With this change, entering just "whitby.tvl.fyi" or "sanduny.tvl.su"
in a browser will redirect users to their machine configurations.
Change-Id: Ibf076a469bcce073e1b1970aa568d6fe16a5c75a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5304
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
This needs to be present on all machines that run ACME stuff.
I've switched the address for a .su one because I have a catchall for
these.
Change-Id: I7af8e1f1cb2fcfbcba4b7d1930ed0edef0106d72
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5306
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This changes the structure of secrets.nix a bit to split between
secrets for whitby, and secrets for all TVL machines.
Change-Id: I791f0ce42a16b33051e24a7a6c5b153761ed9eb3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5300
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
This will be an additional web host / fallback git server for whitby
incidents.
Change-Id: Icd6f7ce574ffd520b5783a50ff317feed7b71fc6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5297
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Rather than defining all system users inline on whitby, move them into
a module that can be imported on multiple machines.
Configuration for terminfos that we've added follows along.
Note that while doing this I've disabled logins for riking and isomer
since they are currently inactive in TVL.
Change-Id: Id18031d355afc34079c5e6e49dc6943e61809a8f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5298
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
cgit has its own module now
Change-Id: I9b4cc322374517b8bd3db43345831e2bf43c4bb1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5295
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The ancient `//web/cgit-taz` path stems from the time I had
code.tazj.in serving my initial version of the depot.
I've been meaning to clean this up for forever, so here we go.
Note that this leaves the git-serving module in a strange state where
it only deals with josh. I'll rename it accordingly.
Change-Id: I47ed1e9d90958299b5440a18a1b9075274754e33
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5294
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
* //nix/buildLisp: re-enable CCL, as the crash has been fixed upstream,
although it is unclear what exactly caused / fixed it.
* //ops/whitby: the kitty build broke upstream, so we can't install the
terminfo on whitby for a bit.
Change-Id: I5710acbe837fbc936e334b2e81f9cf00ed6ae280
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5274
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
I am trying to publish this to crates.io, and `mq` is already taken up
by what seems to be a dead project.
Change-Id: I14d1f5f31f167fde954d9c1e39fc9fec5f4c3d10
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5234
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Same trick as in the last commit, trying to hit the right revision.
Change-Id: I0af9e88b4d2fd8239a7819dbe0da13f26cca8d6b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5233
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
... and update some outdated stuff in the README while we're at it.
Change-Id: Ib3a12596bd1ba61e91ac6e1d37106b616da3030d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5232
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
The previous version had a CVE.
As part of this upgrade, the handling of errors inside of the Nix
crate changed, which we now accommodate.
Change-Id: Iad9a473c1782e0d79919cb5dc3f76316852d8a16
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5226
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
The previous mem::unitialized method was deprecated in favour of this
struct which carries information about the initialisation state
forward to the compiler.
Change-Id: Ib5f5d1ad91f9957b18eebabc1048f8649bc74049
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5225
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is necessary for the nginx prometheus exporter to work
Change-Id: I2343d6f5d3d6d6772777d5e14426a537aa1c8ef7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5127
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Tested-by: BuildkiteCI
Might be nice to look at rates of requests etc.
Change-Id: I4d12ab0c1a555793e803de4a9614e616951a94e5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5125
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
This isn't actually used by anything that would use agenix, but this
seems like a vaguely sensible way of sharing the token with other people
regardless.
Anyone who finds this commit and wants to be added to the telegram
channel where the alerts go, lmk.
Change-Id: I06d6ed2d4bec099cbf68ede8fd00a5e6f4e7bc60
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5124
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Since our blog index is on the index page, this makes slightly more
sense.
Change-Id: I7b8164490c133e23d892abef21275f8bfed50b66
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5123
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
This was already happening without the trailing slash, but needs to
happen separately with it.
Fixes: b/172
Change-Id: Ic3423fd7a2eaf76a073badd80965cee953df4ce9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5121
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
This means it will end up in journaldriver.
Change-Id: I66f781085b5dac9946b3b9a2bf30e447863e1213
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5122
Reviewed-by: lukegb <lukegb@tvl.fyi>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
There is no need for this step to be part of the static pipeline (it
should not run if the build fails anyways).
Change-Id: I71400a452d6f8f4708d146b346eaffda5da2f766
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5049
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: ezemtsov <eugene.zemtsov@gmail.com>
This will create `build-chunk-$n.json` files for steps that should run
_before_ duck, and `post-chunk-$n.json` files for steps that should
run after duck.
The post steps are not yet uploaded to Buildkite, but we also don't
have any right now.
Change-Id: I7e1b59cf55a8bf1d97266f6e988aa496959077bf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5047
Tested-by: BuildkiteCI
Reviewed-by: ezemtsov <eugene.zemtsov@gmail.com>
Autosubmit: tazjin <tazjin@tvl.su>
Using this instead of a conditional leads to nicer output in the UI,
but has no semantic difference.
Change-Id: I5b368d663f417d256e4792d2d46b84fc50d42d0e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5045
Reviewed-by: ezemtsov <eugene.zemtsov@gmail.com>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
This step is independent of the build result and can be scheduled at
the beginning while pipeline eval is still in progress.
Change-Id: I2ee268e4c333efa654dcb12c0b1562b43231d241
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5044
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: ezemtsov <eugene.zemtsov@gmail.com>
Previously we only stored the drvmap, but we will also need the build
chunks to refactor the generation of dynamic post-steps.
Change-Id: I256fffe13af8f8c4521835257f5d87dda323b248
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5043
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: ezemtsov <eugene.zemtsov@gmail.com>
This CI pipeline in Buildkite verifies the external (josh-provided)
view of the depot at //views/kit.
See https://buildkite.com/tvl/tvl-kit
Note that this always triggers a build of HEAD. This is because we
don't know the transformed commit ID, and we currently have no way to
pass a ref through. The pipeline is configured to skip intermediate
builds.
I asked Buildkite for some ideas on how to improve this, lets see.
Change-Id: I6c60fb1ea7606c1c90219ef04fd7bada64661529
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5010
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
This is no longer TVL-specific and should live here with the other
generalised stuff.
Change-Id: I95a1b4c0321f34812162d6fd40568269abf639dd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5006
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: ezemtsov <eugene.zemtsov@gmail.com>
Removes all TVL-specific values in favour of environment variables
supplied by Buildkite.
This makes it possible to reuse this script outside of TVL.
Change-Id: Ic543bc41e4c81e65ee349ad241c515231e97ab30
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5005
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: ezemtsov <eugene.zemtsov@gmail.com>
Some companies do not know the 'cl' term. They do know of 'change' and
would maybe not like to introduce one more synonym.
This cl introduce an optional entry 'gerritChangeName' in
besadii.json. The string has to match `^[a-z0-9]+$` for readability.
Change-Id: Id70fcb1e45158869f88bf37669be49b8b8a3b295
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4825
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: asmundo <asmundo@gmail.com>
The cookie secret in the encrypted file was too long, because the
generation command in the oauth2_proxy docs is also wrong. Should
probably fix that upstream as well.
Also noticed that an extra '2' snuck into the service name and fixed
that.
Change-Id: I9a344a75993ab1f98299a8d45e7f5b2e146b7fc5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4957
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This changes the logic for build pipeline generation to inspect
an (optional) parentTargetMap attribute which contains the derivation
map of a target commit.
Targets that existed in a parent commit with the same drv hash will be
skipped, as they are not considered to have changed.
This does not yet wire up any logic for retrieving the target map from
storage, meaning that at this commit all targets are always built.
The intention is that we will have logic to fetch the target
map (initially from Buildkite artefact storage), which we then pass to
the depot via externalArgs when actually generating the pipeline.
Change-Id: I3373c60aaf4b56b94c6ab64e2e5eef68dea9287c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4946
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Always create a structure that maps all targets to derivations, and
persist it as a JSON file.
This relates to some of the ideas expressed in:
https://docs.google.com/document/d/16A0a5oUxH1VoiSM8hyFyLW0WiUYpNo2e2D6FTW4BlH8/edit
The file is always uploaded to Buildkite as an artifact. This allows
for retrieving it based on the commit ID in a Buildkite GraphQL query.
By default, Buildkite stores artefacts for 6 months. Storage location
can be overridden (with custom retention) through some environment
variables, but for now at TVL the Buildkite-managed storage is fine.
See also: https://buildkite.com/docs/pipelines/artifacts
In the subsequent filtering implementation, when diffing commits
across a time-range that exceeds artefact retention time, we should
simply default to building everything.
Change-Id: I6d808461cd1c1fdd6983ba8c8ef075736d42caa7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3662
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Since we now group patchsets inside of Buildkite, the results are no
longer guaranteed to be for the right patchset.
There might be some metadata passed in from Gerrit that would let us
do this with the commit ID instead, but I haven't checked.
Change-Id: I5b74a17697511160fcc89d3dbef23517d974dc6f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4890
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Autosubmit: tazjin <tazjin@tvl.su>
I'm not sure where the previous list originated, but it was missing
some officially documented statuses. However, the API definitely
returns statuses that are documented to only appear in other types, so
this commit simply maps ALL statuses that Buildkite has documented for
any type.
Also adds a log statement in case we encounter a brand new, unknown,
undocumented status.
Change-Id: Iff003a3bd2608702019ae0f4137958435ad0856f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4888
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
... and remove a spammy log statement.
This changed in besadii a while ago and lead to the behaviour of
failing silently, instead of failing with an error saying "undefined
undefined".
Note that with this change merged the plugin probably still won't work
again, but it gets us a step closer to the real error.
Change-Id: I3db25d246f4b1c634d316cd92574e27fb220d769
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4887
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Currently Gerrit is configured to copy forward the scores of the
'Verified' label if the tree of the commit does not change (e.g. only
author information or commit message is modified).
Besadii still triggers builds for these patchsets though. With this
change it will inspect the (previously ignored) "kind" of the patchset
and skip patchsets with the same tree as their predecessor.
See Gerrit docs for the semantics of "kind":
https://gerrit-review.googlesource.com/Documentation/json.html#patchSet
Note that an argument can be made that we should do the exact opposite
- stop carrying over 'Verified' at all and always build all patchsets.
I think this depends on whether we intend to use commit metadata in CI
runs at all. Adding a few people to the review for opinions.
Change-Id: I48a96a1ad1e07d92330d84e5cfdc820a39395297
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4867
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: asmundo <asmundo@gmail.com>
Reviewed-by: sterni <sternenseemann@systemli.org>
Adds more things I keep using via nix-shell, as well as the
deploy-whitby script (which is independent of a particular depot
checkout).
Change-Id: I36f87de7645768a05268c90ba9b3ab833bacca05
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4881
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
nvd only shows us changed versions of packages, as well as
added/removed packages, which means that for the majority of depot
packages nothing will be displayed
however, the current output of nix-diff is not usable anyways, so
having something that can be looked at is better than nothing
Change-Id: Iefbd8139c7ccf5c88ed1209897abdb2ae9302e91
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4868
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
The comment posted to the Gerrit change do not need to contain the CL
number as it is given by the context of the Gerrit UI.
Change-Id: I172645e7f4d82e2fbebe179578babd42ea29737f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4826
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: asmundo <asmundo@gmail.com>
When `findSystem` attempts to evaluate `system.config.networking.hostName`,
diogenes (because I've refactored its definition) causes the following error:
> You're trying to declare a value of type `string'
> rather than an attribute-set for the option
> `system'!
Change-Id: Ib23cb9aa9cadc1f71ad3369c903e587762d12cc0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4830
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Autosubmit: wpcarro <wpcarro@gmail.com>
Tested-by: BuildkiteCI
Adds a feature to emergency-stop deploys by simply running `touch
/var/lib/auto-deploy/stop`.
This can be useful in some situations, especially if there is a
process that reconciles service state (so that e.g. stopping the
unit's timer would be undone).
Change-Id: I233dfac365a578bfa4110eb605b50be079974ba4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4827
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: wpcarro <wpcarro@gmail.com>
The priority of binary caches is decided by the remotes in Nix (???),
and by default nix-serve (which is *very* slow) has a lower priority
than cache.nixos.org (which means that it will be preferred over the
faster cache for paths that exist on both).
