Commit graph

4653 commits

Author SHA1 Message Date
Jouni Malinen
13e1d2e292 Indicate if PMF was negotiated for the connection
Add pmf=1/2 to wpa_supplicant STATUS command output to indicate that PMF
was negotiated for the connect (1 = optional in this BSS, 2 = required
in this BSS).

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-24 22:45:17 +02:00
Jouni Malinen
3c8e4ec012 Interworking: Enable key_mgmt WPA-EAP-SHA256 if PMF is enabled
If the global pmf=1/2 parameter is used to enable PMF for Interworking
networks, add WPA-EAP-SHA256 to the temporary network block to allow
connection to PMF required APs.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-24 22:31:17 +02:00
Jouni Malinen
62d4980331 Allow PMF to be enabled by default
Previously, PMF (protected management frames, IEEE 802.11w) could be
enabled only with a per-network parameter (ieee80211w). The new global
parameter (pmf) can now be used to change the default behavior to be PMF
enabled (pmf=1) or required (pmf=2) for network blocks that do not
override this with the ieee80211w parameter.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-24 22:21:29 +02:00
Amitkumar Karwar
368b1957a6 Allow OBSS scan and 20/40 coex reports to non-SME drivers
We enable this feature for non-SME drivers as well if
they explicitly indicate need for it.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
2012-11-24 18:08:48 +02:00
Jouni Malinen
3d83a6b9b6 Sync with linux/nl80211.h in wireless-testing.git
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-24 18:04:55 +02:00
Johannes Berg
3117ad4283 hostapd: Add second VHT frequency segment config
Add the configuration option vht_oper_centr_freq_seg1_idx
for the second segment of an 80+80 MHz channel and use it
when building the VHT operation IE.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-11-24 18:02:29 +02:00
Johannes Berg
202d97d477 hostapd: Add VHT PHY selector if VHT is required
If VHT is required, add the VHT PHY selector to
the (extended) supported rates IE.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-11-24 17:27:16 +02:00
Robert Shade
bff954e9a2 Verify that the selected BSS has a better signal level before roaming
This prevents situations like the following where we roam to a
lesser quality BSS just because the signal level delta is over our
threshold.

wlan0: Considering within-ESS reassociation
wlan0: Current BSS: 00:24:6c:74:0a:40 level=-51
wlan0: Selected BSS: 00:24:6c:74:0a:e0 level=-64
wlan0: Request association: reassociate: 0  selected: 00:24:6c:74:0a:e0
    bssid: 00:24:6c:74:0a:40  pending: 00:00:00:00:00:00  wpa_state: COMPLETED

Signed-hostap: Robert Shade <robert.shade@gmail.com>
2012-11-24 17:17:50 +02:00
Pontus Fuchs
fb660a9431 Do not double free cfg struct if netlink_init() fails
If netlink_init() fails on socket create or bind the cfg struct
provided as parameter is freed by netlink_init(). Callers of
netlink_init() also free this struct on their error paths leading
to double free.

Signed-hostap: Pontus Fuchs <pontus.fuchs@gmail.com>
2012-11-24 16:47:20 +02:00
Jouni Malinen
e99b4f3a14 HS 2.0: Add Home SP FQDN and roaming/home to status command
This allows the ctrl_iface STATUS information to be used to determine
which Home SP credential (domain in the cred block) was used and whether
the network is operated by the home SP.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-24 12:24:40 +02:00
Jouni Malinen
9afe52eb92 HS 2.0: Add REMOVE_CRED sp_fqdn=<FQDN> command
This allows credential entries to be removed based on SP FQDN without
having to iterate through the configured entries from an external
program to figure out which credentials should be removed for a specific
SP.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-24 12:24:37 +02:00
Jouni Malinen
736d4f2d77 HS 2.0: Remove temporary network block on cred block removal
If the credential that was used to create a temporary HS 2.0 network
block is removed, remove the network block, too.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-24 12:24:34 +02:00
Jouni Malinen
f403dcd648 HS 2.0: Maintain a copy of HS 2.0 Indication from Association Request
This allows the AP to figure out whether a station is a HS 2.0 STA
during the association and access any information that the STA may have
included in this element.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-24 12:24:31 +02:00
Jouni Malinen
d49ea68284 Android: Force group access to ctrl_iface directory
wpa_supplicant is started from /init.*.rc on Android and that seems
to be using umask 0077 which would leave the control interface
directory without group access. This breaks things since Wi-Fi
framework assumes that this directory can be accessed by other
applications in the wifi group. Fix this by adding group access even
if umask value would prevent this.

In most cases, this issue was not hit since the control interface
directory is normally created by that same init.*.rc file with suitable
mode and wpa_supplicant is killed in the way that does not allow it to
remove the file. However, if wpa_supplicant is allowed stop cleanly, it
will remove the directory and the next start could result with the Wi-Fi
framework not being able to use Wi-Fi (and GUI not showing Wi-Fi getting
enabled).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-23 17:06:36 +02:00
Sunil Dutt
ffa45a1343 P2P: Increase the maximum number of PD Request retries
Change the maximum retry limit from 10 to 120 to match the behavior
used with GO Negotiation Request frames when trying to start GO
Negotiation with a peer that does not acknowledge frames (e.g., due
to being in sleep or on another channel most of the time).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-23 01:15:51 +02:00
Sunil Dutt
6b947db103 P2P: Remove PD-before-join-timeout mechanism
The PD Request retry limit can be used to achieve the same behavior,
so drop this duplicated timeout mechanism and control the timeout
based on MAX_PROV_DISC_REQ_RETRIES.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-23 01:15:51 +02:00
Jouni Malinen
175171ac6c P2P: Retry PD Request in join-a-running-group case
The GO may be in sleep when we send a PD Request frame to indicate that
we are about to join a running group. Previously, this frame was not
retried more than normal low level retries. This can result in the GO
not getting the frame especially in cases where concurrent multi-channel
operations or aggressive sleep schedule is used since most drivers do
not yet synchronize with the GO's NoA before association.

Increase the likelihood of the GO receiving the PD Request frame by
retransmitting it similarly to the PD-for-GO-Negotiation case. Start
the actual join operation only after these retries have failed to get
an acknowledgment from the GO to give the connection attempt a chance
to succeed if the driver implements better NoA synchronization for it.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-23 00:53:42 +02:00
Sunil Dutt
6752716663 P2P: Set user_initiated_pd separately from the join parameter
p2p_prov_disc_req() used the join parameter to figure out whether the PD
request was a user initiated or not. This does not cover all use cases
of PD, so add a separate parameter to allow caller to indicate whether
the user requested the operation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-23 00:48:58 +02:00
Jouni Malinen
16e38f2e34 Android: Fix AP builds to include the new eap_user_db.c
This is needed to fix the builds after commit
ee431d77a5.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-21 17:55:36 +02:00
Vladimir Kondratiev
9c6f8cb9c8 Fix wpa_supplicant compilation after adding eap_user database
Commit ee431d77a5 broke wpa_supplicant
compilation:

../src/ap/ieee802_1x.o: In function `ieee802_1x_get_eap_user':
/../src/ap/ieee802_1x.c:1689: undefined reference to `hostapd_get_eap_user'
collect2: error: ld returned 1 exit status
make: *** [wpa_supplicant] Error 1

