DGNum/hostapd
6
0
Fork 0
Code Issues Pull requests 1 Projects Releases Packages Wiki Activity Actions
hostapd/wpa_supplicant/wpa_supplicant_i.h

810 lines
23 KiB
C
Raw Normal View History

Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
/*
* wpa_supplicant - Internal definitions
EXT PW: Add framework for supporting external password storage This new mechanism can be used to make wpa_supplicant using external storage (e.g., key store in the operating system) for passwords, passphrases, and PSKs. This commit is only adding the framework part needed to support this, i.e., no actual configuration parameter can yet use this new mechanism. In addition, only a simple test backend is added to allow developer testing of the functionality. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-03 20:28:42 +02:00
* Copyright (c) 2003-2012, Jouni Malinen <j@w1.fi>
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
*
Remove the GPL notification from files contributed by Jouni Malinen Remove the GPL notification text from the files that were initially contributed by myself. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 15:46:35 +01:00
* This software may be distributed under the terms of the BSD license.
* See README for more details.
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
*/
#ifndef WPA_SUPPLICANT_I_H
#define WPA_SUPPLICANT_I_H
Add BSS table to track scan results without dropping information Collect information from scan results into a BSS table that will not expire information as quickly as scan results where every new scan, no matter for how limited set of channels/SSIDs, clears all old information. For now, this is only used for D-Bus BSS added/removed notifications, but this will likely be extended to be used internally instead of the scan results to better support partial scans.
2009-12-27 20:07:47 +01:00
#include "utils/list.h"
Add preliminary hostapd data structure initialization for AP mode wpa_supplicant can now initialize hostapd data structures when mode=2 is used to set up an AP. The hostapd configuration is not yet set based on wpa_supplicant network configuration block. In addition, the glue code for hostapd driver_ops needs number of functions that will be needed for AP functionality.
2009-03-26 19:37:05 +01:00
#include "common/defs.h"
P2P: Update D-Bus network object semantics during group formation Do not emit network objects during P2P group formation since such network objects can confuse certain apps. Instead, a persistent group object is created to allow apps to keep track of persistent groups. Persistent group objects only represent the info needed to recreate the group. Also fixes a minor bug in the handling of persistent group objects during WPS operations. Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-23 20:25:13 +02:00
#include "config_ssid.h"
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
Mark functions static if not used elsewhere and use proper prototypes
2009-01-03 19:38:42 +01:00
extern const char *wpa_supplicant_version;
extern const char *wpa_supplicant_license;
#ifndef CONFIG_NO_STDOUT_DEBUG
extern const char *wpa_supplicant_full_license1;
extern const char *wpa_supplicant_full_license2;
extern const char *wpa_supplicant_full_license3;
extern const char *wpa_supplicant_full_license4;
extern const char *wpa_supplicant_full_license5;
#endif /* CONFIG_NO_STDOUT_DEBUG */
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
struct wpa_sm;
struct wpa_supplicant;
Added initial step for IBSS RSN support This commit adds a new build option, CONFIG_IBSS_RSN=y, that can be used to enable RSN support for IBSS. This links in RSN Authenticator code from hostapd and adds code for managing per-peer information for IBSS. A new wpa_cli command or driver event can be used to request RSN authentication with an IBSS peer. New RSN Authenticator and Supplicant will be allocated for each peer. The basic state machine setup code is included in this commit, but the state machines are not properly started yet. In addition, some of the callback functions are not yet complete.
2009-01-15 00:21:55 +01:00
struct ibss_rsn;
Only expire scanned BSSes based on new scan results Get more information about scans when updating BSS table information. This allows the missing-from-scans expiration rule to work properly when only partial set of channels or SSIDs are being scanned.
2010-01-02 12:57:44 +01:00
struct scan_info;
Use BSS table entry instead of raw scan result for connection
2010-01-02 15:16:02 +01:00
struct wpa_bss;
Add option for overriding scan result handler for a single scan
2010-04-11 18:53:31 +02:00
struct wpa_scan_results;
Fix compiler warning from previous commit
2010-10-27 10:31:32 +02:00
struct hostapd_hw_modes;
Support HT capability overrides This allows HT capabilities overrides on kernels that support these features. MCS Rates can be disabled to force to slower speeds when using HT. Rates cannot be forced higher. HT can be disabled, forcing an 802.11a/b/g/n station to act like an 802.11a/b/g station. HT40 can be disabled. MAX A-MSDU can be disabled. A-MPDU Factor and A-MPDU Density can be modified. Please note that these are suggestions to the kernel. Only mac80211 drivers will work at all. The A-MPDU Factor can only be decreased and the A-MPDU Density can only be increased currently. Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-01-29 20:01:31 +01:00
struct wpa_driver_associate_params;
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
/*
* Forward declarations of private structures used within the ctrl_iface
* backends. Other parts of wpa_supplicant do not have access to data stored in
* these structures.
*/
struct ctrl_iface_priv;
struct ctrl_iface_global_priv;
dbus: Share common initialization code for both old and new interface This was mostly identical code that had been copied for the new D-Bus API implementation and as such, should really have been shared from the beginning. In addition, the copied code ended up generating interesting stack traces since the actual D-Bus connection was being shared even though the pointer to it was stored in two distinct data structures. The old D-Bus code ended up dispatching some D-Bus callbacks which ended up running the new D-Bus code. Since the private context pointers were mostly identical, everything seemed to more or less work, but this design was just making things more complex and potentially very easy to break.
2009-12-30 23:15:56 +01:00
struct wpas_dbus_priv;
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
/**
* struct wpa_interface - Parameters for wpa_supplicant_add_iface()
*/
struct wpa_interface {
/**
* confname - Configuration name (file or profile) name
*
* This can also be %NULL when a configuration file is not used. In
* that case, ctrl_interface must be set to allow the interface to be
* configured.
*/
const char *confname;
/**
* ctrl_interface - Control interface parameter
*
* If a configuration file is not used, this variable can be used to
* set the ctrl_interface parameter that would have otherwise been read
* from the configuration file. If both confname and ctrl_interface are
* set, ctrl_interface is used to override the value from configuration
* file.
*/
const char *ctrl_interface;
/**
* driver - Driver interface name, or %NULL to use the default driver
*/
const char *driver;
/**
* driver_param - Driver interface parameters
*
* If a configuration file is not used, this variable can be used to
* set the driver_param parameters that would have otherwise been read
* from the configuration file. If both confname and driver_param are
* set, driver_param is used to override the value from configuration
* file.
*/
const char *driver_param;
/**
* ifname - Interface name
*/
const char *ifname;
/**
* bridge_ifname - Optional bridge interface name
*
* If the driver interface (ifname) is included in a Linux bridge
* device, the bridge interface may need to be used for receiving EAPOL
* frames. This can be enabled by setting this variable to enable
* receiving of EAPOL frames from an additional interface.
*/
const char *bridge_ifname;
};
/**
* struct wpa_params - Parameters for wpa_supplicant_init()
*/
struct wpa_params {
/**
* daemonize - Run %wpa_supplicant in the background
*/
int daemonize;
/**
* wait_for_monitor - Wait for a monitor program before starting
*/
int wait_for_monitor;
/**
* pid_file - Path to a PID (process ID) file
*
* If this and daemonize are set, process ID of the background process
* will be written to the specified file.
*/
char *pid_file;
/**
* wpa_debug_level - Debugging verbosity level (e.g., MSG_INFO)
*/
int wpa_debug_level;
/**
* wpa_debug_show_keys - Whether keying material is included in debug
*
* This parameter can be used to allow keying material to be included
* in debug messages. This is a security risk and this option should
* not be enabled in normal configuration. If needed during
* development or while troubleshooting, this option can provide more
* details for figuring out what is happening.
*/
int wpa_debug_show_keys;
/**
* wpa_debug_timestamp - Whether to include timestamp in debug messages
*/
int wpa_debug_timestamp;
/**
* ctrl_interface - Global ctrl_iface path/parameter
*/
char *ctrl_interface;
/**
* dbus_ctrl_interface - Enable the DBus control interface
*/
int dbus_ctrl_interface;
/**
* wpa_debug_file_path - Path of debug file or %NULL to use stdout
*/
const char *wpa_debug_file_path;
Add support for wpa_supplicant syslog output Enable for build: CFLAGS += -DCONFIG_DEBUG_SYSLOG in .config Enable at runtime: -s on command line
2009-03-02 20:40:44 +01:00
/**
* wpa_debug_syslog - Enable log output through syslog
*/
int wpa_debug_syslog;
Allow driver and ctrl_interface parameters to be overridden New wpa_supplicant command line options -o<driver> and -O<ctrl> can now be used to override the parameters received in add interface command from dbus or global ctrl_interface. This can be used, e.g., to enable control interface when using NetworkManager (add -O/var/run/wpa_supplicant into the Exec parameter in /usr/share/dbus-1/system-services/fi.epitest.hostap.WPASupplicant.service). Similarly, this can be used to use another driver wrapper with NetworkManager (e.g., -onl80211 to replace WEXT with nl80211).
2009-11-04 19:16:15 +01:00
debug: Add option to log to Linux tracing Add the option (-T) to wpa_supplicant to log all debug messages into the kernel tracing, allowing to aggregate kernel debugging with wpa_supplicant debugging and recording all with trace-cmd. Since tracing has relatively low overhead and can be filtered afterwards, record all messages regardless of log level. However, it will honor the -K option and not record key material by default. Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-03-31 12:55:33 +02:00
/**
* wpa_debug_tracing - Enable log output through Linux tracing
*/
int wpa_debug_tracing;
Allow driver and ctrl_interface parameters to be overridden New wpa_supplicant command line options -o<driver> and -O<ctrl> can now be used to override the parameters received in add interface command from dbus or global ctrl_interface. This can be used, e.g., to enable control interface when using NetworkManager (add -O/var/run/wpa_supplicant into the Exec parameter in /usr/share/dbus-1/system-services/fi.epitest.hostap.WPASupplicant.service). Similarly, this can be used to use another driver wrapper with NetworkManager (e.g., -onl80211 to replace WEXT with nl80211).
2009-11-04 19:16:15 +01:00
/**
* override_driver - Optional driver parameter override
*
* This parameter can be used to override the driver parameter in
* dynamic interface addition to force a specific driver wrapper to be
* used instead.
*/
char *override_driver;
/**
* override_ctrl_interface - Optional ctrl_interface override
*
* This parameter can be used to override the ctrl_interface parameter
* in dynamic interface addition to force a control interface to be
* created.
*/
char *override_ctrl_interface;
random: Add support for maintaining internal entropy store over restarts This can be used to avoid rejection of first two 4-way handshakes every time hostapd (or wpa_supplicant in AP/IBSS mode) is restarted. A new command line parameter, -e, can now be used to specify an entropy file that will be used to maintain the needed state.
2011-05-31 19:07:11 +02:00
/**
* entropy_file - Optional entropy file
*
* This parameter can be used to configure wpa_supplicant to maintain
* its internal entropy store over restarts.
