We currently don't need it actively and it is easy to re-enable if
needed. Due to spawn chunks simulation it is not really idling either.
Change-Id: I2e4e5ff2271fd61ee1affec27a614244d4a87fcf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10173
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This actually allows disabling a service for the first time, since the
configuration structure for the service is created irrespective of the
enable option.
Change-Id: I08e5e67565d6fe210fb0f65600b8750433ce4712
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10175
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This will hopefully prevent failures on system deploys where DNS is
briefly not available, so git(1) fails to resolve github.com. Thanks
flokli for the tip.
Change-Id: I6096e9f3655cbe28ca2a71142de22337814e0be1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10172
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This doesn't work correctly in unstable (there's a few suspicious
commits, but I haven't debugged it further yet). However, this tool is
critical for me, hence the rollback.
Change-Id: I1f1e18775324b4aa60a4f3c65abdd51dea596cad
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10167
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
This now exists in tvix-store directly, as NixHTTPPathInfoService, and
contrary to this version, also validates signatures.
Change-Id: Ib6ca161e40d627b7d9741839fc849f2392f422da
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10155
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This allows setitng the trusted-public-keys URL parameter to a
(whitespace-separated) list of public keys.
NARInfo files retrieved need to contain a valid signature.
Change-Id: Ifd6580b723cbae3182e9cadfa54f1ca2b41d6599
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10153
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Introduce an Option<Vec<narinfo::PubKey>>, configurable with a
`set_public_keys` method.
If set, this configures NixHTTPPathInfoService to validate signatures.
Change-Id: I157c5e13c41fc9bfd40b0655381fb4cf33900868
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10152
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This makes it easy for each PubKey to check if a given Signature is
correct for a given fingerprint.
Change-Id: I56e6211d133f74f390fd1ae3ae799eef12221904
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10151
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This represents a ed25519 public key and "name".
These are normally passed in the `trusted-public-keys` Nix config option,
and consist of a name and base64-encoded ed25519 pubkey, separated by a `:`.
Change-Id: I9ab4b3e0e5821805ea6faf2499626630fc5a3f0a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10150
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Just call this Error, we can infer from the package what error this is.
Change-Id: I5df25d2873ec739c49c08804f35562c84c222e06
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10149
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Ensure the initially communicated NarHash/NarSize from the NarInfo
matches what we read, and don't return a PathInfo message if there's
a mismatch.
Also move the buffering layer around a bit.
Change-Id: I68c60ecfaf0f9cd5edacea648437ecb0c9729251
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10148
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
An error in the PathInfoService request can appear in case the
underlying request returns an error.
We shouldn't panic and bork the fuse mount, but instead return an IO
error.
Change-Id: I2daeae629e1627d06adcd7b82ddb76c50c602212
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10154
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This removes the wonky hack with detecting the bottom right window,
and gives me saner, unified handling of this display in the tab
bar (of which there is only one!)
Change-Id: Id21c6b2472d0c89fc4d000a10a9e90d2ddba86b6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10165
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Enables the new autosubmit bot, albeit without rebase
functionality (this will be a separate change).
Change-Id: Ia42a4f08c0edca5e6cc8bf4770ec24dbf16a5db7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10132
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Adds a small Rust program that connects to the Gerrit API and uses a
simple algorithm to figure out which changes should be submitted, and
submits them:
* it fetches all changes the Gerrit query API considers
submittable (i.e. all requirements fulfilled), and that have the
`Autosubmit` label set
* it filters these changes down to those that are _actually_
submittable (in Gerrit API terms: that have an active Submit button)
* it filters out those that would submit ancestors that are *not*
marked with the `Autosubmit` label
* it submits the longest chain
After that it just loops.
There is no rebasing logic yet for when it "runs out" of submittable
changes, but it will not be difficult to add.
Relates to b/333.
