Add ChangeLog entries from v1.0 release
Signed-hostap: Jouni Malinen <j@w1.fi>
This commit is contained in:
Jouni Malinen
parent
349493bd0c
commit
ec4a5d32b1
2 changed files with 281 additions and 0 deletions
|
|
@ -1,5 +1,112 @@
|
|||
ChangeLog for hostapd
|
||||
|
||||
2012-05-10 - v1.0
|
||||
* Add channel selection support in hostapd. See hostapd.conf.
|
||||
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
|
||||
TSF offset. See hostapd.conf for config info.
|
||||
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
|
||||
This allows the driver to use PS buffering of Deauthentication and
|
||||
Disassociation frames when the STA is in power save sleep. Only
|
||||
available with drivers that provide TX status events for Deauth/
|
||||
Disassoc frames (nl80211).
|
||||
* Allow PMKSA caching to be disabled on the Authenticator. See
|
||||
hostap.conf config parameter disable_pmksa_caching.
|
||||
* atheros: Add support for IEEE 802.11w configuration.
|
||||
* bsd: Add support for setting HT values in IFM_MMASK.
|
||||
* Allow client isolation to be configured with ap_isolate. Client
|
||||
isolation can be used to prevent low-level bridging of frames
|
||||
between associated stations in the BSS. By default, this bridging
|
||||
is allowed.
|
||||
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
|
||||
* Add require_ht config parameter, which can be used to configure
|
||||
hostapd to reject association with any station that does not support
|
||||
HT PHY.
|
||||
* Add support for writing debug log to a file using "-f" option. Also
|
||||
add relog CLI command to re-open the log file.
|
||||
* Add bridge handling for WDS STA interfaces. By default they are
|
||||
added to the configured bridge of the AP interface (if present),
|
||||
but the user can also specify a separate bridge using cli command
|
||||
wds_bridge.
|
||||
* hostapd_cli:
|
||||
- Add wds_bridge command for specifying bridge for WDS STA
|
||||
interfaces.
|
||||
- Add relog command for reopening log file.
|
||||
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
|
||||
due to inactivity.
|
||||
- Add wps_config ctrl_interface command for configuring AP. This
|
||||
command can be used to configure the AP using the internal WPS
|
||||
registrar. It works in the same way as new AP settings received
|
||||
from an ER.
|
||||
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
|
||||
- Add command get version, that returns hostapd version string.
|
||||
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
|
||||
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
|
||||
notification to the STA.
|
||||
* Allow AP mode to disconnect STAs based on low ACK condition (when
|
||||
the data connection is not working properly, e.g., due to the STA
|
||||
going outside the range of the AP). Disabled by default, enable by
|
||||
config option disassoc_low_ack.
|
||||
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
|
||||
config file.
|
||||
* WPS:
|
||||
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
|
||||
in WPS-NEW-AP-SETTINGS.
|
||||
- Dispatch more WPS events through hostapd ctrl_iface.
|
||||
- Add mechanism for indicating non-standard WPS errors.
|
||||
- Change concurrent radio AP to use only one WPS UPnP instance.
|
||||
- Add wps_check_pin command for processing PIN from user input.
|
||||
UIs can use this command to process a PIN entered by a user and to
|
||||
validate the checksum digit (if present).
|
||||
- Add hostap_cli get_config command to display current AP config.
|
||||
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
|
||||
runtime and support dynamic AP PIN management.
|
||||
- Disable AP PIN after 10 consecutive failures. Slow down attacks
|
||||
on failures up to 10.
|
||||
- Allow AP to start in Enrollee mode without AP PIN for probing,
|
||||
to be compatible with Windows 7.
|
||||
- Add Config Error into WPS-FAIL events to provide more info
|
||||
to the user on how to resolve the issue.
|
||||
- When controlling multiple interfaces:
|
||||
- apply WPS commands to all interfaces configured to use WPS
|
||||
- apply WPS config changes to all interfaces that use WPS
|
||||
- when an attack is detected on any interface, disable AP PIN on
|
||||
all interfaces
|
||||
* WPS ER:
|
||||
- Show SetSelectedRegistrar events as ctrl_iface events.
