Commit graph

85 commits

Author SHA1 Message Date
Jouni Malinen
9c32d04e4d tests: P2P GO starting a persistent group with 80+80 MHz bandwidth
Signed-off-by: Jouni Malinen <j@w1.fi>
2023-12-23 12:20:24 +02:00
Jouni Malinen
94cb040021 tests: Make p2p_channel_avoid* more robust
Terminate the group explicitly before cleanup to avoid a race condition
between an automatically started scan to find the GO again and the scan
started to clear the scan cache.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-12-18 17:12:30 +02:00
Jouni Malinen
86dd038889 tests: Increase timeout in go_neg_forced_freq_diff_than_bss_freq
It can take significant amount of time to find the peer in this type of
a case where an AP connection is forced on a different channel while
going through p2p_find on both devices.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2023-12-14 12:13:20 +02:00
Jouni Malinen
f47d378cea tests: P2P and avoid frequencies preventing 80 MHz on channel 149"
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-09-23 00:12:33 +03:00
Jouni Malinen
7fa67861ae tests: Fix p2p_channel_avoid3
This test case assumed that the p2p_pref_chan 128:44 parameter would
have resulted in channel 44 (5220 MHz) being selected. That does not
work anymore since that channel was marked to require DFS/radar
detection in regdb. Fix the text case by changing to use another country
with rules that match the test case expectations.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-07-28 16:56:21 +03:00
Andrei Otcheretianski
a033e886b2 tests: Fix regdom cleanup in some p2p_channel tests
cfg80211 may ignore user hints while there are active COUNTRY_IE hints,
thus at some timings it may ignore the country setting back to world
domain. Fix it by making sure the country is set only after all the
interfaces are stopped. In addition, call a more robust
clear_regdom_dev() function.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2021-02-06 16:18:40 +02:00
Andrei Otcheretianski
5acc20e8f4 tests: Fix sporadic failures in p2p_channel_avoid3
The P2P group may be originally formed on UNII-3, so disabling UNII-1
and UNII-2 will not result in a channel switch failing the test.
Fix this by setting 44 as a preferred channel.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2021-02-06 12:09:30 +02:00
Thomas Pedersen
95cff14c6f tests: Fix p2p_autogo_pref_chan_not_in_regulatory
Sweden now allows channel 149 in the updated wireless-regdb. Choose
Japan for the negative test instead.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
2020-12-02 17:25:09 +02:00
Jouni Malinen
e7b27637a5 tests: P2P with 6 GHz disabled
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-10-08 23:29:50 +03:00
Masashi Honma
08d3b3df99 tests: Fix p2p_go_move_scm_peer_does_not_support false negative by using common finalizer
p2p_go_move_scm_peer_does_not_support fails with this message.

---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------

This patch fixes the issue.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-06-26 20:42:20 +03:00
Masashi Honma
c40b2638ed tests: Fix p2p_channel_5ghz_165_169_us false negative by using common finalizer
p2p_channel_5ghz_165_169_us fails with this message.

---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------

This patch fixes the issue.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-06-26 20:42:20 +03:00
Masashi Honma
645a16f186 tests: Fix p2p_channel_5ghz_only false negative by using common finalizer
p2p_channel_5ghz_only fails with this message.

---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------

This patch fixes the issue.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-06-26 20:42:20 +03:00
Masashi Honma
b8a868594a tests: Fix autogo_ht_vht false negative by using common finalizer
autogo_ht_vht fails with this message.

---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------

This patch fixes the issue.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-06-26 20:42:20 +03:00
Masashi Honma
e6c82d450e tests: Fix p2p_autogo_pref_chan_not_in_regulatory false negative by using common finalizer
p2p_autogo_pref_chan_not_in_regulatory fails with this message.

---------------
wlan0: Country code not reset back to 00: is SE
wlan0: Country code cleared back to 00
---------------

This patch fixes the issue.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-06-26 20:42:20 +03:00
Jouni Malinen
fab49f6145 tests: Python coding style cleanup (pylint3 bad-whitespace)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-16 18:52:09 +02:00
Masashi Honma
bab493b904 tests: Use python3 compatible "except" statement
This patch is made by using 2to3 command.

