The last update of the wireless-regdb database to the wireless-regdb.git
version of 2023-02-13 in commit c4034a69fe ("tests: Update regulatory
database to VMs") forgot to update regulatory.db.p7s. Update it as well.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This adds more production-like testing coverage for KDK derivation. Both
SAE and OWE transition mode are covered. The latter has some corner
cases that did not work correctly previously.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
At least some of the previous versions have expired, so need to re-sign
these to avoid EAP test case failures. This contains updates from
running tests/hwsim/auth_server/update.sh.
Signed-off-by: Jouni Malinen <j@w1.fi>
In theory, each device that supports WMM (or the IEEE 802.11 QoS for
that matter) is expected to advertise how many replay counters it
supports and the peer device is supposed to use that information to
restrict the total number of different MSDU priorities (AC/UP) that
might be used. In practice, this is not really done in deployed devices
and instead, it is just assumed that everyone supports the eight
different replay counters so that there is no need to restrict which
MSDU priorities can be used.
hostapd implementation of WMM has advertised support for 16 PTKSA replay
counters from the beginning while wpa_supplicant has not had any code
for setting the supported replay counter fields in RSNE, i.e., has left
the value to 0 which implies that only a single replay counter is
supported. While this does not really result in any real issues with
deployed devices, this is not really correct behavior based on the
current IEEE 802.11 standard and the WMM specification.
Update wpa_supplicant to use similar design to the hostapd RSNE
generation by setting the number of supported PTKSA replay counters to
16 whenever WMM is enabled. For now, this is done based on the
association being for HT/VHT/HE/EHT and also based on the AP supporting
WMM since it is much more likely for the local device to support WMM and
eight replay counters (which can be indicated only with the value that
implies support for 16 counters since there is no separate value for 8).
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
When an in interface is added dynamically to hostapd with
HWSimRadio, it's not removed during device reset.
This requires to manually remove it, otherwise subsequent tests may
fail. Better do it during device reset.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
It was apparently possible for the test script to fetch the
PTKSA_CACHE_LIST information from hostapd before the PASN message 3 had
been processed since only the event from wpa_supplicant related to
sending of that frame was explicitly waited for. Add a small wait to try
to avoid this race condition with UML time-travel.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Some of the test cases can use dpp-ca.py symlink to sigma-dut.git. That
symlink is not in the repository, so ignore it explicitly in git status.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Make sure hostapd has had time to complete 4-way handshake processing
before initiating reauthentication from wpa_supplicant. There is a small
window for race condition here when testing with UML and time travel.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This is a regression test for a NULL pointer dereferencing from commit
d8d2b3a338 ("Implement read-only mode for SSIDs from the additional
config (-I)") .
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This is needed to avoid failures caused by previous test cases having
left behind constraints on the allowed groups.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add a new P2P Service Discovery test to verify the handling of the
SD response frame received by the GO device.
Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com>
pyrad's tools.py EncodeOctets() uses a design that tries to
automatically determine when the octetstring is a hex string based on
the binary data starting with "0x". That is not really nice since it
will result in failing one out of 65536 possible random inputs with
"binascii.Error: Non-hexadecimal digit found" when trying to decode an
actual (non-hex) binary string as a hexstring.
Work around this by convering the special cases where the
Message-Authenticator binary value happens to start with b"0x" to a
hexstring.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This makes the test case a bit more likely to be able to complete with
S1G being enabled in mac80211_hwsim. However, the 15 second P2P protocol
timeout itself can be hit in this type of a case and the test case will
still fail every now and then if all mac80211_hwsim supported channels
are included.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This test case could have failed when executed after a test case that
had forced a specific set of SAE groups.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
curses prints were causing parallel-vm.py to terminate if there were too
many VMs to fit into the screen. For now, simply hide any VMs from the
live status if there is not sufficient room for them.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
One of the PBC APs was left running at the end of the tet case with
active PBC. Stop that AP as well before flushing scan information on the
STA.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
If mac80211_hwsim has S1G channels enabled, the 15 second timeout was
not sufficiently long for full scan while connected.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
If mac80211_hwsim has S1G channels enabled, the 15 second timeout was
not sufficiently long for full scan while connected.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
If mac80211_hwsim has S1G channels enabled, the 15 second timeout was
not long enough to allow two scan iterations to be completed.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
gas_failures was using an invalid preassoc_mac_addr value 1111 to
trigger a failure. That won't work once wpa_supplicant starts validating
the range of the configuration parameter. Use a different mechanism to
force a failure in the actual random MAC address change functionality.
Signed-off-by: Jouni Malinen <j@w1.fi>
sta_dynamic_random_mac_addr and sta_dynamic_random_mac_addr_keep_oui
assumed that the same random MAC address remains in use even though it
set the lifetime to 0 seconds. This might have worked in the past by
accident, but set this properly to configure a longer lifetime.
Signed-off-by: Jouni Malinen <j@w1.fi>
Extend the SAE-EXT-KEY testing to also cover GCMP-256.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Add test cases for MBSSID functionality with EMA.
Add helper functions to create the configuration file, start hostapd
instance and client association with the transmitting interface.
he_ap_mbssid_open: 4 VAPs with open security in multiple BSSID
configuration. The first interface transmits beacons and probe responses
which include the multiple BSSID element(s) with remaining profiles.
he_ap_mbssid_same_security: 2 VAPs, all with SAE. In such a case the
Multiple BSSID elements in management frames do not include RSN and RSNE
elements as all non-transmitting profiles have exact same security
configuration as the transmitting interface.
he_ap_mbssid_mixed_security{1,2}: 8 VAPs with mixed security
configurations (SAE, OWE, WPA2-PSK, open). he_ap_mbssid_mixed_security1:
Transmitting interface uses SAE. In this case the non-transmitting
profiles will include non inheritance element (IEEE Std 802.11-2020,
9.4.2.240) wherever the security differs from the transmitting profile.
he_ap_mbssid_mixed_security2: Transmitting profile is open hence no need
for the non inheritance elements. Instead each non-transmitting profile
includes RSN, RSNE if applicable.
he_ap_ema: Enhanced multi-BSS advertisements (EMA) with 8 VAPs all with
SAE configuration.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Add a testing option to delay EAPOL-Key messages 1/4 and 3/4. By setting
delay_eapol_tx=1, the actual EAPOL Tx will occur on the last possible
attempt (wpa_pairwise_update_count) thus all previous attempts will fail
on timeout which is the wanted delay.
In addition, add an hwsim test that uses this testing option to verify
that non protected Robust Action frames are dropped prior to keys
installation in MFP.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