To avoid this, override the hardcoded (????) priority by serving the
nix-cache-info response directly from nginx instead.
Change-Id: I15a2d6618386d16edaf69f1c9257a36bd72132d2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4823
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
This reverts commit 5e036ed9fc.
Reason for revert: This introduced a logic error since the remaining
step runs at the wrong point in the pipeline. Temporarily reverting to
having duplicated waits in order to clean up later.
Change-Id: Ifa6ece50dd22924f02efd7b790a5863ca1189af7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4841
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
The intent is to configure oauth2_proxy pointing at Keycloak to enable
usage with nginx auth_request directives.
I want to expose this as a function from within the module in which
nginx server configuration blocks can be wrapped, but the function for
that is currently a placeholder.
Change-Id: I5ed7deb9bf1c62818f516e68c33e8c5b632fccfe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4767
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
It looks like we won't need this for oauth2_proxy when combined with
nginx auth_request setups.
Change-Id: I2294aee6226b4f64a27bf6592c2d18092d0268cc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4766
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
Turns the anchor derivation into something that can actually be
built (a call creating a propagated build inputs file), and builds it.
This should fix the anchoring logic we have on canon.
Change-Id: If6a7662b82e2e396388980f65e332cf67a45b46e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4763
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: sterni <sternenseemann@systemli.org>
Without some kind of physical organisation it's a little difficult to
understand whether things are going "in" (supplying users to Keycloak)
or "out" (getting auth/user info from Keycloak).
Change-Id: I516501081e3448c81c710fcbc79cc68ad2a80f3b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4762
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
This now happens in //nix/buildkite instead
Change-Id: Ie9e239ee4f28ac34aa4d3279dac55d70a2cb9d86
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4764
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This client definition was previously nonsense. What happened is that
I accidentally imported the client as an OIDC client, which Keycloak
accepted because apparently those are the same entities on the API
level, and that ended up getting mangled into some broken hybrid shape
by Terraform.
This sets up the Buildkite provider again but with the correct
SAML configuration this time.
Change-Id: Id7ba318984d2fcc9e2ca91ed45ccbfd227278bbe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4731
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: tazjin <mail@tazj.in>
Produces more useful output and also makes for a good target for the
upcoming extraSteps logic.
Change-Id: Ifd389d433d9e27f97940a48999f4fba35646e37a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4727
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: sterni <sternenseemann@systemli.org>
Extracts the logic for generating our Buildkite pipeline (which has
been copy&pasted and slightly modified in some places outside of
depot) into a generic //nix/buildkite library.
This should cause no change in functionality.
Change-Id: Iad3201713945de41279b39e4f1b847f697c179f7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4726
Autosubmit: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
These records were previously configured manually in the GleSYS web UI
during our DNS outage (b/155).
Note that I could not find a way to `terraform import` these records
and have instead recreated the set and then cleaned up in the UI.
Change-Id: If7de9a7e6dad20953ba8b610589a62dce400e87b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4716
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
These records were previously configured manually in the GleSYS web UI
during our DNS outage (b/155).
Note that I could not find a way to `terraform import` these records
and have instead recreated the set and then cleaned up in the UI.
Since we often point things at whitby, I have extracted variables for
its IPs in this change.
Change-Id: I09fda94d3734e8aaa278fa858e160d046740da1e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4714
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
These records were previously configured manually in the GleSYS web UI
during our DNS outage (b/155).
Note that I could not find a way to `terraform import` these records
and have instead recreated the set and then cleaned up in the UI.
Change-Id: I2b7e0ed0931f50e7fa49c1f6e3400dfe958def04
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4713
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
Adds the secrets and some instructions for deploying the GleSYS
Terraform infrastructure.
Change-Id: I1a10f9cee7648d406b3d27ef45fc74b6923cbc30
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4712
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This was previously configured in the UI.
Change-Id: I68361b1489093b76736adab2e38ed7b474b10881
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4711
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This was previously configured in the UI.
Change-Id: Ib15b8ecca96d7814dc85d62199865b22bdb63f95
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4710
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This should never sit around locally the way it does now.
Change-Id: Icfbdaf1949d6d948a796a0759282ea6144af3621
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4709
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This file can be sourced (somehow, depending on the user) while
working with //ops/keycloak to get the relevant secrets.
Change-Id: Ibb3051c4b019f64824964475451c1c3996db6421
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4708
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Grafana was still pointing at the (now non-existent) CAS setup. This
changes the endpoints to use Keycloak instead and updates the client
secret.
Change-Id: Ib25d38330aba2ef6d894e8c33d86852c884ab5be
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4706
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
Generalize out a reusable mkSecrets function from the
secrets-tree-building that's happening in //ops/secrets, so the same
thing can happen in other places in the depot (I want to use it for my
personal infrastructure).
Change-Id: I059295c8c257d78ad7fa0802859f57c2c105f29b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4679
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: zseri <zseri.devel@ytrizja.de>
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Building nix derivations needs tar (provided by gnutar) and gzip on the
PATH in order to extract .tar.gz archives.
Change-Id: Ia2df7a3a770cfd342dfede58ad34e04805fbd1f8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4685
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: wpcarro <wpcarro@gmail.com>
This will be useful for things like panettone, pending a NixOS module
for oauth2-proxy (the upstream one is too complicated and doesn't
support what we need).
Change-Id: I4ca193e10a94a29b1fb9003e945896ff8eb61116
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4662
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Autosubmit: tazjin <mail@tazj.in>
Verified emails are required for some things, like e.g. oauth2_proxy
Change-Id: Ifb124be40d6d2863cd1b7ed5fbdfcf4827e8808c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4661
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: Profpatsch <mail@profpatsch.de>
This is still missing most of the client configuration etc., in part
due to bugs in the provider which are preventing resource imports.
Change-Id: Ic224ffc001f8e1fe6dcd47b7d002580fdf7b0774
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4628
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Note that the login.tvl.fyi WWW configuration is still kind of hanging
around until we've settled where Keycloak lives.
