Instead of the two different representations (which we don't really
use much), use a `Box<str>` (which potentially shaves another 8 bytes
off `Value`).
NixString values themselves are immutable anyways (which was a
guarantee we already had with `SmolStr`), so this doesn't change
anything else.
Change-Id: I1d8454c056c21ecb0aebc473cfb3ae06cd70dbb6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8151
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
The size of a `Vector<Value>` is 64 *bytes*, which is quite large, and
it bloated the entire Value type to this size.
This change adds an indirection for the inner vector through Rc.
Initially I tried to use a Box, but this breaks pointer equality
guarantees for the Vector when it is small enough to be inlined.
This reduces the size of Value from 64 to 32 bytes.
Change-Id: Ic3211e861b1966c78b2c3d536ba291fea92647fd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8150
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Warning: This is probably the biggest refactor in tvix-eval history,
so far.
This replaces all instances of trampolines and recursion during
evaluation of the VM loop with generators. A generator is an
asynchronous function that can be suspended to yield a message (in our
case, vm::generators::GeneratorRequest) and receive a
response (vm::generators::GeneratorResponsee).
The `genawaiter` crate provides an interpreter for generators that can
drive their execution and lets us move control flow between the VM and
suspended generators.
To do this, massive changes have occured basically everywhere in the
code. On a high-level:
1. The VM is now organised around a frame stack. A frame is either a
call frame (execution of Tvix bytecode) or a generator frame (a
running or suspended generator).
The VM has an outer loop that pops a frame off the frame stack, and
then enters an inner loop either driving the execution of the
bytecode or the execution of a generator.
Both types of frames have several branches that can result in the
frame re-enqueuing itself, and enqueuing some other work (in the
form of a different frame) on top of itself. The VM will eventually
resume the frame when everything "above" it has been suspended.
In this way, the VM's new frame stack takes over much of the work
that was previously achieved by recursion.
2. All methods previously taking a VM have been refactored into async
functions that instead emit/receive generator messages for
communication with the VM.
Notably, this includes *all* builtins.
This has had some other effects:
- Some test have been removed or commented out, either because they
tested code that was mostly already dead (nix_eq) or because they
now require generator scaffolding which we do not have in place for
tests (yet).
- Because generator functions are technically async (though no async
IO is involved), we lose the ability to use much of the Rust
standard library e.g. in builtins. This has led to many algorithms
being unrolled into iterative versions instead of iterator
combinations, and things like sorting had to be implemented from scratch.
- Many call sites that previously saw a `Result<..., ErrorKind>`
bubble up now only see the result value, as the error handling is
encapsulated within the generator loop.
This reduces number of places inside of builtin implementations
where error context can be attached to calls that can fail.
Currently what we gain in this tradeoff is significantly more
detailed span information (which we still need to bubble up, this
commit does not change the error display).
We'll need to do some analysis later of how useful the errors turn
out to be and potentially introduce some methods for attaching
context to a generator frame again.
This change is very difficult to do in stages, as it is very much an
"all or nothing" change that affects huge parts of the codebase. I've
tried to isolate changes that can be isolated into the parent CLs of
this one, but this change is still quite difficult to wrap one's mind
and I'm available to discuss it and explain things to any reviewer.
Fixes: b/238, b/237, b/251 and potentially others.
Change-Id: I39244163ff5bbecd169fe7b274df19262b515699
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8104
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
Adds a `Value::neo_nix_eq` method (the `neo_` prefix will be dropped
when we flip over to the generator implementation of the VM) which
implements Nix equality semantics using async, generator-based
comparisons.
Instead of tracking the "kind" of equality that is being compared (see
the pointer-equality doc) through a pair of booleans, I've introduced
an enum that explicitly lists the possible comparisons.
Change-Id: I3354cc1470eeccb3000a5ae24f2418db1a7a2edc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8241
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
These functions will be used by the changes in the VM to observe the
runtime execution of generator frames, and provide a more linear view
of the execution of the Tvix VM.
Change-Id: I10b1b1933dedc065e7c61d5d6062f0aaeee0097e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8240
Tested-by: BuildkiteCI
Reviewed-by: Adam Joseph <adam@westernsemico.com>
In order to implement an asynchronous builtins.sort (required for
moving builtins to generators), we need an `async` sorting algorithm
as our comparators involve invoking a Nix function.