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
2012-11-21 17:49:47 +02:00
Jouni Malinen
ee431d77a5 Add preliminary support for using SQLite for eap_user database
CONFIG_SQLITE=y option can now be used to allow the eap_user_file text
file to be replaced with a SQLite database
(eap_user_file=sqlite:/path/to/sqlite.db). hostapd.eap_user_sqlite
shows an example of how the database tables can be created for this
purpose. This commit does not yet include full functionality of the
text file format, but at least basic EAP-TTLS/MSCHAPv2 style
authentication mechanisms with plaintext passwords can be used for
tests.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-21 00:47:47 +02:00
Jouni Malinen
6201b052c8 nl80211: Add support for TDLS request event from the driver
The NL80211_CMD_TDLS_OPER command can be used as an event based on a
recent cfg80211 commit, so add code to map that to internal
wpa_supplicant event to request TDLS link setup/teardown.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-19 17:00:07 +02:00
Jouni Malinen
af1dff8c9f wpa_cli: Accept more arguments for set_network
Some network parameters, e.g., auth_alg and eap use a space separated
list of values without quotation marks. To allow these to be entered
from the interactive mode, change set_network command to allow more than
three arguments.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-19 14:04:42 +02:00
Jouni Malinen
1ae1570b5f Update ChangeLog files to match the current implementation
This commit adds description of the main changes from the forking of
hostap-1.git for 1.x releases to the current master branch snapshot.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-18 21:30:38 +02:00
Jouni Malinen
c772d054c2 hostapd: Fix a regression in TKIP countermeasures processing
Commit 296a34f0c1 changed hostapd to
remove the internal STA entry at the beginning of TKIP countermeasures.
However, this did not take into account the case where this is triggered
by an EAPOL-Key error report from a station. In such a case, WPA
authenticator state machine may continue processing after having
processed the error report. This could result in use of freed memory.
Fix this by stopping WPA processing if the STA entry got removed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-18 13:06:03 +02:00
Jouni Malinen
6366a17ce3 WPS: Add a workaround for PBC session overlap detection
Some deployed station implementations implement WPS incorrectly and
end up causing PBC session overlap issues by indicating active PBC
mode in a scan after the WPS provisioning step. Work around this by
ignoring active PBC indication in a Probe Request from a station that
completed PBC provisioning during the last five seconds.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-15 19:59:04 +02:00
Jouni Malinen
1ce0aa044c Remove unused disassociate() driver_ops
Commits 07783eaaa0 and
3da372fae8 removed the only users of the
disassociate() driver operation, so these driver wrapper functions can
also be removed now.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-15 00:06:12 +02:00
Jouni Malinen
d2901915e7 Fix forgotten no-CONFIG_WPS=y wrapper
Commit 620c783753 modified
wpas_wps_ssid_wildcard_ok() prototype, but forgot to update the
non-WPS-build wrapper. Fix that to match with the new bss parameter
type and remove the now unused declaration of wpa_scan_res.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-14 13:05:53 +02:00
Jouni Malinen
6e2020210a Allow OKC to be enabled by default
Previously, OKC (opportunistic key caching, a.k.a. proactive key
caching) could be enabled only with a per-network parameter
(proactive_key_caching). The new global parameter (okc) can now be used
to change the default behavior to be OKC enabled (okc=1) for network
blocks that do not override this with the proactive_key_caching
parameter.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-12 20:07:53 +02:00
Jouni Malinen
8713a2e6ff P2P: Avoid extra group interface creation on GO reinvocation
If separate group interfaces are used, the pending group interface got
removed unnecessarily when stopping find operations when accepting an
invitation to reinvoke the group in GO role. This resulted in the group
interfaces getting created twice. Avoid this unnecessary extra operation
by skipping removal of the pending interface in the reinvocation
sequence.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-11 20:45:27 +02:00
Jouni Malinen
0779c227af Hide strict-aliasing warning with gcc 4.7
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-11 20:29:20 +02:00
Jouni Malinen
9d7a63dc20 nl80211: Avoid strict-aliasing warning with gcc 4.7
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-11 20:28:27 +02:00
Pawel Kulakowski
548f100384 bgscan_learn: Prevent infinite busy looping
In highly congested network (BSSes almost on every channel
within ESS) we have hit a bug when wpa_supplicant become
completly irresponsive, infinite looping on while loop.

When probe_idx was equal 0 and we are not able to probe
new frequency, following condition were never fulfilled:
"if (!in_array(freqs, data->supp_freqs[idx]))"

Signed-hostap: Pawel Kulakowski <pawel.kulakowski@tieto.com>
2012-11-11 16:26:36 +02:00
Robert Shade
99276998fa dbus: Do not quote scan_freq and freq_list
scan_freq and freq_list are not parsed by wpa_config_parse_freqs if
quoted.

