DGNum/hostapd
6
0
Fork 0
Code Issues Pull requests 1 Projects Releases Packages Wiki Activity Actions

Vendor attributes for configuring LDPC, TX STBC, RX STBC

Browse source 
Defines the attributes in SET(GET)_WIFI_CONFIGURATION to dynamically
configure capabilities: LDPC, TX STBC, RX STBC.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
This commit is contained in:
Sunil Dutt 2020-05-07 01:16:35 +05:30 committed by Jouni Malinen
parent b96a3bd5df
commit 3f9a89ca1c
1 changed files with 36 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

36
src/common/qca-vendor.h
View file

@ -2147,6 +2147,42 @@ enum qca_wlan_vendor_attr_config {
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MSDU_AGGREGATION = 66,
/* 8-bit unsigned value. This attribute is used to dynamically
* enable/disable the LDPC capability of the device. When configured in
* the disconnected state, the updated configuration will be considered
* for the immediately following connection attempt. If this
* configuration is modified while the device is in the connected state,
* the LDPC TX will be updated with this configuration immediately,
* while the LDPC RX configuration update will take place starting from
* the subsequent association attempt.
* 1-Enable, 0-Disable.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_LDPC = 67,
/* 8-bit unsigned value. This attribute is used to dynamically
* enable/disable the TX STBC capability of the device. When configured
* in the disconnected state, the updated configuration will be
* considered for the immediately following connection attempt. If the
* connection is formed with TX STBC enabled and if this configuration
* is disabled during that association, the TX will be impacted
* immediately. Further connection attempts will disable TX STBC.
* However, enabling the TX STBC for a connected session with disabled
* capability is not allowed and will fail.
* 1-Enable, 0-Disable.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_STBC = 68,
/* 8-bit unsigned value. This attribute is used to dynamically
* enable/disable the RX STBC capability of the device. When configured
* in the disconnected state, the updated configuration will be
* considered for the immediately following connection attempt. If the
* configuration is modified in the connected state, there will be no
* impact for the current association, but further connection attempts
* will use the updated configuration.
* 1-Enable, 0-Disable.
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_STBC = 69,
/* keep last */
QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =