DGNum/hostapd
6
0
Fork 0
Code Issues Pull requests 1 Projects Releases Packages Wiki Activity Actions
hostapd/wpa_supplicant/dbus/dbus_new_handlers.h

293 lines
11 KiB
C
Raw Permalink Normal View History

wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
/*
* WPA Supplicant / dbus-based control interface
* Copyright (c) 2006, Dan Williams <dcbw@redhat.com> and Red Hat, Inc.
dbus: Change WPA/RSNIE byte array props to dicts Expose RSN and WPA properties for BSS objects containing information about key management and cipher suites. Get rid of WPA/RSN/WPSIE byte array properties and add IEs byte array property with all IE data instead.
2010-01-16 15:37:37 +01:00
* Copyright (c) 2009-2010, Witold Sowa <witold.sowa@gmail.com>
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
*
Update license notification in D-Bus interface files This updates these files to use the license notification that uses only the BSD license. The changes were acknowledged by email (Dan Williams <dcbw@redhat.com>, Sun, 01 Jul 2012 15:53:36 -0500). Signed-hostap: Jouni Malinen <j@w1.fi>
2012-07-02 11:04:38 +02:00
* This software may be distributed under the terms of the BSD license.
* See README for more details.
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
*/
#ifndef CTRL_IFACE_DBUS_NEW_HANDLERS_H
#define CTRL_IFACE_DBUS_NEW_HANDLERS_H
dbus: Pass property description to getters/setters We'll use it later for global interface properties. Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-13 18:45:33 +02:00
#include "dbus_new_helpers.h"
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
struct network_handler_args {
struct wpa_supplicant *wpa_s;
struct wpa_ssid *ssid;
};
struct bss_handler_args {
struct wpa_supplicant *wpa_s;
dbus: Use the new BSS table with the new D-Bus API Replace the scan results -based implementation with the use of information from the new BSS table maintained by wpa_supplicant to get a more stable source of BSS data. Change the use of BSSID as the key for the BSS object to use the BSS table unique identifier so that multi-SSID APs can be handled properly.
2009-12-28 00:10:07 +01:00
unsigned int id;
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
};
dbus: Expose connected stations on D-Bus Make it possible to list connected stations in AP mode over D-Bus, along with some of their properties: rx/tx packets, bytes, capabilities, etc. Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com> Rebased by Julian Andres Klode <juliank@ubuntu.com> and updated to use the new getter API. Further modified by Andrej Shadura to not error out when not in AP mode and to send separate StationAdded/StationRemoved signals instead of changing signatures of existing StaAuthorized/StaDeauthorized signals. Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
2018-10-07 14:31:51 +02:00
struct sta_handler_args {
struct wpa_supplicant *wpa_s;
const u8 *sta;
};
dbus: clean up new D-Bus interface getters and setters A number of fixes/improvements here: 1) Remove casting of getter/setter function types which allows us to change the prototypes in the future and not have hard-to-find runtime segfaults 2) Instead of having the getters create a fake reply message which then gets its arguments copied into the real reply message, and is then disposed, just pass message iters around and have them add their arguments to the message itself 3) For setters, just pass in the message iter positioned at the start of the argument list, instead of each setter having to skip over the standard interface+property name 4) Convert error handling to use DBusError and return the error back down through the call stacks to the function that will actually send the error back to the caller, instead of having a fake DBusMessage of type DBUS_MESSAGE_TYPE_ERROR that then needs to have the error extracted from it. But most of all, this fixes various segfaults (like rh #725517 and #678625) which were caused by some functions deep down in the getter callpaths wanting a source DBusMessage* when the getters were used for two things: signals (which don't have a source DBusMessage) and methods (which will have a source DBusMessage that's being replied to). This duality made the code fragile when handling errors like invalid IEs over the air. Signed-off-by: Dan Williams <dcbw@redhat.com>
2011-07-29 20:25:39 +02:00
dbus_bool_t wpas_dbus_simple_property_getter(DBusMessageIter *iter,
const int type,
const void *val,
DBusError *error);
dbus: Add generic properties getter and setter
2010-01-01 10:56:56 +01:00
dbus: clean up new D-Bus interface getters and setters A number of fixes/improvements here: 1) Remove casting of getter/setter function types which allows us to change the prototypes in the future and not have hard-to-find runtime segfaults 2) Instead of having the getters create a fake reply message which then gets its arguments copied into the real reply message, and is then disposed, just pass message iters around and have them add their arguments to the message itself 3) For setters, just pass in the message iter positioned at the start of the argument list, instead of each setter having to skip over the standard interface+property name 4) Convert error handling to use DBusError and return the error back down through the call stacks to the function that will actually send the error back to the caller, instead of having a fake DBusMessage of type DBUS_MESSAGE_TYPE_ERROR that then needs to have the error extracted from it. But most of all, this fixes various segfaults (like rh #725517 and #678625) which were caused by some functions deep down in the getter callpaths wanting a source DBusMessage* when the getters were used for two things: signals (which don't have a source DBusMessage) and methods (which will have a source DBusMessage that's being replied to). This duality made the code fragile when handling errors like invalid IEs over the air. Signed-off-by: Dan Williams <dcbw@redhat.com>
