DGNum/hostapd
6
0
Fork 0
Code Issues Pull requests 1 Projects Releases Packages Wiki Activity Actions
hostapd/wpa_supplicant/dbus/dbus_new.h

664 lines
19 KiB
C
Raw Normal View History

wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
/*
* WPA Supplicant / dbus-based control interface
* Copyright (c) 2006, Dan Williams <dcbw@redhat.com> and Red Hat, Inc.
dbus: Change BSS, Network and some errors interface names Remove ".Interface" part from BSS and Network objects and some error names.
2010-01-09 10:40:15 +01:00
* Copyright (c) 2009-2010, Witold Sowa <witold.sowa@gmail.com>
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
*
Update license notification in D-Bus interface files This updates these files to use the license notification that uses only the BSD license. The changes were acknowledged by email (Dan Williams <dcbw@redhat.com>, Sun, 01 Jul 2012 15:53:36 -0500). Signed-hostap: Jouni Malinen <j@w1.fi>
2012-07-02 11:04:38 +02:00
* This software may be distributed under the terms of the BSD license.
* See README for more details.
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
*/
#ifndef CTRL_IFACE_DBUS_NEW_H
#define CTRL_IFACE_DBUS_NEW_H
dbus: Fix some build combination without new D-Bus interface Include common/defs.h to get full enum definitions to avoid compiler errors without CONFIG_CTRL_IFACE_DBUS_NEW. Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-02 09:48:26 +01:00
#include "common/defs.h"
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
#include "p2p/p2p.h"
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
struct wpa_global;
struct wpa_supplicant;
struct wpa_ssid;
D-Bus: Interworking network selection Add the "InterworkingSelect" method to the DBus API to trigger an Interworking scan with ANQP fetches. When a BSS that matches a configured credential is found, the result is emitted using the signal "InterworkingAPAdded". Completion of the full InterworkingSelect operation is indicated with the "InterworkingSelectDone" signal. Signed-off-by: Damien Dejean <damiendejean@chromium.org>
2021-12-08 08:45:32 +01:00
struct wpa_cred;
struct wpa_bss;
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
struct wps_event_m2d;
struct wps_event_fail;
struct wps_credential;
enum wpas_dbus_prop {
WPAS_DBUS_PROP_AP_SCAN,
WPAS_DBUS_PROP_SCANNING,
dbus: Replace StateChanged with PropertiesChanged signal The actual supplicant state is exposed via a property on the interface object. So having a separate signal StateChanged for notifying about changes is a bad idea. The standard PropertiesChanged signal should be used for this. The advantage of StateChanged signal was that it includes the previous state, but not even NetworkManager is making use of this. And tracking the old state via the property and this signal is easily possible anyway.
2010-01-04 15:33:44 +01:00
WPAS_DBUS_PROP_STATE,
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
WPAS_DBUS_PROP_CURRENT_BSS,
WPAS_DBUS_PROP_CURRENT_NETWORK,
Add DBus state change notification for AuthMode property Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-15 12:54:59 +01:00
WPAS_DBUS_PROP_CURRENT_AUTH_MODE,
dbus: Emit property changed events when adding/removing BSSes The supplicant was not emitting property changed events when the BSSs property changed. Signed-off-by: Dan Williams <dcbw@redhat.com>
2010-12-17 14:56:01 +01:00
WPAS_DBUS_PROP_BSSS,
dbus: Expose connected stations on D-Bus Make it possible to list connected stations in AP mode over D-Bus, along with some of their properties: rx/tx packets, bytes, capabilities, etc. Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com> Rebased by Julian Andres Klode <juliank@ubuntu.com> and updated to use the new getter API. Further modified by Andrej Shadura to not error out when not in AP mode and to send separate StationAdded/StationRemoved signals instead of changing signatures of existing StaAuthorized/StaDeauthorized signals. Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
2018-10-07 14:31:51 +02:00
WPAS_DBUS_PROP_STATIONS,
Export disconnect reason code to dbus In the properties changed signal, added a new property "DisconnectReason", which carries the IEEE 802.11 reason code of the most recent disassociation or deauthentication event. The reason code is negative if it is locally generated. The property is sent to the DBUS immediately so as to prevent it from being coalesced with other disconnect events. Signed-off-by: Gary Morain <gmorain@chromium.org>
2012-06-30 15:43:50 +02:00
WPAS_DBUS_PROP_DISCONNECT_REASON,
dbus: Expose authentication status to D-Bus wpa_supplicant currently logs CTRL-EVENT-AUTH-FAILED errors when authentication fails, but doesn't expose any property to the D-Bus interface related to this. This change adds the "AuthStatusCode" property to the interface, which contains the IEEE 802.11 status code of the last authentication. Signed-off-by: Alex Khouderchah <akhouderchah@chromium.org>
2018-07-06 01:29:09 +02:00
WPAS_DBUS_PROP_AUTH_STATUS_CODE,
D-Bus: Add association response status code property for failure cases (Re)Association Response frame with status code other than 0 is now notified over DBUS as a part of PropertiesChanged signal. This can be used by application in case AP is denying association with status code 17 (band steering) so that it does not interfere in the BSSID selection logic of wpa_supplicant. Signed-off-by: Naveen Singh <nasingh@google.com>
2016-03-03 19:48:09 +01:00
WPAS_DBUS_PROP_ASSOC_STATUS_CODE,
dbus: Export roam time, roam complete, and session length Add new Interface properties "RoamTime", "RoamComplete", and "SessionLength". "RoamTime" carries the roam time of the most recent roam in milliseconds. "RoamComplete" carries True or False corresponding to the success status of the most recent roam. "SessionLength" carries the number of milliseconds corresponding to how long the connection to the last AP was before a roam or disconnect happened. Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2018-06-21 01:42:45 +02:00
WPAS_DBUS_PROP_ROAM_TIME,
WPAS_DBUS_PROP_ROAM_COMPLETE,
WPAS_DBUS_PROP_SESSION_LENGTH,
dbus: Export BSS Transition Management status Add new Interface properties "BSSTMStatus", which carries the status of the most recent BSS Transition Management request. This property will be logged in UMA to measure 802.11v success. Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2018-05-04 20:16:18 +02:00
WPAS_DBUS_PROP_BSS_TM_STATUS,
dbus: Add D-Bus property for current MAC address Since wpa_supplicant can change MAC address of the interface on its own (with randomization enabled) it makes sense to introduce MACAddress as a property of the interface and send notifications about its change. This allows other applications to just use D-Bus instead of both communicating over D-Bus with wpa_supplicant and listening to Netlink notifications for MAC changes. Signed-off-by: Andrzej Ostruszka <amo@semihalf.com>
2022-12-01 16:43:44 +01:00
WPAS_DBUS_PROP_MAC_ADDRESS,
dbus: Emit more information over D-Bus Allows informing the connection manager of additional information on CQM events. Allows the connection manager to request the same information on demand by using the existing "SignalPoll" method. * Add new property "SignalChange"         * Add storage for wpa_signal_info into wpa_supplicant context           object         * Copy memory from event to context object on CQM Event * Write a common conversion method to be used by both "SignalPoll" and   this property Signed-off-by: David Ruth <druth@chromium.org>
2022-12-01 00:33:10 +01:00
WPAS_DBUS_PROP_SIGNAL_CHANGE,
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
};
dbus: Add BSS property change notifications
2010-01-06 19:03:01 +01:00
enum wpas_dbus_bss_prop {
WPAS_DBUS_BSS_PROP_SIGNAL,
WPAS_DBUS_BSS_PROP_FREQ,
WPAS_DBUS_BSS_PROP_MODE,
WPAS_DBUS_BSS_PROP_PRIVACY,
WPAS_DBUS_BSS_PROP_RATES,
dbus: Change WPA/RSNIE byte array props to dicts Expose RSN and WPA properties for BSS objects containing information about key management and cipher suites. Get rid of WPA/RSN/WPSIE byte array properties and add IEs byte array property with all IE data instead.
