Commit graph

721 commits

Author SHA1 Message Date
Jouni Malinen
3642c4313a Annotate places depending on strong random numbers
This commit adds a new wrapper, random_get_bytes(), that is currently
defined to use os_get_random() as is. The places using
random_get_bytes() depend on the returned value being strong random
number, i.e., something that is infeasible for external device to
figure out. These values are used either directly as a key or as
nonces/challenges that are used as input for key derivation or
authentication.

The remaining direct uses of os_get_random() do not need as strong
random numbers to function correctly.
2010-11-24 01:05:20 +02:00
Jouni Malinen
1bdb7ab3af Re-initialize GMK and Key Counter on first station connection
This adds more time for the system entropy pool to be filled before
requesting random data for generating the WPA/WPA2 encryption keys.
This can be helpful especially on embedded devices that do not have
hardware random number generator and may lack good sources of
randomness especially early in the bootup sequence when hostapd is
likely to be started.

GMK and Key Counter are still initialized once in the beginning to
match the RSN Authenticator state machine behavior and to make sure
that the driver does not transmit broadcast frames unencrypted.
However, both GMK (and GTK derived from it) and Key Counter will be
re-initialized when the first station connects and is about to
enter 4-way handshake.
2010-11-24 00:52:46 +02:00
Jouni Malinen
3c7302c219 Report errors from key derivation/configuration
Eventually, these should be acted on, so at least get the return
values passed one layer up.
2010-11-23 01:05:26 +02:00
Jouni Malinen
5cb9d5c3d1 Mix in more data to GTK/IGTK derivation
The example GMK-to-GTK derivation described in the IEEE 802.11 standard
is marked informative and there is no protocol reason for following it
since this derivation is done only on the AP/Authenticator and does not
need to match with the Supplicant. Mix in more data into the derivation
process to get more separation from GMK.
2010-11-23 00:57:14 +02:00
Jouni Malinen
f3b87561d7 Share WPA IE parser function for RSN authenticator/supplicant
There is no point in maintaining two almost identical versions
of this parser. Move WPA IE parser into wpa_common.c similarly
to what was already the case with RSN IE parse.
2010-11-12 21:52:14 +02:00
Jouni Malinen
8ea3dd21d2 AP: Verify that HT40 secondary channel is supported
Refuse to enable HT40 mode AP unless both the primary and secondary
channels are enabled for AP use.
2010-11-12 18:31:56 +02:00
Jouni Malinen
fd806bac5f WPS: Change concurrent radio AP to use only one WPS UPnP instance
WPS external Registrars can get confused about multiple UPnP
instances (one per radio) on a dual-concurrent APs. Simplify the
design by sharing a single UPnP state machine for all wireless
interfaces controlled by hostapd. This matches with the previous
changes that made a single command enable WPS functionality on
all interfaces.

