`Evaluation::new_impure()` would require the test to be impure, but
there's nothing in this test specifically requiring us to make use of
impure features.
Change-Id: Idb24981195d1a94f51053ae04403eb5f0e27f3d9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11725
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This uses StdIO, which is only available when the `impure` feature is
enabled.
Change-Id: I039b1f45f6619dd099fa943e58322ff521482dfa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11724
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Gate this behind the nix_tests feature flag (which wasn't applied
consistently).
Also, at least right now all of these use StdIO internally, either by
creating it on their own, or through the `eval_test` helper.
Once we have some proper classification system for tests we can probably
split this up further, but for now only run them if the impure feature
is enabled.
Change-Id: I3236cf09b3391585df99073367c4e4832c5e7898
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11723
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
These VM requests are only emitted by code gated behind the impure feature.
To prevent warning from popping up when building without default
features, allow these to be unused if `impure` is not enabled.
Change-Id: Id871a5215e9a0f09aa78edecdd111369ee7ffe34
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11722
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
These use StdIO, which is only available if the impure feature is
enabled.
Change-Id: I18d8e191a7eba6ba5bd59f43631973eaa796c7bb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11721
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
These are only needed when building with the impure feature enabled.
This removes some warnings when building with --no-default-features.
Change-Id: I3139d9133d4846aeb1b1b5f3830c0d078d047292
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11720
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
If building tvix-build with the tonic-reflection feature, it needs
to import `tvix_castore::proto::FILE_DESCRIPTOR_SET`, which is only
available if tvix-castore is built with the `tonic-reflection` feature.
Change-Id: I355b4c5b4c1333d5cc56335de47ad5d2f1db6337
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11716
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
These tests only interact with the FUSE layer, and
import super::fuse to do its work.
However, this only works if the `fuse` feature is enabled, which we
don't do if we enable the `virtiofs` feature only, causing the tests
to fail:
```
❯ cargo test --no-default-features --features virtiofs
Compiling tvix-castore v0.1.0 (/home/flokli/dev/nixos/code.tvl.fyi-submit2/tvix/castore)
error[E0432]: unresolved import `super::fuse`
--> castore/src/fs/tests.rs:14:13
|
14 | use super::{fuse::FuseDaemon, TvixStoreFs};
| ^^^^ could not find `fuse` in `super`
```
We move src/fs/tests.rs to src/fs/fuse/tests.rs
(and src/fs/fuse.rs to src/fs/fuse/mod.rs) to better structure this,
which will automatically cause both tests and code to only be built if
we have the `fuse` feature enabled.
Change-Id: I8fbbad3e4457e326bdfd171aa5c43d25d3187b5b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11715
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Previously changing any file (including default.nix or README.md) would
cause Nix to compute a different derivation path, resulting in needing
to (very often redundantly) rebuild the crate/package. With this change
you can expect less rebuilds.
Crate2nix currently does its own insufficient src filtering and it does
not expose an API to override the filtering, so instead I created a
function that we can use to override the src to have stricter filtering.
I implemented the filtering for all of the workspace members, if you
want to modify any of them, please read the lib.fileset docs
https://nixos.org/manual/nixpkgs/unstable/#sec-functions-library-fileset
Change-Id: I7ab5a0064a76938d14f7f65801be9f3a5c3bad04
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11714
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
cl/11712 simultaneously introduced this check and made it unnecessary,
since NixString::context should never return `Some` for empty contexts
now.
Change-Id: I41a655ff33910e8326cbb7d7526eb91bd19e9585
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11713
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Both `Some(NixContext::new())` and `None` represent empty contexts,
but the former trips up `NixString::has_context`, and seems likely
to trip up other things.
We could hide the difference in the accessors, but we don't really
*want* the distinction to exist, since heap-allocating a null value
is pretty much always a mistake.
Change-Id: Ie84d26fb0d4b59e68354891ba13bde3bae40ab6e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11712
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
In places where we want to extend context with that from another
NixString, use take_context() to split it off, then call .extend(),
making use of IntoIterator to avoid a bunch of clones.
Change-Id: I2460141a3ed776c64c36132b2203b6a1d710b922
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11705
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: edef <edef@edef.eu>
XmlEmitter gains a NixContext field, and `write_typed_value` extends it
with all context elements present in the passed value.
Once all serialization is done, a into_context() function returns the
collected context, so we can construct a NixString with context.
Tests for this live in tvix-glue, as we use builtins.derivation, which
is not present in the tvix-eval crate.
Fixes b/398.
Change-Id: I85feaaa17b753885f8a017a54e419ec4e602af21
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11704
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Alyssa Ross <hi@alyssa.is>
This is a slightly less annoying version of `join`, which does not
consume self. It's more consistent with HashSet::extend().
Change-Id: Ifd0872da36fe8e7b2aa6948674cb8e4023abe9d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11703
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: edef <edef@edef.eu>
In order to be compatible with the nix XML generator, it’s easier to
generate the XML directly, instead of going through a library which we
have to bend to do what we need.
Removes dependency on `xml-rs`, which came with a full XML parser that
we didn’t use. Only takes a tiny bit of code for the XML escaping,
somewhat simplified.
I add a little escaping value, to make sure we have the same behaviour
as nix proper.
Interestingly enough, we never need to escape XML attribute names,
because the `builtins.toXML` format encodes user-defined values as
attribute keys only. So we only escape attribute values.
Fixes: https://b.tvl.fyi/issues/399
Change-Id: If4d407d324864b3bb9aa3160e2ec6889f7727127
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11697
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Profpatsch <mail@profpatsch.de>
Currently all blobs are uploaded serially when ingesting NARs. If a NAR
contains many, small blobs, ingestion may become slow if there is a lot
of round-trip latency to the blob service.
This makes the NAR ingester use the ConcurrentBlobUploader which allows
for buffering small blobs in memory so they can be uploaded concurrently
to the blob service without blocking further deserialization.
Change-Id: I093a73770232df12d9a11e5d901b99c08505c3cb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11694
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
The archive ingester has a mechanism for concurrently uploading small
blobs to the blob service in order to hide round trip latency with the
blob service when ingesting many small blobs.
Other ingestion sources like NARs also need a similar mechanism, this
extracts the concurrent blob uploading mechanism into its own struct to
make it more reusable.
Change-Id: I05020419ff4b9ad5829fbfb5cd08d36db983b8c0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11693
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Since cl/…, a PathInfoService doesn't need to implement `calculate_nar`
anymore, so most of them don't actually have a handle to a
{Blob,Directory}Service anymore.
This means, we can simplify the construction of them for test cases
a lot.
Change-Id: I100e9e1c9b00a049b4d6136c57aad4cdb04461c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11691
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Have this return the same values as builtins.unsafeGetAttrsPos, rather
than returning a CatchableErrorKind, which crashes the CLI if it bubbles
up.
The environment we're in doesn't allow emitting a warning, as we don't
have `co` in scope, but that's probably OK as a stopgap solution.
Alternative to cl/11665.
Change-Id: I5b2c2530842547c93b6533ed9601ee9b2923b1bf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11685
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This adds rough notes documenting the history of the Nix
daemon protocol, how logging works as well as begins
documenting inputs and outputs for all operations.
Change-Id: Id24a9a658c3e4e7c350ca1e4622f63ed96ccef5a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11594
Reviewed-by: Adam Joseph <adam@westernsemico.com>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Using remove_node messed up the extraction of nodes from the graph. Use
into_nodes_edges() instead, to remove the nodes without cloning.
Change-Id: Id76c7935d082d6f26192cc3cd490483594f1d1e2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11684
Tested-by: BuildkiteCI
Autosubmit: yuka <yuka@yuka.dev>
Reviewed-by: flokli <flokli@flokli.de>
Drop the (unused) feature flags here, and get rid of some crate
dependencies.
Change-Id: Id64852b498725467d56abb12b548301cfba6a760
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11678
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This has already been dropped for tvix-store, drop it here as well.
Change-Id: Ib3aa37bbe9fd4c498b5ba1213f7d922d0c64ffc7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11677
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This gives multi-listener support, as well as listening on named socket
FDs.
Change-Id: I92b441f854e2faf80074463d0ca6bdc23cbd890a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11663
Tested-by: BuildkiteCI
Reviewed-by: yuka <yuka@yuka.dev>
Autosubmit: flokli <flokli@flokli.de>
This aligns the tonic version we use directly in Tvix to the one pulled
in by the OTLP stack.
Change-Id: I658528c8dabb7cd6948f1207ddcdef1984e82037
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11666
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: yuka <yuka@yuka.dev>
Tested-by: BuildkiteCI
Make some space for the rust implementation.
Change-Id: I924dc1657be10abe5a11951c3b9de50bae06db19
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11662
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: yuka <yuka@yuka.dev>
This allows querying two PathInfoService implementations sequentially,
and inserts into the "near" one if it's not there yet.
There is no negative cache, and put / listing is not implemented (for
now).
Change-Id: I24c3d0e0c3c2f0524a6cc7b2f3cbc33eb20cf92b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11636
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We can just use the `BoxStream` directly, or a `once` with the single
`Directory`.
In the recursive case, we also did not properly close the channel after
the first error.
Change-Id: Ifad56d307fc7861107b6d3cffd28d35631d526e6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11635
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Necessary to directly use this in the GRPC DirectoryService wrapper
directly.
Change-Id: Ic6a0038a40dc30071d145af5035345fcd93288ae
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11634
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Use try_stream! rather than stream!, and a bit more map_err and ok_err
to make things a bit more concise. Once we have proper error types here,
and impl Froms, a lot of the error mapping would disappear entirely.
Change-Id: I5240a6b0ff7818b94c151322774242b2c142e33b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11633
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Replace the loop manually driving the iterator with a for … in, and some
of the match with ok_or_else.
Change-Id: I6d7b3ef1bf1c7aa128bd6adef09390b54f79479e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11632
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
… in Cargo.toml.
This gets an imperative `cargo clippy` run to pick up that config,
so `-A clippy::blocks_in_conditions` doesn't need to be explicitly
specified anymore.
Change-Id: I32b6cc50c77c22cba0d816d0db508c2f94b2c383
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11659
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: edef <edef@edef.eu>
Tested-by: BuildkiteCI
Add instrumentation to the get() and put() implementations of all
PathInfoService.
