Commit graph

521 commits

Author SHA1 Message Date
Jouni Malinen
c7068f106f WPS: Avoid bogus static analyzer warning in ndef_parse_record()
Use a local variable and check the record payload length validity before
writing it into record->payload_length in hopes of getting rid of a
bogus static analyzer warning. The negative return value was sufficient
to avoid record->payload_length being used, but that seems to be too
complex for some analyzers. (CID 122668)

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 20:43:17 +03:00
Jouni Malinen
2456264fad NFC: Add a hardcoded limit on maximum NDEF payload length
While this is already enforced in practice due to the limits on the
maximum control interface command length and total_length bounds
checking here, this explicit check on payload_length value may help
static analyzers understand the code better. (CID 122668)

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-08 17:03:34 +03:00
Jouni Malinen
df9079e727 NFC: Fix payload length validation in NDEF record parser
It was possible for the 32-bit record->total_length value to end up
wrapping around due to integer overflow if the longer form of payload
length field is used and record->payload_length gets a value close to
2^32. This could result in ndef_parse_record() accepting a too large
payload length value and the record type filter reading up to about 20
bytes beyond the end of the buffer and potentially killing the process.
This could also result in an attempt to allocate close to 2^32 bytes of
heap memory and if that were to succeed, a buffer read overflow of the
same length which would most likely result in the process termination.
In case of record->total_length ending up getting the value 0, there
would be no buffer read overflow, but record parsing would result in an
infinite loop in ndef_parse_records().

Any of these error cases could potentially be used for denial of service
attacks over NFC by using a malformed NDEF record on an NFC Tag or
sending them during NFC connection handover if the application providing
the NDEF message to hostapd/wpa_supplicant did no validation of the
received records. While such validation is likely done in the NFC stack
that needs to parse the NFC messages before further processing,
hostapd/wpa_supplicant better be prepared for any data being included
here.

Fix this by validating record->payload_length value in a way that
detects integer overflow. (CID 122668)

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-08 16:52:25 +03:00
Jouni Malinen
fc880b11ed NFC: Avoid misaligned read of an NDEF field
The 32-bit version of payload length field may not be 32-bit aligned in
the message buffer, so use WPA_GET_BE32() to read it instead of ntohl().

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
8640cf7f8f WPS: Add more debug prints to httpread
These can be helpful when debugging HTTP error cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-03 18:26:50 +03:00
Jouni Malinen
1bd0d578a9 WPS: Replace the httpread_debug design with standard debug prints
The debug information from httpread can be helpful in figuring out error
cases in general and as such, should be enabled by default. Get rid of
the hardcoded httpread_debug value that would require source code
changes to enable.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-03 18:26:50 +03:00
Jouni Malinen
7da4f4b499 WPS: Check maximum HTTP body length earlier in the process
There is no need to continue processing a HTTP body when it becomes
clear that the end result would be over the maximum length.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-03 18:26:50 +03:00
Jouni Malinen
af185d0b57 WPS: Extra validation step for HTTP reader
Verify that ncopy parameter to memcpy is not negative. While this is not
supposed to be needed, it is a good additional protection against
unknown implementation issues.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-03 18:26:50 +03:00
Jouni Malinen
5acd23f458 WPS: Fix HTTP chunked transfer encoding parser
strtoul() return value may end up overflowing the int h->chunk_size and
resulting in a negative value to be stored as the chunk_size. This could
result in the following memcpy operation using a very large length
argument which would result in a buffer overflow and segmentation fault.

This could have been used to cause a denial service by any device that
has been authorized for network access (either wireless or wired). This
would affect both the WPS UPnP functionality in a WPS AP (hostapd with
upnp_iface parameter set in the configuration) and WPS ER
(wpa_supplicant with WPS_ER_START control interface command used).

Validate the parsed chunk length value to avoid this. In addition to
rejecting negative values, we can also reject chunk size that would be
larger than the maximum configured body length.

Thanks to Kostya Kortchinsky of Google security team for discovering and
reporting this issue.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-03 18:26:50 +03:00
Hamad Kadmany
01a025937c WPS: Add support for 60 GHz band
Handling of WPS RF band for 60 GHz was missing. Add it in all relevant
places and also map "AES" as the cipher to GCMP instead of CCMP when
operating on the 60 GHz band.

Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
2015-04-28 00:22:16 +03:00
Mikael Kanstrup
8b423edbd3 Declare all read only data structures as const
By analysing objdump output some read only structures were found in
.data section. To help compiler further optimize code declare these
as const.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2015-04-25 17:33:06 +03:00
Jouni Malinen
ca68a8b561 WPS: Explicitly reject Public Key attribute with unexpected length
There is no need to try to derive DH shared key with a peer that tries
to use too short or too long DH Public Key. Previously, such cases ended
up implicitly getting rejected by the DH operations failing to produce
matching results. That is unnecessarily, so simply reject the message
completely if it does not have a Public Key with valid length. Accept
couple of octets shorter value to be used to avoid interoperability
issues if there are implementations that do not use zero-padding
properly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 22:05:12 +03:00
Jouni Malinen
6b94f71dcd WPS: Truncate variable length string attributes to maximum length
This enforces variable length strings Manufacturer, Model Name, Model
Number, and Serial Number to be within the maximum length defined in the
WSC specification. While none of the existing users for these within
hostapd/wpa_supplicant had problems with longer strings, it is good to
ensure the strings are not longer to avoid potential issues at higher
layer components.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 22:05:12 +03:00
Jouni Malinen
a65d7495b5 tests: Add p2p-fuzzer
This program can be used to run fuzzing tests for areas related to P2P
message parsing and processing. p2p-fuzzer allows data files to be used
to inject Probe Response and Action frames for processing by the P2P
module.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 11:44:19 +03:00
Jouni Malinen
0f5acfba06 Use common is_ctrl_char() helper function
This modifies couple of code segments that replaced control characters
in strings with '_' to use a common helper function.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:19 +03:00
Jouni Malinen
5a041acc0a WPS: Ignore too long SSID attribute
While it looks like all the users of this parsed attribute were able to
handle longer SSID values, there is no valid use case for these and to
avoid any potential future issues, enforce maximum length (32 bytes) on
the SSID during parsing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:19 +03:00
Jouni Malinen
d9d1b9527a Use SSID_MAX_LEN define instead of value 32 when comparing SSID length
This makes the implementation easier to understand.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:18 +03:00
Jouni Malinen
65b10253d6 WPS: Ignore too long Device Name attribute
While it looks like all the users of this parsed attribute were able to
handle longer Device Name values, there is no valid use case for these
and to avoid any potential issues in upper layer components, enforce
maximum length (32 bytes) on the Device Name during parsing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:18 +03:00
Jouni Malinen
cc6f24380c Add WPS_DEV_NAME_MAX_LEN define and use it when comparing length
This make code easier to understand.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:18 +03:00
Brian Gix
4f88fc0464 P2PS: WPS changes needed for P2PS default PIN
This provides additional WPS definitions and rules for negotiating use
of P2PS default PIN configuration method.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-02 16:55:45 +02:00
Jouni Malinen
6b46bfa751 WPS: Re-fix an interoperability issue with mixed mode and AP Settings
Commit ce7b56afab ('WPS: Fix an
interoperability issue with mixed mode and AP Settings') added code to
filter M7 Authentication/Encryption Type attributes into a single bit
value in mixed mode (WPA+WPA2) cases to work around issues with Windows
7. This workaround was lost in commit
d7a15d5953 ('WPS: Indicate current AP
settings in M7 in unconfigurated state') that fixed unconfigured state
values in AP Settings, but did not take into account the earlier
workaround for mixed mode.

Re-introduce filtering of Authentication/Encryption Type attributes for
M7 based on the current AP configuration. In other words, merge those
two earlier commits together to include both the earlier workaround the
newer fix.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-19 18:35:59 +02:00
Jouni Malinen
422ba11e30 Flush WPS registrar state on wpa_supplicant FLUSH command
This helps hwsim test cases by avoiding undesired state from previously
executed test cases affecting following tests.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-21 17:47:42 +02:00
Jouni Malinen
d85e1fc8a5 Check os_snprintf() result more consistently - automatic 1
This converts os_snprintf() result validation cases to use
os_snprintf_error() where the exact rule used in os_snprintf_error() was
used. These changes were done automatically with spatch using the
following semantic patch:

@@
identifier E1;
expression E2,E3,E4,E5,E6;
statement S1;
@@

(
  E1 = os_snprintf(E2, E3, ...);
|
  int E1 = os_snprintf(E2, E3, ...);
|
  if (E5)
	E1 = os_snprintf(E2, E3, ...);
  else
	E1 = os_snprintf(E2, E3, ...);
|
  if (E5)
	E1 = os_snprintf(E2, E3, ...);
  else if (E6)
	E1 = os_snprintf(E2, E3, ...);
  else
	E1 = 0;
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	return -1;
  }
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else if (E6) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	return -1;
  }
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	E1 = os_snprintf(E2, E3, ...);
  }
)
? os_free(E4);
- if (E1 < 0 || \( E1 >= E3 \| (size_t) E1 >= E3 \| (unsigned int) E1 >= E3 \| E1 >= (int) E3 \))
+ if (os_snprintf_error(E3, E1))
(
  S1
|
{ ... }
)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Ilan Peer
f64d3f0e15 WPS: Add missing device types
Add missing device category and device sub category definitions.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-26 01:24:08 +03:00
Jouni Malinen
683b408a9e WPS UPnP: Check os_get_random() result more consistently
While the value here would not matter much, make the implementation more
consistent (CID 72692).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 19:08:30 +03:00
Jouni Malinen
92b5b371b6 WPS UPnP: Check os_get_random() result
This makes the implementation more consistent (CID 72705).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 18:58:17 +03:00
Jouni Malinen
3e9fa3be62 WPS UPnP: Make dl_list_first() use easier for static analyzer
The preceding dl_list_len() check guarantees that dl_list_first()
returns an entry and not NULL. However, that seems to be a bit too
difficult path to follow for static analyzers, so add an explicit check
for the dl_list_first() return value to be non-NULL to avoid warnings.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 13:45:25 +03:00
Jouni Malinen
8511a0f67b WPS: Extend internal entropy pool help for key/snonce derivation
The internal entropy pool was previously used to prevent 4-way handshake
in AP mode from completing before sufficient entropy was available to
allow secure keys to be generated. This commit extends that workaround
for boards that do not provide secure OS level PRNG (e.g., /dev/urandom
does not get enough entropy) for the most critical WPS operations by
rejecting AP-as-enrollee case (use of AP PIN to learn/modify AP
configuration) and new PSK/passphrase generation. This does not have any
effect on devices that have an appropriately working OS level PRNG
(e.g., /dev/random and /dev/urandom on Linux).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-08 12:54:18 +03:00
Jouni Malinen
18389abcca WPS: Clear keys/PINs explicitly
Use an explicit memset call to clear any configuration parameter and
dynamic data that contains private information like keys or identity.
This brings in an additional layer of protection by reducing the length
of time this type of private data is kept in memory.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:52:08 +03:00
Jouni Malinen
ce9c9bcc38 WPS: Use os_memcmp_const() for hash/password comparisons
This makes the implementation less likely to provide useful timing
information to potential attackers from comparisons of information
received from a remote device and private material known only by the
authorized devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:47 +03:00
Jouni Malinen
305000e160 WPS: Check wps_build_wfa_ext() return value consistently (CID 68104)
While this call cannot really fail, check the return value to be more
consistent with all the other wps_build_wfa_ext() calls.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-14 12:32:52 +03:00
Jouni Malinen
c02f35fb59 WPS: Clean up indentation level (CID 68109)
The implementation here was doing what it was supposed to, but the code
was indented in a way that made it quite confusing in the context of a
single line if statement body.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-12 19:45:31 +03:00
Jouni Malinen
86388afa56 WPS: Check for theoretical gmtime() failure
In theory, gmtime() could return NULL if the year value would not fit
into an integer. However, that cannot really happen with the current
time() value in practice. Anyway, clean up static analyzer reports by
checking for this corner case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-07 17:39:51 +03:00
Jouni Malinen
d75a5ae018 WPS ER: Fix UDN parser to handle missing field
Must check that UDN was present before trying to parse it. Avoid a NULL
pointer dereference by checking the result before using os_strstr() when
parsing device description from an AP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-07 17:35:22 +03:00
Jouni Malinen
0bceb8d6f4 Make dl_list_first() and dl_list_last() uses easier for static analyzers
The previous check for dl_list_len() or having an entry from the list is
sufficient, but some static analyzers cannot figure out that
dl_list_first() and dl_list_last() will return non-NULL in this type of
cases. Avoid invalid reports by explicitly checking for NULL.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
5f693cb1b6 WPS HTTP: Remove unused assignment
bbp is not used in the code path that skips trailers.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
27b418715f WPS: Print setsockopt() failure in debug log
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-28 16:54:09 +03:00
Jouni Malinen
dc39004318 WPS: Remove unused WEP related functionality
Now that WPS 2.0 support is enabled unconditionally, WEP and Shared auth
type are not allowed. This made some of the older code unused and that
can now be removed to clean up the implementation. There is still one
place where WEP is allowed for testing purposes: wpa_supplicant as
Registrar trying to configure an AP to use WEP. That is now only allowed
in CONFIG_TESTING_OPTIONS=y builds, though.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-06 12:31:45 +03:00
Jouni Malinen
c201f93a9e WPS: Enable WSC 2.0 support unconditionally
There is not much point in building devices with WPS 1.0 only supported
nowadays. As such, there is not sufficient justification for maintaining
extra complexity for the CONFIG_WPS2 build option either. Remove this by
enabling WSC 2.0 support unconditionally.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-25 18:33:21 +02:00
Jouni Malinen
f19e370e15 WPS: Do not advertise WPA/WPA2-Enterprise Auth Type Flags
While the device itself may support WPA/WPA2-Enterprise, enrollment of
credentials for EAP authentication is not supported through WPS. As
such, there is no need to claim support for these capabilities within
WPS information.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-20 15:13:48 +02:00
Jouni Malinen
fdb45355d4 WPS: Extend per-station PSK to support ER case as well
When wpa_psk_file is used instead of wpa_psk/wpa_passphrase, each WPS
Enrollee was given a unique PSK. This did not work for the
station-as-Registrar case where ER would learn the current AP settings
instead of enrolling itself (i.e., when using the AP PIN instead of
station PIN). That case can be covered with a similar design, so
generate a per-device PSK when building M7 as an AP in wpa_psk_file
configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-13 18:22:25 +02:00
Rahul Jain
8714caa1c2 WPS: Parse Registrar Configuration Methods
This new subelement was added into the WFA Vendor Extension.