This is relatively minimal change to address the sharing of the
state among multiple struct hostapd_data instances. More cleanup
can be done separately to remove unnecessary copies of information.
2010-11-11 14:50:13 +02:00
Felix Fietkau
c2aa25fb34 hostapd: Fix config reload for multi-BSS
Secondary BSS interfaces need to be activated after the config has
been reloaded.
2010-11-09 16:35:49 +02:00
Felix Fietkau
d3b4286967 Allow client isolation to be configured (ap_isolate=1)
Client isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging is
allowed.
2010-11-09 16:27:15 +02:00
Felix Fietkau
5a5009dc92 Fix rate table handling
With the nl80211 driver, the rate table is mode dependent, so it
must be initialized after the hardware mode has been selected.
2010-11-09 16:17:50 +02:00
Felix Fietkau
d38ae2ea85 Add bridge handling for WDS STA interfaces
By default, add them to the configured bridge of the AP interface
(if present), but allow the user to specify a separate bridge.
2010-11-09 16:12:42 +02:00
Felix Fietkau
7826ceae91 Fix WDS STA reassociation
If the STA entry is present in hostapd, but not in the kernel driver, its
WDS status needs to be restored when the STA reassociates
2010-11-09 16:00:09 +02:00
Jouni Malinen
6fc58a89e1 Fix EAP standalone server
Commit c3fc47ea8e fixed EAP passthrough
server to allow Logoff/Re-authentication to be used. However, it
broke EAP standalone server while doing that. Fix this by reverting
the earlier fix and by clearing the EAP Identity information in the
EAP server code whenever an EAPOL-Start or EAPOL-Logoff packet is
received.
2010-11-07 16:25:35 +02:00
Jouni Malinen
7e3c178142 Remove unused TX queue parameters related to Beacon frames
These are not used by any driver wrapper, i.e., only the four
data queues (BK, BE, VI, VO) are configurable. Better remove these
so that there is no confusion about being able to configure
something additional.
2010-11-05 01:23:17 +02:00
Jouni Malinen
8dcb61ce5d WPS: Comment out WEP configuration lines on reconfig 2010-11-04 17:02:16 +02:00
Jouni Malinen
c926593119 Allow EAPOL frames from pre-authenticating station to be processed 2010-10-27 11:34:29 +03:00
Jouni Malinen
e11f5a2cbc hostapd: Set operstate UP when initializing AP mode
This is needed to avoid problems with other applications setting and
leaving the interface to IF_OPER_DORMANT state. In AP mode, the interface
is ready immediately after the keys are set, so we better make sure the
DORMANT state does not prevent normal operations after that.
2010-10-26 16:30:28 +03:00
Jouni Malinen
3e7533b399 WPS ER: Show SetSelectedRegistrar events as ctrl_iface events
This makes it easier to figure out if something goes wrong in
preparing the AP for enrolling a station.
2010-10-25 21:29:22 +03:00
Jouni Malinen
1f4c7b6b2a hostapd: Fix compiler warning
Commit 83e843e830 copied a workaround
without updating the return value to match with the void function.
2010-10-25 13:38:06 +03:00
Jouni Malinen
83e843e830 hostapd: Avoid crashing on station mode disassoc event
Some driver wrappers may end up indicating a disassociation or
deauthentication event without the address of the station, e.g.,
based on a previous non-AP mode event. Avoid crashing hostapd
by verifying that the require address parameter is available in
the event before processing it.
2010-10-22 17:43:23 +03:00
Jouni Malinen
450eddcfae hostapd: Add wps_config ctrl_interface command for configuring AP
This command can be used to configure the AP using the internal
WPS registrar. It works in the same way as new AP settings received
from an ER.
2010-10-21 16:49:41 +03:00
Jouni Malinen
cbbf4a1cc3 WPS: Fix a compiler warning in hostapd_wps_update_ie() 2010-10-20 13:35:55 +03:00
Jouni Malinen
2c8a4eef41 WPS: Update Beacon/ProbeResp IE on wps_version_number changes
This test command is supposed to change the WPS version number in all
places immediately, so make sure that the IEs used in management
frames get updated immediately.
2010-10-19 19:57:01 +03:00
Jouni Malinen
3f4ce13fde P2P: Track non-P2P members in the group and set Group Limit bit
The P2P group component is now tracking of associated stations
in the group and the Group Limit bit in the Group Capabilities
is updated based on whether there is room for new clients in
the group.
2010-10-19 18:10:28 +03:00
Anil Gathala Sudha
a0dee79709 P2P: Send AP mode WPS-FAIL event to parent interface
The AP operation with wpa_supplicant requires an additional callback
to get the needed event information from hostapd side so that
wpa_msg() can be called for wpa_s->parent if needed.
2010-10-14 20:57:00 +03:00
Jouni Malinen
fc215bfe86 WPS: Add WPS-FAIL ctrl_interface event for hostapd 2010-10-14 20:50:46 +03:00
Jouni Malinen
4e698e5c30 WPS: Fix WPS commands in wpa_supplicant AP mode
Commit 9290cc1800 broke this by moving
to use for_each_interface() which is not available in wpa_supplicant
AP mode.
2010-10-10 17:43:42 +03:00
Jouni Malinen
dce044cce5 P2P: Extend P2P manager functionality to work with driver MLME
Add P2P IE into Beacon, Probe Response, and (Re)Association Request
frames for drivers that generate this frames internally.
2010-10-08 18:16:07 +03:00
Jouni Malinen
2f7d9f2dd9 Apply WPS configuration changes to all interfaces that use WPS
When a single hostapd process is controlling multiple interfaces,
apply the received or auto-generated configuration changes to all
interfaces that have enabled WPS.
2010-10-08 17:32:10 +03:00
Jouni Malinen
e55f98f4b8 Disable AP PIN on all interfaces controlled by the same process
When a single hostapd process is used to manage multiple interfaces,
disable AP PIN on all interfaces if an attack is detected on any
interface.
2010-10-08 17:24:58 +03:00
Jouni Malinen
9290cc1800 Apply hostapd WPS commands to all interfaces on concurrent APs
When the same hostapd process is controlling multiple interfaces,
apply WPS commands (push button, add PIN, change AP PIN) to all
interfaces that are configured to use WPS.
2010-10-08 17:15:16 +03:00
Jouni Malinen
0314e26a61 Fix wpa_supplicant AP mode with WPS not to crash
Commit 3379a3a795 added a direct
iface->for_each_interface use without verification whether the
function is available. This works with hostapd, but not
wpa_supplicant (which crashes on segfault).
2010-10-06 16:46:43 +03:00
Jouni Malinen
416192628d Fix AP mode 40 MHz pri/sec channel parsing in overlap determination
The previous implementation ended up incorrectly assuming that all
40 MHz use cases have secondary channel above the primary one. Fix this
by properly masking the secondary channel offset field and checking its
value.
2010-10-06 14:09:44 +03:00
Jouni Malinen
fa37511fa7 WPS: Fix hostapd reconfig to update WPS UPnP string pointers
This is needed to update the pointers maintained within WPS code
to use the new configuration data instead of maintaining pointers
to the old configuration which will be freed. This fixes strings in
UPnP discovery after reconfig (they used to be random freed memory..).
2010-09-22 19:34:32 -07:00
Jouni Malinen
70153d385c hostapd: Add virt/phy flag for Display/PushButton if needed (WPS 2.0)
This seems to be the easiest way of making sure the Config Methods
value is compliant with the WSC 2.0 specification without having
to modify the configuration file. However, this will only add the
virtual flag, so the configuration files should really be updated
to specify values that match the AP design.
2010-09-22 17:45:43 -07:00
Jouni Malinen
0e2e565a44 WPS 2.0: Provide (Re)Association Response WPS IE to driver
WPS 2.0 mandates the AP to include WPS IE in (Re)Association Response
if the matching (Re)Association Request included WPS IE. Provide the
needed WPS IE information to the driver_ops API for drivers that
process association frames internally.

