hostapd/tests/hwsim/test_connect_cmd.py

# cfg80211 connect command (SME in the driver/firmware)
# Copyright (c) 2013, Jouni Malinen <j@w1.fi>
#
# This software may be distributed under the terms of the BSD license.
# See README for more details.

import logging
logger = logging.getLogger()
import time

import hwsim_utils
import hostapd
from wpasupplicant import WpaSupplicant
from p2p_utils import *
from utils import *

def test_connect_cmd_open(dev, apdev):
    """Open connection using cfg80211 connect command"""
    params = {"ssid": "sta-connect",
              "manage_p2p": "1",
              "allow_cross_connection": "1"}
    hostapd.add_ap(apdev[0], params)

    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
    wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
    wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412",
                 bg_scan_period="1")
    wpas.dump_monitor()
    wpas.request("DISCONNECT")
    wpas.wait_disconnected()
    wpas.dump_monitor()

def test_connect_cmd_wep(dev, apdev):
    """WEP Open System using cfg80211 connect command"""
    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
    wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
    check_wep_capa(wpas)

    params = {"ssid": "sta-connect-wep", "wep_key0": '"hello"'}
    hapd = hostapd.add_ap(apdev[0], params)

    wpas.connect("sta-connect-wep", key_mgmt="NONE", scan_freq="2412",
                 wep_key0='"hello"')
    wpas.dump_monitor()
    hwsim_utils.test_connectivity(wpas, hapd)
    wpas.request("DISCONNECT")
    wpas.wait_disconnected()
    wpas.dump_monitor()

def test_connect_cmd_wep_shared(dev, apdev):
    """WEP Shared key using cfg80211 connect command"""
    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
    wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
    check_wep_capa(wpas)

    params = {"ssid": "sta-connect-wep", "wep_key0": '"hello"',
              "auth_algs": "2"}
    hapd = hostapd.add_ap(apdev[0], params)

    id = wpas.connect("sta-connect-wep", key_mgmt="NONE", scan_freq="2412",
                      auth_alg="SHARED", wep_key0='"hello"')
    wpas.dump_monitor()
    hwsim_utils.test_connectivity(wpas, hapd)
    wpas.request("DISCONNECT")
    wpas.remove_network(id)
    wpas.connect("sta-connect-wep", key_mgmt="NONE", scan_freq="2412",
                 auth_alg="OPEN SHARED", wep_key0='"hello"')
    wpas.dump_monitor()
    hwsim_utils.test_connectivity(wpas, hapd)
    wpas.request("DISCONNECT")
    wpas.wait_disconnected()
    wpas.dump_monitor()

def test_connect_cmd_p2p_management(dev, apdev):
    """Open connection using cfg80211 connect command and AP using P2P management"""
    params = {"ssid": "sta-connect",
              "manage_p2p": "1",
              "allow_cross_connection": "0"}
    hostapd.add_ap(apdev[0], params)

    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
    wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
    wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412")
    wpas.dump_monitor()
    wpas.request("DISCONNECT")
    wpas.wait_disconnected()
    wpas.dump_monitor()

def test_connect_cmd_wpa2_psk(dev, apdev):
    """WPA2-PSK connection using cfg80211 connect command"""
    params = hostapd.wpa2_params(ssid="sta-connect", passphrase="12345678")
    hostapd.add_ap(apdev[0], params)

    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
    wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
    wpas.connect("sta-connect", psk="12345678", scan_freq="2412")
    wpas.dump_monitor()
    wpas.request("DISCONNECT")
    wpas.wait_disconnected()
    wpas.dump_monitor()

def test_connect_cmd_concurrent_grpform_while_connecting(dev, apdev):
    """Concurrent P2P group formation while connecting to an AP using cfg80211 connect command"""
    logger.info("Start connection to an infrastructure AP")
    hapd = hostapd.add_ap(apdev[0], {"ssid": "test-open"})

    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
    wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
    wpas.connect("test-open", key_mgmt="NONE", wait_connect=False)
    wpas.dump_monitor()

    logger.info("Form a P2P group while connecting to an AP")
    wpas.request("SET p2p_no_group_iface 0")

    [i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_freq=2412,
                                           r_dev=wpas, r_freq=2412)
    check_grpform_results(i_res, r_res)
    remove_group(dev[0], wpas)
    wpas.dump_monitor()

    logger.info("Confirm AP connection after P2P group removal")
    hapd.wait_sta()
    hwsim_utils.test_connectivity(wpas, hapd)

    wpas.request("DISCONNECT")
    wpas.wait_disconnected()
    wpas.dump_monitor()

def test_connect_cmd_reject_assoc(dev, apdev):
    """Connection using cfg80211 connect command getting rejected"""
    params = {"ssid": "sta-connect",
              "require_ht": "1"}
    hostapd.add_ap(apdev[0], params)

