2014-01-24 14:58:00 +01:00
|
|
|
/*
|
|
|
|
* Qualcomm Atheros OUI and vendor specific assignments
|
2015-02-05 22:13:48 +01:00
|
|
|
* Copyright (c) 2014-2015, Qualcomm Atheros, Inc.
|
2014-01-24 14:58:00 +01:00
|
|
|
*
|
|
|
|
* This software may be distributed under the terms of the BSD license.
|
|
|
|
* See README for more details.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef QCA_VENDOR_H
|
|
|
|
#define QCA_VENDOR_H
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This file is a registry of identifier assignments from the Qualcomm Atheros
|
|
|
|
* OUI 00:13:74 for purposes other than MAC address assignment. New identifiers
|
|
|
|
* can be assigned through normal review process for changes to the upstream
|
|
|
|
* hostap.git repository.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define OUI_QCA 0x001374
|
|
|
|
|
2014-04-09 11:53:16 +02:00
|
|
|
/**
|
|
|
|
* enum qca_radiotap_vendor_ids - QCA radiotap vendor namespace IDs
|
|
|
|
*/
|
|
|
|
enum qca_radiotap_vendor_ids {
|
|
|
|
QCA_RADIOTAP_VID_WLANTEST = 0,
|
|
|
|
};
|
|
|
|
|
2014-01-24 14:58:00 +01:00
|
|
|
/**
|
|
|
|
* enum qca_nl80211_vendor_subcmds - QCA nl80211 vendor command identifiers
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_UNSPEC: Reserved value 0
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_TEST: Test command/event
|
2014-01-24 15:14:29 +01:00
|
|
|
*
|
2014-09-11 14:54:57 +02:00
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_ROAMING: Set roaming policy for drivers that use
|
|
|
|
* internal BSS-selection. This command uses
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY to specify the new roaming policy
|
|
|
|
* for the current connection (i.e., changes policy set by the nl80211
|
|
|
|
* Connect command). @QCA_WLAN_VENDOR_ATTR_MAC_ADDR may optionally be
|
|
|
|
* included to indicate which BSS to use in case roaming is disabled.
|
|
|
|
*
|
2014-01-24 15:14:29 +01:00
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY: Recommendation of frequency
|
|
|
|
* ranges to avoid to reduce issues due to interference or internal
|
|
|
|
* co-existence information in the driver. The event data structure is
|
|
|
|
* defined in struct qca_avoid_freq_list.
|
2014-03-22 20:20:32 +01:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY: Command to check driver support
|
|
|
|
* for DFS offloading.
|
2014-04-01 20:13:49 +02:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_NAN: NAN command/event which is used to pass
|
|
|
|
* NAN Request/Response and NAN Indication messages. These messages are
|
|
|
|
* interpreted between the framework and the firmware component.
|
2014-10-23 17:21:49 +02:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Set key operation that can be
|
|
|
|
* used to configure PMK to the driver even when not connected. This can
|
2014-12-06 01:48:23 +01:00
|
|
|
* be used to request offloading of key management operations. Only used
|
|
|
|
* if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD.
|
|
|
|
*
|
2014-10-23 17:21:49 +02:00
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH: An extended version of
|
|
|
|
* NL80211_CMD_ROAM event with optional attributes including information
|
|
|
|
* from offloaded key management operation. Uses
|
2014-12-06 01:48:23 +01:00
|
|
|
* enum qca_wlan_vendor_attr_roam_auth attributes. Only used
|
|
|
|
* if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD.
|
2014-11-18 19:11:09 +01:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_DO_ACS: ACS command/event which is used to
|
|
|
|
* invoke the ACS function in device and pass selected channels to
|
|
|
|
* hostapd.
|
2014-12-06 01:48:23 +01:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES: Command to get the features
|
|
|
|
* supported by the driver. enum qca_wlan_vendor_features defines
|
|
|
|
* the possible features.
|
2015-02-05 22:13:48 +01:00
|
|
|
*
|
2015-02-11 03:48:39 +01:00
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED: Event used by driver,
|
|
|
|
* which supports DFS offloading, to indicate a channel availability check
|
|
|
|
* start.
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED: Event used by driver,
|
|
|
|
* which supports DFS offloading, to indicate a channel availability check
|
|
|
|
* completion.
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED: Event used by driver,
|
|
|
|
* which supports DFS offloading, to indicate that the channel availability
|
|
|
|
* check aborted, no change to the channel status.
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED: Event used by
|
|
|
|
* driver, which supports DFS offloading, to indicate that the
|
|
|
|
* Non-Occupancy Period for this channel is over, channel becomes usable.
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED: Event used by driver,
|
|
|
|
* which supports DFS offloading, to indicate a radar pattern has been
|
|
|
|
* detected. The channel is now unusable.
|
2016-06-24 02:32:09 +02:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START: Command used to
|
|
|
|
* start the P2P Listen offload function in device and pass the listen
|
|
|
|
* channel, period, interval, count, device types, and vendor specific
|
|
|
|
* information elements to the device driver and firmware.
|
|
|
|
* Uses the attributes defines in
|
|
|
|
* enum qca_wlan_vendor_attr_p2p_listen_offload.
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP: Command/event used to
|
|
|
|
* indicate stop request/response of the P2P Listen offload function in
|
|
|
|
* device. As an event, it indicates either the feature stopped after it
|
|
|
|
* was already running or feature has actually failed to start. Uses the
|
|
|
|
* attributes defines in enum qca_wlan_vendor_attr_p2p_listen_offload.
|
2016-07-18 14:29:43 +02:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH: After AP starts
|
|
|
|
* beaconing, this sub command provides the driver, the frequencies on the
|
|
|
|
* 5 GHz band to check for any radar activity. Driver selects one channel
|
|
|
|
* from this priority list provided through
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST and starts
|
|
|
|
* to check for radar activity on it. If no radar activity is detected
|
|
|
|
* during the channel availability check period, driver internally switches
|
|
|
|
* to the selected frequency of operation. If the frequency is zero, driver
|
|
|
|
* internally selects a channel. The status of this conditional switch is
|
|
|
|
* indicated through an event using the same sub command through
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS. Attributes are
|
|
|
|
* listed in qca_wlan_vendor_attr_sap_conditional_chan_switch.
|
2016-08-01 19:17:35 +02:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND: Set GPIO pins. This uses the
|
|
|
|
* attributes defined in enum qca_wlan_gpio_attr.
|
2016-08-10 15:49:46 +02:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY: Fetch hardware capabilities.
|
|
|
|
* This uses @QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY to indicate which
|
|
|
|
* capabilities are to be fetched and other
|
|
|
|
* enum qca_wlan_vendor_attr_get_hw_capability attributes to return the
|
|
|
|
* requested capabilities.
|
2016-09-05 10:22:38 +02:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT: Link layer statistics extension.
|
|
|
|
* enum qca_wlan_vendor_attr_ll_stats_ext attributes are used with this
|
|
|
|
* command and event.
|
2016-06-29 16:05:39 +02:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA: Get capabilities for
|
|
|
|
* indoor location features. Capabilities are reported in
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_LOC_CAPA.
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION: Start an FTM
|
|
|
|
* (fine timing measurement) session with one or more peers.
|
|
|
|
* Specify Session cookie in QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE and
|
|
|
|
* peer information in QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS.
|
|
|
|
* On success, 0 or more QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT
|
|
|
|
* events will be reported, followed by
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE event to indicate
|
|
|
|
* end of session.
|
|
|
|
* Refer to IEEE P802.11-REVmc/D7.0, 11.24.6
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION: Abort a running session.
|
|
|
|
* A QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE will be reported with
|
|
|
|
* status code indicating session was aborted.
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT: Event with measurement
|
|
|
|
* results for one peer. Results are reported in
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS.
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE: Event triggered when
|
|
|
|
* FTM session is finished, either successfully or aborted by
|
|
|
|
* request.
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER: Configure FTM responder
|
|
|
|
* mode. QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE specifies whether
|
|
|
|
* to enable or disable the responder. LCI/LCR reports can be
|
|
|
|
* configured with QCA_WLAN_VENDOR_ATTR_FTM_LCI and
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_FTM_LCR. Can be called multiple
|
|
|
|
* times to update the LCI/LCR reports.
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS: Perform a standalone AOA (angle of
|
|
|
|
* arrival) measurement with a single peer. Specify peer MAC address in
|
2016-09-25 11:29:07 +02:00
|
|
|
* QCA_WLAN_VENDOR_ATTR_MAC_ADDR and optionally frequency (MHz) in
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_FREQ (if not specified, locate peer in kernel
|
|
|
|
* scan results cache and use the frequency from there).
|
|
|
|
* Also specify measurement type in QCA_WLAN_VENDOR_ATTR_AOA_TYPE.
|
|
|
|
* Measurement result is reported in
|
2016-06-29 16:05:39 +02:00
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT event.
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS: Abort an AOA measurement. Specify
|
|
|
|
* peer MAC address in QCA_WLAN_VENDOR_ATTR_MAC_ADDR.
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT: Event that reports
|
|
|
|
* the AOA measurement result.
|
|
|
|
* Peer MAC address reported in QCA_WLAN_VENDOR_ATTR_MAC_ADDR.
|
|
|
|
* success/failure status is reported in
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS.
|
|
|
|
* Measurement data is reported in QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT.
|
|
|
|
* The antenna array(s) used in the measurement are reported in
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK.
|
2016-09-21 09:37:32 +02:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST: Encrypt/decrypt the given
|
|
|
|
* data as per the given parameters.
|
2016-09-20 09:38:16 +02:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI: Get antenna RSSI value for a
|
|
|
|
* specific chain.
|
2016-09-26 23:09:36 +02:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG: Get low level
|
|
|
|
* configuration for a DMG RF sector. Specify sector index in
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX, sector type in
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE and RF modules
|
|
|
|
* to return sector information for in
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_DMG_RF_MODULE_MASK. Returns sector configuration
|
|
|
|
* in QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG. Also return the
|
|
|
|
* exact time where information was captured in
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_TSF.
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG: Set low level
|
|
|
|
* configuration for a DMG RF sector. Specify sector index in
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX, sector type in
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE and sector configuration
|
|
|
|
* for one or more DMG RF modules in
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG.
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SELECTED_SECTOR: Get selected
|
|
|
|
* DMG RF sector for a station. This is the sector that the HW
|
|
|
|
* will use to communicate with the station. Specify the MAC address
|
|
|
|
* of associated station/AP/PCP in QCA_WLAN_VENDOR_ATTR_MAC_ADDR (not
|
|
|
|
* needed for unassociated station). Specify sector type to return in
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE. Returns the selected
|
|
|
|
* sector index in QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX.
|
|
|
|
* Also return the exact time where the information was captured
|
|
|
|
* in QCA_WLAN_VENDOR_ATTR_TSF.
|
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR: Set the
|
|
|
|
* selected DMG RF sector for a station. This is the sector that
|
|
|
|
* the HW will use to communicate with the station.
|
|
|
|
* Specify the MAC address of associated station/AP/PCP in
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_MAC_ADDR, the sector type to select in
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE and the sector index
|
|
|
|
* in QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX.
|
|
|
|
* The selected sector will be locked such that it will not be
|
|
|
|
* modified like it normally does (for example when station
|
|
|
|
* moves around). To unlock the selected sector for a station
|
|
|
|
* pass the special value 0xFFFF in the sector index. To unlock
|
|
|
|
* all connected stations also pass a broadcast MAC address.
|
2016-10-25 12:50:46 +02:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS: Configure the TDLS behavior
|
|
|
|
* in the host driver. The different TDLS configurations are defined
|
|
|
|
* by the attributes in enum qca_wlan_vendor_attr_tdls_configuration.
|
2016-11-22 16:20:08 +01:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN: Abort an ongoing vendor scan that was
|
|
|
|
* started with QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN. This command
|
|
|
|
* carries the scan cookie of the corresponding scan request. The scan
|
|
|
|
* cookie is represented by QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE.
|
2016-12-06 01:13:36 +01:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS: Set the Specific
|
|
|
|
* Absorption Rate (SAR) power limits. A critical regulation for
|
|
|
|
* FCC compliance, OEMs require methods to set SAR limits on TX
|
|
|
|
* power of WLAN/WWAN. enum qca_vendor_attr_sar_limits
|
|
|
|
* attributes are used with this command.
|
2017-01-06 12:27:55 +01:00
|
|
|
*
|
|
|
|
* @QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS: This command/event is used by the
|
|
|
|
* host driver for offloading the implementation of Auto Channel Selection
|
|
|
|
* (ACS) to an external user space entity. This interface is used as the
|
|
|
|
* event from the host driver to the user space entity and also as the
|
|
|
|
* request from the user space entity to the host driver. The event from
|
|
|
|
* the host driver is used by the user space entity as an indication to
|
|
|
|
* start the ACS functionality. The attributes used by this event are
|
|
|
|
* represented by the enum qca_wlan_vendor_attr_external_acs_event.
|
|
|
|
* User space entity uses the same interface to inform the host driver with
|
|
|
|
* selected channels after the ACS operation using the attributes defined
|
|
|
|
* by enum qca_wlan_vendor_attr_external_acs_channels.