Note: This modifies the driver_ops API by adding a new argument to
set_ap_wps_ie().
2010-09-22 10:46:44 -07:00
Jouni Malinen
baf7081ccd WPS: Add MAC address to validation error message for Probe Request
This makes it easier to figure out which device is sending invalid
Probe Request frames.
2010-09-22 10:07:20 -07:00
Jouni Malinen
3379a3a795 WPS: Fix Beacon WPS IE on concurrent dualband AP in PBC mode
The Beacon frame must include UUID-E and RF Bands attributes when
in active PBC mode to allow stations to figure out that two BSSes in
PBC mode is not a PBC session overlap.
2010-09-20 15:32:29 -07:00
Jouni Malinen
e0369e3664 WPS: Use same UUID in multi-interface case
When generating the UUID based on MAC address, share the same UUID
with all interfaces. This fixes a potential issue with concurrent
dualband APs where the UUID needs to be same for PBC to work properly.
2010-09-20 14:28:43 -07:00
Dan Harkins
df684d82ff EAP-pwd: Add support for EAP-pwd server and peer functionality
This adds an initial EAP-pwd (RFC 5931) implementation. For now,
this requires OpenSSL.
2010-09-14 21:51:40 -10:00
Jouni Malinen
812bf56ab1 Fix build without CONFIG_P2P=y 2010-09-09 07:20:28 -07:00
Jouni Malinen
5548ddc217 P2P: Allow P2P IE without Device Info in (Re)Assoc Req
This can happen, e.g., when a P2P client connects to a P2P group
using the infrastructure WLAN interface instead of P2P group
interface. In that case, the P2P client may behave as if the GO
would be a P2P Manager WLAN AP.
2010-09-09 07:17:21 -07:00
Jouni Malinen
6c6915f3db P2P: Add defined values for P2P Manageability Bitmap 2010-09-09 07:17:20 -07:00
Jouni Malinen
aefb53bd5d P2P: Disable periodic NoA when non-P2P STA is connected
For now, this applies to the test command that can be used to set
periodic NoA (p2p_set noa). The value are stored and periodic NoA
is enabled whenever there are no non-P2P STAs connected to the GO.
2010-09-09 07:17:20 -07:00
Jouni Malinen
962473c136 P2P: Add preliminary P2P Manager AP support for hostapd 2010-09-09 07:17:18 -07:00
Jouni Malinen
ef7963917c P2P: Add group notification from (re)association request 2010-09-09 07:17:18 -07:00
Jouni Malinen
f684e608af P2P: Use PSK format in WPS Credential 2010-09-09 07:17:17 -07:00
Jouni Malinen
8ccbe415ba P2P: Add group notifications 2010-09-09 07:17:17 -07:00
Jouni Malinen
e44f8bf20a P2P: Add P2P configuration and callbacks in hostapd code 2010-09-09 07:17:17 -07:00
Jouni Malinen
b22128efdc P2P: Add initial version of P2P Module 2010-09-09 07:17:17 -07:00
Jouni Malinen
c2af2afb3b P2P: Preparations for adding P2P IE into Beacon/Probe Response frames 2010-09-09 07:17:17 -07:00
Jouni Malinen
b305c684b8 P2P: Save a copy of P2P IE(s) data from (Re)Association Request 2010-09-09 07:17:17 -07:00
Jouni Malinen
62281bc690 P2P: Do no process Probe Request with P2P wildcard SSID in WPS
The Probe Request frames used in P2P Device Discovery should not be
processed by the WPS implementation.
2010-09-09 07:17:16 -07:00
Jouni Malinen
54f489be45 WPS 2.0: Validate WPS attributes in management frames and WSC messages
If CONFIG_WPS_STRICT is set, validate WPS IE(s) in management frames and
reject the frames if any of the mandatory attributes is missing or if an
included attribute uses an invalid value. In addition, verify that all
mandatory attributes are included and have valid values in the WSC
messages.
2010-09-09 06:07:48 -07:00
Jouni Malinen
dcc4d8be75 WPS 2.0: Disable WPS workarounds if CONFIG_WPS_STRICT is defined 2010-09-09 06:07:47 -07:00
Jouni Malinen
31fcea931d WPS 2.0: Add support for AuthorizedMACs attribute
Advertize list of authorized enrollee MAC addresses in Beacon and
Probe Response frames and use these when selecting the AP. In order
to provide the list, the enrollee MAC address should be specified
whenever adding a new PIN. In addition, add UUID-R into
SetSelectedRegistrar action to make it potentially easier for an AP
to figure out which ER sent the action should there be multiple ERs
using the same IP address.
2010-09-09 06:07:47 -07:00
Jouni Malinen
a0fad21014 Indicate Barker Preamble Mode in ERP IE also based on local configuration
While this is not strictly speaking required based on dynamic
configuration (i.e., dot11ShortPreambleOptionImplemented is static
value based on implementation, not runtime configuration), it is better
to follow local configuration parameter for short preamble in addition
to the associated station capabilities.
2010-09-05 13:11:42 +03:00
Jouni Malinen
8421e95c71 Fix segfault in hostapd_eid_ht_capabilities() with some drivers
This function is not really needed in case of drivers that build the
HT IEs internally. However, since this can get called if ieee80211n=1
is set in hostapd.conf, we better not segfault even if the driver
does not provide hw info (hapd->iface->current_mode == NULL).
2010-09-05 12:47:16 +03:00
Jouni Malinen
0caf077bc1 WPS: Fix hostapd build without CONFIG_WPS_UPNP
Commit 5a1cc30f1a added code that was
assuming CONFIG_WPS_UPNP is enabled whenever CONFIG_WPS is. Fix this
by making the UPnP calls conditional on CONFIG_WPS_UPNP define.
2010-09-05 12:34:04 +03:00
Helmut Schaa
36af1c7d31 hostapd: enable STBC only for STBC capable STAs
hostapd simply used its own STBC configuration in the STA's HT caps. This
resulted in TX STBC being used for STAs not supporting RX STBC, which in
turn resulted in the STA not receiving anything.

Fix this by handling the STBC flags in the same way mac80211 does. Mask
out RX STBC if we don't support TX STBC and vice versa.