Use the nixbase32 representation of the digest, not the base64 one.
Change-Id: Iea79bbd363bf20f23985e877c6fc1793bbee6a7e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11630
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
We don't produce these erorrs anymore, no need to provide a conversion
to it.
Change-Id: I37933e436ad15c5d90b3ac270c4ef5742980513d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11614
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We don't want to block here, and this also means there's no poisoning to
deal with.
Change-Id: Ic375571970c48beace0005ae2c012135086a4d67
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11613
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This one doesn't require us to deal with poisoning, is upgradeable and
the right thing to use when locking access to data, not IO resources.
Change-Id: I78634953a73404500d28f51f1d93a87e215c8149
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11612
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We don't want to use the std::sync::RwLock here, as it blocks.
This also means we don't need to deal with the error cases anymore.
The list() implementation is updated to use try_stream, which means we
can now avoid collecting everything into a Vec before returning from it.
Change-Id: I9057dcc410dc553e6b1be3f20d5ee830569e8218
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11611
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
nix_oracle is quite misleading, and fooled me into thinking this
validates all .exp files in the repo to match Nix output (which it
doesn't, that's done by verify-lang-tests).
Also, the whole test suite structure thing can use a bit more
explanation.
Change-Id: I2fadcc871843143270ad2ed9ac98de8287280e6f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11609
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Get rid of the RUSTSEC warnings.
Also upgrade tokio to drop the Sized requirement, similar to cl/11608.
Change-Id: Idc6fece23c79eb30fd1dfc5fe64fa2e4c08cd412
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11624
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
This provides an implementation of PathInfoService storing PathInfo in
memory up to a certain capacity, then evicting these that have been used
the least recently.
Change-Id: I9d738687caf4f181a957f72245f26b92832313cd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11622
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
These are not used anymore.
Change-Id: I9c348391c9600e9319f171faf3eda7175ebf7076
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11621
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
These are not used anymore.
Change-Id: I6c16b4d80ddaabcb75fec3ea3e32b923b7719485
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11620
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
This shouldn't be part of the PathInfoService trait.
Pretty much none of the PathInfoServices do implement it, and requiring
them to implement it means they also cannot make use of this calculation
already being done by other PathInfoServices.
Move it out into its own NarCalculationService trait, defined somewhere
at tvix_store::nar, and have everyone who wants to trigger nar
calculation use nar_calculation_service directly, which now is an
additional field in TvixStoreIO for example.
It being moved outside the PathInfoService trait doesn't prohibit
specific implementations to implement it (like the GRPC client for the
`PathInfoService` does.
This is currently wired together in a bit of a hacky fashion - as of
now, everything uses the naive implementation that traverses blob and
directoryservice, rather than composing it properly. I want to leave
that up to a later CL, dealing with other parts of store composition
too.
Change-Id: I18d07ea4301d4a07651b8218bc5fe95e4e307208
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11619
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This does IO, which might take a longer amount of time than what we want
to be blocking the normal executor.
Use spawn_blocking instead. I didn't add it for the constructors, as we
only call these once.
Change-Id: I9a1063099bac9582ca9681043c58c1edc780c5ff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11618
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This does IO, which might take a longer amount of time than what we want
to be blocking the normal executor.
Use spawn_blocking instead. I didn't add it for the constructors, as we
only call these once.
Change-Id: I96231fcff8d10abe90cafde25a099a2db6ea9414
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11617
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
This never did any chunking, and sled (rightfully) performs really bad
if values get too large.
We switched the default to using the objectstore backend with the local
filesystem a while ago, no need to keep this footgun around anymore.
Change-Id: I2c12672f2ea6a22e40d0cbf9161560baddd73d4a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11616
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We already have the same code in make_grpc_path_info_service_client.
Change-Id: Ibcd60831af8a061a2c3bb2f960f52a43d06cf6fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11615
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This specifically allows subsequent fetch calls in the REPL to avoid
fetching the same path twice (because they share the same
PathInfoService).
Change-Id: Ieda089080174913a8c014f13d6852cac599a7e17
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11484
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: aspen <root@gws.fyi>
We reuse the prev_name allocation for Entry, instead of allocating and
returning a separate Vec.
We encode the `prev_name: None` case as an empty vector, since we don't
allow empty names anyway, and the sorting is equivalent.
Change-Id: I975b37ff873805f5ff099bc82128706891052247
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11607
Reviewed-by: Brian Olsen <me@griff.name>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
For small bytestrings (like NAR names), we can read into a preallocated
fixed-size buffer, instead of allocating a Vec every time.
Change-Id: Id8da9e9cea99c814361230c0ec02606b731c79a3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11606
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
We don't actually build up names in place here, so we don't need a
capacity field. Saves 8 bytes.
Change-Id: Icb01b45561e28fd525b726612f56d4640bc834c7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11604
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
If our underlying reader supports AsyncBufRead, then we can too.
Change-Id: If4b948c983400ca591c1c475bbcf7dc00d562040
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11545
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Even if we have an aligned (or zero) size (and thus have no padding),
we may still have a non-padding trailer.
Since an exact read of only the user data bytes must always read the
trailer bytes as well, this has to happen for aligned sizes too.
For zero-sized trailers, we solve this by reading immediately, since no
read is required of the user at all.
user_len thus becomes a NonZeroU64, and the definition of "body data"
is adjusted to always exclude the final block.
Change-Id: I2c6bb51270fb22ad72a65076a3468673ab56ef68
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11597
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
We're using this in the NAR reader now.
Change-Id: I28f17b1ccedd62ffcaf2fa32b517f16bcd036d94
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11603
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
We specifically structured the code this way to allow using
`this.filled` as-is, so we should use it.
Change-Id: I7e11bddceb4d5f37b1dd4c453a9d53b85fc1f6c8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11602
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Rust 1.77 supports async recursion as long as there is some form of
indirection (ie. `Box::pin`). This removes the need to use the
async-recursion crate.
Change-Id: Ic9613ab7f32016f0103032a861edff92e2fb8b41
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11596
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Rename read_nar to ingest_nar, and have it use the async nar reader
version, and the ingest_entries machinery.
This means we can now drop all code dealing with manually assembling
castore nodes.
Update our consumer, NixHTTPPathInfoService to use the new API.
As we now accept an AsyncRead, we don't need to do any blocking here
anymore, and can use the same async-compression crate as in the fetching
logic (and support some more compression formats out of the box).
Change-Id: I8646d20bd8603f8da47b5c84bc9e4ac236eb7f1a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11580
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Once we break out with the root node, there may be no more elements in
the stream.
Change-Id: I6f5fc5662095aa2b2a56bcad506d25520d9ad00c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11592
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We got away with not properly dealing with this for the archive case,
where everything is contained inside a toplevel dir, but NARs can encode
a single file/symlink.
Properly break if the IngestionEntry path has the ROOT as parent, and
only create filling directories in the other case.
Change-Id: Ib378d0d1040de7c3fe310912a0b0488c55afee83
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11590
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
There's no need for this to be a &PathBuf.
Change-Id: I2d4126d57cfd8ddaad5dd327943b70b83d45c749
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11589
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This is a first cut at the async NAR reader, with some rough edges.
Poisoning is left unimplemented for now, pending future work.
Change-Id: Ifaafe0581a5e0e165a13357b909fb441f7bd8bab
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11524
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This allows using BytesReader with a custom tag, eg the closing parens
for the NAR reader.
No public constructor is provided for custom-tagged readers, since this
feature isn't public API.
Change-Id: I82e73d064edc4b6783ead1d6fe46a5b35f45c844
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11543
Reviewed-by: Brian Olsen <me@griff.name>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
We implement DirectoryService for Arc<DirectoryService> and
Box<DirectoryService>, this is sufficient.
Change-Id: I0a5a81cbc4782764406b5bca57f908ace6090737
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11586
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Write this a bit more compact, by using map_err(|e| …) and ?.
Ideally we'd get rid of the error mapping entirely, by using proper
error types, but that's left for a followup.
Change-Id: I68dc72b162ac89c5ff82d8c2bc26e1c808a0affd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11584
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
The emulator and bigtable client are quite big. Remove them from the
default //tvix:shell.
Put the tests behind a `integration` feature flag, and add a variant
with that enabled to CI, and drop the bigtable tools from //tvix:shell.
Change-Id: Ie042097a0d6fc26542faa96c139b77298ccb160a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11582
Reviewed-by: edef <edef@edef.eu>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Since a recent nixpkgs bump bringing a version of cargo with
https://github.com/rust-lang/cargo/pull/12914,
crate2nix creates a crate-hashes.json with all crate hashes from
Cargo.lock (and downloads a lot of stuff while producing it).
https://github.com/nix-community/crate2nix/pull/341 prevents this from
happening, but our hardcoded crate2nix pin prevented us from getting the
fix included in 0.14.0, which did land in nixpkgs.
Replace the pin with a simply override, carrying our only leftover patch
on top of it, and link to that PR.
Change-Id: I9503898e15d61fa6a2b1589d141bec1b4ed3d616
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11581
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This documents which Nix version uses which daemon protocol version so that
any implementor of the protocol can make informed choices about how far back to
support legacy.
Change-Id: If2fc11702f7f731816d51928efc9ea9d939e1c00
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11579
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This switches from using std::path::Path to using castore paths.
We can drop some error handling in descend_to, as absolute (or redundant)
paths are not representable.
We however now need to convert from a std::path::Path to our
representation, and decide to accept .. canonicalization, as paths in
EvalIO might contain this. Dealing .. to hop into another store path, if
we encounter this, should be dealt with in a previous step.
Change-Id: I5e94693808420c5d56587c68731252b54755bf93
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11575
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This allows converting from std::path::Path to castore PathBufs.
A flag is present to control .. canonicalization, and the usual caveats
about platform-specific differences apply.
Currently only added for unix, we'll carefully consider other platforms
on a case-by-case basis.
Change-Id: If289a92f75a2e5c3eec132b6a91a28d225fc1989
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11577
Reviewed-by: edef <edef@edef.eu>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
There's no need for us to come up with our own names for this.
Also update the comments/docstrings a bit, and inline the intermediate
hash_derivation_modulo calculation.
