAC block not terminated
with END" message if the reason for the END line not yet being seen is
in failure to parse an earlier line.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-12 12:00:28 +02:00
Jouni Malinen
5b904b3e42 EAP-FAST: Check T-PRF result in MSK/EMSK derivation
Pass the error return from sha1_t_prf() to callers.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-12 11:20:05 +02:00
Jouni Malinen
b1d8c5ce6a EAP-FAST peer: Fix error path handling for Session-Id
It was possible to hit a NULL pointer dereference if Session-Id
derivation failed due to a memory allocation failure.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-12 11:12:32 +02:00
Jouni Malinen
36478a16e6 OpenSSL: Support new API for HMAC/EVP_MD_CTX in OpenSSL 1.1.x-pre1
The EVP_MD_CTX and HMAC_CTX definitions are now hidden from applications
using OpenSSL. Fix compilation issues with OpenSSL 1.1.x-pre1 by using
the new API for allocating these structures.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-10 18:11:39 +02:00
Jouni Malinen
1025603b3f tests: FT PTK rekeying triggered by AP/station after roam
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-10 00:14:36 +02:00
Jouni Malinen
9257610a6e FT: Fix FTIE generation for EAPOL-Key msg 3/4
This FTIE needs to be an exact copy of the one in (Re)Association
Response frame. Copy the stored element rather than building a new copy
that would not have the correct MIC value. This is needed to fix PTK
rekeying after FT protocol run.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-10 00:14:36 +02:00
Jouni Malinen
e44bd28cd1 FT: Fix sm->assoc_resp_ftie storing on the AP side
The FTIE from (Re)Association Response frame was copied before
calculating the MIC. This resulted in incorrect value being used when
comparing the EAPOL-Key msg 2/4 value in case PTK rekeying was used
after FT protocol run. Fix this by storing the element after the MIC
field has been filled in.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-10 00:14:35 +02:00
Jouni Malinen
59e78c2408 FT: Fix FTIE generation for 4-way handshake after FT protocol run
wpa_insert_pmkid() did not support cases where the original RSN IE
included any PMKIDs. That case can happen when PTK rekeying through
4-way handshake is used after FT protocol run. Such a 4-way handshake
used to fail with wpa_supplicant being unable to build the EAPOL-Key msg
2/4.

Fix this by extending wpa_insert_pmkid() to support removal of the old
PMKIDs, if needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-10 00:14:35 +02:00
Jouni Malinen
cc02fd3eff tests: Make pmksa_cache_opportunistic_connect more robust
This test case could fail if the cfg80211 scan cache brought in a BSS
entry from an earlier test case and a new scan did not get executed
prior to the ROAM command. Fix this by forcing the scan to go through
prior to roaming to AP2

This issue showed up with the following test case sequence:
connect_cmd_roam pmksa_cache_opportunistic_connect

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 20:31:18 +02:00
Jouni Malinen
b0ecbd3a4a AP: Use more readable version of management group cipher in error cases
This makes it easier to interpret AP side debug log for a case where a
station specifies in unsupported management group cipher.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 20:01:05 +02:00
Jouni Malinen
0ceff76e7b tests: WPA2 AP processing of RSN IE differences
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 20:00:10 +02:00
Jouni Malinen
651c6a84af Add TEST_ASSOC_IE for WPA/RSN IE testing on AP side
The new wpa_supplicant control interface command "TEST_ASSOC_IE
<hexdump>" can now be used to override the WPA/RSN IE for Association
Request frame and following 4-way handshake to allow protocol testing of
AP side processing of WPA/RSN IE.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 19:33:16 +02:00
Jouni Malinen
8eb45bde38 tests: Write GTK locations into debug log in key_lifetime_in_memory
It looks like it is possible for the GTK to be found from memory every
now and then. This makes these test cases fail. Write the memory
addresses in which the GTK was found to the log to make it somewhat
easier to try to figure out where the key can be left in memory.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 17:48:43 +02:00
Jouni Malinen
1d32bc2c1c tests: Make dbus_wps_oom more robust
It was possible for the BSSs object property change signal to be
generated during the OOM test case for Get(). If that happened, the
signal was not sent out, but the following Get(BSSs) operation succeeded
unexpectedly which resulted in a test failure. Make this less likely to
happen by waiting 50 ms between the scan and Get(BSSs) operation. This
should be sufficient to cover most cases since wpa_supplicant uses 5 ms
timeout for D-Bus property changed updates.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 17:10:06 +02:00
Jouni Malinen
bc321e1597 tests: Make ap_max_num_sta_no_probe_resp more robust
It was possible for the AP's Beacon frame to be seen by dev[0] when
running a scan. This is not an error case. Make this test case more
robust by verifying with a sniffer whether a Probe Response frame was
sent to unexpected STA.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 13:38:18 +02:00
Jouni Malinen
58059e6c0c FST: Print debug entry on MB IE update based on EVENT_AUTH
This is more consistent with all the other callers of
wpas_fst_update_mbie().