$ find . -name *.py | xargs 2to3 -f except -w -n

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-01-26 12:11:35 +02:00
Jouni Malinen
b9c33e3fba tests: Use different country in p2p_go_move_reg_change
Use of country=00 (world roaming) seemed to not work anymore with the
current cfg80211 regulatory implementation since the existing channel is
left enabled when moving to country=00. Use a specific country code that
does enforce the selected channel from being used anymore to make this
test case pass again.

The change in cfg80211 behavior is from the kernel commit 113f3aaa81bd
("cfg80211: Prevent regulatory restore during STA disconnect in
concurrent interfaces").

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-01 23:33:17 +02:00
Jouni Malinen
7f90a850ff tests: Clear regdom state in go_neg_forced_freq_diff_than_bss_freq
Be more careful with cleaning up the regdom state in cfg80211.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-01 16:35:42 +02:00
Jouni Malinen
2403edb8fd tests: P2P and avoid frequencies driver event on 5 GHz
This test case verifies that wpa_supplicant is able to perform CSA to a
VHT80 channel when having to move the GO due to an avoid-frequencies
driver event.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-06-18 20:11:52 +03:00
Adiel Aloni
0b6cbc4e64 tests: Use global control interface in test_p2p_channel.py
Previously p2p_channel_drv_pref_* tests would fail
if dedicated P2P device is used, since the SET commands
were sent to incorrect interface.
Fix this by using a global control interface instead.

Signed-off-by: Adiel Aloni <adiel.aloni@intel.com>
2017-07-08 16:06:38 +03:00
Jouni Malinen
6ed2498eb5 tests: P2P channel selection with driver frequency preference list
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-16 12:41:22 +02:00
Jouni Malinen
1106833537 tests: Fix p2p_autogo_pref_chan_not_in_regulatory with new regdb
5745 MHz was added as an allowed short range device range in
wireless-regdb for DE which made this test case fail. Fix it for now by
using SE instead of DE for the second part of the test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-25 01:09:06 +02:00
Jouni Malinen
609be6f7c0 tests: P2P group formation with VHT 80 MHz
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-05 21:14:55 +02:00
Jouni Malinen
bc6e32880f tests: Remove extra semicolons from python scripts
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jonathan Afek
9fd6804d61 tests: Mark 525 tests as remote compatible
After successfully passing the 525 tests on a remote setup mark the
tests as remote compatible.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-06-27 21:47:37 +03:00
Andrei Otcheretianski
fc30cc10ac tests: Use global control interface for P2P configurations
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2016-04-25 00:03:40 +03:00
Ilan Peer
463b7f3511 tests: Parse group results in a couple of p2p_channel tests
In p2p_channel_vht80_autogo and p2p_channel_vht80p80_autogo, parse the
P2P-GROUP-STARTED event prior to calling the group_request() method, as
otherwise the group ifname is not set.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-04-24 23:45:57 +03:00
Janusz Dziedzic
8b8a1864ff tests: Pass full apdev to add_ap() function (1)
Pass the full apdev to the add_ap() function instead of just ifname.
This allows us to handle also remote hosts while we can check
apdev['hostname'], apdev['port'].

This step (1) converts the cases where apdev[#]['ifname'] was used as
the argument to hostapd.add_ap().

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-04-03 22:45:57 +03:00
Jouni Malinen
e85bb01998 tests: Move P2P-REMOVE-AND-REFORM-GROUP cases more robust
Wait for the AP-DISABLED and AP-ENABLED group events before reading the
current group operation frequency after P2P-REMOVE-AND-REFORM-GROUP.
This reduces a possibility of a race condition making a test case fail
with the returned frequency being 0 when reading this before the
reformed group is fully up. This may help avoid false error reports for
the following test cases: p2p_go_move_reg_change p2p_go_move_scm
p2p_go_move_scm_peer_supports p2p_go_move_scm_multi.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-24 13:40:54 +02:00
Jouni Malinen
34b164dd25 tests: Fix p2p_go_move_scm_peer_does_not_support to clear avoid freqs
The P2P channel list on dev[1] at the end of
p2p_go_move_scm_peer_does_not_support was empty because all of the 2.4
GHz band got disabled by the simulated avoid frequencies driver event.
That channel list needs to be cleared prior to resetting regulatory
domain back to world roaming to get the P2P channel list updated
properly for the following test cases.