Signed-off-by: Rahul Jain <rahul.jain@samsung.com>
2014-03-05 23:26:16 +02:00
Jouni Malinen
3b6170b78d WPS: Remove duplicate variable setting
There is no need to use a for loop here since the h variable is
set identically at the beginning of the body anyway.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 17:15:12 +02:00
Jouni Malinen
bd27b1360f Make code path easier for static analyzers
record->type == NULL case was handled through the record->type_length
comparison. While this was correct, it is a bit difficult for static
analyzers to understand, so add an extra check for NULL to avoid false
reports on this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 17:15:11 +02:00
Jouni Malinen
329039869a WPS: Fix UNSUBSCRIBE error returns if NT or CALLBACK header is used
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-22 18:58:33 +02:00
Jouni Malinen
f34df28e93 WPS: Fix UNSUBSCRIBE to return 412 if no SID match found
UPnP-arch-DeviceArchitecture describe ErrorCode 412 to be used for the
case where no un-epxired subscription matches. This used to return 200
which is not strictly speaking correct even though it is unlikely to
cause any problems.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-22 18:58:33 +02:00
Jouni Malinen
80f256a568 WPS: Remove unnecessary filename NULL check
The caller of the GET parser is checking this already and the GET case
was the only one that ended up doing the duplicated validation step.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-22 14:07:23 +02:00
Jouni Malinen
3cdcb3a4b3 tests: Add module tests for WPS attribute parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-02-21 13:41:30 +02:00
Jouni Malinen
da179bd0e1 WPS: Fix parsing of 0-length WFA vendor extension subelement
The previous parser would have skipped a WFA vendor extension attribute
that includes only a single zero-length subelement. No such subelement
has been defined so far, so this does not really affect any
functionality, but better make the parser address this correctly should
such an element ever be added.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-21 13:08:08 +02:00
Jouni Malinen
8c18fcc237 WPS: Add more debug information to M7 AP Settings
This allows the AP Settings data to be included in debug log
(only with -K on command line).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-07 19:33:47 +02:00
Jouni Malinen
d7a15d5953 WPS: Indicate current AP settings in M7 in unconfigurated state
Previously, unconfigured state was forcing the best supported
authentication and encryption state to be shown in WPS messages,
including AP Settings in M7 in case the AP acts as an Enrollee. This is
not really correct for the AP Settings case, so change that one to
indicate the currently configured state.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-07 19:33:19 +02:00
Jouni Malinen
0b5ff2ae12 WPS: Remove unused Credential AP Channel processing
Commit bd3a373767 added a mechanism to use
AP Channel attribute from within a Credential attribute to optimize
scans. However, this design is not actually used with the WPS NFC use
cases. With configuration token, the AP Channel attribute is in the same
container with the Credential attribute (and that was also handled in
the previous implementation). With connection handover, AP Channel
information is outside the Credential attribute as well.