2010-01-16 15:37:37 +01:00
WPAS_DBUS_BSS_PROP_WPA,
WPAS_DBUS_BSS_PROP_RSN,
dbus: Add getter for WPS properties Add "WPS" property to the DBus interface that allows to identify the active WPS method of a BSS. Signed-hostap: Sven Neumann <s.neumann@raumfeld.com>
2012-11-03 17:37:20 +01:00
WPAS_DBUS_BSS_PROP_WPS,
dbus: Change WPA/RSNIE byte array props to dicts Expose RSN and WPA properties for BSS objects containing information about key management and cipher suites. Get rid of WPA/RSN/WPSIE byte array properties and add IEs byte array property with all IE data instead.
2010-01-16 15:37:37 +01:00
WPAS_DBUS_BSS_PROP_IES,
dbus: add BSS Age property to indicate last-seen time "Age" is the age in seconds since the BSS was last seen, and is emitted as a PropertyChanged signal whenever the BSS is updated from a scan result. It also returns the correct age when queried directly. This property can be used to resolve issues where, if no other properties of the BSS changed from scan results (for example, if the BSS always had 100% signal) no D-Bus signals would be emitted to indicate that the BSS had just been seen in the scan. Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-09-04 20:10:54 +02:00
WPAS_DBUS_BSS_PROP_AGE,
dbus: Add BSS property change notifications
2010-01-06 19:03:01 +01:00
};
dbus: Expose connected stations on D-Bus Make it possible to list connected stations in AP mode over D-Bus, along with some of their properties: rx/tx packets, bytes, capabilities, etc. Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com> Rebased by Julian Andres Klode <juliank@ubuntu.com> and updated to use the new getter API. Further modified by Andrej Shadura to not error out when not in AP mode and to send separate StationAdded/StationRemoved signals instead of changing signatures of existing StaAuthorized/StaDeauthorized signals. Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
2018-10-07 14:31:51 +02:00
enum wpas_dbus_sta_prop {
WPAS_DBUS_STA_PROP_ADDRESS,
};
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
#define WPAS_DBUS_OBJECT_PATH_MAX 150
#define WPAS_DBUS_NEW_SERVICE "fi.w1.wpa_supplicant1"
#define WPAS_DBUS_NEW_PATH "/fi/w1/wpa_supplicant1"
#define WPAS_DBUS_NEW_INTERFACE "fi.w1.wpa_supplicant1"
#define WPAS_DBUS_NEW_PATH_INTERFACES WPAS_DBUS_NEW_PATH "/Interfaces"
#define WPAS_DBUS_NEW_IFACE_INTERFACE WPAS_DBUS_NEW_INTERFACE ".Interface"
#define WPAS_DBUS_NEW_IFACE_WPS WPAS_DBUS_NEW_IFACE_INTERFACE ".WPS"
#define WPAS_DBUS_NEW_NETWORKS_PART "Networks"
dbus: Change BSS, Network and some errors interface names Remove ".Interface" part from BSS and Network objects and some error names.
2010-01-09 10:40:15 +01:00
#define WPAS_DBUS_NEW_IFACE_NETWORK WPAS_DBUS_NEW_INTERFACE ".Network"
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
#define WPAS_DBUS_NEW_BSSIDS_PART "BSSs"
dbus: Change BSS, Network and some errors interface names Remove ".Interface" part from BSS and Network objects and some error names.
2010-01-09 10:40:15 +01:00
#define WPAS_DBUS_NEW_IFACE_BSS WPAS_DBUS_NEW_INTERFACE ".BSS"
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
dbus: Expose connected stations on D-Bus Make it possible to list connected stations in AP mode over D-Bus, along with some of their properties: rx/tx packets, bytes, capabilities, etc. Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com> Rebased by Julian Andres Klode <juliank@ubuntu.com> and updated to use the new getter API. Further modified by Andrej Shadura to not error out when not in AP mode and to send separate StationAdded/StationRemoved signals instead of changing signatures of existing StaAuthorized/StaDeauthorized signals. Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
2018-10-07 14:31:51 +02:00
#define WPAS_DBUS_NEW_STAS_PART "Stations"
#define WPAS_DBUS_NEW_IFACE_STA WPAS_DBUS_NEW_INTERFACE ".Station"
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
#define WPAS_DBUS_NEW_IFACE_P2PDEVICE \
WPAS_DBUS_NEW_IFACE_INTERFACE ".P2PDevice"
dbus: Add MeshGroupStarted signal This introduces a new interface for mesh and adds a signal that is similar to the control interface event MESH-GROUP-STARTED. Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-07-18 09:07:51 +02:00
#define WPAS_DBUS_NEW_IFACE_MESH WPAS_DBUS_NEW_IFACE_INTERFACE ".Mesh"
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
/*
* Groups correspond to P2P groups where this device is a GO (owner)
*/
#define WPAS_DBUS_NEW_P2P_GROUPS_PART "Groups"
#define WPAS_DBUS_NEW_IFACE_P2P_GROUP WPAS_DBUS_NEW_INTERFACE ".Group"
P2P: Update D-Bus network object semantics during group formation Do not emit network objects during P2P group formation since such network objects can confuse certain apps. Instead, a persistent group object is created to allow apps to keep track of persistent groups. Persistent group objects only represent the info needed to recreate the group. Also fixes a minor bug in the handling of persistent group objects during WPS operations. Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-23 20:25:13 +02:00
/*
* Different dbus object for persistent groups so they do not get confused
* with regular (configured) network objects.
