Commit graph

2053 commits

Author SHA1 Message Date
Holger Schurig
2ea2fcc7e6 nl80211: Fix WEP key configuration for prior to authentication
The driver data was changed from struct wpa_driver_nl80211_data * to
struct i802_bss * and the internal call will need to match that change.
2010-03-27 22:22:17 -07:00
Jouni Malinen
03bcb0af0d Fix wpa_auth_iface_iter() to skip BSSes without Authenticator
This could cause NULL pointer deference if multi-BSS configuration
was used with OKC in some cases.
2010-03-26 23:26:24 -07:00
Jouni Malinen
b766a9a293 Add freq_list network configuration parameter
This can be used to limit which frequencies are considered when
selecting a BSS. This is somewhat similar to scan_freq, but will
also affect any scan results regardless of which program triggered
the scan.
2010-03-26 22:45:50 -07:00
Jouni Malinen
9fad706c68 nl80211: Add more debug information about scan request parameters 2010-03-26 22:22:38 -07:00
Jouni Malinen
15664ad01a nl80211: Silence set_key ENOLINK failure messages on key clearing
This happens in common case and is expected, so there is no need to
include the potentially confusing failure message in the debug log.
2010-03-26 21:58:31 -07:00
Jouni Malinen
ef580012d1 FT: Fix Authorized flag setting for FT protocol
4-way handshake or EAPOL is not used in this case, so we must
force Authorized flag to be set at the conclusion of successful
FT protocol run.
2010-03-13 21:43:00 +02:00
Jouni Malinen
5d5a9f0021 FT: Clean EAPOL supp portValid to force re-entry to AUTHENTICATED
This fixed FT-over-DS to end up in Authorized state when the EAPOL
PAE state machine re-enters AUTHENTICATED.
2010-03-13 21:40:44 +02:00
Jouni Malinen
62c72d7299 FT: Process reassoc resp FT IEs when using wpa_supplicant SME 2010-03-13 21:13:18 +02:00
Jouni Malinen
0e84c25434 FT: Fix PTK configuration in authenticator
Must update sm->pairwise when fetching PMK-R1 SA.
Add a workaround for drivers that cannot set keys before association
(e.g., cfg80211/mac80211): retry PTK configuration after association.
2010-03-13 21:11:26 +02:00
Jouni Malinen
2a7e7f4e4a FT: Add driver op for marking a STA authenticated
This can be used with FT-over-DS where FT Action frame exchange
triggers transition to State 2 (authenticated) without Authentication
frame exchange.
2010-03-13 18:28:15 +02:00
Jouni Malinen
fe1919856c FT: Update SME frequency info before sme_associate() call
This is needed to allow FT-over-DS to request correct channel for
the reassociation with the target AP.
2010-03-13 18:26:25 +02:00
Jouni Malinen
86f7b62a33 FT: Add a workaround to set PTK after reassociation
If the PTK configuration prior to association fails, allow reassociation
attempt to continue and configure PTK after association. This is a
workaround for drivers that do not allow PTK to be configured before
association (e.g., current cfg80211/mac80211).
2010-03-13 17:15:38 +02:00
Jouni Malinen
71024cb255 FT: Request reassociation after successful FT Action frame exchange 2010-03-13 17:14:41 +02:00
Jouni Malinen
bdda27eb17 Fix WPS IE in Probe Response frame to include proper Config Methods values
This attribute is supposed to indicate which methods the AP supports as
an Enrollee for adding external Registrars. It was left to 0 when the
AP code did not yet support external Registrars and was forgotten when
the ER support was added.
2010-03-13 13:39:22 +02:00
Jouni Malinen
a7918ec749 wpa_cli: Improved command parameter tab completion 2010-03-12 19:43:15 +02:00
Jouni Malinen
037f83eb44 wpa_cli: Fix detach race with forked monitor process
Need to kill the monitor process before running detach command on
the monitor connection to avoid race where the monitor process may
end up getting the detach command result.
2010-03-12 17:34:56 +02:00
Jouni Malinen
dd63f314bd wpa_cli: Redisplay readline edit after event messages 2010-03-12 17:24:50 +02:00
Jouni Malinen
036f7c4aab FT: Add preliminary processing of FT Action Response from EVENT_RX_ACTION
Previously, this was only done with userspace MLME (i.e., driver_test.c);
now, driver_nl80211.c can deliver the FT Action Response (FT-over-DS)
for processing. The reassociation after successful FT Action frame
exchange is not yet implemented.
2010-03-12 00:43:00 +02:00
Jouni Malinen
73fc617d5c nl80211: Fix FT Action send command
Need to include payload header in the data length to avoid sending
truncated FT Action frame.
2010-03-12 00:41:03 +02:00
Masashi Honma
c1bbb0cee1 NetBSD: Fix driver_bsd.c build
On NetBSD 5.0.2, wpa_supplicant build results in messages below.

