Commit graph

2604 commits

Author SHA1 Message Date
Andrei Otcheretianski
5f5db9366c AP: MLO: Process Multi-Link element from (Re)Association Request frame
Implement processing of the Multi-Link element in the (Re)Association
Request frame, including processing of the Per-STA Profile subelement.

After handling the basic parsing of the element and extracting the
information about the requested links, handle the link specific
processing for each link:

- Find the interface with the corresponding link ID.
- Process the station profile in the interface.
- Prepare the Per-STA Profile subelement to be included in the
  Multi-Link element in the (Re)Association Response frame.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2023-06-08 20:31:20 +03:00
Andrei Otcheretianski
d924be3bd0 AP: AID allocation for MLD
Find an AID that is unused on all the affiliated links when assigning an
AID to a non-AP MLD.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2023-06-08 18:20:04 +03:00
Andrei Otcheretianski
11a607d121 AP: Fill MLO information in struct hostapd_sta_add_params
Provide MLO information when adding a new station to the driver.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2023-06-07 21:12:47 +03:00
Andrei Otcheretianski
bcbe80a66a AP: MLO: Handle Multi-Link element during authentication
In case the AP is an AP MLD, parse the Multi-Link element from the
Authentication frame, store the relevant information, and prepare the
response Multi-Link element.

If the AP is not an AP MLD or the parsing of the element fails, continue
the authentication flow without MLD support.

For SAE, it is needed to skip various fixed fields in
the Authentication frame. Implement it for SAE with H2E.

TODO: This should be extended to other authentication algorithms which
are allowed for MLD connections and have fixed fields in the
Authentication frames, according to IEEE P802.11-REVme/D3.0, Table 9-69
(Presence of fields and elements in Authentications frames).

This commit doesn't support FILS, FT, etc.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2023-06-07 20:53:50 +03:00
Andrei Otcheretianski
f540d078c9 AP: Support building Basic Multi-Link element
Define a struct to hold MLD station info and implement publishing of the
Basic Multi-Link element. Add it into Beacon and Probe Response frames.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2023-06-07 20:23:21 +03:00
Ilan Peer
79a9df6e88 AP: Match received Management frames against MLD address
Once a station is added to the underlying driver, the driver is expected
to do address translation and use MLD addresses. Thus, when handling a
received Management frame, match it against the MLD address.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2023-06-07 20:23:21 +03:00
Ilan Peer
a213fee11d AP: MLO: Make IEEE 802.1X SM, authserv, and RADIUS client singletons
To simplify the handling of MLD stations, assume that all
interfaces/BSSs use the same IEEE 802.1X authenticator, the same RADIUS
server instance, and the same RADIUS client.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2023-06-07 20:22:46 +03:00
Ilan Peer
2b541601da AP: Include an RNR element in Beacon frames for AP MLD
- Include RNR element in Beacon frames of AP MLDs.
- Whenever a new interface is added to an AP MLD, reconfigure
  the Beacon frame templates for all other interfaces, to allow
  updating their RNR elements.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2023-06-06 21:13:31 +03:00
Ilan Peer
e3605e8093 driver: Allow to provide a link ID when setting a channel
This includes:

- Modifications of the driver API, to include the link ID as part
  of 'struct hostapd_freq_params'.
- Modifications to nl80211 driver.
- Modifications for the driver wrappers.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2023-06-06 20:44:25 +03:00
Andrei Otcheretianski
be44a7afd5 driver: Add MLD link id to AP parameters
To be used in later patches, e.g., for link tracking etc.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2023-06-06 20:37:07 +03:00
Andrei Otcheretianski
7fa99b3246 AP: Allow starting multiple interfaces within single MLD
Add support for including multiple hostapd interfaces in the same AP
MLD, i.e., all using the same underlying driver network interface.

To do so, when a new hostapd interface is added, if there is already
another interface using the same underlying network interface, associate
the new interface with the same private data object, instead of creating
a new one.

As some of the BSSs are non-first BSSs, meaning that they reuse the
drv_priv of the initial BSS, make sure not to double free it.

Currently multiple BSS entries are not supported so always use bss[0]
for MLD.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2023-06-06 20:30:47 +03:00
Andrei Otcheretianski
f2dd75093f AP: Add some basic MLD configuration options
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2023-06-06 20:17:23 +03:00
Benjamin Berg
8dffa0ccb1 AP: MLO: Retrieve EML and MLD capabilities from driver
Add a new driver API get_mld_capab() and and use it to fetch MLD and EML
capabilities.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
2023-06-06 20:11:06 +03:00
Pooventhiran G
0837863fbc AP: Handle 6 GHz AP state machine with NO_IR flags
AP cannot come up in channels that are marked as NO_IR. If AP moves to
HAPD_IFACE_DISABLED state, it will deinitialize the nl80211 driver
interface and sockets.

Hence, introduce a new state called HAPD_IFACE_NO_IR, for 6 GHz APs to
handle NO_IR scenarios, such as AFC, where the channels not allowed by
AFC will have HOSTAPD_CHAN_NO_IR flag set. In this state, AP is still
kept in a non-operational state (stopped) without deinitializing the
nl80211 driver interface. wiphy reg change event can then update the
channels and bring up the AP in a valid channel.

Signed-off-by: Pooventhiran G <quic_pooventh@quicinc.com>
2023-06-05 11:18:39 +03:00
Sai Pratyusha Magam
4120f9d7ab PASN: Introduce configuration option to allow/deny PASN-UNAUTH
Per IEEE P802.11az/D7.0, 12.12.3.2 (PASN Frame Construction and
Processing), responder should REFUSE PASN authentication frame 1 with
Base AKM as PASN AKM if dot11NoAuthPASNActivated is false. That
configuration was not previously available and hostapd was hardcoded
with dot11NoAuthPASNActivated being true.