*/
#define WPAS_DBUS_NEW_PERSISTENT_GROUPS_PART "PersistentGroups"
#define WPAS_DBUS_NEW_IFACE_PERSISTENT_GROUP \
WPAS_DBUS_NEW_INTERFACE ".PersistentGroup"
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
#define WPAS_DBUS_NEW_P2P_PEERS_PART "Peers"
#define WPAS_DBUS_NEW_IFACE_P2P_PEER WPAS_DBUS_NEW_INTERFACE ".Peer"
D-Bus: Interworking/Hotspot 2.0 credential operations Add "AddCred", "RemoveCred", and "RemoveAllCreds" methods to the D-Bus API of the network interface to allow the caller to manipulate a set of Interworking credentials similarly to the way this was enabled through the control interface. Signed-off-by: Damien Dejean <damiendejean@chromium.org>
2021-12-08 08:45:31 +01:00
#define WPAS_DBUS_NEW_CREDENTIALS_PART "Credentials"
#define WPAS_DBUS_NEW_IFACE_CREDENTIAL WPAS_DBUS_NEW_INTERFACE ".Credential"
Propagate scan failures over D-Bus If we receive a scan request via D-Bus and wpa_supplicant_scan_trigger fails, return the failure to the caller over D-Bus. Signed-hostap: mukesh agrawal <quiche@chromium.org>
2014-04-10 00:10:29 +02:00
/* Top-level Errors */
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
#define WPAS_DBUS_ERROR_UNKNOWN_ERROR \
WPAS_DBUS_NEW_INTERFACE ".UnknownError"
#define WPAS_DBUS_ERROR_INVALID_ARGS \
WPAS_DBUS_NEW_INTERFACE ".InvalidArgs"
#define WPAS_DBUS_ERROR_IFACE_EXISTS \
WPAS_DBUS_NEW_INTERFACE ".InterfaceExists"
Fix reassociate dbus method - Reassociate was only working when there was already a connect in place, which is not how the REASSOCIATE command from the ctrl interface works. Signed-off-by: Fionn Cleary <fionn.cleary@streamunlimited.com>
2014-04-04 15:45:26 +02:00
#define WPAS_DBUS_ERROR_IFACE_DISABLED \
WPAS_DBUS_NEW_INTERFACE ".InterfaceDisabled"
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
#define WPAS_DBUS_ERROR_IFACE_UNKNOWN \
WPAS_DBUS_NEW_INTERFACE ".InterfaceUnknown"
#define WPAS_DBUS_ERROR_NOT_CONNECTED \
dbus: Change BSS, Network and some errors interface names Remove ".Interface" part from BSS and Network objects and some error names.
2010-01-09 10:40:15 +01:00
WPAS_DBUS_NEW_INTERFACE ".NotConnected"
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
#define WPAS_DBUS_ERROR_NETWORK_UNKNOWN \
dbus: Change BSS, Network and some errors interface names Remove ".Interface" part from BSS and Network objects and some error names.
2010-01-09 10:40:15 +01:00
WPAS_DBUS_NEW_INTERFACE ".NetworkUnknown"
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
#define WPAS_DBUS_ERROR_CONNECT_CHANNEL_UNAVAILABLE \
WPAS_DBUS_NEW_INTERFACE ".ConnectChannelUnavailable"
#define WPAS_DBUS_ERROR_CONNECT_CHANNEL_UNSUPPORTED \
WPAS_DBUS_NEW_INTERFACE ".ConnectChannelUnsupported"
#define WPAS_DBUS_ERROR_CONNECT_UNSPECIFIED_ERROR \
WPAS_DBUS_NEW_INTERFACE ".ConnectUnspecifiedError"
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
#define WPAS_DBUS_ERROR_BLOB_EXISTS \
dbus: Change BSS, Network and some errors interface names Remove ".Interface" part from BSS and Network objects and some error names.
2010-01-09 10:40:15 +01:00
WPAS_DBUS_NEW_INTERFACE ".BlobExists"
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
#define WPAS_DBUS_ERROR_BLOB_UNKNOWN \
dbus: Change BSS, Network and some errors interface names Remove ".Interface" part from BSS and Network objects and some error names.
2010-01-09 10:40:15 +01:00
WPAS_DBUS_NEW_INTERFACE ".BlobUnknown"
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
DBus: Add ability to report probe requests Some applications require knowing about probe requests to identify devices. This can be the case in AP mode to see the devices before they connect, or even in P2P mode when operating as a P2P device to identify non-P2P peers (P2P peers are identified via PeerFound signals). As there are typically a lot of probe requests, require that an interested application subscribes to this signal so the bus isn't always flooded with these notifications. The notifications in DBus are then unicast only to that application. A small test script is also included. Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 20:13:38 +02:00
#define WPAS_DBUS_ERROR_SUBSCRIPTION_IN_USE \
WPAS_DBUS_NEW_INTERFACE ".SubscriptionInUse"
#define WPAS_DBUS_ERROR_NO_SUBSCRIPTION \
WPAS_DBUS_NEW_INTERFACE ".NoSubscription"
#define WPAS_DBUS_ERROR_SUBSCRIPTION_EPERM \
WPAS_DBUS_NEW_INTERFACE ".SubscriptionNotYou"
Propagate scan failures over D-Bus If we receive a scan request via D-Bus and wpa_supplicant_scan_trigger fails, return the failure to the caller over D-Bus. Signed-hostap: mukesh agrawal <quiche@chromium.org>
2014-04-10 00:10:29 +02:00
/* Interface-level errors */
#define WPAS_DBUS_ERROR_IFACE_SCAN_ERROR \
WPAS_DBUS_NEW_IFACE_INTERFACE ".ScanError"
DBus: Add ability to report probe requests Some applications require knowing about probe requests to identify devices. This can be the case in AP mode to see the devices before they connect, or even in P2P mode when operating as a P2P device to identify non-P2P peers (P2P peers are identified via PeerFound signals). As there are typically a lot of probe requests, require that an interested application subscribes to this signal so the bus isn't always flooded with these notifications. The notifications in DBus are then unicast only to that application. A small test script is also included. Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 20:13:38 +02:00
void wpas_dbus_subscribe_noc(struct wpas_dbus_priv *priv);
void wpas_dbus_unsubscribe_noc(struct wpas_dbus_priv *priv);
dbus: Remove wpas_dbus_callbacks abstraction This callback structure was specific to the new D-Bus API which makes it more or less pointless. It is just simpler to call the notification functions directly. More proper design could be to use a generic mechanism for registering notification callbacks into notify.c, but that is not yet available and should not be designed just based on a single user.
2010-01-01 17:45:29 +01:00
#ifdef CONFIG_CTRL_IFACE_DBUS_NEW
dbus: Share common initialization code for both old and new interface This was mostly identical code that had been copied for the new D-Bus API implementation and as such, should really have been shared from the beginning. In addition, the copied code ended up generating interesting stack traces since the actual D-Bus connection was being shared even though the pointer to it was stored in two distinct data structures. The old D-Bus code ended up dispatching some D-Bus callbacks which ended up running the new D-Bus code. Since the private context pointers were mostly identical, everything seemed to more or less work, but this design was just making things more complex and potentially very easy to break.
2009-12-30 23:15:56 +01:00
int wpas_dbus_ctrl_iface_init(struct wpas_dbus_priv *priv);
void wpas_dbus_ctrl_iface_deinit(struct wpas_dbus_priv *iface);
dbus: Remove wpas_dbus_callbacks abstraction This callback structure was specific to the new D-Bus API which makes it more or less pointless. It is just simpler to call the notification functions directly. More proper design could be to use a generic mechanism for registering notification callbacks into notify.c, but that is not yet available and should not be designed just based on a single user.
2010-01-01 17:45:29 +01:00
int wpas_dbus_register_interface(struct wpa_supplicant *wpa_s);
int wpas_dbus_unregister_interface(struct wpa_supplicant *wpa_s);
void wpas_dbus_signal_prop_changed(struct wpa_supplicant *wpa_s,
enum wpas_dbus_prop property);
dbus: Add BSS property change notifications
2010-01-06 19:03:01 +01:00
void wpas_dbus_bss_signal_prop_changed(struct wpa_supplicant *wpa_s,
enum wpas_dbus_bss_prop property,
unsigned int id);
dbus: Remove wpas_dbus_callbacks abstraction This callback structure was specific to the new D-Bus API which makes it more or less pointless. It is just simpler to call the notification functions directly. More proper design could be to use a generic mechanism for registering notification callbacks into notify.c, but that is not yet available and should not be designed just based on a single user.
