Remove unused TX queue parameters related to Beacon frames

These are not used by any driver wrapper, i.e., only the four
data queues (BK, BE, VI, VO) are configurable. Better remove these
so that there is no confusion about being able to configure
something additional.

hostapd/config_file.c

@@ -752,10 +752,7 @@ enum {
 	IEEE80211_TX_QUEUE_DATA0 = 0, /* used for EDCA AC_VO data */
 	IEEE80211_TX_QUEUE_DATA1 = 1, /* used for EDCA AC_VI data */
 	IEEE80211_TX_QUEUE_DATA2 = 2, /* used for EDCA AC_BE data */
-	IEEE80211_TX_QUEUE_DATA3 = 3, /* used for EDCA AC_BK data */
+	IEEE80211_TX_QUEUE_DATA3 = 3 /* used for EDCA AC_BK data */
-	IEEE80211_TX_QUEUE_DATA4 = 4,
-	IEEE80211_TX_QUEUE_AFTER_BEACON = 6,
-	IEEE80211_TX_QUEUE_BEACON = 7
 };
 
 static int hostapd_config_tx_queue(struct hostapd_config *conf, char *name,
@@ -771,17 +768,21 @@ static int hostapd_config_tx_queue(struct hostapd_config *conf, char *name,
 	    pos[4] >= '0' && pos[4] <= '9' && pos[5] == '_') {
 		num = pos[4] - '0';
 		pos += 6;
-	} else if (os_strncmp(pos, "after_beacon_", 13) == 0) {
+	} else if (os_strncmp(pos, "after_beacon_", 13) == 0 ||
-		num = IEEE80211_TX_QUEUE_AFTER_BEACON;
+		   os_strncmp(pos, "beacon_", 7) == 0) {
-		pos += 13;
+		wpa_printf(MSG_INFO, "DEPRECATED: '%s' not used", name);
-	} else if (os_strncmp(pos, "beacon_", 7) == 0) {
+		return 0;
-		num = IEEE80211_TX_QUEUE_BEACON;
-		pos += 7;
 	} else {
 		wpa_printf(MSG_ERROR, "Unknown tx_queue name '%s'", pos);
 		return -1;
 	}
 
+	if (num >= NUM_TX_QUEUES) {
+		/* for backwards compatibility, do not tricker failure */
+		wpa_printf(MSG_INFO, "DEPRECATED: '%s' not used", name);
+		return 0;
+	}
+
 	queue = &conf->tx_queue[num];
 
 	if (os_strcmp(pos, "aifs") == 0) {

hostapd/hostapd.conf

@@ -240,18 +240,6 @@ ignore_broadcast_ssid=0
 #tx_queue_data0_cwmax=7
 #tx_queue_data0_burst=1.5
 # Note: for IEEE 802.11b mode: cWmin=7 cWmax=15 burst=3.3
-#
-# Special queues; normally not user configurable
-#
-#tx_queue_after_beacon_aifs=2
-#tx_queue_after_beacon_cwmin=15
-#tx_queue_after_beacon_cwmax=1023
-#tx_queue_after_beacon_burst=0
-#
-#tx_queue_beacon_aifs=2
-#tx_queue_beacon_cwmin=3
-#tx_queue_beacon_cwmax=7
-#tx_queue_beacon_burst=1.5
 
 # 802.1D Tag (= UP) to AC mappings
 # WMM specifies following mapping of data frames to different ACs. This mapping

src/ap/ap_config.h

@@ -123,7 +123,7 @@ struct hostapd_eap_user {
 };
 
 
-#define NUM_TX_QUEUES 8
+#define NUM_TX_QUEUES 4
 
 struct hostapd_tx_queue_params {
 	int aifs;

src/drivers/driver.h

@@ -1529,7 +1529,7 @@ struct wpa_driver_ops {
 	/**
 	 * set_tx_queue_params - Set TX queue parameters
 	 * @priv: Private driver interface data
-	 * @queue: Queue number
+	 * @queue: Queue number (0 = VO, 1 = VI, 2 = BE, 3 = BK)
 	 * @aifs: AIFS
 	 * @cw_min: cwMin
 	 * @cw_max: cwMax

src/drivers/driver_nl80211.c

@@ -4866,7 +4866,20 @@ static int i802_set_tx_queue_params(void *priv, int queue, int aifs,
 	if (!params)
 		goto nla_put_failure;
 
-	NLA_PUT_U8(msg, NL80211_TXQ_ATTR_QUEUE, queue);
+	switch (queue) {
+	case 0:
+		NLA_PUT_U8(msg, NL80211_TXQ_ATTR_QUEUE, NL80211_TXQ_Q_VO);
+		break;
+	case 1:
+		NLA_PUT_U8(msg, NL80211_TXQ_ATTR_QUEUE, NL80211_TXQ_Q_VI);
+		break;
+	case 2:
+		NLA_PUT_U8(msg, NL80211_TXQ_ATTR_QUEUE, NL80211_TXQ_Q_BE);
+		break;
+	case 3:
+		NLA_PUT_U8(msg, NL80211_TXQ_ATTR_QUEUE, NL80211_TXQ_Q_BK);
+		break;
+	}
 	/* Burst time is configured in units of 0.1 msec and TXOP parameter in
 	 * 32 usec, so need to convert the value here. */
 	NLA_PUT_U16(msg, NL80211_TXQ_ATTR_TXOP, (burst_time * 100 + 16) / 32);