Add QCA vendor commands to set and get MLO links state information
Add a new vendor command and attributes to control and fetch the state information of the MLO links affiliated with a specific interface. This will enable user space to dynamically control the MLO links states based on the latency, throughput and power save requirements. Signed-off-by: Shivani Baranwal <quic_shivbara@quicinc.com>
This commit is contained in:
Shivani Baranwal
Jouni Malinen
parent
44b32a7526
commit
b1f85957c4
1 changed files with 160 additions and 0 deletions
|
|
@ -894,6 +894,11 @@ enum qca_radiotap_vendor_ids {
|
|||
* latest several instances of roam information cached in the driver.
|
||||
* The command is only used for STA mode. The attributes used with this
|
||||
* command are defined in enum qca_wlan_vendor_attr_roam_cached_stats.
|
||||
*
|
||||
* @QCA_NL80211_VENDOR_SUBCMD_MLO_LINK_STATE: This vendor subcommand is used to
|
||||
* configure and fetch the state information of the MLO links affiliated
|
||||
* with the STA interface. The attributes used with this command are
|
||||
* defined in enum qca_wlan_vendor_attr_mlo_link_state.
|
||||
*/
|
||||
enum qca_nl80211_vendor_subcmds {
|
||||
QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
|
||||
|
|
@ -1104,6 +1109,7 @@ enum qca_nl80211_vendor_subcmds {
|
|||
QCA_NL80211_VENDOR_SUBCMD_DOZED_AP = 224,
|
||||
QCA_NL80211_VENDOR_SUBCMD_GET_MONITOR_MODE = 225,
|
||||
QCA_NL80211_VENDOR_SUBCMD_ROAM_STATS = 226,
|
||||
QCA_NL80211_VENDOR_SUBCMD_MLO_LINK_STATE = 227,
|
||||
};
|
||||
|
||||
/* Compatibility defines for previously used subcmd names.
|
||||
|
|
@ -14898,4 +14904,158 @@ enum qca_wlan_vendor_attr_get_monitor_mode {
|
|||
QCA_WLAN_VENDOR_ATTR_GET_MONITOR_MODE_AFTER_LAST - 1,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_link_state_op_types - Defines different types of
|
||||
* operations for which %QCA_NL80211_VENDOR_SUBCMD_MLO_LINK_STATE can be used.
|
||||
* Will be used with %QCA_WLAN_VENDOR_ATTR_LINK_STATE_OP_TYPE attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_LINK_STATE_OP_GET - Get the MLO links state information.
|
||||
* @QCA_WLAN_VENDOR_LINK_STATE_OP_SET - Set the MLO links state information.
|
||||
*/
|
||||
enum qca_wlan_vendor_link_state_op_types {
|
||||
QCA_WLAN_VENDOR_LINK_STATE_OP_GET = 0,
|
||||
QCA_WLAN_VENDOR_LINK_STATE_OP_SET = 1,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_link_state_control_modes - Represents the types of MLO
|
||||
* links state control modes. This enum is used by
|
||||
* %QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONTROL_MODE attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_LINK_STATE_CONTROL_MODE_DEFAULT: MLO links state controlled
|
||||
* by the driver.
|
||||
* @QCA_WLAN_VENDOR_LINK_STATE_CONTROL_MODE_USER: MLO links state controlled by
|
||||
* user space.
|
||||
* @QCA_WLAN_VENDOR_LINK_STATE_CONTROL_MODE_MIXED: User space provides the
|
||||
* desired number of MLO links to operate in active state at any given time.
|
||||
* The driver will choose which MLO links should operate in the active state.
|
||||
* See enum qca_wlan_vendor_link_state for active state definition.
