Even though the radio work has started here, kernel might not have
started ROC (i.e., the REMAIN_ON_CHANNEL event has not yet been
received). Wait a bit to increase likelihood of everything being ready
for the following DPP operation.
Signed-off-by: Jouni Malinen <j@w1.fi>
At least with UML time-travel, it is possible for the response frame to
be received before the TX status of the request is delivered. Such a
sequence resulted in run_req_beacon() dropping the response event and
the following step failing due to a missing event. Avoid this by caching
the received response in run_req_beacon() and returning them to the
caller.
Signed-off-by: Jouni Malinen <j@w1.fi>
Wait some time before requesting disconnection to allow hostapd to
complete 4-way handshake processing. Wait some time after disconnection
has been completed on the STA before trying to use SAE again with the AP
so that hostapd has a chance to complete disconnection with UML
time-travel.
Signed-off-by: Jouni Malinen <j@w1.fi>
The underlying driver can reject only specific links in an association
request. In that case we will only ignore the corresponding BSS. Add a
test for this flow by simulating an association failure on the second
link specifically.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Test ML association, automatic link discovery using ML probe requests
and marking BSSs as failed after an ML association failure, if the
corresponding link also rejected the association.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Also check that we can discover BSSs requests using ML probe requests.
Note that this requires a new enough mac80211 which parses the ML probe
request and reports the contained BSSs.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Going through everything to test parsing of the basic ML element and the
RNR element is not really feasible for MBSSID mode. As such, add a unit
test to excercise parsing the available links from the RNR, basic ML
element and MBSSID-Index element if present.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Having the ability to trigger multiple failures in one test can be
useful. Add support to the test infrastructure to do this.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
These were either sending the command to the wrong
hostapd/wpa_supplicant instance or using the wrong command. This
currently causes the wait to just immediately stop, but with future
commits it would start failing.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Future commits change the related code and exception string. Avoiding
using the context is easy here and actually avoids two layers of
nesting.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
IEEE P802.11be/D4.0, 9.4.2.312.2.3 states that the AP MLD ID should only
be included in some ML probe responses. Beacon frames shouldn't include
AP MLD ID.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
With more channels now available in some regulatory domains, some scan
operations can take longer. Give them more time to complete in tests.
For two cases this required adding a timeout parameter to connect(),
which is then passed through.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Test functionality in cases where MBSSID is used with a WPA2-Personal
only BSS as the transmitted BSS and WPA3-Personal BSS as the
nontransmitted BSS.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Otherwise the station or AP might be doing router advertisements,
causing keep alive already without the mechnism that is being tested.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
dpp_config_legacy_gen_two_conf_psk and dpp_config_legacy_gen_two_conf
tried to set a DPP parameter before having verified that CONFIG_DPP was
used in the build.
Signed-off-by: Jouni Malinen <j@w1.fi>
Starting a thread to initiate DPP before starting the responder through
sigma_dut can result in unexpected testing behavior since there may not
be enough time to get the responder enabled before timing out som
initiator actions. Wait a second at the beginning of the initiator
thread in dpp_init_conf() similarly to how this was handled in other
initiator-from-thread cases.
Signed-off-by: Jouni Malinen <j@w1.fi>
Wait for stdout/stderr in a more robust manner to avoid blocking the
pipes and kill the sigma_dut process if it fails to terminate cleanly.
Signed-off-by: Jouni Malinen <j@w1.fi>
Responder receives Authentication Request and Config Request in a
sequence and it is possible for the Config Request to be received before
MGMT_RX_PROCESS has been processed for Authentication Request in the
cases where the test script is in the middle of RX processing. This can
result in DPP-AUTH-SUCCESS being delivered only after the MGMT-RX event
for Config Reques which means that wait_auth_success() would lose that
MGMT-RX event.
Avoid this issue by caching the "extra" MGMT-RX event within
wait_auth_success() and having the caller verify if the Config Request
(GAS Initial Request) has already been received before waiting to
receive it.
This makes dpp_gas, dpp_gas_comeback_after_failure, and
dpp_gas_timeout_handling more robust.
Signed-off-by: Jouni Malinen <j@w1.fi>
UML time travel allows the deauthentication event to be processed more
quickly than the delivery of EAP-Success to the client through the test
script, so accept either sequence here.
Signed-off-by: Jouni Malinen <j@w1.fi>
connect_network() tried to make test log more readable with a
dump_monitor() call at the end of the function. However, this could end
up practically dropping an event that arrives more or less immediately
after CTRL-EVENT-CONNECTED. This could happen with UML time travel,
e.g., in suite_b_192_pmksa_caching_roam.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Wait for hostapd connection event before issue HS20_WNM_NOTIF to avoid a
race condition with UML time travel.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This event may be sent before CTRL-EVENT-CONNECTED, so modify the test
cases to wait directly for TRANSITION-DISABLE by skipping the separate
wait for CTRL-EVENT-CONNECTED.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
It is possible for the sigma_dut process to be scheduled in a manner
that ends up combining the status,RUNNING and status,COMPLETE lines into
a single TCP message. This was supposed to be handled in the
sigma_dut_cmd() implementations, but that design had been broken by code
refactoring that changed the indentation level incorrectly.
Fixes: d68946d510 ("tests: sigma_dut and DPP push button first on Enrollee")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Use more specific condition for the allocation failure to allow
wpa_supplicant_trigger_scan() implementation to be modified without
making this test case fail.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Wait for allocation failure using wait_fail_trigger() instead of waiting
for a scan failure event since that failure event will go away with
implementation change.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add SKB tracing (which shows now why/where a frame was dropped
in the stack), and also -T for stack trace at each event.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Give the AP some time to set up stations fully (in the
kernel) so that traffic forwarding will work.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