2011-07-29 20:25:39 +02:00
dbus_bool_t wpas_dbus_simple_property_setter(DBusMessageIter *iter,
DBusError *error,
const int type, void *val);
dbus: Add generic properties getter and setter
2010-01-01 10:56:56 +01:00
dbus: clean up new D-Bus interface getters and setters A number of fixes/improvements here: 1) Remove casting of getter/setter function types which allows us to change the prototypes in the future and not have hard-to-find runtime segfaults 2) Instead of having the getters create a fake reply message which then gets its arguments copied into the real reply message, and is then disposed, just pass message iters around and have them add their arguments to the message itself 3) For setters, just pass in the message iter positioned at the start of the argument list, instead of each setter having to skip over the standard interface+property name 4) Convert error handling to use DBusError and return the error back down through the call stacks to the function that will actually send the error back to the caller, instead of having a fake DBusMessage of type DBUS_MESSAGE_TYPE_ERROR that then needs to have the error extracted from it. But most of all, this fixes various segfaults (like rh #725517 and #678625) which were caused by some functions deep down in the getter callpaths wanting a source DBusMessage* when the getters were used for two things: signals (which don't have a source DBusMessage) and methods (which will have a source DBusMessage that's being replied to). This duality made the code fragile when handling errors like invalid IEs over the air. Signed-off-by: Dan Williams <dcbw@redhat.com>
2011-07-29 20:25:39 +02:00
dbus_bool_t wpas_dbus_simple_array_property_getter(DBusMessageIter *iter,
const int type,
const void *array,
size_t array_len,
DBusError *error);
dbus: Add generic properties getter and setter
2010-01-01 10:56:56 +01:00
dbus: utility to create dbus message from wpabuf array If a wpabuf array is used to store basic typed data that we would like to send over D-Bus then this utility will be of help when it places the data in a variant with format aa? (array of an array of type ?, with ? indicating any basic type). Signed-hostap: Jayant Sane <jayant.sane@intel.com> Signed-hostap: Angie Chinchilla <angie.v.chinchilla@intel.com> intended-for: hostap-1
2012-02-25 09:45:17 +01:00
dbus_bool_t wpas_dbus_simple_array_array_property_getter(DBusMessageIter *iter,
const int type,
struct wpabuf **array,
size_t array_len,
DBusError *error);
D-Bus: Use a helper function to get possibly NULL strings This type of check is used in quite a few getter functions, so add a helper function to take care of it. Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-23 10:22:00 +01:00
dbus_bool_t wpas_dbus_string_property_getter(DBusMessageIter *iter,
const void *val,
DBusError *error);
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
DBusMessage * wpas_dbus_handler_create_interface(DBusMessage *message,
struct wpa_global *global);
DBusMessage * wpas_dbus_handler_remove_interface(DBusMessage *message,
struct wpa_global *global);
DBusMessage * wpas_dbus_handler_get_interface(DBusMessage *message,
struct wpa_global *global);
D-Bus: Add a dbus handler for expected disconnection Add a global D-Bus handler ExpectDisconnect for setting wpa_s->own_disconnect_req flag. This flag will prevent wpa_supplicant from adding blacklists and requesting incomplete scan upon the incoming disconnection. This is mainly meant for a case where suspend/resume is used and some external component knows about that and can provide the information to wpa_supplicant before the disconnection happens. Signed-off-by: Ningyuan Wang <nywang@google.com>
2015-09-29 23:13:33 +02:00
DBusMessage * wpas_dbus_handler_expect_disconnect(DBusMessage *message,
struct wpa_global *global);
dbus: Pass property description to getters/setters We'll use it later for global interface properties. Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-13 18:45:33 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_debug_level);
DECLARE_ACCESSOR(wpas_dbus_getter_debug_timestamp);
DECLARE_ACCESSOR(wpas_dbus_getter_debug_show_keys);
DECLARE_ACCESSOR(wpas_dbus_setter_debug_level);
DECLARE_ACCESSOR(wpas_dbus_setter_debug_timestamp);
DECLARE_ACCESSOR(wpas_dbus_setter_debug_show_keys);
DECLARE_ACCESSOR(wpas_dbus_getter_interfaces);
DECLARE_ACCESSOR(wpas_dbus_getter_eap_methods);
DECLARE_ACCESSOR(wpas_dbus_getter_global_capabilities);
dbus: Expose interface globals via D-Bus properties All interface globals are now exposed as D-Bus properties of type string, and parsed via the normal interface global parsing functions. Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-13 18:47:46 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_iface_global);
