DGNum/hostapd
6
0
Fork 0
Code Issues Pull requests 1 Projects Releases Packages Wiki Activity Actions
hostapd/wpa_supplicant/interworking.h

38 lines
1.3 KiB
C
Raw Normal View History

Interworking: Add ANQP query requests Add mechanism for using GAS/ANQP to query Interworking related information from APs. The received information is stored in the BSS table and can be viewed with ctrl_iface BSS command. New ctrl_iface command ANQP_GET can be used to fetch ANQP elements from a specific AP. Additional commands FETCH_ANQP and STOP_FETCH_ANQP can be used to initiate and stop an iteration through all APs in the BSS table that indicate support Interworking to fetch ANQP elements from them.
2011-10-16 21:44:28 +02:00
/*
* Interworking (IEEE 802.11u)
Add generic GAS request mechanism The new gas_request and gas_response_get commands can be used to request arbitary GAS queries to be performed. These can be used with ANQP or with other (including vendor specific) advertisement protocols. gas_request <BSSID> <AdvProtoID> [Query] gas_response_get <addr> <dialog token> [offset,length] For example, ANQP query for Capability list in interactive wpa_cli session: > gas_request 02:00:00:00:01:00 00 000102000101 <3>GAS-RESPONSE-INFO addr=02:00:00:00:01:00 dialog_token=0 status_code=0 resp_len=32 > gas_response_get 02:00:00:00:01:00 00 01011c00010102010501070108010c01dddd0c00506f9a110200020304050607 > gas_response_get 02:00:00:00:01:00 00 0,10 01011c00010102010501 > gas_response_get 02:00:00:00:01:00 00 10,10 070108010c01dddd0c00 > gas_response_get 02:00:00:00:01:00 00 20,10 506f9a11020002030405 > gas_response_get 02:00:00:00:01:00 00 30,2 0607 It should be noted that the maximum length of the response buffer is currently 4096 bytes which allows about 2000 bytes of the response data to be fetched with a single gas_response_get command. If the response is longer, it can be fetched in pieces as shown in the example above. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-27 17:13:10 +02:00
* Copyright (c) 2011-2012, Qualcomm Atheros
Interworking: Add ANQP query requests Add mechanism for using GAS/ANQP to query Interworking related information from APs. The received information is stored in the BSS table and can be viewed with ctrl_iface BSS command. New ctrl_iface command ANQP_GET can be used to fetch ANQP elements from a specific AP. Additional commands FETCH_ANQP and STOP_FETCH_ANQP can be used to initiate and stop an iteration through all APs in the BSS table that indicate support Interworking to fetch ANQP elements from them.
2011-10-16 21:44:28 +02:00
*
Remove the GPL notification from files contributed by Atheros Remove the GPL notification text from files that were initially contributed by Atheros Communications or Qualcomm Atheros. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 15:31:36 +01:00
* This software may be distributed under the terms of the BSD license.
* See README for more details.
Interworking: Add ANQP query requests Add mechanism for using GAS/ANQP to query Interworking related information from APs. The received information is stored in the BSS table and can be viewed with ctrl_iface BSS command. New ctrl_iface command ANQP_GET can be used to fetch ANQP elements from a specific AP. Additional commands FETCH_ANQP and STOP_FETCH_ANQP can be used to initiate and stop an iteration through all APs in the BSS table that indicate support Interworking to fetch ANQP elements from them.
2011-10-16 21:44:28 +02:00
*/
#ifndef INTERWORKING_H
#define INTERWORKING_H
enum gas_query_result;
int anqp_send_req(struct wpa_supplicant *wpa_s, const u8 *dst,
MBO: Add support to send ANQP request to get cellular preference This extends ANQP_GET command to support querying MBO cellular preference also. The cellular preference can be requested along with neigbor report by appending mbo:1 to the command arguments. For example: ANQP_GET <bssid> 272,mbo:1 Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-09 14:05:50 +02:00
u16 info_ids[], size_t num_ids, u32 subtypes,
MBO: Add option to add MBO query list to ANQP query MBO techspec v0.0_r27 changed the MBO ANQP-element format. The MBO element in ANQP query should now include an MBO Query List element that contains a list of MBO elements to query. Add API to add the MBO Query List to an ANQP query. Format: ANQP_GET <addr> <info_id>[,<info_id>]...[,mbo:<subtype>...] Example for querying neighbor report with MBO cellular data connection preference: ANQP_GET <bssid> 272,mbo:2 Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2017-03-09 14:19:58 +01:00
u32 mbo_subtypes);
Interworking: Add ANQP query requests Add mechanism for using GAS/ANQP to query Interworking related information from APs. The received information is stored in the BSS table and can be viewed with ctrl_iface BSS command. New ctrl_iface command ANQP_GET can be used to fetch ANQP elements from a specific AP. Additional commands FETCH_ANQP and STOP_FETCH_ANQP can be used to initiate and stop an iteration through all APs in the BSS table that indicate support Interworking to fetch ANQP elements from them.