Change-Id: I09dab8ffe1ebfb6601841e98119eee4ff25d8f39
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11578
Reviewed-by: edef <edef@edef.eu>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This allows using both Path and PathBuf in a function argument taking
`impl AsRef<Path>`.
Change-Id: Ibd3ba6fac538069d2fe729d1ef399fdef301668f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11574
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
These are fallible methods, so they should be named accordingly.
Change-Id: I6dc271c42989dd6500173488190f65381835d6fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11572
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The empty path (Path::ROOT) is explicitly a valid path, and "foo" is
simply a child of "". The root itself is the only path without a parent.
Change-Id: Iff00dc8aed89eaf98702b664c0df658bd5a1d88a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11569
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Use the shared code for validating node names, since that is what path
components represent.
Change-Id: I12109c1306b224718faa66cf1f2874c78c1436a7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11566
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Since PathBuf doesn't have inherent methods anymore, these just forward
to Path itself.
Change-Id: I30f44adc9994337c367bad985ada0e8fcb98dd6a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11570
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Nix 2.4 accidentally permitted this behaviour, but the revert came
too late to beat Hyrum's law. It is now considered permissible.
Link: https://github.com/NixOS/nix/pull/9867
Change-Id: Ie97777af6765fe1c12c8aa593afe1c9b69125775
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11553
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
We implement Debug explicitly, so that we don't just see raw integers.
Change-Id: I11213094728f3e0c674562ee71c092a950041632
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11565
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This contains Path and PathBuf, representing platform-independent paths
representable by the castore model.
These are always relative, and platform-independent, which distinguishes
them from the ones provided in the standard library.
A subsequent CL will move IngestionEntry (and more) to use them.
Change-Id: Ib85857f4159ebc2f3c00192c95d4e5b54ffd4fcf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11558
Tested-by: BuildkiteCI
Reviewed-by: edef <edef@edef.eu>
The sled backend doesn't perform very well with blobs in there,
especially as it's not doing any chunking.
Switch to the `objectstore+file://` instead, which does do CDC.
Change-Id: Ic0d8836c6fc811b80c7202e3ee7f44a05a4f8dfa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11554
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Have ingest_entries return an Error type with only three kinds:
- Error while uploading a specific Directory
- Error while finalizing the directory upload
- Error from the producer
Move all ingestion method-specific errors to the individual
implementations.
Change-Id: I2a015cb7ebc96d084cbe2b809f40d1b53a15daf3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11557
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We shouldn't try to represent non-representable things in the ingestion
entries (only to throw an error).
It's cleaner to throw the error directly in the part producing the
stream.
Change-Id: I6b6f6d8c2f677425210142a39f1829ddeefec812
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11556
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: firefly <firefly@firefly.nu>
This is only useful for when we have access to a filesystem, so it
shouldn't be in the root.
Change-Id: I9923aaed1aef9d3a1e8fad41f58821d51c2eb34b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11555
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: firefly <firefly@firefly.nu>
Tested-by: BuildkiteCI
These can be arbitrary bytes in theory. Some of our libraries might
be more strict, or inconsistent w.r.t. their representation of path
separators.
Change-Id: I7981b74fc7d3dd79f5589cf2ef52ced7b71dd003
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11551
Tested-by: BuildkiteCI
Reviewed-by: edef <edef@edef.eu>
The one for `fs` was wrong, and ended up being attached to ingest_path,
and the one for `archive` was missing entirely.
Change-Id: I8a4c32fb5293badb1ea0764c278a88e4ca33c018
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11552
Tested-by: BuildkiteCI
Reviewed-by: edef <edef@edef.eu>
u64 is an inappropriate type for something memory-sized, and most
callers end up with off-by-ones when using `..` rather than `..=`,
including the tests for the module itself.
Change-Id: If3b7bea27eb0a6c01e0a5d7e64966acbbb664268
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11550
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
These may as well be inlined, and hardly need tests, since they just
alias AsyncReadExt::read_u64_le / AsyncWriteExt::write_u64_le.
Boolean reading is worth making explicit, since callers may differ on
how they want to handle values other than 0 and 1.
Boolean writing simplifies to `.write_u64_le(x as u64)`, which is also
fine to inline.
Change-Id: Ief9722fe886688693feb924ff0306b5bc68dd7a2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11549
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Prior to this, some tests would not build
or would fail in an obscure way.
Change-Id: I68587cc7592492ebfd71ca02fc7ccc9ff7c0196f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11544
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This is also needed to make `<nix/fetchurl.nix>` available in the
testsuite.
At some point, we might want to classify different types of tests
excepting a different featureset, but for now, enabling this for all of
glue is fine.
Change-Id: Ided450bbb1f8eb7b66d454bd28bd19b17eb318e4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11546
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This makes `<nix/fetchurl.nix>` available in the testsuite.
Change-Id: I04657b227c539edec86e5b6033e1016adcfce244
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11537
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
with_size only existed to allow separating the phases of reading size
and reading data, and similarly the Size state only existed to allow
folding size reading into poll_read.
Neither of these are necessary if we make the constructor async,
and handle the size reading there.
As a bonus, this makes BytesReader::len sensibly typed, and permits
implementing is_empty, as Clippy demands of us.
Change-Id: I72173ec06d60b7998d16a3ecfc5e6ac5424bbed3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11542
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The tarball can also not be compressed.
Change-Id: Idbf1b7168cc9a43826355e3cb8b4140f5f53d780
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11535
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We don't actually hold a Tag, we just want to bind the type.
Change-Id: Ida67c026f852ed54c3f18df914cf5c31e6227fd5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11541
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The (min, max) pair is already a RangeInclusive in essence, so we might
as well represent it that way.
Change-Id: I2f67f3c47dc36b87e866ff5dc2e0cd28f01fbb04
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11540
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The TrailerReader has no purpose separate from BytesReader, and the
code gets a fair bit simpler this way.
EOF handling is simplified, since we just rely on the implicit
behaviour of the existing case.
Change-Id: Id9b9f022c7c89fbc47968a96032fc43553af8290
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11539
Reviewed-by: Brian Olsen <me@griff.name>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The API is a bit odd here, because we don't have a distinct type for a
known-length reader.
Change-Id: I4a1dd07fbed0a400004dbe4aa2095c51898ad3bd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11538
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: Brian Olsen <me@griff.name>
The poisoning API is now always available, whether debug_assertions is
enabled or not. When debug assertions are not enabled, it is equivalent
to a unit struct, and is always considered ready and unpoisoned.
Change-Id: I950237f4816d480330d9acab32661ed4f1663049
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11525
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Prepare the NixAttr to return without an intermediate
Vec<(String, NixString)>, and without into_iter(), and send off the
unmoved Derivation struct to known_paths without having to clone it.
Change-Id: Icdb9f78938e998a27d0313c5d9ab15b93af5821d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11531
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: edef <edef@edef.eu>
This is specifically used for the fetcher code (only).
Moving it to there for now.
Change-Id: I1e1d0541b85340ef4ff3a4c6b3fa99b51853f539
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11532
Reviewed-by: edef <edef@edef.eu>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This brings feature parity with the tvix-store CLI command, at least as
far as logging (not tracing) is concerned.
Alternative to cl/11482, RUST_LOG seems to be the more canonical way to
influence this, and is consistent with how it's done in tvix-store.
Change-Id: I923a0b0ae55dc49af7efdacdcf5b1f24e561b3c2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11527
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This wasn't really used - to ingest logs in meachine-readable form, the
OTLP infrastructure is more suitable to provide structured logs than
parsing JSON from std{err}, as it also captures span information.
Also, the non-JSON output is a bit too spammy, as remarked in cl/11483 -
change it to `compact`.
Change-Id: I48007b84ba076ab566abbb6131a02868fe0eb397
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11526
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
We separate ingesting the trailer block into a Future of its own,
parametrised on the specifics of the trailer pattern.
This is intended to be used for future work on an async NAR reader,
which needs to read a terminating parenthesis as well as the regular
padding.
Thanks to @griff for suggesting separating the ingestion into its own
Future.
Change-Id: I36c2503baa67937046a63e9bf0cfc38201394025
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11522
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Pin<&mut T> is DerefMut when T: Unpin, so we don't actually need to
explicitly call get_mut.
Change-Id: Iaa312ec49c87100010e09c94f319e57e31da0cd5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11520
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
We don't use it in the reader anymore.
Change-Id: I98fe204a747711464e9e7ca17df06fa9854eb344
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11519
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
We now *never* return the final bytes until we've read the padding
in full, so read_exact is safe to use.
This is implemented by TrailerReader, which splits the phases of
reading (and validating) the final 8-byte block, and providing
the contained payload bytes to the caller.
Change-Id: I0d05946a8af9c260a18d71d2b763ba7a68b3c27f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11518
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
We already require R: Unpin in the constructor, so there's not much use
to pin projection.
Change-Id: Ia7bf734dc3aa86ffa6d1d5de778939baa9676bb9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11516
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This is semantically a RangeInclusive, since we can only have
0..=u64::MAX at most, and monomorphising on the bounds doesn't
buy us anything.
Change-Id: Ib601d7fd77d703d6c8c5ec27ac9e67bb122ce1c0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11515
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Adds debug assertions to ensure that the reader's variants are upheld.
If any of the following happens, then the currently in use reader must
be abandoned:
* A directory or file reader encounters an error
* A directory or file reader is dropped before being fully read from
Additionally, a directory reader must not be read from again after it
has returned None.
These checks are only used when debug_assertions are on, so vanish in
release mode.
Resolves two TODO items added by edef
Change-Id: I27bd9643a632798db5351957506c166b9bd5ca4e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11508
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: edef <edef@edef.eu>
Autosubmit: Aria Shrimpton <me@aria.rip>
Tested-by: BuildkiteCI
This contains a rough collection of ideas on the TODO list, trying to
keep track of it somewhere.
Change-Id: Ifc5b0cf9f7ac38f7a8e56515882bdf70e349544b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11512
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This is a ReadBuf, not a BufRead.
Change-Id: Ie80e894f4b24b77cdd60409ddfaa66dae0ffeec9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11511
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: edef <edef@edef.eu>
Tested-by: BuildkiteCI
The `Error` enum for the `imports` crate has both filesystem and archive
specific errors and was starting to get messy.