Tested only with the nl80211 driver and a STBC incapable STA.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2010-08-28 12:25:44 +03:00
Jouni Malinen
31fa4c6d98 Remove unused ieee802_11_send_deauth() 2010-08-25 21:18:54 +03:00
Jouni Malinen
5a1cc30f1a WPS: Add support for dynamic AP PIN management
A new hostapd_cli command, wps_ap_pin, can now be used to manage
AP PIN at runtime. This can be used to generate a random AP PIN and
to only enable the AP PIN for short period (e.g., based on user
action on the AP device). Use of random AP PIN that is only enabled
for short duration is highly recommended to avoid security issues
with a static AP PIN.
2010-08-24 16:35:37 +03:00
Jouni Malinen
944814106e WPS: Do not disable AP PIN permanently, only slow down attacks
As a compromise between usability and security, do not disable
AP PIN permanently based on failed PIN validations. Instead, go to
AP Setup Locked state for increasing amount of time between each
failure to slow down brute force attacks against the AP PIN.

This avoids problems with some external Registrars that may try
to use the same PIN multiple times without user input. Now, the
user will still be able to fix the PIN and try again later while
a real attack is delayed enough to make it impractical.
2010-08-24 15:24:05 +03:00
Jouni Malinen
43dd46b3bc Fix memory leak in AP WEP key configuration 2010-08-17 21:04:07 +03:00
Jouni Malinen
6195adda9b WPS: Allow AP to start in Enrollee mode without AP PIN for probing
In theory, this should not really be needed, but Windows 7 uses
Registrar mode to probe AP's WPS capabilities before trying to use
Enrollee and fails if the AP does not allow that probing to happen.
This allows the AP to start as an Enrollee and send M1, but refuse
to continue beyond that (M3 will not be sent if AP PIN is not known).
2010-07-26 18:12:08 -07:00
Jouni Malinen
67ccef7e6c FT: Send RRB data directly when managed by same hostapd process
This makes it easier (and a bit faster) to handle multiple local
radios with FT. There is no need to depend on l2_packet in that
case since the frame can be delivered as a direct function call.
2010-07-25 20:30:12 -07:00
Jouni Malinen
7f6ec672ea EAP server: Add support for configuring fragment size 2010-07-20 22:56:10 -07:00
Jouni Malinen
4e22adb4d1 WPS: Move from WLAN_STA_MAYBE_WPS to WLAN_STA_WPS based on EAP messages
If the station does not include WSC IE in Association Request, it
is marked with WLAN_STA_MAYBE_WPS flag. We can update that to
WLAN_STA_WPS if the station uses either of the WPS identity strings.
This enables some workarounds for WPS stations.
2010-07-18 16:10:08 -07:00
Jouni Malinen
3239706303 WPS: Force disconnection after provisioning step
This works around some problems where the station is unable to disconnect
for some reason (e.g., if EAP-Failure gets dropped).
2010-07-18 16:08:52 -07:00
Jouni Malinen
e9501a07c6 FT: Fix RRB messages to use correct endianness
The pairwise cipher field is supposed to be little endian, but the
message building functions did not swap the bytes on big endian
hosts while the message processing functions did. Fix this by using
little endian byte order in both places.
2010-07-17 17:48:32 -07:00
Jouni Malinen
2d8bf73298 Add new debug message level for excessive information
Some frequent debug prints are of limited use and make debug output
difficult to read. Make them use a new debug level so that -dd
provides more readable output (-ddd can now be used to enable
the excessive debug prints).
2010-07-05 12:21:48 -07:00
Jouni Malinen
9776475fb9 WPS: Do not proxy Probe Request frames to foreign SSIDs to Registrars
We must only indicate stations that are either probing the wildcard SSID
or our own SSID.
2010-06-10 22:36:34 -07:00
Jouni Malinen
84b2f9909f Fix driver operation order in configuration reloading
Some of the driver wrappers need to get set_ieee8021x() call before
they can configure keys. Reorder the operations in the reloading
of configuration case to match with that expectation.
2010-05-29 22:27:27 +03:00
Jouni Malinen
ed7a09f914 Add WPS IE into (Re)Association Response frame if WPS is used
If the associating station indicates that it is intents to use WPS
by including WPS IE in (Re)Association Request frame, include WPS IE
in (Re)Association Response frame.
2010-05-26 18:46:08 +03:00
Jouni Malinen
16e46ec043 Reassemble WPS IE(s) in (Re)Association Request if needed
Use a function that will take care of possible (though, very unlikely)
fragmentation of WPS TLVs in (Re)Association Request frames.
2010-05-26 18:17:13 +03:00
Andriy Tkachuk
6deb41e73f Update WPS IE on hostapd reconfiguration
This is needed to handle cases where WPS state may have changed and
hostapd is reloading its configuration.
2010-05-02 11:21:19 +03:00
Jouni Malinen
1bc774a12a hostapd: Reorder some IEs to get closer to IEEE 802.11 standard
Vendor-specific IEs are supposed to be in the end of the frame, so move
WMM into the end of Beacon, Probe Response, and (Re)Association Response
frames. In addition, move HT IEs to be later in (Re)Association
Response to match the correct order.

hostapd_eid_wpa() adds multiple IEs and the end result may not always be
correct. If WPA is enabled, WPA IE (vendor-specific) gets added in the
middle of the frame and not in the end. This would require a larger
change to spliut the IEs from WPA module into separate locations when
constructing Beacon and Probe Response frames. This is not yet addressed.
2010-05-02 10:53:01 +03:00
Jouni Malinen
439d4bf960 Fix EAPOL_SM_USES_WPA flag to be set correctly
Commit c02d52b405 removed direct calls
to the WPA authenticator, but the change here was incorrect.
EAPOL_SM_USES_WPA was supposed to be set based on sta->wpa_sm being
set, i.e., no need to check for PMKSA entries for that.