|
2014-01-24 14:58:00 +01:00
|
|
|
*/
|
|
|
|
enum qca_nl80211_vendor_subcmds {
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_TEST = 1,
|
2014-09-11 14:54:57 +02:00
|
|
|
/* subcmds 2..8 not yet allocated */
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_ROAMING = 9,
|
2014-01-24 15:14:29 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY = 10,
|
2014-03-22 20:20:32 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY = 11,
|
2014-04-01 20:13:49 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_NAN = 12,
|
2016-10-26 15:20:46 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_STATS_EXT = 13,
|
2014-11-21 20:46:01 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET = 14,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET = 15,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR = 16,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS = 17,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS = 18,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS = 19,
|
2014-12-02 15:19:25 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_START = 20,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_STOP = 21,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_VALID_CHANNELS = 22,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CAPABILITIES = 23,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CACHED_RESULTS = 24,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_RESULTS_AVAILABLE = 25,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_FULL_SCAN_RESULT = 26,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_EVENT = 27,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_FOUND = 28,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_BSSID_HOTLIST = 29,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_BSSID_HOTLIST = 30,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SIGNIFICANT_CHANGE = 31,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SIGNIFICANT_CHANGE = 32,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_SIGNIFICANT_CHANGE = 33,
|
2014-11-21 20:46:01 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE = 34,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE = 35,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS = 36,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE = 37,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES = 38,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI = 39,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG = 40,
|
2014-12-02 22:36:12 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_LOST = 41,
|
2014-11-21 20:46:01 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX = 42,
|
|
|
|
/* 43..49 - reserved for QCA */
|
2014-10-23 17:21:49 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY = 50,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH = 51,
|
2014-11-13 15:26:55 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_APFIND = 52,
|
2015-04-22 10:21:18 +02:00
|
|
|
/* 53 - reserved - was used by QCA, but not in use anymore */
|
2014-11-18 19:11:09 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DO_ACS = 54,
|
2014-12-06 01:48:23 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES = 55,
|
2015-02-11 03:48:39 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED = 56,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED = 57,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED = 58,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED = 59,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED = 60,
|
2016-12-08 14:28:42 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO = 61,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START = 62,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_MEMORY_DUMP = 63,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_ROAM = 64,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SSID_HOTLIST = 65,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_SSID_HOTLIST = 66,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_SSID_FOUND = 67,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_SSID_LOST = 68,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_PNO_SET_LIST = 69,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_PNO_SET_PASSPOINT_LIST = 70,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_PNO_RESET_PASSPOINT_LIST = 71,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_PNO_NETWORK_FOUND = 72,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_PNO_PASSPOINT_NETWORK_FOUND = 73,
|
2016-03-22 17:43:16 +01:00
|
|
|
/* Wi-Fi configuration subcommands */
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION = 74,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION = 75,
|
|
|
|
/* 76-90 - reserved for QCA */
|
2015-02-26 10:11:05 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DATA_OFFLOAD = 91,
|
2015-04-22 00:05:52 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG = 92,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME = 93,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT = 94,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT = 95,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER = 96,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DCC_GET_STATS = 97,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DCC_CLEAR_STATS = 98,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DCC_UPDATE_NDL = 99,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT = 100,
|
2015-05-06 13:25:10 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES = 101,
|
2015-07-17 02:45:41 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG = 102,
|
2015-07-21 22:11:43 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST = 103,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL = 104,
|
2015-07-27 12:14:22 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_SETBAND = 105,
|
2015-09-15 15:21:07 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN = 106,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE = 107,
|
2015-10-19 19:38:14 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_OTA_TEST = 108,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE = 109,
|
2015-10-26 23:02:50 +01:00
|
|
|
/* 110..114 - reserved for QCA */
|
2015-11-05 01:47:04 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB = 115,
|
2016-05-23 15:39:48 +02:00
|
|
|
/* 116..117 - reserved for QCA */
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG = 118,
|
2016-03-17 19:50:23 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_TSF = 119,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_WISA = 120,
|
2016-06-16 19:03:02 +02:00
|
|
|
/* 121 - reserved for QCA */
|
2016-06-24 02:32:09 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START = 122,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_STOP = 123,
|
2016-07-18 14:29:43 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH = 124,
|
2016-08-01 19:17:35 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GPIO_CONFIG_COMMAND = 125,
|
2016-08-10 15:49:46 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY = 126,
|
2016-09-05 10:22:38 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_EXT = 127,
|
2016-06-29 16:05:39 +02:00
|
|
|
/* FTM/indoor location subcommands */
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA = 128,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION = 129,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_FTM_ABORT_SESSION = 130,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT = 131,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE = 132,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER = 133,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS = 134,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_AOA_ABORT_MEAS = 135,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT = 136,
|
2016-09-21 09:37:32 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST = 137,
|
2016-09-20 09:38:16 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI = 138,
|
2016-09-26 23:09:36 +02:00
|
|
|
/* DMG low level RF sector operations */
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG = 139,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG = 140,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SELECTED_SECTOR = 141,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR = 142,
|
2016-10-25 12:50:46 +02:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS = 143,
|
2016-11-09 23:51:20 +01:00
|
|
|
/* 144 - reserved for QCA */
|
2016-11-22 16:20:08 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_ABORT_SCAN = 145,
|
2016-12-06 01:13:36 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS = 146,
|
2017-01-06 12:27:55 +01:00
|
|
|
QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS = 147,
|
2014-01-24 14:58:00 +01:00
|
|
|
};
|
|
|
|
|
2014-01-24 15:14:29 +01:00
|
|
|
|
2014-03-22 20:20:32 +01:00
|
|
|
enum qca_wlan_vendor_attr {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_INVALID = 0,
|
|
|
|
/* used by QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DFS = 1,
|
2014-04-01 20:13:49 +02:00
|
|
|
/* used by QCA_NL80211_VENDOR_SUBCMD_NAN */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_NAN = 2,
|
2014-04-17 18:54:30 +02:00
|
|
|
/* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_STATS_EXT = 3,
|
2014-06-03 20:52:31 +02:00
|
|
|
/* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_IFINDEX = 4,
|
2014-09-11 14:54:57 +02:00
|
|
|
/* used by QCA_NL80211_VENDOR_SUBCMD_ROAMING, u32 with values defined
|
|
|
|
* by enum qca_roaming_policy. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6,
|
2014-12-06 01:48:23 +01:00
|
|
|
/* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FEATURE_FLAGS = 7,
|
2015-02-09 16:26:54 +01:00
|
|
|
QCA_WLAN_VENDOR_ATTR_TEST = 8,
|
2015-07-21 22:11:43 +02:00
|
|
|
/* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */
|
|
|
|
/* Unsigned 32-bit value. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_CONCURRENCY_CAPA = 9,
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_2_4_BAND = 10,
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_5_0_BAND = 11,
|
2015-07-27 12:14:22 +02:00
|
|
|
/* Unsigned 32-bit value from enum qca_set_band. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE = 12,
|
2016-06-29 16:05:39 +02:00
|
|
|
/* Dummy (NOP) attribute for 64 bit padding */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PAD = 13,
|
|
|
|
/* Unique FTM session cookie (Unsigned 64 bit). Specified in
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION. Reported in
|
|
|
|
* the session in QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT and
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_SESSION_COOKIE = 14,
|
|
|
|
/* Indoor location capabilities, returned by
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_LOC_GET_CAPA.
|
|
|
|
* see enum qca_wlan_vendor_attr_loc_capa.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_CAPA = 15,
|
|
|
|
/* Array of nested attributes containing information about each peer
|
|
|
|
* in FTM measurement session. See enum qca_wlan_vendor_attr_peer_info
|
|
|
|
* for supported attributes for each peer.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEERS = 16,
|
|
|
|
/* Array of nested attributes containing measurement results for
|
|
|
|
* one or more peers, reported by the
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_FTM_MEAS_RESULT event.
|
|
|
|
* See enum qca_wlan_vendor_attr_peer_result for list of supported
|
|
|
|
* attributes.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PEER_RESULTS = 17,
|
|
|
|
/* Flag attribute for enabling or disabling responder functionality. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_RESPONDER_ENABLE = 18,
|
|
|
|
/* Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER
|
|
|
|
* command to specify the LCI report that will be sent by
|
|
|
|
* the responder during a measurement exchange. The format is
|
|
|
|
* defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.10.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_LCI = 19,
|
|
|
|
/* Used in the QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER
|
|
|
|
* command to specify the location civic report that will
|
|
|
|
* be sent by the responder during a measurement exchange.
|
|
|
|
* The format is defined in IEEE P802.11-REVmc/D7.0, 9.4.2.22.13.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_LCR = 20,
|
|
|
|
/* Session/measurement completion status code,
|
|
|
|
* reported in QCA_NL80211_VENDOR_SUBCMD_FTM_SESSION_DONE and
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT
|
|
|
|
* see enum qca_vendor_attr_loc_session_status.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS = 21,
|
|
|
|
/* Initial dialog token used by responder (0 if not specified),
|
|
|
|
* unsigned 8 bit value.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_INITIAL_TOKEN = 22,
|
|
|
|
/* AOA measurement type. Requested in QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS
|
|
|
|
* and optionally in QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION if
|
|
|
|
* AOA measurements are needed as part of an FTM session.
|
|
|
|
* Reported by QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT. See
|
|
|
|
* enum qca_wlan_vendor_attr_aoa_type.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_AOA_TYPE = 23,
|
|
|
|
/* A bit mask (unsigned 32 bit value) of antenna arrays used
|
|
|
|
* by indoor location measurements. Refers to the antenna
|
|
|
|
* arrays described by QCA_VENDOR_ATTR_LOC_CAPA_ANTENNA_ARRAYS.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_ANTENNA_ARRAY_MASK = 24,
|
|
|
|
/* AOA measurement data. Its contents depends on the AOA measurement
|
|
|
|
* type and antenna array mask:
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: array of U16 values,
|
|
|
|
* phase of the strongest CIR path for each antenna in the measured
|
|
|
|
* array(s).
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: array of 2 U16
|
|
|
|
* values, phase and amplitude of the strongest CIR path for each
|
|
|
|
* antenna in the measured array(s).
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT = 25,
|
2016-09-20 09:38:16 +02:00
|
|
|
/* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command
|
|
|
|
* to specify the chain number (unsigned 32 bit value) to inquire
|
|
|
|
* the corresponding antenna RSSI value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_CHAIN_INDEX = 26,
|
|
|
|
/* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command
|
|
|
|
* to report the specific antenna RSSI value (unsigned 32 bit value) */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_CHAIN_RSSI = 27,
|
2016-09-25 11:29:07 +02:00
|
|
|
/* Frequency in MHz, various uses. Unsigned 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FREQ = 28,
|
2016-09-26 23:09:36 +02:00
|
|
|
/* TSF timer value, unsigned 64 bit value.
|
|
|
|
* May be returned by various commands.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TSF = 29,
|
|
|
|
/* DMG RF sector index, unsigned 16 bit number. Valid values are
|
|
|
|
* 0..127 for sector indices or 65535 as special value used to
|
|
|
|
* unlock sector selection in
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_INDEX = 30,
|
|
|
|
/* DMG RF sector type, unsigned 8 bit value. One of the values
|
|
|
|
* in enum qca_wlan_vendor_attr_dmg_rf_sector_type.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE = 31,
|
|
|
|
/* Bitmask of DMG RF modules for which information is requested. Each
|
|
|
|
* bit corresponds to an RF module with the same index as the bit
|
|
|
|
* number. Unsigned 32 bit number but only low 8 bits can be set since
|
|
|
|
* all DMG chips currently have up to 8 RF modules.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_MODULE_MASK = 32,
|
|
|
|
/* Array of nested attributes where each entry is DMG RF sector
|
|
|
|
* configuration for a single RF module.
|
|
|
|
* Attributes for each entry are taken from enum
|
|
|
|
* qca_wlan_vendor_attr_dmg_rf_sector_cfg.
|
|
|
|
* Specified in QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG
|
|
|
|
* and returned by QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG = 33,
|
2016-10-26 15:20:46 +02:00
|
|
|
/* Used in QCA_NL80211_VENDOR_SUBCMD_STATS_EXT command
|
|
|
|
* to report frame aggregation statistics to userspace.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_NUM = 34,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_RX_AGGREGATION_STATS_HOLES_INFO = 35,
|
|
|
|
|
2014-03-22 20:20:32 +01:00
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
2014-09-11 14:54:57 +02:00
|
|
|
|
|
|
|
enum qca_roaming_policy {
|
|
|
|
QCA_ROAMING_NOT_ALLOWED,
|
|
|
|
QCA_ROAMING_ALLOWED_WITHIN_ESS,
|
|
|
|
};
|
|
|
|
|
2014-10-23 17:21:49 +02:00
|
|
|
enum qca_wlan_vendor_attr_roam_auth {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_INVALID = 0,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK,
|
2015-11-16 18:00:35 +01:00
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_SUBNET_STATUS,
|
2014-10-23 17:21:49 +02:00
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST - 1
|
|
|
|
};
|
|
|
|
|
2016-06-24 02:32:09 +02:00
|
|
|
enum qca_wlan_vendor_attr_p2p_listen_offload {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INVALID = 0,
|
|
|
|
/* A 32-bit unsigned value; the P2P listen frequency (MHz); must be one
|
|
|
|
* of the social channels.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CHANNEL,
|
|
|
|
/* A 32-bit unsigned value; the P2P listen offload period (ms).
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_PERIOD,
|
|
|
|
/* A 32-bit unsigned value; the P2P listen interval duration (ms).
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_INTERVAL,
|
|
|
|
/* A 32-bit unsigned value; number of interval times the firmware needs
|
|
|
|
* to run the offloaded P2P listen operation before it stops.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_COUNT,
|
|
|
|
/* An array of arbitrary binary data with one or more 8-byte values.
|
|
|
|
* The device types include both primary and secondary device types.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_DEVICE_TYPES,
|
|
|
|
/* An array of unsigned 8-bit characters; vendor information elements.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_VENDOR_IE,
|
|
|
|
/* A 32-bit unsigned value; a control flag to indicate whether listen
|
|
|
|
* results need to be flushed to wpa_supplicant.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_CTRL_FLAG,
|
|
|
|
/* A 8-bit unsigned value; reason code for P2P listen offload stop
|
|
|
|
* event.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_STOP_REASON,
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST - 1
|
|
|
|
};
|
|
|
|
|
2014-11-18 19:11:09 +01:00
|
|
|
enum qca_wlan_vendor_attr_acs_offload {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED,
|
2015-03-11 21:03:58 +01:00
|
|
|
QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL,
|
2015-06-20 02:19:27 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST,
|
2014-11-18 19:11:09 +01:00
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ACS_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST - 1
|
|
|
|
};
|
|
|
|
|
|
|
|
enum qca_wlan_vendor_acs_hw_mode {
|
|
|
|
QCA_ACS_MODE_IEEE80211B,
|
|
|
|
QCA_ACS_MODE_IEEE80211G,
|
|
|
|
QCA_ACS_MODE_IEEE80211A,
|
|
|
|
QCA_ACS_MODE_IEEE80211AD,
|
2015-05-08 19:53:08 +02:00
|
|
|
QCA_ACS_MODE_IEEE80211ANY,
|
2014-11-18 19:11:09 +01:00
|
|
|
};
|
|
|
|
|
2014-12-06 01:48:23 +01:00
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_features - Vendor device/driver feature flags
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD: Device supports key
|
|
|
|
* management offload, a mechanism where the station's firmware
|
|
|
|
* does the exchange with the AP to establish the temporal keys
|
|
|
|
* after roaming, rather than having the user space wpa_supplicant do it.
|
2015-05-08 19:53:08 +02:00
|
|
|
* @QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY: Device supports automatic
|
|
|
|
* band selection based on channel selection results.
|
2015-09-15 15:21:07 +02:00
|
|
|
* @QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS: Device supports
|
|
|
|
* simultaneous off-channel operations.
|
2016-06-24 02:32:09 +02:00
|
|
|
* @QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD: Device supports P2P
|
|
|
|
* Listen offload; a mechanism where the station's firmware takes care of
|
|
|
|
* responding to incoming Probe Request frames received from other P2P
|
|
|
|
* Devices whilst in Listen state, rather than having the user space
|
|
|
|
* wpa_supplicant do it. Information from received P2P requests are
|
|
|
|
* forwarded from firmware to host whenever the host processor wakes up.
|
2014-12-06 01:48:23 +01:00
|
|
|
* @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_features {
|
|
|
|
QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD = 0,
|
2015-05-08 19:53:08 +02:00
|
|
|
QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY = 1,
|
2015-09-15 15:21:07 +02:00
|
|
|
QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS = 2,
|
2016-06-24 02:32:09 +02:00
|
|
|
QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD = 3,
|
2014-12-06 01:48:23 +01:00
|
|
|
NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */
|
|
|
|
};
|
|
|
|
|
2015-02-26 10:11:05 +01:00
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_data_offload_ind - Vendor Data Offload Indication
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION: Session corresponding to
|
|
|
|
* the offloaded data.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL: Protocol of the offloaded
|
|
|
|
* data.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT: Event type for the data offload
|
|
|
|
* indication.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_data_offload_ind {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_INVALID = 0,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST - 1
|
|
|
|
};
|
2015-07-21 22:11:43 +02:00
|
|
|
|
|
|
|
enum qca_vendor_attr_get_preferred_freq_list {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID,
|
|
|
|
/* A 32-unsigned value; the interface type/mode for which the preferred
|
|
|
|
* frequency list is requested (see enum qca_iface_type for possible
|
|
|
|
* values); used in GET_PREFERRED_FREQ_LIST command from user-space to
|
|
|
|
* kernel and in the kernel response back to user-space.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE,
|
|
|
|
/* An array of 32-unsigned values; values are frequency (MHz); sent
|
|
|
|
* from kernel space to user space.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST,
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST - 1
|
|
|
|
};
|
|
|
|
|
|
|
|
enum qca_vendor_attr_probable_oper_channel {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID,
|
|
|
|
/* 32-bit unsigned value; indicates the connection/iface type likely to
|
|
|
|
* come on this channel (see enum qca_iface_type).