Change-Id: Ib91ecf2c45b178e8c64ff7b2174d617d4c45efe2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10131
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: ezemtsov <eugene.zemtsov@gmail.com>
Autosubmit: tazjin <tazjin@tvl.su>
* picked avrdude from stable channel
* removed override for texlive, as the upstream fix is merged
* picked awscli2 from stable channel
* bump tdlib to 1.8.21 (new minimum for telega.el)
* tvix/turbofetch: switch to nixpkgs-native mechanism for
CARGO_MANIFEST_LINKS (whatever that is)
Change-Id: Ic695721b5ca750b89d21cab7a257e1db682b23c0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10083
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
We should restrict this to alphanumeric mostly, and we definitely don't
want newlines.
Not entirely sure about the exact additionally allowed characters
outside of alphanumeric, but this can always be extended further.
Change-Id: I1357e79e553f2df2fa97792889f63f0f35d50ed5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10147
Reviewed-by: edef <edef@edef.eu>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
BASE64.decode_mut panics if we're passing data that has the wrong size.
Do the size check first and error out there.
Also update the error, and talk about b64-encoded sizes.
Change-Id: I290f80a37d48526a30bf1df9d1d9fe34865008eb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10146
Tested-by: BuildkiteCI
Reviewed-by: edef <edef@edef.eu>
Autosubmit: flokli <flokli@flokli.de>
No need to hardcode magic numbers here, we have a constant for that.
Change-Id: I67b671c0c4bb7c3bfb001e9c36499f31873ee717
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10145
Reviewed-by: edef <edef@edef.eu>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
`lib.types.attrs` is deprecated in favor of `lib.types.attrsOf
lib.types.anything` because it doesn't merge attribute sets
/recursively/. `attrsOf` and `anything` do, the former is used to ensure
that the top value is an attribute set as expected by irccat.
Change-Id: I2a9d943a06c8f99f7d6d20c9944288e854924bff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10129
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
While we are at it, rename disk-checkup.nix to btrfs-auto-scrub.nix and
move it into //ops/modules. I originally wanted to have additionally
disk health related services in that module, but the btrfs scrub
functionality is nicely self-contained and reusable, so I think it makes
sense to have this in a more central location.
Change-Id: Iabdd62838eef009540ca71abafd921afda2a9b47
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10128
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Network configuration and initrd setup is basically the same as with
edwin, but we are using md for Software RAID this time as well as LVM
over two partitions with LUKS:
- sda2 <-- RAID1 --> sdb2 (boot-raid)
└ boot partition, ext4 (encrypted-container-raid)
- sda3 <-- RAID1 --> sdb3
└ LUKS container
└ Volume Group vgmain
├ Logical Volume vgmain/swap
│ └ swap
└ Logical Volume vgmain/root
└ btrfs
So we no longer rely on btrfs raid1 due to question marks over its
reliability (I personally did not have any problems though). This also
means that we have less LUKS containers we need to unlock when
booting (kind of neglible improvement). The biggest improvement is that
we have redundancy for the swap, so a disk failure shouldn't cause
memory corruption/loss.
Change-Id: I14f065b659857415917d9a60a7ec019e687f8d1c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10127
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
These settings would also be applied to a machine that'd replace edwin,
so it's useful to have them outside edwin's default.nix.
Change-Id: I4e8f464118a103645e53909a87c6ee4446022fa3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10125
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This introduces a new structure, as activities are moved to a separate
AWS Account for reasons (tm).
Change-Id: Ic310eca2dc0d4ee81bae8944238b26910067336a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10124
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This fixes a future clippy lint.
Change-Id: Ic830e94ef23595580c1037f10878c76bbb546dd9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10110
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
This removes everything related to workspaces, as well as the current
RandR configuration, creating a (cleaner) slate for switching to tabs.
This was supposed to be committed earlier, but got broken by
clbot (see b/333).
Change-Id: I2d110bca0d6629a505699210f0aba12882f83d48
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10115
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Sets up tab-bar-mode for EXWM, and adds simple initial configuration
and shortcuts to make it behave sanely. I had to assign tab switching
shortcuts myself, as the EXWM input key stuff doesn't work correctly
with the built-in way of setting these shortcuts in tab-bar-mode.
