tests: Replace last remaining hwsim_test uses with DATA_TEST

External tool is not needed anymore to run the data connectivity tests
since hostapd test mode now allows the possible bridge or VLAN interface
to be specified.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>

tests/hwsim/README

@@ -15,14 +15,15 @@ captured through the hwsim0 monitor interface that capture all frames
 sent on all channels. wlantest is used to store the frames for
 analysis. Three wpa_supplicant processes are used to control three
 virtual radios and one hostapd process is used to dynamically control
-the other two virtual radios. hwsim_test is used to verify that data
-connection (both unicast and broadcast) works between two netdevs.
+the other two virtual radios. wpa_supplicant/hostapd test functionality
+is used to verify that data connection (both unicast and broadcast)
+works between two netdevs.
 
 The python scripts and tools in this directory control test case
 execution. They interact wpa_supplicant and hostapd through control
-interfaces to perform the operations. In addition, wlantest_cli and
-hwsim_test are used to verify that operations have been performed
-correctly and that the network connection works in the expected way.
+interfaces to perform the operations. In addition, wlantest_cli is used
+to verify that operations have been performed correctly and that the
+network connection works in the expected way.
 
 These test cases are run automatically against the hostap.git commits
 for regression testing and to help in keeping the hostap.git master
@@ -48,15 +49,13 @@ make hostapd hlr_auc_gw
 cd ../wlantest
 make clean
 make
-cd ../mac80211_hwsim/tools
-make
 
 Alternatively, the build.sh script here can be used to run these steps
 with conditional creation of .config files only if they do not exist.
 
 The test scripts can find the binaries in the locations where they were
-built. It is also possible to install hwsim_test and wlantest_cli
-somewhat on the path to use pre-built tools.
+built. It is also possible to install wlantest_cli somewhere on the path
+to use pre-built tools.
 
 Please note that some of the configuration parameters used to enable
 more testing coverage may require development packages that may not be

tests/hwsim/build.sh

@@ -64,10 +64,7 @@ make -j8 hostapd hlr_auc_gw
 cd ../wlantest
 make clean
 make -j8
-cd ../mac80211_hwsim/tools
-make clean
-make -j8
-cd ../../tests/hwsim/tnc
+cd ../tests/hwsim/tnc
 make clean
 make -j8
 cd ..

tests/hwsim/hwsim_utils.py

@@ -12,37 +12,8 @@ logger = logging.getLogger()
 
 from wpasupplicant import WpaSupplicant
 
-def test_connectivity_run(ifname1, ifname2, dscp=None, tos=None, max_tries=1):
-    if os.path.isfile("../../mac80211_hwsim/tools/hwsim_test"):
-        hwsim_test = "../../mac80211_hwsim/tools/hwsim_test"
-    else:
-        hwsim_test = "hwsim_test"
-    cmd = ["sudo",
-           hwsim_test,
-           ifname1,
-           ifname2]
-    if dscp:
-        cmd.append('-D')
-        cmd.append(str(dscp))
-    elif tos:
-        cmd.append('-t')
-        cmd.append(str(tos))
-    success = False
-    for i in range(0, max_tries):
-        try:
-            s = subprocess.check_output(cmd)
-            logger.debug(s)
-            success = True
-            break
-        except subprocess.CalledProcessError, e:
-            logger.info("hwsim failed: " + str(e.returncode))
-            logger.info(e.output)
-            if i + 1 < max_tries:
-                time.sleep(1)
-    if not success:
-        raise Exception("hwsim_test failed")
-
-def run_connectivity_test(dev1, dev2, tos, dev1group=False, dev2group=False):
+def run_connectivity_test(dev1, dev2, tos, dev1group=False, dev2group=False,
+                          ifname1=None, ifname2=None):
     addr1 = dev1.own_addr()
     if not dev1group and isinstance(dev1, WpaSupplicant):
         addr1 = dev1.get_driver_status_field('addr')
@@ -53,6 +24,8 @@ def run_connectivity_test(dev1, dev2, tos, dev1group=False, dev2group=False):
 
     try:
         cmd = "DATA_TEST_CONFIG 1"
+        if ifname1:
+            cmd = cmd + " ifname=" + ifname1
         if dev1group:
             res = dev1.group_request(cmd)
         else:
@@ -60,6 +33,9 @@ def run_connectivity_test(dev1, dev2, tos, dev1group=False, dev2group=False):
         if "OK" not in res:
             raise Exception("Failed to enable data test functionality")
 