This adds a separate `Error` enum for archive-specific errors and then
keeps a single `Archive` variant in the top-level import `Error` for all
archive errors.
Change-Id: I4cd0746c864e5ec50b1aa68c0630ef9cd05176c7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11498
Tested-by: BuildkiteCI
Autosubmit: Connor Brewster <cbrewster@hey.com>
Reviewed-by: flokli <flokli@flokli.de>
Ingesting tarballs with a lot of small files is very slow because of the
round trip time to the `BlobService`. To mitigate this, small blobs can
be buffered into memory and uploaded concurrently in the background.
Change-Id: I3376d11bb941ae35377a089b96849294c9c139e6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11497
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: Connor Brewster <cbrewster@hey.com>
With `ingest_entries` being more generalized, we can now use it for
ingesting the directory entries generated from tarballs.
Change-Id: Ie1f7a915c456045762e05fcc9af45771f121eb43
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11489
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Doing the fetch comes up with the root node, but we still need to
descend from there to the desired subpath.
Move things around to ensure the fetch case also only sets root_node.
This logic should probably be moved into smaller, easier to consume
functions.
Change-Id: I6ab9317df794f53d2504029bbc77859e89fef1ed
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11507
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
We also need to rename the node in case it's a directory or symlink at
the root.
Change-Id: I6e9957200f65991645ae3e1755b943200453dfd5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11506
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Nix supports file:// - URLs for `fetchurl` and `fetchTarball`.
Convert the enums and function arguments to hold a URL type.
reqwest::Url is a re-export of the url crate, but they don't re-export
the parsing errors, and as we want to hold these in our Error types, add
it to Cargo.toml explicitly.
The Fetcher::download function now checks on the scheme, and either
opens the file locally, or does do a HTTP request as before.
Fetch gets its custom debug impl, removing potentially sensitive
username and password out of URLs.
Change-Id: I777db1fe487370e822cbfec4624034aca5e08045
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11504
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Have fetcher builtins call queue_fetch() whenever they don't need to
fetch something immediately, and teach TvixStoreIO::store_path_to_node
on how to look up (and call ingest_and persist on our Fetcher).
Change-Id: Id4bd9d639fac9e4bee20c0b1c584148740b15c2f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11501
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We actually want to delay fetching until we actually need the file. A
simple evaluation asking for `.outPath` or `.drvPath` should work even
in a pure offline environment.
Before this CL, the fetching logic was quite distributed between
tvix_store_io, and builtins/fetchers.rs.
Rather than having various functions and conversions between structs,
describe a Fetch as an enum type, with the fields describing the fetch.
Define a store_path() function on top of `Fetch` which can be used to
ask for the calculated store path (if the digest has been provided
upfront).
Have a `Fetcher` struct, and give it a `fetch_and_persist` function,
taking a `Fetch` as well as a desired name, and have it deal with all
the logic of persisting the PathInfos. It also returns a StorePathRef,
similar to the `.store_path()` method on a `Fetch` struct.
In a followup CL, we can extend KnownPaths to track fetches AND
derivations, and then use `Fetcher` when we need to do IO into that
store path.
Change-Id: Ib39a96baeb661750a8706b461f8ba4abb342e777
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11500
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This caught me by accident in an earlier revision of cl/11500 -
I had a `NixString`, wanted to return it as a `String`, so I was naively
calling `s.into()`.
That unfortunately gave me the `Display` implementation of `NixString`,
which quotes strings, causing an annoying error further up the stack.
NixStrings are bytes, we can keep the impl From<NixString> for BString,
but having a `.into()` suddenly do quoting is more than unexpected.
Change-Id: I5434ba94bfe6c493d0a57e68225ecc22daa4b948
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11505
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This makes the eval tests and benchmarks standalone Nix derivations and
readTree targets:
```
nix-build -A tvix.cli.eval-nixpkgs-cross-hello-outpath
nix-build -A tvix.cli.benchmark-nixpkgs-attrnames
```
Even without doing any fetches, We need to set `SSL_CERT_FILE`, so
reqwest is able to load its CA roots.
Change-Id: Ib45282d01044165c7816391adbeeb26334f8e924
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11493
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We can speedup uploads further by not uploading all store paths
sequentially, but in parallel.
We still don't respect the reference graph, so nothing changed here.
Change-Id: I40edb5725fe7a15170f5b9f8f4c8bec2130ecca3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11492
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Rather than carrying around an Future in the IngestionEntry::Regular,
simply carry the plain B3Digest.
Code reading through a non-seekable data stream has no choice but to
read and upload blobs immediately, and code seeking through something
seekable (like a filesystem) probably knows better what concurrency to
pick when ingesting, rather than the consuming side.
(Our only) one of these seekable source implementations is now doing
exactly that. We produce a stream of futures, and then use
[StreamExt::buffered] to process more than one, concurrently.
We still keep the same order, to avoid shuffling things and violating
the stream order.
This also cleans up walk_path_for_ingestion in castore/import, as well
as ingest_dir_entries in glue/tvix_store_io.
Change-Id: I5eb70f3e1e372c74bcbfcf6b6e2653eba36e151d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11491
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This function was originally called `read_to_string` but was changed to
`open` to make it so that file contents aren't always held in memory.
A comment and error message were not updated to reflect the new name of
this method.
Change-Id: I3d86e2f6d7006c2e1513121fc3c62efcb7e7b9bb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11495
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Fixes some build warnings that only happen when building in release mode
which disables `debug_assertions`.
Change-Id: I554d5fce7c869c23cf4aa93179f0ee9f7f7c834e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11490
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: Connor Brewster <cbrewster@hey.com>
Reviewed-by: flokli <flokli@flokli.de>
`ingest_entries` requires that all directories referenced by entries in
the ingestion stream have an explicit entry in the stream.
For example, if the stream contains a file with path `foo/bar`, there
must be an entry that comes later in the stream for the directory `foo`.
Change-Id: I61b4fbbb73ea7278715e04271d8073b484e05e61
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11488
Autosubmit: Connor Brewster <cbrewster@hey.com>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Implement a first pass at the fetchTarball builtin.
This uses much of the same machinery as fetchUrl, but has the extra
complexity that tarballs have to be extracted and imported as store
paths (into the directory- and blob-services) before hashing. That's
reasonably involved due to the structure of those two services.
This is (unfortunately) not easy to test in an automated way, but I've
tested it manually for now and it seems to work:
tvix-repl> (import ../. {}).third_party.nixpkgs.hello.outPath
=> "/nix/store/dbghhbq1x39yxgkv3vkgfwbxrmw9nfzi-hello-2.12.1" :: string
Co-authored-by: Connor Brewster <cbrewster@hey.com>
Change-Id: I57afc6b91bad617a608a35bb357861e782a864c8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11020
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Explicitly document and add a debug assertion for that.
It's up to callers to ensure this doesn't happen.
Change-Id: Ib5d154809c2ad2920258e239993d0b790d846dc8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11487
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Move error types and filesystem-specific functions to a separate file,
and keep the fs:: namespace in public exports.
Change-Id: I5e9e83ad78d9aea38553fafc293d3e4f8c31a8c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11486
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
This is not a stream of direntries anymore, but a stream of ingestion
entries.
Change-Id: I387f4497b6567066b24c58ca0262e710348180e9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11485
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Previously the store ingestion code was coupled to `walkdir::DirEntry`s
produced by the `walkdir` crate which made it impossible to reuse
ingesting from other sources like tarballs or NARs.
This introduces a `IngestionEntry` which carries enough information for
store ingestion and a future for computing the Blake3 digest of files.
This allows the producer to perform file uploads in a way that makes
sense for the source, ie. the filesystem upload could concurrently
upload multiple files at the same time, while the NAR ingestor will need
to ingest the entire blob before yielding the next blob in the stream.
In the future we can buffer small blobs and upload them concurrently,
but the full blob still needs to be read from the NAR before advancing.
Change-Id: I6d144063e2ba5b05e765bac1f27d41b3c8e7b283
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11462
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This adds `Directory::add` which is a convenience helper for adding
nodes into a `Directory` while preserving sorted order.
This implements `Ord` and `PartialOrd` for `FileNode`, `SymlinkNode`,
and `DirectoryNode` so `binary_search` can be used.
Change-Id: I94b86bdef5d0da55aa352e098988b9704cafca19
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11481
Autosubmit: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This is especially nice, as it allows us getting rid of the other
versions of proc-macro2 and quote.
Change-Id: I9fdd012ee6c0ded3e18ec30504b83ac2032d1390
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11474
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Also, rename the DUMMY_NAME constant in the fixtures to DUMMY_PATH,
which aligns more with the ToString representation and from_bytes
conversions we have on StorePath[Ref].
Change-Id: I39763c9dfa84c5d86f2fd0171b3a4d36fd72f267
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11464
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
There's no point in not enabling these, and rust-analyzer is quite
useless too.
nix-compat users outside of here can still explicitly disable default
features if they don't want to pull in these features.
Change-Id: I8f2f24e7734ad152d1733bc3421098fc91af290a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11455
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This makes use of the vmCmdline and assertVMOutput to boot a NixOS VM
off of `tvix-store virtiofs` have it write a message on successful
bootup, then have it shut down again.
We check we see the message in the output.
Seeding the store with the closure it's what's currently taking most
of the time (as it's all linear still), so log a message before booting
the VM.
Change-Id: I6887d935f589eb0ad6507033c01337e1ec500a0b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11191
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Userland likes to seek backwards, and until we have store composition
and can serve chunks from a local cache, we need to buffer the
individual chunks in memory.
Change-Id: I66978a0722d5f55ed4a9a49d116cecb64a01995d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11448
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This makes it easier to separate concurrent requests on the same inode.
Change-Id: I7637c1d889336beeb0d186182ce22fbf60fd16c3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11447
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
The docs state we must fill all of the buffer, except on EOF.
Change-Id: Id977ba99c0b15132422474ebbf82bb92b79d55ba
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11446
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
When (re)initializing a chunked reader, we were erroneously skipping the
first n bytes from all chunks, not just the first one.
Fix this, by passing in an enumerated list of chunks, and only calling
SeekFrom::Start() on the first chunk in the stream.