2011-10-16 21:44:28 +02:00
void anqp_resp_cb(void *ctx, const u8 *dst, u8 dialog_token,
enum gas_query_result result,
const struct wpabuf *adv_proto,
const struct wpabuf *resp, u16 status_code);
Add generic GAS request mechanism The new gas_request and gas_response_get commands can be used to request arbitary GAS queries to be performed. These can be used with ANQP or with other (including vendor specific) advertisement protocols. gas_request <BSSID> <AdvProtoID> [Query] gas_response_get <addr> <dialog token> [offset,length] For example, ANQP query for Capability list in interactive wpa_cli session: > gas_request 02:00:00:00:01:00 00 000102000101 <3>GAS-RESPONSE-INFO addr=02:00:00:00:01:00 dialog_token=0 status_code=0 resp_len=32 > gas_response_get 02:00:00:00:01:00 00 01011c00010102010501070108010c01dddd0c00506f9a110200020304050607 > gas_response_get 02:00:00:00:01:00 00 0,10 01011c00010102010501 > gas_response_get 02:00:00:00:01:00 00 10,10 070108010c01dddd0c00 > gas_response_get 02:00:00:00:01:00 00 20,10 506f9a11020002030405 > gas_response_get 02:00:00:00:01:00 00 30,2 0607 It should be noted that the maximum length of the response buffer is currently 4096 bytes which allows about 2000 bytes of the response data to be fetched with a single gas_response_get command. If the response is longer, it can be fetched in pieces as shown in the example above. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-27 17:13:10 +02:00
int gas_send_request(struct wpa_supplicant *wpa_s, const u8 *dst,
const struct wpabuf *adv_proto,
const struct wpabuf *query);
Interworking: Add ANQP query requests Add mechanism for using GAS/ANQP to query Interworking related information from APs. The received information is stored in the BSS table and can be viewed with ctrl_iface BSS command. New ctrl_iface command ANQP_GET can be used to fetch ANQP elements from a specific AP. Additional commands FETCH_ANQP and STOP_FETCH_ANQP can be used to initiate and stop an iteration through all APs in the BSS table that indicate support Interworking to fetch ANQP elements from them.
2011-10-16 21:44:28 +02:00
int interworking_fetch_anqp(struct wpa_supplicant *wpa_s);
void interworking_stop_fetch_anqp(struct wpa_supplicant *wpa_s);
Interworking: Add optional freq argument to INTERWORKING_SELECT This can be used to limit which channels are scanned using the specified list of frequency ranges in the same format that the SCAN command uses. Signed-hostap: Jouni Malinen <j@w1.fi>
2014-01-05 11:25:13 +01:00
int interworking_select(struct wpa_supplicant *wpa_s, int auto_select,
int *freqs);
Add INTERWORKING_ADD_NETWORK command This can be used to provide more control to upper layers on network blocks generated as part of Interworking network selection. INTERWORKING_ADD_NETWORK behaves otherwise identically to INTERWORKING_CONNECT, but it does not request a new connection after having added the network block and it returns the network id of the added network. INTERWORKING_ADD_NETWORK followed by REASSOCIATE would behave more or less identically to INTERWORKING_CONNECT, but this allows the created network profile to be modified, if desired, and/or stored externally. SELECT_NETWORK can also be used with the network id returned from INTERWORKING_ADD_NETWORK to enforce that specific network profile to be used for the next connection (though, it should be noted that this behavior may not meet all Hotspot 2.0 requirements if there were other enabled networks that could have higher priority). Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 15:56:04 +01:00
int interworking_connect(struct wpa_supplicant *wpa_s, struct wpa_bss *bss,
int only_add);
Interworking: Add optional use of network selection on normal scans auto_interworking=1 configuration parameter can be used to request wpa_supplicant to use Interworking network selection automatically as a part of the normal (non-Interworking) network selection if the scan results do not match with enabled networks. This makes scanning work similarly to the "interworking_select auto" command. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-28 15:14:13 +02:00
void interworking_start_fetch_anqp(struct wpa_supplicant *wpa_s);
HS 2.0: Add Home SP FQDN and roaming/home to status command This allows the ctrl_iface STATUS information to be used to determine which Home SP credential (domain in the cred block) was used and whether the network is operated by the home SP. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-22 19:51:49 +01:00
int interworking_home_sp_cred(struct wpa_supplicant *wpa_s,
struct wpa_cred *cred,
struct wpabuf *domain_names);
HS 2.0R2: Add tracking of provisioning SP The new provisioning_sp cred field can now be used to track which SP provisioned the credential. This makes it easier to find the matching PPS MO from the management tree (./Wi-Fi/<provisioning_sp>). Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-08-02 18:09:11 +02:00
int domain_name_list_contains(struct wpabuf *domain_names,
const char *domain, int exact_match);
Interworking: Add ANQP query requests Add mechanism for using GAS/ANQP to query Interworking related information from APs. The received information is stored in the BSS table and can be viewed with ctrl_iface BSS command. New ctrl_iface command ANQP_GET can be used to fetch ANQP elements from a specific AP. Additional commands FETCH_ANQP and STOP_FETCH_ANQP can be used to initiate and stop an iteration through all APs in the BSS table that indicate support Interworking to fetch ANQP elements from them.
2011-10-16 21:44:28 +02:00
#endif /* INTERWORKING_H */
Reference in a new issue Copy permalink