While this could potentially change EAPOL Key TX state machine behavior,
no clear problems have been identified so far. Anyway, better fix this
to get the correct flags set for EAPOL authenticator state machine.
2010-05-01 17:12:59 +03:00
Jouni Malinen
3ab72b626b Fix WPA state machine initialization on WPA_REAUTH if needed
When using WPS, we may end up here if the STA manages to re-associate
without the previous STA entry getting removed. Consequently, we need to
make sure that the WPA state machines gets initialized properly at this
point.
2010-04-23 16:49:50 +03:00
Jouni Malinen
2de5a860a3 Fix build without CONFIG_FULL_DYNAMIC_VLAN 2010-04-17 21:01:35 +03:00
Jouni Malinen
7992b07f6a Remove unnecessary SUBDIRS loops from src/*/Makefile
There are no subdirectories in any of these directories or plans
for adding ones. As such, there is no point in running the loop
that does not do anything and can cause problems with some shells.
2010-04-17 17:10:31 +03:00
Jouni Malinen
e34ce1683c VLAN: Reorder init to get same behavior for all VLAN interfaces
Both the wildcard VLAN entry and the statically configured VLAN
interfaces should behave in the same way. Initializing the
full dynamic VLAN code before adding the statically configured VLAN
interfaces allows the same processing to be applied to both statically
and dynamically added VLAN interface (i.e., also the statically
configured ones will be added to a bridge).
2010-04-17 09:48:27 +03:00
Jouni Malinen
0249c988bb VLAN: Set statically configured VLAN interfaces up
This is needed to be able to bind stations to them with mac80211.
2010-04-17 09:45:18 +03:00
Jouni Malinen
b9c3e576cb VLAN: Fix bridge interface clean up for no tagged_interface case 2010-04-16 01:13:46 +03:00
M. Braun
20e2cb0ae0 VLAN: Decrease bridge forwarding delay to avoid EAPOL timeouts 2010-04-16 00:48:32 +03:00
M. Braun
37ba0928d5 VLAN: Set dynamic VLAN up to fix STA bind and key setup 2010-04-15 23:54:41 +03:00
Jouni Malinen
4254100d6c Stop processing if STA VLAN bind fails 2010-04-15 23:44:10 +03:00
Jouni Malinen
91faf6b948 VLAN: Clean up debug code and error messages 2010-04-15 20:35:51 +03:00
Jouni Malinen
c47cf42e4b WPS: Fix association when both WPS and WPA/RSN IE are included
The WPS IE was overriding the WPA/RSN IE in driver based MLME case
(hostapd_notif_assoc), but the MLME code here was not using WPS IE
correctly, i.e., it allowed the WPA/RSN IE override the operation.
2010-04-15 12:55:34 +03:00
Jouni Malinen
843123590a Fix hostapd build without WPS 2010-04-12 15:15:17 +03:00
Jouni Malinen
c706d5aa17 Add wpa_supplicant AP mode events for Public Action frames 2010-04-11 20:33:33 +03:00
Jouni Malinen
195420b8d1 Add WPS Registrar success callback 2010-04-11 20:21:08 +03:00
Jouni Malinen
b3db190fa2 Started to make set_ap_wps_ie() capable of adding multiple IEs
This mechanism can be used to add various IEs to Beacon and Probe
Response frames and it should be made clear that it is not reserved
only for WPS IE.
2010-04-11 20:16:43 +03:00
Jouni Malinen
f3585c8a85 Simplify driver_ops for virtual interface add/remove
There is no absolute requirement for separating address allocation
into separate functions, so simplify the driver wrapper interface
to use just if_add and if_remove instead of adding the new
alloc_interface_addr() and release_interface_addr() functions.

if_add() can now indicate if the driver forced a different interface
name or address on the virtual interface.
2010-04-11 19:23:09 +03:00
Yogesh Ashok Powar
721abef9b3 Allow advertising of U-APSD functionality in Beacon
hostapd does not implement UAPSD functionality. However, if U-APSD
functionality is implemented outside hostapd, add support to advertise
the functionality in beacon.

Signed-off-by: yogeshp@marvell.com
2010-04-11 11:32:15 +03:00
Jouni Malinen
0f857f43df FT: Validate MDIE and FTIE in FT 4-way handshake message 2/4 2010-04-10 22:40:35 +03:00
Jouni Malinen
86dfabb809 FT: Add FTIE, TIE[ReassocDeadline], TIE[KeyLifetime] to EAPOL-Key 3/4
These are mandatory IEs to be included in the FT 4-Way Handshake
Message 3.
2010-04-10 21:42:54 +03:00
Jouni Malinen
1566ec4685 Parse EAPOL-Key msg 2/4 Key Data IEs/KDEs before checking RSN/WPA IE
This is needed to avoid incorrect validation errors on RSN/WPA IE
when using FT since there may be more than a single IE in the
Key Data field.
2010-04-10 16:46:17 +03:00
Jouni Malinen
0ae145cde8 FT: Validate FTIE fields in Reassociation Request
ANonce, SNonce, R0KH-ID, and R1KH-ID must match with the values
used in the previous FT authentication sequence message per
IEEE Std 802.11r-2008, 11A.8.4.
2010-04-09 17:14:27 +03:00
Jouni Malinen
8aaf894de2 FT: Validate protect IE count in FTIE MIC Control 2010-04-09 17:08:16 +03:00
Jouni Malinen
6e80516ab9 FT: Fix Reassociation Response in FT Protocol to include ANonce/SNonce
These values are required to be included in the frame per
IEEE Std 802.11r-2008, 11A.8.5.
2010-04-09 13:36:06 +03:00
Jouni Malinen
1f6e69e07b FT: Do not add MIC to FTIE during initial MD association
We do not have any keys set at this point so there is no point in
adding the MIC. In addition, IEEE Std 802.11r-2008, 11A.4.2
describes this frame to have MIC IE count of 0 and MIC of 0.
2010-04-09 13:30:49 +03:00
Jouni Malinen
39eb4d0877 FT: Fix GTK subelement format in FTIE
The Key Info field was changed from 1-octet field to 2-octet field
in 802.11r/D7.0, but that had not been updated in the implementation.
2010-04-07 23:57:39 +03:00
Jouni Malinen
26e23750b9 FT: Fix FT 4-Way Handshake to include PMKR1Name in messages 2 and 3
IEEE Std 802.11r-2008, 11A.4.2 describes FT initial mobility domain
association in an RSN to include PMKR1Name in the PMKID-List field
in RSN IE in messages 2/4 and 3/4. This makes the RSN IE not be
bitwise identical with the values used in Beacon, Probe Response,
(Re)association Request frames.