With this, I'm able to invoke b3sum on bin/bash successfully.
Change-Id: I52ea480569267e093b0ac9d6bcd5c2d1b4db25f7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11443
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Increase the discard_buf to 4096 (as I've seen this size).
Use the ready! macro to propagate pendings.
Make it more clear what exactly should be skipped in total, and what
during the current iteration.
Also write down that poll_read call already takes care of updating
self.pos, as I ran into that trap earlier (and added it here).
Change-Id: I2d22e1c8a835c0f3dd0c648917009b2bad4fd57c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11442
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
If the resulting offset equals to our current position, there's no need
to recreate a reader.
Change-Id: I855f0c79c514c16ca48a78e12978af2835fbbd6a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11441
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
State that this case applies if the blob is small enough to fit inside a
single chunk.
Change-Id: I0383514729e686799599b629cf1303b284147bb4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11440
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We previously returned Ok(None) when being asked for more granular
chunking info, signalling the blob does not exist at all.
This is however incorrect, we should return an empty Vec instead, as
documented in the trait.
Change-Id: I83ecc2027e0767134c7598792c2ee6d964853c66
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11439
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
It's perfectly normal if we ask for more granular chunking info and the
backend responds it does not have it.
Change-Id: I593ab3e53b4f4e70c99f39b266546d2ac8eb10c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11437
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We're receiving bytes over the wire, and encode them the same way
B3Digest does internally, but don't use it for formatting, as we're
discarding that string.
In case the sent bytes don't have the right length, the string will be
short, but it's better to still have it as a field, even if it's not a
valid b3 digest.
Change-Id: I6ef08275d51c8a0d98f5e46844b15dfd05d17cd8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11436
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
These were copying unnecessarily. Instead, have a
InodeData::from_node(), which *consumes* the Node entirely, returns
`InodeData` and the split-off name (which is not part of InodeData).
Callers can then use the result in various helper functions, like:
- InodeData::as_fuse_type
- InodeData::as_fuse_file_attr
- InodeData::as_fuse_entry
… to prepare their replies to the kernel.
This removes not only a bunch of clones, but also a lot of copy-pasted
code.
Change-Id: Idbca5f25cc29e96c1f4c614b33dff2becb0a8738
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11435
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Use a proper graph library to ensure all nodes are reachable from the
root.
We had a bit of that handrolled during add(), as well as later, which
had an annoying bug:
Redundant nodes were omitted during insert, but when returning the list
during finalize, we did not properly account they need to be introduced
before their parents are sent.
We now simply populate a petgraph DiGraph during insert (skipping
inserting nodes we already saw), and use petgraph's DfsPostOrder to
traverse the graph during finalize.
If the number of returned indices equals the total number of nodes in
the graph, all nodes are reachable from the root, we can consume the
graph and return the nodes as a vec, in the same order as the traversal
(and insertion).
Providing a regression test for the initial bug is challenging, as the
current code uses a bunch of HashSets. I manually tested ingesting a
full NixOS closure using this mechanism (via gRPC, which exposes this
problem, as it validates twice), and it now works.
Change-Id: Ic1d5e3e981f2993cc08c5c6b60ad895e578326dc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11418
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Have a Option<Box<dyn DirectoryPutter>>, which is lazily initialized
whenever we first want to upload a directory.
Have the loop explicitly break when it encounters the root_node, and
deal with the flushing after the loop.
Deal with the FUTUREWORK (assertion for root directory digest matching
what the DirectoryPutter returns).
Change-Id: Iefc4904d8b8387e868fb752d40e3e4e4218c7407
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11417
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Separate this a bit stronger from the main application flow.
Change-Id: I2e9bd3ec47cc6e37256ba6afc6e0586ddc9a051f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11416
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Align these names and comments with the two users, to make it more
obvious we're doing the same thing here, just use a different method to
come up with entries_per_depths.
Change-Id: I42058e397588b6b57a6299e87183bef27588b228
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11415
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This did very little, and especially the part of relying on the outside
caller to pass in a Directory if the type is a directory required having
per-entry-type specific logic anyways.
It's cleaner to just inline it.
Change-Id: I997a8513ee91c67b0a2443cb5cd9e8700f69211e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11414
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This makes it easier to understand the code.
Change-Id: I0a9047433000551a6ba1f50a8c5c93527bc86216
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11413
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We previously updated this.pos also in case the underlying read returned
an error.
Also, use the ready! macro to remove the match block, and instrument
errors returned during start_seek.
Change-Id: Ic32e26579d964a76b45687134acc48d72d67c36f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11421
Reviewed-by: Brian Olsen <me@griff.name>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
When a directory or file is open()'ed, we already put some data into
a lookup table, and subsequent operations then use the returned handle
id.
By also adding the span that's been created during these calls into the
lookup table, we can properly set the span parent for these requests,
nicely connecting the individual operations to the bigger picture.
Change-Id: Ia354842fccdbc7f45c2d3efda3acf058b2dbc48e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11429
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Brian Olsen <me@griff.name>
Instead of creating another child span, we can use
`tracing::Span::current().record(k,v)` to add an additional field to the
current span.
Change-Id: I337faac0e73a0da6eb0a52cb75c2e8c026eff774
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11428
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This currently shares some code with readdir, except it's also providing
a second `fuse_backend_rs::api::filesystem::Entry` argument to the
`add_entry` function call.
Refactoring this to reduce some duplication is left for a future CL.
Change-Id: I282c8dfc6a711d00a4482c87cbb84d4950c0aee9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11426
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Use rq.handle in `release` too, and remove interpolating it into the
log message itself.
Also update the comment, we don't get ownership, just simply drop, and
change the level to warn!, as suggested in cl/11425.
Change-Id: If4e6cff6d8b580671b1548ae3862851db4af6694
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11427
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Similar to how we already handle opening files, implement opendir/
releasedir, and keep a map of dir_handles. They point to the rx side of
a channel.
This greatly improves performance listing the root of the filesystem
when used inside tvix-store, as we don't need to re-request the listing
(and skip to the desired position) all the time.
Change-Id: I0d3ec4cb70a8792c5a1343439cf47d78d9cbb1d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11425
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This allows us acquiring the lock in sync code still. Also, simplify
some of the error handling a bit.
Change-Id: I29e83b715f92808e95ecb0ae9de787339d1a371d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11424
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
We can just pass an async move closure to `self.tokio_handle.block_on`
and make this a bit shorter.
Change-Id: Iba674f34f22ba7a7de7c5bae59d64584884cb17c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11423
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This exposes `user.tvix.castore.{blob,directory}.digest` xattr keys for
files and directories:
```
❯ getfattr -d /tmp/tvix/06jrrv6wwp0nc1m7fr5bgdw012rfzfx2-nano-7.2-info
getfattr: Removing leading '/' from absolute path names
user.tvix.castore.directory.digest="b3:SuYDcUM9RpWcnA40tYB1BtYpR0xw72v3ymhKDQbBfe4="
❯ getfattr -d /tmp/tvix/156a89x10c3kaby9rgf3fi4k0p6r9wl1-etc-shells
getfattr: Removing leading '/' from absolute path names
user.tvix.castore.blob.digest="b3:pZkwZoHN+/VQ8wkaX0wYVXZ0tV/HhtKlSqiaWDK7uRs="
```
It's currently mostly used for debugging, though it might be useful for
tvix-castore-aware syncing programs using the filesystem too.
Change-Id: I26ac3cb9fe51ffbf7f880519f26741549cb5ab6a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11422
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
We don't need to copy if we explicitly say that the returned
Option<Path> may hold onto bytes from the passed in &DirEntry.
Change-Id: Ib46b6fd2f8f19a45f8bef79c4c1d2fa6b490cad7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11410
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
It was returning `{ line, col, file }` instead of `{ line, column, file
}`.
Note this is not a regression in Nix, Nix always had `column` since
2013.
Change-Id: I4871a201b32324dff0432526d0449806a535828f
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11409
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This tells josh to include the patch from
third_party/overlays/patches/cbtemulator-uds.patch at
nixpkgs/cbtemulator-uds.patch.
We then use the `additionalOverlays` feature introduced earlier, and
pass it an overlay adding the patch to `cbtemulator`.
This only gets applied if tvix/shell.nix is not called with a pkgs
argument, which is the case in the tvix view.
Change-Id: I7bc5543460ddd30325ab0998e891c15fcaf8bcfe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11408
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
While the compiler might realize it's a good idea to inline these,
especially considering this is in the same crate [1], it doesn't hurt to
add that annotation too.
Suggested in cl/11385.
[1]: https://nnethercote.github.io/perf-book/inlining.html
Change-Id: If679fce0e1aab9ec681ba60f689d386d6fd92d61
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11403
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
We should cap the time of a `cargo build && cargo test` to a reasonable
amount of time.
Change-Id: If618198459ac267f9f6d7eb60466534a95a95c2c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11404
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This is a stream of DirEntry, so let's call it direntry_stream.
Change-Id: I5b3cb4efba899d746393f75f6ece7eaa79424717
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11401
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Instead of using an additional Nix build producing a directory structure
containing xz-compressed NAR files and NARInfos, and uploading these via
`curl` to NAR-bridge, which then decomposes them and uploads them to
tvix-store, have tvix-store interpret the exported reference graph
directly, and deal with the uploading on its own.
Change-Id: I44ee0b132944c53d11abb688d2d017f0cc9c3d97
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11398
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This allows copying individual store paths from the local /nix/store
into tvix-store.
As we don't support getting this information from Nix yet, we currently
expect metadata to be provided externally:
Nix' `exportReferencesGraph` feature contains pretty much all data we
need for this. Expect a list of this information at a well-known key
(`closure`, similar to nixpkgs' `pkgs/build-support/binary-cache/
default.nix`).
We currently simply upload all store paths sequentially, without any
parallelism or awareness in how the reference graph looks like.
As long as the connected stores don't enforce this, this is fine, at
least for now.
Change-Id: Ib83c998465adddfdb110db994843c44e26b3d3d8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11397
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
`toJSON` transform a Nix structure into a JSON string.
For each context in that Nix structure, the JSON string must possess it.
Thus, it is necessary to take the union of all contexts and attach it to
the final structure.