This commit implements a fairly simple, optimised bubble sort as the
sorting algorithm used in our `async fn sort_by`.
There don't seem to be any crates providing async versions of things
like this, and they might actually be pretty hard to implement
generically due to some constraints about how `async` works.
Note that this algorithm is less efficient than the hybrid
"timsort/mergesort/insert sort" used in the Rust standard library. I
tried to write a merge sort implementation, but ran into isuses with
the sort becoming unstable because our comparators can not yield
equality. This is the simplest implementation which I know to be
correct.
Note that as of this commit this is *not* covered by the Tvix test
suite, but it will be as soon as the rest of the generator code lands.
Change-Id: Ia9a604f7dd941d6acc9212c902e0e637ed75bebc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8239
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Tested-by: BuildkiteCI
All code initially using this has been replaced by the simpler and more
performant implementation with StreamCDC and read_all_and_chunk.
Change-Id: I08889e9a6984de91c5debcf2b612cb68ae5072d1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8265
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This was the last piece of code using BlobWriter.
We can also use `read_all_and_chunk`, it's just requires a bit more
plumbing:
- The data coming from the client (stream) needs to be mapped (we
extract the .data field).
- The stream needs to be turned into an (async) reader
- The reader needs to be made sync, and that code using the sync reader
needs to be in a `task::spawn_blocking`.
Change-Id: I4e374e1a9f47d5a0933f59a8f5c121185a5f3e95
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8260
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This moves the logic from src/import.rs that
- reads over the contents of a file
- chunks them up and uploads individual chunks
- keeps track of the uploaded chunks in a BlobMeta structure
- returns the hash of the blob and the BlobMeta structure
… into a generic read_all_and_chunk function in
src/chunkservice/util.rs.
It will work on anything implementing io::Read, not just files, which
will help us in a bit.
Change-Id: I53bf628114b73ee2e515bdae29974571ea2b6f6f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8259
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Make use of the helper function here as well.
Change-Id: Ia0afd84eb3903bb897ee6aee884dc291f3e4371c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8258
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
When building tvix-store without default features, this variable doesn't
need to be mutable. Silence the warning.
Change-Id: Iec61be0064c0cef276a29ef22e5c4af3b052efe8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8267
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We currently send two warnings in case of detecting dead code - W008
inside compile_dead_code, and a more detailed warning in all places that
invoke compile_dead_code:
```
warning[W007]: useless operation on boolean: this expression is always false
--> /nix/store/qz3gjn95gazab4fkb7s8lm6hz17rdzzy-414z9nnj1wy66ymq6vgb693x9xjz6hf2-nixpkgs-src/pkgs/top-level/perl-packages.nix:12079:15
|
12079 | doCheck = false && !stdenv.isDarwin;
| ^^^^^^^^^^^^^^^^^^^^^^^^^
warning[W008]: this code will never be executed
--> /nix/store/qz3gjn95gazab4fkb7s8lm6hz17rdzzy-414z9nnj1wy66ymq6vgb693x9xjz6hf2-nixpkgs-src/pkgs/top-level/perl-packages.nix:12079:24
|
12079 | doCheck = false && !stdenv.isDarwin;
| ^^^^^^^^^^^^^^^^
```
The place invoking `compile_dead_code` has more context to why the code
is unused, so it's error message is much more useful.
Stop emitting the less informative warning inside compile_dead_code
(W008), and update the comment that we expect the caller to emit a
warning.
I kept W008 itself still around, in case we end up having places this
will get used again.
Change-Id: I2c5d84fc0cb4035872cd4b71cc3e9e34e120eb37
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8024
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This removes the use of Box::new, switching fastcdc to version 3.0.2
with https://github.com/nlfiedler/fastcdc-rs/issues/25 fixed.
Change-Id: I64f388b9e0a7f358e25a8bb7ca0e4df1d3bb01c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8249
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
We're using this in a bunch of places. Let's move it into a helper
function.
Change-Id: I118fba35f6d343704520ba37280e4ca52a61da44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8251
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This is useful not only in blobwriter contexts.
Change-Id: I4c584b5264ff7b4bb3b1a9671affc39e18bf4ccf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8245
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This already is a &CS, so we don't need to clone().