This was triggered by the following test case sequence:
p2p_go_move_scm_peer_does_not_support persistent_group_and_role_change

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 22:06:54 +02:00
Jouni Malinen
f6c09bf46e tests: Remove HwsimSkip from p2p_channel
With the optimizations from the previous commits, none of the test cases
here need to be skipped.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:38:17 +02:00
Jouni Malinen
858d12f69a tests: Optimize p2p_go_move_active initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:37:35 +02:00
Jouni Malinen
ae248721f4 tests: Optimize p2p_go_move_reg_change initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:35:51 +02:00
Jouni Malinen
63b87a5aeb tests: Optimize p2p_go_move_scm_multi initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:31:44 +02:00
Jouni Malinen
3acf68feb9 tests: Convert p2p_go_move_scm_multi to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:30:02 +02:00
Jouni Malinen
d18df681b0 tests: Convert p2p_go_move_scm_peer_does_not_support to dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

In addition, remove dependency on --long since this test case does not
really take that long.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:27:25 +02:00
Jouni Malinen
f0b39e057a tests: Convert p2p_go_move_scm_peer_supports to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

In addition, remove dependency on --long since this test case does not
really take that long (just couple of seconds).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:24:33 +02:00
Jouni Malinen
b98445f6ba tests: Optimize p2p_go_move_scm initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:22:30 +02:00
Jouni Malinen
262825e896 tests: Convert p2p_go_move_scm to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:14:38 +02:00
Jouni Malinen
1002684e11 tests: Convert p2p_go_move_active to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:11:27 +02:00
Jouni Malinen
35b61a496a tests: Verify P2P group formation with 80+80 MHz channel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-25 22:43:38 +02:00
Ilan Peer
edb63af6ba tests: Test no P2P GO move when invitation is in progress
Add a test to verify that a P2P GO does not start a CSA
once invitation signalling is done, and the P2P client is
about to connect.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-11-22 22:16:32 +02:00
Jouni Malinen
9cb3413090 tests: Move P2P helper functions to a separate file
This makes it easier to import these into the P2P test scripts.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
4b9d79b66e tests: Make it less likely to overflow wlan5 control iface socket
Number of test cases did not read all control interface socket events
from the dynamically added wlan5 interface. This could result in hitting
maximum socket TX queue length and failures in the following test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 01:42:42 +03:00
Ilan Peer
cd27374f5f tests: Modify p2p_channel to also support CSA
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-03 21:42:33 +03:00
Ilan Peer
ab653ed2f6 tests: Add P2P GO frequency change policy tests
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-04 19:15:44 +03:00
Jouni Malinen
ee19ba74cd tests: P2P GO and 5 GHz channels 165 (allowed) and 169 (disallowed) in US
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-06-12 20:54:01 +03:00
Jouni Malinen
36e6633415 tests: Fix go_neg_with_bss_connected with P2P Device
Group interface name was fetched from the results of an incorrect group
formation and because of this, group removal failed in case P2P Device
is used and dev[1] ends up getting different group ifname for the
groups.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-08 18:33:16 +03:00
Ben Rosenfeld
6f27f79084 tests: Use list_networks with p2p=true in test_p2p_channel
In case that there is a need to list the persistent P2P networks,
the global control interface needs to be used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-08 18:31:05 +03:00
Ben Rosenfeld
eb1d68eff0 tests: Change set_country() to use the global interface to get event
This is required for cases that multiple interfaces are used and the
event can happen on any of them, for example when a dedicated P2P Device
interface is used.

Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com>
2015-05-07 21:09:29 +03:00