DECLARE_ACCESSOR(wpas_dbus_setter_iface_global);
dbus: Add global capabilities property Otherwise it's difficult to determine if the supplicant was built with CONFIG_AP, CONFIG_IBSS_RSN, CONFIG_P2P, etc. CONFIG_AP and CONFIG_P2P can be inferred from the introspection data of the Interface object, but CONFIG_IBSS_RSN does not change the introspection data at all and thus it's impossible to determine whether the supplicant supports it without knowing its compile-time options. Signed-hostap: Dan Williams <dcbw@redhat.com> intended-for: hostap-1
2012-09-29 18:06:30 +02:00
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
DBusMessage * wpas_dbus_handler_scan(DBusMessage *message,
struct wpa_supplicant *wpa_s);
dbus: Add AbortScan method to abort ongoing scan Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-04-13 05:58:11 +02:00
DBusMessage * wpas_dbus_handler_abort_scan(DBusMessage *message,
struct wpa_supplicant *wpa_s);
dbus: Add SignalPoll() method to report current signal properties Analogous to the control interface's SIGNAL_POLL request. Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-09-10 19:34:56 +02:00
DBusMessage * wpas_dbus_handler_signal_poll(DBusMessage *message,
struct wpa_supplicant *wpa_s);
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
DBusMessage * wpas_dbus_handler_disconnect(DBusMessage *message,
struct wpa_supplicant *wpa_s);
dbus: clean up new D-Bus interface getters and setters A number of fixes/improvements here: 1) Remove casting of getter/setter function types which allows us to change the prototypes in the future and not have hard-to-find runtime segfaults 2) Instead of having the getters create a fake reply message which then gets its arguments copied into the real reply message, and is then disposed, just pass message iters around and have them add their arguments to the message itself 3) For setters, just pass in the message iter positioned at the start of the argument list, instead of each setter having to skip over the standard interface+property name 4) Convert error handling to use DBusError and return the error back down through the call stacks to the function that will actually send the error back to the caller, instead of having a fake DBusMessage of type DBUS_MESSAGE_TYPE_ERROR that then needs to have the error extracted from it. But most of all, this fixes various segfaults (like rh #725517 and #678625) which were caused by some functions deep down in the getter callpaths wanting a source DBusMessage* when the getters were used for two things: signals (which don't have a source DBusMessage) and methods (which will have a source DBusMessage that's being replied to). This duality made the code fragile when handling errors like invalid IEs over the air. Signed-off-by: Dan Williams <dcbw@redhat.com>
2011-07-29 20:25:39 +02:00
dbus_bool_t set_network_properties(struct wpa_supplicant *wpa_s,
struct wpa_ssid *ssid,
DBusMessageIter *iter,
DBusError *error);
P2P: More complete persistent group management over D-Bus Extend commit c2762e410fa319f75a174aeb12343beddf99fce4 to allow applications to manage (add/remove) persistent groups and accepted network object paths while invoking a persistent group.
2011-06-24 10:20:19 +02:00
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
DBusMessage * wpas_dbus_handler_add_network(DBusMessage *message,
wpa_supplicant: Add DBus "Reassociate" command Create a DBus command to reassociate, similar to the ctrl-interface "reassociate" command. Signed-hostap: Paul Stewart <pstew@chromium.org>
2012-08-09 12:54:36 +02:00
struct wpa_supplicant *wpa_s);
DBusMessage * wpas_dbus_handler_reassociate(DBusMessage *message,
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
struct wpa_supplicant *wpa_s);
Add a reattach command for fast reassociate-back-to-same-BSS Add "reattach" command to perform single-channel single-ssid scan instead of full scan when trying to reconnect to the currently "connected" network (assuming old scan results are not current enough to skip the scan completely). This allows the scan result to come back in much faster time. In ath9k, the scan took around 12 seconds with full background scan, and only 0.1 second with the single-channel single-ssid scan. Thus, take much less time for the client to re-establish connection with the currently "connected" network. Signed-hostap: Peter Qiu <zqiu@chromium.org>
2014-03-06 19:06:04 +01:00
DBusMessage * wpas_dbus_handler_reattach(DBusMessage *message,
struct wpa_supplicant *wpa_s);
dbus: Add Reconnect command to D-Bus Interface This has same behavior as the ctrl_iface RECONNECT command. Signed-off-by: Mayank Haarit <mayank.h@samsung.com> Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
2015-06-12 13:27:19 +02:00
DBusMessage * wpas_dbus_handler_reconnect(DBusMessage *message,
struct wpa_supplicant *wpa_s);
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
DBusMessage * wpas_dbus_handler_remove_network(DBusMessage *message,
struct wpa_supplicant *wpa_s);
dbus: Add RemoveAllNetworks to the new D-Bus API This adds a new command to the interface to remove all configured netblocks. Without this it's necessary to query properties on the interface and explicitly remove each netblock.