+        cmd = "DATA_TEST_CONFIG 1"
+        if ifname2:
+            cmd = cmd + " ifname=" + ifname2
         if dev2group:
             res = dev2.group_request(cmd)
         else:
@@ -132,7 +108,9 @@ def run_connectivity_test(dev1, dev2, tos, dev1group=False, dev2group=False):
         else:
             dev2.request("DATA_TEST_CONFIG 0")
 
-def test_connectivity(dev1, dev2, dscp=None, tos=None, max_tries=1, dev1group=False, dev2group=False):
+def test_connectivity(dev1, dev2, dscp=None, tos=None, max_tries=1,
+                      dev1group=False, dev2group=False,
+                      ifname1=None, ifname2=None):
     if dscp:
         tos = dscp << 2
     if not tos:
@@ -142,7 +120,8 @@ def test_connectivity(dev1, dev2, dscp=None, tos=None, max_tries=1, dev1group=Fa
     last_err = None
     for i in range(0, max_tries):
         try:
-            run_connectivity_test(dev1, dev2, tos, dev1group, dev2group)
+            run_connectivity_test(dev1, dev2, tos, dev1group, dev2group,
+                                  ifname1, ifname2)
             success = True
             break
         except Exception, e:
@@ -152,8 +131,9 @@ def test_connectivity(dev1, dev2, dscp=None, tos=None, max_tries=1, dev1group=Fa
     if not success:
         raise Exception(last_err)
 
-def test_connectivity_iface(dev1, ifname, dscp=None, tos=None, max_tries=1):
-    test_connectivity_run(dev1.ifname, ifname, dscp=dscp, tos=tos,
+def test_connectivity_iface(dev1, dev2, ifname, dscp=None, tos=None,
+                            max_tries=1):
+    test_connectivity(dev1, dev2, dscp, tos, ifname2=ifname,
                       max_tries=max_tries)
 
 def test_connectivity_p2p(dev1, dev2, dscp=None, tos=None):

tests/hwsim/test_ap_params.py

@@ -115,7 +115,7 @@ def test_ap_wds_sta(dev, apdev):
     params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
     params['wds_sta'] = "1"
     params['wds_bridge'] = "wds-br0"
-    hostapd.add_ap(apdev[0]['ifname'], params)
+    hapd = hostapd.add_ap(apdev[0]['ifname'], params)
 
     try:
         subprocess.call(['sudo', 'brctl', 'addbr', 'wds-br0'])
@@ -123,7 +123,8 @@ def test_ap_wds_sta(dev, apdev):
         subprocess.call(['sudo', 'ip', 'link', 'set', 'dev', 'wds-br0', 'up'])
         subprocess.call(['sudo', 'iw', dev[0].ifname, 'set', '4addr', 'on'])
         dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
-        hwsim_utils.test_connectivity_iface(dev[0], "wds-br0", max_tries=15)
+        hwsim_utils.test_connectivity_iface(dev[0], hapd, "wds-br0",
+                                            max_tries=15)
     finally:
         subprocess.call(['sudo', 'iw', dev[0].ifname, 'set', '4addr', 'off'])
         subprocess.call(['sudo', 'ip', 'link', 'set', 'dev', 'wds-br0', 'down'])

tests/hwsim/test_ap_tdls.py

@@ -298,7 +298,7 @@ def test_ap_wpa2_tdls_bssid_mismatch(dev, apdev):
         passphrase = "12345678"
         params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
         params['bridge'] = 'ap-br0'
-        hostapd.add_ap(apdev[0]['ifname'], params)
+        hapd = hostapd.add_ap(apdev[0]['ifname'], params)
         hostapd.add_ap(apdev[1]['ifname'], params)
         wlantest_setup()
         subprocess.call(['sudo', 'brctl', 'setfd', 'ap-br0', '0'])
@@ -308,8 +308,8 @@ def test_ap_wpa2_tdls_bssid_mismatch(dev, apdev):
         dev[1].connect(ssid, psk=passphrase, scan_freq="2412",
                        bssid=apdev[1]['bssid'])
         hwsim_utils.test_connectivity_sta(dev[0], dev[1])
-        hwsim_utils.test_connectivity_iface(dev[0], "ap-br0")
-        hwsim_utils.test_connectivity_iface(dev[1], "ap-br0")
+        hwsim_utils.test_connectivity_iface(dev[0], hapd, "ap-br0")
+        hwsim_utils.test_connectivity_iface(dev[1], hapd, "ap-br0")
 