Change-Id: I5397a5948ae7fe4781f18df760a79047f83dca01
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8243
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Look at the data that's written to us, and upload all chunks but the
rest in parallel, using rayon. This required moving `upload_chunk`
outside the struct, and accepting a ChunkService to use for upload
(which it was previously getting from `self.chunk_service`).
This doesn't speed up things too much for now, because things are still
mostly linear.
Change-Id: Id785b5705c3392214d2da1a5b6a182bcf5048c8d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8195
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
The Directory service does already reject inserting invalid (wrongly
sorted) Directory messages, but our test case didn't provoke it.
Change-Id: I228e201925e8999186659a2d8da0118db184d9ab
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8167
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This exposes the previous default behavior at the `tvix-store daemon`
subcommand.
It also adds a `tvix-store import` command, which will ingest a given
path into the store.
Change-Id: Ide14f1d409b9364e7f98090690c744326486e470
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8166
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This provides a service using /dev/shm, that's deleted once the
reference is dropped.
Refactor all tests to use these, which allows getting rid of most
TempDir usage in the tests.
The only place where we still use TempDir is in the importer tests,
which work on a filesystem path.
Change-Id: I08a950aa774bf9b46d9f5c92edf5efba36053242
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8193
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
While we don't want to keep all of the data in memory, we want to
feed a reasonably-enough buffer to the chunking function, to prevent
unnecessarily trying to chunk over and over again.
Change-Id: I5bbe2d55e8c1c63f8f7ce343889d374b528b559e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8160
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This imports the contents at a given Path into the tvix store.
It doesn't register the contents at a Path in the store itself, that's up
to the PathInfoService.
Change-Id: I2c493532d65b90f199ddb7dfc90249f5c2957dee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8159
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This also uploaded HELLOWORLD_BLOB_CONTENTS before, but it's not
referred from anywhere in the fixture.
Change-Id: I823133afe0f08d18a59e2ac4e4d4bb7d34ce8a2b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8158
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This allows hiding to tests what exact implementation we're using, when
testing things that do something with a store, but don't care what's
used for underlying storage.
Change-Id: I7cdf60fd73c25d5050159cb31ec177db2bc2a7f1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8155
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This will moves the chunking-as-we-receive logic that so far only lived
in grpc_blobservice_wrapper.rs into a generic BlobWriter.
Change-Id: Ief7d1bda3c6280129f7139de3f6c4174be2ca6ea
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8154
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Use the FastCDC::cut function to ask fastcd for cutting points as we
receive the data. Make sure to keep the last chunk in the temporary
buffer, as we might not actually cut at the end.
Also, use rayon to calculate the blake3 hash if the input data is
> 128KiB.
Change-Id: I6195f3b74eac5516965cb12d8d026aa720c8b891
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8135
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This switches away from the less canonical "ronomon" version to the
implementation as described in the
[paper](https://ieeexplore.ieee.org/document/9055082) by Wen Xia, et
al., in 2020.
That version uses 64-bit hash values and tends to be faster than both
the ronomon and v2016 versions, and produces the same chunking as the
2016 version.
As per https://docs.rs/fastcdc/latest/fastcdc/#implementations-1, it's
the recommended choice.
The crate also gained support for streaming version of chunkers:
https://docs.rs/fastcdc/latest/fastcdc/#large-data, which might be
useful.
Change-Id: Ieabec3da54eb2b73c045cb54e51f7a216f63641e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8134
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
These were implementing against the (more complicated) gRPC interface,
for which we now have a wrapper.
Change-Id: I0a8284493718ab99618a1d21a76df4d173edb899
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8100
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This swaps out the implementation used in the main entrypoint.
We now use the non-gRPC aware Sled*Service, and wrap it with
GRPC*ServiceWrapper to spin up the gRPC server.
Change-Id: I5a1236c0612eee85e49891062040127c8bd95058
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8106
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This exposes a proto::pathinfo_service_server::PathInfoService for a
directoryservice::PathInfoService and a way to calculate NARs.
Change-Id: I30cd058562f83d063c78b84976ec97190de49400
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8097
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This adds a PathInfoService trait, and an implementation for it using
sled, and one using a HashMap.