2011-03-20 11:12:12 +01:00
DBusMessage * wpas_dbus_handler_remove_all_networks(
DBusMessage *message, struct wpa_supplicant *wpa_s);
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
DBusMessage * wpas_dbus_handler_select_network(DBusMessage *message,
struct wpa_supplicant *wpa_s);
Implement control request replies for the D-Bus interface Add a D-Bus mechanism for clients to respond to the NetworkRequest signal. Signed-off-by: Dan Williams <dcbw@redhat.com>
2011-10-24 18:09:06 +02:00
DBusMessage * wpas_dbus_handler_network_reply(DBusMessage *message,
struct wpa_supplicant *wpa_s);
DBus: Add "Roam" command support Add D-Bus interface for ROAM command, imitating the existing wpa_cli command. Chromium OS has been carrying a form of this patch for a very long time. I've cleaned it up a bit and documented it. Signed-off-by: Brian Norris <briannorris@chromium.org>
2020-06-23 19:39:02 +02:00
DBusMessage * wpas_dbus_handler_roam(DBusMessage *message,
struct wpa_supplicant *wpa_s);
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
DBusMessage * wpas_dbus_handler_add_blob(DBusMessage *message,
struct wpa_supplicant *wpa_s);
DBusMessage * wpas_dbus_handler_get_blob(DBusMessage *message,
struct wpa_supplicant *wpa_s);
DBusMessage * wpas_dbus_handler_remove_blob(DBusMessage *message,
struct wpa_supplicant *wpa_s);
D-Bus: Add support to set pkcs11_{engine,module}_path Add SetPKCS11EngineAndModulePath D-Bus method. Add PKCS11EnginePath and PKCS11ModulePath D-Bus property getters. Signed-hostap: Michael Schaller <misch@google.com>
2013-11-23 09:38:07 +01:00
DBusMessage * wpas_dbus_handler_set_pkcs11_engine_and_module_path(
DBusMessage *message, struct wpa_supplicant *wpa_s);
dbus: Add D-Bus methods to flush the BSS cache Add an "Interface.FlushBSS" method to the new D-Bus API and a "flush" method to the old API. Both take an age parameter that is a threshold (in seconds) for selecting entries to evict. Setting this parameter to zero flushes all entries from the cache. This mechanism is useful for a connection manager to clear state at startup and on resume (where the age parameter may be used to hold onto recent/valid data).
2011-03-20 11:02:33 +01:00
DBusMessage * wpas_dbus_handler_flush_bss(DBusMessage *message,
struct wpa_supplicant *wpa_s);
D-Bus: Add AutoScan interface method to set/unset autoscan parameters Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 18:05:09 +02:00
DBusMessage * wpas_dbus_handler_autoscan(DBusMessage *message,
struct wpa_supplicant *wpa_s);
dbus_new: Add EAP logon/logoff Add "EAPLogoff" and "EAPLogon" interface DBus commands which parallel the "logoff" and "logon" wpa_ctrl commands which terminate and restart EAP authentication. Slightly enhance the "logon" case by expiring any running "startWhile" timer. Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-04-23 16:57:55 +02:00
DBusMessage * wpas_dbus_handler_eap_logoff(DBusMessage *message,
struct wpa_supplicant *wpa_s);
DBusMessage * wpas_dbus_handler_eap_logon(DBusMessage *message,
struct wpa_supplicant *wpa_s);
D-Bus: Interworking/Hotspot 2.0 credential operations Add "AddCred", "RemoveCred", and "RemoveAllCreds" methods to the D-Bus API of the network interface to allow the caller to manipulate a set of Interworking credentials similarly to the way this was enabled through the control interface. Signed-off-by: Damien Dejean <damiendejean@chromium.org>
2021-12-08 08:45:31 +01:00
DBusMessage * wpas_dbus_handler_add_cred(DBusMessage *message,
struct wpa_supplicant *wpa_s);
DBusMessage * wpas_dbus_handler_remove_cred(DBusMessage *message,
struct wpa_supplicant *wpa_s);
DBusMessage * wpas_dbus_handler_remove_all_creds(DBusMessage *message,
struct wpa_supplicant *wpa_s);
D-Bus: Interworking network selection Add the "InterworkingSelect" method to the DBus API to trigger an Interworking scan with ANQP fetches. When a BSS that matches a configured credential is found, the result is emitted using the signal "InterworkingAPAdded". Completion of the full InterworkingSelect operation is indicated with the "InterworkingSelectDone" signal. Signed-off-by: Damien Dejean <damiendejean@chromium.org>
2021-12-08 08:45:32 +01:00
DBusMessage *
wpas_dbus_handler_interworking_select(DBusMessage *message,
struct wpa_supplicant *wpa_s);
DBus: Add a method to get ANQP fields Add a D-Bus method to perform ANQP get requests. The new method is equivalent to the "anqp_get" command available in wpa_cli. Signed-off-by: Damien Dejean <damiendejean@chromium.org>
2024-02-20 13:11:40 +01:00
DBusMessage *
wpas_dbus_handler_anqp_get(DBusMessage *message, struct wpa_supplicant *wpa_s);
dbus: Pass property description to getters/setters We'll use it later for global interface properties. Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-13 18:45:33 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_capabilities);
DECLARE_ACCESSOR(wpas_dbus_getter_state);
DECLARE_ACCESSOR(wpas_dbus_getter_scanning);
DECLARE_ACCESSOR(wpas_dbus_getter_ap_scan);
DECLARE_ACCESSOR(wpas_dbus_setter_ap_scan);
DECLARE_ACCESSOR(wpas_dbus_getter_fast_reauth);
DECLARE_ACCESSOR(wpas_dbus_setter_fast_reauth);
DECLARE_ACCESSOR(wpas_dbus_getter_disconnect_reason);
DECLARE_ACCESSOR(wpas_dbus_getter_disassociate_reason);