         addr0 = dev[0].p2p_interface_addr()
         dev[1].tdls_setup(addr0)

tests/hwsim/test_ap_vlan.py

@@ -24,8 +24,8 @@ def test_ap_vlan_open(dev, apdev):
     dev[0].connect("test-vlan-open", key_mgmt="NONE", scan_freq="2412")
     dev[1].connect("test-vlan-open", key_mgmt="NONE", scan_freq="2412")
     dev[2].connect("test-vlan-open", key_mgmt="NONE", scan_freq="2412")
-    hwsim_utils.test_connectivity_iface(dev[0], "brvlan1")
-    hwsim_utils.test_connectivity_iface(dev[1], "brvlan2")
+    hwsim_utils.test_connectivity_iface(dev[0], hapd, "brvlan1")
+    hwsim_utils.test_connectivity_iface(dev[1], hapd, "brvlan2")
     hwsim_utils.test_connectivity(dev[2], hapd)
 
 def test_ap_vlan_file_open(dev, apdev):
@@ -39,8 +39,8 @@ def test_ap_vlan_file_open(dev, apdev):
     dev[0].connect("test-vlan-open", key_mgmt="NONE", scan_freq="2412")
     dev[1].connect("test-vlan-open", key_mgmt="NONE", scan_freq="2412")
     dev[2].connect("test-vlan-open", key_mgmt="NONE", scan_freq="2412")
-    hwsim_utils.test_connectivity_iface(dev[0], "brvlan1")
-    hwsim_utils.test_connectivity_iface(dev[1], "brvlan2")
+    hwsim_utils.test_connectivity_iface(dev[0], hapd, "brvlan1")
+    hwsim_utils.test_connectivity_iface(dev[1], hapd, "brvlan2")
     hwsim_utils.test_connectivity(dev[2], hapd)
 
 def test_ap_vlan_wpa2(dev, apdev):
@@ -54,8 +54,8 @@ def test_ap_vlan_wpa2(dev, apdev):
     dev[0].connect("test-vlan", psk="12345678", scan_freq="2412")
     dev[1].connect("test-vlan", psk="12345678", scan_freq="2412")
     dev[2].connect("test-vlan", psk="12345678", scan_freq="2412")
-    hwsim_utils.test_connectivity_iface(dev[0], "brvlan1")
-    hwsim_utils.test_connectivity_iface(dev[1], "brvlan2")
+    hwsim_utils.test_connectivity_iface(dev[0], hapd, "brvlan1")
+    hwsim_utils.test_connectivity_iface(dev[1], hapd, "brvlan2")
     hwsim_utils.test_connectivity(dev[2], hapd)
 
 def test_ap_vlan_wpa2_radius(dev, apdev):
@@ -76,8 +76,8 @@ def test_ap_vlan_wpa2_radius(dev, apdev):
                    identity="pax.user@example.com",
                    password_hex="0123456789abcdef0123456789abcdef",
                    scan_freq="2412")
-    hwsim_utils.test_connectivity_iface(dev[0], "brvlan1")
-    hwsim_utils.test_connectivity_iface(dev[1], "brvlan2")
+    hwsim_utils.test_connectivity_iface(dev[0], hapd, "brvlan1")
+    hwsim_utils.test_connectivity_iface(dev[1], hapd, "brvlan2")
     hwsim_utils.test_connectivity(dev[2], hapd)
 
 def test_ap_vlan_wpa2_radius_required(dev, apdev):
@@ -112,6 +112,6 @@ def test_ap_vlan_tagged(dev, apdev):
     dev[0].connect("test-vlan-open", key_mgmt="NONE", scan_freq="2412")
     dev[1].connect("test-vlan-open", key_mgmt="NONE", scan_freq="2412")
     dev[2].connect("test-vlan-open", key_mgmt="NONE", scan_freq="2412")
-    hwsim_utils.test_connectivity_iface(dev[0], "brlo.1")
-    hwsim_utils.test_connectivity_iface(dev[1], "brlo.2")
+    hwsim_utils.test_connectivity_iface(dev[0], hapd, "brlo.1")
+    hwsim_utils.test_connectivity_iface(dev[1], hapd, "brlo.2")
     hwsim_utils.test_connectivity(dev[2], hapd)