2010-01-01 17:45:29 +01:00
void wpas_dbus_signal_network_enabled_changed(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid);
void wpas_dbus_signal_network_selected(struct wpa_supplicant *wpa_s, int id);
dbus: Implement EAP SM control request signals Add a D-Bus signal for EAP SM requests. This signal is emitted on the Interface object so that clients only have to listen to one object for requests rather than to all network objects. This signal is analogous to the socket control interface's CTRL-REQ- request. Signed-off-by: Dan Williams <dcbw@redhat.com>
2011-10-24 18:03:04 +02:00
void wpas_dbus_signal_network_request(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid,
enum wpa_ctrl_req_type rtype,
const char *default_text);
dbus: Remove wpas_dbus_callbacks abstraction This callback structure was specific to the new D-Bus API which makes it more or less pointless. It is just simpler to call the notification functions directly. More proper design could be to use a generic mechanism for registering notification callbacks into notify.c, but that is not yet available and should not be designed just based on a single user.
2010-01-01 17:45:29 +01:00
void wpas_dbus_signal_scan_done(struct wpa_supplicant *wpa_s, int success);
void wpas_dbus_signal_wps_cred(struct wpa_supplicant *wpa_s,
const struct wps_credential *cred);
void wpas_dbus_signal_wps_event_m2d(struct wpa_supplicant *wpa_s,
struct wps_event_m2d *m2d);
void wpas_dbus_signal_wps_event_fail(struct wpa_supplicant *wpa_s,
struct wps_event_fail *fail);
void wpas_dbus_signal_wps_event_success(struct wpa_supplicant *wpa_s);
D-Bus: Add WPS pbc-overlap Event This sends an Event D-Bus signal with name "pbc-overlap" for WPS-EVENT-OVERLAP. Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
2015-06-05 14:46:51 +02:00
void wpas_dbus_signal_wps_event_pbc_overlap(struct wpa_supplicant *wpa_s);
dbus: Remove wpas_dbus_callbacks abstraction This callback structure was specific to the new D-Bus API which makes it more or less pointless. It is just simpler to call the notification functions directly. More proper design could be to use a generic mechanism for registering notification callbacks into notify.c, but that is not yet available and should not be designed just based on a single user.
2010-01-01 17:45:29 +01:00
int wpas_dbus_register_network(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid);
int wpas_dbus_unregister_network(struct wpa_supplicant *wpa_s, int nid);
int wpas_dbus_unregister_bss(struct wpa_supplicant *wpa_s,
u8 bssid[ETH_ALEN], unsigned int id);
int wpas_dbus_register_bss(struct wpa_supplicant *wpa_s,
u8 bssid[ETH_ALEN], unsigned int id);
dbus: Expose connected stations on D-Bus Make it possible to list connected stations in AP mode over D-Bus, along with some of their properties: rx/tx packets, bytes, capabilities, etc. Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com> Rebased by Julian Andres Klode <juliank@ubuntu.com> and updated to use the new getter API. Further modified by Andrej Shadura to not error out when not in AP mode and to send separate StationAdded/StationRemoved signals instead of changing signatures of existing StaAuthorized/StaDeauthorized signals. Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
2018-10-07 14:31:51 +02:00
int wpas_dbus_unregister_sta(struct wpa_supplicant *wpa_s, const u8 *sta);
int wpas_dbus_register_sta(struct wpa_supplicant *wpa_s, const u8 *sta);
dbus: Remove wpas_dbus_callbacks abstraction This callback structure was specific to the new D-Bus API which makes it more or less pointless. It is just simpler to call the notification functions directly. More proper design could be to use a generic mechanism for registering notification callbacks into notify.c, but that is not yet available and should not be designed just based on a single user.
2010-01-01 17:45:29 +01:00
void wpas_dbus_signal_blob_added(struct wpa_supplicant *wpa_s,
const char *name);
void wpas_dbus_signal_blob_removed(struct wpa_supplicant *wpa_s,
const char *name);
void wpas_dbus_signal_debug_level_changed(struct wpa_global *global);
void wpas_dbus_signal_debug_timestamp_changed(struct wpa_global *global);
void wpas_dbus_signal_debug_show_keys_changed(struct wpa_global *global);
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
int wpas_dbus_register_peer(struct wpa_supplicant *wpa_s, const u8 *dev_addr);
P2P: Add D-Bus FindStopped to notify P2P-FIND-STOPPED event Add D-Bus notification mechanism of P2P-FIND-STOPPED event on fi.w1.wpa_supplicant1.Interface.P2PDevice interface. Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-05-13 14:03:48 +02:00
void wpas_dbus_signal_p2p_find_stopped(struct wpa_supplicant *wpa_s);
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
void wpas_dbus_signal_peer_device_found(struct wpa_supplicant *wpa_s,
const u8 *dev_addr);
int wpas_dbus_unregister_peer(struct wpa_supplicant *wpa_s,
const u8 *dev_addr);
void wpas_dbus_signal_peer_device_lost(struct wpa_supplicant *wpa_s,
const u8 *dev_addr);
dbus: Add PropertiesChanged signal to Peer object This signal will be thrown when a Peer joins or leaves a group. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2014-06-02 16:42:08 +02:00
void wpas_dbus_signal_peer_groups_changed(struct wpa_supplicant *wpa_s,
const u8 *dev_addr);
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
void wpas_dbus_signal_p2p_group_removed(struct wpa_supplicant *wpa_s,
const char *role);
void wpas_dbus_signal_p2p_provision_discovery(struct wpa_supplicant *wpa_s,
const u8 *dev_addr, int request,
enum p2p_prov_disc_status status,
u16 config_methods,
unsigned int generated_pin);
void wpas_dbus_signal_p2p_go_neg_req(struct wpa_supplicant *wpa_s,
P2P: Add GO Intent of connecting device in GO Negotiation Request event Add GO Intent information of connecting device in GO Negotiation Request event which will help applications to decide its own GO intent value in advance and can avoid failure cases when both devices use GO Intent 15 depending on application requirement. Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2015-06-02 07:47:33 +02:00
const u8 *src, u16 dev_passwd_id,
u8 go_intent);
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
void wpas_dbus_signal_p2p_group_started(struct wpa_supplicant *wpa_s,
D-Bus: Send P2P IP address assignment info with GroupStarted event This commit adds IP address information into GroupStarted event on the P2P client side like it is sent over the control interface. Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-11-02 11:20:28 +01:00
int client, int persistent,
const u8 *ip);
P2P: Add D-Bus signal GroupFormationFailure This is similar to the control interface event P2P-GROUP-FORMATION-FAILURE. Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-08-20 12:58:33 +02:00
void wpas_dbus_signal_p2p_group_formation_failure(struct wpa_supplicant *wpa_s,
const char *reason);
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
void wpas_dbus_register_p2p_group(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid);
P2P: Make GO negotiation peer and group information available over D-Bus The GO negotiation response is very cryptic at the moment. For a success message we only know on which interface the negotiation succeeded, not which peer. For a failure we know the interface also and a status code (number). It will be very useful for clients to know upon receipt of such a message which peer the negotiation occurred with. Now that the peer information is available and the API is changed already, the function composing the D-Bus message might as well include all GO negotiation information. This is done with a dict to make things easier on clients if this result information changes down the line. Signed-hostap: Reinette Chatre <reinette.chatre@intel.com> Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-18 15:52:33 +01:00