*/
char *entropy_file;
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
};
P2P: Add initial version of P2P Module
2010-07-18 23:30:25 +02:00
struct p2p_srv_bonjour {
struct dl_list list;
struct wpabuf *query;
struct wpabuf *resp;
};
struct p2p_srv_upnp {
struct dl_list list;
u8 version;
char *service;
};
P2P: Allow channels to be removed from P2P use A list of disallowed frequencies for P2P channel list can now be configured with P2P_SET disallow_freq. The frequencies (or frequency pairs) are comma separated. For example: wpa_cli p2p_set disallow_freq 2462,5000-6000 The allowed P2P channel list is constructed by removing explicitly disallowed channels from the channel list received from the driver. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-17 21:57:13 +01:00
struct wpa_freq_range {
unsigned int min;
unsigned int max;
};
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
/**
* struct wpa_global - Internal, global data for all %wpa_supplicant interfaces
*
* This structure is initialized by calling wpa_supplicant_init() when starting
* %wpa_supplicant.
*/
struct wpa_global {
struct wpa_supplicant *ifaces;
struct wpa_params params;
struct ctrl_iface_global_priv *ctrl_iface;
dbus: Share common initialization code for both old and new interface This was mostly identical code that had been copied for the new D-Bus API implementation and as such, should really have been shared from the beginning. In addition, the copied code ended up generating interesting stack traces since the actual D-Bus connection was being shared even though the pointer to it was stored in two distinct data structures. The old D-Bus code ended up dispatching some D-Bus callbacks which ended up running the new D-Bus code. Since the private context pointers were mostly identical, everything seemed to more or less work, but this design was just making things more complex and potentially very easy to break.
2009-12-30 23:15:56 +01:00
struct wpas_dbus_priv *dbus;
Added support for global driver data (shared by multiple interfaces) Driver wrappers can now register global_init() and global_deinit() driver_ops handlers to get a global data structure that can be shared for all interfaces. This allows driver wrappers to initialize some functionality (e.g., interface monitoring) before any interfaces have been initialized.
2008-12-22 21:24:31 +01:00
void **drv_priv;
size_t drv_count;
Add suspend/resume notifications wpa_supplicant can now be notified of suspend/resume events, e.g., from pm-action scripts. This allows wpa_supplicant to clear information that may become invalid during a suspend operation.
2010-02-27 17:46:02 +01:00
struct os_time suspend_time;
P2P: Add initial version of P2P Module
2010-07-18 23:30:25 +02:00
struct p2p_data *p2p;
P2P: Deinitialize global P2P context on P2P mgmt interface removal The P2P implementation assumes that the first wpa_s interface instance is used to manage P2P operations and the P2P module maintains a pointer to this interface in msg_ctx. This can result in issues (e.g., use of freed memory) when the management interface is removed. Fix this by deinitializing global P2P data if the interface that created it is removed. This will disable P2P until the next interface is added. Signed-hostap: Jouni Malinen <j@w1.fi> intended-for: hostap-1
2012-05-10 09:49:22 +02:00
struct wpa_supplicant *p2p_init_wpa_s;
P2P: Add initial version of P2P Module
2010-07-18 23:30:25 +02:00
struct wpa_supplicant *p2p_group_formation;
u8 p2p_dev_addr[ETH_ALEN];
struct dl_list p2p_srv_bonjour; /* struct p2p_srv_bonjour */
struct dl_list p2p_srv_upnp; /* struct p2p_srv_upnp */
int p2p_disabled;
P2P: Add support for cross connection If enabled, cross connection allows GO to forward IPv4 packets using masquerading NAT from the P2P clients in the group to an uplink WLAN connection. This is disabled by default and can be enabled with "wpa_cli p2p_set cross_connect 1" on the P2P device interface.
2010-07-10 19:19:34 +02:00
int cross_connection;
P2P: Allow channels to be removed from P2P use A list of disallowed frequencies for P2P channel list can now be configured with P2P_SET disallow_freq. The frequencies (or frequency pairs) are comma separated. For example: wpa_cli p2p_set disallow_freq 2462,5000-6000 The allowed P2P channel list is constructed by removing explicitly disallowed channels from the channel list received from the driver. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-17 21:57:13 +01:00
struct wpa_freq_range *p2p_disallow_freq;
unsigned int num_p2p_disallow_freq;
P2P: Add preference setting for concurrent use cases Add an additional parameter to prioritize either sta or p2p connection to resolve conflicts arising during single channel concurrency. Signed-hostap: Jithu Jance <jithu@broadcom.com>
2012-06-10 19:53:09 +02:00
enum wpa_conc_pref {
WPA_CONC_PREF_NOT_SET,
WPA_CONC_PREF_STA,
WPA_CONC_PREF_P2P
} conc_pref;
P2P: Move p2p_cb_on_scan_complete to global context Since we have a global P2P module, the flag to trigger scan completion events to it needs to be in similar context. The previous design maintained this separately for each virtual interface and if P2P module did not run its scan operation on the virtual interface that completed the scan, P2P module would not be allowed to restart operations properly. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-14 02:58:22 +02:00
unsigned int p2p_cb_on_scan_complete:1;
WFD: Add Wi-Fi Display support This commit adds control interface commands and internal storage of Wi-Fi Display related configuration. In addition, WFD IE is now added to various P2P frames, Probe Request/Response, and (Re)Association Request/Response frames. WFD subelements from peers are stored in the P2P peer table. Following control interface commands are now available: SET wifi_display <0/1> GET wifi_display WFD_SUBELEM_SET <subelem> [hexdump of length+body] WFD_SUBELEM_GET <subelem> Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-02 16:26:01 +01:00
#ifdef CONFIG_WIFI_DISPLAY
int wifi_display;
#define MAX_WFD_SUBELEMS 10
struct wpabuf *wfd_subelem[MAX_WFD_SUBELEMS];
#endif /* CONFIG_WIFI_DISPLAY */
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
};
Document offchannel Action frame TX functions Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-22 10:06:56 +01:00
/**
* offchannel_send_action_result - Result of offchannel send Action frame
*/
GAS: Use off-channel operations for requests This separates off-channel Action frame TX/RX from P2P into a generic implementation that can now be used both for P2P and GAS needs.
2011-09-29 18:22:08 +02:00
enum offchannel_send_action_result {
Document offchannel Action frame TX functions Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-22 10:06:56 +01:00
OFFCHANNEL_SEND_ACTION_SUCCESS /**< Frame was send and acknowledged */,
OFFCHANNEL_SEND_ACTION_NO_ACK /**< Frame was sent, but not acknowledged
GAS: Use off-channel operations for requests This separates off-channel Action frame TX/RX from P2P into a generic implementation that can now be used both for P2P and GAS needs.
2011-09-29 18:22:08 +02:00
*/,
Document offchannel Action frame TX functions Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-22 10:06:56 +01:00
OFFCHANNEL_SEND_ACTION_FAILED /**< Frame was not sent due to a failure
*/
GAS: Use off-channel operations for requests This separates off-channel Action frame TX/RX from P2P into a generic implementation that can now be used both for P2P and GAS needs.
2011-09-29 18:22:08 +02:00
};
WPS: Maintain more AP state during WPS PIN iteration Maintain state of WPS APs during iteration to find the correct AP for WPS PIN operation when no specific BSSID is specified. This information can be used for optimizing the order in which the APs are tried. This commit is only adding the collection of the information and more detailed debug information to make debug logs more helpful in figuring out how the AP selection order could be improved. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-27 12:48:11 +02:00
struct wps_ap_info {
u8 bssid[ETH_ALEN];
enum wps_ap_info_type {
WPS_AP_NOT_SEL_REG,
WPS_AP_SEL_REG,
WPS_AP_SEL_REG_OUR
} type;
unsigned int tries;
struct os_time last_attempt;
};
Add disallow_aps parameter to disallow BSSIDs/SSIDs External programs can use this new parameter to prevent wpa_supplicant from connecting to a list of BSSIDs and/or SSIDs. The disallowed BSSes will still be visible in scan results and it is possible to run ANQP operations with them, but BSS selection for connection will skip any BSS that matches an entry in the disallowed list. The new parameter can be set with the control interface SET command using following syntax: SET disallow_aps <disallow_list> disallow_list ::= <ssid_spec> | <bssid_spec> | <disallow_list> | “” SSID_SPEC ::= ssid <SSID_HEX> BSSID_SPEC ::= bssid <BSSID_HEX> For example: wpa_cli set disallow_list "ssid 74657374 bssid 001122334455 ssid 68656c6c6f" wpa_cli set disallow_list (the empty value removes all entries) Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-09-27 16:36:59 +02:00
struct wpa_ssid_value {
u8 ssid[32];
size_t ssid_len;
};
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
/**
* struct wpa_supplicant - Internal data for wpa_supplicant interface
*
* This structure contains the internal data for core wpa_supplicant code. This
* should be only used directly from the core code. However, a pointer to this
* data is used from other files as an arbitrary context pointer in calls to
* core functions.
*/
struct wpa_supplicant {
struct wpa_global *global;
P2P: Add initial version of P2P Module
2010-07-18 23:30:25 +02:00
struct wpa_supplicant *parent;
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
struct wpa_supplicant *next;
struct l2_packet_data *l2;
struct l2_packet_data *l2_br;
unsigned char own_addr[ETH_ALEN];
char ifname[100];
#ifdef CONFIG_CTRL_IFACE_DBUS
char *dbus_path;
#endif /* CONFIG_CTRL_IFACE_DBUS */
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
#ifdef CONFIG_CTRL_IFACE_DBUS_NEW
char *dbus_new_path;
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
char *dbus_groupobj_path;
DBus: Add ability to report probe requests Some applications require knowing about probe requests to identify devices. This can be the case in AP mode to see the devices before they connect, or even in P2P mode when operating as a P2P device to identify non-P2P peers (P2P peers are identified via PeerFound signals). As there are typically a lot of probe requests, require that an interested application subscribes to this signal so the bus isn't always flooded with these notifications. The notifications in DBus are then unicast only to that application. A small test script is also included. Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 20:13:38 +02:00
#ifdef CONFIG_AP
char *preq_notify_peer;
#endif /* CONFIG_AP */
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
#endif /* CONFIG_CTRL_IFACE_DBUS_NEW */
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
char bridge_ifname[16];
char *confname;
struct wpa_config *conf;
int countermeasures;
os_time_t last_michael_mic_error;
u8 bssid[ETH_ALEN];
u8 pending_bssid[ETH_ALEN]; /* If wpa_state == WPA_ASSOCIATING, this
Correct a spelling mistake The word "targer" in the comments for pending_bssid of wpa_supplicant data structure should be "target".