Simplify implementation by removing the AP Channel within Credential
case. This allows wpas_wps_use_cred() to get the AP Channel from the
container instead of having to find this during credential iteration.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-04 13:23:35 +02:00
Jouni Malinen
1536cb5756 WPS: Remove unused 802.1X attribute parsing and processing
This is not really used in practice and there is no need to maintain
unsed code that would only print debug log entries.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-04 13:23:35 +02:00
Jouni Malinen
91226e0d12 WPS: Add testing option to corrupt public key hash
If CONFIG_WPS_TESTING=y is enabled in build configuration, the new
wps_corrupt_pkhash parameter (similar to wps_testing_dummy_cred) can be
used to request public key hash to be corrupted in all generated OOB
Device Password attributes. This can be used for testing purposes to
validate public key hash validation steps.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:31 +02:00
Jouni Malinen
d2f18378e1 WPS NFC: Add BSSID and AP channel info to Configuration Token
This information can help the Enrollee to find the AP more quickly with
an optimized scan.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:31 +02:00
Jouni Malinen
75dbf98157 WPS-STRICT: Update valid Device Password ID and Config Error range
Accept the new values defined for WPS NFC.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:31 +02:00
Jouni Malinen
dd87677115 P2P NFC: Enable own NFC Tag on GO Registrar
When "P2P_SET nfc_tag 1" is used to enable the own NFC Tag for P2P, also
enable it for any running GO interface.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:30 +02:00
Jouni Malinen
ac08752d28 WPS NFC: Use pubkey mismatch config error from Enrollee
This was already done for Registrar, but the Enrollee case did not
set config error properly if Registrar public key did not match the
hash received during NFC connection handover.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:44:30 +02:00
Jouni Malinen
db6ae69e6b P2P NFC: Report connection handover as trigger for P2P
"NFC_REPORT_HANDOVER {INIT,RESP} P2P <req> <sel>" can now be used to
report completed NFC negotiated connection handover in which the P2P
alternative carrier was selected.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:56 +02:00
Jouni Malinen
5154689468 P2P NFC: Add WPS attribute building for P2P NFC
These functions can be used to build the WPS attributes for P2P NFC
connection handover messages.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
01afd8dbd7 P2P NFC: Add NDEF helpers for P2P connection handover messages
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
14d8645f63 WPS NFC: Allow BSSID and channel to be included in handover select
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
50d1f8901c NFC: Update WPS ER to use the new connection handover design
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
41f9ffb635 WPS NFC: Build new style carrier record for connection handover request
It is more useful to be able to build a single NFC carrier record
instead of the full connection handover request message to allow
external components to decide whether to negotiate which alternative
carrier is used. This updates the carrier record contents to the new
design to include Enrollee public key hash and provides this as a
carrier record instead of full message. An external program is expected
to be used to build the full NFC connection handover message with
potentially other alternative carrier records included.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
3f1639da57 WPS NFC: Split DH key generation to a separate function
This allows DH key generation to be shared for other purposes than just
the case of OOB Device Password building. In addition, force the DH
public key buffer to be full 192 octets with zero padding to avoid
issues with the buffer being used in messages sent to a peer device.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
975491793b WPS NFC: Update NFC connection handover design
The new Device Password ID 7 is used to indicate that NFC connection
handover is used with DH public key hash from both devices being
exchanged over the NFC connection handover messages. This allows an
abbreviated M1-M2 handshake to be used since Device Password does not
need to be used when DH is authenticated with the out-of-band
information (validation of the public key against the hash).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
34b6795015 WPS NFC: Use abbreviated handshake if both PK hashes delivered OOB
When both the Registrar and Enrollee public key hashes are delivered
out-of-band (in NFC connection handover), use abbreviated WPS handshake
(skip M3-M8).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
5f4545573f WPS NFC: Validate peer public key hash on Enrollee
Since the Enrollee can now get the public key hash from the Registrar,
there is need to validate this during the WPS protocol run.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
ff40cd6dd1 WPS NFC: Send M2D with config error 20 on pkhash mismatch
Instead of terminating the WPS protocol immediately, go through an M2D
exchange to notify Enrollee of the public key hash mismatch.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
e435417eef WPS: Remove Version attribute from NFC messages
This old Version attribute is not really needed anymore for these use
cases with the assumption that there are no existing WPS+NFC
deployments. It was removed from the WSC specification, so make the
implementation match that change.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
72403ecef7 WPS: Add builder functions for AP Channel and RF Bands attributes
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 21:10:55 +02:00
Jouni Malinen
ea6fc58ccf WPS: Convert printf() debug print to use wpa_printf()
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:11 +02:00
Jouni Malinen
67807132cf WPS: Remove unused send_wpabuf()
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:33 +02:00
Jouni Malinen
75d1d0f7b6 WPS: Allow testing mode to disable 2.0 functionality
Previously, wps_version_number was used only to test extensibility to
newer version numbers, but it can also be used to enable testing of
older versions (1.0), e.g., to avoid hitting some 2.0 specific
validation steps.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:32 +02:00
Jouni Malinen
f7e2542f28 Remove unused wps_device_data_dup()
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:32 +02:00
Jouni Malinen
c89d9dba9c Remove unnecessary extra tracking of eloop registration
It is fine to try to cancel a registration that does not exist, so there
is no need to have the duplicated checks for eloop timeout and socket
registration.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:32 +02:00
Jouni Malinen
c86bf160a7 Replace unnecessary hex_value() with hex2byte()
There is no need to maintain two functions for doing
the same type of hex-to-binary conversion.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:32 +02:00
Jouni Malinen
c9629476f3 WPS ER: Fix deinit timeout handling with delayed/failing unsubscribe
The five second timeout to call wps_er_deinit_finish() could potentially
be left behind when removing the ER data based on some other event. This
could result in double-freeing of wps_er context killing the process,
e.g., if the WPS ER functionality is stopped while in the process of
unsubscribing from an AP and then restarted.