../src/drivers/driver_bsd.c: In function 'wpa_driver_bsd_get_ssid':
../src/drivers/driver_bsd.c:876: warning: passing argument 2 of 'bsd_get_ssid'
from incompatible pointer type
../src/drivers/driver_bsd.c:876: warning: passing argument 3 of 'bsd_get_ssid'
makes integer from pointer without a cast
../src/drivers/driver_bsd.c:876: error: too many arguments to function
'bsd_get_ssid'
../src/drivers/driver_bsd.c: In function 'wpa_driver_bsd_scan':
../src/drivers/driver_bsd.c:1125: warning: passing argument 2 of 'bsd_set_ssid'
from incompatible pointer type
../src/drivers/driver_bsd.c:1125: warning: passing argument 3 of 'bsd_set_ssid'
makes integer from pointer without a cast
../src/drivers/driver_bsd.c:1125: error: too many arguments to function
'bsd_set_ssid'
gmake: *** [../src/drivers/driver_bsd.o] Error 1

This patch solves this issue.
2010-03-10 23:33:10 +02:00
Jouni Malinen
7b90c16aa9 nl80211: Add preliminary implementation of FT Action send
This is a step in adding FT support with nl80211-based drivers.
driver_nl80211.c is now registering to handle the FT Action frames
and is able to transmit FT Request frame. Received FT Action frames
are not yet indicated as driver events.
2010-03-07 22:47:39 +02:00
Jouni Malinen
1b484d60e5 FT: Include pairwise cipher suite in PMK-R0 SA and PMK-R1 SA
This is needed to fix PTK derivation to use correct length. Previously,
64-octet PTK may have been derived if the authenticator did not already
have a STA entry. Now, the correct pairwise cipher suite is learned when
then PMK-R1 SA is received.
2010-03-07 22:18:33 +02:00
Jouni Malinen
5205c4f98a nl80211: Fix driver context pointer for auth-failure-case
The new per-BSS context needs to be used here when calling
wpa_driver_nl80211_deauthenticate() to avoid passing incorrect
data type to the function.
2010-03-07 21:29:34 +02:00
Jouni Malinen
921a278604 Fix a typo in r1kh config parameter description
The second item on the line is R1KH-ID, not R0KH-ID.
2010-03-07 21:16:42 +02:00
Marcin Marzec
f400f4f34b Fix typo in WPA_AUTH_ALG_FT definition
This was not supposed to have duplicate value with WPA_AUTH_ALG_LEAP.
The previous version was unable to set FT as the authentication
algorithm with nl80211.
2010-03-07 21:02:55 +02:00
Jouni Malinen
a4652ce64c wpa_gui: Remove unneeded wpa_ctrl_request() msg_cb 2010-03-07 17:28:00 +02:00
Jouni Malinen
0ebdf62735 Remove unnecessary ifname parameter from set_ap_wps_ie() driver op 2010-03-07 11:51:50 +02:00
Jouni Malinen
d3e3a20565 Remove unnecessary ifname parameter from set_ht_params() driver op 2010-03-07 11:49:27 +02:00
Jouni Malinen
3234cba40e Remove unnecessary ifname parameter to sta_set_flags() driver op 2010-03-07 11:45:41 +02:00
Jouni Malinen
62847751e4 Remove unnecessary ifname parameter from sta_add() driver op 2010-03-07 11:42:41 +02:00
Jouni Malinen
8709de1ae8 Remove unnecessary ifname parameter from hapd_get_ssid/hapd_set_ssid 2010-03-07 11:36:45 +02:00
Jouni Malinen
aa48451698 Remove unnecessary ifname parameter from set_generic_elem() driver op 2010-03-07 11:33:06 +02:00
Jouni Malinen
d5dd016a8a Remove unneeded ifname parameter from set_privacy() driver op 2010-03-07 11:29:17 +02:00
Jouni Malinen
044372a333 driver_test: Use driver private BSS context instead of BSS lookup
The ifname-based lookup can now be replaced with the new mechanism that
allows driver wrappers to register per-BSS context data.
2010-03-07 11:26:35 +02:00
Jouni Malinen
70a8419f26 Avoid crash after driver init failure
hostapd_flush_old_stations() needs to check whether the driver
initialization was successful since it gets called on an error path.