2011-11-13 17:35:15 +01:00
* field contains the target BSSID. */
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
int reassociate; /* reassociation requested */
int disconnected; /* all connections disabled; i.e., do no reassociate
* before this has been cleared */
struct wpa_ssid *current_ssid;
Maintain a pointer to the current BSS table entry
2010-01-02 15:59:19 +01:00
struct wpa_bss *current_bss;
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
int ap_ies_from_associnfo;
Add an option for driver wrappers to report operational frequency
2009-12-28 12:23:13 +01:00
unsigned int assoc_freq;
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
/* Selected configuration (based on Beacon/ProbeResp WPA IE) */
int pairwise_cipher;
int group_cipher;
int key_mgmt;
nl80211: Fix WPA_VERSIONS attribute for Connect command The previous code was trying to figure out which WPA version is used based on the extra IEs requested for Association Request. That did not work properly in cases where non-WPA networks are used with some extra IEs. Fix this by using more robust mechanism for passing the WPA versions from core wpa_supplicant to the driver_ops associate().
2011-09-02 19:40:23 +02:00
int wpa_proto;
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
int mgmt_group_cipher;
void *drv_priv; /* private data used by driver_ops */
Fix init2() driver_ops to get the correct global driver context Need to provide the private driver context, not the wpa_supplicant global context, in init2() call.
2009-11-28 17:11:16 +01:00
void *global_drv_priv;
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
Add BSSID filter for testing purposes wpa_supplicant can now be configured to filter out scan results based on a BSSID filter. Space-separated set of allowed BSSIDs can be set with wpa_cli set bssid_filter command. Filtering mechanism can be disabled by setting this variable to an empty list. When set, only the BSSes that have a matching entry in this list will be accepted from scan results. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 15:30:13 +01:00
u8 *bssid_filter;
size_t bssid_filter_count;
Add disallow_aps parameter to disallow BSSIDs/SSIDs External programs can use this new parameter to prevent wpa_supplicant from connecting to a list of BSSIDs and/or SSIDs. The disallowed BSSes will still be visible in scan results and it is possible to run ANQP operations with them, but BSS selection for connection will skip any BSS that matches an entry in the disallowed list. The new parameter can be set with the control interface SET command using following syntax: SET disallow_aps <disallow_list> disallow_list ::= <ssid_spec> | <bssid_spec> | <disallow_list> | “” SSID_SPEC ::= ssid <SSID_HEX> BSSID_SPEC ::= bssid <BSSID_HEX> For example: wpa_cli set disallow_list "ssid 74657374 bssid 001122334455 ssid 68656c6c6f" wpa_cli set disallow_list (the empty value removes all entries) Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-09-27 16:36:59 +02:00
u8 *disallow_aps_bssid;
size_t disallow_aps_bssid_count;
struct wpa_ssid_value *disallow_aps_ssid;
size_t disallow_aps_ssid_count;
Interleave wildcard and specific SSID scans when max_ssids=1 For drivers limited to scan a single SSID at a time, this prevents waiting too long for a wildcard scan in case there are several scan_ssid networks in the configuration. Signed-hostap: Eyal Shapira <eyal@wizery.com>
2012-01-29 16:39:08 +01:00
/* previous scan was wildcard when interleaving between
* wildcard scans and specific SSID scan when max_ssids=1 */
int prev_scan_wildcard;
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
struct wpa_ssid *prev_scan_ssid; /* previously scanned SSID;
* NULL = not yet initialized (start
Rename "broadcast SSID" to "wildcard SSID" "Wildcard SSID" is the term used in IEEE Std 802.11-2007, so it is a better name for the zero-length SSID used in Probe Request.
2009-02-14 21:21:17 +01:00
* with wildcard SSID)
* WILDCARD_SSID_SCAN = wildcard
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
* SSID was used in the previous scan
*/
Rename "broadcast SSID" to "wildcard SSID" "Wildcard SSID" is the term used in IEEE Std 802.11-2007, so it is a better name for the zero-length SSID used in Probe Request.
2009-02-14 21:21:17 +01:00
#define WILDCARD_SSID_SCAN ((struct wpa_ssid *) 1)
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
Add scheduled scan driver operations In new Linux kernel versions (>=3.0), nl80211 adds scheduled scan capability. In order to use this feature to its full extent, we need to support it in the wpa_supplicant core, so that it can also be used by other drivers. This commit adds initial scheduled scan support operations and events. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-27 21:21:29 +02:00
struct wpa_ssid *prev_sched_ssid; /* last SSID used in sched scan */
int sched_scan_timeout;
int sched_scan_interval;
int first_sched_scan;
int sched_scan_timed_out;
Add option for overriding scan result handler for a single scan
2010-04-11 18:53:31 +02:00
void (*scan_res_handler)(struct wpa_supplicant *wpa_s,
struct wpa_scan_results *scan_res);
Add BSS table to track scan results without dropping information Collect information from scan results into a BSS table that will not expire information as quickly as scan results where every new scan, no matter for how limited set of channels/SSIDs, clears all old information. For now, this is only used for D-Bus BSS added/removed notifications, but this will likely be extended to be used internally instead of the scan results to better support partial scans.
2009-12-27 20:07:47 +01:00
struct dl_list bss; /* struct wpa_bss::list */
Add BSS list sorted by id and add some helper functions This allows the BSS list to be iterated in order of increasing id to avoid problems with new scans reordering entries. The order on the wpa_s->bss list changes with most recently updated entries being moved to the tail of the list while wpa_s->bss_id list maintains its order with new entries being added to the tail and old entries being removed when they expire.
2009-12-27 23:30:38 +01:00
struct dl_list bss_id; /* struct wpa_bss::list_id */
Add BSS table to track scan results without dropping information Collect information from scan results into a BSS table that will not expire information as quickly as scan results where every new scan, no matter for how limited set of channels/SSIDs, clears all old information. For now, this is only used for D-Bus BSS added/removed notifications, but this will likely be extended to be used internally instead of the scan results to better support partial scans.
2009-12-27 20:07:47 +01:00
size_t num_bss;
unsigned int bss_update_idx;
unsigned int bss_next_id;
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
Maintain list of BSS entries in last scan result order This allows last results to be used even after they have been freed since the information is copied to the BSS entries anyway and this new array provides the order in which scan results were processed. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-02 18:53:15 +02:00
/*
* Pointers to BSS entries in the order they were in the last scan
* results.
*/
struct wpa_bss **last_scan_res;
unsigned int last_scan_res_used;
unsigned int last_scan_res_size;
int last_scan_full;
struct os_time last_scan;
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
struct wpa_driver_ops *driver;
int interface_removed; /* whether the network interface has been
* removed */
struct wpa_sm *wpa;
struct eapol_sm *eapol;
struct ctrl_iface_priv *ctrl_iface;
Get rid of unnecessary typedefs for enums.
2009-12-26 09:35:08 +01:00
enum wpa_states wpa_state;
dbus: add 'scanning' property When the supplicant is connected and performs a scan, it doesn't enter WPA_SCANNING state for various reasons. However, external programs still need to know that the supplicant is scanning since they may not wish to perform certain operations during a scan (as those operations will likely fail or yield incorrect results). Add a 'scanning' property and signal to the supplicant dbus interface to allow clients to synchronize better with the supplicant when it scans. Signed-off-by: Dan Williams <dcbw@redhat.com>
2009-05-27 20:06:40 +02:00
int scanning;
Add scheduled scan driver operations In new Linux kernel versions (>=3.0), nl80211 adds scheduled scan capability. In order to use this feature to its full extent, we need to support it in the wpa_supplicant core, so that it can also be used by other drivers. This commit adds initial scheduled scan support operations and events. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-27 21:21:29 +02:00
int sched_scanning;
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
int new_connection;
int reassociated_connection;
int eapol_received; /* number of EAPOL packets received after the
* previous association event */
struct scard_data *scard;
Allow PC/SC reader to be selected and initialized at start New global configuration parameters pcsc_reader and pcsc_pin can now be used to initialize PC/SC reader context at start of wpa_supplicant. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-26 12:07:05 +01:00
#ifdef PCSC_FUNCS
char imsi[20];
int mnc_len;
#endif /* PCSC_FUNCS */
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
unsigned char last_eapol_src[ETH_ALEN];
int keys_cleared;
struct wpa_blacklist *blacklist;
Maintain maximum blacklist count over list clear operations wpas_connection_failed() uses the blacklist count to figure out a suitable time to wait for the next scan. This mechanism did not work properly in cases where the temporary blacklist gets cleared due to no other BSSes being available. Address this by maintaining an additional count of blacklisting values over wpa_blacklist_clear() calls. In addition, add one more step in the count to timeout mapping to go to 10 second interval if more than four failures are seen. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-25 15:20:44 +01:00
/**
* extra_blacklist_count - Sum of blacklist counts after last connection
*
* This variable is used to maintain a count of temporary blacklisting
* failures (maximum number for any BSS) over blacklist clear
* operations. This is needed for figuring out whether there has been
* failures prior to the last blacklist clear operation which happens
* whenever no other not-blacklisted BSS candidates are available. This
* gets cleared whenever a connection has been established successfully.
*/
int extra_blacklist_count;
Document wpa_s->scan_req Use an enum with documented values to make it easier to understand how wpa_s->scan_req is used. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-25 14:55:32 +01:00
/**
* scan_req - Type of the scan request
*/
enum scan_req_type {
/**
* NORMAL_SCAN_REQ - Normal scan request
*
* This is used for scans initiated by wpa_supplicant to find an
* AP for a connection.
*/
NORMAL_SCAN_REQ,
/**
* INITIAL_SCAN_REQ - Initial scan request
*
* This is used for the first scan on an interface to force at
* least one scan to be run even if the configuration does not
* include any enabled networks.
*/
INITIAL_SCAN_REQ,
/**
* MANUAL_SCAN_REQ - Manual scan request
*
* This is used for scans where the user request a scan or
* a specific wpa_supplicant operation (e.g., WPS) requires scan
* to be run.
*/
MANUAL_SCAN_REQ
} scan_req;
Allow WPS APs for PIN enrollment even without Selected Registrar Some WPS APs do not set Selected Registrar attribute to 1 properly when using an external Registrar. Allow such an AP to be selected for PIN registration after couple of scan runs that do not find APs marked with Selected Registrar = 1. This allows wpa_supplicant to iterate through all APs that advertise WPS support without delaying connection with implementations that set Selected Registrar = 1 properly.
2009-01-23 12:10:58 +01:00
int scan_runs; /* number of scan runs since WPS was started */
SME: Optimize recovery from common load balancing mechanisms When authentication or association fails when trying to connect to a BSS in an ESS that has multiple BSSes based on previous scans, limit the first recovery scan to only the known channels that has been seen previously. This speeds up recovery in some of the most commonly used load balancing mechanisms in enterprise WLAN networks.