void wpas_dbus_signal_p2p_go_neg_resp(struct wpa_supplicant *wpa_s,
struct p2p_go_neg_results *res);
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
void wpas_dbus_unregister_p2p_group(struct wpa_supplicant *wpa_s,
const struct wpa_ssid *ssid);
P2P: Update D-Bus network object semantics during group formation Do not emit network objects during P2P group formation since such network objects can confuse certain apps. Instead, a persistent group object is created to allow apps to keep track of persistent groups. Persistent group objects only represent the info needed to recreate the group. Also fixes a minor bug in the handling of persistent group objects during WPS operations. Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-23 20:25:13 +02:00
int wpas_dbus_register_persistent_group(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid);
int wpas_dbus_unregister_persistent_group(struct wpa_supplicant *wpa_s,
int nid);
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
void wpas_dbus_signal_p2p_invitation_result(struct wpa_supplicant *wpa_s,
int status, const u8 *bssid);
void wpas_dbus_signal_p2p_peer_disconnected(struct wpa_supplicant *wpa_s,
const u8 *member);
void wpas_dbus_signal_p2p_sd_request(struct wpa_supplicant *wpa_s,
int freq, const u8 *sa, u8 dialog_token,
u16 update_indic, const u8 *tlvs,
size_t tlvs_len);
void wpas_dbus_signal_p2p_sd_response(struct wpa_supplicant *wpa_s,
const u8 *sa, u16 update_indic,
const u8 *tlvs, size_t tlvs_len);
void wpas_dbus_signal_p2p_peer_joined(struct wpa_supplicant *wpa_s,
const u8 *member);
P2P: Add WpsFailed signal in P2P D-Bus Signal is triggered if an error occurs during WPS provisioning phase. Signed-off-by: Jean-Michel.Bachot <jean-michelx.bachot@intel.com> Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-25 10:47:04 +02:00
void wpas_dbus_signal_p2p_wps_failed(struct wpa_supplicant *wpa_s,
struct wps_event_fail *fail);
Add dbus signal for information about server certification In general, this patch attemps to extend commit 00468b4650998144f794762206c695c962c54734 with dbus support. This can be used by dbus client to implement subject match text entry with preset value probed from server. This preset value, if user accepts it, is remembered and passed to subject_match config for any future authentication. Signed-off-by: Michael Chang <mchang@novell.com>
2011-07-05 11:22:32 +02:00
void wpas_dbus_signal_certification(struct wpa_supplicant *wpa_s,
int depth, const char *subject,
Add peer certificate alt subject name information to EAP events A new "CTRL-EVENT-EAP-PEER-ALT depth=<i> <alt name>" event is now used to provide information about server certificate chain alternative subject names for upper layers, e.g., to make it easier to configure constraints on the server certificate. For example: CTRL-EVENT-EAP-PEER-ALT depth=0 DNS:server.example.com Currently, this includes DNS, EMAIL, and URI components from the certificates. Similar information is priovided to D-Bus Certification signal in the new altsubject argument which is a string array of these items. Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-14 12:29:40 +01:00
const char *altsubject[],
int num_altsubject,
Add dbus signal for information about server certification In general, this patch attemps to extend commit 00468b4650998144f794762206c695c962c54734 with dbus support. This can be used by dbus client to implement subject match text entry with preset value probed from server. This preset value, if user accepts it, is remembered and passed to subject_match config for any future authentication. Signed-off-by: Michael Chang <mchang@novell.com>
2011-07-05 11:22:32 +02:00
const char *cert_hash,
const struct wpabuf *cert);
DBus: Add ability to report probe requests Some applications require knowing about probe requests to identify devices. This can be the case in AP mode to see the devices before they connect, or even in P2P mode when operating as a P2P device to identify non-P2P peers (P2P peers are identified via PeerFound signals). As there are typically a lot of probe requests, require that an interested application subscribes to this signal so the bus isn't always flooded with these notifications. The notifications in DBus are then unicast only to that application. A small test script is also included. Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 20:13:38 +02:00
void wpas_dbus_signal_preq(struct wpa_supplicant *wpa_s,
const u8 *addr, const u8 *dst, const u8 *bssid,
const u8 *ie, size_t ie_len, u32 ssi_signal);
wpa_supplicant: Report EAP connection progress to DBus Send an "EAP" signal via the new DBus interface under various conditions during EAP authentication: - During method selection (ACK and NAK) - During certificate verification - While sending and receiving TLS alert messages - EAP success and failure messages This provides DBus callers a number of new tools: - The ability to probe an AP for available EAP methods (given an identity). - The ability to identify why the remote certificate was not verified. - The ability to identify why the remote peer refused a TLS connection. Signed-hostap: Paul Stewart <pstew@chromium.org>
2012-06-04 20:10:01 +02:00
void wpas_dbus_signal_eap_status(struct wpa_supplicant *wpa_s,
const char *status, const char *parameter);
dbus: Add D-Bus signal for PSK mismatch heuristics As a workup action during disassociation, wpa_supplicant checks if the disconnection could have been caused by PSK mismatch during WPA 4-way handshake with function could_be_psk_mismatch() in event.c. A MSG_INFO message will be sent on the control interface when there could be a PSK mismatch, and this heuristic can be useful to indicate if the disconnection is caused by a wrong passphrase provided by the user. Here, propagate a new D-Bus signal 'PskMismatch' to notify other applicantions. Signed-off-by: Yichen Yu <yichenyu@chromium.org>
2022-12-20 08:08:41 +01:00
void wpas_dbus_signal_psk_mismatch(struct wpa_supplicant *wpa_s);
D-Bus: Emit signal when a station is authorized or deauthorized Add "StaAuthorized" and "StaDeauthorized" D-Bus interface in AP mode. After enabling the AP mode of wpa_supplicant, the other process need to get the MAC address and authorization status of every station, so wpa_supplicant emits signal when the station is authorized or deauthorized. Signed-hostap: Chengyi Zhao <chengyix.zhao@gmail.com>
2013-06-22 11:09:09 +02:00
void wpas_dbus_signal_sta_authorized(struct wpa_supplicant *wpa_s,
const u8 *sta);
void wpas_dbus_signal_sta_deauthorized(struct wpa_supplicant *wpa_s,
const u8 *sta);
D-Bus: Add InvitationReceived Signal This is equivalent to the P2P_EVENT_INVITATION_RECEIVED signal on the control interface. It can be used to sent the Invitation Received signal to applications written using D-Bus. Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2015-06-18 06:16:34 +02:00
void wpas_dbus_signal_p2p_invitation_received(struct wpa_supplicant *wpa_s,
const u8 *sa, const u8 *dev_addr,
const u8 *bssid, int id,
int op_freq);
dbus: Add MeshGroupStarted signal This introduces a new interface for mesh and adds a signal that is similar to the control interface event MESH-GROUP-STARTED. Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-07-18 09:07:51 +02:00
void wpas_dbus_signal_mesh_group_started(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid);
