Commit graph

1748 commits

Author SHA1 Message Date
Kanchanapally, Vidyullatha
4d916ed6c5 nl80211: Register for only for specific Action frames in AP mode
This makes changes such that hostapd (and wpa_supplicant AP mode)
registers to kernel for specific Action frames instead of generically
registering for all Action frames. This makes it easier for other
programs to register for some Action frames that hostapd does not handle
today without having to somehow coordinate directly with hostapd.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-21 00:07:42 +03:00
Johannes Berg
d58b60da87 drivers: Add NEED_RADIOTAP
If there's ever a driver that, like nl80211, requires radiotap,
we need to have a NEED_RADIOTAP variable to avoid trying to link
the radiotap helpers twice. Introduce that.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2016-05-13 18:29:01 +03:00
Rafał Miłecki
f4830bed66 nl80211: Try running without mgmt frame subscription (driver AP SME)
One of supported code paths already allows this scenario. It is used if
driver doesn't report NL80211_ATTR_DEVICE_AP_SME and doesn't support
monitor interface. In such situation:
1) We don't quit if subscribing for WLAN_FC_STYPE_PROBE_REQ fails
2) We don't try subscribing for WLAN_FC_STYPE_ACTION
3) We fallback to AP SME mode after failing to create monitor interface
4) We don't quit if subscribing for WLAN_FC_STYPE_PROBE_REQ fails
Above scenario is used, e.g., with brcmfmac. As you can see - thanks to
events provided by cfg80211 - it's not really required to receive Probe
Request or action frames.

However, the previous implementation did not allow using hostapd with
drivers that:
1) Report NL80211_ATTR_DEVICE_AP_SME
2) Don't support subscribing for PROBE_REQ and/or ACTION frames
In case of using such a driver hostapd will cancel setup after failing
to subscribe for WLAN_FC_STYPE_ACTION. I noticed it after setting flag
WIPHY_FLAG_HAVE_AP_SME in brcmfmac driver for my experiments.

This patch allows working with such drivers with just a small warning
printed as debug message.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-04-28 20:47:12 +03:00
Jouni Malinen
bd86ea0808 nl80211: Get rid of unused assignment warning
The os_snprintf() call here cannot really fail in practice, but since
its result was stored into the local variable and not checked, static
analyzers could warn about the unused assignment. Clean this up by
checking the return value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-17 18:43:30 +03:00
Roy Marples
18ae3a675c bsd: Set level correctly for non FreeBSD systems
Only FreeBSD treats rssi as dBm, other BSD have no special meaning to
rssi.

Signed-off-by: Roy Marples <roy@marples.name>
2016-04-17 18:34:22 +03:00
Beni Lev
b5d172e578 nl80211: Add support for global RRM flag
Set the global RRM flag if global RRM is supported by the device. Also,
allow RRM in (Re)Association Request frame if the global RRM flag is
set.

Signed-off-by: Beni Lev <beni.lev@intel.com>
2016-04-17 12:41:44 +03:00
Beni Lev
a7f0bb7000 driver: Add global RRM support flag
This flag indicates that RRM can be used in (Re)Association Request
frames, without supporting quiet period.

Signed-off-by: Beni Lev <beni.lev@intel.com>
2016-04-17 12:37:08 +03:00
David Spinadel
864b95225c nl80211: Register to receive Radio Measurement Request frames
Register to receive Radio Measurement Request frames since LCI request
is supported by wpa_supplicant.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-17 12:32:14 +03:00
Ilan Peer
6922d440de nl80211: Implement configure_data_frame_filters() callback
Implement configure_data_frame_filters() callback by using
the net-sysfs interfaces (if these are available).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-04-08 15:21:18 +03:00
Matti Gottlieb
e42adb9a75 driver: Add a packet filtering function declaration
Add a new function declaration that will allow wpa_supplicant to request
the driver to configure data frame filters for specific cases.

Add definitions that will allow frame filtering for stations as
required by Hotspot 2.0:

1. Gratuitous ARP
2. Unsolicited NA
3. Unicast IP packets encrypted with GTK

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
2016-04-08 13:13:55 +03:00
Ayala Beker
ae33239c55 AP: Pass station P2P PS capabilities info during station add/set
If a legacy client with no P2P PS support is trying to connect to
a P2P GO, the driver should know that, and change its PS behavior
accordingly.

Add a parameter to hostapd_sta_add_params() indicating if P2P PS is
supported by the station and pass this parameter to kernel with nl80211
driver when the station is added/set.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
2016-04-08 13:02:49 +03:00
Jouni Malinen
7405bb06ca Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2016-04-06.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-08 13:02:49 +03:00
Jouni Malinen
094e949265 atheros: Do not use struct ieee80211_mgmt::u.probe_req
This struct in the union is empty, but the design of using a zero-length
u8 array here is not fully compatible with C++ and can result in
undesired compiler warnings. Since there are no non-IE fields in the
Probe Request frames, get the location of the variable length IEs simply
by using the pointer to the frame header and the known header length.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-02 16:55:02 +03:00
Jouni Malinen
87faf1f22c nl80211: Fix libnl-tiny build with CONFIG_LIBNL20=y
libnl-tiny does not use the separate nl-genl library.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 12:02:34 +02:00
Jouni Malinen
1126c0787d nl80211: Ignore deauth/disassoc event during Connect reassociation
cfg80211 reports a deauth/disassoc event when internally clearing
connection with the previous BSS. Ignore that event to allow the new
connect command to complete.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-24 22:35:10 +02:00
Jouni Malinen
00c3c4ac9b nl80211: Add NL80211_ATTR_PREV_BSSID with Connect command
This makes it easier for drivers that use the Connect command instead of
separate Auth+Assoc commands to determine when to use reassociation
instead of association. Matching changes are still needed in cfg80211 to
allow this parameter to be used, but it is safe for wpa_supplicant to
start including this attribute now since it will be ignored by older
cfg80211 versions.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-24 22:35:10 +02:00
Jouni Malinen
32d4fe9549 privsep: Fix a compiler warning on unsigned/signed comparison
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-22 17:41:37 +02:00
Roy Marples
45e3fc72c6 Find correct driver for interface additions/removals
Interface additions/removals are not guaranteed to be for the driver
listening to the kernel events. As such, send the events to
wpa_supplicant_event_global() which can then pick the correct interface
registered with wpa_supplicant to send the event to.

Signed-off-by: Roy Marples <roy@marples.name>
2016-03-22 17:41:37 +02:00
Roy Marples
7f46ad9ee5 BSD: Only down the interface once we are sure we can work with it
Signed-off-by: Roy Marples <roy@marples.name>
2016-03-20 11:24:30 +02:00
Jouni Malinen
29eddc3d8c nl80211: Fix error path in if_indices_reason reallocation
Commit 732b1d20ec ('nl80211: Clean up
ifidx properly if interface in a bridge is removed') added
drv->if_indices_reason array similarly to the previously used
drv->if_indices. However, it had a copy-paste error here on the error
path where a reallocation failure after at least one successful
reallocation would result in the drv->if_indices being overridden
instead of restoring drv->if_indices_reason to the old value. Fix this
by setting the correct variable on the error path. (CID 138514)

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-18 16:25:35 +02:00
Jouni Malinen
ee298f1b1f nl80211: Do not add NL80211_ATTR_SMPS_MODE attribute if HT is disabled
SMPS mode is applicable only for HT and including an attribute to
configure it when HT is disabled could result in the AP start operation
failing. Fix this by adding the attribute only in cases where HT is
enabled.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-18 16:16:40 +02:00
Dedy Lansky
f2d6c17aa0 nl80211: Support network hierarchy of a master interface under bridge
Since commit cb05808c46 ('nl80211: Generic
Linux master interface support for hostapd'), hostapd is listening for
EAPOL frames on any master which the interface is enslaved under.

This commit allows hostapd to support network hierarchy in which the
interface is enslaved under some master which in turn is enslaved under
a bridge.

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
2016-03-09 21:03:41 +02:00
Ayala Beker
7441698fcf nl80211: Abort an ongoing scan upon scan timeout indication
Currently, when scan is stuck in the kernel/driver/fw,
the nl80211 driver tries to recover by faking a SCAN_RESULTS flow.
However, the scan is still stuck in the kernel/driver/fw.

To avoid that stuck request, abort it upon scan timeout.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
2016-03-03 17:10:26 +02:00
Jouni Malinen
b9ca12a911 nl80211: Add more address fields into RX frame debug message
This makes it easier to debug issues related to Public Action frame
addressing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-29 21:18:27 +02:00
Michael Braun
732b1d20ec nl80211: Clean up ifidx properly if interface in a bridge is removed
When an interface is removed while it was in a bridge, the bridge was
not removed from the local ifidx list.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-28 19:42:40 +02:00
Jouni Malinen
eb20cea590 nl80211: Add an option to specify the BSSID to scan for
This allows scans to be optimized when a response is needed only from a
single, known BSS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-26 17:19:20 +02:00
Jouni Malinen
a15995819a ndis: Use the new get_ie() helper to avoid duplicated code
This removes more duplicated implementation of finding the first IE
based on the id.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-02-21 17:32:47 +02:00
Avraham Stern
231b04b6cb utils: Share a single helper function to get IE by ID
Add a helper function to find a certain IE inside IEs buffer by ID and
use this function in several places that implemented similar
functionality locally.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2016-02-21 17:14:56 +02:00
Nick Lowe
43022abdb9 Use 64-bit TX/RX byte counters for statistics
If the driver supports 64-bit TX/RX byte counters, use them directly.
The old 32-bit counter extension is maintained for backwards
compatibility with older drivers.

For nl80211 driver interface, the newer NL80211_STA_INFO_RX_BYTES64 and
NL80211_STA_INFO_TX_BYTES64 attributes are used when available. This
resolves the race vulnerable 32-bit value wrap/overflow. Rework RADIUS
accounting to use these for Acct-Input-Octets, Acct-Input-Gigawords,
Acct-Output-Octets, and Acct-Output-Gigawords, these values are often
used for billing purposes.

Signed-off-by: Nick Lowe <nick.lowe@lugatech.com>
2016-02-20 19:03:10 +02:00
Ayala Beker
dc55b6b672 nl80211: Add support for full station state operations
This provides means for determining whether the driver supports full AP
station state and setting the needed STA flags for using this
functionality.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
2016-02-20 18:25:13 +02:00
Roy Marples
640b0b933a ctype functions require an unsigned char
Ensure that characters are represented as unsigned char when using
isblank() and isspace(). These function take in a "int c" argument, but
it needs to be unsigned for the cases where EOF is not indicated.

Signed-off-by: Roy Marples <roy@marples.name>
2016-02-18 17:39:00 +02:00
Roy Marples
a084c24469 wired: Fix compile on NetBSD for wired driver
Shuffle wpa_supplicant includes above system ones so that
to fix a compile problem on NetBSD where if_type #define
conflicts with the wpa_driver_if_type enum.

Signed-off-by: Roy Marples <roy@marples.name>
2016-02-18 17:03:57 +02:00
Jouni Malinen
99a94f5588 nl80211: Avoid wpa_printf %s call with NULL pointer in set_param()
While most C libraries print "(null)" when NULL is used as an argument
to printf format string %s, this is not really necessary to print here,
so move the debug print to be after the NULL check.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-18 11:59:58 +02:00
Jouni Malinen
99a17351c7 rfkill: Fix a memory leak
rfkill_init() uses realpath() which allocates memory and that memory was
not freed on the success path.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-16 00:14:47 +02:00
Lior David
86b5c400a0 nl80211: Basic support for PBSS/PCP
PBSS (Personal Basic Service Set) is a new BSS type for DMG
networks. It is similar to infrastructure BSS, having an AP-like
entity called PCP (PBSS Control Point), but it has few differences.
PBSS support is mandatory for IEEE 802.11ad devices.

Add a pbss flag to the relevant structures to support starting a PCP and
connecting to a PCP. Implement support in the nl80211 driver by using
the new PBSS flag attribute.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-02-08 22:16:04 +02:00
Jouni Malinen
afa453a28a Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2016-01-28.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-02-08 22:12:57 +02:00
Roshan Pius
0ae86f9043 wpa_supplicant: Fix couple of C++ compiler errors with header files
Need to include these headers in C++ files for adding a binder interface
to wpa_supplicant. So, fix the following C++ compiler errors in them:
1. Add explicit C-style casts in wpa_buf.h header.
2. Move the nested definition of wpa_driver_scan_ssid in driver.h
outside of wpa_driver_scan_params because it is used in another
structure below.

Signed-off-by: Roshan Pius <rpius@google.com>
2016-02-06 15:26:48 +02:00
Roy Marples
cb22e3b250 BSD: Zero ifindex on interface removal
If an interface is removed, zero the remembered ifindex.
Don't try to set properties on the interface when it is removed.

Signed-off-by: Roy Marples <roy@marples.name>
2016-02-05 17:40:45 +02:00
Roy Marples
af060932de BSD: Disable interface on down
Instead of removing the interface when downed, disable it. Enable it
when it comes back up again.

Signed-off-by: Roy Marples <roy@marples.name>
2016-02-05 12:37:25 +02:00
Roy Marples
dc0ad60314 BSD: Use correct ifindex from route messages
Use the interface index from the correct structure according to the
message instead of assuming rtm_index is correct.

Signed-off-by: Roy Marples <roy@marples.name>
2016-02-05 12:36:44 +02:00
Roy Marples
5f17b2c60e BSD: __FUNCTION__ -> __func__
Signed-off-by: Roy Marples <roy@marples.name>
2016-02-05 12:29:33 +02:00
Purushottam Kushwaha
e15dcf6d1b nl8021: Avoid potential memory leak on error path
The called function nl80211_ht_vht_overrides() was not freeing "msg"
resource in error cases.

Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
2016-01-15 20:27:38 +02:00
Roy Marples
449a31662d bsd: Optimize socket use
Create global init to handle socket calls and route messages.
Register each interface inside the global driver so that
routing messages can find the interface based on rtm_ifindex.

Signed-off-by: Roy Marples <roy@marples.name>
2016-01-13 00:17:27 +02:00
Rafał Miłecki
4653ceb750 nl80211: Report disassociated STA / lost peer for the correct BSS
We shouldn't use drv->ctx as it always points to the first BSS. When
using FullMAC driver with multi-BSS support it resulted in incorrect
treating nl80211 events. I noticed with with brcmfmac and BCM43602.

Before my change I was getting "disassociated" on a wrong interface:
wlan0-1: STA 78:d6:f0:00:11:22 IEEE 802.11: associated
wlan0-1: STA 78:d6:f0:00:11:22 WPA: pairwise key handshake completed (RSN)
wlan0: STA 78:d6:f0:00:11:22 IEEE 802.11: disassociated

With this patch it works as expected:
wlan0-1: STA 78:d6:f0:00:11:22 IEEE 802.11: associated
wlan0-1: STA 78:d6:f0:00:11:22 WPA: pairwise key handshake completed (RSN)
wlan0-1: STA 78:d6:f0:00:11:22 IEEE 802.11: disassociated

This doesn't apply to hostapd dealing with SoftMAC drivers when handling
AP SME & MLME is done it hostapd not the firmware.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-01-13 00:17:27 +02:00
Jouni Malinen
7d41907bd9 nl80211: Add a missing space to a debug message
The "nl80211: New peer candidate" debug message did not have a space
before the MAC address.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-01-06 13:20:31 +02:00
Ilan Peer
ef3866ab01 nl80211: Don't call linux_iface_up() for a dedicated P2P Device
As a dedicated P2P Device interface does not have a network
interface associated with it, trying to call linux_iface_up()
on it would always fail so this call can be skipped for
such an interface.

Getting interface nlmode can be done only after bss->wdev_id is
set, so move this call to wpa_driver_nl80211_finish_drv_init(),
and do it only in case the nlmode != NL80211_IFTYPE_P2P_DEVICE.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-12-28 17:21:08 +02:00
Johannes Berg
0e92fb8fae rfkill: Match only the correct expected wiphy rfkill
On systems that have multiple WLAN rfkill instances, the rfkill code
can become confused into thinking that the device was unblocked when
in fact it wasn't, because it only matches on the WLAN type.