2010-11-25 21:51:56 +01:00
int *next_scan_freqs;
Make scan interval configurable It is now possible to configure the the time in seconds that wpa_supplicant waits before requesting a new scan after failing to find a suitable network in scan results. Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-04-11 22:14:38 +02:00
int scan_interval; /* time in sec between scans to find suitable AP */
Use normal scan before sched_scan if that can speed up connection When normal scan can speed up operations, use that for the first three scan runs before starting the sched_scan to allow user space sleep more. We do this only if the normal scan has functionality that is suitable for this or if the sched_scan does not have better support for multiple SSIDs. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-28 17:36:36 +01:00
int normal_scans; /* normal scans run before sched_scan */
P2P: Avoid multi-channel scans when they are not needed If the driver does not support multi-channel concurrency and a virtual interface that shares the same radio with the current interface is operating there may not be need to scan other channels apart from the current operating channel on the other virtual interface. Filter out other channels in case we are trying to find a connection for a station interface when we are not configured to prefer station connection and a concurrent operation is already in process. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-25 11:47:43 +01:00
int scan_for_connection; /* whether the scan request was triggered for
* finding a connection */
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
Add SME support (separate authentication and association) This can be used, e.g., with mac80211-based Linux drivers with nl80211. This allows over-the-air FT protocol to be used (IEEE 802.11r). Since the nl80211 interface needed for this is very recent (added today into wireless-testing.git), driver_nl80211.c has backwards compatibility code that uses WEXT for association if the kernel does not support the new commands. This compatibility code can be disabled by defining NO_WEXT_COMPAT. That code will also be removed at some point to clean up driver_nl80211.c.
2009-03-20 21:26:41 +01:00
unsigned int drv_flags;
Validate WEP key lengths based on driver capabilities The nl80211 driver interface does not allow 128-bit WEP to be used without a vendor specific cipher suite and no such suite is defined for this purpose. Do not accept WEP key length 16 for nl80211 driver interface forn ow. wext-interface can still try to use these for backwards compatibility. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-10 13:34:46 +02:00
unsigned int drv_enc;
Maintain internal copy of Probe Response offload capabilities Signed-hostap: Arik Nemtsov <arik@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-12-10 16:17:43 +01:00
/*
* A bitmap of supported protocols for probe response offload. See
* struct wpa_driver_capa in driver.h
*/
unsigned int probe_resp_offloads;
New driver capability info: max number of scan SSIDs The driver wrappers can now inform wpa_supplicant how many SSIDs can be used in a single scan request (i.e., send multiple Probe Requests per channel). This value is not yet used, but it can eventually be used to allow a new scan command to specify multiple SSIDs to speed up scan_ssid=1 operations. In addition, a warning could be printed if scan_ssid=1 is used with a driver that does not support it (max_scan_ssids=0).
2009-02-12 20:49:57 +01:00
int max_scan_ssids;
Add scheduled scan driver operations In new Linux kernel versions (>=3.0), nl80211 adds scheduled scan capability. In order to use this feature to its full extent, we need to support it in the wpa_supplicant core, so that it can also be used by other drivers. This commit adds initial scheduled scan support operations and events. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-27 21:21:29 +02:00
int max_sched_scan_ssids;
int sched_scan_supported;
Add filter support to scheduled scans Pass SSIDs to be matched in scheduled scan results. Only the SSIDs that are included in the match lists will be reported by the driver, so the filtering can be offloaded to the hardware and the power consumption can be reduced. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-27 21:21:35 +02:00
unsigned int max_match_sets;
Allow driver wrappers to indicate maximum remain-on-channel duration
2010-04-11 18:42:37 +02:00
unsigned int max_remain_on_chan;
P2P: Allow driver wrapper to indicate how many stations are supported This can be used to limit the number of clients allowed to connect to the group on the GO.
2010-07-30 00:32:33 +02:00
unsigned int max_stations;
Added an optional mitigation mechanism for certain attacks against TKIP by delaying Michael MIC error reports by a random amount of time between 0 and 60 seconds if multiple Michael MIC failures are detected with the same PTK (i.e., the Authenticator does not rekey PTK on first failure report). This is disabled by default and can be enabled with a build option CONFIG_DELAYED_MIC_ERROR_REPORT=y in .config. This may help in making a chopchop attack take much longer time by forcing the attacker to wait 60 seconds before knowing whether a modified frame resulted in a MIC failure.
2008-11-08 03:43:12 +01:00
int pending_mic_error_report;
int pending_mic_error_pairwise;
int mic_errors_seen; /* Michael MIC errors with the current PTK */
WPS: Moved wps_context initialization into wps_supplicant.c The wps_context data is now managed at wpa_supplicant, not EAP-WSC. This makes wpa_supplicant design for WPS match with hostapd one and also makes it easier configure whatever parameters and callbacks are needed for WPS.
2008-11-28 19:32:13 +01:00
struct wps_context *wps;
Allow WPS APs for PIN enrollment even without Selected Registrar Some WPS APs do not set Selected Registrar attribute to 1 properly when using an external Registrar. Allow such an AP to be selected for PIN registration after couple of scan runs that do not find APs marked with Selected Registrar = 1. This allows wpa_supplicant to iterate through all APs that advertise WPS support without delaying connection with implementations that set Selected Registrar = 1 properly.
2009-01-23 12:10:58 +01:00
int wps_success; /* WPS success event received */
WPS: Add initial part of External Registrar functionality This is the first step in adding support for using wpa_supplicant as a WPS External Registrar to manage APs over UPnP. Only the device discovery part is implemented in this commit.
2009-11-07 11:41:01 +01:00
struct wps_er *wps_er;
Allow WPS APs for PIN enrollment even without Selected Registrar Some WPS APs do not set Selected Registrar attribute to 1 properly when using an external Registrar. Allow such an AP to be selected for PIN registration after couple of scan runs that do not find APs marked with Selected Registrar = 1. This allows wpa_supplicant to iterate through all APs that advertise WPS support without delaying connection with implementations that set Selected Registrar = 1 properly.
2009-01-23 12:10:58 +01:00
int blacklist_cleared;
Added initial step for IBSS RSN support This commit adds a new build option, CONFIG_IBSS_RSN=y, that can be used to enable RSN support for IBSS. This links in RSN Authenticator code from hostapd and adds code for managing per-peer information for IBSS. A new wpa_cli command or driver event can be used to request RSN authentication with an IBSS peer. New RSN Authenticator and Supplicant will be allocated for each peer. The basic state machine setup code is included in this commit, but the state machines are not properly started yet. In addition, some of the callback functions are not yet complete.
2009-01-15 00:21:55 +01:00
Delay processing of EAPOL frames when not associated If an EAPOL frame is received while wpa_supplicant thinks the driver is not associated, queue the frame for processing at the moment when the association event is received. This is a workaround to a race condition in receiving data frames and management events from the kernel. The pending EAPOL frame will not be processed unless an association event is received within 100 msec for the same BSSID.
2009-09-04 17:04:41 +02:00
struct wpabuf *pending_eapol_rx;
struct os_time pending_eapol_rx_time;
u8 pending_eapol_rx_src[ETH_ALEN];
Extend EAPOL frames processing workaround for roaming cases Commit 1ff733383f3d5c73233ef452a738765667021609 added a mechanism to work around issues due to association events and EAPOL RX events being getting reordered. However, this applied only for the case where wpa_supplicant is not in associated state. The same issue can happen in roaming case with drivers that perform BSS selection internally (or in firmware). Handle that case similarly by delaying received EAPOL frame processing if the source address of the EAPOL frame does not match the current BSSID. Since wired IEEE 802.1X do not have BSSID, make this additional workaround conditional on BSSID match having been observed during the previous association. This fixes issues where the initial EAPOL frame after reassociation was either dropped (e.g., due to replay counter not increasing) or replied to with incorrect destination address (the BSSID of the old AP). This can result in significantly more robust roaming behavior with drivers that do not use wpa_supplicant for BSS selection. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-21 20:35:35 +01:00
unsigned int last_eapol_matches_bssid:1;
Delay processing of EAPOL frames when not associated If an EAPOL frame is received while wpa_supplicant thinks the driver is not associated, queue the frame for processing at the moment when the association event is received. This is a workaround to a race condition in receiving data frames and management events from the kernel. The pending EAPOL frame will not be processed unless an association event is received within 100 msec for the same BSSID.
2009-09-04 17:04:41 +02:00
Added initial step for IBSS RSN support This commit adds a new build option, CONFIG_IBSS_RSN=y, that can be used to enable RSN support for IBSS. This links in RSN Authenticator code from hostapd and adds code for managing per-peer information for IBSS. A new wpa_cli command or driver event can be used to request RSN authentication with an IBSS peer. New RSN Authenticator and Supplicant will be allocated for each peer. The basic state machine setup code is included in this commit, but the state machines are not properly started yet. In addition, some of the callback functions are not yet complete.
2009-01-15 00:21:55 +01:00
struct ibss_rsn *ibss_rsn;
Add SME support (separate authentication and association) This can be used, e.g., with mac80211-based Linux drivers with nl80211. This allows over-the-air FT protocol to be used (IEEE 802.11r). Since the nl80211 interface needed for this is very recent (added today into wireless-testing.git), driver_nl80211.c has backwards compatibility code that uses WEXT for association if the kernel does not support the new commands. This compatibility code can be disabled by defining NO_WEXT_COMPAT. That code will also be removed at some point to clean up driver_nl80211.c.
2009-03-20 21:26:41 +01:00
P2P: Add mechanism for configuring UAPSD parameters for group This is needed to be able to change parameters for dynamically created interfaces between the creation of the interface and association/start AP commands. Following ctrl_interface commands can now be used: P2P_SET client_apsd disable - disable configuration (i.e., use driver default) in client mode P2P_SET client_apsd <BE>,<BK>,<VI>,<VO>;<max SP Length> - enable UASPD with specific trigger configuration (0/1) per AC (max SP Length is currently ignored) P2P_SET go_apsd disable - disable configuration (i.e., use driver default) in AP mode P2P_SET go_apsd <0/1> - disable/enable APSD in AP mode
2010-07-28 19:18:52 +02:00
int set_sta_uapsd;
int sta_uapsd;
int set_ap_uapsd;
int ap_uapsd;
Add SME support (separate authentication and association) This can be used, e.g., with mac80211-based Linux drivers with nl80211. This allows over-the-air FT protocol to be used (IEEE 802.11r). Since the nl80211 interface needed for this is very recent (added today into wireless-testing.git), driver_nl80211.c has backwards compatibility code that uses WEXT for association if the kernel does not support the new commands. This compatibility code can be disabled by defining NO_WEXT_COMPAT. That code will also be removed at some point to clean up driver_nl80211.c.
2009-03-20 21:26:41 +01:00
#ifdef CONFIG_SME
struct {
u8 ssid[32];
size_t ssid_len;
int freq;
P2P: Add initial version of P2P Module
2010-07-18 23:30:25 +02:00
u8 assoc_req_ie[200];
Add SME support (separate authentication and association) This can be used, e.g., with mac80211-based Linux drivers with nl80211. This allows over-the-air FT protocol to be used (IEEE 802.11r). Since the nl80211 interface needed for this is very recent (added today into wireless-testing.git), driver_nl80211.c has backwards compatibility code that uses WEXT for association if the kernel does not support the new commands. This compatibility code can be disabled by defining NO_WEXT_COMPAT. That code will also be removed at some point to clean up driver_nl80211.c.