dbus: Add MeshGroupRemoved signal This is similar to the control interface event MESH-GROUP-REMOVED. Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-07-18 09:07:53 +02:00
void wpas_dbus_signal_mesh_group_removed(struct wpa_supplicant *wpa_s,
const u8 *meshid, u8 meshid_len,
int reason);
dbus: Add MeshPeerConnected signal This is similar to the control interface event MESH-PEER-CONNECTED. Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-07-18 09:07:54 +02:00
void wpas_dbus_signal_mesh_peer_connected(struct wpa_supplicant *wpa_s,
const u8 *peer_addr);
dbus: Add MeshPeerDisconnected signal This is similar to the control interface event MESH-PEER-DISCONNECTED. Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-07-18 09:07:55 +02:00
void wpas_dbus_signal_mesh_peer_disconnected(struct wpa_supplicant *wpa_s,
const u8 *peer_addr, int reason);
D-Bus: Interworking network selection Add the "InterworkingSelect" method to the DBus API to trigger an Interworking scan with ANQP fetches. When a BSS that matches a configured credential is found, the result is emitted using the signal "InterworkingAPAdded". Completion of the full InterworkingSelect operation is indicated with the "InterworkingSelectDone" signal. Signed-off-by: Damien Dejean <damiendejean@chromium.org>
2021-12-08 08:45:32 +01:00
void wpas_dbus_signal_interworking_ap_added(struct wpa_supplicant *wpa_s,
struct wpa_bss *bss,
struct wpa_cred *cred,
const char *type, int excluded,
int bh, int bss_load,
int conn_capab);
void wpas_dbus_signal_interworking_select_done(struct wpa_supplicant *wpa_s);
D-Bus: Add a signal for HS2.0 terms and conditions Add HS20TermsAndConditions signal to D-Bus API to allow clients to be notified when the network requires the acceptance of terms and conditions. The URL of the T&C page is provided as a signal parameter. Signed-off-by: Damien Dejean <damiendejean@chromium.org>
2024-01-19 16:52:54 +01:00
void wpas_dbus_signal_hs20_t_c_acceptance(struct wpa_supplicant *wpa_s,
const char *url);
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
#else /* CONFIG_CTRL_IFACE_DBUS_NEW */
dbus: Remove wpas_dbus_callbacks abstraction This callback structure was specific to the new D-Bus API which makes it more or less pointless. It is just simpler to call the notification functions directly. More proper design could be to use a generic mechanism for registering notification callbacks into notify.c, but that is not yet available and should not be designed just based on a single user.
2010-01-01 17:45:29 +01:00
static inline int wpas_dbus_register_interface(struct wpa_supplicant *wpa_s)
{
return 0;
}
static inline int wpas_dbus_unregister_interface(struct wpa_supplicant *wpa_s)
{
return 0;
}
#define wpas_dbus_signal_state_changed(w, n, o) do { } while (0)
static inline void wpas_dbus_signal_prop_changed(struct wpa_supplicant *wpa_s,
enum wpas_dbus_prop property)
{
}
dbus: Add BSS property change notifications
2010-01-06 19:03:01 +01:00
static inline void wpas_dbus_bss_signal_prop_changed(
struct wpa_supplicant *wpa_s, enum wpas_dbus_bss_prop property,
unsigned int id)
{
}
dbus: Remove wpas_dbus_callbacks abstraction This callback structure was specific to the new D-Bus API which makes it more or less pointless. It is just simpler to call the notification functions directly. More proper design could be to use a generic mechanism for registering notification callbacks into notify.c, but that is not yet available and should not be designed just based on a single user.
2010-01-01 17:45:29 +01:00
static inline void wpas_dbus_signal_network_enabled_changed(
struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid)
{
}
static inline void wpas_dbus_signal_network_selected(
struct wpa_supplicant *wpa_s, int id)
{
}
dbus: Implement EAP SM control request signals Add a D-Bus signal for EAP SM requests. This signal is emitted on the Interface object so that clients only have to listen to one object for requests rather than to all network objects. This signal is analogous to the socket control interface's CTRL-REQ- request. Signed-off-by: Dan Williams <dcbw@redhat.com>
2011-10-24 18:03:04 +02:00
static inline void wpas_dbus_signal_network_request(
struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid,
enum wpa_ctrl_req_type rtype, const char *default_txt)
{
}
dbus: Remove wpas_dbus_callbacks abstraction This callback structure was specific to the new D-Bus API which makes it more or less pointless. It is just simpler to call the notification functions directly. More proper design could be to use a generic mechanism for registering notification callbacks into notify.c, but that is not yet available and should not be designed just based on a single user.
2010-01-01 17:45:29 +01:00
static inline void wpas_dbus_signal_scan_done(struct wpa_supplicant *wpa_s,
int success)
{
}
static inline void wpas_dbus_signal_wps_cred(struct wpa_supplicant *wpa_s,
const struct wps_credential *cred)
{
}
static inline void wpas_dbus_signal_wps_event_m2d(struct wpa_supplicant *wpa_s,
struct wps_event_m2d *m2d)
{
}
static inline void wpas_dbus_signal_wps_event_fail(
struct wpa_supplicant *wpa_s, struct wps_event_fail *fail)
{
}
static inline void wpas_dbus_signal_wps_event_success(
struct wpa_supplicant *wpa_s)
{
}
D-Bus: Add WPS pbc-overlap Event This sends an Event D-Bus signal with name "pbc-overlap" for WPS-EVENT-OVERLAP. Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
2015-06-05 14:46:51 +02:00
static inline void wpas_dbus_signal_wps_event_pbc_overlap(
struct wpa_supplicant *wpa_s)
{
}
dbus: Remove wpas_dbus_callbacks abstraction This callback structure was specific to the new D-Bus API which makes it more or less pointless. It is just simpler to call the notification functions directly. More proper design could be to use a generic mechanism for registering notification callbacks into notify.c, but that is not yet available and should not be designed just based on a single user.
2010-01-01 17:45:29 +01:00
static inline int wpas_dbus_register_network(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid)
{
return 0;
}
static inline int wpas_dbus_unregister_network(struct wpa_supplicant *wpa_s,
int nid)
{
return 0;
}
static inline int wpas_dbus_unregister_bss(struct wpa_supplicant *wpa_s,
u8 bssid[ETH_ALEN], unsigned int id)
{
return 0;
}
static inline int wpas_dbus_register_bss(struct wpa_supplicant *wpa_s,
u8 bssid[ETH_ALEN], unsigned int id)
{
return 0;
}
dbus: Expose connected stations on D-Bus Make it possible to list connected stations in AP mode over D-Bus, along with some of their properties: rx/tx packets, bytes, capabilities, etc. Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com> Rebased by Julian Andres Klode <juliank@ubuntu.com> and updated to use the new getter API. Further modified by Andrej Shadura to not error out when not in AP mode and to send separate StationAdded/StationRemoved signals instead of changing signatures of existing StaAuthorized/StaDeauthorized signals. Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
2018-10-07 14:31:51 +02:00
static inline int wpas_dbus_unregister_sta(struct wpa_supplicant *wpa_s,
const u8 *sta)
{
return 0;
}
static inline int wpas_dbus_register_sta(struct wpa_supplicant *wpa_s,
const u8 *sta)
{
return 0;
}
dbus: Remove wpas_dbus_callbacks abstraction This callback structure was specific to the new D-Bus API which makes it more or less pointless. It is just simpler to call the notification functions directly. More proper design could be to use a generic mechanism for registering notification callbacks into notify.c, but that is not yet available and should not be designed just based on a single user.