Since it then stores the new (unblocked) state from the wrong rfkill
instance, it will never retry the failing IFF_UP operation and the
user has to toggle rfkill again, or otherwise intervene manually, in
this case to get back to operational state.

Fix this by using the existing (but unused) ifname argument when the
rfkill instance is created to match to a specific rfkill index only.

As a P2P Device interface does not have a netdev interface associated
with it, use the name of a sibling interface to initialize the rfkill
context for the P2P Device interface. For nl80211, as the wiphy index
is known only after getting the driver capabilities from the kernel,
move the initialization of the rfkill object to
wpa_driver_nl80211_finish_drv_init().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-12-18 22:26:18 +02:00
Ilan Peer
6da504a1f5 nl80211: Handle rfkill for P2P Device interface
The rfkill processing in nl80211 driver assumes that the
INTERFACE_ENABLED/DISABLED will be also issued, so does not do much in
the rfkill callbacks. However, as a P2P Device interface is not
associated with a network interface, these events are not issued for it.

Handle rfkill events for the P2P_DEVICE interface by faking the
INTERFACE_ENABLED/DISABLED.

Signed-off-by: Moshe Benji <Moshe.Benji@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-12-18 22:26:18 +02:00
Matt Woods
47c1de20a4 atheros: Unify memory processing functions
There are two types of memory processing functions in the file
atheros_driver.c, such as memory and os_memory. Unify the processing
functions into one type which has the prefix "os_".

Signed-off-by: Matt Woods <matt.woods@aliyun.com>
2015-12-17 23:29:25 +02:00
Jouni Malinen
759a8a3a99 nl80211: Cancel all pending TX frame cookies
These needs to be cancelled so that the kernel driver does not get left
with all old entries blocking other offchannel operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 12:37:10 +02:00
Avraham Stern
09ea4309b6 nl80211: Add support for multiple scan plans for scheduled scan
Add 'scan plans' to driver scan parameters for scheduled scan.
Each 'scan plan' specifies the number of iterations to run the scan
request and the interval between iterations. When a scan plan
finishes (i.e., it was run for the specified number of iterations),
the next scan plan is executed. The last scan plan will run
infinitely.

The maximum number of supported scan plans, the maximum number of
iterations for a single scan plan and the maximum scan interval
are advertised by the driver.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-11-30 14:03:28 +02:00
Kanchanapally, Vidyullatha
4f30addb38 nl80211: Add support for aborting an ongoing scan
This adds the driver interface commands for issuing a request to abort
an ongoing scan operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 19:44:14 +02:00
Jouni Malinen
5ef0b84355 Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2015-11-26.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-26 19:42:56 +02:00
Jouni Malinen
1d6955e668 nl80211: Fix SIGNAL_POLL in IBSS and mesh
NL80211_CMD_GET_STATION does not work with the IBSS/mesh BSSID, so clear
the signal strength instead of returning failure when SIGNAL_POLL is
used in an IBSS/mesh.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 17:57:07 +02:00
Ahmad Kholaif
bee5d8e067 nl80211: Add VHT 160 MHz channel flags
This extends the previous design that covered only the VHT 80 MHz cases
for VHT channel flags. New functions are introduced to allow 160 MHz
bandwidth cases to determine the center channel and check availability
of a 160 MHz channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-25 19:01:14 +02:00
Avraham Stern
d8a3b66d7f driver: Make setting up AP optional when creating AP interface
When an AP interface it created, it is also setup and subscribes
for management frames etc. However, when the interface is added by
wpa_supplicant, setting up for AP operations is redundant because
it will be done by wpa_supplicant on wpa_drv_init() when setting
the interface mode to AP.

In addition, it may cause wpa_supplicant to fail initializing the
interface as it will try to subscribe for management frames on this
interface but the interface is already registered.

Change this, so when adding an AP interface, make setting up the AP
optional, and use it only when the interface is added by hostapd but not
when it is added by wpa_supplicant.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-11-22 17:42:59 +02:00
Ayala Beker
757785dab2 nl80211: Clear ignore_next_local_deauth flag
The de-authentication flow in wpa_driver_nl80211_deauthenticate() can
result in a locally generated de-authentication event. To avoid getting
this extra event ignore_next_local_deauth flag is set, and should be
cleared when the next local deauth event is received. However, it is not
cleared when the event shows up after the wpa_supplicant has started a
connection with a new AP, and as a result it might ignore future
deauth event from the driver.

Fix this by clearing the flag if the event is locally generated.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
2015-11-21 18:00:33 +02:00
Sara Sharon
cb2a926df8 nl80211: Clear ignore_next_local_deauth and ignore_deauth_event
The authentication flow in wpa_driver_nl80211_authenticate() can
result  in a locally generated de-authentication, in which both
next_local_deauth and ignore_next_local_deauth are set.

However, in mlme_event_deauth_disassoc(), when ignore_deauth_event is
set, the flag is cleared, but the flow immediately returns leaving
ignore_next_local_deauth set, which can result in ignoring future deauth
event from the driver, leaving the wpa_supplicant in an inconsistent
state.

Fix this by clearing both flags in case that next_local_deauth is set.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
2015-11-21 18:00:33 +02:00
Ravi Joshi
f32227ed9e Add QCA vendor attribute and event to indicate subnet change status
This allows offloaded roaming to inform user space of the change in IP
subnet post roaming. The device may have roamed to a network which is in
a different subnet which will result in IP connectivity loss. Indicating
the change in subnet enables the user space to refresh the IP address or
to perform IP subnet validation if unknown status is indicated.

The driver indication is reported with a new event from wpa_supplicant
in the following format:
CTRL-EVENT-SUBNET-STATUS-UPDATE status=<0/1/2>
where
0 = unknown
1 = IP subnet unchanged (can continue to use the old IP address)
2 = IP subnet changed (need to get a new IP address)

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-20 11:03:06 +02:00
Jouni Malinen
747ba1067d nl80211: Do not return incomplete hw capability info
If a memory allocation fails while parsing driver capabilities, drop all
mode/channel/rate information instead of returning possibly partial
information.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-17 19:50:34 +02:00
Ben Greear
68ac584a49 nl80211: Add debug message for passive scanning
This is more obvious than looking for the lack of 'Scan SSID' messages.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2015-11-15 19:20:35 +02:00
Jouni Malinen
ceb19ff7a6 privsep: Avoid undefined behavior in pointer arithmetic
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:16 +02:00
Jouni Malinen
45a283e6d0 wext: Avoid undefined behavior in pointer arithmetic
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:16 +02:00
Jouni Malinen
336869f05a nl80211: Avoid undefined behavior in pointer arithmetic
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 15:35:00 +02:00
Jouni Malinen
78c8ee488f ndis: Avoid undefined behavior in pointer arithmetic
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 15:35:00 +02:00
Jouni Malinen
d717126aa2 hostap: Avoid undefined behavior in pointer arithmetic
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 15:35:00 +02:00
Jouni Malinen
d034f498ce atheros: Avoid undefined behavior in pointer arithmetic
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 15:35:00 +02:00
Andrei Otcheretianski
e8dc205f17 nl80211: Disable 11b rates for P2P (additional cases)
Some drivers (like mac80211) do not accept changing the TX bitrate mask
before the network interface is up. Thus, calling
nl80211_disable_11b_rates() before the interface is up fails, and the
P2P network interface continues to use invalid bitrates.

To fix this call nl80211_disable_11b_rates() immediately after the
interface is brought up (and also after rfkill is unblocked).

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-14 23:57:53 +03:00
Ashok Kumar Ponnaiah
d6afe03660 atheros: Fix hapd_deinit() handler with generic IEs set
atheros_set_opt_ie() needs to be called before freeing drv->wpa_ie to
avoid hitting double-free on the deinit path. Similarly,
drv->wps_beacon_ie and drv->wps_probe_resp_ie could have been used after
being freed. Fix these be moving the atheros_set_opt_ie() call in
atheros_deinit().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-14 18:43:26 +03:00
Jouni Malinen
712525b01e nl80211: Increase buffer size for reporting scan frequencies
It is possible for a driver to support sufficient number of channels to
hit the previous limit of 200 characters for the "nl80211: Scan included
frequencies:" debug message. Increase the maximum buffer length to 300
characters to allow more complete list of scanned frequencies to be
written into the debug log. This limit is more in line with the
MAX_REPORT_FREQS (50) limit.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-14 18:43:26 +03:00
Jouni Malinen
dd9a42efbc Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2015-05-06.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-06 23:10:17 +03:00
Andrei Otcheretianski
2d3943ce5b nl80211: Specify CSA offsets in send_mlme() driver op
Some management frames contain CSA counters which should be updated by
kernel. Change driver op send_mlme() allowing to send a frame,
specifying an array of offsets to the CSA counters which should be
updated. For example, CSA offsets parameters should be specified when
sending Probe Response frames during CSA period.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-03 21:07:35 +03:00
Andrei Otcheretianski
366179d218 nl80211: Suppport multiple CSA counters
Channel switch may be performed using both CSA and eCSA IEs together.
This may happen, for example with a P2P GO on band A with legacy
clients. Extend driver API to support up to 2 CSA counters.

This patch also includes the required implementation for nl80211.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-03 19:56:08 +03:00
Jouni Malinen
b658547dd5 nl80211: Add build option for QCA vendor extensions
This allows the binary sizes to be reduced if no support for nl80211
vendor extensions are needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 12:45:27 +03:00
Kanchanapally, Vidyullatha
8e5097456a nl80211: Extract driver offchannel simultaneous capability
Make the driver offchannel simultaneous capability available to
wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 01:41:46 +03:00
Kanchanapally, Vidyullatha
adcd7c4b0b nl80211: Support vendor scan together with normal scan
Allow wpa_supplicant to use vendor scan (if supported by the driver)
together with the normal nl80211 scan and handling external scan events.
Since this results in possibility of concurrent scan operations, some of
the operations related to scan results need to check more carefully when
an event is relevant for a specific interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 01:41:46 +03:00
Kanchanapally, Vidyullatha
f22a080cdc nl80211: Driver interaction for QCA vendor scan
This commit contains the necessary changes for supporting the QCA vendor
scan implementation, i.e., sending the vendor scan command to underlying
driver and handling the vendor scan events from the driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 01:41:46 +03:00
Alan T. DeKok
939471b9eb Linker changes for building eapol_test on OS X
Signed-off-by: Alan DeKok <aland@freeradius.org>
2015-09-25 19:32:14 +03:00
Jouni Malinen
6ebe816be0 wpa_priv: Add authentication command and event
These are needed to work with nl80211 driver interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 13:21:17 +03:00
Jouni Malinen
06f52b12f9 wpa_priv: Add support for EVENT_SCAN_STARTED
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 12:39:11 +03:00
Jouni Malinen
c968f2d56c wpa_priv: Clear extended_capa pointers
For now, there is no support for passing extended_capa pointers through
the driver_privsep.c interface from wpa_priv. Avoid leaving bogus
pointers by explicitly clearing these on both wpa_priv and
wpa_supplicant sides.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 12:32:58 +03:00
Jouni Malinen
f429ec443f nl80211: Use nla_put_nested() to set NL80211_ATTR_MAC_ADDRS
This allows an empty nested list (i.e., no MAC addresses) to be included
in the NL80211_CMD_SET_MAC_ACL message unlike with
nla_nest_start()/nla_nest_end() where the current libnl implementation
removes the "empty" attribute and causes cfg80211 to reject the command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-28 12:49:17 +03:00
Srinivas Dasari
75055a538b nl80211: Use beacon TSF if it is newer than Probe Response TSF
cfg80211 sends TSF information with the attribute NL80211_BSS_BEACON_TSF
if the scan results include information from Beacon frame. Probe
Response frame information is included in NL80211_BSS_TSF. If the device
receives only Beacon frames, NL80211_BSS_TSF might not carry updated
TSF, which results an older TSF being used in wpa_supplicant. Fetch both
possible TSF values (if available) and choose the latest TSF for the BSS
entry.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-13 20:58:05 +03:00
Jouni Malinen
708ec753bc tests: ap_scan=2 AP mode operation and scan failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-11 21:48:55 +03:00
Ahmad Kholaif
983422088f nl80211: Add means to query preferred channels
Extend the QCA vendor specific nl80211 interface to query the preferred
frequency list from driver and add a new wpa_cli command to query this
information.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-29 19:46:31 +03:00
Ahmad Kholaif
7c813acf9c P2P: Inform driver of the operating channel following group formation
Upon GO Negotiation completion, if the remote peer becomes GO, send a
hint event over QCA vendor specific interface to inform the driver of
the likely operating channel of the P2P GO.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-29 19:10:16 +03:00
Ahmad Kholaif
079a28f7b8 nl80211: Add concurrency capabilities to driver status
Extend the nl80211 interface command "driver status" to retrieve the
concurrency capabilities from the driver using the QCA vendor
extensions.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-29 18:52:12 +03:00
Peng Xu
d0cdccd307 Fix generating offloaded ACS channel list when hw_mode is set to any
When ACS is offloaded to device driver and the hw_mode parameter is set
to any, the current_mode structure is NULL which fails the ACS command.
Fix this by populating the ACS channel list with channels from all bands
when current_mode is NULL.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-28 23:22:24 +03:00
Srinivas Dasari
844dfeb804 QCA vendor command support to set band to driver
Add vendor command to pass SET setband command to the driver and read
the updated channel list from driver when this notification succeeds.
This allows the driver to update its internal channel lists based on
setband configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-28 21:00:18 +03:00
Ashok Ponnaiah
8659e33342 atheros: Enable PMF functionality without CONFIG_IEEE80211R=y
This extends the previous PMF (CONFIG_IEEE80211W=y) design that used
functionality from the FT (CONFIG_IEEE80211R=y) changes to work without
requiring CONFIG_IEEE80211R=y build option to be included.

Signed-off-by: Ashok Ponnaiah <aponnaia@qti.qualcomm.com>
2015-07-24 16:55:16 +03:00
Jouni Malinen
7420e36293 hostap: Remove special handling for protocol version 3 on RX
This functionality was removed from the Host AP driver in May 2003, so
there is not any point in maintaining this in hostapd either.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 23:43:10 +03:00
Anton Nayshtut
46ab9b8cf0 nl80211: Register for FST Action frames (STA)
wpa_supplicant will process these Action frames for FST operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Anton Nayshtut
cb05808c46 nl80211: Generic Linux master interface support for hostapd
Previously, hostapd only supported the case of EAPOL frames receiving
from interfaces enslaved into bridge. This commit adds support for any
Linux master (teaming, openvswitch, bonding, etc.) to be detected.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 12:33:29 +03:00
Dan Williams
e8492c8145 hostap: Fix send_mlme() after 'freq' parameter addition
This fixes the incomplete driver_hostap.c change from commit
5d180a7739 ('drivers: Add freq parameter
to send_mlme() function') that did not take into account the internal
callers.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-07-07 19:40:49 +03:00
Jouni Malinen
f97e3ce473 drivers: Use unsigned arguments for sta_set_flags()
Since BIT() is now returning unsigned int, these functions need to match
that to avoid compiler warnings.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Kevin Cernekee
ded14ce95d Android: Fix nl80211 build if BOARD_*_PRIVATE_LIB is unspecified
wpa_supplicant has stub functions if the external p2p symbols are
unavailable, but the build still fails if the
wpa_driver_nl80211_driver_cmd symbol is missing.  Fix this by leaving the
function pointer NULL.  This is safe because wpa_drv_driver_cmd() performs
a NULL check.

Signed-off-by: Kevin Cernekee <cernekee@google.com>
2015-06-26 22:46:49 +03:00
Kevin Cernekee
a1407217b1 Android: Rename ANDROID_P2P_STUB to ANDROID_LIB_STUB
If BOARD_HOSTAPD_PRIVATE_LIB is not used on an Android build, we will
need to replace both the p2p functions *and* wpa_driver_nl80211_driver_cmd
in order to successfully link.  Let's make the name more generic so it is
more obvious what it is used for.