dbus: Expose authentication status to D-Bus wpa_supplicant currently logs CTRL-EVENT-AUTH-FAILED errors when authentication fails, but doesn't expose any property to the D-Bus interface related to this. This change adds the "AuthStatusCode" property to the interface, which contains the IEEE 802.11 status code of the last authentication. Signed-off-by: Alex Khouderchah <akhouderchah@chromium.org>
2018-07-06 01:29:09 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_auth_status_code);
D-Bus: Add association response status code property for failure cases (Re)Association Response frame with status code other than 0 is now notified over DBUS as a part of PropertiesChanged signal. This can be used by application in case AP is denying association with status code 17 (band steering) so that it does not interfere in the BSSID selection logic of wpa_supplicant. Signed-off-by: Naveen Singh <nasingh@google.com>
2016-03-03 19:48:09 +01:00
DECLARE_ACCESSOR(wpas_dbus_getter_assoc_status_code);
dbus: Export roam time, roam complete, and session length Add new Interface properties "RoamTime", "RoamComplete", and "SessionLength". "RoamTime" carries the roam time of the most recent roam in milliseconds. "RoamComplete" carries True or False corresponding to the success status of the most recent roam. "SessionLength" carries the number of milliseconds corresponding to how long the connection to the last AP was before a roam or disconnect happened. Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2018-06-21 01:42:45 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_roam_time);
DECLARE_ACCESSOR(wpas_dbus_getter_roam_complete);
DECLARE_ACCESSOR(wpas_dbus_getter_session_length);
dbus: Export BSS Transition Management status Add new Interface properties "BSSTMStatus", which carries the status of the most recent BSS Transition Management request. This property will be logged in UMA to measure 802.11v success. Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2018-05-04 20:16:18 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_bss_tm_status);
dbus: Pass property description to getters/setters We'll use it later for global interface properties. Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-13 18:45:33 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_bss_expire_age);
DECLARE_ACCESSOR(wpas_dbus_setter_bss_expire_age);
DECLARE_ACCESSOR(wpas_dbus_getter_bss_expire_count);
DECLARE_ACCESSOR(wpas_dbus_setter_bss_expire_count);
DECLARE_ACCESSOR(wpas_dbus_getter_country);
DECLARE_ACCESSOR(wpas_dbus_setter_country);
DECLARE_ACCESSOR(wpas_dbus_getter_scan_interval);
DECLARE_ACCESSOR(wpas_dbus_setter_scan_interval);
DECLARE_ACCESSOR(wpas_dbus_getter_ifname);
DECLARE_ACCESSOR(wpas_dbus_getter_driver);
DECLARE_ACCESSOR(wpas_dbus_getter_bridge_ifname);
D-Bus: Allow changing an interface bridge via D-Bus D-Bus clients can call CreateInterface() once and use the resulting Interface object to connect multiple times to different networks. However, if the network interface gets added to a bridge, clients currently have to remove the Interface object and create a new one. Improve this by supporting the change of the BridgeIfname property of an existing Interface object. Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
2020-09-30 18:34:36 +02:00
DECLARE_ACCESSOR(wpas_dbus_setter_bridge_ifname);
D-Bus: Add ConfigFile parameter into the interface properties This patch aims to expose the configuration file path as an interface property, like is done with the driver and the bridge name. Doing so, higher layer programs become responsible to recreate interfaces with the correct configuration file path when programs need to remove them. Signed-off-by: Jose Blanquicet <blanquicet@gmail.com>
2016-08-23 14:16:00 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_config_file);
dbus: Pass property description to getters/setters We'll use it later for global interface properties. Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-13 18:45:33 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_current_bss);
DECLARE_ACCESSOR(wpas_dbus_getter_current_network);
DECLARE_ACCESSOR(wpas_dbus_getter_current_auth_mode);
DECLARE_ACCESSOR(wpas_dbus_getter_bsss);
DECLARE_ACCESSOR(wpas_dbus_getter_networks);
DECLARE_ACCESSOR(wpas_dbus_getter_pkcs11_engine_path);
DECLARE_ACCESSOR(wpas_dbus_getter_pkcs11_module_path);
DECLARE_ACCESSOR(wpas_dbus_getter_blobs);
dbus: Expose connected stations on D-Bus Make it possible to list connected stations in AP mode over D-Bus, along with some of their properties: rx/tx packets, bytes, capabilities, etc. Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com> Rebased by Julian Andres Klode <juliank@ubuntu.com> and updated to use the new getter API. Further modified by Andrej Shadura to not error out when not in AP mode and to send separate StationAdded/StationRemoved signals instead of changing signatures of existing StaAuthorized/StaDeauthorized signals. Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
2018-10-07 14:31:51 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_stas);