Change-Id: Iaca4e394a7371cafa3716ca66ef09c4eca5b1520
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4626
Autosubmit: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Gerrit has OAuth2 and email related secrets which now live in agenix
instead of a random file on disk.
Change-Id: I6220fbb7a2e2ec0102a900b4bcf6150b8b4d32ef
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4612
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Trialing this as an alternative to CAS that is a little easier to
configure and can help us delegate authentication to other OIDC
services.
Change-Id: Iad63724d349334910af8fed0b148e4ba428f796b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4608
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: lukegb <lukegb@tvl.fyi>
This provides the right Terraform provider with a wrapper in $PATH.
Change-Id: Idcb4fa89dff0161e8a73addfce81959e825c331e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4562
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
Unclear if this reformat is caused by the channel update or if this file
was ignored previously.
Change-Id: I3498ab181c7fff1b132419783e33a96f7bebfe42
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4520
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
If available, provide a link back to Gerrit on the overview page of a
build.
Uses the default style (i.e. style unset), which makes it
non-intrusive visually.
Change-Id: I4271d589d548015b75762fd0584f3958bfcc53e5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4442
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
The code in //users/wpcarro/tools/monzo_ynab/ynab/client.go was not
valid Go and has been commented out.
Change-Id: Icb4003607f30294dcbf60132eb7722702c7f0d84
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4400
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: Profpatsch <mail@profpatsch.de>
got into some kind of race with different patchsets of this CL
somehow, idk
Change-Id: I3dcdb708f141829b866fbd786483710b43ea9824
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4481
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
If we set this for canon, then stuff starts to fail in non-obvious ways.
Change-Id: I3bf38e29151c6066aaf4eba68ae387272d8a82c2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4463
Tested-by: BuildkiteCI
Autosubmit: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
apparently this chomps away at things inside of fragment strings
Change-Id: Ie60d52d101dc4281b3a62c228af076791e1c7928
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4462
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This makes it possible to annotate builds with a link back to Gerrit.
Change-Id: If351785d3b631b96753d41f417ca94bc7a95ac54
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4441
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
The branch key for buildkite builds isn't actually used to fetch if a
commit is given - instead, it's just a visual grouping of multiple
builds. This means we can just make the branch key cl/<cl number>, which
is the convention we already use to refer to CLs and gets us a nice
visual grouping of builds of successive patchsets of the same CL number,
even though the ref we're providing isn't a real ref.
Change-Id: Iaa9111297a88f965fda94cd8266240106f58a100
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4347
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Autosubmit: grfn <grfn@gws.fyi>
I'd like to be able to run extra CI steps that include running docker
containers (to integration test things like webapps that connect to a
database). To do this the buildkite agents themselves need permission to
do docker things.
Change-Id: I3c9a488708f0e12a508754ac41f04148ca7aedac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4408
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <mail@tazj.in>
diogenes "passed" CI because the file was named configuration.nix
(vestage from the NixOS default /etc/nixos/configuration). This CL fixes
some issues I encountered after running depot/bin/rebuild-system.
TL;DR:
- rename configuration.nix -> default.nix to trigger CI
- add diogenes to my systems
- add public SSH key
Change-Id: I24197b8936c201267db6f71f00099dce590eac1d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4388
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: tazjin <mail@tazj.in>
Autosubmit: wpcarro <wpcarro@gmail.com>
Submitted via IRC, instead of the usual Google Groups
due to email issues.
Change-Id: I71a2bdfd10b02370df61bbba4dabc2f45b6c1009
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4384
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <mail@tazj.in>
For modules that are gated behind a mkEnableOption, it's reasonable to
just provide them to all Depot-built nixos systems without requiring
people to explicitly import them. This defines a special module called
`default-imports.nix` which imports these modules (currently just
tvl-cache.nix and automatic-gc.nix, as I'm being rather conservative
adding things here to avoid breaking anyone's system), then provides
that module as one of the `modules` passed at the top-level
nixos/eval-config invocation.
Change-Id: I3be299ab10ae4c451ef11c514edb3c89318a2278
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4345
Tested-by: BuildkiteCI
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <mail@tazj.in>
Add a shared nixos module for configuring whitby as a binary nix cache,
and refactor tverskoy to use this module.
This is enabled via an option to pave the way for including it as an
import in all depot-generated nixos configs at some point in the future.
Change-Id: I6dcc0e8eb48b1ac34457666dceebeedd5da6c526
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4344
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Autosubmit: grfn <grfn@gws.fyi>
Don't notify reviewers ever on CI status changes, and only notify the
owner if the build fails.
Change-Id: If2cf63581b49e3de77181024ce8a4213031f4bd5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4337
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Autosubmit: grfn <grfn@gws.fyi>
This fix was recommended by Buildkite and is explained in the comment.
Change-Id: I3f1c1c07cba0b417857d69c021c8af4750d645c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4334
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The number of jobs in the depot pipeline is reaching the limits of the
Buildkite backend's ability for a single pipeline upload. Based on a
conversation with their support my understanding is that this has to
do with internal locking mechanisms at Buildkite.
To work around this, we can instead chunk the pipeline into several
smaller chunks that are uploaded serially.
This commit introduces logic to chunk the pipeline accordingly. The
chunk size chosen is 256 for now (a multiple of our number of agents,
which is useful if we can get builds from the first chunk to start
before the next ones are uploaded).
Note that this chunk size is significantly below even the current
number of targets (~460 as of this commit), but choosing a lower chunk
size might alleviate problems we've been seeing with timeouts during
pipeline uploads.
Change-Id: I77030aaf8b874c330218b78c77d15216e13b9af7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4332
Tested-by: BuildkiteCI
Reviewed-by: wpcarro <wpcarro@gmail.com>
Autosubmit: tazjin <mail@tazj.in>
https://cl.tvl.fyi/c/depot/+/4264 did move merging config with secrets
into ExecStart=, which is tracked in an RFE upstream:
https://github.com/systemd/systemd/issues/19604#issuecomment-989279884
We didn't link to this so far, neither in the commit message, nor in a
comment.
Let's add a comment, so people know when we can undo this.