Allow this to be configured and reject PASN authentication frame 1 from
initiator if pasn_noauth=0 and Base AKM in RSNE of this frame is PASN.
The default value for pasn_noauth is 1 to maintain previous
functionality even though the dot11NoAuthPASNActivated is defined to
have default value of false.

Signed-off-by: Sai Pratyusha Magam <quic_smagam@quicinc.com>
2023-05-25 22:54:12 +03:00
Sathishkumar Muruganandam
a1601aaa66 WPS: Fix multi-ap fronthaul association
Setting 4addr mode on fronthaul BSS breaks WPS association on backhaul
STA which is still on 3addr mode.

Fix the interop issue by not setting 4addr mode on fronthaul BSS with
WPS instead of setting by default for multi-ap case.

Fronthaul BSS for non-WPS STA shall continue to use 4addr mode.

Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com>
2023-05-25 17:16:31 +03:00
Adil Saeed Musthafa
2885660318 Store pmk_r1_name derived with wpa_ft_local_derive_pmk_r1() properly
The parameter req_pmk_r1_name was not used at all in the function
wpa_ft_local_derive_pmk_r1(). In addition, the PMK-R1-NAME should be
updated in this function along with the PMK-R1. This means the parameter
should change from "req_pmk_r1_name" to "out_pmk_r1_name" to match the
design used for other paths that derive the PMK-R1.

sm->pmk_r1_name needs to be properly updated when pmk_r1_name is derived
from the local pmk_r0.

Signed-off-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
2023-05-25 17:11:59 +03:00
Adil Saeed Musthafa
e978072baa Do prune_association only after the STA is authorized
Prune-associations should be done only after the new station is
authorized. Otherwise any STA can cause denial of service to connected
stations in PMF case when more than a single interface is being
controlled by the same hostapd process.

Signed-off-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
2023-05-25 17:08:57 +03:00
Jouni Malinen
386d59e00d Do not disconnect EAPOL-Logoff before authentication
Some station devices are apparently sending the EAPOL-Logoff message in
some cases before the initial authentication for WPA2/WPA3-Enterprise.
hostapd would have forced a "post EAP-Failure" disconnection in 10 ms
for such cases while still allowing the EAP authentication to try to
complete.

This is not ideal and could result in interoperability issues, so skip
the forced disconnection in the particular case where the EAPOL-Logoff
message is received before the first authentication is completed.

In addition, disconnect the STA without starting new EAP authentication
and the 10 ms delay if an EAPOL-Logoff message is received after
authentication has been completed successfully. This results in cleaner
behavior by avoiding the extra start of a new EAP authentication in a
case where the STA is going to be disconnected shortly.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-05-04 11:10:16 +03:00
Jouni Malinen
5d285040d6 Rename VHT elements to match the standard
Some of the information elements added in IEEE Std 802.11ax-2013 for VHT
purposes have since then been taken into use for other cases and renamed
to remove the "VHT" prefix in the standard. Update the defines for those
elements in the implementation to match the names used in the current
standard.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-26 23:10:03 +03:00
Ramya Gnanasekar
8f8f68ba67 hostapd: Support channel switch to 320 MHz channels
Add validatation of center frequency, and filling of appropriate
bandwidth in the channel switch wrapper when the channel switch is done
to a 320 MHz channel.

Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
2023-04-26 23:10:03 +03:00
Jouni Malinen
4d0743d5e5 Fix file mode bits
The execute bits were not supposed to be added to a source code file.

Fixes: 927dbfb453 ("Fix 40 MHz channel bringup with ACS on the 6 GHz band")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-26 23:10:03 +03:00
Jouni Malinen
d930211bdd Select 6 GHz mode correctly for ACS cases
Use the op_class configuration to determine whether to select the 5 GHz
or 6 GHz mode for ACS. Without this, the first mode (5 GHz in most
cases) would have been selected regardless of the op_class value.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-25 17:29:46 +03:00
Hari Chandrakanthan
927dbfb453 Fix 40 MHz channel bringup with ACS on the 6 GHz band
When AP is brought up in HE40/EHT40 with ACS, the AP comes up with 20
MHz bandwidth. It is expected to come up with 40 MHz bandwidth.

conf->secondary_channel does not hold the correct value and it leads to
choosing 20 MHz in hostapd_set_freq_params(). conf->secondary_channel is
filled using the hostapd config he_oper_centr_freq_seg0_idx. When AP is
configured to use ACS, the hostapd config he_oper_centr_freq_seg0_idx is
not valid as the channel is not known during bring up. So using the
config he_oper_centr_freq_seg0_idx to fill the conf->secondary_channel
does not work with ACS.

Use op_class to determine the bandwidth and based on the bandwidth fill
the conf->secondary_channel to address this ACS case.

Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
2023-04-25 17:05:52 +03:00
Xinyue Ling
f54ce74335 Fix determining mode for 6 GHz band when using hw_mode=any
When 6 GHz band is specified and hw_mode parameter is set to any,
hostapd_determine_mode() may determine the wrong mode because there are
two hw modes (5 GHz and 6 GHz) with HOSTAPD_MODE_IEEE80211A. This will
cause 6 GHz AP to fail to start. Fix this by adding a check similar to
the changes in commit 99cd453720 ("hw_feature: Correctly select mode
in case of the 6 GHz band") into hostapd_determine_mode().

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-21 21:15:00 +03:00
Xin Deng
f8931fcbaf hostapd: Restore the flow of set beacon and WPA key init
hostapd start AP flow changed in commit 931e5d4f9e. However, that
could cause a regression in a legacy AP driver where the set key
operation for GTK, IGTK, and BIGTK before AP start (set beacon) would
cause the driver to ignore the key set command. Restore the flow of the
set beacon and WPA key init operations to make sure drivers can receive
and set group keys correctly.