2010-01-01 17:45:29 +01:00
static inline void wpas_dbus_signal_blob_added(struct wpa_supplicant *wpa_s,
const char *name)
{
}
static inline void wpas_dbus_signal_blob_removed(struct wpa_supplicant *wpa_s,
const char *name)
{
}
static inline void wpas_dbus_signal_debug_level_changed(
struct wpa_global *global)
{
}
static inline void wpas_dbus_signal_debug_timestamp_changed(
struct wpa_global *global)
{
}
static inline void wpas_dbus_signal_debug_show_keys_changed(
struct wpa_global *global)
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
{
}
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
static inline int wpas_dbus_register_peer(struct wpa_supplicant *wpa_s,
const u8 *dev_addr)
{
return 0;
}
static inline int wpas_dbus_unregister_peer(struct wpa_supplicant *wpa_s,
const u8 *dev_addr)
{
return 0;
}
dbus: Add PropertiesChanged signal to Peer object This signal will be thrown when a Peer joins or leaves a group. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2014-06-02 16:42:08 +02:00
static inline void
wpas_dbus_signal_peer_groups_changed(struct wpa_supplicant *wpa_s,
const u8 *dev_addr)
{
}
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
static inline void
wpas_dbus_signal_p2p_group_removed(struct wpa_supplicant *wpa_s,
const char *role)
{
}
static inline void
wpas_dbus_signal_p2p_provision_discovery(struct wpa_supplicant *wpa_s,
const u8 *dev_addr, int request,
enum p2p_prov_disc_status status,
u16 config_methods,
unsigned int generated_pin)
{
}
P2P: Add GO Intent of connecting device in GO Negotiation Request event Add GO Intent information of connecting device in GO Negotiation Request event which will help applications to decide its own GO intent value in advance and can avoid failure cases when both devices use GO Intent 15 depending on application requirement. Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2015-06-02 07:47:33 +02:00
static inline void wpas_dbus_signal_p2p_go_neg_req(struct wpa_supplicant *wpa_s,
const u8 *src,
u16 dev_passwd_id,
u8 go_intent)
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
{
}
static inline void
wpas_dbus_signal_p2p_group_started(struct wpa_supplicant *wpa_s,
D-Bus: Send P2P IP address assignment info with GroupStarted event This commit adds IP address information into GroupStarted event on the P2P client side like it is sent over the control interface. Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-11-02 11:20:28 +01:00
int client, int persistent,
const u8 *ip)
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
{
}
P2P: Add D-Bus signal GroupFormationFailure This is similar to the control interface event P2P-GROUP-FORMATION-FAILURE. Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-08-20 12:58:33 +02:00
static inline void
wpas_dbus_signal_p2p_group_formation_failure(struct wpa_supplicant *wpa_s,
const char *reason)
{
}
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
static inline void
wpas_dbus_register_p2p_group(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid)
{
}
P2P: Update D-Bus network object semantics during group formation Do not emit network objects during P2P group formation since such network objects can confuse certain apps. Instead, a persistent group object is created to allow apps to keep track of persistent groups. Persistent group objects only represent the info needed to recreate the group. Also fixes a minor bug in the handling of persistent group objects during WPS operations. Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-23 20:25:13 +02:00
static inline int wpas_dbus_register_persistent_group(
struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid)
{
return 0;
}
static inline int wpas_dbus_unregister_persistent_group(
struct wpa_supplicant *wpa_s, int nid)
{
return 0;
}
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
static inline void
P2P: Make GO negotiation peer and group information available over D-Bus The GO negotiation response is very cryptic at the moment. For a success message we only know on which interface the negotiation succeeded, not which peer. For a failure we know the interface also and a status code (number). It will be very useful for clients to know upon receipt of such a message which peer the negotiation occurred with. Now that the peer information is available and the API is changed already, the function composing the D-Bus message might as well include all GO negotiation information. This is done with a dict to make things easier on clients if this result information changes down the line. Signed-hostap: Reinette Chatre <reinette.chatre@intel.com> Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-18 15:52:33 +01:00
wpas_dbus_signal_p2p_go_neg_resp(struct wpa_supplicant *wpa_s,
struct p2p_go_neg_results *res)
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
{
}
static inline void
wpas_dbus_unregister_p2p_group(struct wpa_supplicant *wpa_s,
const struct wpa_ssid *ssid)
{
}
static inline void wpas_dbus_signal_p2p_invitation_result(
struct wpa_supplicant *wpa_s, int status,
const u8 *bssid)
{
}
static inline void
wpas_dbus_register_p2p_groupmember(struct wpa_supplicant *wpa_s,
const u8 *p2p_if_addr)
{
}
static inline void
wpas_dbus_signal_p2p_sd_request(struct wpa_supplicant *wpa_s, int freq,
const u8 *sa, u8 dialog_token, u16 update_indic,
const u8 *tlvs, size_t tlvs_len)
{
}
static inline void
wpas_dbus_signal_p2p_sd_response(struct wpa_supplicant *wpa_s,
const u8 *sa, u16 update_indic,
const u8 *tlvs, size_t tlvs_len)
{
}
static inline void
wpas_dbus_unregister_p2p_groupmember(struct wpa_supplicant *wpa_s,
const u8 *p2p_if_addr)
{
}
static inline void
wpas_dbus_signal_p2p_peer_joined(struct wpa_supplicant *wpa_s,
const u8 *member)
{
}
P2P: Add D-Bus FindStopped to notify P2P-FIND-STOPPED event Add D-Bus notification mechanism of P2P-FIND-STOPPED event on fi.w1.wpa_supplicant1.Interface.P2PDevice interface. Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-05-13 14:03:48 +02:00
static inline void
wpas_dbus_signal_p2p_find_stopped(struct wpa_supplicant *wpa_s)
{
}
DBus: Add support for P2P primitives Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-06-13 00:08:19 +02:00
static inline void
wpas_dbus_signal_peer_device_found(struct wpa_supplicant *wpa_s,
const u8 *dev_addr)
{
}
static inline void
wpas_dbus_signal_peer_device_lost(struct wpa_supplicant *wpa_s,
const u8 *dev_addr)
{
}
static inline void
wpas_dbus_signal_p2p_peer_disconnected(struct wpa_supplicant *wpa_s,
const u8 *member)
{
}
P2P: Add WpsFailed signal in P2P D-Bus Signal is triggered if an error occurs during WPS provisioning phase. Signed-off-by: Jean-Michel.Bachot <jean-michelx.bachot@intel.com> Signed-off-by: Jayant Sane <jayant.sane@intel.com>
2011-06-25 10:47:04 +02:00
static inline void
wpas_dbus_signal_p2p_wps_failed(struct wpa_supplicant *wpa_s,
struct wps_event_fail *fail)
{
}
Add dbus signal for information about server certification In general, this patch attemps to extend commit 00468b4650998144f794762206c695c962c54734 with dbus support. This can be used by dbus client to implement subject match text entry with preset value probed from server. This preset value, if user accepts it, is remembered and passed to subject_match config for any future authentication. Signed-off-by: Michael Chang <mchang@novell.com>
2011-07-05 11:22:32 +02:00