Change-Id: I7bed370b671093bb876592b4dccd562f1c256cd2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4326
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: grfn <grfn@gws.fyi>
We can gcroot the derivation files and drop this step, but have
elected not to do so for the moment, see cl/3436.
Change-Id: I993a1f3921e9f21e18fa260e76d3dd15ffa556bd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/4327
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <mail@tazj.in>
By default besadii will set the `Verified` label in Gerrit. This adds
a config option to set a different label instead if desired.
Co-authored-by: Vincent Ambo <mail@tazj.in>
Change-Id: I254159e46994e01182987ed5e5e26e27c57f46ce
Currently in NixOS configuration using agenix secrets there is no
build time validation of secret paths - things fail at runtime (system
activation).
To prevent that, this CL makes the secrets part of the tree based on
the same configuration file used by agenix itself.
This guards against:
* agenix secrets.nix definition for a non-existent file
* age.secrets value in a NixOS config for a non-existent secret
Change-Id: I5b191dcbd5b2522566ff7c38f8a988bbf7679364
... okay, this is like the 5th error related to something with this
and file paths. Need to write some validation logic.
Change-Id: I4314818aa1bc25b8cf7bd3593850d3836ccb867c
Git only allows binary names prefixed with `git-credential-` if the
path to the helper is not absolute.
Why? Who knows.
Change-Id: I216b2a621f62a73f05e21def7ec8016b29ede892
Currently this functionality is provided by a shell script stored in
/etc/secrets (which has the password value hardcoded).
This needs to happen in a separate commit from the one that changes
the pipeline to avoid breaking it (it needs to be deployed first).
Change-Id: I680754c828ccefbacfcf0d5c813a4bc19493ba4c
We already checked this in, but this commit adds the configuration for
making use of it.
There are two copies of besadii's JSON configuration with different
permissions.
Note that the buildkite-graphql-token path needs to be updated in
static-pipeline.yml, but this needs to happen in a separate commit
after deploy because the pipeline will break otherwise.
Change-Id: I6fab4bf1a2e679df7cf76521e2b53bd9dadbac62
... this option really is a pitfall! The list of programs is now the
same as in the upstream module, plus curl and jq.
Change-Id: I29edae4b2400a2724f62df9efa1dc184a8b0af5f
The DynamicUser + Group configuration does not work as planned, thus
the systemd LoadCredentials feature is used instead which makes the
file (which itself is only readable by root) available in a
memory-backed location only readable by the service.
The secret is only available to `ExecStart` commands, so units using
this feature can not be used with pre/post units and the like if those
commands need secrets.
To accommodate this, the merge of configuration files has been moved
into the service launch script, which is now the ExecStart= process.
For details take a look at https://www.freedesktop.org/software/systemd/man/systemd.exec.html#LoadCredential=ID:PATH
Change-Id: I693fe5677cc0d63c7aa485c2c7472457c5262166
It turns out the lib.mkAfter call doesn't behave as expected -
only *some* of the packages that are defaulted end up in the $PATH.
I suspect this is actually something else, e.g. these packages are
always added for some reason or another, and the option is completely
overridden every time.
Change-Id: I854c7198520d82b00e6338ed0fe653836226dc6d
Turns out that the type of this option is not concatenative and it
replaces the packages needed to run Buildkite if set.
Change-Id: I9f52572bc165bccdd8c6518cfdf7b8967f7a50d0
The irccat module uses DynamicUser, so to grant permission to it a new
group has been added for irccat.
I have some vague memory of DynamicUser + Group not behaving as one
would expect, but we'll see what happens.
Change-Id: Iab9f6a3f1a53c4133b635458ce173250cc9a3fac
This step would get inserted at the wrong point in the build pipeline
otherwise, causing a dependency cycle and causing the pipeline to fail.
Change-Id: I534568eec77f74ae6c47276820f8a9e99493a3ea
This simplifies the fallback logic used in case of Nix evaluation
failure and makes it so that the evaluation step itself is the one
that is marked as failed in Buildkite.
This is possible because the pipeline upload command will insert new
steps at the point where it runs in the pipeline, and not later.
Change-Id: I870534c004ebc457a1602623c4e5f9c0c68e28fc
Adds a systemd EnvironmentFile secret that contains the Gerrit
username & password for gerrit-queue.
Change-Id: I25acf87764c26774045138402b8a417b6813ee8f
This is not yet including the secret configuration for gerrit-queue,
and just expects the secret (gerrit username & password) to be
available in /etc/secrets.
Change-Id: Ia465ef7f3f521c70d606d7fdeba9aa83c7e1b98b
This is required for a simplification of the build pipeline (following
CL) and needs to be in a separate commit as it can not be done
atomically (merging the other commit to deploy it would immediately
break pipelines otherwise).
Change-Id: I5d8ec8f3238f79b5518d799486bf98d1d9516c43
Sets up the key set and adds an initial secret (besadii config with
tokens) to be deployed to whitby.
Change-Id: Ic07fd5e66b9e7a533013e04c35e052c2aa11f77d
Gerrit wraps RFC5322 emails in another layer of quotes when passing
them as flags, and this needs to be unquoted.
Otherwise hook invocations fail with cryptic errors.
Change-Id: Ieeb74c662873d99a4154f8cbc92da77b039cb88e
Ensure that besadii sees $0 as the correct command name, since that is
the sole mechanism by which its functionality is switched around.
There was a lingering commit that introduced this bug and hadn't been
deployed in a couple of days. Maybe time to tighten deploy cycles soon
...
Change-Id: Ie4284c0f6e5e06d71a71a3702ec7e092260e0ce5
Extracts author information from the flags passed by Gerrit and moves
them along to Buildkite. This should display the owners of builds
correctly in the UI, rather than marking everything as coming from me.
Change-Id: If9efe5553a13f0dbdb8bf3936c1d341ae5922318
This makes it possible to use besadii for any TVL-ish setup using
Gerrit and Buildkite, with the same hook functionality as for TVL.
Change-Id: I1144b68d7ec01c4c8e34f7bee4da590f2ff8c53c
Adds configuration keys and rudimentary validation for all other
besadii settings that are currently hardcoded.
This adds the config options:
* repository: Name of the repository in Gerrit.