|
||||
*/
|
||||
enum qca_wlan_vendor_link_state_control_modes {
|
||||
QCA_WLAN_VENDOR_LINK_STATE_CONTROL_MODE_DEFAULT = 0,
|
||||
QCA_WLAN_VENDOR_LINK_STATE_CONTROL_MODE_USER = 1,
|
||||
QCA_WLAN_VENDOR_LINK_STATE_CONTROL_MODE_MIXED = 2,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_link_state_operation_modes - Represents the types of MLO
|
||||
* links state operation modes. This enum is used by
|
||||
* %QCA_WLAN_VENDOR_ATTR_LINK_STATE_OPERATION_MODE attribute.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_LINK_STATE_OPERATION_MODE_DEFAULT: In the default operation
|
||||
* mode, the driver selects the operating mode of the links, without any
|
||||
* guidance from the user space.
|
||||
* @QCA_WLAN_VENDOR_LINK_STATE_OPERATION_MODE_LOW_LATENCY: In the low latency
|
||||
* operation mode the driver should select MLO links that will achieve low
|
||||
* latency.
|
||||
* @QCA_WLAN_VENDOR_LINK_STATE_OPERATION_MODE_HIGH_THROUGHPUT: In the high
|
||||
* throughput operation mode the driver should select MLO links that will
|
||||
* achieve higher throughput.
|
||||
* @QCA_WLAN_VENDOR_LINK_STATE_OPERATION_MODE_LOW_POWER: In the low power
|
||||
* operation mode the driver should select MLO links that will achieve low
|
||||
* power.
|
||||
*/
|
||||
enum qca_wlan_vendor_link_state_operation_modes {
|
||||
QCA_WLAN_VENDOR_LINK_STATE_OPERATION_MODE_DEFAULT = 0,
|
||||
QCA_WLAN_VENDOR_LINK_STATE_OPERATION_MODE_LOW_LATENCY = 1,
|
||||
QCA_WLAN_VENDOR_LINK_STATE_OPERATION_MODE_HIGH_THROUGHPUT = 2,
|
||||
QCA_WLAN_VENDOR_LINK_STATE_OPERATION_MODE_LOW_POWER = 3,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_link_state - Represents the possible link states of an
|
||||
* MLO link.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_LINK_STATE_INACTIVE: In this state, the link will not
|
||||
* be used for data transmission but it can have TIDs mapped to it. It will be
|
||||
* in doze state always and does not monitor the beacons.
|
||||
* @QCA_WLAN_VENDOR_ATTR_LINK_STATE_ACTIVE: In this state, the link will be
|
||||
* used for data TX/RX and monitors the beacons to check TIM bit indication.
|
||||
* It may enter doze state and comes out based on the transmit data traffic and
|
||||
* TIM bit indication in the beacon.
|
||||
*/
|
||||
enum qca_wlan_vendor_link_state {
|
||||
QCA_WLAN_VENDOR_LINK_STATE_INACTIVE = 0,
|
||||
QCA_WLAN_VENDOR_LINK_STATE_ACTIVE = 1,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_attr_link_state_config - Definition of attributes used
|
||||
* inside nested attribute %QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONFIG.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONFIG_LINK_ID: u8 attribute, link ID of the
|
||||
* MLO link.
|
||||
* @QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONFIG_STATE: u32 attribute. See
|
||||
* enum qca_wlan_vendor_link_state for possible MLO link states.
|
||||
*/
|
||||
|
||||
enum qca_wlan_vendor_attr_link_state_config {
|
||||
QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONFIG_INVALID = 0,
|
||||
QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONFIG_LINK_ID = 1,
|
||||
QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONFIG_STATE = 2,
|
||||
|
||||
/* Keep last */
|
||||
QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONFIG_AFTER_LAST,
|
||||
QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONFIG_MAX =
|
||||
QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONFIG_AFTER_LAST - 1,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum qca_wlan_vendor_attr_mlo_link_state - Attributes used by
|
||||
* %QCA_NL80211_VENDOR_SUBCMD_MLO_LINK_STATE vendor command.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_LINK_STATE_OP_TYPE: u32 attribute. Indicates the type
|
||||
* of the operation %QCA_NL80211_VENDOR_SUBCMD_MLO_LINK_STATE intended for.