Fixes: 931e5d4f9e ("mbssid: Configure all BSSes before beacon setup")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-04-19 11:47:52 +03:00
Veerendranath Jakkam
9932ff30c4 Allowed frequency list configuration for AP operation
Add support to configure the allowed frequency list for AP operation
using a QCA vendor interface before NL80211_CMD_NEW_BEACON/
NL80211_CMD_START_AP. hostapd generates the allowed frequency list by
intersecting user configured frequency list and all the frequencies
advertised by the driver including disabled channels. If user doesn't
specify allowed frequency list, all the frequencies advertised by the
driver, including disabled channels, will be configured.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
2023-04-19 11:32:07 +03:00
Aloka Dixit
5d06acefdd RNR: Add elements by default for EMA AP
As per IEEE Std 802.11ax-2021, 11.1.3.8.3 Discovery of
a nontransmitted BSSID profile, an EMA AP that transmits a Beacon
frame carrying a partial list of nontransmitted BSSID profiles
should include in the frame a Reduced Neighbor Report element
carrying information for at least the nontransmitted BSSIDs that
are not present in the Multiple BSSID element carried in that frame.

Add this support by splitting the reduced neighbor report (RNR) in as
many elements as the number of multiple BSSID elements. Each RNR element
excludes the non-transmitting profiles already included in the MBSSID
element at the same index. If present, the last additional group will
have the data common for all EMA beacons such as neighbor AP information
gathered through neighbor reports.

The hwsim test case he_ap_ema demonstrates this support.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2023-04-18 11:35:06 +03:00
Aloka Dixit
8f1d384197 RNR: Skip interfaces on the same radio for MBSSID
Do not include interfaces on the same radio in reduced neighbor
report elements (RNR) as multiple BSSID elements from the same
management frame already include these if MBSSID feature is enabled.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2023-04-18 11:14:07 +03:00
Jouni Malinen
0059fa5bae 6 GHz: Fix secondary channel setting
center_idx_to_bw_6ghz() does not return the bandwidth in MHz and as
such, the check here against 20 (MHz) is never true. The returned value
is greater than 0 for the over 20 MHz cases.

Fixes: 15742566fd ("6 GHz: Fix operating class in Supported Operating Classes element")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-03-29 18:25:37 +03:00
Aloka Dixit
a0403c0239 EHT: Validate the puncturing bitmap for ACS
Validate the generated puncturing bitmap against non-OFDMA patterns.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2023-03-17 19:49:57 +02:00
Aloka Dixit
af0f60e7dd EHT: Calculate puncturing bitmap for ACS
Generate puncturing bitmap after the ideal channel selection using
the threshold.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2023-03-17 19:49:57 +02:00
Aloka Dixit
f3206fbe94 EHT: Configuration option for ACS puncturing threshold
Add a new option 'punct_acs_threshold' where the value indicates
the percentage of ideal channel average interference factor above
which a channel should be punctured. Default is set to 0 which disables
the puncturing for ACS.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2023-03-17 19:49:57 +02:00
Aloka Dixit
e3621867c5 EHT: Process puncturing bitmap from channel switch event
Retrieve the puncturing bitmap sent by the driver in channel switch
events and add a new member punct_bitmap in struct ch_switch to store
it.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2023-03-17 19:49:57 +02:00
Aloka Dixit
29a882bed3 EHT: Configure puncturing bitmap during channel switch
Parse, validate, and configure puncturing bitmap if provided in the
channel switch command.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2023-03-17 19:49:54 +02:00
Aloka Dixit
4942b19fff EHT: Send puncturing bitmap to the driver for AP bring up
Send the user configured puncturing bitmap to the driver.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
2023-03-17 19:46:24 +02:00
Muna Sinada
f9fc2eabbd EHT: Add puncturing bitmap to EHT Operation element
Add preamble puncturing bitmap to the EHT Operation element as per IEEE
P802.11be/D3.0, Figure 9-1002c (EHT Operation Information field format).
Bits set to 1 indicate that the subchannel is punctured, otherwise
active.

Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com>
2023-03-17 19:46:24 +02:00
Aloka Dixit
46a5d989d4 EHT: Downgrade bandwidths for VHT and HE when using puncturing
Legacy modes (VHT, HE) should advertise downgraded bandwidth if
RU puncturing is enabled in EHT mode. This is required for the legacy
stations which cannot parse the EHT Operation elements hence do not
support EHT RU puncturing.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Ramanathan Choodamani <quic_rchoodam@quicinc.com>
2023-03-17 19:46:24 +02:00
Aloka Dixit
7618269ec6 EHT: Validate puncturing bitmap
Validate preamble puncturing bitmap.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2023-03-17 18:54:50 +02:00
Muna Sinada
9102fda31f EHT: Add configuration option for puncturing in AP mode
Add a new option to configure the disabled subchannel bitmap as per
IEEE P802.11be/D3.0, Figure 9-1002c (EHT Operation Information
field format).

Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2023-03-17 11:06:20 +02:00
Aloka Dixit
591256a8c6 FILS: 320 MHz support in FD frame
Indicate 320 MHz channel width in FILS discovery frame if applicable.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2023-03-14 11:27:43 +02:00
Aloka Dixit
903e3a1e62 FILS: Fix maximum NSS calculation for FD frame
Maximum NSS calculation assumed the host to be little endian while
retrieving MCS values from HE capabilities which is incorrect. Use
WPA_GET_LE16() instead.

Add a check for HE as the current NSS calculation assumes HE support.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2023-03-14 11:27:00 +02:00
Aloka Dixit
ecae45ff66 FILS: Make HE a requirement for FILS discovery
FILS discovery frame generation currently assumes HE support for
calculating the number of spatial streams. Add a check to reject
the configuration if the feature is enabled without enabling HE.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2023-03-14 11:15:06 +02:00
Pooventhiran G
4e86692ff1 AP: Fix 6 GHz AP setup after disable-enable
Once ACS picks a channel, iface->freq and iface->conf->channel are
updated. So, AP comes up in the last operating channel when 'ENABLED'
after 'DISABLED' though ACS is configured.