The previous versions of wpa_supplicant and hostapd did not add the
PMKR1Name value in EAPOL-Key frame and did not accept it if added
(due to bitwise comparison of RSN IEs). This commit fixes the
implementation to be compliant with the standard by adding the
PMKR1Name value into EAPOL-Key messages during FT 4-Way Handshake and
by verifying that the received value matches with the value derived
locally.

This breaks interoperability with previous wpa_supplicant/hostapd
versions.
2010-04-07 21:04:13 +03:00
Jouni Malinen
738a1cb286 FT: Do not include RSN IE in (Re)Assoc Resp during initial MD association
RSN IE is only supposed to be included in Reassociation Response frames
and only when they are part of a fast BSS transition.
2010-04-07 17:27:46 +03:00
Gregory Detal
bb437f282b AP: Add wpa_msg() events for EAP server state machine 2010-04-07 11:13:14 +03:00
Jouni Malinen
68532a9ceb Avoid hostapd segfault on invalid driver association event
Running hostapd and wpa_supplicant on the same interface at the same
time is not expected to work, but it should not cause hostapd to crash.
Ignore station mode association events (no addr field) to avoid this.
2010-04-07 10:01:49 +03:00
Andriy Tkachuk
99f4ae67b7 Fix WPA/RSN IE update on reconfig with set_generic_elem()
IF WPA/RSN parameters were changed or WPA/RSN was disabled, the
WPA/RSN IE in Beacon/Probe Response frames was only update with
set_beacon(). We need to do this with set_generic_elem(), too, to
work with all driver wrappers.
2010-04-06 20:44:26 +03:00
Jouni Malinen
643743e215 WPS: Fix WPS IE update in Beacon frames for nl80211
Call ieee802_11_set_beacon() in addition to set_ap_wps_ie() when
processing WPS IE updates. This is needed with drivers that use
set_beacon() instead of set_ap_wps_ie() (i.e., nl80211).
2010-04-06 18:04:30 +03:00
Jouni Malinen
81a658d754 FT: Re-set PTK on reassociation
It turns out that this is needed for both FT-over-DS and FT-over-air
when using mac80211, so it looks easiest to just unconditionally
re-configure the keys after reassociation when FT is used.
2010-04-04 09:34:14 +03:00
Jouni Malinen
2220821113 FT: Use bridge interface (if set) for RRB connection
This fixes receiving of RRB messages between FT APs
2010-04-04 09:31:13 +03:00
Jouni Malinen
21c9b6903e FT: Set WLAN_AUTH_FT auth_alg on FT-over-DS case
This is needed to allow reassociation processing to skip 4-way handshake
when FT-over-DS is used with an AP that has a previous association state
with the STA.
2010-04-04 09:17:57 +03:00
Jouni Malinen
d8ad6cb966 FT: Force key configuration after association in FT-over-DS
This seems to be needed at least with mac80211 when a STA is using
FT-over-DS to reassociate back to the AP when the AP still has the
previous association state.
2010-04-04 09:16:11 +03:00
Jouni Malinen
9a3cb18d74 Add AP-STA-DISCONNECT event for driver-based MLME 2010-04-04 08:14:22 +03:00
Jouni Malinen
c41a1095b5 Allow hostapd_notif_assoc() to be called with all IEs
This makes the call simpler for driver wrappers since there is no need
to parse the IEs anymore before indicating association. In addition,
this allows association processing to be extended to use other IEs
in the future.
2010-04-04 08:14:18 +03:00
Jouni Malinen
0823031750 Fix Windows compilation issues with AP mode code 2010-04-04 08:14:14 +03:00
Jouni Malinen
7b1080dadd MFP: Fix IGTK PN in group rekeying
IGTK get_seqnum needs to be skipped in the same way as GTK one when
rekeying group keys. Previously, the old PN value (the one from the
previous key) was indicated and that resulted in MMIE replay detection
at the station.
2010-03-29 22:57:10 -07:00
Jouni Malinen
358c3691cf MFP: Add SA Query Request processing in AP mode 2010-03-29 14:05:25 -07:00
Jouni Malinen
a042f8447d Fix ctrl_iface get-STA-MIB for WPS disabled case
The previous version would crash here on NULL pointer dereference if
WPS was disabled.
2010-03-29 09:59:16 -07:00
Jouni Malinen
03bcb0af0d Fix wpa_auth_iface_iter() to skip BSSes without Authenticator
This could cause NULL pointer deference if multi-BSS configuration
was used with OKC in some cases.
2010-03-26 23:26:24 -07:00
Jouni Malinen
ef580012d1 FT: Fix Authorized flag setting for FT protocol
4-way handshake or EAPOL is not used in this case, so we must
force Authorized flag to be set at the conclusion of successful
FT protocol run.
2010-03-13 21:43:00 +02:00
Jouni Malinen
0e84c25434 FT: Fix PTK configuration in authenticator