|
||||
* Required only in a command. Possible values for this attribute are defined in
|
||||
* enum qca_wlan_vendor_link_state_op_types.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONTROL_MODE: u32 attribute. Indicates MLO
|
||||
* links control mode type. Optional attribute in a command when
|
||||
* %QCA_WLAN_VENDOR_ATTR_LINK_STATE_OP_TYPE is set to
|
||||
* %QCA_WLAN_VENDOR_LINK_STATE_OP_SET. Required attribute in a response when
|
||||
* %QCA_WLAN_VENDOR_ATTR_LINK_STATE_OP_TYPE is set to
|
||||
* %QCA_WLAN_VENDOR_LINK_STATE_OP_GET.
|
||||
* See enum qca_wlan_vendor_link_state_control_modes for possible control modes.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONFIG: Array of nested attributes.
|
||||
* Indicates the state of the each MLO link affiliated with the interface.
|
||||
* Required attribute in a command when %QCA_WLAN_VENDOR_ATTR_LINK_STATE_OP_TYPE
|
||||
* is set to %QCA_WLAN_VENDOR_LINK_STATE_OP_SET and
|
||||
* %QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONTROL_MODE is set to
|
||||
* %QCA_WLAN_VENDOR_LINK_STATE_CONTROL_MODE_USER. Required attribute in a
|
||||
* response when %QCA_WLAN_VENDOR_ATTR_LINK_STATE_OP_TYPE is set to
|
||||
* %QCA_WLAN_VENDOR_LINK_STATE_OP_GET.
|
||||
* See enum qca_wlan_vendor_attr_link_state_config for the nested attributes.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_LINK_STATE_MIXED_MODE_ACTIVE_NUM_LINKS: u8 attribute.
|
||||
* Represents the number of active state links. See enum
|
||||
* qca_wlan_vendor_link_state for active state definition.
|
||||
* Required attribute in a command when %QCA_WLAN_VENDOR_ATTR_LINK_STATE_OP_TYPE
|
||||
* is set to %QCA_WLAN_VENDOR_LINK_STATE_OP_SET and
|
||||
* %QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONTROL_MODE is set to
|
||||
* %QCA_WLAN_VENDOR_LINK_STATE_CONTROL_MODE_MIXED.
|
||||
*
|
||||
* @QCA_WLAN_VENDOR_ATTR_LINK_STATE_OPERATION_MODE: u32 attribute. Indicates MLO
|
||||
* links operation mode type. Optional attribute in a command when
|
||||
* %QCA_WLAN_VENDOR_ATTR_LINK_STATE_OP_TYPE is set to
|
||||
* %QCA_WLAN_VENDOR_LINK_STATE_OP_SET. Required attribute in a response when
|
||||
* %QCA_WLAN_VENDOR_ATTR_LINK_STATE_OP_TYPE is set to
|
||||
* %QCA_WLAN_VENDOR_LINK_STATE_OP_GET.
|
||||
* See enum qca_wlan_vendor_link_state_operation_modes for possible operation
|
||||
* modes.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_mlo_link_state {
|
||||
QCA_WLAN_VENDOR_ATTR_LINK_STATE_INVALID = 0,
|
||||
QCA_WLAN_VENDOR_ATTR_LINK_STATE_OP_TYPE = 1,
|
||||
QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONTROL_MODE = 2,
|
||||
QCA_WLAN_VENDOR_ATTR_LINK_STATE_CONFIG = 3,
|
||||
QCA_WLAN_VENDOR_ATTR_LINK_STATE_MIXED_MODE_ACTIVE_NUM_LINKS = 4,
|
||||
QCA_WLAN_VENDOR_ATTR_LINK_STATE_OPERATION_MODE = 5,
|
||||
|
||||
/* keep last */
|
||||
QCA_WLAN_VENDOR_ATTR_LINK_STATE_AFTER_LAST,
|
||||
QCA_WLAN_VENDOR_ATTR_LINK_STATE_MAX =
|
||||
QCA_WLAN_VENDOR_ATTR_LINK_STATE_AFTER_LAST - 1,
|
||||
};
|
||||
|
||||
#endif /* QCA_VENDOR_H */
|
||||
|
|
|
|||
Loading…
Reference in a new issue