Unfortunately, the return type of `into_json` is a serde's JSON object,
not a string. Therefore, it is not possible to reuse `NixString`
machinery.
Context tests are reinforced as Nix does not test those behaviors.
Fixes b/393.
Change-Id: I5afdbc4e18dd70469192c1aa657d1049ba330149
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11266
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
There's little reason to keep the nar writer using Async{Read,Write}
traits from futures, while everything else async in tvix (and
nix-compat) uses tokio.
Change-Id: I8cd1efcd0dd5bb76471de997603c7b701a5095de
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11391
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: Brian Olsen <me@griff.name>
This doesn't have much to do with the plain "wire" format, it's merely
one user of it.
Also, use the more "public" `wire::` API to read/write bytes, strings,
bools and u64s.
Change-Id: I98dddcc3004dfde7a0c009958fe84a840f77b188
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11390
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: Brian Olsen <me@griff.name>
Move everything bytes-related into its own module, and re-export
both bytes and primitive in a flat space from wire/mod.rs.
Expose this if a `wire` feature flag is set. We only have `async` stuff
in here.
Change-Id: Ia4ce4791f13a5759901cc9d6ce6bd6bbcca587c7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11389
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
We don't have it in all Cargo.toml files either.
Change-Id: Ifcb333a39603a7e402ab0068e0f0f1b5af769e13
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11388
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
Autosubmit: flokli <flokli@flokli.de>
This is another representation about information Nix has on a Store
Path. It's encountered in the exportReferencesGraph feature.
Change-Id: Ia0c08c369f4af9e50ebe3a5053bd98fadaa0003d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11396
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This actually does a bit of allocation. There's two Vecs, one for
references and one for signatures.
We can get rid of the Vec at nar_hash.
Change-Id: Ie025309b6678f83f5b961d49ff75dcfc7da145a1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11395
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
We use the (slightly more tolerant) from_str to deserialize, and
serialize out as SRI.
Change-Id: If76b0ed2d4e243904f02df34f6c90b976c0bab8c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11393
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Move the code implementing it from StorePath to StorePathRef, and have
the StorePath impls use that too.
Drop the debug_assert in every comparison - we have tests for this to
ensure it keeps working, and built up some confidence by piping a lot of
other store paths through it in the meantime.
Change-Id: I288bad3dfa597f68d63c4bcda7791f722b7a8ced
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11392
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Put behind the "cloud" backend, like in the `tvix-castore` crate.
Change-Id: Ib38d198baf11ab2a4b6dc405121676147c424611
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11362
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
We forgot to only write the part of the padding that has not been
written already.
Unfortunately it seems the tokio mocking thing does buffer small writes,
so the tests succeeds even with the bug :-/
Change-Id: I5a6cf04212d559728639427c57207094d507ec75
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11384
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: Brian Olsen <me@griff.name>
Autosubmit: flokli <flokli@flokli.de>
Right now `builtins.hashFile` always reads the entire file into memory
before hashing, which is not ideal for large files. This replaces
`read_to_string` with `open_file` which allows calculating the hash of
the file without buffering it entirely into memory. Other callers can
continue to buffer into memory if they choose, but they still use the
`open_file` VM request and then call `read_to_string` or `read_to_end`
on the `std::io::Reader`.
Fixes b/380
Change-Id: Ifa1c8324bcee8f751604b0b449feab875c632fda
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11236
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This adds a Directory service using
https://cloud.google.com/bigtable/docs/ as a K/V store.
Directory (closures) are put in individual keys.
We don't do any bucketed upload of directory closures (yet), as castore/
fs does query individually, does not request recursively (and buffers).
This will be addressed by store composition at some point.
Change-Id: I7fada45bf386a78b7ec93be38c5f03879a2a6e22
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11212
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
In case structured attrs is enabled, rather than adding a
space-separated list to the "outputs" environment variable, a "proper"
list is added to the JSON itself, at the "outputs" key.
Fixes b/395.
Reported-By: Alyssa Ross <hi@alyssa.is>
Change-Id: I2834ede9cfcf49d5e81e1056bf8f9bb9b65ddad8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11386
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Make it a bit more clear that this is the total padding length, not the
padding length we still need to write.
Change-Id: I9ff4aa16f256fda367b4b9295abf82ed01b1f989
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11383
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This is perfectly fine to track the position inside a reader too, so
rename it to reflect that.
Also make the docstring a bit less write-specific.
Change-Id: I831b0a8fe44a2477d4af96fefc692b9aabc378f1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11382
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We actually did construct other payload sizes than the test function was
intended to, because I'm too stupid to count. Fix that, and also update
a leftover _debug in a test name.
Change-Id: I1bff8551f2078afe82f789646b851f2fcff3e82c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11381
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Moving out the handshake route out of tvix-daemon to nix-compat.
We're bumping the protocol to version 37. It does not change anything
for us. Version 37 introduced a change in the build result
serialization. We do not implement that for now.
Tested tvix-daemon against Nix via the integration test to make sure
we did not break anything in the process.
Taking advantage of this refactor to remove the unused anyhow
dependency in tvix-daemon.
Change-Id: I8a2aad0b6dbb0aaa997446a612a365fd7d70336c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11379
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This allows using read_u64, write_u64, which is a bit easier to juggle
with.
Also, update names to align with the nix codebase, which makes it easier
to spot both the constant name as well as the value.
Leave the ASCII interpretation as a comment afterwards.
Change-Id: I0b9ab187acd22807e2785b0722aa4300dab37c51
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11378
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
`primitive.rs` implements reading and writing primitive (fixed-length)
types in the wire format, used in the the nix daemon protocol and NAR
format.
Move worker-protocol specific magic bytes to worker_protocol.rs (and
possibly further split there once needed)
Change-Id: If681c01e9460294619f1d000229b81f0ac745810
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11377
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This includes String, &str etc. An example testcase with &str is
provided.
Change-Id: I900186d6ceb52f52bd41ef4596524c1f5b52470b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11376
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Use the same EMPTY_BYTES trick from BytesWriter to write out the
padding, rather than allocating a Vec.
Change-Id: Ifb4ba1b45b7388adbc135fc8e46fd3d3cedd30aa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11375
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Only describe the format once (in `read_bytes`, and simplify the other
docstrings a bit.
Change-Id: Iff898f3c4173d506a357bc14bdffbf69c4c6e0e0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11374
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
This isn't used anywhere so far, and if someone really wants to, they
can simply make the range open-ended.
Change-Id: Iae9bcaa1f7ea032dd3ee76c8c142a38b6b72894d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11373
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Tested-by: BuildkiteCI
We were wrongly using `'de` as a lifetime for both `Deserializer` and
`StorePathRef`.
This prevented Deserializing into a struct containing `StorePathRef`.
See https://serde.rs/lifetimes.html#the-deserializede-lifetime, the last
part of the paragraph:
The 'de lifetime should not appear in the type to which the Deserialize
impl applies.
- // Do not do this. Sooner or later you will be sad.
- impl<'de> Deserialize<'de> for Q<'de> {
+ // Do this instead.
+ impl<'de: 'a, 'a> Deserialize<'de> for Q<'a> {
This fixes it, and adds a test, deserializing into a `Container` struct.
It also fixes the existing test cases, deserialize_ref was actually
deserialize_owned, and deserialize_owned didn't exist yet - but they
alone are not enough to provoke the lifetime issues.
Change-Id: Iaed2832998cae5f192eafe7fd5243e82ff6e051e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11372
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Add the primitives necessary to read the client settings from the Nix
daemon wire protocol.
Introducing the read_string primitive. This trivial primitive parses a
read_bytes call, check the bytes are valid utf-8 bytes and wraps the
result in a String.
Change-Id: Ie1253523a6bd4e31e7924e9898a0898109da2fa0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11358
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This (and more) should now be covered by the generic testsuite
(in crate::blobservice::tests).
Change-Id: Ib3afc4f19f7e37a561b7398d43663dc941971f5c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11365
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This deals with writing byte packets of larger sizes to an underlying
AsyncWrite.
Its constructor receives the expected size. It also deals with writing
padding if flush/shutdown is called after writing all the payload.
Change-Id: I8acbf992467f3862ffb8c7d669e8c0c8eced14c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11355
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Brian Olsen <me@griff.name>
Tested-by: BuildkiteCI
Have this return a StorePathRef<'_>, rather than a StorePath, and leave
it up to the caller to possibly convert it to a owned StorePath.
This avoids some allocations, if we only want to validate.
Change-Id: I5cf8e246fe02bd4e631f46a5cb86d3f77a728a0d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11361
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Let's make this usable for the entire crate.
Change-Id: I754408908a00296ee80dd52680f84b8a7cb22317
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11354
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
`appendContext s ctx` will just append a user-crafted context attrs to `s`.
The most important part of this builtin is to perform all the relevant invariant validations
to avoid letting the user craft invalid contexts which can never be built, e.g. invalid store paths,
inexistent derivations, etc.
This version is incomplete and full of TODOs, but passes all the Nix's
context strings tests, so we turn them on.
Change-Id: I625dc5e7c4f5b784f078b390f04b0ee5a8d65a7c
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11263
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Fixes b/392.
Output paths were created, depending on a plain store path but no
context string was attached to track that plain dependency.
Context string propagation tests are strengthened to prevent any
regression on this.
Change-Id: Ifd6671aeba6949324b0bb9f0f766b87db728d484
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11351
Reviewed-by: Alyssa Ross <hi@alyssa.is>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Actually these are all u64 LE encoded on the wire.
Change-Id: I5ca22c7639607ac47117cd946e036a444271885a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11348
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Using all the primitives recently implemented to nix-compat to reach
the point where the Nix client start to send us operation requests.
Using a small integration test script (or the VM test, but let's face
it, it's too slow to be useful), we manage to reach the point where
we're able to read a store operation:
2024-03-21T18:53:27.624876Z INFO tvix_daemon: Incoming connection addr=unix
2024-03-21T18:53:27.625312Z INFO worker:perform_init_handshake: tvix_daemon: Trust sent conn=Connection(unix) conn=Connection(unix)
2024-03-21T18:53:27.625406Z INFO worker: tvix_daemon: Client hanshake succeeded conn=Connection(unix)
2024-03-21T18:53:27.625488Z INFO worker: tvix_daemon: Operation received op=SetOptions conn=Connection(unix)
We had to take some shortcuts wrt. stderr/log management. The CPP Nix
codebase is a bit confusing in that area. I'll need to spend more time
reading this to fully understand what's happening there. For now,
sending the STDERR_LAST command to the client does the trick.