Suggested-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: Kevin Cernekee <cernekee@google.com>
2015-06-26 22:46:16 +03:00
Jouni Malinen
f6df3f3a00 Use os_* wrapper more consistently
os_free() needs to be used when freeing memory that was allocated with
os_malloc()/os_zalloc()/os_calloc().

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 20:08:00 +03:00
Jouni Malinen
6ce1bea1ff bsd: Remove redundant NULL check in bsd_init()
drv cannot be NULL here (it is dereferenced even on the preceding line)
and anyway, os_free(NULL) is allowed, so remove the redundant check.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-23 18:20:24 +03:00
Ilan Peer
1ac977bdd5 nl8021: Allow sending wowlan configuration on any interface
Sending a wowlan configuration command can be done on any wireless
interface (not only netdev), as it is a device configuration and not
interface configuration specific. Fix the code to allow it to be
sent on any interface.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 16:17:04 +03:00
Ilan Peer
489970270b nl80211: Remove android_genl_ctrl_resolve()
Android libnl_2 implementation added support for "nl80211" name in
commit 'libnl_2: Extend genl_ctrl_resolve() to support "nl80211" name'
in July 2012 which got included in Android 4.2. It is fine to drop this
old Android ICS workaround from wpa_supplicant now.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-06-19 16:06:28 +03:00
Andrei Otcheretianski
5d180a7739 drivers: Add freq parameter to send_mlme() function
Change send_mlme() API to allow sending management frames on a specific
channel, overriding the internal driver decision.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-06-14 23:16:55 +03:00
Peng Xu
3784c0589e Extend hw_mode to support any band for offloaded ACS case
When device supports dual band operations with offloaded ACS, hw_mode
can now be set to any band (hw_mode=any) in order to allow ACS to select
the best channel from any band. After a channel is selected, the hw_mode
is updated for hostapd.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-27 12:17:57 +03:00
Jouni Malinen
346517674a nl80211: Verify that cipher suite conversion succeeds
It was possible for the WPA_ALG_PMK algorithm in set_key() to result in
trying to configure a key with cipher suite 0. While this results in a
failure from cfg80211 or driver, this is not really desirable operation,
so add a check for cipher suite conversion result before issuing the
nl80211 command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-27 16:49:06 +03:00
Mikael Kanstrup
8b423edbd3 Declare all read only data structures as const
By analysing objdump output some read only structures were found in
.data section. To help compiler further optimize code declare these
as const.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2015-04-25 17:33:06 +03:00
Jouni Malinen
8ea8a89cb4 nl80211: Extend unique MAC address assignment for station iftype
Previously, only P2P and mesh use cases enforced unique MAC address for
a dynamically added virtual interface. Extend this to cover normal
station mode interfaces since those can now be added with INTERFACE_ADD.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-24 01:22:14 +03:00
Jouni Malinen
d9d1b9527a Use SSID_MAX_LEN define instead of value 32 when comparing SSID length
This makes the implementation easier to understand.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:44:18 +03:00
Jouni Malinen
60eb9e173e AP: Enable multicast snooping on bridge if ProxyARP IPv6 is in use
This is needed to allow correct ProxyARP behavior for IPv6.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-13 14:00:32 +03:00
Jouni Malinen
e8e365def6 wext: Add support for renamed Host AP driver ifname
Previous workaround for WEXT events from the Host AP driver required
wlan# and wifi# interfaces to have fixed names with the same number.
While that used to be the common case ten years ago, it is less common
nowadays. Extend this to use sysfs (if available) to figure out the
wifi# interface name if the specified interface is detected to be using
the Host AP driver.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-29 11:42:02 +03:00
Krishna Vamsi
c41d0840a1 nl80211: Allow driver-based roam to change ESS
This extends NL80211_CMD_ROAM event processing to allow the driver to
roam to another ESS (different SSID) when using offloaded BSS selection.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-24 21:13:28 +02:00
Ashok Kumar Ponnaiah
1de071007e atheros: Clear WPS appie during deinit
The WPS IE(s) need to be cleared from the driver explicitly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-24 15:05:43 +02:00
Manikandan Mohan
857d94225a Extend offloaded ACS QCA vendor command to support VHT
Update ACS driver offload feature for VHT configuration. In addition,
this allows the chanlist parameter to be used to specify which channels
are included as options for the offloaded ACS case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-23 12:18:05 +02:00
Eliad Peller
e7a296ba13 Remove unused shared_freq driver op
This driver op is not used anymore

Signed-off-by: Eliad Peller <eliad@wizery.com>
2015-03-20 15:56:59 +02:00
Zefir Kurtisi
5f9c92f8f7 nl80211: Fix vendor command handling
In wiphy_info_handler(), vendor specific commands were
interpreted as QCA specific without checking for the OUI,
which caused incorrect setting of driver flags with
commands from other vendors. As a result, that could
prevent proper operation (e.g., inability to process CSA).

This patch ensures that QCA vendor specific commands are
checked against QCA OUI before related flags are set.

Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
2015-03-20 15:56:59 +02:00
Jouni Malinen
74fa78b281 Add AVG_BEACON_RSSI to SIGNAL_POLL output
If the driver reports separate signal strength average for Beacon
frames, report that in SIGNAL_POLL output.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 20:45:20 +02:00
Janusz Dziedzic
4acdc48a43 nl80211: Handle NL80211_ATTR_EXT_FEATURES attribute
Handle NL80211_ATTR_EXT_FEATURES attribute and
NL80211_EXT_FEATURE_VHT_IBSS to determine whether
the driver supports VHT with IBSS.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-03-15 20:36:49 +02:00
Jouni Malinen
a0563ac626 Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2015-03-04.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 20:35:21 +02:00
Sunil Dutt
3f0e6ec4f3 nl80211: Extend NL80211_CMD_TDLS_OPER to support discovery
ML80211_ATTR_TDLS_OPERATION can now set to NL80211_TDLS_DISCOVERY_REQ to
allow the driver to request wpa_supplicant to initiate TDLS Discovery
Request.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 21:13:21 +02:00
Sunil Dutt
c10ca2a66f TDLS: Allow driver to request TDLS Discovery Request initiation
This extends the TDLS operation request mechanism to allow TDLS
Discovery Request to be initiated by the driver similarly to the
existing Setup and Teardown requests.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 21:08:54 +02:00
Jouni Malinen
bea8d9a39a nl80211: Use the new bridge port option proxyarp_wifi
The initial IEEE 802.11 ProxyARP functionality in the kernel needed
changes in behavior and that ended up requiring an independent
configuration parameter to be used. Update hostapd to use that new
proxyarp_wifi parameter instead of the earlier proxyarp.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 11:32:16 +02:00
Jouni Malinen
6e9023ea49 DFS: Allow wpa_supplicant AP mode to use non-offloaded DFS
This extends the hostapd-like setup of DFS-in-userspace for
wpa_supplicant AP mode operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-05 17:25:13 +02:00
Ahmad Kholaif
02e42ab75b nl80211: Add vendor event parsing for DFS offload events
This converts the QCA vendor event to EVENT_DFS_* events for the case
of DFS offloaded to the driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-05 17:24:32 +02:00
Vivek Natarajan
9a05d98bf9 atheros: Add a new flag for OSEN support
Signed-off-by: Vivek Natarajan <nataraja@qti.qualcomm.com>
2015-03-02 12:40:41 +02:00
Jouni Malinen
f51f54a007 nl80211: Resubscribe to nl80211 events on global nl_event socket
This allows wpa_supplicant to recover from some of the cases where
cfg80211 is unloaded and reloaded without restarting wpa_supplicant. The
netlink socket used for nl80211 events (global->nl_event) seemed to end
up in otherwise functionality state, but with all the event memberships
lost when cfg80211 gets reloaded.

There does not seem to be any clear way of determining when this has
happened, so it looks simplest to just try to re-subscribe to all the
events whenever an interface is re-enabled or added.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-22 18:03:42 +02:00
Jouni Malinen
a1b790eb9d Select AP based on estimated maximum throughput
This modifies the BSS selection routines to calculate SNR and estimated
throughput for each scan result and then use the estimated throughput as
a criteria for sorting the results. This extends the earlier design by
taking into account higher throughput rates if both the AP and local
device supports HT20, HT40, or VHT80. In addition, the maximum rate is
restricted based on SNR.

In practice, this gives significantly higher probability of selecting
HT/VHT APs when there are multiple BSSes in the same ESS and SNR is not
low enough to prevent higher MCS use.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-22 11:09:54 +02:00
Eliad Peller
abb8d08b8a nl80211: Add support for configuring P2P GO CTWindow
Configure the GO CTWindow on APstart if the driver supports it and this
parameter is set in wpa_supplicant configuration.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2015-02-21 16:07:53 +02:00
Eliad Peller
0b8bcaa50f P2P: Allow configuring CTWindow when working as GO
Read p2p_go_ctwindow (0-127 TUs) from the config file, and pass it to
the driver on GO start.

Use p2p_go_ctwindow=0 (no CTWindow) by default.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2015-02-21 16:07:53 +02:00
Janusz Dziedzic
563ee1832b IBSS: Add support for VHT80 configuration
Configure VHT80 based on driver capabilities.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-02-21 16:07:53 +02:00
Janusz Dziedzic
4d9e6fba2a IBSS: Add fixed_freq network parameter
Add fixed_freq=<0/1> network block parameter and pass it to the driver
when starting or joining an IBSS. If this flag is set, IBSS should not
try to look for other IBSS networks to merge with on different channels.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-02-21 16:07:53 +02:00
Romain Naour
97fc2dc612 Allow libnl-3.0 include path be specified
The '/usr/include/libnl3' header path is unsafe for cross-compilation.
Use pkg-config to find libnl-3.0 headers by default and alternatively,
allow LIBNL_INC=<path> to be used in .config to override.

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
2015-02-21 11:36:53 +02:00
Ahmad Kholaif
480994dafb nl80211: Allocate QCA vendor subcmds for DFS radar detected and CAC events
When DFS offloading capability is supported by the driver, the driver
should use these events to indicate when a radar pattern has been
detected, channel availability check (CAC) has been completed, aborted
or finished after the non-occupancy period is over on a DFS channel.

Also, add a new driver.h event to be used by NL80211 to indicate CAC
Started event on a DFS channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-11 16:51:33 +02:00
Jouni Malinen
106fa1e97e nl80211: Indicate interface-down event only for the main netdev
RTM_NEWLINK event without IFF_UP were processed for all related
interfaces (including VLANs and bridge). While these events may need to
be processed for other purposes, they should not end up claiming that
the main interface has been disabled, so indicate
EVENT_INTERFACE_DISABLED only if the ifname matches the first BSS ifname
for the interface. In addition, fix some of the ifup/down checks from
if_indextoname() cases to actually use the resolved ifname (namebuf)
rather than hardcoding the first configured ifname to be used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-11 10:31:12 +02:00
Jouni Malinen
f33c8606f4 Re-enable beaconing on interface disable+enable
This is a step towards enabling hostapd to restart AP mode functionality
if the interface is disabled and re-enabled, e.g., with ifconfig down
and up. This commit takes care of beaconining only which may be
sufficient for open mode connection, but not for WPA2 cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-10 20:27:00 +02:00
Jouni Malinen
fc99fab7e5 nl80211: Print a debug log entry on NL80211_CMD_PROBE_CLIENT failures
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-10 20:27:00 +02:00
Jouni Malinen
1db718b3ce nl80211: Test vendor command and event
This adds testing code (for CONFIG_TESTING_OPTIONS=y builds only) to
send an nl80211 vendor command and report a test vendor event in case
the driver supports this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-09 18:07:29 +02:00
Masashi Honma
0cb5f8d945 mesh: Fix inactivity timer for 32 bit system
Commit 5a2a6de6a5 ('mesh: Make inactivity
timer configurable') has a problem on 32 bit systems. Setting
NL80211_MESHCONF_PLINK_TIMEOUT to 0xffffffff causes expiration of STA in
a minute by NL80211_CMD_DEL_STATION event. this is the kernel rule for
STA expiration:

(current jiffies) > (frame Rx jiffies + NL80211_MESHCONF_PLINK_TIMEOUT * 250)

On a 32 bit system, the right side could overflow and be unexpected
small value if NL80211_MESHCONF_PLINK_TIMEOUT is sufficiently large. STA
expiration occurs by this reason.

This patch solves the problem by disabling the STA expiration
functionality in mac80211. However, old kernel does not support
disabling it. If so, this patch sets mac80211 inactivity timer 60
seconds into future from the wpa_supplicant inactivity timer.

And I mis-understood that mesh_max_inactivity=0 disables inactivity
timer in wpa_supplicant. This commit fixes it also.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2015-02-07 22:20:45 +02:00
Jouni Malinen
fa38860c5e nl80211: Fix build with libnl 1.1
Commit 630b3230c8 ('nl80211: Increase
netlink receive buffer size') added unconditional use of
nl_socket_set_buffer_size() which was not included in libnl 1.1. Fix use
of that old version by making this conditional on CONFIG_LIBNL20.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:50:02 +02:00
Jouni Malinen
399e61353a Add Suite B AKMs to key_mgmt capability list
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:55 +02:00
Jouni Malinen
5e3b5197cc Add Suite B 192-bit AKM
WPA-EAP-SUITE-B-192 can now be used to select 192-bit level Suite B into
use as the key management method.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:52 +02:00
Jouni Malinen
98cd3d1c3b Preparations for variable length KCK and KEK
This modifies struct wpa_ptk to allow the length of KCK and KEK to be
stored. This is needed to allow longer keys to be used, e.g., with
Suite B 192-bit level.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:26:49 +02:00
Jouni Malinen
86f9b1c706 nl80211: Fix default group key management index configuration
The correct nl80211 flag for group key management cipher was set only
for BIP (AES-CMAC-128). The same flag needs to be used with the newer
ciphers BIP-CMAC-256, BIP-GMAC-128, and BIP-GMAC-256.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-24 19:37:42 +02:00
Jouni Malinen
630b3230c8 nl80211: Increase netlink receive buffer size
libnl uses a pretty small buffer (32 kB that gets converted to 64 kB) by
default. It is possible to hit that limit in some cases where operations
are blocked, e.g., with a burst of Deauthentication frames to hostapd
and STA entry deletion. Try to increase the buffer to make this less
likely to occur.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-22 13:51:15 +02:00
Luciano Coelho
7b7b4449a9 nl80211: Fix reading of the extended capabilities mask
We were copying the NL80211_ATTR_EXT_CAPA attribute into the
extended_capa_mask element, which is incorrect. Use
NL80211_ATTR_EXT_CAPA_MASK instead.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2015-01-20 01:57:59 +02:00
Janusz Dziedzic
95ff306988 nl80211: Allow HT/VHT to be disabled for IBSS
Allow HT/VHT overrides to be used for IBSS.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-01-19 02:35:43 +02:00
Masashi Honma
7451a217be mesh: Return negative value on join failed
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2015-01-19 02:35:43 +02:00
Masashi Honma
5a2a6de6a5 mesh: Make inactivity timer configurable
Current mesh code uses ap_max_inactivity as inactivity timer. This patch
makes it configurable.