Signed-hostap: Robert Shade <robert.shade@gmail.com>
2012-11-11 16:21:16 +02:00
Christopher Wiley
a8c5b43ad3 nl80211: Roam correctly through cfg80211 without SME
Change the nl80211 driver in wpa_supplicant to correctly handle
connecting to a new AP through cfg80211 without SME capability. As
before, the driver will disconnect from the previously associated AP,
but now we attempt to immediately connect to our intended AP. This
prevents us from blacklisting the AP we were trying to connect to
because of a semantic mismatch between cfg80211 and wpa_supplicant. The
disconnect/connect patch generates a local disconnect nl80211 event
which we discard because we're already correctly tracking the pending
association request.

In detail:

cfg80211 does not support connecting to a new BSS while already
connected to another BSS, if the underlying driver doesn't support
separate authenticate and associate commands. wpa_supplicant is written
to expect that this is a supported operation, except for a little error
handling that disconnects from the current BSS when roaming fails and
relies on autoconnect logic to reconnect later. However, this failure to
connect is incorrectly attributed to the new AP we attempted to
associate with, rather than a local condition in cfg80211.

The combined effect of these two conditions is that full-mac drivers
accessible through cfg80211 but without SME capability take a long time
to roam across BSS's because wpa_supplicant will:
1) Fail to associate for local reasons
2) Disconnect and return that the association request failed
3) Blacklist the association target (incorrectly)
4) Do a scan
5) Pick a less desirable AP to associate with

Signed-hostap: Christoper Wiley <wiley@chromium.org>
2012-11-11 16:15:29 +02:00
Jouni Malinen
c7deed7401 Fix a typo in a comment
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-11 16:09:36 +02:00
Baruch Siach
b49019dd3d atheros: Remove redundant l2_packet_get_own_addr call
Commit deca6eff74 added a redundant call
to l2_packet_get_own_addr. Use the information we already have in
atheros_init.

Signed-hostap: Baruch Siach <baruch@tkos.co.il>
2012-11-11 16:07:28 +02:00
Jouni Malinen
58fd49c05d EAP-SIM/AKA server: Fix memory leak in error path
If identity round limit is reached, EAP-SIM/AKA session is terminated.
This needs to free the allocated message.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-11 13:15:49 +02:00
Jouni Malinen
8cd93a01a9 Check hapd_iface more consistently in hostapd_disable_iface()
There is no point in the hapd_iface == NULL validate after this pointer
has been dereferences, so move the code dereferencing hapd_iface after
the check.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-11 13:11:15 +02:00
Jouni Malinen
207fb86411 WPS: Remove deprecated UFD config method and OOB ctrl_iface
The UFD (USB flash drive) configuration method was deprecated in WSC
2.0. Since this is not known to be used, remove the UFD implementation
from hostapd and wpa_supplicant to allow the WPS implementation to be
cleaned up. This removes the now unused OOB operations and ctrl_iface
commands that had already been deprecated by the new NFC operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-11 13:01:06 +02:00
Masashi Honma
30c371e8a5 P2P: Reduce redundant PSK generation for GO
The PSK generation done by pbkdf2_sha1() is one of the longest CPU time
users according to our profiling from boot to GO started.

So I have reduced some steps.

I could boot a GO by this command sequence.
-------------
add_net
set_network 0 ssid '"DIRECT-XX"'
set_network 0 psk
'"123456789012345678901234567890123456789012345678901234567890123"'
set_network 0 proto RSN
set_network 0 key_mgmt WPA-PSK
set_network 0 pairwise CCMP
set_network 0 auth_alg OPEN
set_network 0 mode 3
set_network 0 disabled 2
p2p_group_add persistent=0 freq=2412
-------------

By this sequence, pbkdf2_sha1() was called three times and the function
calculates the same value each time. Reduce number of calls to
pbkdf2_sha1() from 3 to 1 by caching the previous result.

Signed-hostap: Masashi Honma <masashi.honma at gmail.com>
2012-11-11 11:39:24 +02:00
Paul Stewart
45ac5793fc new_dbus_handlers: Clear errno
There are a few instances where dbus handlers test the value
of errno to test whether strtoul completes successfully.
Since strtoul does not clear errno, and there's no strong
reason to suspect that errno is already clear, it is safer
to clear it right before calling strtoul.  Also, any failure
in strtoul (setting errno non-zero) should be considered a
failure.