In addition, AP entries could still be present in the
er->ap_unsubscribing list when the deinit timeout hits. These entries
would still maintain HTTP context pointing to the ER which would be
freed here and as such, the following HTTP client callback could refer
to freed memory and kill the process. Fix this by freeing AP entries
from ap_unsubscribing list when ER is deinitialized from timeout even if
such AP entries have not completed unsubscription from UPnP events.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-12-26 20:50:28 +02:00
Johannes Berg
196a217403 WPS_UPNP: Use monotonic time for event debouncing
The event debouncing isn't very accurate (since it doesn't
take sub-second resolution into account), but it should use
monotonic time anyway since it doesn't care about the wall
clock.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:57:10 +02:00
Johannes Berg
864c9afa6d wps_registrar: Use monotonic time for PBC workaround
The PBC ignore-start workaround just needs to check whether
the time is within 5 seconds, so should use monotonic time.

While at it, add a few more ifdefs to clearly separate the
code and variables needed.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:54:40 +02:00
Johannes Berg
61e98e9cf7 wps_registrar: Use monotonic time for PBC session timeout
PBC sessions are just time-stamped when activated, and
eventually time out, so should use monotonic time.

While at it, make the code use os_reltime_expired().

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:52:49 +02:00
Johannes Berg
3647e5a7cb wps_registrar: Use monotonic time for PIN timeout
If the PIN expires, then a timeout is given, so that monotonic
time should be used.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:51:41 +02:00
Jouni Malinen
7feff06567 Add CONFIG_CODE_COVERAGE=y option for gcov
This can be used to measure code coverage from test scripts.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-24 19:16:12 +02:00
Jouni Malinen
b6881b5218 WPS NFC: Add more debug for NFC Password Token matching
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 13:48:49 +02:00
Jouni Malinen
67a88a747c WPS NFC: Add debug log entry on OOB Dev Pw attribute addition
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-07 13:48:42 +02:00
Jouni Malinen
3318376101 Add explicit buffer length checks for p2p_build_wps_ie()
Even though the length of this buffer is based only on locally
configured information, it is cleaner to include explicit buffer room
validation steps when adding the attributes into the buffer.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 15:55:46 +03:00
Jouni Malinen
e88060e1a7 HTTP server: Allow TCP socket to be reused
This makes it easier to handle cases where the application is restarted
and the previously used local TCP port may not have been fully cleared
in the network stack.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-10-18 14:13:45 +03:00
Jouni Malinen
d047ae6278 WPS: Ignore PBC-to-PIN change from M1 to M2 as a workaround
Some APs may incorrectly change Device Password ID from PBC in M1 to
Default PIN in M2 even when they are ready to continue with PBC. This
behavior used to work with earlier implementation in wpa_supplicant, but
commit b4a17a6ea7 started validating this
as part of a change that is needed to support NFC configuration method.

