tests: GAS/ANQP during MLO association

Signed-off-by: Jouni Malinen <j@w1.fi>
This commit is contained in:
Jouni Malinen 2024-01-13 12:25:47 +02:00
parent bef4171521
commit c0e93bb217

View file

@ -11,6 +11,7 @@ import hwsim_utils
from wpasupplicant import WpaSupplicant
import re
from tshark import run_tshark
from test_gas import hs20_ap_params
def eht_verify_wifi_version(dev):
status = dev.get_status()
@ -1308,3 +1309,69 @@ def test_eht_6ghz_320mhz_2(dev, apdev):
def test_eht_6ghz_320mhz_3(dev, apdev):
"""EHT with 320 MHz channel width on 6 GHz center 31 primary 37"""
_test_eht_6ghz(dev, apdev, 37, 137, 31)
def check_anqp(dev, bssid):
if "OK" not in dev.request("ANQP_GET " + bssid + " 258"):
raise Exception("ANQP_GET command failed")
ev = dev.wait_event(["GAS-QUERY-START"], timeout=5)
if ev is None:
raise Exception("GAS query start timed out")
ev = dev.wait_event(["GAS-QUERY-DONE"], timeout=10)
if ev is None:
raise Exception("GAS query timed out")
ev = dev.wait_event(["RX-ANQP"], timeout=1)
if ev is None or "Venue Name" not in ev:
raise Exception("Did not receive Venue Name")
ev = dev.wait_event(["ANQP-QUERY-DONE"], timeout=10)
if ev is None:
raise Exception("ANQP-QUERY-DONE event not seen")
if "result=SUCCESS" not in ev:
raise Exception("Unexpected result: " + ev)
def test_eht_mld_gas(dev, apdev):
"""GAS/ANQP during MLO association"""
params = hs20_ap_params()
bssid = apdev[0]['bssid']
params['hessid'] = bssid
params['channel'] = "11"
hapd = hostapd.add_ap(apdev[0], params)
with HWSimRadio(use_mlo=True) as (hapd0_radio, hapd0_iface), \
HWSimRadio(use_mlo=True) as (hapd1_radio, hapd1_iface), \
HWSimRadio(use_mlo=True) as (wpas_radio, wpas_iface):
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add(wpas_iface)
wpas.scan_for_bss(bssid, freq="2462")
ssid = "owe_two_link"
params = eht_mld_ap_wpa2_params(ssid, key_mgmt="OWE", mfp="2")
params['interworking'] = "1"
params['venue_group'] = "7"
params['venue_type'] = "1"
params['venue_name'] = "eng:Example venue"
hapd0 = eht_mld_enable_ap(hapd0_iface, params)
bssid0 = hapd0.own_addr()
params['channel'] = '6'
hapd1 = eht_mld_enable_ap(hapd0_iface, params)
bssid1 = hapd1.own_addr()
wpas.scan_for_bss(bssid0, freq="2412")
wpas.scan_for_bss(bssid1, freq="2437")
wpas.connect(ssid, scan_freq="2412 2437", key_mgmt="OWE",
ieee80211w="2")
hapd0.wait_sta()
hapd1.wait_sta()
eht_verify_status(wpas, hapd0, 2412, 20, is_ht=True, mld=True,
valid_links=3, active_links=3)
check_anqp(wpas, bssid)
check_anqp(wpas, bssid0)
check_anqp(wpas, bssid1)