There is another mesh inactivity timer in mac80211. The timer works even
if user_mpm=1. So this patch sets the max value to the timer for
workaround.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2015-01-19 02:35:43 +02:00
Masashi Honma
b9749bac81 AP: Expire STA without entry in kernel
If the inactivity check returns that there is no entry remaining for the
STA in the kernel, drop the STA in hostapd as well.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2015-01-19 02:35:43 +02:00
Jouni Malinen
1fef85c7c5 nl80211: Fix AP-scan-in-STA-mode error path behavior
If a second scan trigger attempt fails in STA mode, the error path was
supposed to restore the old mode that was in use before changing to STA
mode. However, wpa_driver_nl80211_set_mode() changes drv->nlmode on
success, so the recovery path needs to use the saved old_mode value
instead.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-15 00:59:14 +02:00
Jouni Malinen
21c74e8462 nl80211: Use a helper function to put mesh_id
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Jouni Malinen
85e1fad8a5 nl80211: Use a helper function for putting beacon interval
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Jouni Malinen
f7e889fa2d mesh: Convert channel configuration to use common routines
Use struct hostapd_freq_params just like other modes do instead of
mesh-specific freq and ht_mode.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Jouni Malinen
1fc4ab2367 nl80211: Move debug prints into nl80211_put_freq_params()
This way all callers can get the benefit of the same debug prints.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Jouni Malinen
cae87abd13 nl80211: Add a helper function for putting basic rates
There is no need for maintaining two more or less identical copies of
this functionality.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-10 17:35:53 +02:00
Janusz Dziedzic
1830817ece IBSS: Add WPA_DRIVER_FLAGS_HT_IBSS
Add WPA_DRIVER_FLAGS_HT_IBSS driver feature flag. Some drivers could not
set this feature and next could fail when we will enable HT support for
IBSS with error message: nl80211: Join IBSS failed: ret=-22 (Invalid
argument).

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-01-10 17:35:53 +02:00
Imre Vadasz
28c91ee124 bsd: Fix parsing of ieee80211req_scan_result on FreeBSD and DragonFly
On FreeBSD and DragonFly BSD, we additionally need to skip the
isr_meshid_len bytes of the MESH ID, to get the correct address for
copying the IE data.

The isr_meshid_len field was added in the FreeBSD svn revision r195618
in 2009, so I don't think we need to check the FreeBSD version here.

Signed-off-by: Imre Vadász <imre@vdsz.com>
2015-01-10 11:43:29 +02:00
Jouni Malinen
d58ade2121 nl80211: Fix compilation with libnl 1.1 and 2.0
Unfortunately, libnl 3.0 has changed the API in a way that is not
backwards compatible by renaming nlmsg_len() to nlmsg_datalen() without
leaving the older nlmsg_len() defined. As such, there does not seem to
be any clean way of using this function without breaking the build with
some libnl versions. For now, replace this call with direct calculation
of the data length since it can be done with a simple one-liner that
compiles with all libnl versions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-06 18:30:20 +02:00
Jouni Malinen
dcf8fbc058 nl80211: Simplify event processing error paths
These are practically unreachable code since cfg80211 fills in the
required attributes or does not send the event. Keep the checks in
place, but minimize the extra code in wpa_supplicant/hostapd.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-05 13:40:07 +02:00
Jouni Malinen
38751d8bd5 nl80211: Remove cfg80211 state mismatch workaround for authentication
cfg80211 dropped support for tracking BSS authentication state and
setting NL80211_BSS_STATUS_AUTHENTICATED in 'cfg80211: stop tracking
authenticated state' three years ago (starting in Linux 3.4). As such,
this workaround code in wpa_supplicant cannot be reached anymore. There
is no real need for maintaining it for older kernels either, since there
are other ways of detecting and working around state mismatches with the
actual authentication operations failing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-05 12:21:12 +02:00
Jouni Malinen
64ae244763 nl80211: Check support for rekey offload on first use
While there is no explicit driver capability advertisement for this in
nl80211, the EOPNOTSUPP response can be interpreted as a clear
indication of NL80211_CMD_SET_REKEY_OFFLOAD not being supported. Check
for that and don't try to offload keys again if the driver has not use
for them.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-05 12:00:09 +02:00
Ilan Peer
86056fea63 nl80211: Handle MAC address randomization in scan/sched_scan
1. Process supported driver capabilities.
2. Populate scan request with MAC address randomization data

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-01-04 23:06:31 +02:00
Ilan Peer
ff23ed221d driver: Add definitions for MAC address randomization in scan
1. Add parameters to the scan command to allow MAC address
   randomization during scan and scheduled scan.
2. Add capability bits to publish MAC address randomization support
   in scan and scheduled scan.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-01-04 21:46:38 +02:00
Arik Nemtsov
72b2605f15 nl80211: Pass TDLS channel-switch start/stop params to kernel
The kernel-driver/firmware are responsible for performing periodic
switches to the target channel with the given peer. Propagate all TDLS
channel switching related information to kernel.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2015-01-04 21:46:37 +02:00
Arik Nemtsov
6b90deae4d TDLS: Propagate enable/disable channel-switch commands to driver
The supplicant code does not try to control the actual channel of the
radio at any point. It simply passes the target peer and channel
parameters to the driver. It's the driver's responsibility to
periodically initiate TDLS channel-switch operations when TDLS
channel-switching is enabled.

Allow enable/disable operations to be invoked via the control interface.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2015-01-04 20:30:11 +02:00
Arik Nemtsov
4daa572925 TDLS: Add channel-switch capability flag
Propagate a driver TDLS channel-switch support bit from nl80211 to
TDLS code.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2015-01-04 18:59:31 +02:00
Jouni Malinen
ca16586afe Sync with wireless-testing.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2014-11-26.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-04 18:59:31 +02:00
Avraham Stern
730a0d16bf nl80211: Always register management frames handler
If registering WMM-AC ADDTS response action frame or WMM-AC DELTS
action frame fails, the management frame handler is not being
registered. This results with a segmentation fault when trying to
unsubscribe the handler when the interface is removed.
Fix it by always registering the handler and just returning a negative
value to note that the action frame could not be registered.

This fixes an issue introduced in the commit
dfa8787833 ('nl80211: Implement
add_ts/del_ts ops').

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-01-04 18:28:03 +02:00
Jouni Malinen
4e8f31e2ef doc: Extend driver.h documentation
This documents some more parts of the driver wrapper interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-03 18:24:20 +02:00
Jouni Malinen
bbd89bfca0 nl80211: Clear nlmsg payload with keys before freeing
This reduces the time possible keys could remain in heap memory. Couple
of the nl80211 messages include keys (TK for normal ciphers and
KCK/KEK/PMK for various offloading cases).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-03 01:15:34 +02:00
Jouni Malinen
f2535da879 nl80211: Note linux_set_iface_flags() failure in debug log
There was one final remaining linux_set_iface_flags() call that did not
check the result. This specific one does not really matter much, but
anyway, be more consistent by checking the result and log any error in
debug log. (CID 74146)

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:56:04 +02:00
Jouni Malinen
49e3eea8d9 Avoid -Wshadow warnings from older gcc versions
It looks like gcc 4.8.2 would warn about these with -Wshadow, but 4.6.3
did.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-26 13:21:00 +02:00
Jouni Malinen
a193231dfb Clean up debug prints to use wpa_printf()
This converts most of the remaining perror() and printf() calls from
hostapd and wpa_supplicant to use wpa_printf().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-26 13:20:57 +02:00
Jouni Malinen
36f0cf3774 privsep: Fix compilation due to associate() parameter updates
struct wpa_driver_associate_params moved to using struct
hostapd_freq_params instead of just frequency. Need to update wpa_priv
to do same.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-25 16:37:12 +02:00
Jouni Malinen
40e7639600 nl80211: Check if_indextoname() return value for bridge events
It would be at least theoretically possible for the bridge netdev to
have disappeared at the time hostapd processes the RTM newlink/dellink
message. As such, it is better to verify that if_indextoname() actually
returned success before printing the bridge ifname in debug. In
addition, there is not much point trying to add the bridge ifindex into
the list of own ifindexes in case the interface has already been
removed, so skip that part as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-23 19:43:24 +02:00
Jouni Malinen
ce20a3702c nl80211: Remove practically unused process_drv_event()
This was used in the past, but all the event processing is now either
through process_global_event() or process_bss_event().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-22 16:12:11 +02:00
Masashi Honma
4b4093686b mesh: Make maximum number of peer links configurable
Maximum number of peer links is maximum number of connecting mesh peers
at the same time. This value is 0..255 based on the
dot11MeshNumberOfPeerings range.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:52:31 +02:00
Masashi Honma
9c58c5f72c mesh: Make beacon interval configurable
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-21 23:38:20 +02:00
Jouni Malinen
5ef8e39fa7 nl80211: Fix interface-in-different-bridge case
The local ifindex list needs to be updated only if the current bridge
interface is the correct one. If hostapd is going to move the interface
to another bridge, the old bridge ifindex must not be added. In
addition, when removing the bridge interface on deinit, it may need to
be set down to allow bridge removal.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 21:00:08 +02:00
Jouni Malinen
666e508ccf nl80211: Fix cfg80211 workaround for IBSS join
The interface was incorrectly changed to station mode between the two
IBSS join requests and that made the second attempt fail. Remove that
undesired mode clearing from this special case of IBSS leave sequence.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 19:35:23 +02:00
Jouni Malinen
533fe09b78 nl80211: Fix no-encrypt for IEEE 802.1X WEP EAPOL
Commit 9f12614b8c ('nl80211: Do not
encrypt IEEE 802.1X WEP EAPOL') tried to use
NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT to disable encryption of EAPOL
frames for WEP IEEE 802.1X. However, it used incorrect key management
suite (IEEE 802.1X with WPA/WPA2 while the non-WPA version is needed
here). Consequently, the no-encrypt flag was never set to the driver
(WPA/WPA2 cases do not meet the WEP as pairwise criteria).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 17:35:03 +02:00
Jouni Malinen
1033315fbe nl80211: Remove send_and_recv_msgs_global() wrapper
There was only a single user for this and calling send_and_recv()
directly is as simple as using this wrapper.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 15:45:28 +02:00
Jouni Malinen
bdf5ccb264 nl80211: Remove unnecessary function declarations
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-20 15:37:16 +02:00
Masashi Honma
5b78493f3b mesh: Add mesh interface creation command for mesh gate
The mesh gate is used to bridge (or route) between mesh network and
another network. For example, mesh gate acts as router between mesh
network and IEEE 802.11 BSS network.

This command makes a virtual mesh interface to be used for mesh gate.

This command expects to be used like this.

wpa_cli -i wlan0 MESH_INTERFACE_ADD ifname=mesh0
wpa_cli -i mesh0 add_network
wpa_cli -i mesh0 set_network 0 ssid '"commell_2X_mmm"'
wpa_cli -i mesh0 set_network 0 mode 5
wpa_cli -i mesh0 set_network 0 frequency 2412
wpa_cli -i mesh0 set_network 0 key_mgmt SAE
wpa_cli -i mesh0 set_network 0 psk '"01234567"'
wpa_cli -i mesh0 mesh_group_add 0
wpa_cli -i wlan0 mesh_group_remove mesh0

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2014-12-14 23:27:43 +02:00
Jörg Krause
33c7eb810a wext: Fix musl build error
Building wpa_supplicant with the musl C library fails since musl does
not define type names such as '__uint32_t'. To support building
wpa_supplicant with the musl C library use the integer types declared in
the ISO C standard header file <stdint.h>.

Signed-off-by: Jörg Krause <jkrause@posteo.de>
2014-12-14 18:05:32 +02:00
Rafał Miłecki
7c4027f604 nl80211: Report new station / assoc event for the correct BSS
drv->ctx always points to the first BSS and we should report event using
BSS related to the interface we got NL80211_CMD_NEW_STATION from.
This fixes STA association for drivers using NL80211_CMD_NEW_STATION and
multiple virtual interfaces.

Before:
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0-1 (ifindex:7)
nl80211: New station 02:00:00:00:01:00
wlan0: STA 02:00:00:00:01:00 IEEE 802.11: associated

After:
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0-1 (ifindex:7)
nl80211: New station 02:00:00:00:01:00
wlan0-1: STA 02:00:00:00:01:00 IEEE 802.11: associated

This is not applicable to the cases where authentication (AP SME & MLME)
is in hostapd and hostapd_assoc_cb() instead of hostapd_notif_assoc()
handles BSS selection.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2014-12-14 17:29:26 +02:00
Jouni Malinen
a0a34d536e nl80211: Add rrm_flags to STATUS-DRIVER
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-12 21:09:11 +02:00
Jouni Malinen
2961bfa8e1 Remove unused send_eapol() driver op
The send_eapol() callback was used by driver_test.c, but with that
removed, there is no remaining users of the alternative EAPOL frame
transmitting mechanism in wpa_supplicant, i.e., all remaining driver
interfaces use l2_packet instead. Remove the send_eapol() to get rid of
unused code.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-11 15:40:07 +02:00
Chet Lanctot
15badebd47 nl80211: Add QCA vendor specific query of device/driver features
This commit introduces a QCA vendor command that allows interrogation of
the vendor-specific features supported by the device/driver. Currently
the only defined feature is the ability to offload key management.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-09 21:08:21 +02:00
Jouni Malinen
1f90dfd2cd nl80211: Add frame control and sequence control field in RX frame debug
This makes it easier to debug issues related to duplicated management
frames on receive path.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-09 01:19:20 +02:00
Jouni Malinen
4bd7195466 nl80211: Try to unmask 11b rates again on next connection request
It is possible for unmasking of 11b rates to fail if a P2P group is
terminated while the netdev is down (e.g., due to rfkill block). This
could result in the 11b TX rates being left masked for non-P2P
operations. This would be particularly unfortunate for channel 14 use
since OFDM rates are not allowed on channel 14 and only OFDM rates were
configured P2P. This issue showed up, e.g., when running hwsim test case
rfkill_autogo followed by ap_wps_conf_chan14.

It may be possible to allow the failed operation in cfg80211/mac80211,
but it looks better to work around this on wpa_supplicant side as well.
Try to unmask the 11b rates again on the next connection request if the
rate unmasking operation had failed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-08 16:10:46 +02:00
Jouni Malinen
3e208481b5 nl80211: Add more debug prints for 11b rate disabling and re-enabling
This makes it easier to debug issues related to TX rate masking for P2P
use cases (and unmasking for non-P2P).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-08 16:01:51 +02:00
Jouni Malinen
d85e1fc8a5 Check os_snprintf() result more consistently - automatic 1
This converts os_snprintf() result validation cases to use
os_snprintf_error() where the exact rule used in os_snprintf_error() was
used. These changes were done automatically with spatch using the
following semantic patch:

@@
identifier E1;
expression E2,E3,E4,E5,E6;
statement S1;
@@

(
  E1 = os_snprintf(E2, E3, ...);
|
  int E1 = os_snprintf(E2, E3, ...);
|
  if (E5)
	E1 = os_snprintf(E2, E3, ...);
  else
	E1 = os_snprintf(E2, E3, ...);
|
  if (E5)
	E1 = os_snprintf(E2, E3, ...);
  else if (E6)
	E1 = os_snprintf(E2, E3, ...);
  else
	E1 = 0;
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	return -1;
  }
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else if (E6) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	return -1;
  }
|
  if (E5) {
	...
	E1 = os_snprintf(E2, E3, ...);
  } else {
	...
	E1 = os_snprintf(E2, E3, ...);
  }
)
? os_free(E4);
- if (E1 < 0 || \( E1 >= E3 \| (size_t) E1 >= E3 \| (unsigned int) E1 >= E3 \| E1 >= (int) E3 \))
+ if (os_snprintf_error(E3, E1))
(
  S1
|
{ ... }
)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
a80ba67a26 Check os_snprintf() result more consistently - success case
This converts os_snprintf() result validation cases to use
os_snprintf_error() in cases where success condition was used to execute
a step. These changes were done automatically with spatch using the
following semantic patch:

@@
expression E1,E2,E3;
statement S1;
@@

  E1 = os_snprintf(E2, E3, ...);
- if (\( E1 >= 0 \| E1 > 0 \) && \( (size_t) E1 < E3 \| E1 < (int) E3 \| E1 < E3 \))
+ if (!os_snprintf_error(E3, E1))
  S1

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
a9aaacbb50 Check os_snprintf() result more consistently - maximum length
This adds verification of os_snprintf() result against the maximum
buffer length. These changes were done automatically with spatch
using the following semantic patch:

@@
expression E1,E2,E3;
statement S1;
@@

  E1 = os_snprintf(E2, E3, ...);
- if (\( E1 < 0 \| E1 <= 0 \))
+ if (os_snprintf_error(E3, E1))
(
  S1
|
{ ... }
)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-08 11:42:07 +02:00
Jouni Malinen
8105821b39 Replace send_ft_action() driver_op with send_action()
This reduced number of unnecessarily duplicated driver interface
callback functions for sending Action frames by using the more generic
send_action() instead of FT specific send_ft_action().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 18:13:29 +02:00
Jouni Malinen
477af8f869 nl80211: Move scanning related functionality to a separate file
This helps in making the still overly large driver_nl80211.c somewhat
more manageable.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:59:26 +02:00
Jouni Malinen
3f63614f18 nl80211: Clean up nl80211_scan_common() to use nl80211_cmd_msg()
This helper function had not used the nl80211_set_iface_id() helper, but
there is no reason why it couldn't re-use the same helper as other
places using nl80211_cmd_msg().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:18:51 +02:00
Jouni Malinen
95376e1a99 nl80211: Use nl80211_iface_msg() helper
Use the helper function to replace places that use nlmsg_alloc(),
nl80211_cmd(), and ifindex.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:18:51 +02:00
Jouni Malinen
13f83980f0 nl80211: Use nl80211_bss_msg() helper
Use the helper function to replace places that use nlmsg_alloc(),
nl80211_cmd(), and either bss->ifindex or if_nametoindex(bss->ifname).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:18:46 +02:00
Jouni Malinen
a3249fdfb8 nl80211: Use nl80211_cmd_msg() for P2P Device operations
bss->wdev_id_set is set for the non-detdev P2P Device, so
nl80211_cmd_msg() can be used as-is for these cases as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:17:19 +02:00
Jouni Malinen
9725b78421 nl80211: Use nl80211_drv_msg() helper
Use the helper function to replace places that use nlmsg_alloc(),
nl80211_cmd(), and drv->ifindex.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 17:17:12 +02:00
Jouni Malinen
350acc354d nl80211: Move nl80211_set_iface_id() next its only remaining user
This function was in a bit strange location between struct family_data
and family_handler() definitions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 16:41:26 +02:00
Jouni Malinen
56f77852e5 nl80211: Use the new nl80211_cmd_msg() helper
This removes duplicated code for building nl80211 commands for a BSS.
This commit handles the functions that were already using
nl80211_set_iface_id().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 16:41:25 +02:00
Jouni Malinen
07c7757cb1 nl80211: Add nl80211_*_msg() helpers
These new functions can be used to both allocate and build a header for
most nl80211 commands.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 16:41:01 +02:00
Jouni Malinen
a862e4a38f nl80211: Continue getting rid of NLA_PUT* macro use
This gets rid of more NLA_PUT* macro uses in nl80211 to reduce the
number of functions that depend on the hidden behavior of jumping to the
nla_put_failure label.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 12:50:15 +02:00
Jouni Malinen
9589a91e0e nl80211: Get rid of NLA_PUT* macro use in capability checking
This gets rid of NLA_PUT* macro use in checking nl80211 capabilities to
reduce the number of functions that depend on the hidden behavior of
jumping to the nla_put_failure label.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 12:18:38 +02:00
Jithu Jance
0d4e3d1d13 nl80211: Ignore Connect failure for the previous association
Suppose there are two APs (AP1 & AP2) and user attempted to connect to
AP2 before the previous connection with AP1 could succeed. Now, if the
connection event comes for the older AP with failed status, we should
just ignore it as the wpa_supplicant state has moved to "ASSOCIATING"
with the new AP (AP2).

This is a similar to the case where a disconnection event is ignored for
a case where local disconnect request can cause the extra event to show
up during the next association process following that command.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2014-12-04 00:34:08 +02:00
Peng Xu
16689c7cfc hostapd: Allow ACS to be offloaded to the driver
Using QCA vendor command, allow ACS function to be offloaded to the
driver. Once channels are selected, hostapd is notified to perform OBSS
operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-03 22:31:53 +02:00
Vivek Natarajan
b685e2aab7 atheros: Cleanup atheros_raw_receive to process all management frames
Signed-off-by: Vivek Natarajan <nataraja@qti.qualcomm.com>
2014-12-02 16:20:35 +02:00
Jouni Malinen
0ecff8d7c3 Add hostapd driver_params config parameter
This is mainly for development testing purposes to allow driver_nl80211
behavior to be modified.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-29 13:24:42 +02:00
Jouni Malinen
ebd557288c Remove forgotten driver_test.c variables
hostapd was still providing couple of parameters that were used only in
the already removed driver_test.c framework.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-29 12:49:55 +02:00
Jouni Malinen
bd26031b4b wext: Fix non-WPA/WPA2 connection with extra IEs
The associate() handler was not prepared for params->wpa_ie containing
some other IEs than WPA/RSN IE and ended up configuring security policy
incorrectly for open networks if such IEs were present. Fix this by
using wpa_proto parameter instead of IEs to determine security policy
for driver configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-28 23:02:30 +02:00
Johannes Berg
d306df7919 wext: Add very basic status command support
Just to make the test framework happy, it uses the driver
status command to obtain the interface MAC address.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-28 23:02:29 +02:00
Jouni Malinen
f33c82d23e nl80211: Change iftype to station on leaving mesh
This is needed to make following operations behave as expected since
mesh iftypes may prevent various operations (e.g., registering Probe
Request frame RX). Use same design as leave_ibss does to handle this
consistently.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 17:12:47 +02:00
Jouni Malinen
7a94120ea9 nl80211: Clear ignore_if_down_event if interface is up
It was possible for the ignore_if_down_event flag to remain set in some
cases where interface mode change required the interface to be set down
temporarily. If that happened, the following rfkill interface down could
have been ignored and device could have been left trying to scan or
connect (which would all fail due to the interface beign down). Clean
this up by clearing the ignore_if_down_event flag on the interface down
event regardless of whether the interface is up at the time this event
is processed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 14:59:28 +02:00
Jouni Malinen
8997613c90 nl80211: Fix br_ifindex storing when hostapd creates the bridge
Commit 6c6678e7a4 ('nl80211: Make
br_ifindex available in i802_bss') did not cover the case where
i802_check_bridge() ends up creating the bridge interface. That left
bss->br_ifindex zero and prevented neighbor addition. Extend that
functionality to update br_ifindex once the bridge netdev has been
added.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-26 01:16:35 +02:00
Andrei Otcheretianski
7dc0338806 nl80211: Register Link Measurement Request Action frame
Add link measurement request to registration of Action frames to be
handled by wpa_supplicant if the driver supports TX power value
insertation.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-11-22 21:38:30 +02:00
Assaf Krauss
2526ccd95a nl80211: Register Neighbor Report Response Action frame
Add Neighbor Report Response Action frame to registration of Action
frames to be handled by wpa_supplicant.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:16:25 +02:00
Assaf Krauss
58162adf06 nl80211: Populate RRM flags in nl80211 driver
Set the RRM capability flags, based on the capabilities reported
by the underlying driver.

In addition, upon connection, notify the underlying driver regarding
RRM support.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:06:32 +02:00
Assaf Krauss
0dc957b93d driver: Add RRM-related definitions to driver interface
Add definitions for RRM (Radio Resource Measurement) support:
1. Flags that specify the RRM capabilities of the underlying driver
2. Flag for RRM in Capability Info field in Management frames
3. Indication in association parameters regarding an RRM connection

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:05:55 +02:00
Jouni Malinen
e503861f4d nl80211: Do not try to change STA capability on NL80211_CMD_SET_STATION
cfg80211 will reject any of these attributes regardless of whether the
values actually change or not when NL80211_CMD_SET_STATION is used for
something else than TDLS. This path is hit at least when setting up
mesh, so filter out the attributes from NL80211_CMD_SET_STATION to match
the rules in cfg80211.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-20 16:31:05 +02:00
Kyeyoon Park
ed4ddb6d77 AP: Extend the BSS bridge neighbor entry management to support IPv6
This allows adding/deleting an IPv6 neighbor entry to/from the bridge,
to which the BSS belongs. This commit adds the needed functionality in
driver_nl80211.c for the Linux bridge implementation. In theory, this
could be shared with multiple Linux driver interfaces, but for now, only
the main nl80211 interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-11-19 16:23:38 +02:00
Jouni Malinen
01b24c52df wired: Fix deinit path to unregister eloop read_sock
The previous version was leaving behind registered eloop socket
instances.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-17 00:57:15 +02:00
Moshe Benji
dfa8787833 nl80211: Implement add_ts/del_ts ops
Add ops to notify about TSPECs to add/remove. Additionally, subscribe to
ADDTS/DELTS Action frames to be able to process WMM AC Action frames.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 21:21:22 +02:00
Moshe Benji
471cd6e10c WMM AC: Add add_tx_ts and del_tx_ts driver ops
Add add_tx_ts() and del_tx_ts() ops to notify the driver about
TSPEC add / delete.

Additionally, add wmm_ac_supported flag to indicate
whether the driver supports WMM AC.

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-11-16 20:47:36 +02:00
Eliad Peller
7e0e10693a nl80211: Parse WMM parameters on association
Set the relevant WMM parameters in the assoc_data event.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-11-16 20:19:04 +02:00
Eliad Peller
0f14a44e6b drivers: Add WMM parameters to association event data
The WMM parameters will be used later for setting default tspec values.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-11-16 20:16:58 +02:00
Jouni Malinen
d308d1a899 Sync with wireless-testing.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2014-11-11.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 20:08:00 +02:00
Jason Mobarak
5cfb672dde mesh: Enable mesh HT mode
Add a new option "mesh_ht_mode" that specifies the HT mode for the
mesh, with this option on, mesh beacons, actions frames, and probe
responses with include the appropriate HT information elements.

[original implementation by Chun-Yeow Yeoh <yeohchunyeow@gmail.com>]
[some fixes by Masashi Honma <masashi.honma@gmail.com>]
Signed-off-by: Ashok Nagarajan <ashok.dragon@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
2014-11-16 19:43:11 +02:00
Dmitry Shmidt
88cb27c7a5 hostapd: Add wowlan_triggers config param
New kernels in wiphy_suspend() will call cfg80211_leave_all() that will
eventually end up in cfg80211_stop_ap() unless wowlan_triggers were set.
For now, use the parameters from the station mode as-is. It may be
desirable to extend (or constraint) this in the future for specific AP
mode needs.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-11-16 17:09:11 +02:00
Ilan Peer
f03996565a nl80211: Fix Android compilation by adding include for fcntl.h
This is needed for fcntl() at least with Android KK.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-16 17:09:11 +02:00
Jouni Malinen
666497c8e6 Suite B: Add AKM 00-0F-AC:11
This adds definitions for the 128-bit level Suite B AKM 00-0F-AC:11. The
functionality itself is not yet complete, i.e., this commit only
includes parts to negotiate the new AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 13:20:51 +02:00
Jouni Malinen
68ee1cdca0 Remove unused EVENT_MLME_RX
This was used in driver_test.c, but that driver wrapper has been removed
and there are no remaining or expected users for EVENT_MLME_RX.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 19:31:23 +02:00
Jouni Malinen
0f812c993b Remove unused EVENT_FT_RRB_RX
This was used in hostapd driver_test.c, but that driver wrapper has been
removed and there are no remaining or expected users for
EVENT_FT_RRB_RX.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 19:27:48 +02:00
Jouni Malinen
f21495ad38 madwifi: Remove obsolete madwifi driver interface
The MadWifi project is not active anymore and the last release happened
in early 2008. As such, there is no remaining justification for
maintaining the madwifi-specific driver interface for hostapd either.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 16:15:29 +02:00
Jouni Malinen
10bbe8b8ed nl80211: Fix a copy-paste error in key offload management
Commit b41f26845a ('Add support for
offloading key management operations to the driver') used incorrect
variable for determining the KCK length. This does not get triggered in
normal use cases since KCK and KEK are always included and of the same
length (in currently supported key management cases). Anyway, this needs
to be fixed to check the correct attribute. (CID 74491)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-28 01:41:57 +02:00
Kyeyoon Park
7565752d47 AP: Add support for setting bridge network parameter
This allows setting a network parameter on the bridge that the BSS
belongs to.

This commit adds the needed functionality in driver_nl80211.c for the
Linux bridge implementation. In theory, this could be shared with
multiple Linux driver interfaces, but for now, only the main nl80211
interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Kyeyoon Park
73d2294fbe AP: Add support for setting bridge port attributes
This allows setting a bridge port attribute. Specifically, the bridge
port in this context is the port to which the BSS belongs.

This commit adds the needed functionality in driver_nl80211.c for the
Linux bridge implementation. In theory, this could be shared with
multiple Linux driver interfaces, but for now, only the main nl80211
interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Kyeyoon Park
71103bed42 AP: Add support for IPv4 neighbor entry management to the BSS bridge
This allows adding/deleting an IPv4 neighbor entry to/from the bridge,
to which the BSS belongs. This commit adds the needed functionality in
driver_nl80211.c for the Linux bridge implementation. In theory, this
could be shared with multiple Linux driver interfaces, but for now, only
the main nl80211 interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Kyeyoon Park
6c6678e7a4 nl80211: Make br_ifindex available in i802_bss
Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Jouni Malinen
159a17916f nl80211: Move more event processing into driver_nl80211_event.c
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
8a906d1251 nl80211: Move event handling into a separate file
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
0fafeb5454 nl80211: Move capability determination into a separate file
This moves significant amount of code away from large driver_nl80211.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
906bc4c7d3 nl80211: Move QCA DFS offload capability determination to init time
There is no need to fetch this capability for each get_capa() call.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
981cf85a41 nl80211: Move AP monitor interface handling to a separate file
This moves the old monitor interface design to driver_nl80211_monitor.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
f3407c66c2 nl80211: Make some helper functions non-static
This allows more functionality to be moved to separate files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
70a96c8116 nl80211: Move most of the Android code into a separate file
This moves most of the Android specific implementation from
driver_nl80211.c to driver_nl80211_android.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:54:56 +02:00
Jouni Malinen
1474e6e917 nl80211: Move definitions into separate header files
This is an initial step in starting to split the large driver_nl80211.c
implementation into somewhat smaller parts.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:03:24 +02:00
Jouni Malinen
392dfd37e8 nl80211: Store externally managed bridge name in driver status
This makes it easier to figure out from hostapd control interface
whether an interface had been added to a bridge externally at the time
hostapd interface was enabled or if the interface gets added during
hostapd operations.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 11:27:31 +02:00
Ilan Peer
9bc5cfa338 nl80211: Clear beacon_set when deleting a beacon from deinit_ap()
When a beacon was deleted from the kernel in
wpa_driver_nl80211_deinit_ap(), bss->beacon_set was not cleared so
restarting the AP again was not possible.

Fix this by clearing the variable once the beacon was deleted.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-26 01:24:03 +03:00
Ilan Peer
ea6bf29ea3 nl80211: Add indoor only and GO concurrent flags
Add the following channel flags:

* INDOOR_ONLY: The channel can be used if and only if there is a clear
  assessment that the device is operating in an indoor environment, i.e.,
  it is AC power.