|
||||
- Add special AP Setup Locked mode to allow read only ER.
|
||||
ap_setup_locked=2 can now be used to enable a special mode where
|
||||
WPS ER can learn the current AP settings, but cannot change them.
|
||||
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
|
||||
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
|
||||
for testing protocol extensibility.
|
||||
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
|
||||
workarounds.
|
||||
- Add support for AuthorizedMACs attribute.
|
||||
* TDLS:
|
||||
- Allow TDLS use or TDLS channel switching in the BSS to be
|
||||
prohibited in the BSS, using config params tdls_prohibit and
|
||||
tdls_prohibit_chan_switch.
|
||||
* EAP server: Add support for configuring fragment size (see
|
||||
fragment_size in hostapd.conf).
|
||||
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
|
||||
wlantest can be used to capture frames from a monitor interface
|
||||
for realtime capturing or from pcap files for offline analysis.
|
||||
* Interworking: Support added for 802.11u. Enable in .config with
|
||||
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
|
||||
interworking.
|
||||
* Android: Add build and runtime support for Android hostapd.
|
||||
* Add a new debug message level for excessive information. Use
|
||||
-ddd to enable.
|
||||
* TLS: Add support for tls_disable_time_checks=1 in client mode.
|
||||
* Internal TLS:
|
||||
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
|
||||
CONFIG_TLSV11.
|
||||
- Add domainComponent parser for X.509 names
|
||||
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
|
||||
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
|
||||
Move HT IEs to be later in (Re)Assoc Resp.
|
||||
* Many bugfixes.
|
||||
|
||||
2010-04-18 - v0.7.2
|
||||
* fix WPS internal Registrar use when an external Registrar is also
|
||||
active
|
||||
|
|
|
|||
|
|
@ -1,5 +1,179 @@
|
|||
ChangeLog for wpa_supplicant
|
||||
|
||||
2012-05-10 - v1.0
|
||||
* bsd: Add support for setting HT values in IFM_MMASK.
|
||||
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
|
||||
This allows the driver to use PS buffering of Deauthentication and
|
||||
Disassociation frames when the STA is in power save sleep. Only
|
||||
available with drivers that provide TX status events for Deauth/
|
||||
Disassoc frames (nl80211).
|
||||
* Drop oldest unknown BSS table entries first. This makes it less
|
||||
likely to hit connection issues in environments with huge number
|
||||
of visible APs.
|
||||
* Add systemd support.
|
||||
* Add support for setting the syslog facility from the config file
|
||||
at build time.
|
||||
* atheros: Add support for IEEE 802.11w configuration.
|
||||
* AP mode: Allow enable HT20 if driver supports it, by setting the
|
||||
config parameter ieee80211n.
|
||||
* Allow AP mode to disconnect STAs based on low ACK condition (when
|
||||
the data connection is not working properly, e.g., due to the STA
|
||||
going outside the range of the AP). Disabled by default, enable by
|
||||
config option disassoc_low_ack.
|
||||
* nl80211:
|
||||
- Support GTK rekey offload.
|
||||
- Support PMKSA candidate events. This adds support for RSN
|
||||
pre-authentication with nl80211 interface and drivers that handle
|
||||
roaming internally.
|
||||
* dbus:
|
||||
- Add a DBus signal for EAP SM requests, emitted on the Interface
|
||||
object.
|
||||
- Export max scan ssids supported by the driver as MaxScanSSID.
|
||||
- Add signal Certification for information about server certification.
|
||||
- Add BSSExpireAge and BSSExpireCount interface properties and
|
||||
support set/get, which allows for setting BSS cache expiration age
|
||||
and expiration scan count.
|
||||
- Add ConfigFile to AddInterface properties.
|
||||
- Add Interface.Country property and support to get/set the value.
|
||||
- Add DBus property CurrentAuthMode.
|
||||
- P2P DBus API added.
