hostapd/tests/hwsim/test_dpp3.py

280 lines
10 KiB
Python
Raw Normal View History

# Test cases for Device Provisioning Protocol (DPP) version 3
# Copyright (c) 2021-2022, Qualcomm Innovation Center, Inc.
#
# This software may be distributed under the terms of the BSD license.
# See README for more details.
import binascii
import os
import time
import hostapd
from wlantest import WlantestCapture
from test_dpp import check_dpp_capab, run_dpp_auto_connect, wait_auth_success, update_hapd_config
from utils import *
def test_dpp_network_intro_version(dev, apdev):
"""DPP Network Introduction and protocol version"""
check_dpp_capab(dev[0], min_ver=3)
try:
id, hapd = run_dpp_auto_connect(dev, apdev, 1, stop_after_prov=True)
dev[0].select_network(id, freq=2412)
dev[0].wait_connected()
finally:
dev[0].set("dpp_config_processing", "0", allow_fail=True)
def test_dpp_network_intro_version_change(dev, apdev):
"""DPP Network Introduction and protocol version change"""
check_dpp_capab(dev[0], min_ver=3)
try:
dev[0].set("dpp_version_override", "2")
id, hapd = run_dpp_auto_connect(dev, apdev, 1, stop_after_prov=True)
dev[0].set("dpp_version_override", "3")
dev[0].select_network(id, freq=2412)
dev[0].wait_connected()
finally:
dev[0].set("dpp_config_processing", "0", allow_fail=True)
def test_dpp_network_intro_version_missing_req(dev, apdev):
"""DPP Network Introduction and protocol version missing from request"""
check_dpp_capab(dev[0], min_ver=3)
try:
dev[0].set("dpp_version_override", "2")
id, hapd = run_dpp_auto_connect(dev, apdev, 1, stop_after_prov=True)
dev[0].set("dpp_version_override", "3")
dev[0].set("dpp_test", "92")
dev[0].select_network(id, freq=2412)
ev = dev[0].wait_event(["DPP-INTRO"], timeout=10)
if ev is None:
raise Exception("DPP network introduction result not seen on STA")
if "status=8" not in ev:
raise Exception("Unexpected network introduction result on STA: " + ev)
finally:
dev[0].set("dpp_config_processing", "0", allow_fail=True)
def run_dpp_tcp_pkex(dev0, dev1, cap_lo, sae=False, status=False):
check_dpp_capab(dev0, min_ver=3)
check_dpp_capab(dev1, min_ver=3)
wt = WlantestCapture('lo', cap_lo)
time.sleep(1)
# Controller
if sae:
ssid = binascii.hexlify("sae".encode()).decode()
password = binascii.hexlify("sae-password".encode()).decode()
val = "conf=sta-sae ssid=%s pass=%s" % (ssid, password)
if status:
val += " conn_status=1"
dev1.set("dpp_configurator_params", val)
else:
conf_id = dev1.dpp_configurator_add()
dev1.set("dpp_configurator_params",
"conf=sta-dpp configurator=%d" % conf_id)
req = "DPP_CONTROLLER_START"
own = None
if "OK" not in dev1.request(req):
raise Exception("Failed to start Controller")
code = "secret"
id1 = dev1.dpp_bootstrap_gen(type="pkex")
cmd = "own=%d" % id1
cmd += " code=%s" % code
res = dev1.request("DPP_PKEX_ADD " + cmd)
if "FAIL" in res:
raise Exception("Failed to set PKEX data (responder)")
dev0.dpp_pkex_init(identifier=None, code=code, role="enrollee",
tcp_addr="127.0.0.1")
res = wait_auth_success(dev1, dev0, configurator=dev1, enrollee=dev0,
allow_enrollee_failure=True,
allow_configurator_failure=True)
if status:
if 'wait_conn_status' not in res or not res['wait_conn_status']:
raise Exception("wait_conn_status not reported")
time.sleep(0.5)
wt.close()
def test_dpp_tcp_pkex(dev, apdev, params):
"""DPP/PKEXv2 over TCP"""
prefix = "dpp_tcp_pkex"
cap_lo = os.path.join(params['logdir'], prefix + ".lo.pcap")
try:
run_dpp_tcp_pkex(dev[0], dev[1], cap_lo)
finally:
dev[1].request("DPP_CONTROLLER_STOP")
def run_dpp_tcp_pkex_auto_connect_2(dev, apdev, params, status, start_ap=True):
check_sae_capab(dev[0])
dev[0].set("sae_groups", "")
cap_lo = params['prefix'] + ".lo.pcap"
params = {"ssid": "sae",
"wpa": "2",
"wpa_key_mgmt": "SAE",
"ieee80211w": "2",
"rsn_pairwise": "CCMP",
"sae_password": "sae-password"}
if start_ap:
hapd = hostapd.add_ap(apdev[0], params)
try:
dev[0].set("dpp_config_processing", "2")
run_dpp_tcp_pkex(dev[0], dev[1], cap_lo, sae=True, status=status)
if start_ap:
dev[0].wait_connected()
if status:
ev = dev[1].wait_event(["DPP-CONN-STATUS-RESULT"], timeout=16)
if ev is None:
raise Exception("Connection status resutl not reported")
if start_ap and "result=0" not in ev:
raise Exception("Unexpected result in success case: " + ev)
if (not start_ap) and "result=10" not in ev:
raise Exception("Unexpected result in failure case: " + ev)
if "ssid=sae " not in ev:
raise Exception("Missing SSID: " + ssid)
finally:
dev[0].set("dpp_config_processing", "0", allow_fail=True)
dev[1].request("DPP_CONTROLLER_STOP")
def test_dpp_tcp_pkex_auto_connect_2(dev, apdev, params):
"""DPP/PKEXv2 over TCP and automatic connection"""
run_dpp_tcp_pkex_auto_connect_2(dev, apdev, params, False)
def test_dpp_tcp_pkex_auto_connect_2_status(dev, apdev, params):
"""DPP/PKEXv2 over TCP and automatic connection status"""
run_dpp_tcp_pkex_auto_connect_2(dev, apdev, params, True)
def test_dpp_tcp_pkex_auto_connect_2_status_fail(dev, apdev, params):
"""DPP/PKEXv2 over TCP and automatic connection status for failure"""
run_dpp_tcp_pkex_auto_connect_2(dev, apdev, params, True, start_ap=False)
def test_dpp_tcp_pkex_while_associated(dev, apdev, params):
"""DPP/PKEXv2 over TCP while associated"""
try:
run_dpp_tcp_pkex_while_associated(dev, apdev, params, False)
finally:
dev[1].request("DPP_CONTROLLER_STOP")
dev[0].set("dpp_config_processing", "0", allow_fail=True)
def test_dpp_tcp_pkex_while_associated_conn_status(dev, apdev, params):
"""DPP/PKEXv2 over TCP while associated (conn status)"""
try:
run_dpp_tcp_pkex_while_associated(dev, apdev, params, True)
finally:
dev[1].request("DPP_CONTROLLER_STOP")
dev[0].set("dpp_config_processing", "0", allow_fail=True)
def run_dpp_tcp_pkex_while_associated(dev, apdev, params, status):
check_sae_capab(dev[0])
cap_lo = params['prefix'] + ".lo.pcap"
params = {"ssid": "current",
"wpa": "2",
"wpa_key_mgmt": "SAE",
"ieee80211w": "2",
"rsn_pairwise": "CCMP",
"sae_password": "password"}
hapd = hostapd.add_ap(apdev[0], params)
params = {"ssid": "sae",
"wpa": "2",
"wpa_key_mgmt": "SAE",
"ieee80211w": "2",
"rsn_pairwise": "CCMP",
"sae_password": "sae-password"}
hapd2 = hostapd.add_ap(apdev[1], params)
dev[0].set("dpp_config_processing", "2")
dev[0].set("sae_groups", "")
dev[0].connect("current", psk="password", key_mgmt="SAE", ieee80211w="2",
scan_freq="2412")
run_dpp_tcp_pkex(dev[0], dev[1], cap_lo, sae=True, status=status)
if status:
ev = dev[1].wait_event(["DPP-CONN-STATUS-RESULT"], timeout=16)
if ev is None:
raise Exception("Connection status result not reported")
if "result=0" not in ev:
raise Exception("Unexpected result in success case: " + ev)
dev[0].wait_connected(timeout=30)
def test_dpp_controller_relay_pkex(dev, apdev, params):
"""DPP Controller/Relay with PKEX"""
try:
run_dpp_controller_relay_pkex(dev, apdev, params)
finally:
dev[0].set("dpp_config_processing", "0", allow_fail=True)
dev[1].request("DPP_CONTROLLER_STOP")
def run_dpp_controller_relay_pkex(dev, apdev, params):
check_dpp_capab(dev[0], min_ver=3)
check_dpp_capab(dev[1], min_ver=3)
prefix = "dpp_controller_relay_pkex"
cap_lo = os.path.join(params['logdir'], prefix + ".lo.pcap")
wt = WlantestCapture('lo', cap_lo)
# Controller
conf_id = dev[1].dpp_configurator_add()
dev[1].set("dpp_configurator_params",
"conf=sta-dpp configurator=%d" % conf_id)
id_c = dev[1].dpp_bootstrap_gen()
res = dev[1].request("DPP_BOOTSTRAP_INFO %d" % id_c)
pkhash = None
for line in res.splitlines():
name, value = line.split('=')
if name == "pkhash":
pkhash = value
break
if not pkhash:
raise Exception("Could not fetch public key hash from Controller")
if "OK" not in dev[1].request("DPP_CONTROLLER_START"):
raise Exception("Failed to start Controller")
# Relay
params = {"ssid": "unconfigured",
"channel": "6",
"dpp_controller": "ipaddr=127.0.0.1 pkhash=" + pkhash}
relay = hostapd.add_ap(apdev[1], params)
check_dpp_capab(relay)
# Enroll Relay to the network
id_h = relay.dpp_bootstrap_gen(chan="81/6", mac=True)
uri_r = relay.request("DPP_BOOTSTRAP_GET_URI %d" % id_h)
dev[1].dpp_auth_init(uri=uri_r, conf="ap-dpp", configurator=conf_id)
wait_auth_success(relay, dev[1], configurator=dev[1], enrollee=relay)
update_hapd_config(relay)
code = "secret"
id1 = dev[1].dpp_bootstrap_gen(type="pkex")
cmd = "own=%d" % id1
cmd += " code=%s" % code
res = dev[1].request("DPP_PKEX_ADD " + cmd)
if "FAIL" in res:
raise Exception("Failed to set PKEX data (Controller)")
dev[0].flush_scan_cache()
# Initiate PKEX from Enrollee
dev[0].set("dpp_config_processing", "2")
dev[0].dpp_pkex_init(identifier=None, code=code, role="enrollee")
wait_auth_success(dev[1], dev[0], configurator=dev[1], enrollee=dev[0],
allow_enrollee_failure=True,
allow_configurator_failure=True)
ev = dev[0].wait_event(["DPP-NETWORK-ID"], timeout=1)
if ev is None:
raise Exception("DPP network id not reported")
network = int(ev.split(' ')[1])
dev[0].wait_connected()
dev[0].dump_monitor()
time.sleep(0.5)
wt.close()