While testing using dbus-send, I found that a malformed
network path can cause a crash due to net_id being left
NULL.  We should test for this before calling strtoul
on it.

Tested with:

dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
    /fi/w1/wpa_supplicant1/Interfaces/0 \
    org.freedesktop.DBus.Properties.Get \
    string:fi.w1.wpa_supplicant1.Interface string:Networks
dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
   /fi/w1/wpa_supplicant1/Interfaces/0 \
   fi.w1.wpa_supplicant1.Interface.RemoveNetwork \
   objpath:/fi/w1/wpa_supplicant1/Interfaces/0/Networks/0
dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
   /fi/w1/wpa_supplicant1/Interfaces/0 \
   fi.w1.wpa_supplicant1.Interface.RemoveNetwork \
   objpath:/fi/w1/wpa_supplicant1/Interfaces/0/Networks/0
dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \
   /fi/w1/wpa_supplicant1/Interfaces/0 \
   fi.w1.wpa_supplicant1.Interface.RemoveNetwork \
   objpath:/fi/w1/wpa_supplicant1/Interfaces/0

Signed-hostap: Paul Stewart <pstew@chromium.org>
intended-for: hostap-1
2012-11-11 11:18:31 +02:00
Jouni Malinen
1e8a6e7553 Remove unused wpa_supplicant_disassociate()
This function is now unused after the last couple of commits that
removed the last uses, so remove this to keep code simpler since all
places that disassociate, can use deauthentication instead.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-05 17:05:37 +02:00
Jouni Malinen
3da372fae8 Use deauthentication instead of disassociation on RSN element mismatch
Even though the standard currently describes disassociation to be used
for RSN element mismatch between Beacon/Probe Response frames and
EAPOL-Key msg 3/4, this is unnecessary difference from other cases that
deauthenticate. In addition, there is no point in leaving the 802.11
Authentication in place in this case. To keep things simpler, use
deauthentication here to get rid of the only use of
wpa_sm_disassociate().

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-05 17:01:07 +02:00
Jouni Malinen
07783eaaa0 Use deauthentication instead of disassociation if not associated
cfg80211/mac80211 may reject disassociation command if association has
not yet been formed. Use deauthentication in cases where it is possible
that we are associating at the moment the command is issued.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-05 16:58:00 +02:00
Jouni Malinen
42d235477f Use wpa_drv_{disassociate,deauthenticate} while waiting for connection
wpa_supplicant_{disassociate,deauthenticate}() need to inform the driver
about decision to disconnect even if this happens during the time when
the driver is still trying to complete association. During that time,
wpa_s->bssid is not set, so the code in these functions needs to figure
out the correct BSSID based on that field or wpa_s->pending_bssid. In
addition, it is possible that the BSSID is not even known at
wpa_supplicant at this point in time when using drivers that perform BSS
selection internally. In those cases, the disconnect command needs to be
sent to the driver without the BSSID.

This fixes issues where the driver (or cfg80211 in particular) may be
left in mismatching state with wpa_supplicant when disconnection (e.g.,
due to a ctrl_iface command) happens between connection request and
association event.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-05 16:57:57 +02:00
Jouni Malinen
e50d01b4f1 WPS: Add support for NFC connection handover with nfcpy
This helper script can now handle both reading of a NFC tag and
initiation of NFC connection handover if a peer NFC device is touched.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-04 16:04:42 +02:00
Jouni Malinen
dab710c4d0 WPS: Move NFC tag processing into a separate function
This makes it cleaner to add processing of other NFC operations to the
python script.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-04 15:56:46 +02:00
Jouni Malinen
ec4f5a37b8 WPS: Move wpactrl setup into a separate function
This makes it easier to share this functionality for new NFC use cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-04 15:53:33 +02:00
Jouni Malinen
d4f612b7dd WPS: Add an example python script for NFC operations
wps-nfc.py uses nfcpy and python-wpactrl to provide NFC tag information
to wpa_supplicant for WPS operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-03 22:43:15 +02:00