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE,
|
|
|
|
/* 32-bit unsigned value; the frequency (MHz) of the probable channel */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ,
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST - 1
|
|
|
|
};
|
|
|
|
|
|
|
|
enum qca_iface_type {
|
|
|
|
QCA_IFACE_TYPE_STA,
|
|
|
|
QCA_IFACE_TYPE_AP,
|
|
|
|
QCA_IFACE_TYPE_P2P_CLIENT,
|
|
|
|
QCA_IFACE_TYPE_P2P_GO,
|
|
|
|
QCA_IFACE_TYPE_IBSS,
|
|
|
|
QCA_IFACE_TYPE_TDLS,
|
|
|
|
};
|
|
|
|
|
2015-07-27 12:14:22 +02:00
|
|
|
enum qca_set_band {
|
|
|
|
QCA_SETBAND_AUTO,
|
|
|
|
QCA_SETBAND_5G,
|
|
|
|
QCA_SETBAND_2G,
|
|
|
|
};
|
|
|
|
|
2016-08-04 12:01:31 +02:00
|
|
|
/**
|
|
|
|
* enum qca_access_policy - Access control policy
|
|
|
|
*
|
|
|
|
* Access control policy is applied on the configured IE
|
|
|
|
* (QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE).
|
|
|
|
* To be set with QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY.
|
|
|
|
*
|
|
|
|
* @QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED: Deny Wi-Fi connections which match
|
|
|
|
* the specific configuration (IE) set, i.e., allow all the
|
|
|
|
* connections which do not match the configuration.
|
|
|
|
* @QCA_ACCESS_POLICY_DENY_UNLESS_LISTED: Accept Wi-Fi connections which match
|
|
|
|
* the specific configuration (IE) set, i.e., deny all the
|
|
|
|
* connections which do not match the configuration.
|
|
|
|
*/
|
|
|
|
enum qca_access_policy {
|
|
|
|
QCA_ACCESS_POLICY_ACCEPT_UNLESS_LISTED,
|
|
|
|
QCA_ACCESS_POLICY_DENY_UNLESS_LISTED,
|
|
|
|
};
|
|
|
|
|
2016-03-17 19:50:23 +01:00
|
|
|
/**
|
|
|
|
* enum qca_vendor_attr_get_tsf: Vendor attributes for TSF capture
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_TSF_CMD: enum qca_tsf_operation (u32)
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE: Unsigned 64 bit TSF timer value
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE: Unsigned 64 bit Synchronized
|
|
|
|
* SOC timer value at TSF capture
|
|
|
|
*/
|
|
|
|
enum qca_vendor_attr_tsf_cmd {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TSF_INVALID = 0,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TSF_CMD,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TSF_TIMER_VALUE,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TSF_SOC_TIMER_VALUE,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TSF_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TSF_AFTER_LAST - 1
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_tsf_operation: TSF driver commands
|
|
|
|
* @QCA_TSF_CAPTURE: Initiate TSF Capture
|
|
|
|
* @QCA_TSF_GET: Get TSF capture value
|
|
|
|
* @QCA_TSF_SYNC_GET: Initiate TSF capture and return with captured value
|
|
|
|
*/
|
|
|
|
enum qca_tsf_cmd {
|
|
|
|
QCA_TSF_CAPTURE,
|
|
|
|
QCA_TSF_GET,
|
|
|
|
QCA_TSF_SYNC_GET,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_vendor_attr_wisa_cmd
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_WISA_MODE: WISA mode value (u32)
|
|
|
|
* WISA setup vendor commands
|
|
|
|
*/
|
|
|
|
enum qca_vendor_attr_wisa_cmd {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WISA_INVALID = 0,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WISA_MODE,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WISA_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WISA_AFTER_LAST - 1
|
|
|
|
};
|
|
|
|
|
2015-06-17 18:24:29 +02:00
|
|
|
/* IEEE 802.11 Vendor Specific elements */
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_vendor_element_id - QCA Vendor Specific element types
|
|
|
|
*
|
|
|
|
* These values are used to identify QCA Vendor Specific elements. The
|
|
|
|
* payload of the element starts with the three octet OUI (OUI_QCA) and
|
|
|
|
* is followed by a single octet type which is defined by this enum.
|
|
|
|
*
|
|
|
|
* @QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST: P2P preferred channel list.
|
|
|
|
* This element can be used to specify preference order for supported
|
|
|
|
* channels. The channels in this list are in preference order (the first
|
|
|
|
* one has the highest preference) and are described as a pair of
|
|
|
|
* (global) Operating Class and Channel Number (each one octet) fields.
|
|
|
|
*
|
|
|
|
* This extends the standard P2P functionality by providing option to have
|
|
|
|
* more than one preferred operating channel. When this element is present,
|
|
|
|
* it replaces the preference indicated in the Operating Channel attribute.
|
|
|
|
* For supporting other implementations, the Operating Channel attribute is
|
|
|
|
* expected to be used with the highest preference channel. Similarly, all
|
|
|
|
* the channels included in this Preferred channel list element are
|
|
|
|
* expected to be included in the Channel List attribute.
|
|
|
|
*
|
|
|
|
* This vendor element may be included in GO Negotiation Request, P2P
|
|
|
|
* Invitation Request, and Provision Discovery Request frames.
|
2016-06-24 16:59:47 +02:00
|
|
|
*
|
|
|
|
* @QCA_VENDOR_ELEM_HE_CAPAB: HE Capabilities element.
|
|
|
|
* This element can be used for pre-standard publication testing of HE
|
|
|
|
* before P802.11ax draft assigns the element ID. The payload of this
|
|
|
|
* vendor specific element is defined by the latest P802.11ax draft.
|
|
|
|
* Please note that the draft is still work in progress and this element
|
|
|
|
* payload is subject to change.
|
|
|
|
*
|
|
|
|
* @QCA_VENDOR_ELEM_HE_OPER: HE Operation element.
|
|
|
|
* This element can be used for pre-standard publication testing of HE
|
|
|
|
* before P802.11ax draft assigns the element ID. The payload of this
|
|
|
|
* vendor specific element is defined by the latest P802.11ax draft.
|
|
|
|
* Please note that the draft is still work in progress and this element
|
|
|
|
* payload is subject to change.
|
2017-01-09 16:56:46 +01:00
|
|
|
*
|
|
|
|
* @QCA_VENDOR_ELEM_RAPS: RAPS element (OFDMA-based Random Access Parameter Set
|
|
|
|
* element).
|
|
|
|
* This element can be used for pre-standard publication testing of HE
|
|
|
|
* before P802.11ax draft assigns the element ID extension. The payload of
|
|
|
|
* this vendor specific element is defined by the latest P802.11ax draft
|
|
|
|
* (not including the Element ID Extension field). Please note that the
|
|
|
|
* draft is still work in progress and this element payload is subject to
|
|
|
|
* change.
|
|
|
|
*
|
|
|
|
* @QCA_VENDOR_ELEM_MU_EDCA_PARAMS: MU EDCA Parameter Set element.
|
|
|
|
* This element can be used for pre-standard publication testing of HE
|
|
|
|
* before P802.11ax draft assigns the element ID extension. The payload of
|
|
|
|
* this vendor specific element is defined by the latest P802.11ax draft
|
|
|
|
* (not including the Element ID Extension field). Please note that the
|
|
|
|
* draft is still work in progress and this element payload is subject to
|
|
|
|
* change.
|
|
|
|
*
|
|
|
|
* @QCA_VENDOR_ELEM_BSS_COLOR_CHANGE: BSS Color Change Announcement element.
|
|
|
|
* This element can be used for pre-standard publication testing of HE
|
|
|
|
* before P802.11ax draft assigns the element ID extension. The payload of
|
|
|
|
* this vendor specific element is defined by the latest P802.11ax draft
|
|
|
|
* (not including the Element ID Extension field). Please note that the
|
|
|
|
* draft is still work in progress and this element payload is subject to
|
|
|
|
* change.
|
2015-06-17 18:24:29 +02:00
|
|
|
*/
|
|
|
|
enum qca_vendor_element_id {
|
|
|
|
QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST = 0,
|
2016-06-24 16:59:47 +02:00
|
|
|
QCA_VENDOR_ELEM_HE_CAPAB = 1,
|
|
|
|
QCA_VENDOR_ELEM_HE_OPER = 2,
|
2017-01-09 16:56:46 +01:00
|
|
|
QCA_VENDOR_ELEM_RAPS = 3,
|
|
|
|
QCA_VENDOR_ELEM_MU_EDCA_PARAMS = 4,
|
|
|
|
QCA_VENDOR_ELEM_BSS_COLOR_CHANGE = 5,
|
2015-06-17 18:24:29 +02:00
|
|
|
};
|
|
|
|
|
2015-09-15 15:21:07 +02:00
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_scan - Specifies vendor scan attributes
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SCAN_IE: IEs that should be included as part of scan
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES: Nested unsigned 32-bit attributes
|
|
|
|
* with frequencies to be scanned (in MHz)
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS: Nested attribute with SSIDs to be scanned
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES: Nested array attribute of supported
|
|
|
|
* rates to be included
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE: flag used to send probe requests
|
|
|
|
* at non CCK rate in 2GHz band
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS: Unsigned 32-bit scan flags
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE: Unsigned 64-bit cookie provided by the
|
|
|
|
* driver for the specific scan request
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SCAN_STATUS: Unsigned 8-bit status of the scan
|
|
|
|
* request decoded as in enum scan_status
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SCAN_MAC: 6-byte MAC address to use when randomisation
|
|
|
|
* scan flag is set
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK: 6-byte MAC address mask to be used with
|
|
|
|
* randomisation
|
2016-12-05 12:21:20 +01:00
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SCAN_BSSID: 6-byte MAC address representing the
|
|
|
|
* specific BSSID to scan for.
|
2015-09-15 15:21:07 +02:00
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_scan {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SCAN_INVALID_PARAM = 0,
|
2016-12-05 12:21:20 +01:00
|
|
|
QCA_WLAN_VENDOR_ATTR_SCAN_IE = 1,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES = 2,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS = 3,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES = 4,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE = 5,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS = 6,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE = 7,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SCAN_STATUS = 8,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SCAN_MAC = 9,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK = 10,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SCAN_BSSID = 11,
|
2015-09-15 15:21:07 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SCAN_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST - 1
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum scan_status - Specifies the valid values the vendor scan attribute
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_SCAN_STATUS can take
|
|
|
|
*
|
|
|
|
* @VENDOR_SCAN_STATUS_NEW_RESULTS: implies the vendor scan is successful with
|
|
|
|
* new scan results
|
|
|
|
* @VENDOR_SCAN_STATUS_ABORTED: implies the vendor scan was aborted in-between
|
|
|
|
*/
|
|
|
|
enum scan_status {
|
|
|
|
VENDOR_SCAN_STATUS_NEW_RESULTS,
|
|
|
|
VENDOR_SCAN_STATUS_ABORTED,
|
|
|
|
VENDOR_SCAN_STATUS_MAX,
|
|
|
|
};
|
|
|
|
|
2015-10-19 19:38:14 +02:00
|
|
|
/**
|
|
|
|
* enum qca_vendor_attr_ota_test - Specifies the values for vendor
|
|
|
|
* command QCA_NL80211_VENDOR_SUBCMD_OTA_TEST
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE: enable ota test
|
|
|
|
*/
|
|
|
|
enum qca_vendor_attr_ota_test {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_OTA_TEST_INVALID,
|
|
|
|
/* 8-bit unsigned value to indicate if OTA test is enabled */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE,
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_OTA_TEST_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST - 1
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_vendor_attr_txpower_scale - vendor sub commands index
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE: scaling value
|
|
|
|
*/
|
|
|
|
enum qca_vendor_attr_txpower_scale {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_INVALID,
|
|
|
|
/* 8-bit unsigned value to indicate the scaling of tx power */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE,
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST - 1
|
|
|
|
};
|
|
|
|
|
2015-11-05 01:47:04 +01:00
|
|
|
/**
|
|
|
|
* enum qca_vendor_attr_txpower_decr_db - Attributes for TX power decrease
|
|
|
|
*
|
|
|
|
* These attributes are used with QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB.
|
|
|
|
*/
|
|
|
|
enum qca_vendor_attr_txpower_decr_db {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_INVALID,
|
|
|
|
/* 8-bit unsigned value to indicate the reduction of TX power in dB for
|
|
|
|
* a virtual interface. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB,
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST - 1
|
|
|
|
};
|
|
|
|
|
2016-03-22 17:43:16 +01:00
|
|
|
/* Attributes for data used by
|
2016-08-02 20:11:25 +02:00
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION and
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_CONFIGURATION subcommands.
|
2016-03-22 17:43:16 +01:00
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_config {
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_INVALID = 0,
|
2016-03-22 17:43:16 +01:00
|
|
|
/* Unsigned 32-bit value to set the DTIM period.
|
|
|
|
* Whether the wifi chipset wakes at every dtim beacon or a multiple of
|
|
|
|
* the DTIM period. If DTIM is set to 3, the STA shall wake up every 3
|
|
|
|
* DTIM beacons.
|
|
|
|
*/
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_DYNAMIC_DTIM = 1,
|
2016-03-22 17:43:16 +01:00
|
|
|
/* Unsigned 32-bit value to set the wifi_iface stats averaging factor
|
|
|
|
* used to calculate statistics like average the TSF offset or average
|
|
|
|
* number of frame leaked.
|
|
|
|
* For instance, upon Beacon frame reception:
|
|
|
|
* current_avg = ((beacon_TSF - TBTT) * factor + previous_avg * (0x10000 - factor) ) / 0x10000
|
|
|
|
* For instance, when evaluating leaky APs:
|
|
|
|
* current_avg = ((num frame received within guard time) * factor + previous_avg * (0x10000 - factor)) / 0x10000
|
|
|
|
*/
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_STATS_AVG_FACTOR = 2,
|
2016-03-22 17:43:16 +01:00
|
|
|
/* Unsigned 32-bit value to configure guard time, i.e., when
|
|
|
|
* implementing IEEE power management based on frame control PM bit, how
|
|
|
|
* long the driver waits before shutting down the radio and after
|
|
|
|
* receiving an ACK frame for a Data frame with PM bit set.
|
|
|
|
*/
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_GUARD_TIME = 3,
|
2016-03-22 17:43:16 +01:00
|
|
|
/* Unsigned 32-bit value to change the FTM capability dynamically */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_FINE_TIME_MEASUREMENT = 4,
|
2016-03-22 17:43:16 +01:00
|
|
|
/* Unsigned 16-bit value to configure maximum TX rate dynamically */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONF_TX_RATE = 5,
|
2016-03-22 17:43:16 +01:00
|
|
|
/* Unsigned 32-bit value to configure the number of continuous
|
|
|
|
* Beacon Miss which shall be used by the firmware to penalize
|
|
|
|
* the RSSI.
|
|
|
|
*/
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_PENALIZE_AFTER_NCONS_BEACON_MISS = 6,
|
2016-03-22 17:43:16 +01:00
|
|
|
/* Unsigned 8-bit value to configure the channel avoidance indication
|
|
|
|
* behavior. Firmware to send only one indication and ignore duplicate
|
|
|
|
* indications when set to avoid multiple Apps wakeups.
|
|
|
|
*/
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND = 7,
|
2016-03-22 17:43:16 +01:00
|
|
|
/* 8-bit unsigned value to configure the maximum TX MPDU for
|
|
|
|
* aggregation. */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION = 8,
|
2016-03-22 17:43:16 +01:00
|
|
|
/* 8-bit unsigned value to configure the maximum RX MPDU for
|
|
|
|
* aggregation. */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION = 9,
|
2016-06-30 04:59:21 +02:00
|
|
|
/* 8-bit unsigned value to configure the Non aggregrate/11g sw
|
|
|
|
* retry threshold (0 disable, 31 max). */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY = 10,
|
2016-06-30 04:59:21 +02:00
|
|
|
/* 8-bit unsigned value to configure the aggregrate sw
|
|
|
|
* retry threshold (0 disable, 31 max). */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY = 11,
|
2016-06-30 04:59:21 +02:00
|
|
|
/* 8-bit unsigned value to configure the MGMT frame
|
|
|
|
* retry threshold (0 disable, 31 max). */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY = 12,
|
2016-06-30 04:59:21 +02:00
|
|
|
/* 8-bit unsigned value to configure the CTRL frame
|
|
|
|
* retry threshold (0 disable, 31 max). */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY = 13,
|
2016-06-30 04:59:21 +02:00
|
|
|
/* 8-bit unsigned value to configure the propagation delay for
|
|
|
|
* 2G/5G band (0~63, units in us) */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY = 14,
|
2016-07-22 17:22:29 +02:00
|
|
|
/* Unsigned 32-bit value to configure the number of unicast TX fail
|
|
|
|
* packet count. The peer is disconnected once this threshold is
|
|
|
|
* reached. */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT = 15,
|
2016-08-02 18:45:56 +02:00
|
|
|
/* Attribute used to set scan default IEs to the driver.
|
|
|
|
*
|
|
|
|
* These IEs can be used by scan operations that will be initiated by
|
|
|
|
* the driver/firmware.