But this will fail for 6 GHz APs since configured_fixed_chan_to_freq()
checks if iface->conf->channel is filled or not irrespective of ACS
configuration, and the checks inside configured_fixed_chan_to_freq()
fail the AP setup. Fix this by clearing iface->freq and
iface->conf->channel in AP setup for ACS configuration.

Fixes: bb781c763f ("AP: Populate iface->freq before starting AP")
Signed-off-by: Pooventhiran G <quic_pooventh@quicinc.com>
2023-03-09 21:00:43 +02:00
Ilan Peer
c4cb62ca8e WPA_AUTH: MLO: Add functions to get the AA and SPA
As a preparation to use AP MLD address and non-AP MLD address
in the RSN Authenticator state machine, add utility functions to
get the current AA and SPA.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2023-03-07 23:54:50 +02:00
Ilan Peer
cab963e9f8 AP: Split check_assoc_ies()
As a preparation for processing an association request with
ML element, split the function such that the elements checking
would be separate from parsing.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2023-03-07 23:46:18 +02:00
Andrei Otcheretianski
df6561ec06 nl80211: AP MLD support for adding multi link stations
Multi link stations are represented in the kernel using a single
station with multiple links and the first ADD_STA command also
creates the first link. Subsequent links should be added with
LINK_ADD commands.

Implement this logic and provide the required MLD information per
station/link.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2023-03-07 21:43:41 +02:00
Anthony Refuerzo
eb146ee804 AP: Add some bridge port attribute settings
"multicast_to_unicast" and "hairpin_mode" are usually set outside of
hostapd. However, DFS channel change events pull the BSS out of the
bridge causing these attributes to be lost. Make these settings tunable
within hostapd so they are retained after the BSS is brought up again.

Signed-off-by: Anthony Refuerzo <anthony96922@gmail.com>
2023-03-01 10:50:07 +02:00
Emeel Hakim
6d24673ab8 mka: Allow configuration of MACsec hardware offload
Add new configuration parameter macsec_offload to allow user to set up
MACsec hardware offload feature.

Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
2023-02-21 19:26:47 +02:00
Antonio Prcela
3081a9cb62 hostapd: Output country_code and country3 when using STATUS
Add the country_code and country3 config parameter to the STATUS output
to easier determine the current values for each of an hostapd
access point. Currently neither STATUS, GET [country_code/country3] nor
GET_CONFIG output it.

This is useful if the hostapd access point has been created with
wpa_ctrl_request() without using a *.conf file (like hostapd.conf).

Signed-off-by: Antonio Prcela <antonio.prcela@gmail.com>
Signed-off-by: Antonio Prcela <antonio.prcela@sartura.hr>
2023-02-21 17:33:03 +02:00
Jouni Malinen
242c3ad990 FT: Store PTKSA from FT protocol
PTKSA was stored for the 4-way handshake and FILS cases, but not when it
was being derived through the use of the FT protocol.

Fixes: f2f8e4f458 ("Add PTKSA cache to hostapd")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-02-21 17:21:52 +02:00
Jouni Malinen
ba6954874e Mark wpa_auth_remove_ptksa() static
This function is not used outside wpa_auth.c and it is not mentioned in
any header file either, so it should have been marked static.

Fixes: f2f8e4f458 ("Add PTKSA cache to hostapd")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-02-21 17:21:52 +02:00
Shiva Sankar Gajula
3b1ad1334a FT: Include KDK in FT specific PTK derivation on the AP
FT AP was silently ignoring EAPOL-Key msg 2/4 due to Key MIC mismatch
when the STA advertises support for Secure LTF and derives the KDK while
the AP implementation did not derive KDK.

Fix this to include KDK while deriving PTK for FT cases on the AP.

Signed-off-by: Shiva Sankar Gajula <quic_sgajula@quicinc.com>
2023-02-21 16:54:10 +02:00
Yi-Chia Hsieh
faa4102926 WNM: Event report handling for BSS color collision and in-use
Add support for WNM event report handling for the BSS color collision
and in use events.

Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
2023-02-20 22:00:13 +02:00
Antonio Prcela
ec02a0e936 hostapd: Output hw_mode when using STATUS
Adding the hw_mode config parameter to the STATUS output to easier
determine the current hw_mode of an hostapd access-point. Currently
neither STATUS, GET hw_mode, nor GET_CONFIG output it.

Useful if the hostapd access point has been created with
wpa_ctrl_request() without using a *.conf file, like hostapd.conf.

Signed-off-by: Antonio Prcela <antonio.prcela@gmail.com>
Signed-off-by: Antonio Prcela <antonio.prcela@sartura.hr>
2023-02-20 19:38:02 +02:00
Hari Chandrakanthan
6c75f1dfaf Send broadcast Probe Response frames on the 6 GHz band
Change Probe Response frames to be sent as broadcast for 6 GHz band per
IEEE Std 802.11ax‐2021, 26.17.2.3.2: "If a 6 GHz AP receives a Probe
Request frame and responds with a Probe Response frame (per 11.1.4.3.4),
the Address 1 field of the Probe Response frame shall be set to the
broadcast address, unless the AP is not indicating its actual SSID in
the SSID element of its Beacon frames."

Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
2023-02-17 16:05:37 +02:00
Jouni Malinen
ba150059d1 FT: Store PMK-R0/PMK-R1 after EAPOL-Key msg 2/4 MIC validation
hostapd was previously storing the derived PMK-R0 and PMK-R1 as soon as
these keys were derived. While that is fine for most purposes, it is
unnecessary to do that so quickly and if anything were to fail before
the supplicant is able to return a valid EAPOL-Key msg 2/4, there would
not really be any real use for the derived keys.