|
||||
- Emit property changed events (for property BSSs) when adding/
|
||||
removing BSSs.
|
||||
- Treat '' in SSIDs of Interface.Scan as a request for broadcast
|
||||
scan, instead of ignoring it.
|
||||
- Add DBus getter/setter for FastReauth.
|
||||
- Raise PropertiesChanged on org.freedesktop.DBus.Properties.
|
||||
* wpa_cli:
|
||||
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
|
||||
due to inactivity.
|
||||
- Make second argument to set command optional. This can be used to
|
||||
indicate a zero length value.
|
||||
- Add signal_poll command.
|
||||
- Add bss_expire_age and bss_expire_count commands to set/get BSS
|
||||
cache expiration age and expiration scan count.
|
||||
- Add ability to set scan interval (the time in seconds wpa_s waits
|
||||
before requesting a new scan after failing to find a suitable
|
||||
network in scan results) using scan_interval command.
|
||||
- Add event CTRL-EVENT-ASSOC-REJECT for association rejected.
|
||||
- Add command get version, that returns wpa_supplicant version string.
|
||||
- Add command sta_autoconnect for disabling automatic reconnection
|
||||
on receiving disconnection event.
|
||||
- Setting bssid parameter to an empty string "" or any can now be
|
||||
used to clear the bssid_set flag in a network block, i.e., to remove
|
||||
bssid filtering.
|
||||
- Add tdls_testing command to add a special testing feature for
|
||||
changing TDLS behavior. Build param CONFIG_TDLS_TESTING must be
|
||||
enabled as well.
|
||||
- For interworking, add wpa_cli commands interworking_select,
|
||||
interworking_connect, anqp_get, fetch_anqp, and stop_fetch_anqp.
|
||||
- Many P2P commands were added. See README-P2P.
|
||||
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
|
||||
- Allow set command to change global config parameters.
|
||||
- Add log_level command, which can be used to display the current
|
||||
debugging level and to change the log level during run time.
|
||||
- Add note command, which can be used to insert notes to the debug
|
||||
log.
|
||||
- Add internal line edit implementation. CONFIG_WPA_CLI_EDIT=y
|
||||
can now be used to build wpa_cli with internal implementation of
|
||||
line editing and history support. This can be used as a replacement
|
||||
for CONFIG_READLINE=y.
|
||||
* AP mode: Add max_num_sta config option, which can be used to limit
|
||||
the number of stations allowed to connect to the AP.
|
||||
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
|
||||
config file.
|
||||
* wext: Increase scan timeout from 5 to 10 seconds.
|
||||
* Add blacklist command, allowing an external program to
|
||||
manage the BSS blacklist and display its current contents.
|
||||
* WPS:
|
||||
- Add wpa_cli wps_pin get command for generating random PINs. This can
|
||||
be used in a UI to generate a PIN without starting WPS (or P2P)
|
||||
operation.
|
||||
- Set RF bands based on driver capabilities, instead of hardcoding
|
||||
them.
|
||||
- Add mechanism for indicating non-standard WPS errors.
|
||||
- Add CONFIG_WPS_REG_DISABLE_OPEN=y option to disable open networks
|
||||
by default.
|
||||
- Add wps_ap_pin cli command for wpa_supplicant AP mode.
|
||||
- Add wps_check_pin cli command for processing PIN from user input.
|
||||
UIs can use this command to process a PIN entered by a user and to
|
||||
validate the checksum digit (if present).
|
||||
- Cancel WPS operation on PBC session overlap detection.
|
||||
- New wps_cancel command in wpa_cli will cancel a pending WPS
|
||||
operation.
|
||||
- wpa_cli action: Add WPS_EVENT_SUCCESS and WPS_EVENT_FAIL handlers.
|
||||
- Trigger WPS config update on Manufacturer, Model Name, Model
|
||||
Number, and Serial Number changes.
|
||||
- Fragment size is now configurable for EAP-WSC peer. Use
|
||||
wpa_cli set wps_fragment_size <val>.
|
||||
- Disable AP PIN after 10 consecutive failures. Slow down attacks on
|
||||
failures up to 10.