* CONCURRENT_GO: The channel can be used for instantiating a GO if and
  only if there is an additional station interface that is currently
  connected to an AP on the same channel or on the same U-NII band
  (assuming that the AP is an authorized master).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-26 01:23:46 +03:00
Ilan Peer
0a44358055 wpa_supplicant: Use the 'no_ir' notation
Use the 'no_ir' notation instead of the 'passive scan' and
'no_ibss' notations to match the earlier change in nl80211.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-26 01:23:43 +03:00
Thomas Pedersen
476e6bb68d mesh: Add mesh mode config option
Modify network mode to support mode number 5 when CONFIG_MESH is
enabled.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Thomas Pedersen <thomas@noack.us>
2014-10-25 17:45:35 +03:00
Bob Copeland
5551bc9cb2 nl80211: Do not try to change supported rates
For mesh mode to work properly, set supported rates only once.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 15:54:57 +03:00
Bob Copeland
7a228b5c3f nl80211: Add STA flag WPA_STA_AUTHENTICATED
This is needed for managing STA entries for mesh use cases.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 15:54:47 +03:00
Bob Copeland
7c7e7877fc nl80211: Add plink_action_field to hostapd_sta_add_params
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 15:54:38 +03:00
Bob Copeland
0d391b03e7 nl80211: Reject deauth/disassoc for mesh interface
sta_info call these to send out the disassoc and deauth frame
which are both not relevent to mesh. So don't send them.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 13:47:48 +03:00
Bob Copeland
afb0550a39 nl80211: Register to receive mesh frames
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-25 13:47:12 +03:00
Jouni Malinen
aed8d4d1ff nl80211: Write channel type in debug log on channel switch event
This makes it easier to understand what kind of channel switch was
indicated by the driver.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 11:28:56 +03:00
Eliad Peller
da1080d721 nl80211: Advertise and configure SMPS modes
Advertise static/dynamic SMPS mode support (according to the wiphy
feature bits) and pass the configured smps_mode when starting the AP.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-10-24 01:29:08 +03:00
Eliad Peller
8f461b50cf HT: Pass the smps_mode in AP parameters
The driver needs to know what SMPS mode it should use.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-10-24 01:27:31 +03:00
Eliad Peller
04ee647d58 HT: Let the driver advertise its supported SMPS modes for AP mode
Add smps_modes field, and let the driver fill it with its supported SMPS
modes (static/dynamic). This will let us start an AP with specific SMPS
mode (e.g., dynamic) that will allow it to reduce its power usage.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-10-24 01:25:29 +03:00
Chet Lanctot
b41f26845a Add support for offloading key management operations to the driver
This commit introduces a QCA vendor command and event to provide an
option to use extended versions of the nl80211 connect/roam operations
in a way that allows drivers to offload key management operations to the
driver/firmware.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-23 18:38:50 +03:00
Johannes Berg
97752f7930 Revert "nl80211: Do not indicate P2P_DEVICE support by default"
This reverts commit 851b0c5581.

The kernel now has full support for this (and it is turned off
by default for hwsim) so wpa_supplicant should really go back
to autodetecting this so clients don't have to figure out what
to do.

Also add a debug message stating that P2P_DEVICE support is used.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-22 10:54:02 +03:00
Bob Copeland
a52024c976 nl80211: Add new peer candidate event for mesh
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
7e31703e4d nl80211: Add support for sta_add flags_mask
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
6c1664f605 nl80211: Add new commands to support mesh interfaces
Create init_mesh, mesh_join, and mesh_leave actions to kernel.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
24bd4e0be5 nl80211: Add driver flag to indicate mesh support
Convert the driver flags variable to u64 since there was no room for
more flags.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Jouni Malinen
54a800dd51 netlink: Fix RTM_SETLINK padding at the end of the message
While the kernel seems to have accepted the message to set linkmode and
operstate without the final attribute getting padded to 32-bit length,
it is better to get this cleaned up to match expected format. The double
NLMSG_ALIGN() followed by RTA_LENGTH() did not make much sense here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 19:27:16 +03:00
Jouni Malinen
3eafc494d8 Fix CONFIG_NO_SCAN_PROCESSING=y build
ht_supported() was used but not defined in such a case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 17:02:23 +03:00
Jouni Malinen
93da049851 nl80211: Be more consistent with linux_set_iface_flags() result
Check the return value and write a debug message if this operation
failes (CID 74146).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 18:43:30 +03:00
Jouni Malinen
01b3bbfc66 test: Remove driver_test.c
The driver_test.c driver wrapper (-Dtest in wpa_supplicant and
driver=test in hostapd) was previously used for testing without real
Wi-Fi hardware. mac80211_hwsim-based tests have practically replaced all
these needs and there has been no improvements or use for driver_test.c
in a long while. Because of this, there has not really been any effort
to maintain this older test tool and no justification to change this
either. Remove the obsoleted test mechanism to clean up the repository.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 17:46:04 +03:00
Jouni Malinen
59d7148ad7 nl80211: Provide subtype and reason code for AP SME drivers
This allows drivers that implement AP SME internally to generate a
Deauthentication or Disassociation frame with the specified reason code.
This was already done with drivers that use hostapd/wpa_supplicant for
AP SME.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-10 20:05:37 +03:00
Janusz Dziedzic
4ec68377ef wpa_supplicant: Use hostapd_freq_params in assoc_params
Use hostapd_freq_params instead of simple frequency parameter for driver
commands. This is preparation for IBSS configuration to allow use of
HT/VHT in IBSS.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-10-04 18:43:42 +03:00
Dan Williams
3e0272ca00 nl80211: Re-read MAC address on RTM_NEWLINK
Commit 97279d8d (after hostap-2.0) dropped frame events from foreign
addresses. Unfortunately this commit did not handle the case where the
interface's MAC address might be changed externally, which other
wpa_supplicant code already handled. This causes the driver to reject
any MLME event because the address from the event doesn't match the
stale address in the driver data.

Changing an interface's MAC address requires that the interface be
down, the change made, and then the interface brought back up. This
triggers an RTM_NEWLINK event which driver_nl80211.c can use to
re-read the MAC address of the interface.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-10-04 16:41:20 +03:00
Jouni Malinen
5dfbd725a9 nl80211: Add get_bss_ifindex() helper
This can be used to fetch a BSS entry based on interface index.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 16:21:03 +03:00
Arik Nemtsov
984dadc23a TDLS: Set the initiator during tdls_mgmt operations
Some drivers need to know the initiator of a TDLS connection in order
to generate a correct TDLS mgmt packet. It is used to determine
the link identifier IE. Pass this information to the driver.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2014-10-03 11:52:21 +03:00
Jouni Malinen
01cb5df20c Sync with wireless-testing.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2014-10-02.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-03 11:39:27 +03:00
Ilan Peer
ca3c6b4da7 nl80211: Fix compatibility with older version of libnl
Commit 97ed9a06df ('nl80211: Remove bridge
FDB entry upon sta_remove()') used nl_sock and nl_socket_* functions
which are not compatible with older versions of libnl. Fix this.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-03 11:34:51 +03:00
Kyeyoon Park
97ed9a06df nl80211: Remove bridge FDB entry upon sta_remove()
The FDB entry removal ensures that the traffic destined for a
disassociated station's MAC address is no longer forwarded from the
bridge to the BSS.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-09-29 13:10:13 +03:00
Janusz Dziedzic
dbdc9a1d48 nl80211: Fix memory leak on start radar detection error path
Free nlmsg if failing to start radar detection.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-09-28 11:03:48 +03:00
Janusz Dziedzic
ed8e005973 hostap: nl80211 use nl80211_put_freq_params
Use nl80211_put_freq_params when it possible. Remove
duplicated code.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-09-27 21:47:40 +03:00
Jouni Malinen
fee354c74d nl80211: Add command for changing local MAC address
This can be used to allow wpa_supplicant to control local MAC address
for connections.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 19:11:24 +03:00
Jouni Malinen
b497a21267 nl80211: Ignore auth/assoc events when testing driver-SME
Previously, extra connect/roam events were ignored when user space SME
was used to avoid confusing double events for association. However,
there was no matching code for ignoring auth/assoc events when using
driver SME. Such events would not normally show up since the driver SME
case would not generated them. However, when testing forced connect
command with force_connect_cmd=1 driver param, these events are
indicated.

Ignore the extra events in testing cases to make the hwsim test cases
match more closely the real code path for driver SME. In addition, this
resolves some test case failures where double association event could
end up causing a failure, e.g., when doing PMKSA caching in
pmksa_cache_oppurtunistic_connect.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:12:41 +03:00
Dan Williams
7a4a93b959 dbus: Add SignalPoll() method to report current signal properties
Analogous to the control interface's SIGNAL_POLL request.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-09-13 17:21:54 +03:00
Jouni Malinen
0800f9ee6c nl80211: Add roaming policy update using QCA vendor command
This allows updating roaming policy for drivers that select the BSS
internally so that wpa_supplicant (based on bssid parameter
configuration) and the driver remain in sync.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-11 15:59:42 +03:00
Jouni Malinen
0ef023e478 Add support for driver command to update roaming policy
The network block bssid parameter can be used to force a specific BSS to
be used for a connection. It is also possible to modify this parameter
during an association. Previously, that did not result in any
notification to the driver which was somewhat problematic with drivers
that take care of BSS selection. Add a new mechanism to allow
wpa_supplicant to provide a driver update if the bssid parameter change
for the current connection modifies roaming policy (roaming
allowed/disallowed within ESS).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-11 15:59:42 +03:00
Jouni Malinen
0cd9846c63 nl80211: Print debug info on STA flag changes
This makes it easier to follow how kernel STA flags are managed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-11 11:25:04 +03:00
Eduardo Abinader
3ee18569f5 nl80211: Register eloop after hs20 action frame
Even when hs20 action frame is unable to be registered,
for whatever reason, it should be possible to register
event handle for received driver messages. This patch also
avoids a segmentation fault, when p2p and hs20 were enabled
and GO NEG was unable to create p2p iface, the destroy eloop
was crashing by reading an invalid handle.

Signed-off-by: Eduardo Abinader <eduardo.abinader@openbossa.org>
2014-09-07 19:22:49 +03:00
Jouni Malinen
f2e9083549 nl80211: Add more RTM_NEWLINK/DELLINK debug messages
This makes it easier to figure out what operations are generating each
RTM_DELLINK message.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-01 16:18:01 +03:00
Jouni Malinen
728ff2f469 nl80211: Fix RTM_DELLINK processing for bridge events
When a netdev is removed from a bridge, RTM_DELLINK message is received
with ifname (IFLA_IFNAME) pointing to the main netdev event though that
netdev is not deleted. This was causing issues with P2P GO interface
getting disabled when the netdev was removed from a bridge. Fix this by
filtering RTM_DELLINK events that are related to the bridge when
indicating interface status changes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-01 16:14:07 +03:00
Avinash Patil
b8d87ed296 nl80211: Disable Probe Request reporting for static AP during deinit
Disable Probe Request reporting for statically created AP interfaces
during de-initialization. We will enable it again while starting AP
operations.

Signed-off-by: Avinash Patil <avinashapatil@gmail.com>
2014-08-10 11:22:30 +03:00
Avinash Patil
bf144cf649 nl80211: Do not change iftype for static AP interface
Some devices have limitations which do not allow changing virtual
interface mode from AP to station or vice versa. To work around this,
check if such AP interface is not dynamic. If such an interface is
enumarated, just set ifmode to AP and avoid setting nlmode to default
station mode on deinit.

Signed-off-by: Avinash Patil <avinashapatil@gmail.com>
2014-08-10 11:19:11 +03:00
Jean-Marie Lemetayer
61157afb1c wext: Add signal_poll callback
Add a basic implementation of a signal_poll callback for wext drivers.

Signed-off-by: Jean-Marie Lemetayer <jeanmarie.lemetayer@gmail.com>
2014-08-10 11:07:05 +03:00
Cedric IZOARD
6d00ab0430 nl80211: Ensure nl_preq unregistration on driver deinit
When driver interface is destroyed (via wpa_driver_nl80211_deinit) the
"preq" nl socket isn't always deleted but the callback struct associated
is. After the interface is destroyed we may still get event on the
socket but as the callback has been freed this will cause wpa_supplicant
to crash.

This patch ensures that the "preq" socket is destroyed when destroying
the interface.

Signed-off-by: Cedric IZOARD <cedricx.izoard@intel.com>
2014-07-08 16:01:43 +03:00
Michal Kazior
5841958f26 hostapd: Use channel switch fallback on error
It's worth giving a try to fallback to re-starting BSSes at least once
hoping it works out instead of just leaving BSSes disabled.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
2014-06-28 11:13:11 +03:00
Michal Kazior
6782b6846b hostapd: Move CSA parameters to hostapd_data
This prepares CSA structure and logic in hostapd for multi-BSS channel
switching.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2014-06-28 11:02:39 +03:00
Christopher Wiley
3c5d34e30b Change channel before IBSS associations
Fix a bug where changing the mode of the interface to IBSS
fails because the interface is sitting on a channel where IBSS is
disallowed because of a previous association.

Signed-off-by: Christopher Wiley <wiley@chromium.org>
2014-06-28 10:46:33 +03:00
Christopher Wiley
ebffdbc493 nl80211: Refactor mode switch logic
In preparation for another wrinkle around switching into IBSS mode,
refactor existing mode switch logic for simplicity at the expense
of some brevity.

Signed-off-by: Christopher Wiley <wiley@chromium.org>
2014-06-28 10:42:05 +03:00
Pontus Fuchs
f95a4524c2 nl80211: Improve debug output by printing SA and DA in frames
Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
2014-06-22 00:54:06 +03:00
Pontus Fuchs
dedfa440ed Print frame type name in debug output
"stype=4" becomes "stype=4 (WLAN_FC_STYPE_PROBE_REQ)" etc.

Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
2014-06-22 00:51:39 +03:00
Johannes Berg
57a8f8af38 nl80211: Use low-priority scan for OBSS scan
Some drivers may support low-priority scans, if they do then
use that for OBSS scanning.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-22 00:47:06 +03:00
Jithu Jance
d1bb7aeda4 nl80211: Fix non-hostapd interface addition to not call add_ifidx()
Commit b36935be1a ('nl80211: Fix EAPOL
frames not being delivered') and commit
147848ec4d ('nl80211: Do not add all
virtual interfaces to drv->if_indices') were not fully in sync and it
was possible for some non-hostapd use cases to end up adding undesired
ifindexes into the list of interfaces from which events and EAPOL frames
are processed on the parent interface. This could result, e.g., in P2P
Device management interface on getting unexpected events, including
RTM_NEWLINK event that could end up getting interpreted as an
indication of the interface being down and unavailable.

Make both add_ifidx() calls use the same criteria for adding interfaces
to the local list. This is not really a complete solution, but it is
good enough for now to fix the most visible side effects of this issue.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2014-06-17 01:35:07 +03:00
Jouni Malinen
ac79fcfa76 wext: Verify set_ssid results consistently (CID 62842)
Note in debug log if SSID clearing to stop pending cfg80211 association
attempts fail.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-14 12:32:53 +03:00
Ashok Kumar Ponnaiah
3dacd3ece7 atheros: Add support for new GCMP/CCMP/CMAC/GMAC cipher suites
Extend the set of supported cipher suites to include CCMP-256, GCMP,
GCMP-256, CMAC-256, GMAC, and GMAC-256 when ATH_GCM_SUPPORT=y is set in
the build configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-09 19:21:48 +03:00
Jithu Jance
d3d048310c nl80211: Work around error case prints for nl_recvmsgs on Android
I got the below prints on a particular Android platform:

I/wpa_supplicant( 2637): nl80211: send_and_recv->nl_recvmsgs failed: 20
I/wpa_supplicant( 2637): nl80211: send_and_recv->nl_recvmsgs failed: 20

In JellyBean libnl_2 code, I see that the nl_recvmsgs returns postive values
too. In some cases, nl_recvmgs return the output of nl_recv function. nl_recv
function can return Number of bytes read, 0 or a negative error code.

Looks like this positive return value for nl_recvmsgs may be specific to
Android. While this is not how the API is supposed to work, this does no
harm with upstream libnl which returns only 0 or -1 from the function.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2014-06-01 11:25:02 +03:00
Michal Kazior
ea39367c1b nl80211: Fix wpa_driver_nl80211_if_add() failure paths
Make sure to not remove interfaces that were not created by
hostapd/wpa_supplicant. This was already done on number of the error
paths, but not all.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
2014-05-31 13:43:27 +03:00
Jouni Malinen
147848ec4d nl80211: Do not add all virtual interfaces to drv->if_indices
Commit 04eff7d5ba or something around that
timeframe may have caused a regression on how drv->if_indices gets used
with wpa_supplicant. Most (curretly likely all) wpa_supplicant virtual
interface use cases should not actually use this. This could result in
issues with P2P group interfaces delivering events to incorrect
interface (parent rather than the group interface). The previous commit
removed some of the issues, but more complete fix is to undo some of
those merged hostapd/wpa_supplicant operations.