2009-03-20 21:26:41 +01:00
size_t assoc_req_ie_len;
int mfp;
int ft_used;
u8 mobility_domain[2];
u8 *ft_ies;
size_t ft_ies_len;
nl80211/SME: Use reassociation when roaming within the ESS
2009-11-17 18:25:05 +01:00
u8 prev_bssid[ETH_ALEN];
int prev_bssid_set;
FT: Process reassoc resp FT IEs when using wpa_supplicant SME
2010-03-13 20:13:18 +01:00
int auth_alg;
nl80211: Fix WPA_VERSIONS attribute for Connect command The previous code was trying to figure out which WPA version is used based on the extra IEs requested for Association Request. That did not work properly in cases where non-WPA networks are used with some extra IEs. Fix this by using more robust mechanism for passing the WPA versions from core wpa_supplicant to the driver_ops associate().
2011-09-02 19:40:23 +02:00
int proto;
Use SA Query procedure to recovery from AP/STA state mismatch If a station received unprotected Deauthentication or Disassociation frame with reason code 6 or 7 from the current AP, there may be a mismatch in association state between the AP and STA. Verify whether this is the case by using SA Query procedure. If not response is received from the AP, deauthenticate. This implementation is only for user space SME with driver_nl80211.c.
2010-12-19 10:58:00 +01:00
int sa_query_count; /* number of pending SA Query requests;
* 0 = no SA Query in progress */
int sa_query_timed_out;
u8 *sa_query_trans_id; /* buffer of WLAN_SA_QUERY_TR_ID_LEN *
* sa_query_count octets of pending
* SA Query transaction identifiers */
struct os_time sa_query_start;
Add handling of OBSS scan requests and 20/40 BSS coex reports Add support for HT STA to report 40 MHz intolerance to the associated AP. A HT station generates a report (20/40 BSS coexistence) of channel list if it finds a non-HT capable AP or a HT AP which prohibits 40 MHz transmission (i.e., 40 MHz intolerant bit is set in HT capabilities IE) from the scan results. Parse the OBSS scan parameter from Beacon or Probe Response frames and schedule periodic scan to generate 20/40 coexistence channel report if requested to do so. This patch decodes Scan Interval alone from the OBSS Scan Parameters element and triggers scan on timeout. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-03 11:13:43 +02:00
u8 sched_obss_scan;
u16 obss_scan_int;
WNM: Add advertisement of BSS max idle period If WNM is enabled for the build (CONFIG_WNM=y), add BSS max idle period information to the (Re)Association Response frame from the AP and parse this information on the station. For SME-in-wpa_supplicant case, add a timer to handle periodic transmission of the keep-alive frame. The actual request for the driver to transmit a frame is not yet implemented. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-28 02:35:00 +02:00
u16 bss_max_idle_period;
SAE: Add Finite Cyclic Group negotiation and Send-Confirm This replaces the previously used bogus test data in SAE messages with the first real field. The actual SAE authentication mechanism is still missing and the Scaler, Element, and Confirm fields are not included. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-10-06 18:30:54 +02:00
enum {
SME_SAE_INIT,
SME_SAE_COMMIT,
SME_SAE_CONFIRM
} sae_state;
u16 sae_send_confirm;
Add SME support (separate authentication and association) This can be used, e.g., with mac80211-based Linux drivers with nl80211. This allows over-the-air FT protocol to be used (IEEE 802.11r). Since the nl80211 interface needed for this is very recent (added today into wireless-testing.git), driver_nl80211.c has backwards compatibility code that uses WEXT for association if the kernel does not support the new commands. This compatibility code can be disabled by defining NO_WEXT_COMPAT. That code will also be removed at some point to clean up driver_nl80211.c.
2009-03-20 21:26:41 +01:00
} sme;
#endif /* CONFIG_SME */
Add preliminary hostapd data structure initialization for AP mode wpa_supplicant can now initialize hostapd data structures when mode=2 is used to set up an AP. The hostapd configuration is not yet set based on wpa_supplicant network configuration block. In addition, the glue code for hostapd driver_ops needs number of functions that will be needed for AP functionality.
2009-03-26 19:37:05 +01:00
#ifdef CONFIG_AP
struct hostapd_iface *ap_iface;
Add registerable callback for wpa_supplicant AP mode completion
2010-04-11 18:59:33 +02:00
void (*ap_configured_cb)(void *ctx, void *data);
void *ap_configured_cb_ctx;
void *ap_configured_cb_data;
Add preliminary hostapd data structure initialization for AP mode wpa_supplicant can now initialize hostapd data structures when mode=2 is used to set up an AP. The hostapd configuration is not yet set based on wpa_supplicant network configuration block. In addition, the glue code for hostapd driver_ops needs number of functions that will be needed for AP functionality.
2009-03-26 19:37:05 +01:00
#endif /* CONFIG_AP */
Add preliminary background scan and roaming module design This allows background scanning and roaming decisions to be contained in a single place based on a defined set of notification events which will hopefully make it easier to experiment with roaming improvements. In addition, this allows multiple intra-ESS roaming policies to be used (each network configuration block can configure its own bgscan module). The beacon loss and signal strength notifications are implemented for the bgscan API, but the actual events are not yet available from the driver. The included sample bgscan module ("simple") is an example of what can be done with the new bgscan mechanism. It requests periodic background scans when the device remains associated with an ESS and has couple of notes on what a more advanced bgscan module could do to optimize background scanning and roaming. The periodic scans will cause the scan result handler to pick a better AP if one becomes available. This bgscan module can be taken into use by adding bgscan="simple" (or bgscan="simple:<bgscan interval in seconds>") into the network configuration block.
2009-09-14 23:08:24 +02:00
P2P: Add initial version of P2P Module
2010-07-18 23:30:25 +02:00
unsigned int off_channel_freq;
struct wpabuf *pending_action_tx;
u8 pending_action_src[ETH_ALEN];
u8 pending_action_dst[ETH_ALEN];
u8 pending_action_bssid[ETH_ALEN];
unsigned int pending_action_freq;
Add no_cck parameter for send_action() driver_ops This can be used to apply the no-CCK rule conditionally depending on which frame is being sent. The no-CCK rule applies only for P2P management frames while SA Query and FT use cases do not have similar restrictions. Signed-hostap: Jouni Malinen <j@w1.fi>
2011-10-29 20:49:46 +02:00
int pending_action_no_cck;
P2P: Add initial version of P2P Module
2010-07-18 23:30:25 +02:00
int pending_action_without_roc;
GAS: Use off-channel operations for requests This separates off-channel Action frame TX/RX from P2P into a generic implementation that can now be used both for P2P and GAS needs.
2011-09-29 18:22:08 +02:00
void (*pending_action_tx_status_cb)(struct wpa_supplicant *wpa_s,
unsigned int freq, const u8 *dst,
const u8 *src, const u8 *bssid,
const u8 *data, size_t data_len,
enum offchannel_send_action_result
result);
unsigned int roc_waiting_drv_freq;
int action_tx_wait_time;
#ifdef CONFIG_P2P
struct p2p_go_neg_results *go_params;
int create_p2p_iface;
u8 pending_interface_addr[ETH_ALEN];
char pending_interface_name[100];
int pending_interface_type;
int p2p_group_idx;
P2P: Add initial version of P2P Module
2010-07-18 23:30:25 +02:00
unsigned int pending_listen_freq;
unsigned int pending_listen_duration;
enum {
NOT_P2P_GROUP_INTERFACE,
P2P_GROUP_INTERFACE_PENDING,
P2P_GROUP_INTERFACE_GO,
P2P_GROUP_INTERFACE_CLIENT
} p2p_group_interface;
struct p2p_group *p2p_group;
P2P: Fix p2p_long_listen There are two issues with p2p_long_listen: 1) max_remain_on_channel is assumed to be 5 seconds, 2) if max_remain_on_channel is not a full multiple of seconds, accounting breaks. Fix these by converting p2p_long_listen to ms and tracking it according to max_remain_on_channel. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-02-01 17:09:38 +01:00
int p2p_long_listen; /* remaining time in long Listen state in ms */
P2P: Add initial version of P2P Module
2010-07-18 23:30:25 +02:00
char p2p_pin[10];
P2P: Set Device Password ID in WPS M1/M2 per new rules If the P2P client (WPS Enrollee) uses a PIN from the GO (Registrar), Device Password ID in M1 & M2 is set to Registrar-specified.
2010-06-27 07:49:41 +02:00
int p2p_wps_method;
P2P: Add command for pre-authorizing an invitation to an active group This is mainly designed for testing and allows p2p_connect join auth to be used to accept a specific invitation to an active group that may be received in the future.
2010-06-27 09:11:42 +02:00
u8 p2p_auth_invite[ETH_ALEN];
P2P: Add initial version of P2P Module
2010-07-18 23:30:25 +02:00
int p2p_sd_over_ctrl_iface;
int p2p_in_provisioning;
int pending_invite_ssid_id;
int show_group_started;
u8 go_dev_addr[ETH_ALEN];
int pending_pd_before_join;
u8 pending_join_iface_addr[ETH_ALEN];
u8 pending_join_dev_addr[ETH_ALEN];
int pending_join_wps_method;
P2P: Allow multiple scan runs to find GO for p2p_connect join If the GO is not found, we cannot send Provisioning Discovery Request frame and cannot really connect anyway. Since the Provisioning Discovery is a mandatory part, it is better to continue join-scan until the GO is found instead of moving to the next step where normal connection scan is used (PD would not be used from there). Use a limit of 10 scan attempts for p2p_connect join to avoid getting in infinite loop trying to join. If the GO is not found with those scans, indicate failure (P2P-GROUP-FORMATION-FAILURE) and stop the join attempt.
2010-11-15 15:15:38 +01:00
int p2p_join_scan_count;
P2P: Improve p2p_prov_disc-auto robustness Perform addition additional scan runs on the operating channel of the GO (if known from previous scan results) and fall back to initiate the PD for GO Negotiation if these additional scans do not detect the peer as GO. Signed-hostap: Sunil Dutt Undekari <duttus@codeaurora.org>
2012-06-06 14:46:05 +02:00
int auto_pd_scan_retry;
P2P: Add test mode for SD to force fragmented response
2010-06-29 05:44:01 +02:00
int force_long_sd;
P2P: Add p2p_prov_disc auto mechanism wpa_supplicant can now be requested to automatically figure out whether the indicated peer is operating as a GO and if so, use join-a-group style PD instead of pre-GO Negotiation PD. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-26 16:13:03 +02:00
u16 pending_pd_config_methods;
enum {
NORMAL_PD, AUTO_PD_GO_NEG, AUTO_PD_JOIN
} pending_pd_use;
P2P: Add support for cross connection If enabled, cross connection allows GO to forward IPv4 packets using masquerading NAT from the P2P clients in the group to an uplink WLAN connection. This is disabled by default and can be enabled with "wpa_cli p2p_set cross_connect 1" on the P2P device interface.
2010-07-10 19:19:34 +02:00
/*
* Whether cross connection is disallowed by the AP to which this
* interface is associated (only valid if there is an association).
*/
int cross_connect_disallowed;
/*
* Whether this P2P group is configured to use cross connection (only
* valid if this is P2P GO interface). The actual cross connect packet
* forwarding may not be configured depending on the uplink status.