    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
    wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
    wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412",
                 disable_ht="1", wait_connect=False)
    ev = wpas.wait_event(["CTRL-EVENT-ASSOC-REJECT"], timeout=15)
    if ev is None:
        raise Exception("Association rejection timed out")
    if "status_code=27" not in ev:
        raise Exception("Unexpected rejection status code")

    wpas.request("DISCONNECT")
    wpas.dump_monitor()

def test_connect_cmd_disconnect_event(dev, apdev):
    """Connection using cfg80211 connect command getting disconnected by the AP"""
    params = {"ssid": "sta-connect"}
    hapd = hostapd.add_ap(apdev[0], params)

    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
    wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
    wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412")

    if "OK" not in hapd.request("DEAUTHENTICATE " + wpas.p2p_interface_addr()):
        raise Exception("DEAUTHENTICATE command failed")
    ev = wpas.wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=5)
    if ev is None:
        raise Exception("Disconnection event timed out")
    # This event was actually based on deauthenticate event since we force
    # connect command to be used with a driver that supports auth+assoc for
    # testing purposes. Anyway, wait some time to allow the debug log to capture
    # the following NL80211_CMD_DISCONNECT event.
    time.sleep(0.1)
    wpas.dump_monitor()

    # Clean up to avoid causing issue for following test cases
    wpas.request("REMOVE_NETWORK all")
    wpas.wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=2)
    wpas.flush_scan_cache()
    wpas.dump_monitor()
    wpas.interface_remove("wlan5")
    del wpas

def test_connect_cmd_roam(dev, apdev):
    """cfg80211 connect command to trigger roam"""
    params = {"ssid": "sta-connect"}
    hostapd.add_ap(apdev[0], params)

    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
    wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
    wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412")
    wpas.dump_monitor()

    hostapd.add_ap(apdev[1], params)
    wpas.scan_for_bss(apdev[1]['bssid'], freq=2412, force_scan=True)
    wpas.roam(apdev[1]['bssid'])
    time.sleep(0.1)
    wpas.request("DISCONNECT")
    wpas.wait_disconnected()
    wpas.dump_monitor()

def test_connect_cmd_wpa_psk_roam(dev, apdev):
    """WPA2/WPA-PSK connection using cfg80211 connect command to trigger roam"""
    params = hostapd.wpa2_params(ssid="sta-connect", passphrase="12345678")
    hostapd.add_ap(apdev[0], params)

    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
    wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
    wpas.connect("sta-connect", psk="12345678", scan_freq="2412")
    wpas.dump_monitor()

    params = hostapd.wpa_params(ssid="sta-connect", passphrase="12345678")
    hostapd.add_ap(apdev[1], params)
    wpas.scan_for_bss(apdev[1]['bssid'], freq=2412, force_scan=True)
    wpas.roam(apdev[1]['bssid'])
    time.sleep(0.1)
    wpas.request("DISCONNECT")
    wpas.wait_disconnected()
    wpas.dump_monitor()

def test_connect_cmd_bssid_hint(dev, apdev):
    """cfg80211 connect command with bssid_hint"""
    params = {"ssid": "sta-connect"}
    hostapd.add_ap(apdev[0], params)
    hostapd.add_ap(apdev[1], params)

    # This does not really give full coverage with mac80211_hwsim since the
    # driver does not end up claiming support for driver-based BSS selection.
    # Anyway, some test coverage can be achieved for setting the parameter and
    # checking that it does not prevent connection with another BSSID.

    wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
    wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")

    wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412",
                 bssid_hint=apdev[0]['bssid'])
    wpas.request("REMOVE_NETWORK all")
    wpas.wait_disconnected()
    wpas.dump_monitor()

    wpas.request("BSS_FLUSH 0")
    wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412",
                 bssid_hint='22:33:44:55:66:77')
    wpas.request("REMOVE_NETWORK all")
    wpas.wait_disconnected()
    wpas.dump_monitor()

    # Additional coverage using ap_scan=2 to prevent scan entry -based selection
    # within wpa_supplicant from overriding bssid_hint.

    try:
        if "OK" not in wpas.request("AP_SCAN 2"):
            raise Exception("Failed to set AP_SCAN 2")
        wpas.request("BSS_FLUSH 0")
        wpas.connect("sta-connect", key_mgmt="NONE", scan_freq="2412",
                     bssid_hint='22:33:44:55:66:77')
        wpas.request("REMOVE_NETWORK all")
        wpas.wait_disconnected()
        wpas.dump_monitor()
    finally:
        wpas.request("AP_SCAN 1")
    wpas.flush_scan_cache()