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 12:53:24 +02:00
Jouni Malinen
ce96e65cb7 tests: D-Bus vendor element operations
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 12:50:41 +02:00
Avichal Agarwal
af041f997d dbus: Add support for vendor specific elements
The new methods are
1. VendorElemAdd "i" "ay" i=integer ay=array of bytes
2. VendorElemGet "i" i=integer (output array of bytes)
3. VendorElemRem "i" "ay" i=integer ay=array of bytes

These provide functionality similar to the control interface commands
VENDOR_ELEM_ADD, VENDOR_ELEM_GET, and VENDOR_ELEM_REMOVE.

Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com>
Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
Signed-off-by: Dilshad Ahmad <dilshad.a@samsung.com>
[VendorElemGet to return array of bytes instead of string; cleanup]
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 12:50:13 +02:00
Jouni Malinen
b4e1e99577 tests: EAP-PSK local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 11:13:12 +02:00
Jouni Malinen
4073ef22ae tests: EAP-IKEv2 local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 00:39:27 +02:00
Jouni Malinen
5c8acf7d96 EAP-IKEv2: Check HMAC SHA1/MD5 result
Make the IKEv2 helper functions return a possible error return from the
HMAC routines.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-05 21:49:04 +02:00
Jouni Malinen
d1341917ce tests: WPS and fragment ack OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-05 21:35:45 +02:00
Matt Woods
7b991b47eb Use proper build config for parsing proxy_arp
In the definition of struct hostapd_bss_config, proxy_arp isn't affected
by the macro CONFIG_HS20. In addition, proxy_arp is not described in the
section of Hotspot 2.0 in the file hostapd.conf. The item proxy_arp
should be decided its action area by the macro CONFIG_PROXYARP which is
used to select whether the needed function gets included in the build.

Signed-off-by: Matt Woods <matt.woods@aliyun.com>
2015-12-05 21:03:00 +02:00
Jouni Malinen
96bf8fe104 tests: PKCS #8 private key with PKCS #5 v1.5 and v2.0 format
This verifies client private key use in encrypted PKCS #8 format with
PKCS #5 v1.5 format using pbeWithMD5AndDES-CBC and PKCS #5 v2.0 format
using PBES2 with des-ede3-cbc.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-05 20:27:27 +02:00
Jouni Malinen
4db29e6a8a TLS: Add support for PKCS #5 v2.0 PBES2
This extends the internal TLS support for PKCS #5 v2.0 PBES2 private key
format with des-ede3-cbc encryption and PBKDF2 SHA-1.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-05 20:23:12 +02:00
Jouni Malinen
b134397b11 tests: P2P persistent group formation, re-invocation, and cancel
Verify that P2P_CANCEL gets rejected on fully re-invoked persistent
group. This did not work properly before the last couple of commits and
before this week, the P2P_CANCEL on a separate group interface in P2p
Client role could result in use of freed memory and process termination.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 23:15:11 +02:00
Jouni Malinen
bf3214b593 P2P: Fix re-invoked client interface completion on data connection
This was already working for the case where a separate group interface
is used due to the recent commit
328f49acfe ('P2P: Complete group formation
on client data connection'). However, the case of no separate group
interface was used did not clear the interface state properly on data
connection. Fix this by setting the group formation information in
wpas_start_p2p_client().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 23:11:10 +02:00
Jouni Malinen
63502c64e1 P2P: Fix P2P_CANCEL for p2p_in_invitation case
Commit f05cee9714 ('P2P: Clear
p2p_in_invitation on cancel') added a wpas_p2p_cancel() case to call
wpas_p2p_group_formation_failed() if wpa_s->p2p_in_invitation is set.
This is done in a loop going through wpa_s->next pointers. However, the
call here can result in removing the interface and freeing wpa_s. The
following attempt to read wpa_s->next is from freed memory and that can
result in process termination when using a separate P2P group interface
and issuing P2P_CANCEL on a group that was started through re-invocation
of a persistent group.