For the special case of FT-PSK and VLAN determination based on the
wpa_psk file, the VLAN information is set in the per-STA data structures
only after the EAPOL-Key msg 2/4 MIC has been verified. This ended up
storing the PMK-R0/PMK-R1 entries without correct VLAN assignment and as
such, any use of the FT protocol would not be able to transfer the VLAN
information through RRB.

Split local storing of the FT key hierarchy for the cases using the FT
4-way handshake so that PMK-R0 and PMK-R1 are first derived and then
stored as a separate step after having verified the MIC in the EAPOL-Key
msg 2/4 (i.e., after having confirmed the per-STA passphrase/PSK was
selected) and VLAN update. This fixes VLAN information for the
wpa_psk_file cases with FT-PSK.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-02-14 11:47:25 +02:00
Jouni Malinen
72b8193f41 MACsec: Remove EAP Session-Id length constraint
The initial MACsec implementation required the EAP Session-Id to be at
least 65 octets long and by truncating the value to that length, the
practical limit of functional cases was limited to that exact length of
65 octets. While that happens to work with EAP method that use TLS, it
does not work with most other EAP methods.

Remove the EAP Session-Id length constraint and allow any length of the
Session-Id as long as the EAP method provides one. In addition, simplify
this be removing the unnecessary copying of the Session Id into a new
allocated buffer.

Fixes: dd10abccc8 ("MACsec: wpa_supplicant integration")
Fixes: a93b369c17 ("macsec: Support IEEE 802.1X(EAP)/PSK MACsec Key Agreement in hostapd")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-02-10 12:31:01 +02:00
Shivani Baranwal
2e47ea22cc P2P: Fix handling Service Discovery Response received by GO device
The received Service Discovery Response frame follows the ap_mgmt_rx()
path in P2P GO mode. If gas_query_rx_frame() doesn't process the frame,
call the Public Action frame callbacks if any are registered for further
processing of the RX frame.

Fixes: 9c2b8204e6 ("DPP: Integration for hostapd")
Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com>
2023-01-25 23:47:33 +02:00
Michal Kazior
d9d5e55c54 DPP: Respond to GAS on the same channel it was received on
When I was testing dpp_auth_init on an AP with Enrollee on a different
channel from the AP I was getting failures. This happened on hwsim in
UML with time-travel for me. I don't recall seeing this with real
devices, presumably because of lax offchan implementation.

The DPP authentication would succeed. However the station would then try
to get configuration through a GAS request and fail.

The AP reported the following logs (grepped):

> 1614762426.860212: RX_ACTION category 4 action 10 sa 02:00:00:00:01:00 da 02:00:00:00:00:00 len 227 freq 2412
> 1614762426.860212: wlan0: GAS: GAS Initial Request from 02:00:00:00:01:00 (dialog token 239)
> 1614762426.860233: DPP: Wait for Configuration Result
> 1614762426.860234: nl80211: Send Action frame (ifindex=5, freq=2462 MHz wait=0 ms no_cck=0 offchanok=0)
> 1614762428.861186: DPP: Timeout while waiting for Configuration Result
> 1614762428.861186: wlan0: DPP-CONF-FAILED

While the STA reported the following logs (grepped):

> 1614762426.860193: wlan1: DPP-AUTH-SUCCESS init=0
> 1614762426.860195: DPP: Stop listen on 2412 MHz
> 1614762426.860202: wlan1: GAS-QUERY-START addr=02:00:00:00:00:00 dialog_token=239 freq=2412
> 1614762428.861185: GAS: No response received for query to 02:00:00:00:00:00 dialog token 239
> 1614762428.861189: DPP: GAS query did not succeed
> 1614762428.861189: wlan1: DPP-CONF-FAILED

AP would still receive the GAS request on ch1 but would then try to
respond on ch11 while STA was waiting on ch1.

Signed-off-by: Michal Kazior <michal@plume.com>
2022-12-18 21:07:56 +02:00
Jouni Malinen
3a2d275522 Make MFPR value from an associated STA available as hostapdMFPR
This can be helpful for testing purposes.

Signed-off-by: Jouni Malinen <j@w1.fi>
2022-12-18 21:07:56 +02:00
Jouni Malinen
f4096e7cd5 EHT: Update EHT Operation element to P802.11be/D2.3 in AP settings
IEEE P802.11be/D2.0 added a 4-octet Basic EHT-MCS And Nss Set field into
the EHT Operation element. cfg80211 is now verifying that the EHT
Operation element has large enough payload and that check is failing
with the previous version. This commit does not really set the correct
Basic EHT-MCS And Nss Set values, but the IE length check is now passing
to allow initial mac80211_hwsim testing to succeed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2022-12-17 20:32:15 +02:00
Andrei Otcheretianski
694a1c6873 SAE: Make sme_sae_auth() return IE offset
Authentication frames include several fixed body parts (see Table 9-68
(Authentication frame body) and Table 9-69 (Presence of fields and
elements in Authentication frames) in IEEE P802.11-REVme/D2.0).

To be able to parse the IE part, these fields need to be skipped. Since
SAE logic already implements this parsing, change SAE authentication
handling functions to return the offset to the IE part. This preparation
is needed for future MLD patches that need to parse out the ML related
elements in the Authentication frames.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2022-12-17 17:11:16 +02:00
Andrei Otcheretianski
3d798ff2a4 PASN: Align RSNXE with IEEE P802.11az/D7.0 definitions
RSNXE bits were modified, so update the relevant places accordingly.
Please note, WLAN_RSNX_CAPAB_PROT_RANGE_NEG was renamed to
WLAN_RSNX_CAPAB_URNM_MFPR and the bit position is changed to 15 instead
of 10, while BIT 10 is used for WLAN_RSNX_CAPAB_URNM_MFPR_X20 and is not
supported yet.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2022-12-16 22:35:19 +02:00
Johannes Berg
054fcfab6f hostapd: Add require_he configuration
Add the ability to require HE, advertising that via the
BSS membership selector as well as rejecting association
without HE.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2022-12-16 20:31:14 +02:00
Qiwei Cai
c46351d10e DFS: Clear cac_started when AP is disabled
When AP is started on a DFS channel and DFS is offloaded to the driver,
AP setup will be separated to two stages. In the first stage, hostapd
will set frequency and initialize BSS, then waits the driver CAC to
complete. Once CAC done, in the second stage,
hostapd_setup_interface_complete() will be called again from a callback
to continue AP/channel setup.