Change-Id: I9b0e20a52d885e64fe29188496aac5334de61edd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11233
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This is used by the nix client to determine whether or not the daemon
trust it. The trust conditions check are daemon-specific, hence not
part of nix-compat.
Change-Id: Icbcba2f7f1fd58f67e7da72d22a264f5a3f3619d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11231
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Write counterpart of read_bytes. Despite its name, we mostly use it to
write strings (as in ascii strings) to the wire.
We also extract the padding calculation in its own function.
Change-Id: I8d936e989961107261b3089e4275acbd2c093a7f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11230
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Now, it supports almost everything except `recursive = false;`, i.e. `flat`-ingestion
because we have no knob exposed in the tvix store import side to do it.
This has been tested to work.
Change-Id: I2e9da10ceccdfbf45b43c532077ed45d6306aa98
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10597
Tested-by: BuildkiteCI
Autosubmit: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: flokli <flokli@flokli.de>
Instead of enforcing NAR SHA256 all the time, we generalize the
`PathInfo` constructor to take a `CAHash` argument which can drive
whether we are having a flat, NAR or text scheme.
With this, it is now possible to implement flat schemes in our
evaluation builtins, e.g. `builtins.path`.
Change-Id: I15bfee0ef4f0f428bfbd2f30c57c012cdcf6a976
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11286
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Bump to the latest u-root release. This seems to be compatible with go
1.22, too, which previously segfaulted the compiler in cl/11289.
Change-Id: Ie8a0d3cb51a435d6a0b194b38a9c83ee260618df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11291
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This builtin only transforms any `NixContextElement::Derivation` into the trivial `NixContextElement::Plain`.
This is a forgetful functor on derivation-deep context strings.
The test coverage of this change is done in cl/11264.
Change-Id: Icd00778c97766be6db8a6bdabaa59e9724353ec5
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11262
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Derivation that depends on `${d.drvPath}` generates a `NixContextElement::Derivation(drvPath)` context string.
In turn, this makes the dependent derivation depend on *ALL* outputs of that derivation.
Note that a dependency on `${d.drvPath}` generates an input source
dependency too.
This is a complete implementation of the context string system in Nix on
the "input population" side.
The test coverage of this change is taken care in cl/11264.
Change-Id: I97fe5f7c772a6b1cc4366bee071aa691a11fcde6
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11261
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Nixpkgs make use of it and this is a 2.3 builtin that was missed.
Change-Id: If36d748eed4a5f777344556c0802392c76c8d53c
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11260
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Make this function async, and do the block_on on the (single) callsite.
Change-Id: Ib8b0b54ab5370fe02ef95f38a45d8866868a9d60
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11285
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Replace the (single) callsite with some code interacting with the tokio
runtime to block on the async version.
Change-Id: I3976496ae77b2bb8734603f303655834265e3f0a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11284
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Let's get rid of these sync helpers, they make this less understandable.
Change-Id: I3c7294647849db2747762722247c65e4e2947757
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11283
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
We need to define behaviours and add tests for these.
Change-Id: Id5825fafbf47897d8de42503ea6006eb131b1082
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11281
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This drops pretty much all of castore/utils.rs.
There were only two things left in there, both a bit messy and only used
for tests:
Some `gen_*_service()` helper functions. These can be expressed by
`from_addr("memory://")`.
The other thing was some plumbing code to test the gRPC layer, by
exposing a in-memory implementation via gRPC, and then connecting to
that channel via a gRPC client again.
Previous CLs moved the connection setup code to
{directory,blob}service::tests::utils, close to where we exercise them,
the new rstest-based tests.
The tests interacting directly on the gRPC types are removed, all
scenarios that were in there show now be covered through the rstest ones
on the trait level.
Change-Id: I450ccccf983b4c62145a25d81c36a40846664814
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11223
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
As for grpc_pathinfoservice, we test this in the rstest-based tests,
with more implementations.
tests/utils.rs is unused now.
Change-Id: I62b192170d181e4fb432bf7dfff2057cb048b52c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11279
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Remove usage of the gen_{blob,directory}_service() helper functions
from utils. We populate Memory{Blob,Directory}Services here directly, as
test_case and rstest doesn't compose well.
Change-Id: I0fb48aadb8c818f508b18ceb83c85eb91359442a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11278
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Previous CLs ensured BlobService and DirectoryService is implemented on
AsRef<dyn BlobService> and AsRef<dyn DirectoryService> respectively, so
there's no need to require AsRef in here.
Change-Id: I1e8b93188ca784e1b9a592f3d35fcf6b9df75c75
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11275
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This stops using the gen_{blob,directory}_service() functions from
tvix_castore::utils in favor of the rstest-based fixtures.
Change-Id: I4c2fff2926f34af63d3bd5c29c8e939dbdf7e062
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11274
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This introduces rstest-based tests. We also add fixtures for creating
some BlobService / DirectoryService out of thin air.
To test a PathInfoService, we don't really care too much about its
internal storage - ensuring they work is up to the castore tests.
Change-Id: Ia62af076ef9c9fbfcf8b020a781454ad299d972e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11272
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This makes the fixture more use-able when interacting with the trait,
the Bytes are only useful for the gRPC version.
Change-Id: Iaaea1adc6df18491f236a28c4343f5b4ee5fcfd3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11271
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This allows StorePathRef as keys in a hashmap, by deriving Hash. The same is already done for StorePath.
Change-Id: I3fc54c45787948116dcb27dfb5dc806b9b505835
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11269
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This allows us to use containers around BlobServices as BlobServices too.
Change-Id: I3c7feb074f42b4e07c550fb8dfa63cf81d448ab5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11249
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This creates test scenarios (using the DirectoryService trait) that we
want all DirectoryService implementations to pass.
Some of these tests are ported from proto::tests::grpc_directoryservice,
which tested this on the gRPC interface (rather than the trait),
some others ensure certain behaviour for which we only recently
introduced general checking logic (through ClosureValidator).
We also borrow some code related to setting up a gRPC DirectoryService
client (connecting to a server exposing a in-memory DiretoryService)
from castore::utils, this will be deleted once it's all ported over.
Change-Id: I6810215a76101f908e2aaecafa803c70d85bc552
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11247
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This allows us to use containers around DirectoryServices as DirectoryServices too.
Change-Id: I56cca27b3212858db8b12b874df0e567dd868711
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11248
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This uses DirectoryClosureValidator for validation and the sled batch
API to insert multiple directories at once.
Change-Id: I2d6dc513ccbc02e638f8d22173da5463e73182ee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11222
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This greatly simplifies the code in this function, replacing it with a
much better tested (and more capable!) version of the validation logic.
It also enables the gRPC server frontend to make use of the
DirectoryPutter interface. While this might not be too visible in terms
of latency thanks to gRPC streams bursting, it also enables further
optimizations later (such as bucketing of directory closures).
Change-Id: I21f805aa72377dd5266de3b525905d9f445337d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11221
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This simplifies a bunch of code, and gets rid of some TODOs.
Also, move it out of castore/utils, and into its own file.
Change-Id: Ie63e05a6cdfb2a73e878cf7107f9172aed1cdf13
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11224
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
This can be used to validate a Directory closure (connected DAG of
Directories), and their insertion order.
Directories need to be inserted (via `add`), in an order from the leaves
to the root. During insertion, we validate as much as we can at that
time:
- individual validation of Directory messages
- validation of insertion order (no upload of not-yet-known Directories)
- validation of size fields of referred Directories
Internally it keeps all received Directories (and their sizes) in a HashMap,
keyed by digest.
Once all Directories have been inserted, a drain() function can be
called to get a (deduplicated and) validated list of directories, in
from-leaves-to-root order (to be stored somewhere).
While assembling that list, a check for graph connectivity is performed
too, to ensure there's no separate components being sent (and only one
root).
It adds a test suite for these cases, which is much nicer to test than
where we previously had these checks (only in the gRPC server wrapper).
Followup CLs will move the existing putters to use this.
Change-Id: Ie88c832924c170a24626e9e3e91d868497b5d7a4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11220
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
We need to ensure the Directories are successfully uploaded before doing
any testing with them.
Change-Id: Iafa8deb86b3d5eb302ebfba3ced34385f67a7229
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11244
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We tried to be more strict than Nix, actually detecting if multiple
hashes were specified, or other garbage at the end.
However, Nix seems to just chop off at the end, so happily accepts
anything afterwards.
Example: https://github.com/NixOS/nixpkgs/pull/298041
Example: https://github.com/NixOS/nixpkgs/pull/298052
Change-Id: I2c1a49f51c8f8589a84df2fbf148e67e7380b550
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11234
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This allows these messages to be put in HashSets.
Change-Id: Ia58094cafe53eb624578821d3d8d969c5d21a1d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11219
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Log the entire span with "trace" level, not just its `ret` level.
The level of the error value event defaults to ERROR, so we don't loose
these.
B3Digest implements Debug and Display the same way, so we can omit the
`(Display)` part in `ret(Display)` for them.
Change-Id: Id00d123a5798e5bdc9820dd97ae2b4d4eb5455f0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11218
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This is no public API to construct this, there's exactly one caller,
and it's perfectly fine to directly populate the struct there.
Change-Id: Idae43a0162ee9bc687d21c550e0c9df33f12d263
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11217
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This makes it easier to see what's going wrong when uploading multiple
Directories.
Change-Id: Ieb71424b9761777c5f719b2f365962644de82baf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11209
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
We had max_level_debug, not max_level_trace, so it was not possible to
have `RUST_LOG` emit trace-level values (at least for our crates).
release_max_level_info still controls the level for release builds, so
that's not affected.
Change-Id: I1f127ab63f13b1622d6616e06759a9414d9bb201
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11208
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
This functionality is provided by the object store backend too
(using `objectstore+file://$some_path`).
This backend also supports content-defined chunking and compresses
chunks with zstd.
Change-Id: I5968c713112c400d23897c59db06b6c713c9d8cb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11205
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This controls whether tvix-castore has support for various cloud
backends or not.
