DGNum/hostapd
6
0
Fork 0
Code Issues Pull requests 1 Projects Releases Packages Wiki Activity Actions

Use estimated throughput to avoid signal based roaming decision

Browse source 
Previously, the estimated throughput was used to enable roaming to a
better AP. However, this information was not used when considering a
roam to an AP that has better signal strength, but smaller estimated
throughput. This could result in allowing roaming from 5 GHz band to 2.4
GHz band in cases where 2.4 GHz band has significantly higher signal
strength, but still a lower throughput estimate.

Make this less likely to happen by increasing/reducing the minimum
required signal strength difference based on the estimated throughputs
of the current and selected AP. In addition, add more details about the
selection process to the debug log to make it easier to determine whaty
happened and why.

Signed-off-by: Jouni Malinen <j@w1.fi>
This commit is contained in:
Jouni Malinen 2016-11-13 17:46:00 +02:00
parent fde3a53132
commit 8d1e693186
1 changed files with 42 additions and 10 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

52
wpa_supplicant/events.c
View file

@ -1396,8 +1396,9 @@ static int wpa_supplicant_need_to_roam(struct wpa_supplicant *wpa_s,
{
struct wpa_bss *current_bss = NULL;
#ifndef CONFIG_NO_ROAMING
int min_diff;
int min_diff, diff;
int to_5ghz;
int cur_est, sel_est;
#endif /* CONFIG_NO_ROAMING */
if (wpa_s->reassociate)
@ -1431,12 +1432,13 @@ static int wpa_supplicant_need_to_roam(struct wpa_supplicant *wpa_s,
#ifndef CONFIG_NO_ROAMING
wpa_dbg(wpa_s, MSG_DEBUG, "Considering within-ESS reassociation");
wpa_dbg(wpa_s, MSG_DEBUG, "Current BSS: " MACSTR
" level=%d snr=%d est_throughput=%u",
MAC2STR(current_bss->bssid), current_bss->level,
" freq=%d level=%d snr=%d est_throughput=%u",
MAC2STR(current_bss->bssid),
current_bss->freq, current_bss->level,
current_bss->snr, current_bss->est_throughput);
wpa_dbg(wpa_s, MSG_DEBUG, "Selected BSS: " MACSTR
" level=%d snr=%d est_throughput=%u",
MAC2STR(selected->bssid), selected->level,
" freq=%d level=%d snr=%d est_throughput=%u",
MAC2STR(selected->bssid), selected->freq, selected->level,
selected->snr, selected->est_throughput);
if (wpa_s->current_ssid->bssid_set &&
@ -1462,6 +1464,14 @@ static int wpa_supplicant_need_to_roam(struct wpa_supplicant *wpa_s,
return 0;
}
if (current_bss->est_throughput > selected->est_throughput + 5000) {
wpa_dbg(wpa_s, MSG_DEBUG,
"Skip roam - Current BSS has better estimated throughput");
return 1;
}
cur_est = current_bss->est_throughput;
sel_est = selected->est_throughput;
min_diff = 2;
if (current_bss->level < 0) {
if (current_bss->level < -85)
@ -1474,20 +1484,42 @@ static int wpa_supplicant_need_to_roam(struct wpa_supplicant *wpa_s,
min_diff = 4;
else
min_diff = 5;
if (cur_est > sel_est * 1.5)
min_diff += 10;
else if (cur_est > sel_est * 1.2)
min_diff += 5;
else if (cur_est > sel_est * 1.1)
min_diff += 2;
else if (cur_est > sel_est)
min_diff++;
}
if (to_5ghz) {
int reduce = 2;
/* Make it easier to move to 5 GHz band */
if (min_diff > 2)
min_diff -= 2;
if (sel_est > cur_est * 1.5)
reduce = 5;
else if (sel_est > cur_est * 1.2)
reduce = 4;
else if (sel_est > cur_est * 1.1)
reduce = 3;
if (min_diff > reduce)
min_diff -= reduce;
else
min_diff = 0;
}
if (abs(current_bss->level - selected->level) < min_diff) {
wpa_dbg(wpa_s, MSG_DEBUG, "Skip roam - too small difference "
"in signal level");
diff = abs(current_bss->level - selected->level);
if (diff < min_diff) {
wpa_dbg(wpa_s, MSG_DEBUG,
"Skip roam - too small difference in signal level (%d < %d)",
diff, min_diff);
return 0;
}
wpa_dbg(wpa_s, MSG_DEBUG,
"Allow reassociation due to difference in signal level (%d >= %d)",
diff, min_diff);
return 1;
#else /* CONFIG_NO_ROAMING */
return 0;