2010-03-07 11:25:28 +02:00
Jouni Malinen
7ab68865c0 Remove unneeded iface parameter from if_add() driver op 2010-03-07 10:05:05 +02:00
Jouni Malinen
17557ebe30 Remove forgotten ifname parameter from set_beacon() call 2010-03-07 10:04:35 +02:00
Felix Fietkau
071799872f hostapd: fix a segfault in the error path of the nl80211 if_add function 2010-03-07 09:59:22 +02:00
Jouni Malinen
05ba8690cb nl80211: Unregister forgotten eloop socket on init failure 2010-03-06 22:37:48 +02:00
Jouni Malinen
8b897f5a17 Remove unnecessary ifname parameter from set_beacon()
The new per-BSS driver context makes this unnecessary.
2010-03-06 22:36:40 +02:00
Felix Fietkau
53f3d6f3e6 hostapd: allow stations to move between different bss interfaces
With this patch, a client gets kicked out of the last BSS it was
attached to, when it is associating to a different one.
While mac80211 does allow a station to be present on multiple bss
interfaces, this does seem to cause problems both for the stack
and for hostapd.
2010-03-06 22:30:25 +02:00
Felix Fietkau
a2e40bb650 hostapd: Fix interface selection for the nl80211 driver
This patch allows the nl80211 driver to create its own per-bss context
and pass it to the drv_priv pointer of the hostapd bss state.
With this and the following patch, stations can associate to and switch
between multiple BSS interfaces of a single wiphy.
This obsoletes a few instances of passing ifname to a callback, those
can be removed in a separate patch.
It might also be useful to move more fields from the driver data to the
per-bss data structure in the future.
2010-03-06 22:22:56 +02:00
Felix Fietkau
39f42d1193 hostapd: fix bogus nl80211 interface remove messages for STA WDS 2010-03-06 20:52:22 +02:00
Felix Fietkau
4c32757d22 hostapd: add ifname to the sta_set_flags callback
This fixes multi-BSS STA operations (e.g., setting AUTHORIZED flag) with
nl80211-based drivers.
2010-03-06 20:44:31 +02:00
Jouni Malinen
23e2550c0e Remove unneeded CONFIG_EAP comments
These are not needed for WPS builds since CONFIG_WPS=y enables all
the needed EAP components.
2010-03-06 16:40:53 +02:00
Jouni Malinen
ffd2c8cd4d Avoid warnings on unused function/variables if debug is disabled
CONFIG_NO_STDOUT_DEBUG removes wpa_printf() calls, so need to ifdef
some function and variable definitions to avoid compiler warnings.
2010-03-06 16:37:57 +02:00
Dmitry Shmidt
aa53509ffe Update priority list after priority change
Despite comments in the wpa_config_update_prio_list(struct wpa_config
*config) telling that it is called "if priority for a network is
changed", it is apparently not.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2010-03-06 11:13:50 +02:00
Kel Modderman
09bd6e8cca wpa_supplicant: fix FTBFS on Debian GNU/kFreeBSD
This patch allows wpa_supplicant to compile on Debian's kfreebsd
architectures.

Patch by Stefan Lippers-Hollmann based on work done by Petr Salinger
and Emmanuel Bouthenot for 0.6.X (http://bugs.debian.org/480572).
2010-03-06 10:16:47 +02:00
Jouni Malinen
d2f46a2b13 bsd: Use os_strlcpy instead of strlcpy 2010-03-06 10:04:41 +02:00
Jouni Malinen
3812464cda Add optional scan result filter based on SSID
filter_ssids=1 global configuration parameter can now be used to
enable scan result filtering (with -Dnl80211 only for now) based on
the configured SSIDs. In other words, only the scan results that have
an SSID matching with one of the configured networks are included in the
BSS table. This can be used to reduce memory needs in environments that
have huge number of APs.
2010-03-05 21:42:06 +02:00