*/
int cross_connect_enabled;
/* Whether cross connection forwarding is in use at the moment. */
int cross_connect_in_use;
/*
* Uplink interface name for cross connection
*/
char cross_connect_uplink[100];
P2P: Add mechanism for timing out idle groups A new configuration parameter, p2p_group_idle, can now be used to set idle timeout value for P2P groups in seconds (0 = no timeout). If set, this values is used to remove P2P group (both GO and P2P client) interfaces after the group has been idle (no clients/GO seen) for the configuration duration. The P2P-GROUP-REMOVED event is now indicating the reason for group removal when known. For example: P2P-GROUP-REMOVED wlan0 GO reason=REQUESTED P2P-GROUP-REMOVED wlan1 client reason=IDLE
2010-10-25 17:24:15 +02:00
P2P: Allow scan operations during p2p_find Previously, all station mode scan operations were either skipped or delayed while any P2P operation was in progress. To make concurrent operations easier to use, reduce this limitation by allowing a scan operation to be completed in the middle of a p2p_find. In addition, allow station mode association to be completed. When the station mode operation is run to its completion (scan results not acted on, connection to an AP completed, connection failed), resume the p2p_find operation. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-23 18:42:53 +02:00
unsigned int sta_scan_pending:1;
P2P: Add automatic GO Negotiation vs. join-a-group selection p2p_connect command can now be used with an optional "auto" parameter to request wpa_supplicant to determine automatically whether to use join-a-group operation (if the peer is operating as a GO) or group formation. This makes it easier for external programs to handle connection type selection by offloading this to wpa_supplicant. The previously used p2p_connect join commands can be replaced with p2p_connect auto to use this new mechanism. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-13 15:04:36 +02:00
unsigned int p2p_auto_join:1;
P2P: Add p2p_prov_disc auto mechanism wpa_supplicant can now be requested to automatically figure out whether the indicated peer is operating as a GO and if so, use join-a-group style PD instead of pre-GO Negotiation PD. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-26 16:13:03 +02:00
unsigned int p2p_auto_pd:1;
P2P: Add automatic GO Negotiation vs. join-a-group selection p2p_connect command can now be used with an optional "auto" parameter to request wpa_supplicant to determine automatically whether to use join-a-group operation (if the peer is operating as a GO) or group formation. This makes it easier for external programs to handle connection type selection by offloading this to wpa_supplicant. The previously used p2p_connect join commands can be replaced with p2p_connect auto to use this new mechanism. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-13 15:04:36 +02:00
unsigned int p2p_persistent_group:1;
P2P: Allow older scan results to improve p2p_connect-auto robustness Previusly the peer was assumed to not be operating a GO if the BSS entry for it was not updated in the single scan run started by p2p_connect-auto. This is not very robust since a scan may miss the peer if either a Probe Request or Probe Response frame is lost. Improve robustness by assuming the peer is still operating the GO and starting the join operation. If the GO is not found during PD-for-join or the single-channel scans during the join, fall back to GO Negotiation. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-08 16:13:56 +02:00
unsigned int p2p_fallback_to_go_neg:1;
P2P: Add option for Provision Discovery before GO Negotiation This is a workaround for interoperability issues with some deployed P2P implementations that require a Provision Discovery exchange to be used before GO Negotiation. The new provdisc parameter for the p2p_connect command can be used to request this behavior without having to run a separate p2p_prov_disc command. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-11 15:25:47 +02:00
unsigned int p2p_pd_before_go_neg:1;
P2P: Add optional "ht40" argument for p2p_connect This can be used to start negotiated GO in 40 MHz channel width in 5GHz band. Signed-hostap: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
2012-08-15 22:07:44 +02:00
unsigned int p2p_go_ht40:1;
P2P: Set user_initiated_pd separately from the join parameter p2p_prov_disc_req() used the join parameter to figure out whether the PD request was a user initiated or not. This does not cover all use cases of PD, so add a separate parameter to allow caller to indicate whether the user requested the operation. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-22 23:48:58 +01:00
unsigned int user_initiated_pd:1;
P2P: Allow p2p_invite-persistent to specify channel for GO The freq and ht40 parameters can now be used with the p2p_invite command when reinvoking a persistent group as the GO. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-31 20:20:51 +02:00
int p2p_persistent_go_freq;
P2P: Add option to force SSID/passphrase for GO Negotiation An existing persistent group information can now be used to force GO Negotiation to use the previously used SSID/passphrase from a persistent group if we become a GO. This can be used as an alternative to inviting a new P2P peer to join the group (i.e., use GO Negotiation with GO intent 15 instead of starting an autonomous GO and using invitation), e.g., in case a GO Negotiation Request is received from a peer while we are not running as a GO. The persistent group to use for parameters is indicated with persistent=<network id> parameter to p2p_connect. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-27 17:17:10 +02:00
int p2p_persistent_id;
P2P: Add automatic GO Negotiation vs. join-a-group selection p2p_connect command can now be used with an optional "auto" parameter to request wpa_supplicant to determine automatically whether to use join-a-group operation (if the peer is operating as a GO) or group formation. This makes it easier for external programs to handle connection type selection by offloading this to wpa_supplicant. The previously used p2p_connect join commands can be replaced with p2p_connect auto to use this new mechanism. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-13 15:04:36 +02:00
int p2p_go_intent;
int p2p_connect_freq;
struct os_time p2p_auto_started;
P2P: Add initial version of P2P Module
2010-07-18 23:30:25 +02:00
#endif /* CONFIG_P2P */
Add preliminary background scan and roaming module design This allows background scanning and roaming decisions to be contained in a single place based on a defined set of notification events which will hopefully make it easier to experiment with roaming improvements. In addition, this allows multiple intra-ESS roaming policies to be used (each network configuration block can configure its own bgscan module). The beacon loss and signal strength notifications are implemented for the bgscan API, but the actual events are not yet available from the driver. The included sample bgscan module ("simple") is an example of what can be done with the new bgscan mechanism. It requests periodic background scans when the device remains associated with an ESS and has couple of notes on what a more advanced bgscan module could do to optimize background scanning and roaming. The periodic scans will cause the scan result handler to pick a better AP if one becomes available. This bgscan module can be taken into use by adding bgscan="simple" (or bgscan="simple:<bgscan interval in seconds>") into the network configuration block.
2009-09-14 23:08:24 +02:00
struct wpa_ssid *bgscan_ssid;
const struct bgscan_ops *bgscan;
void *bgscan_priv;
Optimize post-WPS scan based on channel used during provisioning Scan only the frequency that was used during provisioning during the first five scans for the connection. This speeds up connection in the most likely case where the AP remains on the same channel. If the AP is not found after these initial scans, all channels will be scanned.
2010-04-11 18:06:42 +02:00
Add automatic scanning support Like bgscan, autoscan is an optional module based feature to automate scanning but while disconnected or inactive. Instead of requesting directly a scan, it only sets the scan_interval and the sched_scan_interval. So, if the driver supports sched_scan, autoscan will be able to tweak its interval. Otherwise, the tweaked scan_interval will be used. If scan parameters needs to be tweaked, an autoscan_params pointer in wpa_s will provide those. So req_scan / req_sched_scan will not set the scan parameters as they usually do, but instead will use this pointer. Modules will not have to request a scan directly, like bgscan does. Instead, it will need to return the interval it wants after each notification. Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 17:55:41 +02:00
const struct autoscan_ops *autoscan;
struct wpa_driver_scan_params *autoscan_params;
void *autoscan_priv;
P2P: Start GO without extra scan step There are some corner cases, where the wpa_supplicant_req_scan() call may end up scheduling a scan even if we are about to start a GO. Avoid this by explicitly marking the GO network to be selected for the next connection.
2011-06-21 10:47:03 +02:00
struct wpa_ssid *connect_without_scan;
Add an option to request a connection without a new scan
2010-04-11 18:55:40 +02:00
WPS: Maintain more AP state during WPS PIN iteration Maintain state of WPS APs during iteration to find the correct AP for WPS PIN operation when no specific BSSID is specified. This information can be used for optimizing the order in which the APs are tried. This commit is only adding the collection of the information and more detailed debug information to make debug logs more helpful in figuring out how the AP selection order could be improved. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-27 12:48:11 +02:00
struct wps_ap_info *wps_ap;
size_t num_wps_ap;
int wps_ap_iter;
Optimize post-WPS scan based on channel used during provisioning Scan only the frequency that was used during provisioning during the first five scans for the connection. This speeds up connection in the most likely case where the AP remains on the same channel. If the AP is not found after these initial scans, all channels will be scanned.
2010-04-11 18:06:42 +02:00
int after_wps;
WPS: Use single channel scan if AP channel already known If the BSSID of the AP is specified in the WPS command, the target AP is likely already in the BSS table and its operating channel is known. Use this information to speed up connection by only scanning the known channel. Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-31 12:17:20 +01:00
int known_wps_freq;
Optimize post-WPS scan based on channel used during provisioning Scan only the frequency that was used during provisioning during the first five scans for the connection. This speeds up connection in the most likely case where the AP remains on the same channel. If the AP is not found after these initial scans, all channels will be scanned.
2010-04-11 18:06:42 +02:00
unsigned int wps_freq;
WPS: Use AP Channel attribute in credential to speed up scan When WPS is used with NFC connection handover, the AP may indicate its operating channel within the credential information. Use this informatiom, if present, to speed up the scan process. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-10-28 17:02:04 +01:00
u16 wps_ap_channel;
WPS: Make fragment size configurable for EAP-WSC peer "wpa_cli set wps_fragment_size <val>" can now be used to configure the fragment size limit for EAP-WSC.
2010-07-22 19:24:23 +02:00
int wps_fragment_size;
Add option for disabling automatic reconnection on disconnection ctrl_interface STA_AUTOCONNECT command can now be used to disable automatic reconnection on receiving disconnection event. The default behavior is for wpa_supplicant to try to reconnect automatically, i.e., to maintain previous behavior.
2010-09-06 16:28:45 +02:00
int auto_reconnect_disabled;
P2P: Add support for automatic channel selection at GO The driver wrapper may now indicate the preferred channel (e.g., based on scan results) on both 2.4 GHz and 5 GHz bands (and an overall best frequency). When setting up a GO, this preference information is used to select the operating channel if configuration does not include hardcoded channel. Similarly, this information can be used during GO Negotiation to indicate preference for a specific channel based on current channel conditions. p2p_group_add command can now use special values (freq=2 and freq=5) to indicate that the GO is to be started on the specified band.
2010-11-10 12:33:47 +01:00
/* Channel preferences for AP/P2P GO use */
int best_24_freq;
int best_5_freq;
int best_overall_freq;
GAS: Add a generic GAS query module This implements GAS request mechanism that is aimed at being used to replace use case specific GAS/ANQP implementations in the future. Compared to the earlier implementation in P2P SD, this implementation includes support for multiple concurrent requests and more thorough validation of frames against the pending query data. GAS header processing, including comeback and reassembly, are handled within gas_query.c and the users of this module will only need to provide the Query Request and process the (possibly reassembled) Query Response.