|
|
|
|
*
|
|
|
|
* For further scan requests coming to the driver, these IEs should be
|
|
|
|
* merged with the IEs received along with scan request coming to the
|
|
|
|
* driver. If a particular IE is present in the scan default IEs but not
|
|
|
|
* present in the scan request, then that IE should be added to the IEs
|
|
|
|
* sent in the Probe Request frames for that scan request. */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES = 16,
|
2016-08-01 19:00:39 +02:00
|
|
|
/* Unsigned 32-bit attribute for generic commands */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND = 17,
|
2016-08-01 19:00:39 +02:00
|
|
|
/* Unsigned 32-bit value attribute for generic commands */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_VALUE = 18,
|
2016-08-01 19:00:39 +02:00
|
|
|
/* Unsigned 32-bit data attribute for generic command response */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA = 19,
|
2016-08-01 19:00:39 +02:00
|
|
|
/* Unsigned 32-bit length attribute for
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH = 20,
|
2016-08-01 19:00:39 +02:00
|
|
|
/* Unsigned 32-bit flags attribute for
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS = 21,
|
2016-08-04 12:01:31 +02:00
|
|
|
/* Unsigned 32-bit, defining the access policy.
|
|
|
|
* See enum qca_access_policy. Used with
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST. */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY = 22,
|
2016-08-04 12:01:31 +02:00
|
|
|
/* Sets the list of full set of IEs for which a specific access policy
|
|
|
|
* has to be applied. Used along with
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY to control the access.
|
|
|
|
* Zero length payload can be used to clear this access constraint. */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST = 23,
|
2016-08-04 18:52:21 +02:00
|
|
|
/* Unsigned 32-bit, specifies the interface index (netdev) for which the
|
|
|
|
* corresponding configurations are applied. If the interface index is
|
|
|
|
* not specified, the configurations are attributed to the respective
|
|
|
|
* wiphy. */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX = 24,
|
2016-08-09 06:58:35 +02:00
|
|
|
/* 8-bit unsigned value to trigger QPower: 1-Enable, 0-Disable */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER = 25,
|
2016-09-23 15:33:42 +02:00
|
|
|
/* 8-bit unsigned value to configure the driver and below layers to
|
|
|
|
* ignore the assoc disallowed set by APs while connecting
|
|
|
|
* 1-Ignore, 0-Don't ignore */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_IGNORE_ASSOC_DISALLOWED = 26,
|
2016-09-20 09:38:16 +02:00
|
|
|
/* 32-bit unsigned value to trigger antenna diversity features:
|
|
|
|
* 1-Enable, 0-Disable */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ENA = 27,
|
2016-09-20 09:38:16 +02:00
|
|
|
/* 32-bit unsigned value to configure specific chain antenna */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_CHAIN = 28,
|
2016-09-20 09:38:16 +02:00
|
|
|
/* 32-bit unsigned value to trigger cycle selftest
|
|
|
|
* 1-Enable, 0-Disable */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST = 29,
|
2016-09-20 09:38:16 +02:00
|
|
|
/* 32-bit unsigned to configure the cycle time of selftest
|
|
|
|
* the unit is micro-second */
|
2016-09-30 12:30:31 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST_INTVL = 30,
|
2016-10-26 15:20:46 +02:00
|
|
|
/* 32-bit unsigned value to set reorder timeout for AC_VO */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VOICE = 31,
|
|
|
|
/* 32-bit unsigned value to set reorder timeout for AC_VI */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VIDEO = 32,
|
|
|
|
/* 32-bit unsigned value to set reorder timeout for AC_BE */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_BESTEFFORT = 33,
|
|
|
|
/* 32-bit unsigned value to set reorder timeout for AC_BK */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_BACKGROUND = 34,
|
|
|
|
/* 6-byte MAC address to point out the specific peer */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_PEER_MAC = 35,
|
|
|
|
/* 32-bit unsigned value to set window size for specific peer */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_BLOCKSIZE_WINLIMIT = 36,
|
2016-12-09 13:08:26 +01:00
|
|
|
/* 8-bit unsigned value to set the beacon miss threshold in 2.4 GHz */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_MISS_THRESHOLD_24 = 37,
|
|
|
|
/* 8-bit unsigned value to set the beacon miss threshold in 5 GHz */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_MISS_THRESHOLD_5 = 38,
|
2016-03-22 17:43:16 +01:00
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
2016-05-23 15:39:48 +02:00
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_sap_config - Parameters for AP configuration
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_sap_config {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_INVALID = 0,
|
|
|
|
/* 1 - reserved for QCA */
|
|
|
|
/* List of frequencies on which AP is expected to operate.
|
|
|
|
* This is irrespective of ACS configuration. This list is a priority
|
|
|
|
* based one and is looked for before the AP is created to ensure the
|
|
|
|
* best concurrency sessions (avoid MCC and use DBS/SCC) co-exist in
|
|
|
|
* the system.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAP_MANDATORY_FREQUENCY_LIST = 2,
|
|
|
|
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
2016-07-18 14:29:43 +02:00
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_sap_conditional_chan_switch - Parameters for AP
|
|
|
|
* conditional channel switch
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_sap_conditional_chan_switch {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID = 0,
|
|
|
|
/* Priority based frequency list (an array of u32 values in host byte
|
|
|
|
* order) */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST = 1,
|
|
|
|
/* Status of the conditional switch (u32).
|
|
|
|
* 0: Success, Non-zero: Failure
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_STATUS = 2,
|
|
|
|
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
2016-08-01 19:17:35 +02:00
|
|
|
/**
|
|
|
|
* enum qca_wlan_gpio_attr - Parameters for GPIO configuration
|
|
|
|
*/
|
|
|
|
enum qca_wlan_gpio_attr {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INVALID = 0,
|
|
|
|
/* Unsigned 32-bit attribute for GPIO command */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_COMMAND,
|
|
|
|
/* Unsigned 32-bit attribute for GPIO PIN number to configure */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PINNUM,
|
|
|
|
/* Unsigned 32-bit attribute for GPIO value to configure */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_VALUE,
|
|
|
|
/* Unsigned 32-bit attribute for GPIO pull type */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_PULL_TYPE,
|
|
|
|
/* Unsigned 32-bit attribute for GPIO interrupt mode */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_INTR_MODE,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GPIO_PARAM_LAST - 1
|
|
|
|
};
|
|
|
|
|
2016-08-10 15:49:46 +02:00
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_get_hw_capability - Wi-Fi hardware capability
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_get_hw_capability {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_INVALID,
|
|
|
|
/* Antenna isolation
|
|
|
|
* An attribute used in the response.
|
|
|
|
* The content of this attribute is encoded in a byte array. Each byte
|
|
|
|
* value is an antenna isolation value. The array length is the number
|
|
|
|
* of antennas.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION,
|
|
|
|
/* Request HW capability
|
|
|
|
* An attribute used in the request.
|
|
|
|
* The content of this attribute is a u32 array for one or more of
|
|
|
|
* hardware capabilities (attribute IDs) that are being requested. Each
|
|
|
|
* u32 value has a value from this
|
|
|
|
* enum qca_wlan_vendor_attr_get_hw_capability
|
|
|
|
* identifying which capabilities are requested.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GET_HW_CAPABILITY,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_HW_CAPABILITY_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
2016-09-05 10:22:38 +02:00
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_ll_stats_ext - Attributes for MAC layer monitoring
|
|
|
|
* offload which is an extension for LL_STATS.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD: Monitoring period. Unit in ms.
|
|
|
|
* If MAC counters do not exceed the threshold, FW will report monitored
|
|
|
|
* link layer counters periodically as this setting. The first report is
|
|
|
|
* always triggered by this timer.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD: It is a percentage (1-99).
|
|
|
|
* For each MAC layer counter, FW holds two copies. One is the current value.
|
|
|
|
* The other is the last report. Once a current counter's increment is larger
|
|
|
|
* than the threshold, FW will indicate that counter to host even if the
|
|
|
|
* monitoring timer does not expire.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG: Peer STA power state change
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID: TID of MSDU
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU: Count of MSDU with the same
|
|
|
|
* failure code.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS: TX failure code
|
|
|
|
* 1: TX packet discarded
|
|
|
|
* 2: No ACK
|
|
|
|
* 3: Postpone
|
2016-09-21 11:23:08 +02:00
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS: peer MAC address
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE: Peer STA current state
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL: Global threshold.
|
|
|
|
* Threshold for all monitored parameters. If per counter dedicated threshold
|
|
|
|
* is not enabled, this threshold will take effect.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE: Indicate what triggers this
|
|
|
|
* event, PERORID_TIMEOUT == 1, THRESH_EXCEED == 0.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID: interface ID
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID: peer ID
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP: bitmap for TX counters
|
|
|
|
* Bit0: TX counter unit in MSDU
|
|
|
|
* Bit1: TX counter unit in MPDU
|
|
|
|
* Bit2: TX counter unit in PPDU
|
|
|
|
* Bit3: TX counter unit in byte
|
|
|
|
* Bit4: Dropped MSDUs
|
|
|
|
* Bit5: Dropped Bytes
|
|
|
|
* Bit6: MPDU retry counter
|
|
|
|
* Bit7: MPDU failure counter
|
|
|
|
* Bit8: PPDU failure counter
|
|
|
|
* Bit9: MPDU aggregation counter
|
|
|
|
* Bit10: MCS counter for ACKed MPDUs
|
|
|
|
* Bit11: MCS counter for Failed MPDUs
|
|
|
|
* Bit12: TX Delay counter
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP: bitmap for RX counters
|
|
|
|
* Bit0: MAC RX counter unit in MPDU
|
|
|
|
* Bit1: MAC RX counter unit in byte
|
|
|
|
* Bit2: PHY RX counter unit in PPDU
|
|
|
|
* Bit3: PHY RX counter unit in byte
|
|
|
|
* Bit4: Disorder counter
|
|
|
|
* Bit5: Retry counter
|
|
|
|
* Bit6: Duplication counter
|
|
|
|
* Bit7: Discard counter
|
|
|
|
* Bit8: MPDU aggregation size counter
|
|
|
|
* Bit9: MCS counter
|
|
|
|
* Bit10: Peer STA power state change (wake to sleep) counter
|
|
|
|
* Bit11: Peer STA power save counter, total time in PS mode
|
|
|
|
* Bit12: Probe request counter
|
|
|
|
* Bit13: Other management frames counter
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP: bitmap for CCA
|
|
|
|
* Bit0: Idle time
|
|
|
|
* Bit1: TX time
|
|
|
|
* Bit2: time RX in current bss
|
|
|
|
* Bit3: Out of current bss time
|
|
|
|
* Bit4: Wireless medium busy time
|
|
|
|
* Bit5: RX in bad condition time
|
|
|
|
* Bit6: TX in bad condition time
|
|
|
|
* Bit7: time wlan card not available
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP: bitmap for signal
|
|
|
|
* Bit0: Per channel SNR counter
|
|
|
|
* Bit1: Per channel noise floor counter
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM: number of peers
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM: number of channels
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_AC_RX_NUM: number of RX stats
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS: per channel BSS CCA stats
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER: container for per PEER stats
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU: Number of total TX MSDUs
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU: Number of total TX MPDUs
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU: Number of total TX PPDUs
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES: bytes of TX data
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP: Number of dropped TX packets
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES: Bytes dropped
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY: waiting time without an ACK
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK: number of MPDU not-ACKed
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK: number of PPDU not-ACKed
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM:
|
|
|
|
* aggregation stats buffer length
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM: length of mcs stats
|
|
|
|
* buffer for ACKed MPDUs.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM: length of mcs stats
|
|
|
|
* buffer for failed MPDUs.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE:
|
|
|
|
* length of delay stats array.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR: TX aggregation stats
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS: MCS stats for ACKed MPDUs
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS: MCS stats for failed MPDUs
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY: tx delay stats
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU: MPDUs received
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES: bytes received
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU: PPDU received
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES: PPDU bytes received
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST: packets lost
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY: number of RX packets
|
|
|
|
* flagged as retransmissions
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP: number of RX packets
|
|
|
|
* flagged as duplicated
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD: number of RX
|
|
|
|
* packets discarded
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM: length of RX aggregation
|
|
|
|
* stats buffer.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM: length of RX mcs
|
|
|
|
* stats buffer.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS: RX mcs stats buffer
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR: aggregation stats buffer
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES: times STAs go to sleep
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION: STAs' total sleep time
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ: number of probe
|
|
|
|
* requests received
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT: number of other mgmt
|
|
|
|
* frames received
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME: Percentage of idle time
|
|
|
|
* there is no TX, nor RX, nor interference.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME: percentage of time
|
|
|
|
* transmitting packets.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME: percentage of time
|
|
|
|
* for receiving.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY: percentage of time
|
|
|
|
* interference detected.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD: percentage of time
|
|
|
|
* receiving packets with errors.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD: percentage of time
|
|
|
|
* TX no-ACK.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL: percentage of time
|
|
|
|
* the chip is unable to work in normal conditions.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME: percentage of time
|
|
|
|
* receiving packets in current BSS.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME: percentage of time
|
|
|
|
* receiving packets not in current BSS.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM: number of antennas
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL:
|
|
|
|
* This is a container for per antenna signal stats.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR: per antenna SNR value
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF: per antenna NF value
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON: RSSI of beacon
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON: SNR of beacon
|
2016-09-05 10:22:38 +02:00
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_ll_stats_ext {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_INVALID = 0,
|
|
|
|
|
|
|
|
/* Attributes for configurations */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_PERIOD,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CFG_THRESHOLD,
|
|
|
|
|
2016-09-21 11:23:08 +02:00
|
|
|
/* Peer STA power state change */
|
2016-09-05 10:22:38 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_CHG,
|
|
|
|
|
|
|
|
/* TX failure event */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TID,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NUM_MSDU,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_STATUS,
|
|
|
|
|
2016-09-21 11:23:08 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_STATE,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_MAC_ADDRESS,
|
|
|
|
|
|
|
|
/* MAC counters */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_GLOBAL,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_EVENT_MODE,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_ID,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ID,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BITMAP,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BITMAP,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS_BITMAP,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_SIGNAL_BITMAP,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_NUM,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CHANNEL_NUM,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_CCA_BSS,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER,
|
|
|
|
|
|
|
|
/* Sub-attributes for PEER_AC_TX */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MSDU,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_MPDU,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_PPDU,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BYTES,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DROP_BYTES,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_RETRY,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_ACK,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_NO_BACK,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR_NUM,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS_NUM,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS_NUM,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_AGGR,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_SUCC_MCS,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_FAIL_MCS,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_DELAY_ARRAY_SIZE,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_DELAY,
|
|
|
|
|
|
|
|
/* Sub-attributes for PEER_AC_RX */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_BYTES,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PPDU_BYTES,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_LOST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_RETRY,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DUP,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MPDU_DISCARD,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR_NUM,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS_NUM,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MCS,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_AGGR,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_TIMES,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_PS_DURATION,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_PROBE_REQ,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_MGMT,
|
|
|
|
|
|
|
|
/* Sub-attributes for CCA_BSS */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IDLE_TIME,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_TIME,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_TIME,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BUSY,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_RX_BAD,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_TX_BAD,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_NO_AVAIL,
|
|
|
|
|
|
|
|
/* sub-attribute for BSS_RX_TIME */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IN_BSS_TIME,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_OUT_BSS_TIME,
|
|
|
|
|
|
|
|
/* Sub-attributes for PEER_SIGNAL */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_ANT_NUM,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_PEER_SIGNAL,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_SNR,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_ANT_NF,
|
|
|
|
|
|
|
|
/* Sub-attributes for IFACE_BSS */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_RSSI_BEACON,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_IFACE_SNR_BEACON,
|
|
|
|
|
2016-09-05 10:22:38 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_LAST - 1
|
|
|
|
};
|
|
|
|
|
2016-06-29 16:05:39 +02:00
|
|
|
/* Attributes for FTM commands and events */
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_loc_capa - Indoor location capabilities
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS: Various flags. See
|
|
|
|
* enum qca_wlan_vendor_attr_loc_capa_flags.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS: Maximum number
|
|
|
|
* of measurement sessions that can run concurrently.
|
|
|
|
* Default is one session (no session concurrency).