Filter add_ifidx() uses based on hostapd vs. wpa_supplicant and iftype
to get closer to the earlier wpa_supplicant behavior for the driver
events from virtual interfaces.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-27 18:47:41 +03:00
Jouni Malinen
de88430311 nl80211: Fix del_ifidx() with mixed parent interface cases
It is possible for a virtual interface to be added and removed by
different parent interfaces. This can happen, e.g., with P2P group
interfaces if the P2P parent interface does not happen to be the first
entry in the wpa_supplicant global interface list. That first entry is
used to remove the group interface while the addition would have
happened with the dedicated P2P management interface.

This can result in the interface that added a new virtual interface
getting stuck with an obsolete ifindex value in the drv->if_indeces list
and as such, deliver some extra events to incorrect destination wpa_s
instance. In particular, this can result in INTERFACE_DISABLED event
from deletion of a P2P group interface getting delivered incorrectly to
the parent wpa_s instance which would disable that interface even though
the interface remains in enabled state.

Fix this by clearing the removed interface from all if_indeces lists
instead of just the one that was used to delete the interface. This is
the simplest approach since the ifindex is unique and there is no need
to track which interface added the new virtual interface to always hit
the same one when removing the interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-27 18:16:58 +03:00
Jithu Jance
8802326ff9 nl80211: Indicate SHA256-based AKM suites in CONNECT/ASSOCIATE
Previously, the NL80211_ATTR_AKM_SUITES was skipped if either of these
SHA256-based AKMs was negotiated.

Signed-off-by: Jithu Jance <jithu@broadcom.com>
2014-05-21 23:48:00 +03:00
Jouni Malinen
c7caac56b7 nl80211: Fix send_frame freq for IBSS
bss->freq was not updated for IBSS, so whatever old value was stored
from a previous AP mode operation could end up having been used as the
channel when trying to send Authentication frames in an RSN IBSS. This
resulted in the frame not sent (cfg80211 rejects it) and potentially not
being able to re-establish connection due to 4-way handshake failing
with replay counter mismatches. Fix this by learning the operating
channel of the IBSS both when join event is received and when a
management frame is being transmitted since the IBSS may have changed
channels due to merges.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:49 +03:00
Hu Wang
8d0dd4eebc Add macsec_qca driver wrapper
This is based on driver_wired.c and provides driver interface for the
QCA MACsec driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-09 20:42:44 +03:00
Hu Wang
7baec808ef MACsec: Add driver_ops
This defines new driver_ops to be used with MACsec.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-09 20:05:28 +03:00
Chandrasekaran, Manishekar
ea40a575ae nl80211: Use max associated STAs information in AP mode
Propagate max associated STAs in AP mode advertised by the driver to
core wpa_supplicant implemantion. This allows wpa_supplicant to update
the P2P GO group limit information automatically without having to
configure this limit manually. The information (if available) is also
used in the generic AP implementation to control maximum number of STA
entries.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-09 17:12:19 +03:00
Eliad Peller
e4fa8b120b wpa_supplicant: Add Wake-on-WLAN configuration support
Add a new wowlan_triggers option to wpa_supplicant.conf. The triggers in
this key will be used to configure the kernel wowlan configuration.

For now, support only simple flags. More complex triggers can be added
later on.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-04-29 18:59:12 +03:00
Dmitry Shmidt
959214b260 Android: Use extended P2P functionality (ANDROID_P2P) for all vendors
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-04-29 18:59:12 +03:00
Ilan Peer
52f5877afa nl80211: Take ownership of dynamically added interfaces
Indicate to cfg80211 that interfaces created by the wpa_supplicant
or hostapd are owned by them, and that in case that the socket that
created them closes, these interfaces should be removed.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-04-29 18:59:12 +03:00
Eduardo Abinader
e390df0553 nl80211: Cancel rfkill timeout on deinit
Got segfault, when freeing drv and there exists registered timeout for
blocked rfkill. This patch adds cancel timeout to avoid this.

Signed-off-by: Eduardo Abinader <eduardo.abinader@openbossa.org>
2014-04-29 17:55:27 +03:00
Jouni Malinen
0bceb8d6f4 Make dl_list_first() and dl_list_last() uses easier for static analyzers
The previous check for dl_list_len() or having an entry from the list is
sufficient, but some static analyzers cannot figure out that
dl_list_first() and dl_list_last() will return non-NULL in this type of
cases. Avoid invalid reports by explicitly checking for NULL.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
13a524a30d nl80211: Remove unnecessary wpa_driver_nl80211_set_freq() wrapper
This is not of any real use anymore with nl80211_set_channel() taking
care of channel setting operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 12:52:10 +03:00
Peng Xu
e87ef7517e nl80211: Add support for changing AP mode channel bandwidth
Configure driver with the new channel parameters (mainly, HT 20/40 MHz
bandwidth changes) as part of set_ap().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 12:52:09 +03:00
Jouni Malinen
30575183f6 Sync with mac80211-next.git nl80211.h
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:09 +03:00
Peng Xu
196c9c7cd2 Make channel parameters available in set_ap() driver operation
This provides information to allow the driver to be configured for
updated channel parameters, e.g., when dynamically changing HT20/HT40
bandwidth.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 12:16:51 +03:00
Jouni Malinen
0e80ea2c70 nl80211: Fix some coding style issues
Some trailing whitespace and spaces for indentation were present in the
driver wrapper and header files.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-25 19:27:07 +03:00
Jouni Malinen
a26582cb98 Make qca-vendor.h independent of other header files
Move the definitions that depended in common.h into a separate header
file so that qca-vendor.h can be copied and used as-is in other
projects.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-25 11:41:36 +03:00
Jouni Malinen
6d99bd8076 nl80211: Debug print HT/VHT capability override information
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-17 17:11:11 +03:00
Johannes Berg
bacb984b2d radiotap: Update radiotap parser to library version
Update the radiotap parser to the latest version of the
http://git.sipsolutions.net/radiotap.git/ library to get
parsing for vendor namespaces.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-13 23:49:59 +03:00
Jouni Malinen
142817b2f9 Add a wpa_supplicant ctrl_iface event for regdom changes
CTRL-EVENT-REGDOM-CHANGE event provides an external notification of
regulatory domain (and any driver channel list) changes.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 16:32:38 +03:00
Jouni Malinen
d6a36f3956 nl80211: Mask out deauth even after own deauth request
This was already done for the disconnect event, but
SME-in-wpa_supplicant case needs to do same with the deauth event to
avoid getting extra events during WPS disconnect-and-reconnect sequence.
This can speed up WPS processing by removing unnecessary failures or
retries due to the extra event being processed during the next
association attempt.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 11:39:49 +03:00
Felix Fietkau
83c4cb5217 nl80211: Handle multiple interface combinations for P2P
The first combination may allow single-channel concurrency for
P2P + managed, but there may be others that allow multi-channel
concurrency. Parse all of them to find the maximum number of channels.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
2014-04-11 19:22:00 +03:00
Abhishek Singh
9392c9be7a nl80211: Use LEAVE_IBSS with driver-based-SME
NL80211_CMD_LEAVE_IBSS was used only with wpa_supplicant-based SME.
Extend this to drivers that implement SME internally.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-10 19:51:51 +03:00
Janusz Dziedzic
bbbacbf2f8 DFS: Print CAC info in ctrl_iface STATUS command
Print CAC time and CAC left time in control interface STATUS command.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-03-28 23:02:45 +02:00
Maxime Bizon
5c9da160a5 nl80211: Set all BSS interfaces down when tearing down AP in MBSS mode
If the interface was not added by hostapd, it could have been left up
when disabling the AP.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
2014-03-27 16:45:25 +02:00
Sunil Dutt
96ecea5eb1 Pass TDLS peer capability information in tdls_mgmt
While framing the TDLS Setup Confirmation frame, the driver needs to
know if the TDLS peer is VHT/HT/WMM capable and thus shall construct the
VHT/HT operation / WMM parameter elements accordingly. Supplicant
determines if the TDLS peer is VHT/HT/WMM capable based on the presence
of the respective IEs in the received TDLS Setup Response frame.

The host driver should not need to parse the received TDLS Response
frame and thus, should be able to rely on the supplicant to indicate
the capability of the peer through additional flags while transmitting
the TDLS Setup Confirmation frame through tdls_mgmt operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-27 15:18:48 +02:00
Jouni Malinen
78cd7e69de Sync with wireless-testing.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2014-03-25.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-27 14:50:39 +02:00
Maxime Bizon
b36935be1a nl80211: Fix EAPOL frames not being delivered
When hostapd choose to reuse an existing interface, it does not add it
to the set of interfaces from which we accept EAPOL packets.

Make sure we always add it to that set.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
2014-03-26 16:37:42 +02:00
Jouni Malinen
6997f8baab nl80211: Set interface address even if using old interface
If an existing interface is allowed to be used, its address better be
updated to match the requested one.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-26 16:33:03 +02:00
Jouni Malinen
9b4d9c8bbc nl80211: Print if_indices list in debug log
This makes it easier to debug dynamic interface addition/removal.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-26 00:42:24 +02:00
Jouni Malinen
163f801ef2 nl80211: Indicate HS 2.0 OSEN AKM in connect/associate command
This allows drivers that build the WPA/RSN IEs internally to use similar
design for building the OSEN IE.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-25 18:33:21 +02:00
Amar Singhal
65d645ce43 nl80211: Fetch DFS offload capability from driver
This uses a QCA vendor extension to determine if the driver supports
fully offloaded DFS operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-22 21:20:32 +02:00
Jouni Malinen
1b5df9e591 nl80211: Do not indicate scan started event on scan_for_auth
The scan_for_auth workaround for cfg80211 missing a BSS entry for the
target BSS during authentication uses a single channel scan controlled
within driver_nl80211.c. This operation does not indicate
EVENT_SCAN_RESULTS to the upper layer code. However, it did report
EVENT_SCAN_STARTED and this resulted in the radio work protection code
assuming that an external program triggered a scan, but that scan never
completed. This resulted in all new radio work items getting stuck
waiting for this scan to complete.

Fix this by handling the scan_for_auth situation consistently within
driver_nl80211.c by filtering both the EVENT_SCAN_STARTED and
EVENT_SCAN_RESULTS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-18 22:48:44 +02:00
Jouni Malinen
e8d70a739b nl80211: Hide deauth event due to forced deauth-during-auth
If NL80211_CMD_AUTHENTICATE fails due to exiting authentication, forced
deauthentication is used to clear cfg80211 start and a new
authentication command is retried. This resulted in an extra
disconnection event getting delivered to the core wpa_supplicant code
and that could end up confusing state there, e.g., by clearing
connection parameters like wpa_s->key_mgmt and preventing the following
association from reaching proper COMPLETED state with open networks.

Fix this by hiding the unnecessary disconnection event when using the
deauth-for-auth workaround.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-11 20:02:23 +02:00
Moshe Benji
8c06db703d nl80211: Fix P2P Device handling when starting with RF-kill blocked
On RF-kill, we should not request the kernel to start a P2P device. In
addition, we should call i802_set_iface_flags() both for a P2P Device
interface and any other interface instead of calling a dedicated
function for each.

Signed-off-by: Moshe Benji <Moshe.Benji@intel.com>
2014-03-11 19:22:03 +02:00
Simon Wunderlich
1d91f504e4 hostapd: Process management frames only once per BSS
At least in nl80211, broadcast management frames like Probe Request
frames, may be processed multiple times per BSS if multi-BSS is active
and NL80211_CMD_FRAME event is used to deliver them. In the case of
Probe Request frames, hostapd will create multiple redundant Probe
Response frames which are problematic when many BSS are on one channel.

This problem is caused by driver_nl80211 generating an event for
wpa_supplicant_event() for each BSS, and hostapd_mgmt_rx() calls
ieee802_11_mgmt() for each BSS, too.

Fix this by processing broadcast events only for the BSS the driver
intended to. The behavior is not changed for drivers not setting a BSS.

Signed-hostap: Simon Wunderlich <simon@open-mesh.com>
2014-03-11 19:07:25 +02:00
Jouni Malinen
e6ef73f188 nl80211: Add debug print of KEY_DATA and KEY_SEQ
While these were already available from elsewhere in the debug log, it
is convenient to have the values also available at the location where
the actual nl80211 command is issued.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-11 14:59:15 +02:00
Jouni Malinen
8f05577d11 Configure beacon interval for IBSS command
wpa_supplicant already allowed beacon interval to be configured for AP
mode operations, but this was not passed to the driver for IBSS even
though the same parameter can used for that case. Add this for the
nl80211 driver interface to allow beacon interval to be controlled for
IBSS as well.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-06 23:09:20 +02:00
Moshe Benji
354c903f8e AP/GO interface teardown optimization
This commit adds an option to optimize AP teardown by leaving the
deletion of keys (including group keys) and stations to the driver.

This optimization option should be used if the driver supports stations
and keys removal when stopping an AP.

For example, the optimization option will always be used for cfg80211
drivers since cfg80211 shall always remove stations and keys when
stopping an AP (in order to support cases where the AP is disabled
without the knowledge of wpa_supplicant/hostapd).

Signed-off-by: Moshe Benji <moshe.benji@intel.com>
2014-03-05 23:57:02 +02:00
Jouni Malinen
6b9f7af651 nl80211: Extend the new vendor command for testing nl80211
CONFIG_TESTING_OPTIONS=y build of wpa_supplicant now allows arbitrary
cfg80211 commands to be performed through the new VENDOR ctrl_iface
command by using a special vendor_id ffffffff. The command identifier
(NL80211_CMD_*) is encoded as the subcmd and the attributes in the
hexformatted data area. Response attributes are returned as a hexdump.

For example, this shows a NL80211_CMD_FRAME and a response (cookie
attribute) on a little endian host:

wpa_cli -i wlan0 vendor ffffffff 59 080003004d0000000800260085090000....
0c00580000d7868c0388ffff

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-05 17:19:58 +02:00
Andrei Otcheretianski
819f096f5b nl80211: Fix RTM event handling for dynamic interfaces
When an interface is disabled through rtm event, wpa_supplicant's
EVENT_INTERFACE_DISABLED is generated, which in turn, may
completely destroy wpa_driver_nl80211_data struct (drv). This
scenario happens now when P2P GO interface is disabled. Since this
struct may be used later in this function it causes segmentation fault.

Fix it by trying to find drv again in the interface list after
wpa_supplicant's event handling.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-03-04 22:30:48 +02:00
Beni Lev
adef89480d nl80211: Add vendor command support
Add a callback to the driver interface that allows vendor specific
commands to be sent. In addition, a control interface command is added
to expose this new interface outside wpa_supplicant:

Vendor command's format:
VENDOR <vendor id> <sub command id> [<hex formatted data>]

The 3rd argument will be converted to binary data and then passed as
argument to the sub command.

This interface is driver independent, but for now, this is only
implemented for the nl80211 driver interface using the cfg80211 vendor
commands.