Use this to control the set of feature flags for the object_store
backend, and only enable the aws, azure and gcp ones if it's set.
In the future this can be used to enable/disable other cloud backends
too.
Without feature flags, `object_store` already supports the `InMemory`
and `LocalFilesystem` backends, and we also want to unconditionally
enable the `http` one. Make sure at least the construction of these
services is covered in the tests.
Similarly, the tvix-store crate, which provides the tvix-store CLI has a
`cloud` feature flag too (defaulting to enabled).
Change-Id: I9fb9c87b740e7dc83f8ff7a0862905d036d513f2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11204
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
The rust trait was missing to document the order of the elements in the
stream. Document that, and also the reasoning behind this.
Change-Id: I27ef0b2020082783fc41c2015233175e2b8e716d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11203
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This will allow feature-flagging some of the backends.
Change-Id: Ie92914c3e2ad870eee87e73b3b5abe605fb56fe7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11202
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This will allow feature-flagging some of the backends.
Change-Id: Iddbdb89d3cf9c966a2c25b06b03e6917b284cae5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11201
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
This will allow feature-flagging some of the backends.
Change-Id: Idffbf8b3fd154f5a3d938225c3871feffea8ff8c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11200
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Setting the wire module as public to re-use it from tvix-daemon.
Change-Id: I570cffc480c7b784d813663f77572bbe9d4e8259
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11197
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The accompanying test case shows that we need to bubble up the catchable
error from the equality check if one is created.
Change-Id: Ic9929a57aa7653c8aa5a72d1711cf3264798c731
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11159
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
It is pretty pointless to force the function argument if we are going to
use a suspended call later since forcing the function may fail in ways
that are not covered by Catchables (non-recoverable errors, infinite
recursions). From this, it kind of seems as if using #[catch] is never
correct and should be replaced by #[lazy]. Also we should probably try
to come up with more test cases for stuff where laziness gets us out of
the jam as an equivalent to the catchable tests for nonrecoverable
errors.
Fixes b/386.
Change-Id: Ia926df4ac1b440ec430403ab7b40924a0c97221b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11153
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
This will give us the sha256: prefix, and hashes we're more used to, in
that context.
Change-Id: I72e42fe685e365ba9baa7cd81001387d239fa7c8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11194
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Ensure consistent formatting of blake3 digests.
It looks like we don't actually construct these error types anywhere, so
no code needs to be refactored to it currently, but still good to be
consistent.
Change-Id: I49dc8a7f3cb4245ac06b9a6a44b72060434a3d32
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11193
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We don't need to use BASE64 here on our own, B3Digest has a Display
impl.
This will also make sure the `b3:` digest is present in field values.
Change-Id: I0ce6ee0f7e7e99fb9b16872953a1b742e99be291
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11192
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
This can be used in the future to boot proper NixOS VMs, which want a
init= in their cmdline.
Change-Id: Iad4a25d5081f3a6af1c7f62f15853f3afaae4a0c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11190
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
We don't have a OTLP collector inside the Nix build, this removes some
noise from the log about not being able to reach it.
Change-Id: I058839c8f214821b536306c8c30e1a8e7192153b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11189
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This updates the parameters mkBootTest can be called with. It now
accepts a `path`, and then either importPathName needs to be set, or
isClosure needs to be set to true.
The former activates the existing functionality, tvix-store import is
used to import contents as a NAR-addressed store path.
The latter uploads the path as a closure (so including its references,
and keeping the store paths intact) to tvix-store.
We use nar-bridge, and the HTTP interface it provides to do this.
As `nix copy` can't be used inside a Nix build, we use
`pkgs.mkBinaryCache` to come up with the .narinfo and .nar files that
would be in a binary cache, and then use a bit of GNU Parallel and bash
to upload store paths ourselves.
Change-Id: Icfa5c0af0c22ab5418686947aa2c060f5987b873
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11188
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
We currently use a pretty big kernel to boot the tvix VMs, with a lot
of drivers.
It can probably be slimmed down significantly, at least on the hardware
driver and filesystem front.
Change-Id: I4c7f73fb2dafbf2bcdec8057d2b14a9b0e9b3275
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11187
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Fork off a long-living tvix-store daemon in the background, and have
both the import, as well as the virtiofs invocation connect to that one,
rather than use the underlying storage directly.
This also opens up the potential to have other things seed the store
(like nar-bridge).
Change-Id: Ie13aedaf7ab31e5ebe78a7be42f144af3920fa9c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11186
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Have derive_{blob,chunk}_path emit trace-level events for both the
values they're called with, as well as the return value.
With RUST_LOG in place, it doesn't get lost in other unrelated noise.
Change-Id: Id2451e3657324eff482841eb26a22d19e22bde30
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11136
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This allows selectively increasing the log level for only parts of the
stack.
For example, the following RUST_LOG env var enables "tracing" level
logging for `tvix_store` and `tvix_castore`, while keeping it at "info"
for the rest of the stack:
export RUST_LOG='info,tvix_store=trace,tvix_castore=trace'
It only affects logs, not traces (if enabled).
Change-Id: Ib936bd132a405f216e75c843db83fbd71d20a18a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11182
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Whenever this encounters an open_read(), it'll first check for more
granular chunking. If there's more granular chunking data available, a
ChunkedReader is constructed (which supports seeking backwards).
This currently is still a bit stupid, and doesn't compose, as
`ChunkedReader` uses `self` as the `BlobService` to ask for the
individual chunks.
In store composition future, we might want to compose this differently,
essentially constructing `ChunkedReader` with another `BlobService`
representing the entire hierarchy, so there's a chance to locally cache
things, and do less requests.
Change-Id: I22e0df4d6245f666d083b4f0b7114d3ac41d1dce
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11185
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This simply checks for the address to contain slashes, and if so, opens
a unix socket, rather than a tcp one. We'll use this in //tvix/boot
tests to simplify waiting for nar-bridge to be up.
Change-Id: I7184f548d57142b1c5f698a1f0c30343489373a5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11184
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Use the same format as Display, b3: followed by the base64
representation. This makes the debug implementation of everything
containing a b3 digest much nicer to read.
Change-Id: I3ca3154d0b6fb07781c8f9c83ece3ff1a6957902
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11181
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This bumps tonic and surrounding crates to 0.11.x.
We added support for tonic 0.11.x into tokio-listener
(https://github.com/vi/tokio-listener/pull/4), so that's bumped as well.
Change-Id: Icfade5894403228299836fefb21b2f9ae59dbebb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11156
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
`build.rs` emits rerun-if-changed statements for all proto files, as
well as all include paths we pass it.
Unfortunately, due to protobufs include path rules, we need to specify
the path to the depot root itself as an include path, at least when
building impurely with `cargo`. This causes cargo to essentially always
rebuild, as it also puts its own temporary files in there.
Unfortunately, tonic-build does not chase down to individual .proto
files that are included.
Disable emitting these `rerun-if-changed` statements for now.
This could cause cargo to not rebuild protos every time, causing stale
data until the next local `cargo clean`, but considering the protos
change not that frequently, and it'll immediately surface if trying to
build via Nix (either locally or in CI), it's a good-enough compromise.
Change-Id: Ifd279a2216222ef3fc0e70c5a2fe6f87997f562e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11157
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
When we added the Nix language test suite in cl/6126, we excluded the
whole tvix tests folder from Nix formatting. This is unintentional, as
we probably want *our* tests to be formatted correctly.
Change-Id: I2b66d79e30fae17e75d5a1f8c44e279886091c5f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11154
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This introduces a version reading sized byte packets. Both read_bytes,
accepting a range of allowed sizes, as well as read_bytes_unchecked,
which doesn't care, are added, including tests.
Co-Authored-By: picnoir <picnoir@alternativebit.fr>
Change-Id: I9fc1c61eb561105e649eecca832af28badfdaaa8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11150
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Tested-by: BuildkiteCI
These are not streams, but AsyncRead and AsyncWrite.
Change-Id: I7d988fa0490800b72862f4f0fcac3dceac70ec26
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11149
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This brings some initial Nix wire format parsing code, used in the nix
daemon protocol, remote store/builder protocol, as well as the NAR
format itself (note we already have more specialized code for the last
one).
Thanks to embr, this code already exists, in
https://codeberg.org/gorgon/gorgon/src/branch/main/nix-daemon/src/wire.rs,
and we can vendor it into here, as EUPL is compatible with GPL (in that
direction).
The code uses the tokio::io Reader and Writer traits, not the ones from
the `futures` crate, as they provide some more convenient `read_u64_le`
functions.
More application-specific parsing code, as well as code to read strings,
or bytes are left out for now, as we want to be be more restrictive
w.r.t allowed max sizes, and need to parse bytes, not strings.
The code slightly diverges, as we have clippy looped into CI.
`Ok(…?)` can be turned into just the inner expression, and
some .and_then can be expressed in a simpler fashion.
Change-Id: Ie3adcb485e9d66786673b1962a08d4e5df3781d9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11148
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
derivation_or_fod_hash constructs ATerm bytes and feeds them to sha256.
input_derivations being slightly modified is an implementation detail,
so move the BTreeMap construction inline, and have aterm_bytes in a
let binding (and feed it to the hash function directly while
constructing it).
This makes it a bit more understandable what's going on.
Change-Id: I2f5cfbd1c964fd39ac731ca39e76cfc168f4c7d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11147
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: John Ericson <git@johnericson.me>
This is only used inside this function, in 2 of the match cases.
Change-Id: Ib361f5ee0e3b203802f7d05b9a7f332d14bbcf80
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11143
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: John Ericson <git@johnericson.me>
Tested-by: BuildkiteCI
The outer fingerprint used for store path calculation is always a sha256
digest. This includes both input and output-addressed store paths.
We used a NixHash here, which can also represent other hash types, and
that had a bunch of annoyances:
- Whenever we had the bytes, we had to wrap them in a NixHash::Sha256().
- Things like AtermWriteable had to be implemented on NixHash,
even though we then had an assertion it was only called in the
NixHash::Sha256 case.
Change-Id: Ic895503d9b071800d2e52ae057666f44bd0ab9d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11142
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: John Ericson <git@johnericson.me>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