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS: The total number of unique
|
|
|
|
* peers that are supported in running sessions. For example,
|
|
|
|
* if the value is 8 and maximum number of sessions is 2, you can
|
|
|
|
* have one session with 8 unique peers, or 2 sessions with 4 unique
|
|
|
|
* peers each, and so on.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP: Maximum number
|
|
|
|
* of bursts per peer, as an exponent (2^value). Default is 0,
|
|
|
|
* meaning no multi-burst support.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST: Maximum number
|
|
|
|
* of measurement exchanges allowed in a single burst.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES: Supported AOA measurement
|
|
|
|
* types. A bit mask (unsigned 32 bit value), each bit corresponds
|
|
|
|
* to an AOA type as defined by enum qca_vendor_attr_aoa_type.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_loc_capa {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_INVALID,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAGS,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_SESSIONS,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_PEERS,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_NUM_BURSTS_EXP,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_CAPA_MAX_MEAS_PER_BURST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_AOA_CAPA_SUPPORTED_TYPES,
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_loc_capa_flags: Indoor location capability flags
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER: Set if driver
|
|
|
|
* can be configured as an FTM responder (for example, an AP that
|
|
|
|
* services FTM requests). QCA_NL80211_VENDOR_SUBCMD_FTM_CFG_RESPONDER
|
|
|
|
* will be supported if set.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR: Set if driver
|
|
|
|
* can run FTM sessions. QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION
|
|
|
|
* will be supported if set.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP: Set if FTM responder
|
|
|
|
* supports immediate (ASAP) response.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA: Set if driver supports standalone
|
|
|
|
* AOA measurement using QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM: Set if driver supports
|
|
|
|
* requesting AOA measurements as part of an FTM session.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_loc_capa_flags {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_RESPONDER = 1 << 0,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR = 1 << 1,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP = 1 << 2,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA = 1 << 3,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA_IN_FTM = 1 << 4,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_ftm_peer_info: Information about
|
|
|
|
* a single peer in a measurement session.
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR: The MAC address of the peer.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS: Various flags related
|
|
|
|
* to measurement. See enum qca_wlan_vendor_attr_ftm_peer_meas_flags.
|
2016-09-06 15:16:42 +02:00
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS: Nested attribute of
|
2016-06-29 16:05:39 +02:00
|
|
|
* FTM measurement parameters, as specified by IEEE P802.11-REVmc/D7.0
|
|
|
|
* 9.4.2.167. See enum qca_wlan_vendor_attr_ftm_meas_param for
|
|
|
|
* list of supported attributes.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID: Initial token ID for
|
|
|
|
* secure measurement.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD: Request AOA
|
|
|
|
* measurement every <value> bursts. If 0 or not specified,
|
|
|
|
* AOA measurements will be disabled for this peer.
|
2016-09-25 11:29:07 +02:00
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ: Frequency in MHz where
|
|
|
|
* the measurement frames are exchanged. Optional; if not
|
|
|
|
* specified, try to locate the peer in the kernel scan
|
|
|
|
* results cache and use frequency from there.
|
2016-06-29 16:05:39 +02:00
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_ftm_peer_info {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_INVALID,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAC_ADDR,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAGS,
|
2016-09-06 15:16:42 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_PARAMS,
|
2016-06-29 16:05:39 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_AOA_BURST_PERIOD,
|
2016-09-25 11:29:07 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_FREQ,
|
2016-06-29 16:05:39 +02:00
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_ftm_peer_meas_flags: Measurement request flags,
|
|
|
|
* per-peer
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP: If set, request
|
|
|
|
* immediate (ASAP) response from peer.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI: If set, request
|
|
|
|
* LCI report from peer. The LCI report includes the absolute
|
|
|
|
* location of the peer in "official" coordinates (similar to GPS).
|
|
|
|
* See IEEE P802.11-REVmc/D7.0, 11.24.6.7 for more information.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR: If set, request
|
|
|
|
* Location civic report from peer. The LCR includes the location
|
|
|
|
* of the peer in free-form format. See IEEE P802.11-REVmc/D7.0,
|
|
|
|
* 11.24.6.7 for more information.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE: If set,
|
|
|
|
* request a secure measurement.
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_FTM_PEER_SECURE_TOKEN_ID must also be provided.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_ftm_peer_meas_flags {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_ASAP = 1 << 0,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCI = 1 << 1,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_LCR = 1 << 2,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_MEAS_FLAG_SECURE = 1 << 3,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_ftm_meas_param: Measurement parameters
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST: Number of measurements
|
|
|
|
* to perform in a single burst.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP: Number of bursts to
|
|
|
|
* perform, specified as an exponent (2^value).
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION: Duration of burst
|
|
|
|
* instance, as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD: Time between bursts,
|
|
|
|
* as specified in IEEE P802.11-REVmc/D7.0, 9.4.2.167. Must
|
|
|
|
* be larger than QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_ftm_meas_param {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_INVALID,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MEAS_PER_BURST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_NUM_BURSTS_EXP,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_DURATION,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_BURST_PERIOD,
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PARAM_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_ftm_peer_result: Per-peer results
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR: MAC address of the reported
|
|
|
|
* peer.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS: Status of measurement
|
|
|
|
* request for this peer.
|
|
|
|
* See enum qca_wlan_vendor_attr_ftm_peer_result_status.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS: Various flags related
|
|
|
|
* to measurement results for this peer.
|
|
|
|
* See enum qca_wlan_vendor_attr_ftm_peer_result_flags.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS: Specified when
|
|
|
|
* request failed and peer requested not to send an additional request
|
|
|
|
* for this number of seconds.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI: LCI report when received
|
|
|
|
* from peer. In the format specified by IEEE P802.11-REVmc/D7.0,
|
|
|
|
* 9.4.2.22.10.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR: Location civic report when
|
|
|
|
* received from peer. In the format specified by IEEE P802.11-REVmc/D7.0,
|
|
|
|
* 9.4.2.22.13.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS: Reported when peer
|
|
|
|
* overridden some measurement request parameters. See
|
|
|
|
* enum qca_wlan_vendor_attr_ftm_meas_param.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS: AOA measurement
|
|
|
|
* for this peer. Same contents as @QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS: Array of measurement
|
|
|
|
* results. Each entry is a nested attribute defined
|
|
|
|
* by enum qca_wlan_vendor_attr_ftm_meas.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_ftm_peer_result {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_INVALID,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAC_ADDR,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAGS,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCI,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_LCR,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAMS,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AOA_MEAS,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS,
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_ftm_peer_result_status
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK: Request sent ok and results
|
|
|
|
* will be provided. Peer may have overridden some measurement parameters,
|
|
|
|
* in which case overridden parameters will be report by
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_MEAS_PARAM attribute.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE: Peer is incapable
|
|
|
|
* of performing the measurement request. No more results will be sent
|
|
|
|
* for this peer in this session.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED: Peer reported request
|
|
|
|
* failed, and requested not to send an additional request for number
|
|
|
|
* of seconds specified by QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_VALUE_SECONDS
|
|
|
|
* attribute.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID: Request validation
|
|
|
|
* failed. Request was not sent over the air.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_ftm_peer_result_status {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_OK,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INCAPABLE,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_FAILED,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_STATUS_INVALID,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_ftm_peer_result_flags: Various flags
|
|
|
|
* for measurement result, per-peer
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE: If set,
|
|
|
|
* measurement completed for this peer. No more results will be reported
|
|
|
|
* for this peer in this session.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_ftm_peer_result_flags {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_PEER_RES_FLAG_DONE = 1 << 0,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_vendor_attr_loc_session_status: Session completion status code
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK: Session completed
|
|
|
|
* successfully.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED: Session aborted
|
|
|
|
* by request.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID: Session request
|
|
|
|
* was invalid and was not started.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED: Session had an error
|
|
|
|
* and did not complete normally (for example out of resources).
|
|
|
|
*/
|
|
|
|
enum qca_vendor_attr_loc_session_status {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_OK,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_ABORTED,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_INVALID,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOC_SESSION_STATUS_FAILED,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_ftm_meas: Single measurement data
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1: Time of departure (TOD) of FTM packet as
|
|
|
|
* recorded by responder, in picoseconds.
|
|
|
|
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2: Time of arrival (TOA) of FTM packet at
|
|
|
|
* initiator, in picoseconds.
|
|
|
|
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3: TOD of ACK packet as recorded by
|
|
|
|
* initiator, in picoseconds.
|
|
|
|
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4: TOA of ACK packet at
|
|
|
|
* responder, in picoseconds.
|
|
|
|
* See IEEE P802.11-REVmc/D7.0, 11.24.6.4 for more information.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI: RSSI (signal level) as recorded
|
|
|
|
* during this measurement exchange. Optional and will be provided if
|
|
|
|
* the hardware can measure it.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR: TOD error reported by
|
|
|
|
* responder. Not always provided.
|
|
|
|
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR: TOA error reported by
|
|
|
|
* responder. Not always provided.
|
|
|
|
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR: TOD error measured by
|
|
|
|
* initiator. Not always provided.
|
|
|
|
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR: TOA error measured by
|
|
|
|
* initiator. Not always provided.
|
|
|
|
* See IEEE P802.11-REVmc/D7.0, 9.6.8.33 for more information.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD: Dummy attribute for padding.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_ftm_meas {
|
2016-09-06 15:16:42 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INVALID,
|
2016-06-29 16:05:39 +02:00
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T1,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T2,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T3,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_T4,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_RSSI,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOD_ERR,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_TOA_ERR,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOD_ERR,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_INITIATOR_TOA_ERR,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_PAD,
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_FTM_MEAS_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_aoa_type - AOA measurement type
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE: Phase of the strongest
|
|
|
|
* CIR (channel impulse response) path for each antenna.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP: Phase and amplitude
|
|
|
|
* of the strongest CIR path for each antenna.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_aoa_type {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_AOA_TYPE_TOP_CIR_PHASE_AMP,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_AOA_TYPE_MAX
|
|
|
|
};
|
|
|
|
|
2016-09-21 09:37:32 +02:00
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_encryption_test - Attributes to
|
|
|
|
* validate encryption engine
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION: Flag attribute.
|
|
|
|
* This will be included if the request is for decryption; if not included,
|
|
|
|
* the request is treated as a request for encryption by default.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER: Unsigned 32-bit value
|
|
|
|
* indicating the key cipher suite. Takes same values as
|
|
|
|
* NL80211_ATTR_KEY_CIPHER.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID: Unsigned 8-bit value
|
|
|
|
* Key Id to be used for encryption
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK: Array of 8-bit values.
|
|
|
|
* Key (TK) to be used for encryption/decryption
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN: Array of 8-bit values.
|
|
|
|
* Packet number to be specified for encryption/decryption
|
|
|
|
* 6 bytes for TKIP/CCMP/GCMP.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA: Array of 8-bit values
|
|
|
|
* representing the 802.11 packet (header + payload + FCS) that
|
|
|
|
* needs to be encrypted/decrypted.
|
|
|
|
* Encrypted/decrypted response from the driver will also be sent
|
|
|
|
* to userspace with the same attribute.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_encryption_test {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_INVALID = 0,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_NEEDS_DECRYPTION,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_CIPHER,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_KEYID,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_TK,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_PN,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_DATA,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST - 1
|
|
|
|
};
|
|
|
|
|
2016-09-26 23:09:36 +02:00
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_dmg_rf_sector_type - Type of
|
|
|
|
* sector for DMG RF sector operations.
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_RX: RX sector
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_TX: TX sector
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_dmg_rf_sector_type {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_RX,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_TX,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_TYPE_MAX
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_dmg_rf_sector_cfg - Attributes for
|
|
|
|
* DMG RF sector configuration for a single RF module.
|
|
|
|
* The values are defined in a compact way which closely matches
|
|
|
|
* the way it is stored in HW registers.
|
|
|
|
* The configuration provides values for 32 antennas and 8 distribution
|
|
|
|
* amplifiers, and together describes the characteristics of the RF
|
|
|
|
* sector - such as a beam in some direction with some gain.
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX: Index
|
|
|
|
* of RF module for this configuration.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE0: Bit 0 of edge
|
|
|
|
* amplifier gain index. Unsigned 32 bit number containing
|
|
|
|
* bits for all 32 antennas.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE1: Bit 1 of edge
|
|
|
|
* amplifier gain index. Unsigned 32 bit number containing
|
|
|
|
* bits for all 32 antennas.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE2: Bit 2 of edge
|
|
|
|
* amplifier gain index. Unsigned 32 bit number containing
|
|
|
|
* bits for all 32 antennas.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_HI: Phase values
|
|
|
|
* for first 16 antennas, 2 bits per antenna.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_LO: Phase values
|
|
|
|
* for last 16 antennas, 2 bits per antenna.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16: Contains
|
|
|
|
* DTYPE values (3 bits) for each distribution amplifier, followed
|
|
|
|
* by X16 switch bits for each distribution amplifier. There are
|
|
|
|
* total of 8 distribution amplifiers.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_dmg_rf_sector_cfg {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_INVALID = 0,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX = 1,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE0 = 2,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE1 = 3,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_ETYPE2 = 4,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_HI = 5,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_PSH_LO = 6,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16 = 7,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST - 1
|
|
|
|
};
|
|
|
|
|
2016-10-17 09:27:53 +02:00
|
|
|
enum qca_wlan_vendor_attr_ll_stats_set {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_INVALID = 0,
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_MPDU_SIZE_THRESHOLD = 1,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_CONFIG_AGGRESSIVE_STATS_GATHERING = 2,
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_SET_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum qca_wlan_vendor_attr_ll_stats_clr {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_INVALID = 0,
|
|
|
|
/* Unsigned 32bit bitmap for clearing statistics
|
|
|
|
* All radio statistics 0x00000001
|
|
|
|
* cca_busy_time (within radio statistics) 0x00000002
|
|
|
|
* All channel stats (within radio statistics) 0x00000004
|
|
|
|
* All scan statistics (within radio statistics) 0x00000008
|
|
|
|
* All interface statistics 0x00000010
|
|
|
|
* All tx rate statistics (within interface statistics) 0x00000020
|
|
|
|
* All ac statistics (with in interface statistics) 0x00000040
|
|
|
|
* All contention (min, max, avg) statistics (within ac statisctics)
|
|
|
|
* 0x00000080.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_REQ_MASK = 1,
|
|
|
|
/* Unsigned 8 bit value: Request to stop statistics collection */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_REQ = 2,
|
|
|
|
|
|
|
|
/* Unsigned 32 bit bitmap: Response from the driver
|
|
|
|
* for the cleared statistics
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_RSP_MASK = 3,
|
|
|
|
/* Unsigned 8 bit value: Response from driver/firmware
|
|
|
|
* for the stop request
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_CONFIG_STOP_RSP = 4,
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CLR_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum qca_wlan_vendor_attr_ll_stats_get {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_INVALID = 0,
|
|
|
|
/* Unsigned 32 bit value provided by the caller issuing the GET stats
|
|
|
|
* command. When reporting the stats results, the driver uses the same
|
|
|
|
* value to indicate which GET request the results correspond to.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_ID = 1,
|
|
|
|
/* Unsigned 32 bit value - bit mask to identify what statistics are
|
|
|
|
* requested for retrieval.
|
|
|
|
* Radio Statistics 0x00000001
|
|
|
|
* Interface Statistics 0x00000020
|
|
|
|
* All Peer Statistics 0x00000040
|
|
|
|
* Peer Statistics 0x00000080
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_CONFIG_REQ_MASK = 2,
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_GET_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum qca_wlan_vendor_attr_ll_stats_results {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_INVALID = 0,
|
|
|
|
/* Unsigned 32bit value. Used by the driver; must match the request id
|
|
|
|
* provided with the QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET command.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_REQ_ID = 1,
|
|
|
|
|
|
|
|
/* Unsigned 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_BEACON_RX = 2,
|
|
|
|
/* Unsigned 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_RX = 3,
|
|
|
|
/* Unsigned 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_RX = 4,
|
|
|
|
/* Unsigned 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_MGMT_ACTION_TX = 5,
|
|
|
|
/* Signed 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_MGMT = 6,
|
|
|
|
/* Signed 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_DATA = 7,
|
|
|
|
/* Signed 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RSSI_ACK = 8,
|
|
|
|
|
|
|
|
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_* are
|
|
|
|
* nested within the interface stats.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Interface mode, e.g., STA, SOFTAP, IBSS, etc.