Change-Id: I85fe4c9b6105808d7b0c095441326424ffc2d2bb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8099
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This adds a NARCalculationService trait, which will take a root node,
and provide a proto::CalculateNarResponse in return.
It also adds a NonCachingNARCalculationService implementation, that will
simply always render the NAR in memory to calculate the size and sha256,
without any caching.
Change-Id: Id1ffb18559212fa6001f70f2634bbc3dfd0aa343
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8096
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Make sure the blob size in the current proto node matches what we get
back from the blob backend.
Change-Id: I939fa18f37c7bc86ada8a495c7be622e69ec47f8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8129
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
It's much easier to just unwrap the TempDir::new() result.
Change-Id: I7b05bc18f3146401e30e1cc2bb412503c5171a66
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8128
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This moves the logic rendering NARs to a struct using the
previously introduced, more granular BlobService, ChunkService and
DirectoryService.
Instead of passing them around to the helper functions, they're kept as
members of a struct.
Remove the async invocations in the nar_renderer tests, there's nothing
async in here.
Change-Id: Ic6d24aaad68a1fda46ce29f2cdb5f7b87f481d5c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8095
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This exposes a proto::directory_service_server::DirectoryService for a
directoryservice::DirectoryService.
Change-Id: I191a6e44e5bce10d904b5f10f0073d6adaf1f572
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8094
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This adds a DirectoryService trait, and an implementation for it using
sled, and one using a HashMap.
Change-Id: Ida61524b2ca949e1b3a78089a5aa7d9f9800c8d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8093
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This takes a BlobService and ChunkService in the constructor, and
provides a [proto::blob_service_server::BlobService] trait for it.
Implementing proto::blob_service_server::BlobService is a lot of surface
to cover, and providing this wrapper will make individual
implementations taking care of how to store chunks or chunking
information much simpler.
Change-Id: Ia7b46484fb3ac9104354d496ff2922dca96ff7b9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8092
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This allows adding more stuff into this namespace, from different files.
Also move tests on proto-related code from src/tests to src/proto/tests.
Change-Id: I49e066fce90efbc18e16d68f94497b32ed5625c0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8091
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
A BlobReader can be used to read a blob, which might consist out of
multiple chunks. Chunks are fetched from a ChunkService.
Change-Id: I1806225b0052adaa4a2320b79b744e554e524ee3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8088
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: tazjin <tazjin@tvl.su>
This module contains the request/response types for generators
requesting actions from the VM.
For most of these, an async helper function is added that will be used
inside of generator functions to make use of these requests/responses
instead of constructing them directly.
Change-Id: I1e085f88adaf784a34867957a0e82532d3a83d7c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8148
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
As applies are thunked, there was no situation where OpCall could be
emitted. In practice, all calls were already tail calls.
Change-Id: Id0d441dcdd86f804d7cddd0cc14f589bbfc75e5b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8147
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This adds a BlobService trait, and an implementation for it using sled,
and one using a HashMap.
Change-Id: Id6bc1b629195d0b26fc503bd7d2dc9e43c41c317
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8087
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This adds the simpler ChunkService trait, and an implementation for it
using sled, and one using a HashMap.
Change-Id: Icb0fdc41b37b44e9e9e4f548d0f4acae1d83b71e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8086
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This came up recently again, it makes sense to document the reasoning
behind the decision.
Change-Id: Ic51d5bc7998c70e8b070b6f42877d8e88613935b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8223
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Because they do not use it, and it can not be passed with the coming
generator refactoring.
Change-Id: I0d96f2357a7ee79cd8a0f401583d4286230d4a6b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8146
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Instead of using a suspended native thunk, calculate and optionally
insert the storeDir builtin when the VM is constructed.
We already have the IO handle available at this point and can just
check whether a storeDir is present, and insert its absolute value as
a builtin.
Change-Id: If966eee6ff26dc888b6e888e7c46170c0c346b05
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8145
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This is a ThunkSet wrapped to be shareable, which will be required
once ThunkSets are embedded in futures.
Change-Id: I5a067b7972ac86e4d354c75ef05c86b2284c1137
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8144
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Again simplifying some code down the line, where bits of code that
construct attribute sets already have the final structure available.