The recent commit 328f49acfe ('P2P:
Complete group formation on client data connection') "fixed" this by
accident since wpa_s->p2p_in_invitation gets cleared in the sequence
that could hit this issue and this results in P2P_CANCEL getting
rejected. However, the real bug here is in the loop that continues after
possible wpa_s instance deletion. Fix that by breaking out of the loop.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 22:49:59 +02:00
Jouni Malinen
f98b0e5806 tests: Make tests using multi_check() more robust
It was possible for a cached scan entry in cfg80211 from an earlier test
case to show up while verifying that the disabled AP does not show up in
scan results. This could result in invalid test failures, e.g., when
running test cases "ap_require_ht ap_multi_bss_config" multiple times
(depends a bit on timing). Make this less likely to occur by explicitly
clearing the scan cache and by stopping wlan1 from trying to associate
before stopping ap_required_ht* test cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 21:03:43 +02:00
Jouni Malinen
e007d538cd EST: Comment out X509_REQ_print calls on Android with BoringSSL
These were restored into BoringSSL in June 2015, but not all Android
branches include those changes. To fix the build, comment these call out
on Android for now if hs20-osu-client is built against BoringSSL. These
are used only for debugging purposes, so this is fine for Hotspot 2.0
functionality.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 20:08:31 +02:00
Jouni Malinen
e6f4832737 EST: Add CSR generation support with BoringSSL
This completes EST support with hs20-osu-client when built with
BoringSSL instead of OpenSSL.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 20:08:31 +02:00
Jouni Malinen
ed2566ac9b EST: Implement pkcs7_to_cert() with BoringSSL
This adds one more step in completing hs20-osu-client support when using
BoringSSL instead of OpenSSL. EST client can now parse the cacerts file.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 20:08:31 +02:00
Jouni Malinen
8d27efa814 HTTP (curl): OCSP with BoringSSL
This adds experimental support for using OCSP with libcurl that is built
against BoringSSL. This needs small modifications to libcurl to allow
CURLOPT_SSL_VERIFYSTATUS to be used to call
SSL_enable_ocsp_stapling(connssl->handle) in ossl_connect_step1().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 20:08:31 +02:00
Jouni Malinen
213e158ca8 BoringSSL: Move OCSP implementation into a separate file
This makes it easier to share the OCSP implementation needed for
BoringSSL outside tls_openssl.c. For now, this is mainly for
http_curl.c.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 20:08:31 +02:00
Jouni Malinen
f846211e3e BoringSSL: Support new SHA_CTX definition for EAP-SIM PRF
BoringSSL modified the struct sha_state_st (SHA_CTX) definition by
converting h0..h4 with h[5] array. This broke wpa_supplicant/hostapd
build with EAP-SIM enabled. BoringSSL restored the old version for
ANDROID builds, but only the new version is currently defined for
non-Android cases. For now, fix this by having matching selection in
fips_prf_openssl.c based on OPENSSL_IS_BORINGSSL and ANDROID defines.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 11:30:36 +02:00
Jouni Malinen
b34c623c07 OpenSSL: Fix build with current OpenSSL master branch snapshot
OpenSSL 1.1.x will apparently go out with "SSLeay" renamed in the API to
"OpenSSL", which broke the build here for fetching the version of the
running OpenSSL library when wpa_supplicant/hostapd is built against the
current OpenSSL snapshot.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-03 23:53:35 +02:00
Jouni Malinen
d887ed3f95 tests: Fix ap_wps_er_multi_add_enrollee cleanup steps
Only one of the ERs was stopped at the end of the test case and this
could result in the following test case failing, e.g., when executing
this test case sequence: ap_wps_er_multi_add_enrollee ap_wps_upnp.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 18:19:39 +02:00
Jouni Malinen
2c68ae2b21 tests: Remove forgotten print from gas_anqp_oom_hapd
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 13:32:59 +02:00
Jouni Malinen
be4a0d0d5a tests: Make autogo_join_auto_go_neg more robust
It was possible for this test case to fail if the single attempt of
discovering the peer as part of the scan for join failed. This test case
was useful in combination with another test case:
ap_hs20_fetch_osu autogo_join_auto_go_neg