|
|
|
|
* Type = enum wifi_interface_mode.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MODE = 9,
|
|
|
|
/* Interface MAC address. An array of 6 Unsigned int8 */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_MAC_ADDR = 10,
|
|
|
|
/* Type = enum wifi_connection_state, e.g., DISCONNECTED,
|
|
|
|
* AUTHENTICATING, etc. valid for STA, CLI only.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_STATE = 11,
|
|
|
|
/* Type = enum wifi_roam_state. Roaming state, e.g., IDLE or ACTIVE
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_ROAMING = 12,
|
|
|
|
/* Unsigned 32 bit value. WIFI_CAPABILITY_XXX */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_CAPABILITIES = 13,
|
|
|
|
/* NULL terminated SSID. An array of 33 Unsigned 8bit values */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_SSID = 14,
|
|
|
|
/* BSSID. An array of 6 unsigned 8 bit values */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_BSSID = 15,
|
|
|
|
/* Country string advertised by AP. An array of 3 unsigned 8 bit
|
|
|
|
* values.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_AP_COUNTRY_STR = 16,
|
|
|
|
/* Country string for this association. An array of 3 unsigned 8 bit
|
|
|
|
* values.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_INFO_COUNTRY_STR = 17,
|
|
|
|
|
|
|
|
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_* could
|
|
|
|
* be nested within the interface stats.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Type = enum wifi_traffic_ac, e.g., V0, VI, BE and BK */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_AC = 18,
|
|
|
|
/* Unsigned int 32 value corresponding to respective AC */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MPDU = 19,
|
|
|
|
/* Unsigned int 32 value corresponding to respective AC */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MPDU = 20,
|
|
|
|
/* Unsigned int 32 value corresponding to respective AC */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_MCAST = 21,
|
|
|
|
/* Unsigned int 32 value corresponding to respective AC */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_MCAST = 22,
|
|
|
|
/* Unsigned int 32 value corresponding to respective AC */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RX_AMPDU = 23,
|
|
|
|
/* Unsigned int 32 value corresponding to respective AC */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_TX_AMPDU = 24,
|
|
|
|
/* Unsigned int 32 value corresponding to respective AC */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_MPDU_LOST = 25,
|
|
|
|
/* Unsigned int 32 value corresponding to respective AC */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES = 26,
|
|
|
|
/* Unsigned int 32 value corresponding to respective AC */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_SHORT = 27,
|
|
|
|
/* Unsigned int 32 values corresponding to respective AC */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_RETRIES_LONG = 28,
|
|
|
|
/* Unsigned int 32 values corresponding to respective AC */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MIN = 29,
|
|
|
|
/* Unsigned int 32 values corresponding to respective AC */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_MAX = 30,
|
|
|
|
/* Unsigned int 32 values corresponding to respective AC */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_TIME_AVG = 31,
|
|
|
|
/* Unsigned int 32 values corresponding to respective AC */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_CONTENTION_NUM_SAMPLES = 32,
|
|
|
|
/* Unsigned 32 bit value. Number of peers */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_NUM_PEERS = 33,
|
|
|
|
|
|
|
|
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_* are
|
|
|
|
* nested within the interface stats.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Type = enum wifi_peer_type. Peer type, e.g., STA, AP, P2P GO etc. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_TYPE = 34,
|
|
|
|
/* MAC addr corresponding to respective peer. An array of 6 unsigned
|
|
|
|
* 8 bit values.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_MAC_ADDRESS = 35,
|
|
|
|
/* Unsigned int 32 bit value representing capabilities corresponding
|
|
|
|
* to respective peer.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_CAPABILITIES = 36,
|
|
|
|
/* Unsigned 32 bit value. Number of rates */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_NUM_RATES = 37,
|
|
|
|
|
|
|
|
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_*
|
|
|
|
* are nested within the rate stat.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Wi-Fi Rate - separate attributes defined for individual fields */
|
|
|
|
|
|
|
|
/* Unsigned int 8 bit value; 0: OFDM, 1:CCK, 2:HT 3:VHT 4..7 reserved */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_PREAMBLE = 38,
|
|
|
|
/* Unsigned int 8 bit value; 0:1x1, 1:2x2, 3:3x3, 4:4x4 */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_NSS = 39,
|
|
|
|
/* Unsigned int 8 bit value; 0:20 MHz, 1:40 MHz, 2:80 MHz, 3:160 MHz */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BW = 40,
|
|
|
|
/* Unsigned int 8 bit value; OFDM/CCK rate code would be as per IEEE Std
|
|
|
|
* in the units of 0.5 Mbps HT/VHT it would be MCS index */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MCS_INDEX = 41,
|
|
|
|
|
|
|
|
/* Unsigned 32 bit value. Bit rate in units of 100 kbps */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BIT_RATE = 42,
|
|
|
|
|
|
|
|
|
|
|
|
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_STAT_* could be
|
|
|
|
* nested within the peer info stats.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Unsigned int 32 bit value. Number of successfully transmitted data
|
|
|
|
* packets, i.e., with ACK received corresponding to the respective
|
|
|
|
* rate.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_TX_MPDU = 43,
|
|
|
|
/* Unsigned int 32 bit value. Number of received data packets
|
|
|
|
* corresponding to the respective rate.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RX_MPDU = 44,
|
|
|
|
/* Unsigned int 32 bit value. Number of data packet losses, i.e., no ACK
|
|
|
|
* received corresponding to the respective rate.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MPDU_LOST = 45,
|
|
|
|
/* Unsigned int 32 bit value. Total number of data packet retries for
|
|
|
|
* the respective rate.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES = 46,
|
|
|
|
/* Unsigned int 32 bit value. Total number of short data packet retries
|
|
|
|
* for the respective rate.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_SHORT = 47,
|
|
|
|
/* Unsigned int 32 bit value. Total number of long data packet retries
|
|
|
|
* for the respective rate.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_RETRIES_LONG = 48,
|
|
|
|
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ID = 49,
|
|
|
|
/* Unsigned 32 bit value. Total number of msecs the radio is awake
|
|
|
|
* accruing over time.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME = 50,
|
|
|
|
/* Unsigned 32 bit value. Total number of msecs the radio is
|
|
|
|
* transmitting accruing over time.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME = 51,
|
|
|
|
/* Unsigned 32 bit value. Total number of msecs the radio is in active
|
|
|
|
* receive accruing over time.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_RX_TIME = 52,
|
|
|
|
/* Unsigned 32 bit value. Total number of msecs the radio is awake due
|
|
|
|
* to all scan accruing over time.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_SCAN = 53,
|
|
|
|
/* Unsigned 32 bit value. Total number of msecs the radio is awake due
|
|
|
|
* to NAN accruing over time.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_NBD = 54,
|
|
|
|
/* Unsigned 32 bit value. Total number of msecs the radio is awake due
|
|
|
|
* to GSCAN accruing over time.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_GSCAN = 55,
|
|
|
|
/* Unsigned 32 bit value. Total number of msecs the radio is awake due
|
|
|
|
* to roam scan accruing over time.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_ROAM_SCAN = 56,
|
|
|
|
/* Unsigned 32 bit value. Total number of msecs the radio is awake due
|
|
|
|
* to PNO scan accruing over time.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_PNO_SCAN = 57,
|
|
|
|
/* Unsigned 32 bit value. Total number of msecs the radio is awake due
|
|
|
|
* to Hotspot 2.0 scans and GAS exchange accruing over time.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_ON_TIME_HS20 = 58,
|
|
|
|
/* Unsigned 32 bit value. Number of channels. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_CHANNELS = 59,
|
|
|
|
|
|
|
|
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_* could
|
|
|
|
* be nested within the channel stats.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Type = enum wifi_channel_width. Channel width, e.g., 20, 40, 80 */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_WIDTH = 60,
|
|
|
|
/* Unsigned 32 bit value. Primary 20 MHz channel. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ = 61,
|
|
|
|
/* Unsigned 32 bit value. Center frequency (MHz) first segment. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ0 = 62,
|
|
|
|
/* Unsigned 32 bit value. Center frequency (MHz) second segment. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_CENTER_FREQ1 = 63,
|
|
|
|
|
|
|
|
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_* could be
|
|
|
|
* nested within the radio stats.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Unsigned int 32 bit value representing total number of msecs the
|
|
|
|
* radio is awake on that channel accruing over time, corresponding to
|
|
|
|
* the respective channel.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_ON_TIME = 64,
|
|
|
|
/* Unsigned int 32 bit value representing total number of msecs the CCA
|
|
|
|
* register is busy accruing over time corresponding to the respective
|
|
|
|
* channel.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_CCA_BUSY_TIME = 65,
|
|
|
|
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_NUM_RADIOS = 66,
|
|
|
|
|
|
|
|
/* Signifies the nested list of channel attributes
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_LL_STATS_CHANNEL_INFO_*
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_CH_INFO = 67,
|
|
|
|
|
|
|
|
/* Signifies the nested list of peer info attributes
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_*
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO = 68,
|
|
|
|
|
|
|
|
/* Signifies the nested list of rate info attributes
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_*
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_PEER_INFO_RATE_INFO = 69,
|
|
|
|
|
|
|
|
/* Signifies the nested list of wmm info attributes
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_*
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_INFO = 70,
|
|
|
|
|
|
|
|
/* Unsigned 8 bit value. Used by the driver; if set to 1, it indicates
|
|
|
|
* that more stats, e.g., peers or radio, are to follow in the next
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_LL_STATS_*_RESULTS event.
|
|
|
|
* Otherwise, it is set to 0.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RESULTS_MORE_DATA = 71,
|
|
|
|
|
|
|
|
/* Unsigned 64 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_AVERAGE_TSF_OFFSET = 72,
|
|
|
|
|
|
|
|
/* Unsigned 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_DETECTED = 73,
|
|
|
|
|
|
|
|
/* Unsigned 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_AVG_NUM_FRAMES_LEAKED = 74,
|
|
|
|
|
|
|
|
/* Unsigned 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_LEAKY_AP_GUARD_TIME = 75,
|
|
|
|
|
|
|
|
/* Unsigned 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_TYPE = 76,
|
|
|
|
|
|
|
|
/* Unsigned 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_NUM_TX_LEVELS = 77,
|
|
|
|
|
|
|
|
/* Number of msecs the radio spent in transmitting for each power level
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_RADIO_TX_TIME_PER_LEVEL = 78,
|
|
|
|
|
2016-10-17 09:37:22 +02:00
|
|
|
/* Unsigned 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_SUCC_CNT = 79,
|
|
|
|
/* Unsigned 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_RTS_FAIL_CNT = 80,
|
|
|
|
/* Unsigned 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_SUCC_CNT = 81,
|
|
|
|
/* Unsigned 32 bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_IFACE_PPDU_FAIL_CNT = 82,
|
|
|
|
|
2016-10-17 09:27:53 +02:00
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum qca_wlan_vendor_attr_ll_stats_type
|
|
|
|
{
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_INVALID = 0,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_RADIO = 1,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_IFACE = 2,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_PEERS = 3,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_AFTER_LAST,
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_MAX =
|
|
|
|
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
2016-10-25 12:50:46 +02:00
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_tdls_configuration - Attributes for
|
|
|
|
* TDLS configuration to the host driver.
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE: Configure the TDLS trigger
|
|
|
|
* mode in the host driver. enum qca_wlan_vendor_tdls_trigger_mode
|
|
|
|
* represents the different TDLS trigger modes.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD: Duration (u32) within
|
|
|
|
* which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD number
|
|
|
|
* of packets shall meet the criteria for implicit TDLS setup.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD: Number (u32) of Tx/Rx packets
|
|
|
|
* within a duration QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD
|
|
|
|
* to initiate a TDLS setup.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD: Time (u32) to initiate
|
|
|
|
* a TDLS Discovery to the peer.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT: Max number (u32) of
|
|
|
|
* discovery attempts to know the TDLS capability of the peer. A peer is
|
|
|
|
* marked as TDLS not capable if there is no response for all the attempts.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT: Represents a duration (u32)
|
|
|
|
* within which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD
|
|
|
|
* number of TX / RX frames meet the criteria for TDLS teardown.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD: Minimum number (u32)
|
|
|
|
* of Tx/Rx packets within a duration
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT to tear down a TDLS link.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD: Threshold
|
|
|
|
* corresponding to the RSSI of the peer below which a TDLS setup is
|
|
|
|
* triggered.
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD: Threshold
|
|
|
|
* corresponding to the RSSI of the peer above which a TDLS teardown is
|
|
|
|
* triggered.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_tdls_configuration {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_INVALID = 0,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE = 1,
|
|
|
|
|
|
|
|
/* Attributes configuring the TDLS Implicit Trigger */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD = 2,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD = 3,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD = 4,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT = 5,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT = 6,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD = 7,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD = 8,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD = 9,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST - 1
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_tdls_trigger_mode: Represents the TDLS trigger mode in
|
|
|
|
* the driver
|
|
|
|
*
|
|
|
|
* The following are the different values for
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE.
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT: The trigger to initiate/teardown
|
|
|
|
* the TDLS connection to a respective peer comes from the user space.
|
|
|
|
* wpa_supplicant provides the commands TDLS_SETUP, TDLS_TEARDOWN,
|
|
|
|
* TDLS_DISCOVER to do this.
|
|
|
|
* @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT: Host driver triggers this TDLS
|
|
|
|
* setup/teardown to the eligible peer once the configured criteria
|
|
|
|
* (such as TX/RX threshold, RSSI) is met. The attributes
|
|
|
|
* in QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IMPLICIT_PARAMS correspond to
|
|
|
|
* the different configuration criteria for the TDLS trigger from the
|
|
|
|
* host driver.
|
|
|
|
* @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL: Enables the driver to trigger
|
|
|
|
* the TDLS setup / teardown through the implicit mode only to the
|
|
|
|
* configured MAC addresses (wpa_supplicant, with tdls_external_control=1,
|
|
|
|
* configures the MAC address through TDLS_SETUP / TDLS_TEARDOWN commands).
|
|
|
|
* External mode works on top of the implicit mode. Thus the host driver
|
|
|
|
* is expected to configure in TDLS Implicit mode too to operate in
|
|
|
|
* External mode.
|
|
|
|
* Configuring External mode alone without Implicit mode is invalid.
|
|
|
|
*
|
|
|
|
* All the above implementations work as expected only when the host driver
|
|
|
|
* advertises the capability WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP - representing
|
|
|
|
* that the TDLS message exchange is not internal to the host driver, but
|
|
|
|
* depends on wpa_supplicant to do the message exchange.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_tdls_trigger_mode {
|
|
|
|
QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT = 1 << 0,
|
|
|
|
QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT = 1 << 1,
|
|
|
|
QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL = 1 << 2,
|
|
|
|
};
|
|
|
|
|
2016-12-06 01:13:36 +01:00
|
|
|
/**
|
|
|
|
* enum qca_vendor_attr_sar_limits_selections - Source of SAR power limits
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0: Select SAR profile #0
|
|
|
|
* that is hard-coded in the Board Data File (BDF).
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1: Select SAR profile #1
|
|
|
|
* that is hard-coded in the Board Data File (BDF).
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2: Select SAR profile #2
|
|
|
|
* that is hard-coded in the Board Data File (BDF).
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3: Select SAR profile #3
|
|
|
|
* that is hard-coded in the Board Data File (BDF).
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4: Select SAR profile #4
|
|
|
|
* that is hard-coded in the Board Data File (BDF).
|
2016-12-11 20:08:25 +01:00
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE: Do not select any
|
|
|
|
* source of SAR power limits, thereby disabling the SAR power
|
|
|
|
* limit feature.
|
2016-12-06 01:13:36 +01:00
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER: Select the SAR power
|
|
|
|
* limits configured by %QCA_NL80211_VENDOR_SUBCMD_SET_SAR.
|
|
|
|
*
|
|
|
|
* This enumerates the valid set of values that may be supplied for
|
|
|
|
* attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT in an instance of
|
|
|
|
* the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor command.
|
|
|
|
*/
|
|
|
|
enum qca_vendor_attr_sar_limits_selections {
|
2016-12-11 20:08:25 +01:00
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF0 = 0,
|
2016-12-06 01:13:36 +01:00
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF1 = 1,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF2 = 2,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF3 = 3,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_BDF4 = 4,
|
2016-12-11 20:08:25 +01:00
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_NONE = 5,
|
2016-12-06 01:13:36 +01:00
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT_USER = 6,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_vendor_attr_sar_limits_spec_modulations -
|
|
|
|
* SAR limits specification modulation
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK -
|
|
|
|
* CCK modulation
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM -
|
|
|
|
* OFDM modulation
|
|
|
|
*
|
|
|
|
* This enumerates the valid set of values that may be supplied for
|
|
|
|
* attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION in an
|
|
|
|
* instance of attribute %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC in an
|
|
|
|
* instance of the %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS vendor
|
|
|
|
* command.
|
|
|
|
*/
|
|
|
|
enum qca_vendor_attr_sar_limits_spec_modulations {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_CCK = 0,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION_OFDM = 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* enum qca_vendor_attr_sar_limits - Attributes for SAR power limits
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT: Optional (u32) value to
|
|
|
|
* select which SAR power limit table should be used. Valid
|
|
|
|
* values are enumerated in enum
|
|
|
|
* %qca_vendor_attr_sar_limits_selections. The existing SAR
|
|
|
|
* power limit selection is unchanged if this attribute is not
|
|
|
|
* present.