|
||||
- Allow AP to start in Enrollee mode without AP PIN for probing, to
|
||||
be compatible with Windows 7.
|
||||
- Add Config Error into WPS-FAIL events to provide more info to the
|
||||
user on how to resolve the issue.
|
||||
- Label and Display config methods are not allowed to be enabled
|
||||
at the same time, since it is unclear which PIN to use if both
|
||||
methods are advertised.
|
||||
- When controlling multiple interfaces:
|
||||
- apply WPS commands to all interfaces configured to use WPS
|
||||
- apply WPS config changes to all interfaces that use WPS
|
||||
- when an attack is detected on any interface, disable AP PIN on
|
||||
all interfaces
|
||||
* WPS ER:
|
||||
- Add special AP Setup Locked mode to allow read only ER.
|
||||
ap_setup_locked=2 can now be used to enable a special mode where
|
||||
WPS ER can learn the current AP settings, but cannot change them.
|
||||
- Show SetSelectedRegistrar events as ctrl_iface events
|
||||
- Add wps_er_set_config to enroll a network based on a local
|
||||
network configuration block instead of having to (re-)learn the
|
||||
current AP settings with wps_er_learn.
|
||||
- Allow AP filtering based on IP address, add ctrl_iface event for
|
||||
learned AP settings, add wps_er_config command to configure an AP.
|
||||
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
|
||||
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
|
||||
for testing protocol extensibility.
|
||||
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
|
||||
workarounds.
|
||||
- Add support for AuthorizedMACs attribute.
|
||||
* TDLS:
|
||||
- Propogate TDLS related nl80211 capability flags from kernel and
|
||||
add them as driver capability flags. If the driver doesn't support
|
||||
capabilities, assume TDLS is supported internally. When TDLS is
|
||||
explicitly not supported, disable all user facing TDLS operations.
|
||||
- Allow TDLS to be disabled at runtime (mostly for testing).
|
||||
Use set tdls_disabled.
|
||||
- Honor AP TDLS settings that prohibit/allow TDLS.
|
||||
- Add a special testing feature for changing TDLS behavior. Use
|
||||
CONFIG_TDLS_TESTING build param to enable. Configure at runtime
|
||||
with tdls_testing cli command.
|
||||
- Add support for TDLS 802.11z.
|
||||
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
|
||||
wlantest can be used to capture frames from a monitor interface
|
||||
for realtime capturing or from pcap files for offline analysis.
|
||||
* Interworking: Support added for 802.11u. Enable in .config with
|
||||
CONFIG_INTERWORKING. See wpa_supplicant.conf for config parameters
|
||||
for interworking. wpa_cli commands added to support this are
|
||||
interworking_select, interworking_connect, anqp_get, fetch_anqp,
|
||||
and stop_fetch_anqp.
|
||||
* Android: Add build and runtime support for Android wpa_supplicant.
|
||||
* bgscan learn: Add new bgscan that learns BSS information based on
|
||||
previous scans, and uses that information to dynamically generate
|
||||
the list of channels for background scans.
|
||||
* Add a new debug message level for excessive information. Use
|
||||
-ddd to enable.
|
||||
* TLS: Add support for tls_disable_time_checks=1 in client mode.
|
||||
* Internal TLS:
|
||||
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
|
||||
CONFIG_TLSV11.
|
||||
- Add domainComponent parser for X.509 names.
|
||||
* Linux: Add RFKill support by adding an interface state "disabled".
|
||||
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
|
||||
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
|
||||
Move HT IEs to be later in (Re)Assoc Resp.
|
||||
* Solaris: Add support for wired 802.1X client.
|
||||
* Wi-Fi Direct support. See README-P2P for more information.
|
||||
* Many bugfixes.
|
||||
|
||||
2010-04-18 - v0.7.2
|
||||
* nl80211: fixed number of issues with roaming
|
||||
* avoid unnecessary roaming if multiple APs with similar signal
|
||||
|
|
|
|||
Loading…
Reference in a new issue