However, there is now an explicit test case (discovery_after_gas) for
this, so autogo_join_auto_go_neg can be made more robust without losing
testing coverage.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 12:37:12 +02:00
Jouni Malinen
3bba9c71c5 tests: P2P device discovery after fragmented GAS/ANQP exchange
This verifies cfg80211/mac80211 offchannel TX cancellation steps.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 12:37:12 +02:00
Jouni Malinen
759a8a3a99 nl80211: Cancel all pending TX frame cookies
These needs to be cancelled so that the kernel driver does not get left
with all old entries blocking other offchannel operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 12:37:10 +02:00
Jouni Malinen
850e054c0f tests: EAP-EKE local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-01 01:09:28 +02:00
Jouni Malinen
9ea91cd67c EAP-EKE peer: Fix memory leak on error path
If DHComponent_P derivation fails (local crypto operation failure), the
message buffer was not freed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-01 00:20:25 +02:00
Jouni Malinen
34b164dd25 tests: Fix p2p_go_move_scm_peer_does_not_support to clear avoid freqs
The P2P channel list on dev[1] at the end of
p2p_go_move_scm_peer_does_not_support was empty because all of the 2.4
GHz band got disabled by the simulated avoid frequencies driver event.
That channel list needs to be cleared prior to resetting regulatory
domain back to world roaming to get the P2P channel list updated
properly for the following test cases.

This was triggered by the following test case sequence:
p2p_go_move_scm_peer_does_not_support persistent_group_and_role_change

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 22:06:54 +02:00
Jouni Malinen
53b2100a3f tests: P2P group formation timeout with cfg80211 P2P Device
Verify that both the GO and P2P Client processing of P2P group formation
timeout removes the correct group.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 21:38:23 +02:00
Jouni Malinen
328f49acfe P2P: Complete group formation on client data connection
This was already the case in the GO role where the first client
connection is waited before marking
wpa_s->p2p_go_group_formation_completed = 1 and clearing
wpa_s->global->p2p_group_formation. However, in the P2P Client role,
that was done already at the completion of the WPS exchange. This can be
problematic since group formation timeout may still try to clear the
group and with wpa_s->global->p2p_group_formation == NULL, the correct
group interface may not be found.

Fix this by postponing clearing of wpa_s->global->p2p_group_formation on
the P2P Client side until the data connection has been completed and
group is declared started.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 21:35:16 +02:00
Jouni Malinen
5549bead85 Revert "tests: Dynamic hwsim p2ps_channel_active_go_and_station_different_mcc"
This reverts commit 78fdab307e. This test
case needs MCC support on two stations, so the earlier attempt to handle
this with one dynamic interface is not sufficient.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-30 19:58:07 +02:00
Jouni Malinen
45e8a45bb5 tests: Show vm-run.sh command line for re-running failure sequences
Now that vm-run.sh supports a long list of test cases without crashing
the VM kernel, there is no need to use the "parallel-vm.py -1 1 <tests>"
workaround. Print the re-run example commands with vm-run.sh instead. In
addition, add the --long argument if it was specified for the test run
to avoid skipping test cases in the re-run case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 19:42:56 +02:00
Jouni Malinen
6a5f578cac tests: Force concurrent exchange in ap_wps_er_multi_add_enrollee
This makes it more likely for the two ERs to go through WPS UPnP
exchange in parallel. This was already happening every now and then and
resulted in failures. However, now that there is support for multiple
concurrent exchanges, it is useful to have this test case hit that
possibility more frequently.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 16:58:47 +02:00
Jouni Malinen
0e559dc5ad WPS: Support parallel UPnP WPS protocol runs
This allows multiple external registrars to execute a WPS protocol run
with a WPS AP over UPnP. Previously, hostapd supported only a single WPS
peer entry at a time and if multiple ERs tried to go through a WPS
protocol instance concurrently, only one such exchange could succeed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 16:57:11 +02:00