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS: Optional (u32) value
|
|
|
|
* which specifies the number of SAR power limit specifications
|
|
|
|
* which will follow.
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC: Nested array of SAR power
|
|
|
|
* limit specifications. The number of specifications is
|
|
|
|
* specified by @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS. Each
|
|
|
|
* specification contains a set of
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_* attributes. A
|
|
|
|
* specification is uniquely identified by the attributes
|
|
|
|
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND,
|
|
|
|
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN, and
|
|
|
|
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION and always
|
|
|
|
* contains as a payload the attribute
|
|
|
|
* %QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT.
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND: Optional (u32) value to
|
|
|
|
* indicate for which band this specification applies. Valid
|
|
|
|
* values are enumerated in enum %nl80211_band (although not all
|
|
|
|
* bands may be supported by a given device). If the attribute is
|
|
|
|
* not supplied then the specification will be applied to all
|
|
|
|
* supported bands.
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN: Optional (u32) value
|
|
|
|
* to indicate for which antenna chain this specification
|
|
|
|
* applies, i.e. 1 for chain 1, 2 for chain 2, etc. If the
|
|
|
|
* attribute is not supplied then the specification will be
|
|
|
|
* applied to all chains.
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION: Optional (u32)
|
|
|
|
* value to indicate for which modulation scheme this
|
|
|
|
* specification applies. Valid values are enumerated in enum
|
|
|
|
* %qca_vendor_attr_sar_limits_spec_modulations. If the attribute
|
|
|
|
* is not supplied then the specification will be applied to all
|
|
|
|
* modulation schemes.
|
|
|
|
*
|
|
|
|
* @QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT: Required (u32)
|
|
|
|
* value to specify the actual power limit value in units of 0.5
|
|
|
|
* dBm (i.e., a value of 11 represents 5.5 dBm).
|
|
|
|
*
|
|
|
|
* These attributes are used with %QCA_NL80211_VENDOR_SUBCMD_SET_SAR_LIMITS.
|
|
|
|
*/
|
|
|
|
enum qca_vendor_attr_sar_limits {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_INVALID = 0,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE = 1,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_NUM_SPECS = 2,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC = 3,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_BAND = 4,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_CHAIN = 5,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_MODULATION = 6,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SPEC_POWER_LIMIT = 7,
|
|
|
|
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_AFTER_LAST - 1
|
|
|
|
};
|
|
|
|
|
2016-12-08 14:28:42 +01:00
|
|
|
/**
|
|
|
|
* enum qca_wlan_vendor_attr_get_wifi_info: Attributes for data used by
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO sub command.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_get_wifi_info {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_INVALID = 0,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION = 1,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION = 2,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* enum qca_wlan_vendor_attr_wifi_logger_start: Attributes for data used by
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_WIFI_LOGGER_START sub command.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_wifi_logger_start {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_INVALID = 0,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_RING_ID = 1,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_VERBOSE_LEVEL = 2,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_FLAGS = 3,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_GET_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_WIFI_LOGGER_START_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum qca_wlan_vendor_attr_logger_results {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_INVALID = 0,
|
|
|
|
|
|
|
|
/* Unsigned 32-bit value; must match the request Id supplied by
|
|
|
|
* Wi-Fi HAL in the corresponding subcmd NL msg.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_REQUEST_ID = 1,
|
|
|
|
|
|
|
|
/* Unsigned 32-bit value; used to indicate the size of memory
|
|
|
|
* dump to be allocated.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MEMDUMP_SIZE = 2,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum qca_wlan_vendor_attr_roaming_config_params {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_INVALID = 0,
|
|
|
|
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD = 1,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID = 2,
|
|
|
|
|
|
|
|
/* Attributes for wifi_set_ssid_white_list */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS = 3,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST = 4,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID = 5,
|
|
|
|
|
|
|
|
/* Attributes for set_roam_params */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_THRESHOLD = 6,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_THRESHOLD = 7,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_FACTOR = 8,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_FACTOR = 9,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_MAX_BOOST = 10,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_LAZY_ROAM_HISTERESYS = 11,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALERT_ROAM_RSSI_TRIGGER = 12,
|
|
|
|
|
|
|
|
/* Attribute for set_lazy_roam */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE = 13,
|
|
|
|
|
|
|
|
/* Attribute for set_lazy_roam with preferences */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS = 14,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_NUM_BSSID = 15,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID = 16,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER = 17,
|
|
|
|
|
|
|
|
/* Attribute for set_blacklist bssid params */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS = 18,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID = 19,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID = 20,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* enum qca_wlan_vendor_attr_roam_subcmd: Attributes for data used by
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_ROAM sub command.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_roam_subcmd {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_INVALID = 0,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SSID_WHITE_LIST = 1,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_GSCAN_ROAM_PARAMS = 2,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_LAZY_ROAM = 3,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PREFS = 4,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PARAMS = 5,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BLACKLIST_BSSID = 6,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum qca_wlan_vendor_attr_gscan_config_params {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_INVALID = 0,
|
|
|
|
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_REQUEST_ID = 1,
|
|
|
|
|
|
|
|
/* Attributes for data used by
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_VALID_CHANNELS sub command.
|
|
|
|
*/
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_WIFI_BAND
|
|
|
|
= 2,
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_GET_VALID_CHANNELS_CONFIG_PARAM_MAX_CHANNELS
|
|
|
|
= 3,
|
|
|
|
|
|
|
|
/* Attributes for input params used by
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_START sub command.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Unsigned 32-bit value; channel frequency */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_CHANNEL = 4,
|
|
|
|
/* Unsigned 32-bit value; dwell time in ms. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_DWELL_TIME = 5,
|
|
|
|
/* Unsigned 8-bit value; 0: active; 1: passive; N/A for DFS */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_PASSIVE = 6,
|
|
|
|
/* Unsigned 8-bit value; channel class */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_CLASS = 7,
|
|
|
|
|
|
|
|
/* Unsigned 8-bit value; bucket index, 0 based */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_INDEX = 8,
|
|
|
|
/* Unsigned 8-bit value; band. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_BAND = 9,
|
|
|
|
/* Unsigned 32-bit value; desired period, in ms. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_PERIOD = 10,
|
|
|
|
/* Unsigned 8-bit value; report events semantics. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_REPORT_EVENTS = 11,
|
|
|
|
/* Unsigned 32-bit value. Followed by a nested array of
|
|
|
|
* GSCAN_CHANNEL_SPEC_* attributes.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS = 12,
|
|
|
|
|
|
|
|
/* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC_* attributes.
|
|
|
|
* Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_CHANNEL_SPEC = 13,
|
|
|
|
|
|
|
|
/* Unsigned 32-bit value; base timer period in ms. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_BASE_PERIOD = 14,
|
|
|
|
/* Unsigned 32-bit value; number of APs to store in each scan in the
|
|
|
|
* BSSID/RSSI history buffer (keep the highest RSSI APs).
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_MAX_AP_PER_SCAN = 15,
|
|
|
|
/* Unsigned 8-bit value; in %, when scan buffer is this much full, wake
|
|
|
|
* up AP.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_PERCENT
|
|
|
|
= 16,
|
|
|
|
|
|
|
|
/* Unsigned 8-bit value; number of scan bucket specs; followed by a
|
|
|
|
* nested array of_GSCAN_BUCKET_SPEC_* attributes and values. The size
|
|
|
|
* of the array is determined by NUM_BUCKETS.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS = 17,
|
|
|
|
|
|
|
|
/* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_* attributes.
|
|
|
|
* Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_NUM_BUCKETS
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC = 18,
|
|
|
|
|
|
|
|
/* Unsigned 8-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_FLUSH
|
|
|
|
= 19,
|
|
|
|
/* Unsigned 32-bit value; maximum number of results to be returned. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_GET_CACHED_SCAN_RESULTS_CONFIG_PARAM_MAX
|
|
|
|
= 20,
|
|
|
|
|
|
|
|
/* An array of 6 x unsigned 8-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_BSSID = 21,
|
|
|
|
/* Signed 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_RSSI_LOW = 22,
|
|
|
|
/* Signed 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_RSSI_HIGH = 23,
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_CHANNEL = 24,
|
|
|
|
|
|
|
|
/* Number of hotlist APs as unsigned 32-bit value, followed by a nested
|
|
|
|
* array of AP_THRESHOLD_PARAM attributes and values. The size of the
|
|
|
|
* array is determined by NUM_AP.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_BSSID_HOTLIST_PARAMS_NUM_AP = 25,
|
|
|
|
|
|
|
|
/* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM_* attributes.
|
|
|
|
* Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_NUM_CHANNEL_SPECS
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_AP_THRESHOLD_PARAM = 26,
|
|
|
|
|
|
|
|
/* Unsigned 32-bit value; number of samples for averaging RSSI. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_RSSI_SAMPLE_SIZE
|
|
|
|
= 27,
|
|
|
|
/* Unsigned 32-bit value; number of samples to confirm AP loss. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_LOST_AP_SAMPLE_SIZE
|
|
|
|
= 28,
|
|
|
|
/* Unsigned 32-bit value; number of APs breaching threshold. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_MIN_BREACHING = 29,
|
|
|
|
/* Unsigned 32-bit value; number of APs. Followed by an array of
|
|
|
|
* AP_THRESHOLD_PARAM attributes. Size of the array is NUM_AP.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SIGNIFICANT_CHANGE_PARAMS_NUM_AP = 30,
|
|
|
|
/* Unsigned 32-bit value; number of samples to confirm AP loss. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_BSSID_HOTLIST_PARAMS_LOST_AP_SAMPLE_SIZE
|
|
|
|
= 31,
|
|
|
|
/* Unsigned 32-bit value. If max_period is non zero or different than
|
|
|
|
* period, then this bucket is an exponential backoff bucket.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_MAX_PERIOD = 32,
|
|
|
|
/* Unsigned 32-bit value. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_BASE = 33,
|
|
|
|
/* Unsigned 32-bit value. For exponential back off bucket, number of
|
|
|
|
* scans to perform for a given period.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_BUCKET_SPEC_STEP_COUNT = 34,
|
|
|
|
/* Unsigned 8-bit value; in number of scans, wake up AP after these
|
|
|
|
* many scans.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SCAN_CMD_PARAMS_REPORT_THRESHOLD_NUM_SCANS
|
|
|
|
= 35,
|
|
|
|
|
|
|
|
/* Attributes for data used by
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SSID_HOTLIST sub command.
|
|
|
|
*/
|
|
|
|
/* Unsigned 3-2bit value; number of samples to confirm SSID loss. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_HOTLIST_PARAMS_LOST_SSID_SAMPLE_SIZE
|
|
|
|
= 36,
|
|
|
|
/* Number of hotlist SSIDs as unsigned 32-bit value, followed by a
|
|
|
|
* nested array of SSID_THRESHOLD_PARAM_* attributes and values. The
|
|
|
|
* size of the array is determined by NUM_SSID.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_HOTLIST_PARAMS_NUM_SSID = 37,
|
|
|
|
/* Array of QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_*
|
|
|
|
* attributes.
|
|
|
|
* Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_HOTLIST_PARAMS_NUM_SSID
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM = 38,
|
|
|
|
|
|
|
|
/* An array of 33 x unsigned 8-bit value; NULL terminated SSID */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_SSID = 39,
|
|
|
|
/* Unsigned 8-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_BAND = 40,
|
|
|
|
/* Signed 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_RSSI_LOW = 41,
|
|
|
|
/* Signed 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SSID_THRESHOLD_PARAM_RSSI_HIGH = 42,
|
|
|
|
/* Unsigned 32-bit value; a bitmask with additional gscan config flag.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_CONFIGURATION_FLAGS = 43,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_SUBCMD_CONFIG_PARAM_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum qca_wlan_vendor_attr_gscan_results {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_INVALID = 0,
|
|
|
|
|
|
|
|
/* Unsigned 32-bit value; must match the request Id supplied by
|
|
|
|
* Wi-Fi HAL in the corresponding subcmd NL msg.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_REQUEST_ID = 1,
|
|
|
|
|
|
|
|
/* Unsigned 32-bit value; used to indicate the status response from
|
|
|
|
* firmware/driver for the vendor sub-command.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_STATUS = 2,
|
|
|
|
|
|
|
|
/* GSCAN Valid Channels attributes */
|
|
|
|
/* Unsigned 32bit value; followed by a nested array of CHANNELS. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_CHANNELS = 3,
|
|
|
|
/* An array of NUM_CHANNELS x unsigned 32-bit value integers
|
|
|
|
* representing channel numbers.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CHANNELS = 4,
|
|
|
|
|
|
|
|
/* GSCAN Capabilities attributes */
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SCAN_CACHE_SIZE = 5,
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SCAN_BUCKETS = 6,
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_AP_CACHE_PER_SCAN
|
|
|
|
= 7,
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_RSSI_SAMPLE_SIZE
|
|
|
|
= 8,
|
|
|
|
/* Signed 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SCAN_REPORTING_THRESHOLD
|
|
|
|
= 9,
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_BSSIDS = 10,
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_SIGNIFICANT_WIFI_CHANGE_APS
|
|
|
|
= 11,
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_BSSID_HISTORY_ENTRIES
|
|
|
|
= 12,
|
|
|
|
|
|
|
|
/* GSCAN Attributes used with
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_RESULTS_AVAILABLE sub-command.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE = 13,
|
|
|
|
|
|
|
|
/* GSCAN attributes used with
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_FULL_SCAN_RESULT sub-command.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* An array of NUM_RESULTS_AVAILABLE x
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_*
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST = 14,
|
|
|
|
|
|
|
|
/* Unsigned 64-bit value; age of sample at the time of retrieval */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_TIME_STAMP = 15,
|
|
|
|
/* 33 x unsigned 8-bit value; NULL terminated SSID */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_SSID = 16,
|
|
|
|
/* An array of 6 x unsigned 8-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_BSSID = 17,
|
|
|
|
/* Unsigned 32-bit value; channel frequency in MHz */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_CHANNEL = 18,
|
|
|
|
/* Signed 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_RSSI = 19,
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_RTT = 20,
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_RTT_SD = 21,
|
|
|
|
/* Unsigned 16-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_BEACON_PERIOD = 22,
|
|
|
|
/* Unsigned 16-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_CAPABILITY = 23,
|
|
|
|
/* Unsigned 32-bit value; size of the IE DATA blob */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_IE_LENGTH = 24,
|
|
|
|
/* An array of IE_LENGTH x unsigned 8-bit value; blob of all the
|
|
|
|
* information elements found in the beacon; this data should be a
|
|
|
|
* packed list of wifi_information_element objects, one after the
|
|
|
|
* other.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_IE_DATA = 25,
|
|
|
|
|
|
|
|
/* Unsigned 8-bit value; set by driver to indicate more scan results are
|
|
|
|
* available.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_RESULT_MORE_DATA = 26,
|
|
|
|
|
|
|
|
/* GSCAN attributes for
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_EVENT sub-command.
|
|
|
|
*/
|
|
|
|
/* Unsigned 8-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_EVENT_TYPE = 27,
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SCAN_EVENT_STATUS = 28,
|
|
|
|
|
|
|
|
/* GSCAN attributes for
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_FOUND sub-command.
|
|
|
|
*/
|
|
|
|
/* Use attr QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE
|
|
|
|
* to indicate number of results.
|
|
|
|
* Also, use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the
|
|
|
|
* list of results.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* GSCAN attributes for
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_SIGNIFICANT_CHANGE sub-command.
|
|
|
|
*/
|
|
|
|
/* An array of 6 x unsigned 8-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_BSSID = 29,
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_CHANNEL
|
|
|
|
= 30,
|
|
|
|
/* Unsigned 32-bit value. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_NUM_RSSI
|
|
|
|
= 31,
|
|
|
|
/* A nested array of signed 32-bit RSSI values. Size of the array is
|
|
|
|
* determined by (NUM_RSSI of SIGNIFICANT_CHANGE_RESULT_NUM_RSSI.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_SIGNIFICANT_CHANGE_RESULT_RSSI_LIST
|
|
|
|
= 32,
|
|
|
|
|
|
|
|
/* GSCAN attributes used with
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CACHED_RESULTS sub-command.