But the driver will fail to restart AP if it is disabled/reenabled
during a driver CAC procedure because some steps such as setting
freq/beacon in the first stage are skipped due to cac_started not
cleared when the AP is disabled.

Avoid this by clearing cac_started when the AP is disabled.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-12-15 18:43:43 +02:00
Aloka Dixit
3df42cf3c7 EHT: Use HE operating channel width in MCS length calculation
Channel width in HE Capabilities element added to management frames is
calculated in hostapd_eid_he_capab() by intersecting the driver
capabilities and the operating channel width. Kernel uses this value
from the Beacon frames to verify EHT capabilities length. However, EHT
MCS length calculation uses only the driver capabilities which results
in EHT AP bring up failure in some cases dues to different lengths.

Modify the EHT code to use the HE operating channel width as well to
determine matching length for the information.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2022-12-15 18:41:31 +02:00
David Ruth
ad4fa5dd3c Add more nl80211 info to struct wpa_signal_info
Facilitate emitting more station information over D-Bus for use by the
connection manager.

* Add storage for more NL80211_STA_INFO_* fields to data structures, and
  move them through the system.
* Reorder NL80211_STA_INFO_* fields in driver_nl80211.c to match the
  ordering in nl80211.h.
* Convert signal field to an integer to support holding WPA_INVALID_NOISE
  and avoid changing logging.

* Add fields to hostap_sta_driver_data to capture more information
	* fcs_error_count
	* beacon_loss_count
	* expected_throughput
	* rx_drop_misc
	* rx_mpdus
	* rx_hemcs
	* tx_hemcs
	* rx_he_nss
	* tx_he_nss
	* avg_signal
	* avg_beacon_signal
	* avg_ack_signal
* Add struct hostap_sta_driver_data to struct wpa_signal_info and remove
  redundant fields and redundant attribute parsing
	* Change logging when printing txrate to handle unsigned long
	  value

Signed-off-by: David Ruth <druth@chromium.org>
2022-12-03 10:42:16 +02:00
Jouni Malinen
090f0f8c70 mbssid: Indicate MBSSID information in RNR
Indicate whether the collocated BSS in the RNR is a part of a multiple
BSSID set and whether it is a transmited BSSID.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-12-02 23:06:32 +02:00
Aloka Dixit
54b1352efd mbssid: Make the AID space shared
As described in IEEE Std 802.11-2020, 11.1.3.8 Multiple BSSID procedure,
set the lowest AID value assigned to any client equal to 2^n, where n is
the maximum BSSID indicator of the MBSSID set.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
2022-12-02 20:47:49 +02:00
Aloka Dixit
10749c3c48 mbssid: Process Known BSSID element
Process the Known BSSID elements if included by non-AP stations. The
format is described in IEEE Std 802.11ax-2021, 9.4.2.261.

Non-AP stations may include this element in directed Probe Request
frames to indicate which of the multiple BSSIDs they have already
discovered. AP should exclude these profiles from the Probe Response
frame.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2022-12-02 20:45:05 +02:00
Aloka Dixit
15690faada mbssid: Add MBSSID Configuration element
Add Multiple BSSID Configuration element data per IEEE Std
802.11ax-2021, 9.4.2.260 when enhanced multiple BSSID advertisement
(EMA) is enabled. This element informs the stations about the EMA
profile periodicity of the multiple BSSID set.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2022-12-02 20:37:33 +02:00
Aloka Dixit
fc2e4bac5a mbssid: Set extended capabilities
Set extended capabilities as described in IEEE Std 802.11ax-2021,
9.4.2.26. Reset the capability bits to 0 explicitly if MBSSID and/or EMA
is not enabled because otherwise some client devices fail to associate.

Bit 80 (complete list of non-tx profiles) is set for all Probe Response
frames, but for Beacon frames it is set only if EMA is disabled or if
EMA profile periodicity is 1.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
2022-12-02 20:21:11 +02:00
Aloka Dixit
a004bf2cd0 mbssid: Configure parameters and element data
Add helper functions to retrieve the context for the transmitting
interfaces of the MBSSID set and the index of a given BSS.

Set device parameters: BSS index and the transmitting BSS.

Include Multiple BSSID elements in Beacon and Probe Response frames.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
2022-12-02 19:53:15 +02:00
Aloka Dixit
c5a09b051a mbssid: Add Non-Inheritance element
Add data per IEEE Std 802.11-2020, 9.4.2.240. Current implementation is
added for the security and extended supported rates only.

For the Extended rates element, add a new member 'xrates_supported'
which is set to 1 only if hostapd_eid_ext_supp_rates() returns success.
Without this change, there are cases where this function returns before
adding the element for the transmitting interface resulting in incorrect
addition of this element inside the MBSSID Non-Inheritance element.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Co-developed-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
2022-12-02 19:40:49 +02:00
Aloka Dixit
920b56322d mbssid: Functions for building Multiple BSSID elements
Add Multiple BSSID element data per IEEE Std 802.11ax-2021, 9.4.2.45.
Split the BSSes into multiple elements if the data does not fit in
the 255 bytes allowed for a single element.

Store the total count of elements created and the offset to the start
of each element in the provided buffer.

Set the DTIM periods of non-transmitted profiles equal to the EMA
profile periodicity if those are not a multiple of the latter already as
recommended in IEEE Std 802.11ax-2021, Annex AA (Multiple BSSID
configuration examples).

