Wait for hostapd to complete STA authorization before running the
connectivity test between two associated STAs.
Signed-off-by: Jouni Malinen <j@w1.fi>
The check for extra data was not dereferencing the pointer, but avoid
complaints about such uses by freeing the decrypted data only after the
check. The hexdump could have read freed memory, so that needs to be
before the freeing.
Fixes: 54ac6ff8c4 ("PKCS 1: Add function for checking v1.5 RSA signature")
Signed-off-by: Jouni Malinen <j@w1.fi>
Even though this function is documented to always return 1, be more
consistent in checking that to avoid warnings from static analyzers.
Signed-off-by: Jouni Malinen <j@w1.fi>
This memcpy was causing warnings from static analyzers since it is being
misinterpreted as copying all the data into the lnkid.bssid[] array
instead of that and the following arrays. Since the copy is not needed
at all, just use the original pointer to get rid of these warnings.
Signed-off-by: Jouni Malinen <j@w1.fi>
Verify that sta is not NULL before calling
hostapd_process_assoc_ml_info() that references this parameter. In
theory, sta might be NULL here if addition of the STA entry failed in
the 60 GHz case.
Signed-off-by: Jouni Malinen <j@w1.fi>
This line seemed to trigger SIGSEGV in some code coverage testing cases.
It is not exactly clear how that was possible, but just in case, check
that iface->current_mode is set before using it here.
Signed-off-by: Jouni Malinen <j@w1.fi>
During scan results matching for connection skip BSS entries for the
current connection if disassociation imminent is set.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
If the BSS TM Request for imminent BSS temoval is for a non-AP MLD that
has multiple affiliated links, do not schedule full disconnection since
other links remain associated.
Signed-off-by: Jouni Malinen <j@w1.fi>
Allow link removal imminent indication to be added with the new
link_removal_imminent=1 parameter to BSS_TM_REQ.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Instead of rejecting the request, accept it since the AP MLD is in
control of which links are available and we are not being fully
disconnected in this case.
Signed-off-by: Jouni Malinen <j@w1.fi>
Based on IEEE P802.11be/D5.0, when a station is non-AP MLD with more
than one link the combination of the Link Removal Imminent field set to
1 and the BSS Termination Included field set to 1 means than only one of
the links is removed while the other links will remains associated.
Handle this case without starting a scan to find another BSS.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
When the AP MLD sends an Action frame to a non-AP MLD, use the AP MLD
MAC address instead of the local AP address (BSSID).
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Allow frames where the SA is the AP MLD MAC address as the driver might
have performed address translation.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
When the AP is configured to operate as an AP MLD, use the AP MLD MAC
address when needed for transmission of WNM Action frames.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
For wpa_supplicant based SAE/OWE connection, the wpa_supplicant state
machine is aware of the PMKID created for a connection and this gets
removed when "REMOVE_NETWORK all" is called. However, when SAE/OWE
offload is enabled, wpa_supplicant is not aware of the PMKID generated
by the driver/firmware. So add PMKSA del indication to the driver from
remove_network context so that the driver can free PMKs associated with
the SSID.
Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com>
The bgscan_init() declared wrongly when CONFIG_BGSCAN is not defined,
fix that.
Fixes: 3139270903 ("bgscan: Add global bgscan configuration")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
If ioctl() returns EBUSY on the command SIOCBRADDIF, the interface might
have already been added to the bridge by an external operation (e.g.,
netifd in OpenWrt), and linux_br_add_if() should not indicate an error.
Check whether the interface is correctly brigded when ioctl()
returns EBUSY and if so, report success.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Otherwise any new scan result (even manual ones if they do not set
use_id=X to a non-zero value), can cause a reconnect to the same BSS
when MLO is used. This is because the current BSS is not detected by
wpa_supplicant_need_to_roam() and it assumes that roaming is needed.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Remove a spurious \tab char in hostapd_eid_rnr() between arguments to a
function.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
In case the TBTT information is reporting about an AP in the same AP MLD
as the current AP, the AP MLD ID in the MLD Parameters subfield should
be set to 0.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Earlier refactoring of ibss_mesh_setup_freq() ended up dropping the case
where HE would be enabled without VHT on the 2.4 GHz band. Add that back
to allow HE to be used on 2.4 GHz with IBSS and mesh.
Fixes: 64043e6156 ("Split ibss_mesh_setup_freq() into multiple functions")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Link ID needs to be specified for MLD case when doing channel switch.
Add it to the driver command.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
Add support for reload_config hostapd_cli command as an alternative
mechanism for SIGHUP on the hostapd process.
When AP parameters such as ssid/encryption/password etc. are changed
externally in hostapd.conf, RELOAD_CONFIG cli will re-read the .conf,
update the in-memory contents and issue a change_beacon to update
beacon_ies.
For full config update, the following example sequence of commands can
be used:
hostapd_cli -i ath0 -p /var/run/hostapd-wifi0 disable
hostapd_cli -i ath0 -p /var/run/hostapd-wifi0 reload_config
hostapd_cli -i ath0 -p /var/run/hostapd-wifi0 enable
Signed-off-by: Sai Pratyusha Magam <quic_smagam@quicinc.com>
It can take significant amount of time to find the peer in this type of
a case where an AP connection is forced on a different channel while
going through p2p_find on both devices.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
DPP initiator will try three channels in this sequence and it can take
very close to the previously used five second timeout before being able
to try on the actual operating channel of the AP. This could result in
the test case failing unnecessarily. Increase the timeout to avoid this.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Avoid potential race condition in ap_cipher_tkip_countermeasures_ap by
sending the first test frame only after the AP has completed processing
the 4-way handshake and also wait a bit to allow the group key handshake
to be completed.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
If a tests hits a WARN_ON_ONCE then the retriggering will make it appear
to pass, since the warning will not happen again. Make this more
reliable by resetting the states at the beginning of each test.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The kernel has an asynchronous work to enable TX, which hasn't always
run by the time we get to TX tests. Do a sysfs read from the carrier
file before TX, on newer kernels this synchronises the needed state.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It looks like the lifetime_in_memory test cases can hit a read failure
(Errno 5 - Input/output error) every now and then, so skip memory areas
that report that, but go through all readable process memory.
Signed-off-by: Jouni Malinen <j@w1.fi>
There are different CHAN_SWITCH flows for DFS and non-DFS channels.
Non-DFS one saves previous BW value in iface->conf, but DFS flow
replaces it with a new user requested value. Setting a non-DFS channel
after a DFS one with BW = 160 would have resulted in a mismatch between
the saved BW and vht_capab (if VHT160 was not included by default). This
would have led to a check fail in the hostapd_set_freq_params()
function.
Signed-off-by: Dmitrijs Martinovs <dmartinovs@maxlinear.com>
Wait for AP/GO to complete processing before taking the next step in a
test instead of waiting just for STA. This avoids race conditions with
UML time-travel.
Signed-off-by: Jouni Malinen <j@w1.fi>
The remaining lifetime of the PMKSA entry is decreasing, so need to
allow it to differ between the old and new entries.
Signed-off-by: Jouni Malinen <j@w1.fi>
Avoid race condition with TX status reporting for the broadcast
Deauthentication frame. This could be delivered after the SET command
for ext_mgmt_frame_handled=1 and as such, could result in an
MGMT-TX-STATUS event that would confuse the next step in the test.
Signed-off-by: Jouni Malinen <j@w1.fi>