|
|
|
|
*/
|
|
|
|
/* Use attr QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE
|
|
|
|
* to indicate number of gscan cached results returned.
|
|
|
|
* Also, use QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_LIST to indicate
|
|
|
|
* the list of gscan cached results.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* An array of NUM_RESULTS_AVAILABLE x
|
|
|
|
* QCA_NL80211_VENDOR_ATTR_GSCAN_CACHED_RESULTS_*
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_LIST = 33,
|
|
|
|
/* Unsigned 32-bit value; a unique identifier for the scan unit. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_SCAN_ID = 34,
|
|
|
|
/* Unsigned 32-bit value; a bitmask w/additional information about scan.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_CACHED_RESULTS_FLAGS = 35,
|
|
|
|
/* Use attr QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE
|
|
|
|
* to indicate number of wifi scan results/bssids retrieved by the scan.
|
|
|
|
* Also, use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the
|
|
|
|
* list of wifi scan results returned for each cached result block.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* GSCAN attributes for
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_PNO_NETWORK_FOUND sub-command.
|
|
|
|
*/
|
|
|
|
/* Use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE for
|
|
|
|
* number of results.
|
|
|
|
* Use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the nested
|
|
|
|
* list of wifi scan results returned for each
|
|
|
|
* wifi_passpoint_match_result block.
|
|
|
|
* Array size: QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_NUM_RESULTS_AVAILABLE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* GSCAN attributes for
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_PNO_PASSPOINT_NETWORK_FOUND sub-command.
|
|
|
|
*/
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES
|
|
|
|
= 36,
|
|
|
|
/* A nested array of
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_*
|
|
|
|
* attributes. Array size =
|
|
|
|
* *_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_NETWORK_FOUND_NUM_MATCHES.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_RESULT_LIST = 37,
|
|
|
|
|
|
|
|
/* Unsigned 32-bit value; network block id for the matched network */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_ID = 38,
|
|
|
|
/* Use QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_LIST to indicate the nested
|
|
|
|
* list of wifi scan results returned for each
|
|
|
|
* wifi_passpoint_match_result block.
|
|
|
|
*/
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP_LEN = 39,
|
|
|
|
/* An array size of PASSPOINT_MATCH_ANQP_LEN of unsigned 8-bit values;
|
|
|
|
* ANQP data in the information_element format.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_PNO_RESULTS_PASSPOINT_MATCH_ANQP = 40,
|
|
|
|
|
|
|
|
/* Unsigned 32-bit value; a GSCAN Capabilities attribute. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_HOTLIST_SSIDS = 41,
|
|
|
|
/* Unsigned 32-bit value; a GSCAN Capabilities attribute. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS = 42,
|
|
|
|
/* Unsigned 32-bit value; a GSCAN Capabilities attribute. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_NUM_EPNO_NETS_BY_SSID
|
|
|
|
= 43,
|
|
|
|
/* Unsigned 32-bit value; a GSCAN Capabilities attribute. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX_NUM_WHITELISTED_SSID
|
|
|
|
= 44,
|
|
|
|
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_BUCKETS_SCANNED = 45,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum qca_wlan_vendor_attr_pno_config_params {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_INVALID = 0,
|
|
|
|
/* Attributes for data used by
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_PNO_SET_PASSPOINT_LIST sub command.
|
|
|
|
*/
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM = 1,
|
|
|
|
/* Array of nested QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_*
|
|
|
|
* attributes. Array size =
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NETWORK_ARRAY = 2,
|
|
|
|
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ID = 3,
|
|
|
|
/* An array of 256 x unsigned 8-bit value; NULL terminated UTF-8 encoded
|
|
|
|
* realm, 0 if unspecified.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_REALM = 4,
|
|
|
|
/* An array of 16 x unsigned 32-bit value; roaming consortium ids to
|
|
|
|
* match, 0 if unspecified.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_CNSRTM_ID = 5,
|
|
|
|
/* An array of 6 x unsigned 8-bit value; MCC/MNC combination, 0s if
|
|
|
|
* unspecified.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_NETWORK_PARAM_ROAM_PLMN = 6,
|
|
|
|
|
|
|
|
/* Attributes for data used by
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_PNO_SET_LIST sub command.
|
|
|
|
*/
|
|
|
|
/* Unsigned 32-bit value */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS = 7,
|
|
|
|
/* Array of nested
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_*
|
|
|
|
* attributes. Array size =
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_NUM_NETWORKS.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORKS_LIST = 8,
|
|
|
|
/* An array of 33 x unsigned 8-bit value; NULL terminated SSID */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_SSID = 9,
|
|
|
|
/* Signed 8-bit value; threshold for considering this SSID as found,
|
|
|
|
* required granularity for this threshold is 4 dBm to 8 dBm.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_RSSI_THRESHOLD
|
|
|
|
= 10,
|
|
|
|
/* Unsigned 8-bit value; WIFI_PNO_FLAG_XXX */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_FLAGS = 11,
|
|
|
|
/* Unsigned 8-bit value; auth bit field for matching WPA IE */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_NETWORK_AUTH_BIT = 12,
|
|
|
|
/* Unsigned 8-bit to indicate ePNO type;
|
|
|
|
* It takes values from qca_wlan_epno_type
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_TYPE = 13,
|
|
|
|
|
|
|
|
/* Nested attribute to send the channel list */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_CHANNEL_LIST = 14,
|
|
|
|
|
|
|
|
/* Unsigned 32-bit value; indicates the interval between PNO scan
|
|
|
|
* cycles in msec.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_SET_LIST_PARAM_EPNO_SCAN_INTERVAL = 15,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EPNO_MIN5GHZ_RSSI = 16,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EPNO_MIN24GHZ_RSSI = 17,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EPNO_INITIAL_SCORE_MAX = 18,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EPNO_CURRENT_CONNECTION_BONUS = 19,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EPNO_SAME_NETWORK_BONUS = 20,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EPNO_SECURE_BONUS = 21,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EPNO_BAND5GHZ_BONUS = 22,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PNO_AFTER_LAST - 1,
|
|
|
|
};
|
|
|
|
|
2017-01-06 12:27:55 +01:00
|
|
|
/**
|
|
|
|
* qca_wlan_vendor_acs_select_reason: This represents the different reasons why
|
|
|
|
* the ACS has to be triggered. These values are used by
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON and
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_acs_select_reason {
|
|
|
|
/* Represents the reason that the ACS triggered during the AP start */
|
|
|
|
QCA_WLAN_VENDOR_ACS_SELECT_REASON_INIT,
|
|
|
|
/* Represents the reason that DFS found with the current channel */
|
|
|
|
QCA_WLAN_VENDOR_ACS_SELECT_REASON_DFS,
|
|
|
|
/* Represents the reason that LTE co-exist in the current band. */
|
|
|
|
QCA_WLAN_VENDOR_ACS_SELECT_REASON_LTE_COEX,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* qca_wlan_vendor_channel_prop_flags: This represent the flags for a channel.
|
|
|
|
* This is used by QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_channel_prop_flags {
|
|
|
|
/* Bits 0, 1, 2, and 3 are reserved */
|
|
|
|
|
|
|
|
/* Turbo channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_TURBO = 1 << 4,
|
|
|
|
/* CCK channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_CCK = 1 << 5,
|
|
|
|
/* OFDM channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_OFDM = 1 << 6,
|
|
|
|
/* 2.4 GHz spectrum channel. */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_2GHZ = 1 << 7,
|
|
|
|
/* 5 GHz spectrum channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_5GHZ = 1 << 8,
|
|
|
|
/* Only passive scan allowed */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_PASSIVE = 1 << 9,
|
|
|
|
/* Dynamic CCK-OFDM channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_DYN = 1 << 10,
|
|
|
|
/* GFSK channel (FHSS PHY) */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_GFSK = 1 << 11,
|
|
|
|
/* Radar found on channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_RADAR = 1 << 12,
|
|
|
|
/* 11a static turbo channel only */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_STURBO = 1 << 13,
|
|
|
|
/* Half rate channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HALF = 1 << 14,
|
|
|
|
/* Quarter rate channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_QUARTER = 1 << 15,
|
|
|
|
/* HT 20 channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT20 = 1 << 16,
|
|
|
|
/* HT 40 with extension channel above */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40PLUS = 1 << 17,
|
|
|
|
/* HT 40 with extension channel below */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40MINUS = 1 << 18,
|
|
|
|
/* HT 40 intolerant */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOL = 1 << 19,
|
|
|
|
/* VHT 20 channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT20 = 1 << 20,
|
|
|
|
/* VHT 40 with extension channel above */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40PLUS = 1 << 21,
|
|
|
|
/* VHT 40 with extension channel below */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT40MINUS = 1 << 22,
|
|
|
|
/* VHT 80 channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80 = 1 << 23,
|
|
|
|
/* HT 40 intolerant mark bit for ACS use */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_HT40INTOLMARK = 1 << 24,
|
|
|
|
/* Channel temporarily blocked due to noise */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_BLOCKED = 1 << 25,
|
|
|
|
/* VHT 160 channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT160 = 1 << 26,
|
|
|
|
/* VHT 80+80 channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_VHT80_80 = 1 << 27,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* qca_wlan_vendor_channel_prop_flags_ext: This represent the extended flags for
|
|
|
|
* each channel. This is used by
|
|
|
|
* QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_channel_prop_flags_ext {
|
|
|
|
/* Radar found on channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_RADAR_FOUND = 1 << 0,
|
|
|
|
/* DFS required on channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS = 1 << 1,
|
|
|
|
/* DFS required on channel for 2nd band of 80+80 */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CFREQ2 = 1 << 2,
|
|
|
|
/* If channel has been checked for DFS */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DFS_CLEAR = 1 << 3,
|
|
|
|
/* Excluded in 802.11d */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_11D_EXCLUDED = 1 << 4,
|
|
|
|
/* Channel Switch Announcement received on this channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CSA_RECEIVED = 1 << 5,
|
|
|
|
/* Ad-hoc is not allowed */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_ADHOC = 1 << 6,
|
|
|
|
/* Station only channel */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_DISALLOW_HOSTAP = 1 << 7,
|
|
|
|
/* DFS radar history for slave device (STA mode) */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_HISTORY_RADAR = 1 << 8,
|
|
|
|
/* DFS CAC valid for slave device (STA mode) */
|
|
|
|
QCA_WLAN_VENDOR_CHANNEL_PROP_FLAG_EXT_CAC_VALID = 1 << 9,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* qca_wlan_vendor_external_acs_event_chan_info_attr: Represents per channel
|
|
|
|
* information. These attributes are sent as part of
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO. Each set of the following
|
|
|
|
* attributes correspond to a single channel.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_external_acs_event_chan_info_attr {
|
|
|
|
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_INVALID = 0,
|
|
|
|
|
|
|
|
/* A bitmask (u32) with flags specified in
|
|
|
|
* enum qca_wlan_vendor_channel_prop_flags.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS = 1,
|
|
|
|
/* A bitmask (u32) with flags specified in
|
|
|
|
* enum qca_wlan_vendor_channel_prop_flags_ext.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAG_EXT = 2,
|
|
|
|
/* frequency in MHz (u32) */
|
|
|
|
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ = 3,
|
|
|
|
/* maximum regulatory transmission power (u32) */
|
|
|
|
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_REG_POWER = 4,
|
|
|
|
/* maximum transmission power (u32) */
|
|
|
|
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX_POWER = 5,
|
|
|
|
/* minimum transmission power (u32) */
|
|
|
|
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MIN_POWER = 6,
|
|
|
|
/* regulatory class id (u8) */
|
|
|
|
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_REG_CLASS_ID = 7,
|
|
|
|
/* maximum antenna gain in (u8) */
|
|
|
|
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_ANTENNA_GAIN = 8,
|
|
|
|
/* VHT segment 0 (u8) */
|
|
|
|
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0 = 9,
|
|
|
|
/* VHT segment 1 (u8) */
|
|
|
|
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1 = 10,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST,
|
|
|
|
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX =
|
|
|
|
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* qca_wlan_vendor_attr_pcl: Represents attributes for
|
|
|
|
* preferred channel list (PCL). These attributes are sent as part of
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_pcl {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PCL_INVALID = 0,
|
|
|
|
|
|
|
|
/* Channel number (u8) */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PCL_CHANNEL = 1,
|
|
|
|
/* Channel weightage (u8) */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_PCL_WEIGHT = 2,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* qca_wlan_vendor_attr_external_acs_event: Attribute to vendor sub-command
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This attribute will be sent by
|
|
|
|
* host driver.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_external_acs_event {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_INVALID = 0,
|
|
|
|
|
|
|
|
/* This reason (u8) refers to enum qca_wlan_vendor_acs_select_reason.
|
|
|
|
* This helps ACS module to understand why ACS needs to be started.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_REASON = 1,
|
|
|
|
/* Flag attribute to indicate if driver supports spectral scanning */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_SPECTRAL_SUPPORTED = 2,
|
|
|
|
/* Flag attribute to indicate if 11ac is offloaded to firmware */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_OFFLOAD_ENABLED = 3,
|
|
|
|
/* Flag attribute to indicate if driver provides additional channel
|
|
|
|
* capability as part of scan operation */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_ADD_CHAN_STATS_SUPPORT = 4,
|
|
|
|
/* Flag attribute to indicate interface status is UP */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_AP_UP = 5,
|
|
|
|
/* Operating mode (u8) of interface. Takes one of enum nl80211_iftype
|
|
|
|
* values. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_MODE = 6,
|
|
|
|
/* Channel width (u8). It takes one of enum nl80211_chan_width values.
|
|
|
|
* This is the upper bound of channel width. ACS logic should try to get
|
|
|
|
* a channel with the specified width and if not found, look for lower
|
|
|
|
* values.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_WIDTH = 7,
|
|
|
|
/* This (u8) will hold values of one of enum nl80211_bands */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_BAND = 8,
|
|
|
|
/* PHY/HW mode (u8). Takes one of enum qca_wlan_vendor_acs_hw_mode
|
|
|
|
* values */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PHY_MODE = 9,
|
|
|
|
/* Array of (u32) supported frequency list among which ACS should choose
|
|
|
|
* best frequency.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_FREQ_LIST = 10,
|
|
|
|
/* Preferred channel list by the driver which will have array of nested
|
|
|
|
* values as per enum qca_wlan_vendor_attr_pcl attribute.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PCL = 11,
|
|
|
|
/* Array of nested attribute for each channel. It takes attr as defined
|
|
|
|
* in enum qca_wlan_vendor_external_acs_event_chan_info_attr.
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_CHAN_INFO = 12,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_LAST - 1,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* qca_wlan_vendor_attr_external_acs_channels: Attributes to vendor subcmd
|
|
|
|
* QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This carries a list of channels
|
|
|
|
* in priority order as decided after ACS operation in userspace.
|
|
|
|
*/
|
|
|
|
enum qca_wlan_vendor_attr_external_acs_channels {
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_INVALID = 0,
|
|
|
|
|
|
|
|
/* One of reason code (u8) from enum qca_wlan_vendor_acs_select_reason
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON = 1,
|
|
|
|
|
|
|
|
/* Array of nested values for each channel with following attributes:
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_BAND,
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY,
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY,
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0,
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1,
|
|
|
|
* QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH
|
|
|
|
*/
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST = 2,
|
|
|
|
/* This (u8) will hold values of one of enum nl80211_bands */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_BAND = 3,
|
|
|
|
/* Primary channel (u8) */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY = 4,
|
|
|
|
/* Secondary channel (u8) used for HT 40 MHz channels */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY = 5,
|
|
|
|
/* VHT seg0 channel (u8) */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0 = 6,
|
|
|
|
/* VHT seg1 channel (u8) */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1 = 7,
|
|
|
|
/* Channel width (u8). Takes one of enum nl80211_chan_width values. */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH = 8,
|
|
|
|
|
|
|
|
/* keep last */
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST,
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_MAX =
|
|
|
|
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST - 1
|
|
|
|
};
|
|
|
|
|
2014-01-24 14:58:00 +01:00
|
|
|
#endif /* QCA_VENDOR_H */
|