2011-09-28 18:44:25 +02:00
struct gas_query *gas;
Interworking: Add ANQP query requests Add mechanism for using GAS/ANQP to query Interworking related information from APs. The received information is stored in the BSS table and can be viewed with ctrl_iface BSS command. New ctrl_iface command ANQP_GET can be used to fetch ANQP elements from a specific AP. Additional commands FETCH_ANQP and STOP_FETCH_ANQP can be used to initiate and stop an iteration through all APs in the BSS table that indicate support Interworking to fetch ANQP elements from them.
2011-10-16 21:44:28 +02:00
#ifdef CONFIG_INTERWORKING
Interworking: Use unsigned integer for bitfield Signed integer with one-bit value does not make much sense, so clean this up by using an unsigned integer instead.
2011-10-20 19:49:21 +02:00
unsigned int fetch_anqp_in_progress:1;
unsigned int network_select:1;
unsigned int auto_select:1;
Interworking: Add optional use of network selection on normal scans auto_interworking=1 configuration parameter can be used to request wpa_supplicant to use Interworking network selection automatically as a part of the normal (non-Interworking) network selection if the scan results do not match with enabled networks. This makes scanning work similarly to the "interworking_select auto" command. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-28 15:14:13 +02:00
unsigned int auto_network_select:1;
Interworking: Fetch only the needed ANQP information Use configured credentials to figure out which ANQP information needs to be fetched and only fetch those when using Interworking network selection. The fetch_anqp command is still fetching all ANQP information. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-02 20:05:54 +02:00
unsigned int fetch_all_anqp:1;
Interworking: Add ANQP query requests Add mechanism for using GAS/ANQP to query Interworking related information from APs. The received information is stored in the BSS table and can be viewed with ctrl_iface BSS command. New ctrl_iface command ANQP_GET can be used to fetch ANQP elements from a specific AP. Additional commands FETCH_ANQP and STOP_FETCH_ANQP can be used to initiate and stop an iteration through all APs in the BSS table that indicate support Interworking to fetch ANQP elements from them.
2011-10-16 21:44:28 +02:00
#endif /* CONFIG_INTERWORKING */
TDLS: Get TDLS related capabilities from driver Put glue code in place to propagate TDLS related driver capabilities to the TDLS state machine. If the driver doesn't support capabilities, assume TDLS is supported internally. When TDLS is explicitly not supported, disable all user facing TDLS operations. Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-09-26 12:55:25 +02:00
unsigned int drv_capa_known;
wpa_supplicant: Unify hardware feature data The hardware feature data is required in several different places throughout the code. Previously, the data was acquired and freed on demand, but with this patch wpa_supplicant will keep a single copy around at runtime for everyone to use. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
2011-10-23 10:58:54 +02:00
struct {
struct hostapd_hw_modes *modes;
u16 num_modes;
u16 flags;
} hw;
Add preferred network offload (PNO) functionality "SET pno <1/0>" ctrl_iface command can now be used to start/stop PNO with sched_scan driver commands. This will request offloading of scanning to find any of the enabled networks in the configuration. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-28 15:32:44 +01:00
int pno;
Export disconnect reason code to dbus In the properties changed signal, added a new property "DisconnectReason", which carries the IEEE 802.11 reason code of the most recent disassociation or deauthentication event. The reason code is negative if it is locally generated. The property is sent to the DBUS immediately so as to prevent it from being coalesced with other disconnect events. Signed-off-by: Gary Morain <gmorain@chromium.org>
2012-06-30 15:43:50 +02:00
/* WLAN_REASON_* reason codes. Negative if locally generated. */
int disconnect_reason;
EXT PW: Add framework for supporting external password storage This new mechanism can be used to make wpa_supplicant using external storage (e.g., key store in the operating system) for passwords, passphrases, and PSKs. This commit is only adding the framework part needed to support this, i.e., no actual configuration parameter can yet use this new mechanism. In addition, only a simple test backend is added to allow developer testing of the functionality. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-03 20:28:42 +02:00
struct ext_password_data *ext_pw;
Add generic GAS request mechanism The new gas_request and gas_response_get commands can be used to request arbitary GAS queries to be performed. These can be used with ANQP or with other (including vendor specific) advertisement protocols. gas_request <BSSID> <AdvProtoID> [Query] gas_response_get <addr> <dialog token> [offset,length] For example, ANQP query for Capability list in interactive wpa_cli session: > gas_request 02:00:00:00:01:00 00 000102000101 <3>GAS-RESPONSE-INFO addr=02:00:00:00:01:00 dialog_token=0 status_code=0 resp_len=32 > gas_response_get 02:00:00:00:01:00 00 01011c00010102010501070108010c01dddd0c00506f9a110200020304050607 > gas_response_get 02:00:00:00:01:00 00 0,10 01011c00010102010501 > gas_response_get 02:00:00:00:01:00 00 10,10 070108010c01dddd0c00 > gas_response_get 02:00:00:00:01:00 00 20,10 506f9a11020002030405 > gas_response_get 02:00:00:00:01:00 00 30,2 0607 It should be noted that the maximum length of the response buffer is currently 4096 bytes which allows about 2000 bytes of the response data to be fetched with a single gas_response_get command. If the response is longer, it can be fetched in pieces as shown in the example above. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-27 17:13:10 +02:00
struct wpabuf *last_gas_resp;
u8 last_gas_addr[ETH_ALEN];
u8 last_gas_dialog_token;
WNM: Add option to disable keep-alive frames for testing purposes "wpa_cli set no_keep_alive 1/0" can now be used to disable/enable keep alive frames to enable testing. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-18 15:57:52 +01:00
unsigned int no_keep_alive:1;
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
};
/* wpa_supplicant.c */
Support HT capability overrides This allows HT capabilities overrides on kernels that support these features. MCS Rates can be disabled to force to slower speeds when using HT. Rates cannot be forced higher. HT can be disabled, forcing an 802.11a/b/g/n station to act like an 802.11a/b/g station. HT40 can be disabled. MAX A-MSDU can be disabled. A-MPDU Factor and A-MPDU Density can be modified. Please note that these are suggestions to the kernel. Only mac80211 drivers will work at all. The A-MPDU Factor can only be decreased and the A-MPDU Density can only be increased currently. Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-01-29 20:01:31 +01:00
void wpa_supplicant_apply_ht_overrides(
struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid,
struct wpa_driver_associate_params *params);
driver_nl80211: Fix MLME key settings for static WEP Current wpa_supplicant has a bug with WEP keys, it adds a zero-length sequence counter field to netlink which the kernel doesn't accept. Additionally, the kernel API slightly changed to accept keys only when connected, so we need to send it the keys after that. For that to work with shared key authentication, we also include the default WEP TX key in the authentication command. To upload the keys properly _after_ associating, add a new flag WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC_DONE indicating that the driver needs the keys at that point and not earlier.
2009-09-15 09:48:30 +02:00
int wpa_set_wep_keys(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid);
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
int wpa_supplicant_reload_configuration(struct wpa_supplicant *wpa_s);
Get rid of unnecessary typedefs for enums.
2009-12-26 09:35:08 +01:00
const char * wpa_supplicant_state_txt(enum wpa_states state);
Update internal MAC address on EVENT_INTERFACE_ENABLED events This allows the MAC address of the interface to be changed when the interface is set down even if the interface does not get completed removed and re-added. Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 12:20:40 +01:00
int wpa_supplicant_update_mac_addr(struct wpa_supplicant *wpa_s);
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
int wpa_supplicant_driver_init(struct wpa_supplicant *wpa_s);
int wpa_supplicant_set_suites(struct wpa_supplicant *wpa_s,
Use BSS table entry instead of raw scan result for connection
2010-01-02 15:16:02 +01:00
struct wpa_bss *bss, struct wpa_ssid *ssid,
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
u8 *wpa_ie, size_t *wpa_ie_len);
void wpa_supplicant_associate(struct wpa_supplicant *wpa_s,
Use BSS table entry instead of raw scan result for connection
2010-01-02 15:16:02 +01:00
struct wpa_bss *bss,
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
struct wpa_ssid *ssid);
void wpa_supplicant_set_non_wpa_policy(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid);
void wpa_supplicant_initiate_eapol(struct wpa_supplicant *wpa_s);
void wpa_clear_keys(struct wpa_supplicant *wpa_s, const u8 *addr);
void wpa_supplicant_req_auth_timeout(struct wpa_supplicant *wpa_s,
int sec, int usec);
Reinitialize autoscan on explicit reassocciate/reconnect command This clears the exponential scan interval back to the base value when a reconnection is requested explicitly. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-26 19:05:51 +02:00
void wpa_supplicant_reinit_autoscan(struct wpa_supplicant *wpa_s);
Get rid of unnecessary typedefs for enums.
2009-12-26 09:35:08 +01:00
void wpa_supplicant_set_state(struct wpa_supplicant *wpa_s,
enum wpa_states state);
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
struct wpa_ssid * wpa_supplicant_get_ssid(struct wpa_supplicant *wpa_s);
wpa_supplicant: Add wpa_supplicant_get_eap_mode method Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-15 12:53:08 +01:00
const char * wpa_supplicant_get_eap_mode(struct wpa_supplicant *wpa_s);
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
void wpa_supplicant_cancel_auth_timeout(struct wpa_supplicant *wpa_s);
void wpa_supplicant_deauthenticate(struct wpa_supplicant *wpa_s,
int reason_code);
Use shared functions for network operations and param changes Instead of implementing these separately in various control interface handlers, use shared functions. These add some of the previously missing notification calls, too, for the affected areas.
2009-09-13 20:16:43 +02:00
void wpa_supplicant_enable_network(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid);
void wpa_supplicant_disable_network(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid);
void wpa_supplicant_select_network(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid);
int wpa_supplicant_set_ap_scan(struct wpa_supplicant *wpa_s,
int ap_scan);
wpa_supplicant: Parameterize BSS table expiration age + count Replace compile-time BSS cache expiration age and scan count by config parameters that can be set via wpa_cli and the new D-Bus API. The latter is done with interface properties BSSExpireAge and BSSExpireCount.
2011-03-20 11:40:59 +01:00
int wpa_supplicant_set_bss_expiration_age(struct wpa_supplicant *wpa_s,
unsigned int expire_age);
int wpa_supplicant_set_bss_expiration_count(struct wpa_supplicant *wpa_s,
unsigned int expire_count);
Create DBus getter/setter for ScanInterval Enable control of wpa_s->scan_interval via D-Bus. This parameter controls the delay between successive scans for a suitable AP. Also, update dbus.doxygen with ScanInterval, and some other parameters that were undocumented. Signed-hostap: Mukesh Agrawal <quiche@chromium.org>
2012-04-01 17:05:22 +02:00
int wpa_supplicant_set_scan_interval(struct wpa_supplicant *wpa_s,
int scan_interval);
Use shared functions for network operations and param changes Instead of implementing these separately in various control interface handlers, use shared functions. These add some of the previously missing notification calls, too, for the affected areas.