Signed-off-by: Beni Lev <beni.lev@intel.com>
2014-03-04 22:24:20 +02:00
Felix Fietkau
d0595b25b4 nl80211: Fix tearing down WDS STA interfaces
wpa_driver_nl80211_if_remove() checks bss->if_added before deleting an
interface, which is 0 for the first BSS. The only part of
wpa_driver_nl80211_if_remove() that should get called for WDS STA
interfaces is the call to nl80211_remove_iface(), which can be pulled in
here directly.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
2014-03-04 20:13:01 +02:00
Jouni Malinen
a8716d13bf roboswitch: Verify that register read succeeds before comparing result
If wpa_driver_roboswitch_read() fails before such comparison, the values
that are being compared are not initialized properly and as such, there
is not much point in comparing them either.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 17:15:12 +02:00
Jouni Malinen
d12eb581f9 test: Use more consistent NULL checking for associate ssid parameter
This was checked once against NULL, but not on the following uses.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 17:15:11 +02:00
Jouni Malinen
64abb725ba nl80211: Allow old r-o-c offchannel TX to be tested
no_offchannel_tx=1 driver parameter can now be used to force the older
remain-on-channel -based offchannel TX design to be used with
mac80211_hwsim. This can be used to increase test coverage with the
hwsim test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-02 10:35:34 +02:00
Kyeyoon Park
0052ce499a atheros: Add support for OSEN
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-01 00:38:04 +02:00
Jouni Malinen
a14896e8bb HS 2.0R2 AP: Add OSEN implementation
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:24 +02:00
Jouni Malinen
95a3ea9426 HS 2.0R2: Add WNM-Notification Request for Subscription Remediation
Subscription remediation notification WNM-Notification Request is now
shown in the following way in wpa_supplicant control interface:
<3>HS20-SUBSCRIPTION-REMEDIATION http://example.com/foo/

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:23 +02:00
Jouni Malinen
ae6f927258 nl80211: Add driver capability for GTK_NOT_USED
Many drivers support operation without GTK configured, but most (if any)
today do not advertise this. Handle this by skipping GTK cipher suite
configuration if the driver did not advertise support in order to work
around cfg80211 validation steps.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-26 01:24:22 +02:00
Jouni Malinen
bfb79dde63 nl80211: Show regulatory rule flags in debug output
These can be useful in understanding why some channels are disabled.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-25 13:55:07 +02:00
Ilan Peer
be24917df6 nl80211: Use nl80211_set_iface_id() to get hw features data
Use nl80211_set_iface_id() in wpa_driver_nl80211_get_hw_feature_data(),
as otherwise the function fails for a P2P Device interface (which does
not have a netdev associated with it).

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2014-02-14 19:30:27 +02:00
Marek Kwaczynski
8a45811638 hostapd: Add Operating Mode Notification support
Handle Operating Mode Notification received in (Re)Association Request
frames.

Signed-hostap: Marek Kwaczynski <marek.kwaczynski@tieto.com>
2014-02-14 19:30:05 +02:00
Dmitry Shmidt
7ac7fd43aa Add bssid/freq hint for driver-based BSS selection
This uses the new nl80211 attributes to allow the connect command to
provide bssid and freq hints to the driver without limiting roaming to
the specific BSS/frequency. This can be used by drivers that perform
internal BSS selection (WPA_DRIVER_FLAGS_BSS_SELECTION) as a candidate
for initial association.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-02-13 15:14:18 +02:00
Jouni Malinen
56ec49c540 Sync with wireless-testing.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2014-02-12.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-02-13 14:35:01 +02:00
Yun Park
72e7fb3fd9 nl80211: Fix regression in returning to AP mode after scan
Commit b1f625e0d8 extended
ap_scan_as_station to be able to distinguish between AP and P2P GO
iftypes. However, it did this in a way that completely lost the original
mode because drv->nlmode had already been replaced with the station
mode. Fix this by storing the correct old mode.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-05 22:53:59 +02:00
Jouni Malinen
8597ebdbd4 Fix hostapd segfault on beacon hint event
Commit 795baf773f ('hostapd: Filter
channel list updated events after country code change') uses the
EVENT_CHANNEL_LIST_CHANGED data pointer, but it updated only one of the
callers to provide that data. NL80211_CMD_REG_BEACON_HINT event was
still sending the event without the initiator data and resulted in NULL
pointer dereference, e.g., if a scan was run while hostapd was running
and the driver was in world roaming state and enabled a channel for
active scans.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-02-03 19:34:59 +02:00
Masashi Honma
c69ed4dd49 bsd: Fix hostapd compiler warning
The hostapd compilation displays a below warning On NetBSD 6.1.2.

../src/drivers/driver_bsd.c:72:1: warning: 'get80211opmode' defined but not used

This patch solves it and moves other functions to appropriate position to
reduce #ifdef.

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2014-02-03 19:34:49 +02:00
Janusz Dziedzic
1412beeee9 nl80211: Show DFS region info in debug messages
Print DFS region info, if provided, when printing regulatory
information.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-01-30 14:10:25 +02:00
Johannes Berg
ff5e1d14af nl80211: Treat RSSI as part of each sched scan matchset
The original RSSI filter semantics for scheduled scan were
really confusing - a separate matchset was created, but it
wasn't actually treated as a separate matchset in the kernel
but rather used as the global RSSI value. The RSSI matchset
thus behaved like an RSSI filter outside of the matchsets,
being ANDed rather than ORed (as normal between matchsets.)

To make this less confusing, I changed the kernel API a bit
to actually treat the RSSI inside each matchset properly,
but keeping it compatible with the old approach by using a
matchset with only an RSSI value as the default for all the
other matchsets, and adding it as a separate matchset only
if it's the only one.

The proper way for wpa_supplicant to do this then would be
to add the RSSI to each SSID matchset, and only add another
matchset without SSID if there's none with.

However, to keep compatibility with older kernels, always
keep the non-SSID matchset and only add the RSSI to all the
other matchsets. This gets close to the desired behaviour,
the only difference would be that we shouldn't add the RSSI
matchset if there are others, but stays compatible with old
and new kernels, as new ones ignore the RSSI-only matchset
if there are others and those others have an RSSI.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2014-01-30 14:03:53 +02:00
Michal Kazior
4b0f2282cb nl80211: Fix channel switching with VHT80
It is possible for channel switch notification to be missing channel
type attribute. This is true at least for VHT80. This led to
iface->conf->secondary_channel being set to 0. This in turn made
subsequent DFS-triggered CSA to fail due to invalid frequency
parameters.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2014-01-30 13:58:48 +02:00
Shital Jaju
e28f39b7e9 nl80211: Verify that ifindex attribute is included in survey
This checks if the NL80211_ATTR_IFINDEX attribute is present before
trying to get the value of interface index.

Signed-hostap: Shital Jaju <shitalj@broadcom.com>
2014-01-30 13:44:07 +02:00
Arif Hussain
253f2e3795 P2P: Apply unsafe frequency rules to available channels
This adds a QCA vendor specific nl80211 event to allow the driver to
indicate a list of frequency ranges that should be avoided due to
interference or possible known co-existance constraints. Such
frequencies are marked as not allowed for P2P use to force groups to be
formed on different channels.

If a P2P GO is operating on a channel that the driver recommended not to
use, a notification about this is sent on the control interface and
upper layer code may decide to tear down the group and optionally
restart it on another channel. As a TODO item, this could also be changed
to use CSA to avoid removing the group.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 11:49:05 +02:00
Jouni Malinen
1682c62360 Add a header file defining QCA OUI and vendor extensions
This file is used as a registry of identifier assignments from the
Qualcomm Atheros OUI 00:13:74 for purposes other than MAC address
assignment. One of the first uses will be for nl80211 vendor
commands/events which is reason for the preparation change in
driver_nl80211.c

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-24 15:58:00 +02:00
Jouni Malinen
c5a64e2d51 GAS client: Use Protected Dual of Public Action frames with PMF
When GAS is used with PMF negotiated, Protected Dual of Public Action
frames are expected to be used instead of Public Action frames, i.e.,
the GAS/ANQP frames are expected to be encrypted. Conver Public Action
GAS queries to use Dual of Public Action frame if PMF has been
negotiated with the AP to which the frame is being sent.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-23 11:50:28 +02:00
Max Stepanov
080cc445df nl80211: Fix sizeof check in vendor command/event handling
Fix sizeof in a validity comparison of nl80211_vendor_cmd_info size. The
incorrect version happened to work on 64-bit builds due the structure
being eight octets, but this was incorrect and would not used with
32-bit builds.

Signed-hostap: Max Stepanov <Max.Stepanov@intel.com>
2014-01-22 19:30:20 +02:00
Sunil Dutt
efc64886b8 nl80211: Pass station supported channel and oper class info
Pass station supported channel and operating class information to kernel
for TDLS peers.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>x
2014-01-14 17:24:33 +02:00
Sunil Dutt
3ed97271ba TDLS: Pass peer's Supported channel and oper class info during sta_add
The information of the peer's supported channel and operating class
is required for the driver to do TDLS off channel operations with a
compatible peer. Pass this information to the driver when the peer
station is getting added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-14 17:24:33 +02:00
Jouni Malinen
bfdc2a3172 bsd: Fix NULL pointer dereference on error path
The error path in bsd_init() on struct bsd_driver_data allocation was
jumping to location where drv is dereferenced. That will crash and it is
easier to just return from the function since no cleanup steps are
needed in this case.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 15:58:01 +02:00
Masashi Honma
38bbd06ecf bsd: Prepare event buffer on init process
Currently these three steps runs for each event.
1. get buffer size via system
2. allocate a memory for event
3. free the memory

The wpa_supplicant receives 4 events from boot to be connected.
So this patch prepare the event buffer at the init process.

I have tested wpa_supplicant on NetBSD 6.1.2.
But I could not tested hostapd because I do not have AP enabled device.

Signed-hostap: Masashi Honma <masashi.honma@gmail.com>
2014-01-07 15:56:06 +02:00
Jouni Malinen
90a545ccba nl80211: Clean up netlink parsing and debug prints
This makes the RTM_NEWLINK, RTM_DELLINK, and operstate debug messages
easier to understand.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-07 10:45:12 +02:00
Andrei Otcheretianski
991aa9c73f nl80211: Move CS supported flag to wpa_driver_capa
Replace channel_switch_supported flag of the
wpa_driver_nl80211_data by WPA_DRIVER_FLAGS_AP_CSA inside
wpa_driver_capa.flags. It makes more sense and also can
be accessed by wpa_supplicant.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-01-07 10:45:12 +02:00
Jouni Malinen
dd43aaa509 Add helper functions for cloning and freeing scan parameters
Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-05 22:35:52 +02:00
Jouni Malinen
949938aadf Ask driver to report only new scan results if requested
If the BSS table within wpa_supplicant is flushed, request the driver to
flush its own scan result table during the next scan. This can avoid
unexpected old BSS entries showing up after BSS_FLUSH or FLUSH command
in cases where the driver may maintain its internal cache of scan
results (e.g., cfg80211 BSS table persists at least for 15 seconds).

In addition to doing this automatically on BSS_FLUSH/FLUSH, a new SCAN
command argument, only_new=1, can be used to request a manual scan
request to do same. Though, it should be noted that this maintains the
BSS table within wpa_supplicant. BSS_FLUSH followed by SCAN command can
be used to clear all BSS entries from both the driver and
wpa_supplicant.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 23:03:31 +02:00
Jouni Malinen
101bdc2e8c Remove forgotten notes about already removed driver wrappers
These old driver wrappers have been removed quite some time ago, but
some of the build configuration notes were still describing how they
are configured.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-02 10:23:30 +02:00
Jouni Malinen
17b79e65a9 nl80211: Initial support for vendor commands and events
Print into the debug log the list of vendor commands and events that the
driver supports. In addition, add a generic handler for vendor events.
This can be extended for each vendor/subcmd.

Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-01 23:47:35 +02:00
Jouni Malinen
fcc61230d1 Declare wpa_drivers in src/drivers/driver.h
This avoids some warnings from sparse.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:19:37 +02:00
Jouni Malinen
327b01d3d7 nl80211: Add driver param for forcing monitor and connect APIs
use_monitor=1 and force_connect_cmd=1 driver parameters can now be used
to force older monitor interface design and the connect API (SME in
driver) to increase hwsim testing coverage.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 15:45:18 +02:00
Jouni Malinen
6f06766e71 nl80211: Fix nl_mgmt handling in partial error case
If Action frame registration in nl80211_mgmt_subscribe_non_ap() failed
for any frame type, the previous implementation skipped
nl80211_mgmt_handle_register_eloop() call. This is not desirable since
none of the Action frame types could be received and even worse, the
following nl80211_destroy_eloop_handle() call for nl_mgmt would likely
result in crashing the process due to the ELOOP_SOCKET_INVALID XOR
operation. This could be triggered at least in a P2P group interface
startup failure case.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 15:45:18 +02:00
Jouni Malinen
4ea6a47133 nl80211: Prefer newer scan result over older during duplicate removal
Previously, it was possible for bss_info_handler() to end up dropping a
newer scan result entry if there were two entries with the same BSSID
and SSID (i.e., only frequency was different) and we were not associated
with either. This could happen, e.g., in some P2P use cases where device
discovery may happen on different channels. Fix this by checking the age
of the scan entries as well to prefer the most recent response.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 15:45:18 +02:00
Jouni Malinen
2eef5177ad nl80211: Report set_supp_port failures in debug log
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 09:16:27 +02:00
Jouni Malinen
a0bdd1916f nl80211: Share a helper function for connect and associate commands
Most of the attributes to these commands are identical and there is no
need to maintain two copies of the same functionality.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 09:16:27 +02:00
Jouni Malinen
4848a38d85 Get rid of duplicated cipher suite and AKM definitions
WPA_CIPHER_* and CIPHER_* are used for the exact same set of cipher
suites with the main difference being that the WPA_CIPHER_* version is
suitable to be used as a bitfield. Similarly, WPA_KEY_MGMT_* and
KEY_MGMT_* have similar design for AKMs. There is no need to maintain
two separate copies of the definitions since the bitfield compatible
version can be used for both needs. Get rid of the CIPHER_* and
KEY_MGMT_* versions to clean up the implementation by getting rid of
unnecessary mapping functions.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 09:16:27 +02:00
Jouni Malinen
de4ed4a89b nl80211: Use helper functions for cipher suite mapping
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 09:16:27 +02:00
Jouni Malinen
a565084f96 nl80211: Set control port for NL80211_CMD_COMMAND
NL80211_ATTR_CONTROL_PORT was previously set only for
NL80211_CMD_ASSOCIATE, but it should also be set when using
NL80211_CMD_COMMAND (driver-based SME) even though none of the current
non-mac80211 drivers use this.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 09:15:49 +02:00
Jouni Malinen
35f3d3ed5f nl80211: Clean up regulatory rule debug prints
Combine maximum bandwidth and EIRP into a single debug print.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-30 23:35:48 +02:00
Jouni Malinen
880de8851e nl80211: Print frame registration match on same debug line
This makes debug log a bit more readable.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-30 23:35:48 +02:00
Jouni Malinen
152cff6ba6 P2P: Remove WPA_DRIVER_FLAGS_P2P_MGMT option
The option of handling upper layer P2P management operations within the
driver/firmware was originally planned to be used with wpa_supplicant,
but this has not really happened and there is no clear sign of this
being needed in the near term either. This functionality has not been
completed and it is certainly not being kept up-to-date or tested. As
such, it is best to remove it for now and if this or something similar
is needed in the future, it can be brought back once a clear need for it
has been demonstrated first.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 18:20:47 +02:00
Jouni Malinen
dbfb8e82ff Remove unnecessary EVENT_RX_ACTION
This driver event was used separately for some Action frames, but all
the driver wrappers converted to this from information that would have
been enough to indicate an EVENT_RX_MGMT event. In addition, the
received event was then converted back to a full IEEE 802.11 management
frame for processing in most cases. This is unnecessary complexity, so
get rid of the extra path and use EVENT_RX_MGMT for Action frames as
well as other management frame subtypes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 17:18:17 +02:00
Jouni Malinen
2d2ecf51aa nl80211: Fix protected Action frame reporting for AP mode
Action frame RX report through EVENT_RX_ACTION did not indicate whether
the frame was protected or not even though that information is available
in mlme_event_mgmt(). hostapd_rx_action() has a workaround for setting
the protected flag for SA Query frames, but that did not apply for other
frames, like FT Action. This broke FT-over-DS when PMF is enabled with
newer kernel versions (i.e., the ones that do not use monitor interface
for receiving management frames).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-29 10:00:31 +02:00
Jouni Malinen
a5f40eff18 Track whether scan was started by us or an external program
This can be used to improve scan behavior in cases external programs
request scans directly from the driver.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 18:27:48 +02:00
Jouni Malinen
18ae237783 Fix comment format
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 18:27:48 +02:00
Jouni Malinen
3ae3ec2727 nl80211: Add scanned frequencies/SSIDs into debug log
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 18:27:48 +02:00