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
2022-12-02 19:25:40 +02:00
Aloka Dixit
931e5d4f9e mbssid: Configure all BSSes before beacon setup
When multiple BSSID advertisement feature is enabled in IEEE 802.11ax
mode or later, Beacon frames are not transmitted per interface, instead
only one of the interfaces transmits Beacon frames that include one or
more Multiple BSSID elements with configuration for the remaining
interfaces on the same radio.

Change the existing logic such that all configuration details for all
the interfaces are available while building the Beacon frame template
for the transmitting interface itself.

Do not change the flow for the cases where multiple BSSID advertisement
is not enabled.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2022-12-02 19:05:11 +02:00
Aloka Dixit
78d0b98995 mbssid: Retrieve driver capabilities
Retrieve driver capabilities for the maximum number of interfaces for
MBSSID and the maximum allowed profile periodicity for enhanced MBSSID
advertisement.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
2022-12-02 16:43:59 +02:00
Aloka Dixit
7452e54477 mbssid: Add new configuration option
Add configuration option 'mbssid' used to enable multiple BSSID (MBSSID)
and enhanced multiple BSSID advertisements (EMA) features.

Reject the configuration if any of the BSSes have hidden SSID enabled.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
2022-12-02 16:36:19 +02:00
Daniel Gabay
bb67d5b52b AP: Add testing option to delay EAPOL Tx
Add a testing option to delay EAPOL-Key messages 1/4 and 3/4. By setting
delay_eapol_tx=1, the actual EAPOL Tx will occur on the last possible
attempt (wpa_pairwise_update_count) thus all previous attempts will fail
on timeout which is the wanted delay.

In addition, add an hwsim test that uses this testing option to verify
that non protected Robust Action frames are dropped prior to keys
installation in MFP.

Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2022-12-02 13:07:03 +02:00
Jouni Malinen
1a800a9400 EAP-TEAP server: Allow tunneled EAP method sequence to be optimized
Include the start of the next EAP method in an EAP Payload TLV in the
same message with the Crypto-Binding TLV for the previous EAP method to
get rid of one roundtrip when using more than a single EAP
authentication method within the tunnel. The previous, not optimized,
sequence can still be used with eap_teap_method_sequence=1 for more
complete testing coverage.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-12-01 17:53:05 +02:00
Jouni Malinen
bbd5a4689b SAE: Add an enum for defining sae_pwe parameter values
Make this more readable by replacing magic numbers with enum values.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-11-29 20:37:23 +02:00
Nicolas Escande
20bfd4feb3 AP: Enable H2E on 6 GHz when SAE is used
Even if the use of H2E isn't strictly mandatory when using SAE on 6 GHz,
WPA3-Personal pushes it on 6 GHz. So lets automatically enable it by
setting sae_pwe=2. This will allow both the hunting-and-pecking and
hash-to-element to work (and be backward compatible).

Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
2022-11-29 18:56:47 +02:00
Michal Kazior
043dedee83 DPP: Expose enrollee pubkey hash for identification
Just like with WPA-PSK and keyids it may be desired to identify
connecting clients to provide additional network filtering.

This does:

 - extend DPP_EVENT_AUTH_SUCCESS to expose public
   key hash of the peer so the system can pick it
   up and use for identification later

 - store public key hash in PMKSA from DPP Network
   Intro for later use

 - extend sta mib to print out the dpp_pkhash
   from PMKSA if present

 - extend AP_STA_CONNECTED to include the
   dpp_pkhash from PMKSA if present

Signed-off-by: Michal Kazior <michal@plume.com>
2022-11-29 13:55:53 +02:00
Michal Kazior
2d8974e314 DPP: Move DPP_EVENT_AUTH_SUCCESS to a helper
This event is generated in a couple of places. It'll be easier to extend
the event with additional metadata if it's generated in a single place.

Signed-off-by: Michal Kazior <michal@plume.com>
2022-11-29 13:55:36 +02:00
Nicolas Escande
4cb23b66d6 ACS: Allow selecting a better channel when using 40/80/160 MHz
When considering a channel for a bandwidth of 40/80/160 MHZ on the 5 GHz
or 6 GHz band, allow selecting one of the other channels in the segment
instead of the first one. This is done only if the other channel's
interference_factor is lower than the first one's.

Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
2022-11-28 23:31:33 +02:00
Nicolas Escande
472101684b ACS: introduce acs_adjust_secondary
When using 40/80/160 MHz bandwidth on the 5 GHz or 6 GHz band, enforce
the secondary channel to be the other channel of the corresponding 40
MHz segment.

Even if this is useless for now, this is preparatory work to allow ACS
to select a primary channel which is not the first of its segment.

Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
2022-11-28 23:23:13 +02:00
Nicolas Escande
60e2934cbf ACS: Introduce acs_get_bw_center_chan()
When using 40/80/160 MHz bandwidth, instead of computing the index of
the segment center freq based on the selected channel, lets look it up
in the bw_desc[] table.

This is preparative work to allow selecting a primary channel which is
not the first of the segment.

Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
2022-11-28 23:22:35 +02:00
Nicolas Escande
ed8e13decc ACS: Extract bw40/80/160 freqs out of acs_usable_bwXXX_chan()
This extracts the 3 lists of allowed channels for 40/80/160 MHz
bandwidth out of their respective functions. It also adds for each
segment the frequency of the segment's last channel and the index of the
segment's "center" channel.

This is preparative work to allow selecting a channel which is not the
first of its segment for 40/80/160 MHz. In addition, this adds the 5 GHz
160 MHz channel defined for 5735-5895 MHz (channels 149-177).

Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
2022-11-28 23:22:30 +02:00
Raphaël Mélotte
af1528a128 hostapd: Add RELOAD_BSS
When using multiple BSSes on a single radio, it is sometimes desirable
to reconfigure one BSS, without disconnecting the stations already
connected to other BSSes on the same radio.