Change-Id: I0bb7a1daa63298122b51be73d35d695a4f73f8b0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8140
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This simplifies some code down the line.
Change-Id: I58dd71e796e11479f44516cf24932f8061843d23
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8139
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Some of these strings are actually just the nix hash representation of
the hash calculated earlier.
There's another one passed around via calculate_drv_replacement_str, but
that's left for a followup.
Change-Id: Id99a2a926a980d679eb49c34ee6a36bf224699b0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8218
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
This provides a way to construct a NixHash struct without parsing
strings.
Change-Id: I947d96e15e51e72d5b02929cda8c5fc31d81253a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8217
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
We ironically didn't add support parsing for the "native" format that
Nix uses under the hood.
This extends the from_str method to peek at the prefix of the string to
determine whether to try decoding as SRI, Nix string, or whether it
should be a bare digest.
Change-Id: I33efd24968b16f86eff18305b4ca8f112c7131d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8216
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This will be used for both Nix hash strings and hash strings without the
algo specified.
Change-Id: Iedfe5494fba5f2be00614ba0fc38bf659eafd447
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8215
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This adds addresses of thunk and closure chunks to the debug output
displayed when dumping bytecode.
This makes it possible to see in the dump which thunks are referenced
by constants in other thunks.
Change-Id: I2c98de5227e7cb415666cd3134c947a56979dc80
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8137
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This CL removes calling into_iter on a reference, as it will
not move out it's content into resulting iterator.
Change-Id: Ifcc10b7cf33b98453570cbcec3eb82ffaba2ffcb
Signed-off-by: Aaqa Ishtyaq <aaqaishtyaq@gmail.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8126
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This CL removes redundant clone from value which is
going to be dropped without further use.
Change-Id: Ibd2a724853c5cfbf8ca40bf0b3adf0fab89b9be5
Signed-off-by: Aaqa Ishtyaq <aaqaishtyaq@gmail.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8125
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Instead of using an explicit closure to clone elements, use .cloned().
Change-Id: I31f0f0bad2b4935e1a8d91fa0d14163c94182e1b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8109
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
The size field already is u32, we don't need to convert here.
Change-Id: Ie29819aa2d1d8022e9bd73fcf05b140e45c967a9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8107
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
We want the address that the Rc is pointing to, not the address of the
Rc.
Change-Id: I8eba21677f242bbe4166c74d4aa4269c316076e3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8045
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This CL address clippy warning which expects to
use `writeln` instead of `write` for strings with
new line.
Change-Id: Ia72a07502c60cfd489ecf1e3833b9d42d44a8b17
Signed-off-by: Aaqa Ishtyaq <aaqaishtyaq@gmail.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8030
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This CL address clippy warning about finding the zero
length of something using `is_empty()` instead of `len() == 0`.
Change-Id: I2b36c7c7b65b733609fc0dcd33be06f9d772bc9b
Signed-off-by: Aaqa Ishtyaq <aaqaishtyaq@gmail.com>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8029
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This branch was missing, and an assumption elsewhere just executed the
returned (broken) bytecode.
This fixes b/253.
Change-Id: I015023ba921bc08ea03882167f1f560feca25e50
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8090
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: tazjin <tazjin@tvl.su>
These should be inspectable by callers.
Change-Id: Ia9ef871aa63958d06066aaea61b2aecbd217369b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8089
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Nix accepts SRI hashes that are missing their padding characters
in base64, as seen in
7e49471316/pkgs/development/libraries/kerberos/krb5.nix .
It only seems to work in the SRI case, not with `sha256` being set to a
(nopad) base64 string.
Add regression tests for this, and document why we don't want to support
*additional* characters afterwards.
Reported in https://b.tvl.fyi/issues/252
Change-Id: I9ffc2b417501b426ced1894a9cbf95ff5f0e5159
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8037
Reviewed-by: Alyssa Ross <hi@alyssa.is>
Tested-by: BuildkiteCI
Further emphasize Read() can be used to ask for blobs OR chunks, and
that clients usually want to stat and then request (smaller) chunks,
rather than reading whole blobs.
Also clarify that the chunking used to send BlobChunks over has nothing
to do with the chunk sizes communicated in a Stat() request.
Change-Id: Ia615d190aae570611de2655b11342a14d0b75976
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8028
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