Must update sm->pairwise when fetching PMK-R1 SA.
Add a workaround for drivers that cannot set keys before association
(e.g., cfg80211/mac80211): retry PTK configuration after association.
2010-03-13 21:11:26 +02:00
Jouni Malinen
1b484d60e5 FT: Include pairwise cipher suite in PMK-R0 SA and PMK-R1 SA
This is needed to fix PTK derivation to use correct length. Previously,
64-octet PTK may have been derived if the authenticator did not already
have a STA entry. Now, the correct pairwise cipher suite is learned when
then PMK-R1 SA is received.
2010-03-07 22:18:33 +02:00
Jouni Malinen
0ebdf62735 Remove unnecessary ifname parameter from set_ap_wps_ie() driver op 2010-03-07 11:51:50 +02:00
Jouni Malinen
d3e3a20565 Remove unnecessary ifname parameter from set_ht_params() driver op 2010-03-07 11:49:27 +02:00
Jouni Malinen
3234cba40e Remove unnecessary ifname parameter to sta_set_flags() driver op 2010-03-07 11:45:41 +02:00
Jouni Malinen
62847751e4 Remove unnecessary ifname parameter from sta_add() driver op 2010-03-07 11:42:41 +02:00
Jouni Malinen
8709de1ae8 Remove unnecessary ifname parameter from hapd_get_ssid/hapd_set_ssid 2010-03-07 11:36:45 +02:00
Jouni Malinen
aa48451698 Remove unnecessary ifname parameter from set_generic_elem() driver op 2010-03-07 11:33:06 +02:00
Jouni Malinen
d5dd016a8a Remove unneeded ifname parameter from set_privacy() driver op 2010-03-07 11:29:17 +02:00
Jouni Malinen
70a8419f26 Avoid crash after driver init failure
hostapd_flush_old_stations() needs to check whether the driver
initialization was successful since it gets called on an error path.
2010-03-07 11:25:28 +02:00
Jouni Malinen
7ab68865c0 Remove unneeded iface parameter from if_add() driver op 2010-03-07 10:05:05 +02:00
Jouni Malinen
8b897f5a17 Remove unnecessary ifname parameter from set_beacon()
The new per-BSS driver context makes this unnecessary.
2010-03-06 22:36:40 +02:00
Felix Fietkau
53f3d6f3e6 hostapd: allow stations to move between different bss interfaces
With this patch, a client gets kicked out of the last BSS it was
attached to, when it is associating to a different one.
While mac80211 does allow a station to be present on multiple bss
interfaces, this does seem to cause problems both for the stack
and for hostapd.
2010-03-06 22:30:25 +02:00
Felix Fietkau
a2e40bb650 hostapd: Fix interface selection for the nl80211 driver
This patch allows the nl80211 driver to create its own per-bss context
and pass it to the drv_priv pointer of the hostapd bss state.
With this and the following patch, stations can associate to and switch
between multiple BSS interfaces of a single wiphy.
This obsoletes a few instances of passing ifname to a callback, those
can be removed in a separate patch.
It might also be useful to move more fields from the driver data to the
per-bss data structure in the future.
2010-03-06 22:22:56 +02:00
Felix Fietkau
39f42d1193 hostapd: fix bogus nl80211 interface remove messages for STA WDS 2010-03-06 20:52:22 +02:00
Felix Fietkau
4c32757d22 hostapd: add ifname to the sta_set_flags callback
This fixes multi-BSS STA operations (e.g., setting AUTHORIZED flag) with
nl80211-based drivers.
2010-03-06 20:44:31 +02:00
Jouni Malinen
6fa2ec2d2b Make EAPOL Authenticator buildable with Microsoft compiler 2010-02-19 18:35:40 +02:00
Christian Lamparter
43a7fe2e0e ap: Reorder authsrv_init() to fix IEEE 802.1X initialization
This patch moves the authentication server setup before
IEEE 802.1X initialization. It's because 802.1X already
needs to have a valid SSL context.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
2010-01-17 12:14:17 +02:00
Jouni Malinen
6f9b5d1696 IBSS RSN: Check explicitly that WPA auth sm assoc call succeeded
Verify that association processing did not end up freeing the state
machine. This should not really happen in practice, but better verify
it anyway.
2010-01-10 21:45:44 +02:00
Jouni Malinen
e4a6ea1d9c Avoid a theoretical use-after-free in WPA auth sm init
wpa_sm_step() could theoretically free the statemachine, but it does
not do it in this particular case. Anyway, the code can be cleaned to
verify whether the state machine data is still available after the
wpa_sm_step() call.
2010-01-10 18:54:41 +02:00
Jouni Malinen
1ce77dcc66 Fix memory leak on RSN preauth init error path 2010-01-06 21:14:09 +02:00
Lennert Buytenhek
594cf8b9ef Fix WMM default parameters
wmm_ac_??_cw{min,max} parameters are in log form