* branch: Name of the HEAD branch in the repository.
* gerritUrl: Base URL of the Gerrit instance
* gerritUser: Username of the Gerrit user
* gerritPassword: Password of the Gerrit user
* buildkiteOrg: Name of the Buildkite organisation
* buildkiteProject: Name of the pipeline inside the Buildkite
organisation
* buildkiteToken: Auth token for Buildkite access
All of these configuration options are required.
Change-Id: Ie6b109de9cd8484a3773c6351d7fd140f39a49ed
On whitby, the besadii config will live in
/etc/secrets/besadii.json. This CL updates the call sites to pass this
config path to besadii so that it can load Sourcegraph configuration.
Change-Id: Ia139b9fa3b827e7a5f2386214390acc6fe19a75a
Initial step towards moving besadii away from hardcoded values and
onto config files. This is required because I want to reuse besadii
outside of the TVL context.
Change-Id: Id4fa7a49c5d4f876a02b202f04a421ab5ba0dcc4
Change the Nixery configuration to use the plain nixpkgs package path
instead of the depot path. AFAIK, nobody uses this to fetches depot
packages at the moment - but plenty of people fetch non-depot
packages.
This means that Nixery is cache-busted less often (previously on every
commit => every deploy).
We'll figure out another way to have a depot Nixery later.
Change-Id: Iba632333346181c3d2ce992fbab396ed0d9f86aa
Removes besadii support for the previously used 'ref-updated' hook and
instead introduces support for the 'change-merged' and
'patchset-created' hooks.
These hooks more accurately capture the semantics of when besadii
should trigger CI builds and using them will avoid problems such as
skipping 'canon' builds if chains of CLs are submitted together.
Change-Id: Ib90356c069780bf0c0250e56b927e46a5b31ce7f
Instead of manually tracking the build status through Buildkite
metadata, use the Buildkite GraphQL API in the `🦆` build
step (i.e. the one that determines the status of the entire pipeline
to be reported back to Gerrit) to fetch the number of failed jobs.
This way we have less manual state accounting in the pipeline.
The downside is that the GraphQL query embedded here is a little hard
to read.
Notes:
* This needs an access token for Buildkite. We already have one for
besadii which is also run by the agents, so I've given it GraphQL
permissions and reused it.
* I almost introduced a very rare bug here: My initial intuition was
to simply `exit $FAILED_JOBS` - in the extremely rare case where
`$FAILED_JOBS % 256 = 0` this would mean we would ... fail to fail
the build :)
Change-Id: I61976b11b591d722494d3010a362b544efe2cb25
We are changing the Gerrit hooks which invoke besadii, but this
structure will be used for both kinds.
Change-Id: Idb1cb0c640d2c42db8e7af39f3ab372a97bfef91
This is causing failures when trying to update Sourcegraph at least,
for good measure I've trimmed both.
Change-Id: I40266ee83b4e266ffe50f16bb365eb2e51952513
This function is also generally useful for readTree consumers that
have the concept of subtargets.
Change-Id: Ic7fc03380dec6953fb288763a28e50ab3624d233
Since GCP nuked us, the backups are now moving to GleSYS'
S3-compatible object storage.
This refactors the restic module to support S3-compatible storage
instead of GCP, and switches to the appropriate new secret paths.
The secrets were placed on whitby manually and I verified that the
backups work.
This fixes b/157
Change-Id: I6a9d2b0581967605ce736605a3befb44cdeae7e1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3883
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
It seems that shell variables don't work as expected inside the
Buildkite pipeline, so usage of variables has been removed.
We also don't echo the revision anymore because of that, but it does
still appear in the log of `git push`.
Change-Id: I124e3b09af896da898f2a78715ed371651a1c5f8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3780
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This makes the revision number available much earlier (before the rest
of the pipeline runs, while Nix eval is happening) which should only
be a few seconds after a commit to canon.
It is also more readable in this shape.
Change-Id: Iccbb17dfef6afe68f54fda41e8d10c4dc52b08c2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3775
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This automatically pushes a new ref at refs/r/$revision to Gerrit
whenever a CI run completes on canon.
Revision numbers can be fetched from Gerrit with this command:
git fetch gerrit "refs/r/*:refs/r/*"
Note that this build step requires credentials to be provisioned on
the CI runner machine.
Change-Id: I37bb14346832f891240aa47bb55affaace3d5f21
The previous hash had a weird salt length and a trailing newline.
This fixes it.
Change-Id: I1f03238181d0caad38e1f1dbc477356bc20fc32d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3689
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
The setup is explained in the comment, but TL;DR: Use the derivation
hash of static files to create permanent URLs.
Relates to b/151.
Change-Id: Ib1ca3a1a00c90a47f4bf39c29a8b4bbf5b215e7d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3664
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This hostname can be used for hosting static assets with aggressive
caching for everything, or potentially CDNing stuff if we ever have
large things here.
Change-Id: I10afdad5eb08125d8d09108e9e099f5573362fe5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3663
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
As cschilling explained on cl/3563, there isn't actually anything in
this state that we *need* to persist. We're still keeping it in a
persistent directory on disk as this serves as an optimisation after
restarts of josh.
Change-Id: Ia88886792a5acac34508b5b8a669bd519ca033de
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3631
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This lets each service declare their backup paths together with the
configuration for the service, which is a lot more sensible than what
we had before.
Fixes b/147
Change-Id: If76fe62639f4cc0e6fbb63a2959d584479d8f0fb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3583
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
I can never remember which is which.
Change-Id: I69b8235862b8c5b49030a74bfca25aaa113273b7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3582
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This makes it easier to click through to a build from Gerrit after
submitting a CL.
Change-Id: Ic5c6eeb81c87bc4ea23c5c5ca25704434b081fd0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3572
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Currently besadii only posts comments when builds succeed, but it
might be very useful to also have a link to a build when the build is
started.
This just shuffles code around. The only functional change is that the
`labels` field in the review input is marked as `omitempty`, as this
will not be needed when posting the build start comment.
Change-Id: Id4a43fad8817c9a15da02f01ab2b781d48b46978
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3571
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Relates to b/147.