Change-Id: Icd96f03ae7bd2bd5f7c2d59f9aca7a1ca2e7f788
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10116
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Adds an `exwm-assign-workspaces` function that automatically creates
and assigns workspaces to each currently connected monitor. The first
workspace (index 0) is always on the primary monitor.
This function should be idempotent and can be called at any point to
synchronise X outputs and what EXWM is displaying on them.
This works because tabs are disconnected from workspaces completely,
so I don't have to care about what's going on on other workspaces
anymore.
Still missing:
* functions to connect/disconnect outputs
* switching to other outputs from within emacs commands (i.e. without
the mouse)
Change-Id: I7c24aa1b45218fe35de6939e799852b5d11d1272
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10119
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This seems to actually sort of work with tab-bar-mode.
Change-Id: I7b12b69ec7413ce9b9e1650d8629db8aca8a1796
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10117
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This one is a bit stupid because I couldn't figure out a way to
determine the active workspace. It's definitely possible (either
through some XCB calls, or through state management in screen change
hooks), but for now this is fine.
Change-Id: I5e4c531b248caa0021664bad9dc196bef60cfbac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10122
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
By default, this will be the (only) remaining monitor. In N>2
situations, ask the user.
Change-Id: Id68fcf60d56d0414d1072b8ffeef72c608678f52
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10121
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Uses a bunch of weird xrandr invocations and completing reads to
configure screens the way I want.
Note that this has a known bug where disconnecting a primary screen
will *not* make one of the remaining screens primary.
Change-Id: Ide5322df446685cc4740d4ddd7b6ca8682375050
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10120
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This commit adds Thunk::unwrap_or_clone(), which uses
Rc::try_unwrap() to avoid cloning the Value out of a an Rc which has
only one strong reference.
Change-Id: Icacefe0c823dcddf046d90c0c5cd5ed59fe976d4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10037
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
Change-Id: Ibddaa111a5b7a86c42dbe153ae8e53f9a5601a54
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10112
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
This allows seeing a PathInfo as a nix_compat::narinfo::NarInfo<'_>.
It doesn't allocate any new data, but the NarInfo<'_> view allows us to
access things like signature verification, or rendering out
(alternations of this) as strings.
Change-Id: Id0d8d7feeb626ee02c3d8a4932f24ace77022619
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10108
Reviewed-by: edef <edef@edef.eu>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This is useful when creating a new Signature struct where the individual
elements are already parsed.
Change-Id: Ie33c66287641951e7a030aaa1e7ff0a86b2628ac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10111
Reviewed-by: edef <edef@edef.eu>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
We can simply use .to_owned() on that thing afterwards if we want to
construct an owned StorePath.
Change-Id: I0f3e2e4434b99ee522f2a7dbfa391e13a987479c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10105
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: edef <edef@edef.eu>
Tested-by: BuildkiteCI
We always know this needs to end with a .drv, and fail parsing if it
doesn't, so there's no need to hang onto these 4 bytes.
This will make it much easier to synthesize a NarInfo<'_> later on from
a PathInfo proto, because we don't have to make this ".drv" appear out
of thin air.
Change-Id: Id95e7fd937d7c9a420a39b5a4bab73985640ca3b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10084
Tested-by: BuildkiteCI
Reviewed-by: edef <edef@edef.eu>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
These were used to format to and parse from strings.
Move this to the CAHash and NixHash structs directly, and be explicit in
the name about which encoding for digests is used.
For output path calculation, nix encodes the nixpaths in hex, but for
writing out NARInfos, it's using nixbase32.
Change-Id: Ia585a76a3811b2609e7ce259fda66a29403b7e07
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10079
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Something changed in the machinery and broke the overriding. I didn't
notice this, as a I was temporarily using an unpatched EXWM.
Change-Id: I1a4e8ea63bd116d86a430e680c2b631474e9a0fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10047
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