When the wme_ac_??_cw{min,max} parameters aren't specified in
hostapd.conf, hostapd uses an incorrect set of default values, as the
defaults are in 2^x-1 form instead of in log form.  This patch changes
them over to the expected log form.
2010-01-06 20:48:29 +02:00
Jouni Malinen
70f8cc8ec8 Share the same enum for MFP configuration
The three existing enums were already depending on using the same
values in couple of places and it is just simpler to standardize on
one of these to avoid need for mapping between different enums for
the exact same thing.
2010-01-03 21:02:51 +02:00
Jouni Malinen
d1f9c410c1 Remove src/drivers/scan_helpers.c
Most of this file was already moved into wpa_supplicant/scan.c and
we can remove the file completely by having couple of small helper
functions copied to the remaining users outside core wpa_supplicant
code.
2010-01-03 20:27:32 +02:00
Jouni Malinen
1d041bec84 Use generic driver event notification for AP mode assoc/disassoc 2010-01-03 18:22:22 +02:00
Jouni Malinen
a8e0505bf0 Use driver event, EVENT_EAPOL_RX, for EAPOL frame indication 2010-01-03 17:44:40 +02:00
Jouni Malinen
a70a5d6d06 Replace hostapd_notif_new_sta() with new driver event, EVENT_NEW_STA 2010-01-03 16:46:18 +02:00
Jouni Malinen
9646a8ab8b Remove unnecessary wpa_event_type typedef 2010-01-03 13:10:12 +02:00
Jouni Malinen
2a8b74163e Move struct hostapd_frame_info definition away from driver API
This is internal data structure for hostapd/AP functionality and does
not need to be defined in driver.h.
2010-01-03 12:37:02 +02:00
Jouni Malinen
0d9fc3d8bd Remove struct ieee80211_hdr dependency from EVENT_RX_FROM_UNKNOWN
It is simpler to just pass in u8* to the beginning of the header.
2010-01-03 12:17:20 +02:00
Jouni Malinen
a0e0d3bb15 Replace hostapd_probe_req_rx() with EVENT_RX_PROBE_REQ driver event 2010-01-03 12:11:44 +02:00
Jouni Malinen
c2f5126941 WPS: Add Enrollee-seen event message and wpa_gui-qt4 Peers entry
This can be used to show active Enrollees in AP mode to make it
easier to provision a new device.
2009-12-28 16:24:04 +02:00
Jouni Malinen
cd7d80f373 Allow Probe Request callbacks to terminate iteration 2009-12-28 13:14:58 +02:00
Jouni Malinen
1c08f8c0f0 Allocate Probe Response and Beacon buffers based on WPS IE length
This IE is of variable length and it is better to allocate the frame
buffer taking this length into account to prepare for future
additions.
2009-12-28 12:58:27 +02:00
Jouni Malinen
f7c4783379 Split hostapd_interface_deinit() into deinit and free parts
This allows the driver interface to be deinitialized before
struct hostapd_data instance gets freed. This needs to be done so
that the driver wrapper does not maintain a context pointer to
freed memory.
2009-12-27 21:31:13 +02:00
Jouni Malinen
719347511a Get rid of unnecessary typedefs for enums. 2009-12-26 10:35:08 +02:00
Jouni Malinen
81f4f6195e Include header files explicitly in *.c, not via header files 2009-12-26 00:31:51 +02:00
Jouni Malinen
6e6e8c31ff Replace src/ap/driver_i.h with non-inlined functions in ap_drv_ops.c 2009-12-26 00:21:22 +02:00
Jouni Malinen
8b06c1ed0d Remove ap_config.h dependency from driver_i.h
This adds explicit #include line for ap_config.h into the src/ap/*.c
files that actually use the definitions from there.
2009-12-26 00:12:25 +02:00
Jouni Malinen
6226e38d00 Rename some src/ap files to avoid duplicate file names
Doxygen and some build tools may get a bit confused about same file
name being used in different directories. Clean this up a bit by
renaming some of the duplicated file names in src/ap.
2009-12-26 00:05:40 +02:00
Jouni Malinen
1b56c26c40 Get rid of direct hostapd_for_each_interface() calls
src/ap/*.c must not call functions in hostapd or wpa_supplicant
directories directly, so avoid this by using a callback function
pointer.
2009-12-25 20:12:26 +02:00
Jouni Malinen
70db2ab308 Move rest of the generic AP mode functionality into src/ap 2009-12-25 20:06:07 +02:00
Jouni Malinen
a4f2110934 Clean up some of the hostapd.h function prototype definitions
Not all prototypes in hostapd.h really belong there. This is an initial
step in cleaning that up.
2009-12-25 14:20:35 +02:00
Jouni Malinen
0aef3ec832 Move hostapd_prune_associations() into ap/utils.c 2009-12-25 14:06:26 +02:00
Jouni Malinen
2586bc64d0 Move authentication server setup into separate file 2009-12-25 13:43:43 +02:00
Jouni Malinen
ad44e244b1 Move iapp.c into src/ap 2009-12-25 13:04:45 +02:00
Jouni Malinen
0e2d35c614 Move ctrl_iface_ap.c into src/ap 2009-12-25 12:25:55 +02:00
Jouni Malinen
65668bfb77 Add forgotten src/ap/utils.c file
Commit 32da61d9c9 was supposed to add
this file.
2009-12-25 01:31:28 +02:00
Jouni Malinen
32da61d9c9 Move wps_hostapd.c into src/ap 2009-12-25 01:26:37 +02:00
Jouni Malinen
1057d78eb8 Move generic AP functionality implementation into src/ap
This code can be shared by both hostapd and wpa_supplicant and this
is an initial step in getting the generic code moved to be under the
src directories. Couple of generic files still remain under the
hostapd directory due to direct dependencies to files there. Once the
dependencies have been removed, they will also be moved to the src/ap
directory to allow wpa_supplicant to be built without requiring anything
from the hostapd directory.
2009-12-25 01:12:50 +02:00