First step towards giving depot modules the ability to declare their
own backup directories by moving all restic configuration into a new
module and adding a NixOS option for inclusion/exclusion paths for
backups.
This still keeps all backup paths within the whitby config.
Change-Id: Ia96833668f1a3d02da892261153d8b02156b8ac0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3565
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Previously we served the dumb git HTTP protocol from code.tvl.fyi via
cgit. This CL disables this feature and instead runs josh in the same
location (by redirecting appropriately), but while also enabling
partial cloning of all subtrees of the depot.
For example, after this CL the following would result in an
independent clone of //nix/readTree:
git clone https://code.tvl.fyi/depot.git:/nix/readTree.git
Note that there are no josh workspaces configured at all for now,
these references are only for static depot subpaths.
Please refer to the documentation for josh for more information on
available kinds of josh filters.
Josh state is kept in a systemd state directory in /var/lib/josh and
backed up to Restic. Backing this up is necessary, as josh uses
stateful information to do things like tracking merges and rewriting
history per subtree appropriately to avoid cloned repositories ending
up in peculiar states.
Change-Id: I156f0298c2aa42e3bdbf5a0e86109070d640c56e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3563
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This one seems a little more involved:
https://docs.sourcegraph.com/admin/migration/3_31
I believe we skip that corruption issue in the previous CL though, by
simply never deploying a version with that weird broken image.
See b/144
Change-Id: I3bbf1b719d00905e08a92011ace5485467f504ef
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3525
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
We changed away from the default sourcegraph one because it didn't
support Nix, but it seems that there's been a change in the
interaction protocol.
Change-Id: I3a2691df6a87672cf83b819143f25d93d9cd6d13
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3531
Tested-by: BuildkiteCI
Reviewed-by: eta <tvl@eta.st>
Reviewed-by: sterni <sternenseemann@systemli.org>
Add the beginnings of an auto-deploy script for whitby, intended to
be (eventually) suitable for running automatically in a systemd timer.
The current iteration of the script doesn't actually do any deploying,
but instead takes as an argument a revision, creates a new git worktree
in /tmp with that revision checked out, runs a nix-diff of whitby's
system derivation in the running system and at that closure, puts an
html-rendered version of that diff in the public directory used by
deploy.tvl.fyi, and finally sends a message to IRC via irccat with a
link to that HTML page.
Refs: b/110
Change-Id: Id40525567f8845590c909568befd8d00c07a481c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3145
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: kn <klemens@posteo.de>
Add a new domain and nginx virtual host at deploys.tvl.fyi, serving out
of a static directory on whitby which is created by systemd-tmpfiles.
This will be used to serve diffs rendered by nix-diff for
pending deploys for whitby
Since this contains stateful data, it is added to the restic backups
on whitby.
Refs: b/110
Change-Id: I5869d40800bbf5fb8fb39878a857f66ff5787830
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3144
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
We changed the configured pipeline in Buildkite to upload
`static-pipeline.yaml` instead of containing the steps of that
pipeline itself.
This makes it easier to test changes to builds and such, but adds
another build step with scheduling overhead etc.
However - we can work around this by killing one of the existing build
steps. There's no reason the failure status zeroing (required for
status reporting) shouldn't be part of the pipeline setup, so I've
moved it there instead and nuked that step.
This should mean that the pipeline is configurable from within the
repo, but without slowing anything down.
Change-Id: I206ecc02647de42a461e33c02879ab84daf5ed2b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3461
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Skip build steps if they have already been built, reducing pipelines
to the things that actually changed between builds. On canon all
targets are always built (we require this for anchoring).
Note that this is not perfect, garbage collection and competing
pipelines may affect each other.
Also note that we have some impure targets that change on every
commit.
Change-Id: Ic6bae3b6c8e1e7fd2116ec252f5089f471854ab6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3427
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
We currently evaluate every target twice -- once when the depot pipeline
is built and once when actually running the build step in question. Nix
evaluation is quite slow especially given heavy use of import from
derivation in depot, so avoiding the second evaluation is desireable.
Evaluating a derivation yields a `drv` file in the nix store which can
be passed to `nix-store --realise` in order to build it eliminating the
need to wait for evaluation. We can obtain the path to the `drv` file
while building the pipeline via `target.drvPath` and remember it for the
build later.
However we need to work around a flaw (or oversight) in Nix's dependency
tracking via string context: This is based on derivations, not output
path (because this is what evaluation deals with, likely). This is no
problem per se, but an issue is that Nix can't express a dependency on
a `drv` file without any of its output paths. This means for us that we
either have to build all output paths at evaluation time (which we don't
want, obviously) or to deal with the fact that the `drv` file we need
may be garbage collected at any moment after discarding the string
context -- then nix is unable to track the reference from the pipeline
to the `drv` file in the store.
So to prevent a race condition between the pipeline and the garbage
collector we fall back to the normal nix-build invocation as we did
before.
Change-Id: I9ef8bd233085dc6e30eba54f403ea03ac2d35748
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3426
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This is because I'm bored of CAS gradually consuming all the RAM on Whitby.
Change-Id: Idcc14c19d99a6d3553739c5765be3faf2bdf9d84
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3233
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <mail@tazj.in>
This is a bit of an under-documented feature, but if the "tag" field for
a gerrit review starts with the string
"autogenerated:<something>~<something-else>", only the last comment per
instance of <something> will be shown by default on the CL page (with
the rest viewable by toggling the "Show all entries" switch). The idea
behind the "<something-else>" tag is to be used for the "type" of
comment within a particular system - gerrit's documentation gives the
example of one tag for "the build is running" and another for "the build
has finished, here's the result".
Change-Id: I9199a6ed97beca1b3a51ec5d6230c6c8358ba2b3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3374
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
The dropping of `www.` is intentional, that was unused.
Change-Id: I300f82bb6e5626e2658be8fc5b5e3cf872ab7099
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3384
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Adds a new module for the nixery.dev domain and serves it from whitby.
Note that the DNS records do *not* point to whitby yet, so deploying
this will lead to a failed TLS provisioning unit - but this is
intentional.