2009-09-13 20:16:43 +02:00
int wpa_supplicant_set_debug_params(struct wpa_global *global,
int debug_level, int debug_timestamp,
int debug_show_keys);
Fix processing of channel list update events Commit 6bf731e8cea4d9d41665d271b331e096c7c569e9 broke handling of EVENT_CHANNEL_LIST_CHANGED by introducing a cached copy of the driver channel list that does not get updated even if driver changes its list. Fix this by synchronizing the cacched wpa_s->hw.modes information whenever EVENT_CHANNEL_LIST_CHANGED is processed. This fixes P2P channel list updates based on regulatory domain hints that may trigger driver to change its supported channel list. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com> intended-for: hostap-1
2012-03-01 16:53:53 +01:00
void free_hw_features(struct wpa_supplicant *wpa_s);
Use shared functions for network operations and param changes Instead of implementing these separately in various control interface handlers, use shared functions. These add some of the previously missing notification calls, too, for the affected areas.
2009-09-13 20:16:43 +02:00
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
void wpa_show_license(void);
struct wpa_supplicant * wpa_supplicant_add_iface(struct wpa_global *global,
struct wpa_interface *iface);
int wpa_supplicant_remove_iface(struct wpa_global *global,
Let wpa_supplicant_deinit_iface() know that process is terminating This will be needed to be able to move ctrl_iface TERMINATING event to the end of interface removal. Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-01-29 19:15:48 +01:00
struct wpa_supplicant *wpa_s,
int terminate);
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
struct wpa_supplicant * wpa_supplicant_get_iface(struct wpa_global *global,
const char *ifname);
struct wpa_global * wpa_supplicant_init(struct wpa_params *params);
int wpa_supplicant_run(struct wpa_global *global);
void wpa_supplicant_deinit(struct wpa_global *global);
int wpa_supplicant_scard_init(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid);
WPS ER: Delay wpa_supplicant termination to allow unsubscription Instead of forcefully deinitializing ER immediately, give it some time to complete unsubscription and call eloop_terminate() only once ER code has completed its work.
2009-12-19 22:47:54 +01:00
void wpa_supplicant_terminate_proc(struct wpa_global *global);
Use driver event, EVENT_EAPOL_RX, for EAPOL frame indication
2010-01-03 16:44:40 +01:00
void wpa_supplicant_rx_eapol(void *ctx, const u8 *src_addr,
const u8 *buf, size_t len);
Add more wpa_supplicant AP mode parameters for the driver wrapper This makes it easier to configure AP mode for drivers that take care of WPA/RSN IE generation.
2010-04-11 19:02:01 +02:00
enum wpa_key_mgmt key_mgmt2driver(int key_mgmt);
enum wpa_cipher cipher_suite2driver(int cipher);
Allow ctrl_iface SET command to change global config parameters
2010-07-18 23:30:24 +02:00
void wpa_supplicant_update_config(struct wpa_supplicant *wpa_s);
P2P: Add initial version of P2P Module
2010-07-18 23:30:25 +02:00
void wpa_supplicant_clear_status(struct wpa_supplicant *wpa_s);
Extend load balancing optimization in BSS blacklisting Move the previously SME specific optimization code into generic function that can be used from non-SME code, too, and use it to handle disconnection events. In other words, allow disconnection event to trigger similar optimized scanning case to handle a common load balancing mechanism. If there is another BSS in the same ESS when we receive a disconnection event, scan only the known frequencies of such other BSSes on the next attempt to speed up recovery.
2010-11-26 10:36:03 +01:00
void wpas_connection_failed(struct wpa_supplicant *wpa_s, const u8 *bssid);
Support driver-based BSS selection in ap_scan=1 mode If the driver indicates that it supports BSS selection (including roaming within an ESS) with WPA_DRIVER_FLAGS_BSS_SELECTION, modify ap_scan=1 mode to behave like ap_scan=2 mode for BSS selection. The initial scan is still done to avoid the need for strict configuration of or security parameters (e.g., to figure out whether TKIP or CCMP is being used as the group cipher). However, when requesting the driver to connect, the bssid and freq parameters are not provided to leave the driver in control of selecting which BSS to use and to allow the driver to decide when to roam.
2011-09-26 13:57:23 +02:00
int wpas_driver_bss_selection(struct wpa_supplicant *wpa_s);
P2P: Add preference setting for concurrent use cases Add an additional parameter to prioritize either sta or p2p connection to resolve conflicts arising during single channel concurrency. Signed-hostap: Jithu Jance <jithu@broadcom.com>
2012-06-10 19:53:09 +02:00
int wpas_is_p2p_prioritized(struct wpa_supplicant *wpa_s);
Disable network block temporarily on authentication failures If 4-way handshake fails due to likely PSK failure or if EAP authentication fails, disable the network block temporarily. Use longer duration if multiple consecutive failures are seen. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-26 22:01:26 +02:00
void wpas_auth_failed(struct wpa_supplicant *wpa_s);
void wpas_clear_temp_disabled(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid, int clear_failures);
Add disallow_aps parameter to disallow BSSIDs/SSIDs External programs can use this new parameter to prevent wpa_supplicant from connecting to a list of BSSIDs and/or SSIDs. The disallowed BSSes will still be visible in scan results and it is possible to run ANQP operations with them, but BSS selection for connection will skip any BSS that matches an entry in the disallowed list. The new parameter can be set with the control interface SET command using following syntax: SET disallow_aps <disallow_list> disallow_list ::= <ssid_spec> | <bssid_spec> | <disallow_list> | “” SSID_SPEC ::= ssid <SSID_HEX> BSSID_SPEC ::= bssid <BSSID_HEX> For example: wpa_cli set disallow_list "ssid 74657374 bssid 001122334455 ssid 68656c6c6f" wpa_cli set disallow_list (the empty value removes all entries) Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-09-27 16:36:59 +02:00
int disallowed_bssid(struct wpa_supplicant *wpa_s, const u8 *bssid);
int disallowed_ssid(struct wpa_supplicant *wpa_s, const u8 *ssid,
size_t ssid_len);
Use a shared function for requesting a new connection Both the ctrl_iface and D-Bus interface use similar functionality to request a new connection. Combine these to a single function to avoid need to maintain duplicated implementation. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-25 15:30:30 +01:00
void wpas_request_connection(struct wpa_supplicant *wpa_s);
Share a single function for building extended capabilities element This makes it easier to update extended capabilities for all uses within wpa_supplicant. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-12-22 18:17:15 +01:00
int wpas_build_ext_capab(struct wpa_supplicant *wpa_s, u8 *buf);
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
Fix D-Bus build without ctrl_iface Commit 7de5688d682d4a96a4ce1f7959428a0112d4b75f started using wpa_supplicant_ctrl_iface_ctrl_rsp_handle() from the D-Bus code, but left this function in ctrl_iface.c that is included conditionally. Fix this by moving the common function into wpa_supplicant.c so that it can be included for builds that include only either ctrl_iface or D-Bus. Signed-hostap: Jouni Malinen <j@w1.fi> intended-for: hostap-1
2012-04-27 20:21:31 +02:00
/**
* wpa_supplicant_ctrl_iface_ctrl_rsp_handle - Handle a control response
* @wpa_s: Pointer to wpa_supplicant data
* @ssid: Pointer to the network block the reply is for
* @field: field the response is a reply for
* @value: value (ie, password, etc) for @field
* Returns: 0 on success, non-zero on error
*
* Helper function to handle replies to control interface requests.
*/
int wpa_supplicant_ctrl_iface_ctrl_rsp_handle(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid,
const char *field,
const char *value);
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
/* events.c */
void wpa_supplicant_mark_disassoc(struct wpa_supplicant *wpa_s);
P2P: Fix wpa_supplicant crash on P2P WPS PBC overlap case Once PBC overlap detected when using dynamic group interfaces, the wpa_s corresponding to P2P group interface is freed. This patch avoids accessing the wpa_s data structure after it is freed. This fixes a possible crash in P2P client role in such a case.
2011-10-24 22:37:39 +02:00
int wpa_supplicant_connect(struct wpa_supplicant *wpa_s,
struct wpa_bss *selected,
struct wpa_ssid *ssid);
Fix TKIP countermeasures stopping in deinit paths The eloop timeout to stop TKIP countermeasures has to be canceled on deinit path to avoid leaving bogus timeouts behind. Signed-hostap: Jouni Malinen <j@w1.fi>
2011-10-30 11:43:30 +01:00
void wpa_supplicant_stop_countermeasures(void *eloop_ctx, void *sock_ctx);
void wpa_supplicant_delayed_mic_error_report(void *eloop_ctx, void *sock_ctx);
WNM: Add advertisement of BSS max idle period If WNM is enabled for the build (CONFIG_WNM=y), add BSS max idle period information to the (Re)Association Response frame from the AP and parse this information on the station. For SME-in-wpa_supplicant case, add a timer to handle periodic transmission of the keep-alive frame. The actual request for the driver to transmit a frame is not yet implemented. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-28 02:35:00 +02:00
void wnm_bss_keep_alive_deinit(struct wpa_supplicant *wpa_s);
Interworking: Skip extra scan after network auto-select If the scan results from before ANQP fetch are fresh (less than five seconds old), do not run a new scan when selecting the BSS after having used Interworking network selection. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-02 19:18:48 +02:00
int wpas_select_network_from_last_scan(struct wpa_supplicant *wpa_s);
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
Move EAP method registration away from src/eap_{peer,server} This makes it easier to make a library out of EAP methods without losing possiblity of binary size optimization by linker dropping unreferenced code.
2009-12-06 10:28:41 +01:00
/* eap_register.c */
int eap_register_methods(void);
P2P: Update D-Bus network object semantics during group formation Do not emit network objects during P2P group formation since such network objects can confuse certain apps. Instead, a persistent group object is created to allow apps to keep track of persistent groups. Persistent group objects only represent the info needed to recreate the group. Also fixes a minor bug in the handling of persistent group objects during WPS operations. Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-23 20:25:13 +02:00
/**
* Utility method to tell if a given network is a persistent group
* @ssid: Network object
* Returns: 1 if network is a persistent group, 0 otherwise
*/
static inline int network_is_persistent_group(struct wpa_ssid *ssid)
{
return ((ssid->disabled == 2) || ssid->p2p_persistent_group);
}
Validate WEP key lengths based on driver capabilities The nl80211 driver interface does not allow 128-bit WEP to be used without a vendor specific cipher suite and no such suite is defined for this purpose. Do not accept WEP key length 16 for nl80211 driver interface forn ow. wext-interface can still try to use these for backwards compatibility. Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-10 13:34:46 +02:00
int wpas_network_disabled(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid);
EXT PW: Add framework for supporting external password storage This new mechanism can be used to make wpa_supplicant using external storage (e.g., key store in the operating system) for passwords, passphrases, and PSKs. This commit is only adding the framework part needed to support this, i.e., no actual configuration parameter can yet use this new mechanism. In addition, only a simple test backend is added to allow developer testing of the functionality. Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-03 20:28:42 +02:00
int wpas_init_ext_pw(struct wpa_supplicant *wpa_s);
Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release
2008-02-28 02:34:43 +01:00
#endif /* WPA_SUPPLICANT_I_H */
Reference in a new issue Copy permalink