When a BSS is reconfigured using the SET command, there is no "old"
configuration we can compare to (so we cannot compare a hash of the
configuration for example).

One possible solution would be to make the current RELOAD command
reload only the current BSS. However, that could break the workflow of
existing users. Instead, introduce a new RELOAD_BSS command, which
reloads only the current BSS.

Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
2022-11-27 15:49:48 +02:00
Raphaël Mélotte
b37c3fbad4 hostapd: Add config_id parameter
Add a new configuration parameter: config_id.

If set, only do hostapd_clear_old() for the BSSes for which the
config_id changed.

This makes it possible to reconfigure specific BSSes on a radio,
without disconnecting clients connected to other, unchanged BSSes of
the same radio.

This patch adapted from a patch authored by John Crispin in the
OpenWrt repository:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=package/network/services/hostapd/patches/700-wifi-reload.patch;h=c5ba631a0fc02f70714cb081b42fcf6cb9694450;hb=60fb4c92b6b0d1582d31e02167b90b424185f3a2

Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
2022-11-27 15:41:19 +02:00
Raphaël Mélotte
46f6a32775 Split BSS-specific hostapd_clear_old_bss() from hostapd_clear_old()
In hostapd_clear_old() multiple steps are needed to clear a BSS.
There are some places where it would be desirable to clear only some
BSSes and not all.

To make it easier to clear only some BSSes, split hostapd_clear_old()
with hostapd_clear_old_bss(), which does the same actions but on a
single BSS.

Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
2022-11-27 15:35:26 +02:00
Jouni Malinen
1d42dafce6 RSN: Do not include RC4 use in FIPS builds
CONFIG_NO_RC4=y could have been used to remove this functionality, but
it might as well be done automatically based on CONFIG_FIPS=y as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2022-11-26 11:34:30 +02:00
Mert Ekren
c823197bde SAE: Use Challenge Failure status code in confirm message failure cases
IEEE Std 802.11-2020, 12.4.7.6 says that status code CHALLENGE_FAILURE,
needs to be sent in case the verification action fails for SAE Confirm
message frame from a STA: "An SAE Confirm message, with a status code
not equal to SUCCESS, shall indicate that a peer rejects a previously
sent SAE Confirm message. An SAE Confirm message that was not
successfully verified is indicated with a status code of
CHALLENGE_FAILURE."

hostapd, however, did not use this status code for this case. In
ieee802_11.c the function sae_check_confirm() is called and in case of
verification failure (-1 is returned), the response is set to
WLAN_STATUS_UNSPECIFIED_FAILURE (status code = 1). Fix this to use
CHALLENGE_FAILURE.

Signed-off-by: Koen Van Oost <koen.vanoost@airties.com>
Signed-off-by: Mert Ekren <mert.ekren@airties.com>
2022-11-24 12:09:38 +02:00
Jouni Malinen
e91ac53d53 DFS: Do not allow channel checks to go beyond the channel list
Explicitly check for invalid cases where the configured channel and
bandwidth might result in the full channel number range going beyond the
list of supported channels to avoid reading beyond the end of the
channel buffer.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-11-23 22:51:50 +02:00
Qiwei Cai
b6c38cee93 Skip CAC if the driver switches channel to non-DFS
If an AP is started on a DFS channel (or any channels within its
bandwidth require DFS) and DFS is offloaded to the driver, hostapd needs
to wait for CAC to complete. But the driver may not do CAC and just
switches to a non-DFS channel instead. This would result in a failure to
start the AP because hostapd fails to receive a CAC complete event and
cannot finish interface setup.

Skip CAC and complete AP setup in the channel switch event handler for
this case.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-11-23 18:32:46 +02:00
Jouni Malinen
34d93b0c9d HS 2.0: Deauthenticate STA on deauth-imminent more quickly if no URL
When the RADIUS server requests a STA to be deauthenticated imminently
without providing a reason URL, there is no need to allow the STA spend
any additional time associated. Deauthenticate the STA immediately after
it has ACK'ed the WNM-Notification frame indicating imminent
deauthentication or at latest two seconds after having processes the
Access-Accept message.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-11-21 22:57:38 +02:00
Jouni Malinen
40a42613e6 FT: Simplify FTE parsing for FT-SAE-EXT-KEY using MIC Length subfield
Commit 25b52e5f83 ("FT: Extend FTE parsing for FT-SAE-EXT-KEY") used
possible MIC length iteration to try to figure out the length of the MIC
field in FTE. That was the only option available at the time, but FTE is
now being extended in IEEE 802.11-REVme to explicitly indicate the
length of the MIC field for the new FT-SAE-EXT-KEY AKM to make this
easier.

Use the new design from the approved comment resolution (*) in
REVme/D2.0 ballot CID 3135 to simplify implementation. This gets rid of
the need to pass in key length and the somewhat strange need_{r0kh,r1kh}
parameters to wpa_ft_parse_ies().

(*)
https://mentor.ieee.org/802.11/dcn/22/11-22-1991-02-000m-proposed-resolutions-to-some-lb270-comments.docx

Signed-off-by: Jouni Malinen <j@w1.fi>
2022-11-20 11:43:53 +02:00
Vinay Gannevaram
309765eb66 PASN: Use separate variables for BSSID and peer address
Using separate variables for BSSID and peer address is needed to support
Wi-Fi Aware (NAN) use cases where the group address is used as the BSSID
and that could be different from any other peer address. The
infrastructure BSS cases will continue to use the AP's BSSID as both the
peer address and BSSID for the PASN exchanges.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-11-10 21:12:50 +02:00
Veerendranath Jakkam
08512e5f35 MLD STA: Extend key configuration functions to support Link ID
Add support to specify a Link ID for set key operation for MLO
connection. This does not change the existing uses and only provides the
mechanism for extension in following commits.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
2022-11-06 23:36:49 +02:00