D-Bus: Add MAC address randomization endpoints Add D-Bus property: * MACAddressRandomizationMask: a{say} which configure random MAC address functionality in the Wi-Fi driver via netlink. Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
2019-10-18 01:03:51 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_mac_address_randomization_mask);
DECLARE_ACCESSOR(wpas_dbus_setter_mac_address_randomization_mask);
dbus: Add D-Bus property for current MAC address Since wpa_supplicant can change MAC address of the interface on its own (with randomization enabled) it makes sense to introduce MACAddress as a property of the interface and send notifications about its change. This allows other applications to just use D-Bus instead of both communicating over D-Bus with wpa_supplicant and listening to Netlink notifications for MAC changes. Signed-off-by: Andrzej Ostruszka <amo@semihalf.com>
2022-12-01 16:43:44 +01:00
DECLARE_ACCESSOR(wpas_dbus_getter_mac_address);
dbus: Expose connected stations on D-Bus Make it possible to list connected stations in AP mode over D-Bus, along with some of their properties: rx/tx packets, bytes, capabilities, etc. Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com> Rebased by Julian Andres Klode <juliank@ubuntu.com> and updated to use the new getter API. Further modified by Andrej Shadura to not error out when not in AP mode and to send separate StationAdded/StationRemoved signals instead of changing signatures of existing StaAuthorized/StaDeauthorized signals. Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
2018-10-07 14:31:51 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_sta_address);
DECLARE_ACCESSOR(wpas_dbus_getter_sta_aid);
DECLARE_ACCESSOR(wpas_dbus_getter_sta_caps);
DECLARE_ACCESSOR(wpas_dbus_getter_sta_rx_packets);
DECLARE_ACCESSOR(wpas_dbus_getter_sta_tx_packets);
DECLARE_ACCESSOR(wpas_dbus_getter_sta_tx_bytes);
DECLARE_ACCESSOR(wpas_dbus_getter_sta_rx_bytes);
dbus: Pass property description to getters/setters We'll use it later for global interface properties. Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-13 18:45:33 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_bss_bssid);
DECLARE_ACCESSOR(wpas_dbus_getter_bss_ssid);
DECLARE_ACCESSOR(wpas_dbus_getter_bss_privacy);
DECLARE_ACCESSOR(wpas_dbus_getter_bss_mode);
DECLARE_ACCESSOR(wpas_dbus_getter_bss_signal);
DECLARE_ACCESSOR(wpas_dbus_getter_bss_frequency);
DECLARE_ACCESSOR(wpas_dbus_getter_bss_rates);
DECLARE_ACCESSOR(wpas_dbus_getter_bss_wpa);
DECLARE_ACCESSOR(wpas_dbus_getter_bss_rsn);
DECLARE_ACCESSOR(wpas_dbus_getter_bss_wps);
DECLARE_ACCESSOR(wpas_dbus_getter_bss_ies);
DECLARE_ACCESSOR(wpas_dbus_getter_bss_age);
DBus: Add ANQP fields to BSS properties Add ANQP fields to the BSS properties to allow DBus clients to be notified and obtain the values when it changes. Signed-off-by: Damien Dejean <damiendejean@chromium.org>
2024-02-26 17:32:41 +01:00
DECLARE_ACCESSOR(wpas_dbus_getter_bss_anqp);
dbus: Pass property description to getters/setters We'll use it later for global interface properties. Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-13 18:45:33 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_enabled);
DECLARE_ACCESSOR(wpas_dbus_setter_enabled);
DECLARE_ACCESSOR(wpas_dbus_getter_network_properties);
DECLARE_ACCESSOR(wpas_dbus_setter_network_properties);
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
DBusMessage * wpas_dbus_handler_wps_start(DBusMessage *message,
struct wpa_supplicant *wpa_s);
WPS: Add WPS Cancel method over D-Bus interface Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-05-26 06:08:39 +02:00
DBusMessage * wpas_dbus_handler_wps_cancel(DBusMessage *message,
struct wpa_supplicant *wpa_s);
dbus: Pass property description to getters/setters We'll use it later for global interface properties. Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-13 18:45:33 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_process_credentials);
DECLARE_ACCESSOR(wpas_dbus_setter_process_credentials);
DECLARE_ACCESSOR(wpas_dbus_getter_config_methods);
DECLARE_ACCESSOR(wpas_dbus_setter_config_methods);
D-Bus: Add WPS device name as property Signed-off-by: Avichal Agarwal <avichal.a@samsung.com> Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com> Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2016-12-21 13:24:20 +01:00
DECLARE_ACCESSOR(wpas_dbus_getter_wps_device_name);
DECLARE_ACCESSOR(wpas_dbus_setter_wps_device_name);
D-Bus: Add WPS manufacturer as property Signed-off-by: Avichal Agarwal <avichal.a@samsung.com> Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com> Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2016-12-21 13:24:21 +01:00
DECLARE_ACCESSOR(wpas_dbus_getter_wps_manufacturer);
DECLARE_ACCESSOR(wpas_dbus_setter_wps_manufacturer);
D-Bus: Add WPS model name as property Signed-off-by: Avichal Agarwal <avichal.a@samsung.com> Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com>
2016-12-21 13:24:22 +01:00
DECLARE_ACCESSOR(wpas_dbus_getter_wps_device_model_name);
DECLARE_ACCESSOR(wpas_dbus_setter_wps_device_model_name);
D-Bus: Add model number in WPS property Signed-off-by: Avichal Agarwal <avichal.a@samsung.com> Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2016-12-21 13:24:23 +01:00
DECLARE_ACCESSOR(wpas_dbus_getter_wps_device_model_number);