static inline void wpas_dbus_signal_certification(struct wpa_supplicant *wpa_s,
int depth,
const char *subject,
Add peer certificate alt subject name information to EAP events A new "CTRL-EVENT-EAP-PEER-ALT depth=<i> <alt name>" event is now used to provide information about server certificate chain alternative subject names for upper layers, e.g., to make it easier to configure constraints on the server certificate. For example: CTRL-EVENT-EAP-PEER-ALT depth=0 DNS:server.example.com Currently, this includes DNS, EMAIL, and URI components from the certificates. Similar information is priovided to D-Bus Certification signal in the new altsubject argument which is a string array of these items. Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-14 12:29:40 +01:00
const char *altsubject[],
int num_altsubject,
Add dbus signal for information about server certification In general, this patch attemps to extend commit 00468b4650998144f794762206c695c962c54734 with dbus support. This can be used by dbus client to implement subject match text entry with preset value probed from server. This preset value, if user accepts it, is remembered and passed to subject_match config for any future authentication. Signed-off-by: Michael Chang <mchang@novell.com>
2011-07-05 11:22:32 +02:00
const char *cert_hash,
const struct wpabuf *cert)
{
}
DBus: Add ability to report probe requests Some applications require knowing about probe requests to identify devices. This can be the case in AP mode to see the devices before they connect, or even in P2P mode when operating as a P2P device to identify non-P2P peers (P2P peers are identified via PeerFound signals). As there are typically a lot of probe requests, require that an interested application subscribes to this signal so the bus isn't always flooded with these notifications. The notifications in DBus are then unicast only to that application. A small test script is also included. Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 20:13:38 +02:00
static inline void wpas_dbus_signal_preq(struct wpa_supplicant *wpa_s,
const u8 *addr, const u8 *dst,
const u8 *bssid,
const u8 *ie, size_t ie_len,
u32 ssi_signal)
{
}
wpa_supplicant: Report EAP connection progress to DBus Send an "EAP" signal via the new DBus interface under various conditions during EAP authentication: - During method selection (ACK and NAK) - During certificate verification - While sending and receiving TLS alert messages - EAP success and failure messages This provides DBus callers a number of new tools: - The ability to probe an AP for available EAP methods (given an identity). - The ability to identify why the remote certificate was not verified. - The ability to identify why the remote peer refused a TLS connection. Signed-hostap: Paul Stewart <pstew@chromium.org>
2012-06-04 20:10:01 +02:00
static inline void wpas_dbus_signal_eap_status(struct wpa_supplicant *wpa_s,
const char *status,
const char *parameter)
{
}
dbus: Add D-Bus signal for PSK mismatch heuristics As a workup action during disassociation, wpa_supplicant checks if the disconnection could have been caused by PSK mismatch during WPA 4-way handshake with function could_be_psk_mismatch() in event.c. A MSG_INFO message will be sent on the control interface when there could be a PSK mismatch, and this heuristic can be useful to indicate if the disconnection is caused by a wrong passphrase provided by the user. Here, propagate a new D-Bus signal 'PskMismatch' to notify other applicantions. Signed-off-by: Yichen Yu <yichenyu@chromium.org>
2022-12-20 08:08:41 +01:00
static inline void wpas_dbus_signal_psk_mismatch(struct wpa_supplicant *wpa_s)
{
}
D-Bus: Emit signal when a station is authorized or deauthorized Add "StaAuthorized" and "StaDeauthorized" D-Bus interface in AP mode. After enabling the AP mode of wpa_supplicant, the other process need to get the MAC address and authorization status of every station, so wpa_supplicant emits signal when the station is authorized or deauthorized. Signed-hostap: Chengyi Zhao <chengyix.zhao@gmail.com>
2013-06-22 11:09:09 +02:00
static inline
void wpas_dbus_signal_sta_authorized(struct wpa_supplicant *wpa_s,
const u8 *sta)
{
}
static inline
void wpas_dbus_signal_sta_deauthorized(struct wpa_supplicant *wpa_s,
const u8 *sta)
{
}
D-Bus: Add InvitationReceived Signal This is equivalent to the P2P_EVENT_INVITATION_RECEIVED signal on the control interface. It can be used to sent the Invitation Received signal to applications written using D-Bus. Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2015-06-18 06:16:34 +02:00
static inline
void wpas_dbus_signal_p2p_invitation_received(struct wpa_supplicant *wpa_s,
const u8 *sa, const u8 *dev_addr,
const u8 *bssid, int id,
int op_freq)
{
}
dbus: Add MeshGroupStarted signal This introduces a new interface for mesh and adds a signal that is similar to the control interface event MESH-GROUP-STARTED. Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-07-18 09:07:51 +02:00
static inline
void wpas_dbus_signal_mesh_group_started(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid)
{
}
dbus: Add MeshGroupRemoved signal This is similar to the control interface event MESH-GROUP-REMOVED. Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-07-18 09:07:53 +02:00
static inline
void wpas_dbus_signal_mesh_group_removed(struct wpa_supplicant *wpa_s,
const u8 *meshid, u8 meshid_len,
int reason)
{
}
dbus: Add MeshPeerConnected signal This is similar to the control interface event MESH-PEER-CONNECTED. Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-07-18 09:07:54 +02:00
static inline
void wpas_dbus_signal_mesh_peer_connected(struct wpa_supplicant *wpa_s,
const u8 *peer_addr)
{
}
dbus: Add MeshPeerDisconnected signal This is similar to the control interface event MESH-PEER-DISCONNECTED. Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-07-18 09:07:55 +02:00
static inline
void wpas_dbus_signal_mesh_peer_disconnected(struct wpa_supplicant *wpa_s,
const u8 *peer_addr, int reason)
{
}
D-Bus: Interworking network selection Add the "InterworkingSelect" method to the DBus API to trigger an Interworking scan with ANQP fetches. When a BSS that matches a configured credential is found, the result is emitted using the signal "InterworkingAPAdded". Completion of the full InterworkingSelect operation is indicated with the "InterworkingSelectDone" signal. Signed-off-by: Damien Dejean <damiendejean@chromium.org>
2021-12-08 08:45:32 +01:00
static inline
void wpas_dbus_signal_interworking_ap_added(struct wpa_supplicant *wpa_s,
struct wpa_bss *bss,
struct wpa_cred *cred,
const char *type, int excluded,
int bh, int bss_load,
int conn_capab)
{
}
static inline
void wpas_dbus_signal_interworking_select_done(struct wpa_supplicant *wpa_s)
{
}
D-Bus: Add a signal for HS2.0 terms and conditions Add HS20TermsAndConditions signal to D-Bus API to allow clients to be notified when the network requires the acceptance of terms and conditions. The URL of the T&C page is provided as a signal parameter. Signed-off-by: Damien Dejean <damiendejean@chromium.org>
2024-01-19 16:52:54 +01:00
static inline
void wpas_dbus_signal_hs20_t_c_acceptance(struct wpa_supplicant *wpa_s,
const char *url)
{
}
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
#endif /* CONFIG_CTRL_IFACE_DBUS_NEW */
#endif /* CTRL_IFACE_DBUS_H_NEW */
Reference in a new issue Copy permalink