While this kind of AP behavior is against the WSC specification and
there could be potential use cases for moving from PBC to PIN, e.g., in
case of PBC session overlap, it is justifiable to work around this issue
to avoid interoperability issues with deployed APs. There are no known
implementations of PBC-to-PIN change from M1 to M2, so this should not
reduce available functionality in practice.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-09-14 12:02:33 -07:00
Jouni Malinen
52177fbb70 P2P: Store P2P Device Address in per-device PSK records
This makes the P2P Device Address of the Enrollee available with the PSK
records to allow P2P Device Address instead of P2P Interface Address to
be used for finding the correct PSK.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 10:47:34 +03:00
Jouni Malinen
05766ed8de P2P: Allow per-device PSK to be assigned
"wpa_cli p2p_set per_sta_psk <0/1>" can now be used to disable/enable
use of per-device PSKs in P2P groups. This is disabled by default.
When enabled, a default passphrase is still generated by the GO for
legacy stations, but all P2P and non-P2P devices using WPS will get
a unique PSK.

This gives more protection for the P2P group by preventing clients from
being able to derive the unicast keys used by other clients. This is
also a step towards allowing specific clients to be removed from a group
reliably without having to tear down the full group to do so.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-09-01 10:14:29 +03:00
David Spinadel
239abaf2ab WPS: Set currently used RF band in RF Bands attribute
According to WSC specification (Ver 2.0.2, section 8.3), RF Bands
attribute should be set to the specific RF band used for the current
message. Add an option to set wanted band in wps_build_rf_bands() and
add a callback to get the current band from wpa_supplicant and hostapd.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-08-25 10:55:53 +03:00
Jeffin Mammen
e96872a4f2 WPS: Track peer MAC address from the last operations
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 17:48:59 +03:00
Jeffin Mammen
61b6520e16 WPS: Track result of the latest WPS operation
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 17:48:20 +03:00
Jeffin Mammen
50396e29da WPS: Add PBC mode activated/disabled events
This makes it easier to track PBC state on the registrar.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 16:52:48 +03:00
Jouni Malinen
961750c1e8 WPS: Share a common function for error strings
This makes it easier to maintain the list of WPS_EI_* error values and
matching strings.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-23 16:32:34 +03:00
Jouni Malinen
eb7ddbf108 WPS: Stop SSDP service before freeing the pending entries
This avoids debug warnings about freeing referenced memory.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-11 17:03:50 +03:00
Jouni Malinen
9b1693a162 WPS: Allow Device Password Id changes between PIN methods
Commit b4a17a6ea7 added support for the
WPS Registrar to change the Device Password based on WSC specification
design. However, this added validation for Registrar behavior which
resulted in preventing a common P2P use case from working. Relax the
validation rules for builds with P2P enabled to allow the Enrollee (P2P
client) accepting M1/M2 changes in Device Password Id between Default
and Registrar-specified PIN.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-28 00:35:47 +03:00
Jouni Malinen
11e5a49c28 WPS: Do not use void* in arithmetic
This is a C compiler extension and not needed, so replace with standard
compliant way of calculating the pointer.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-04 20:19:45 +03:00
Jouni Malinen
c64686229f WPS ER: Allow UPnP interface to be forced
"WPS_ER_START ifname=<interace>" can now be used to force a specific
interface to be used for UPnP operations. This is especially useful for
automated test cases where the lo interface can now be used easily to
perform ER operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-28 21:56:24 +03:00
Jouni Malinen
5e24dc8a4b Add dup_binstr() to help common binary string tasks
There are quite a few places in the current implementation where a nul
terminated string is generated from binary data. Add a helper function
to simplify the code a bit.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-04-27 23:44:59 +03:00