DECLARE_ACCESSOR(wpas_dbus_setter_wps_device_model_number);
D-Bus: Add device serial number in WPS property Signed-off-by: Avichal Agarwal <avichal.a@samsung.com> Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2016-12-21 13:24:24 +01:00
DECLARE_ACCESSOR(wpas_dbus_getter_wps_device_serial_number);
DECLARE_ACCESSOR(wpas_dbus_setter_wps_device_serial_number);
D-Bus: Add DeviceType in WPS property Signed-off-by: Avichal Agarwal <avichal.a@samsung.com>
2016-12-21 13:24:25 +01:00
DECLARE_ACCESSOR(wpas_dbus_getter_wps_device_device_type);
DECLARE_ACCESSOR(wpas_dbus_setter_wps_device_device_type);
dbus: Add an interface configuration entry to set the WPS methods It is thus possible to restrain WPS methods to prefered ones, like PBC only, etc. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2014-10-03 08:10:33 +02:00
dbus: Add new interface property to get connected mesh peers Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-07-18 09:07:56 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_mesh_peers);
dbus: Add new interface property to get mesh group Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-07-18 09:07:57 +02:00
DECLARE_ACCESSOR(wpas_dbus_getter_mesh_group);
dbus: Add new interface property to get connected mesh peers Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2017-07-18 09:07:56 +02:00
dbus: Emit more information over D-Bus Allows informing the connection manager of additional information on CQM events. Allows the connection manager to request the same information on demand by using the existing "SignalPoll" method. * Add new property "SignalChange"         * Add storage for wpa_signal_info into wpa_supplicant context           object         * Copy memory from event to context object on CQM Event * Write a common conversion method to be used by both "SignalPoll" and   this property Signed-off-by: David Ruth <druth@chromium.org>
2022-12-01 00:33:10 +01:00
DECLARE_ACCESSOR(wpas_dbus_getter_signal_change);
dbus_new: Add DBus TDLS methods Add DBus methods for TDLS operations similar to those available for the control interface. This includes Discover, Setup, and Teardown commands. While here, add a method to query the TDLS link status and add a DBus method for it. Tested with CONFIG_TDLS enabled, on a TDLS-enabled host and peer capable of TDLS: dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \ /fi/w1/wpa_supplicant1/Interfaces/0 \ fi.w1.wpa_supplicant1.Interface.TDLSStatus string:<peer-mac-address> yields: string "peer does not exist" dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \ /fi/w1/wpa_supplicant1/Interfaces/0 \ fi.w1.wpa_supplicant1.Interface.TDLSDiscover string:<peer-mac-address> yields no error dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \ /fi/w1/wpa_supplicant1/Interfaces/0 \ fi.w1.wpa_supplicant1.Interface.TDLSSetup string:<peer-mac-address> yields no error dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \ /fi/w1/wpa_supplicant1/Interfaces/0 \ fi.w1.wpa_supplicant1.Interface.TDLSStatus string:<peer-mac-address> yields: string "connected" after TDLS completes dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \ /fi/w1/wpa_supplicant1/Interfaces/0 \ fi.w1.wpa_supplicant1.Interface.TDLSTeardown string:<peer-mac-address> yields no error dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \ /fi/w1/wpa_supplicant1/Interfaces/0 \ fi.w1.wpa_supplicant1.Interface.TDLSStatus string:<peer-mac-address> yields: string "peer not connected" Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-11-11 21:13:55 +01:00
DBusMessage * wpas_dbus_handler_tdls_discover(DBusMessage *message,
struct wpa_supplicant *wpa_s);
DBusMessage * wpas_dbus_handler_tdls_setup(DBusMessage *message,
struct wpa_supplicant *wpa_s);
DBusMessage * wpas_dbus_handler_tdls_status(DBusMessage *message,
struct wpa_supplicant *wpa_s);
DBusMessage * wpas_dbus_handler_tdls_teardown(DBusMessage *message,
struct wpa_supplicant *wpa_s);
dbus: Add method to enable channel switching with a TDLS peer This patch adds "TDLSChannelSwitch" dbus method on "fi.w1.wpa_supplicant1.Interface" interface to enable channel switching with a TDLS peer. Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2017-05-01 06:05:37 +02:00
DBusMessage *
wpas_dbus_handler_tdls_channel_switch(DBusMessage *message,
struct wpa_supplicant *wpa_s);
dbus: Add method to disable channel switching with a TDLS peer This patch adds "TDLSCancelChannelSwitch" dbus method on "fi.w1.wpa_supplicant1.Interface" interface to disable channel switching with a TDLS peer. Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2017-04-13 14:09:01 +02:00
DBusMessage *
wpas_dbus_handler_tdls_cancel_channel_switch(DBusMessage *message,
struct wpa_supplicant *wpa_s);