Change-Id: I911f67a0aa24f8df3cb52d2cfc49a8b6132cf718
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3383
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
We'll need to do a DNS switchover, likely with a short amount of
downtime due to TLS provisioning.
It would be possible to avoid this by provisioning a cert manually
pre-hoc through the DNS challenge and then configuring whitby to use
that, however I simply don't have time for that right now and the
Google Cloud Project for Nixery is going away in O(days) for $reasons.
Change-Id: I88dface5aaacec5acfa525ae117462f8ad296d92
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3382
Tested-by: BuildkiteCI
Reviewed-by: kn <klemens@posteo.de>
This is required when people change their email addresses (e.g.
cl/3349) as nothing in Gerrit will update that information from the
OAuth provider.
Change-Id: I1eafdf22efd37898dcd0d06bb9a5d1471ffb5e31
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3356
Tested-by: BuildkiteCI
Reviewed-by: eta <eta@theta.eu.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: lukegb <lukegb@tvl.fyi>
I got a new domain, etc.
Change-Id: Ic8ffc01f4e5e89dc2458d80a9c38757438cfa764
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3349
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This record is intended to serve Nixery.
Change-Id: I575dedac18c98f9f4bd5e459babe79e850361651
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3343
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This sets up a very simple Nixery instance with some things lacking:
* no support for garbage-collecting image fragments (yet)
* no popularity setup
The plan is to use this to get the ball rolling on a separate
domain (e.g. images.tvl.fyi), iron things out and then look into
flipping over nixery.dev
Change-Id: Ic594809f9d487fec7a0f632d608752a3f9c61315
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3280
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: sterni <sternenseemann@systemli.org>
Break out the configuration for the prometheus fail2ban exporter, which
is a simple python script that exports stats from fail2ban as a
prometheus-scrapable textfile, from Mugwump into a reusable nixos module
in //ops/nixos/modules.
Change-Id: I5451c9c5de6c7bc4431150ae596a9c758bf1b693
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3136
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This fix is essentially the same as the one in cl/1263.
Change-Id: I27be280a610914fcfbb6d7fee7aebaa56b993812
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3158
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
* users/grfn/system/home/yeren: remove obsolete awscli2 overrides
* ops: make new isSystemUser || isNormalUser assertion happy
* users/grfn/system/system/mugwump: make buildkite agents system users
* users/tazjin/nixos/camden: set isSystemUser = true for git
* users/tazjin/emacs: Remove missing & broken packages
* third_party/openldap: remove, as the argon2 module is now enabled upstream
* third_party/gerrit_plugins: Pinned new unstable hashes
* third_party/nix, third_party/grpc: Disabled CI as these are broken
* third_party/overlays/emacs: Bumped version to stay in sync with channel
* third_party/buzz: Update LIBCLANG_PATH to reference libclang.lib,
since libclang's default output no longer contains libclang.so
* users/grfn/system/home: Install julia-stable instead of julia (which
aliases to julia-lts), as the latter depends on an insecure version of
libgit
Change-Id: Iff33b0ecb0ef07a82d1de35e23c40d2f4bf0f8ed
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3001
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Until we have declarative ZNC config (which requires a solution for
secrets handling in it), make sure we back this up as well.
Change-Id: Idb186327da171eb6d3dbbd83801639f1f9321a40
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3159
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Use the new module settings which apply configuration in cn=config
instead of slapd.conf.
The module performed this update via lib.mkChangedModuleOption, I've
applied the transformations contained therein manually. Note that some
of the settings were already in place, which means that the `suffix`
and `database` options seemingly disappear into the void.
Fixes b/105.
Change-Id: I8a968c1eb8cb7827618cb732cdb46006a5d011f9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3157
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This changes the evaluation order for the `depot` argument and ensures
it is partially evaluated before the module system starts resolving
imports.
This way we can import modules from `depot.path` without `depot`
having to come from readTree.
Fixes b/129.
Change-Id: Icf4dd2be15011055dac8b27e991a4ff6a12bf827
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3156
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
This time using `tools.hash-password` because login did not work with the
initially created hash.
Change-Id: I1eb62a496d2d8497d27573af47bf8bf70dac9bbb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3153
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This will be used to serve (nix-) diffs for pending deploys of whitby
Change-Id: Ia864993b1fcb3b7ce5fcc21f32a27528a4c31f08
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3149
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
irccat is passing the realname option as the ident of the user, which
doesn't match what is in ZNC.
It hasn't seen any upstream commits in a long time, so I'm just
leaving this as is and fixing it locally in our config.
Change-Id: I3bf865f37b8df9c1cd891a94245ca3fad376bbe1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3150
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
I like running fail2ban on any machine that has stuff like ssh
world-open, to limit the potential for password brute-force attacks etc.
Change-Id: I0c60811ae5a2fddb44f04679fb455e646b8e39c5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3138
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This doesn't replace all of them in the repo, but at least the ones
that are relevant to our move.
Change-Id: I842e7594b4c16af30d880272417874f6b29afd22
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3134
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: grfn <grfn@gws.fyi>
This configures owothia to use her new bouncer to HackInt.
Change-Id: I80eb8191c2b0f2a6f8a31d19b60250ade27c1913
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3129
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Points clbot at the new local ZNC instead. This will make it part of
the things happening through the `tvlbot` account.
Relates to b/101
Change-Id: I1c15ffa5720d3af34475c15bee3fdaa537ac659b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3127
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
This adds a shadowsocks service, running on port 8443, tcp and udp.
The password is read from /etc/secrets/shadowsocks-secret.sec, and needs
to be populated externally.
Change-Id: I6797150db108ba14459502dee43d8e4ed6cfa910
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3125
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
The following commit itends to bind on port 8443 on all interfaces,
so let's move this to something else.
Change-Id: Ibb94a0f4e6892b6e543b542b89bcdaaefb617f23
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3126
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Bouncer to be used for TVL's IRC bots, see b/101
Change-Id: Ic9f71ecd94365d3baa31e0552b1ce16362f94557
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3124
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Sourcegraph logs warnings about this on startup otherwise. Unclear
to what degree it really affects operation though.
Change-Id: I6ee7c5358631aafd9a7f8155150361bf7499314d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/3098
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
step up in the pipeline