dbus_new: Add DBus TDLS methods Add DBus methods for TDLS operations similar to those available for the control interface. This includes Discover, Setup, and Teardown commands. While here, add a method to query the TDLS link status and add a DBus method for it. Tested with CONFIG_TDLS enabled, on a TDLS-enabled host and peer capable of TDLS: dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \ /fi/w1/wpa_supplicant1/Interfaces/0 \ fi.w1.wpa_supplicant1.Interface.TDLSStatus string:<peer-mac-address> yields: string "peer does not exist" dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \ /fi/w1/wpa_supplicant1/Interfaces/0 \ fi.w1.wpa_supplicant1.Interface.TDLSDiscover string:<peer-mac-address> yields no error dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \ /fi/w1/wpa_supplicant1/Interfaces/0 \ fi.w1.wpa_supplicant1.Interface.TDLSSetup string:<peer-mac-address> yields no error dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \ /fi/w1/wpa_supplicant1/Interfaces/0 \ fi.w1.wpa_supplicant1.Interface.TDLSStatus string:<peer-mac-address> yields: string "connected" after TDLS completes dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \ /fi/w1/wpa_supplicant1/Interfaces/0 \ fi.w1.wpa_supplicant1.Interface.TDLSTeardown string:<peer-mac-address> yields no error dbus-send --system --dest=fi.w1.wpa_supplicant1 --print-reply \ /fi/w1/wpa_supplicant1/Interfaces/0 \ fi.w1.wpa_supplicant1.Interface.TDLSStatus string:<peer-mac-address> yields: string "peer not connected" Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-11-11 21:13:55 +01:00
dbus: Add support for vendor specific elements The new methods are 1. VendorElemAdd "i" "ay" i=integer ay=array of bytes 2. VendorElemGet "i" i=integer (output array of bytes) 3. VendorElemRem "i" "ay" i=integer ay=array of bytes These provide functionality similar to the control interface commands VENDOR_ELEM_ADD, VENDOR_ELEM_GET, and VENDOR_ELEM_REMOVE. Signed-off-by: Avichal Agarwal <avichal.a@samsung.com> Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com> Signed-off-by: Kyeong-Chae Lim <kcya.lim@samsung.com> Signed-off-by: Mayank Haarit <mayank.h@samsung.com> Signed-off-by: Dilshad Ahmad <dilshad.a@samsung.com> [VendorElemGet to return array of bytes instead of string; cleanup] Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-04 06:27:27 +01:00
DBusMessage * wpas_dbus_handler_vendor_elem_add(DBusMessage *message,
struct wpa_supplicant *wpa_s);
DBusMessage * wpas_dbus_handler_vendor_elem_get(DBusMessage *message,
struct wpa_supplicant *wpa_s);
DBusMessage * wpas_dbus_handler_vendor_elem_remove(
DBusMessage *message, struct wpa_supplicant *wpa_s);
dbus: Add SaveConfig to update configuration file This is similar to SAVE_CONFIG on control interface, which allow users to update the configuration file. Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com> Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2015-11-03 08:01:27 +01:00
DBusMessage * wpas_dbus_handler_save_config(DBusMessage *message,
struct wpa_supplicant *wpa_s);
dbus: Fix a typo in function name (invald -> invalid)
2010-01-01 20:52:29 +01:00
DBusMessage * wpas_dbus_error_invalid_args(DBusMessage *message,
const char *arg);
dbus: Move some of conditional WPS code into separate files
2009-12-20 20:04:40 +01:00
DBusMessage * wpas_dbus_error_unknown_error(DBusMessage *message,
const char *arg);
D-Bus: Simplify out-of-memory reporting There is no need to have separate wpa_printf() and different error message strings for the unlikely out-of-error messages. Use a helper function, wpas_dbus_error_no_memory(), to get consistent behavior with a one-line call. Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-01 21:36:52 +01:00
DBusMessage * wpas_dbus_error_no_memory(DBusMessage *message);
dbus: Move some of conditional WPS code into separate files
2009-12-20 20:04:40 +01:00
DBus: Add ability to report probe requests Some applications require knowing about probe requests to identify devices. This can be the case in AP mode to see the devices before they connect, or even in P2P mode when operating as a P2P device to identify non-P2P peers (P2P peers are identified via PeerFound signals). As there are typically a lot of probe requests, require that an interested application subscribes to this signal so the bus isn't always flooded with these notifications. The notifications in DBus are then unicast only to that application. A small test script is also included. Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 20:13:38 +02:00
DBusMessage * wpas_dbus_handler_subscribe_preq(
DBusMessage *message, struct wpa_supplicant *wpa_s);
DBusMessage * wpas_dbus_handler_unsubscribe_preq(
DBusMessage *message, struct wpa_supplicant *wpa_s);
wpa_supplicant: new DBus API implementation This patch implements the new DBus API. Both, the new and the previous API may work concurrently and may be turned on or off separately in .config file. Some features of the new API are: - more wpa_supplicant's events are signaled with DBus signals, - introspection data (requires libxml2 and may be disabled), - CurrentBSS and CurrentNetwork properties, - PropertyChanged signal for most of properties, - Relatively easy to extend. .config options for the new API are: CONFIG_CTRL_IFACE_DBUS_NEW=y and CONFIG_CTRL_IFACE_DBUS_INTRO=y for introspection. This commit misses couple of parts from the full implementation (these are still under review): - fetching all configuration parameters for learning WPS information - scan result BSS add/remove notification (register_bss() and unregister_bss() notification callbacks)
2009-11-09 22:51:59 +01:00
#endif /* CTRL_IFACE_DBUS_HANDLERS_NEW_H */
Reference in a new issue Copy permalink