This is especially nice, as it allows us getting rid of the other
versions of proc-macro2 and quote.
Change-Id: I9fdd012ee6c0ded3e18ec30504b83ac2032d1390
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11474
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Also, rename the DUMMY_NAME constant in the fixtures to DUMMY_PATH,
which aligns more with the ToString representation and from_bytes
conversions we have on StorePath[Ref].
Change-Id: I39763c9dfa84c5d86f2fd0171b3a4d36fd72f267
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11464
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
There's no point in not enabling these, and rust-analyzer is quite
useless too.
nix-compat users outside of here can still explicitly disable default
features if they don't want to pull in these features.
Change-Id: I8f2f24e7734ad152d1733bc3421098fc91af290a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11455
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This makes use of the vmCmdline and assertVMOutput to boot a NixOS VM
off of `tvix-store virtiofs` have it write a message on successful
bootup, then have it shut down again.
We check we see the message in the output.
Seeding the store with the closure it's what's currently taking most
of the time (as it's all linear still), so log a message before booting
the VM.
Change-Id: I6887d935f589eb0ad6507033c01337e1ec500a0b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11191
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Userland likes to seek backwards, and until we have store composition
and can serve chunks from a local cache, we need to buffer the
individual chunks in memory.
Change-Id: I66978a0722d5f55ed4a9a49d116cecb64a01995d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11448
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This makes it easier to separate concurrent requests on the same inode.
Change-Id: I7637c1d889336beeb0d186182ce22fbf60fd16c3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11447
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
The docs state we must fill all of the buffer, except on EOF.
Change-Id: Id977ba99c0b15132422474ebbf82bb92b79d55ba
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11446
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
When (re)initializing a chunked reader, we were erroneously skipping the
first n bytes from all chunks, not just the first one.
Fix this, by passing in an enumerated list of chunks, and only calling
SeekFrom::Start() on the first chunk in the stream.
With this, I'm able to invoke b3sum on bin/bash successfully.
Change-Id: I52ea480569267e093b0ac9d6bcd5c2d1b4db25f7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11443
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Increase the discard_buf to 4096 (as I've seen this size).
Use the ready! macro to propagate pendings.
Make it more clear what exactly should be skipped in total, and what
during the current iteration.
Also write down that poll_read call already takes care of updating
self.pos, as I ran into that trap earlier (and added it here).
Change-Id: I2d22e1c8a835c0f3dd0c648917009b2bad4fd57c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11442
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
If the resulting offset equals to our current position, there's no need
to recreate a reader.
Change-Id: I855f0c79c514c16ca48a78e12978af2835fbbd6a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11441
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
State that this case applies if the blob is small enough to fit inside a
single chunk.
Change-Id: I0383514729e686799599b629cf1303b284147bb4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11440
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We previously returned Ok(None) when being asked for more granular
chunking info, signalling the blob does not exist at all.
This is however incorrect, we should return an empty Vec instead, as
documented in the trait.
Change-Id: I83ecc2027e0767134c7598792c2ee6d964853c66
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11439
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
It's perfectly normal if we ask for more granular chunking info and the
backend responds it does not have it.
Change-Id: I593ab3e53b4f4e70c99f39b266546d2ac8eb10c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11437
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We're receiving bytes over the wire, and encode them the same way
B3Digest does internally, but don't use it for formatting, as we're
discarding that string.
In case the sent bytes don't have the right length, the string will be
short, but it's better to still have it as a field, even if it's not a
valid b3 digest.
Change-Id: I6ef08275d51c8a0d98f5e46844b15dfd05d17cd8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11436
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
These were copying unnecessarily. Instead, have a
InodeData::from_node(), which *consumes* the Node entirely, returns
`InodeData` and the split-off name (which is not part of InodeData).
Callers can then use the result in various helper functions, like:
- InodeData::as_fuse_type
- InodeData::as_fuse_file_attr
- InodeData::as_fuse_entry
… to prepare their replies to the kernel.
This removes not only a bunch of clones, but also a lot of copy-pasted
code.
Change-Id: Idbca5f25cc29e96c1f4c614b33dff2becb0a8738
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11435
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Use a proper graph library to ensure all nodes are reachable from the
root.
We had a bit of that handrolled during add(), as well as later, which
had an annoying bug:
Redundant nodes were omitted during insert, but when returning the list
during finalize, we did not properly account they need to be introduced
before their parents are sent.
We now simply populate a petgraph DiGraph during insert (skipping
inserting nodes we already saw), and use petgraph's DfsPostOrder to
traverse the graph during finalize.
If the number of returned indices equals the total number of nodes in
the graph, all nodes are reachable from the root, we can consume the
graph and return the nodes as a vec, in the same order as the traversal
(and insertion).
Providing a regression test for the initial bug is challenging, as the
current code uses a bunch of HashSets. I manually tested ingesting a
full NixOS closure using this mechanism (via gRPC, which exposes this
problem, as it validates twice), and it now works.
Change-Id: Ic1d5e3e981f2993cc08c5c6b60ad895e578326dc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11418
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Have a Option<Box<dyn DirectoryPutter>>, which is lazily initialized
whenever we first want to upload a directory.
Have the loop explicitly break when it encounters the root_node, and
deal with the flushing after the loop.
Deal with the FUTUREWORK (assertion for root directory digest matching
what the DirectoryPutter returns).
Change-Id: Iefc4904d8b8387e868fb752d40e3e4e4218c7407
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11417
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Separate this a bit stronger from the main application flow.
Change-Id: I2e9bd3ec47cc6e37256ba6afc6e0586ddc9a051f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11416
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Align these names and comments with the two users, to make it more
obvious we're doing the same thing here, just use a different method to
come up with entries_per_depths.
Change-Id: I42058e397588b6b57a6299e87183bef27588b228
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11415
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This did very little, and especially the part of relying on the outside
caller to pass in a Directory if the type is a directory required having
per-entry-type specific logic anyways.
It's cleaner to just inline it.
Change-Id: I997a8513ee91c67b0a2443cb5cd9e8700f69211e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11414
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This makes it easier to understand the code.
Change-Id: I0a9047433000551a6ba1f50a8c5c93527bc86216
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11413
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We previously updated this.pos also in case the underlying read returned
an error.
Also, use the ready! macro to remove the match block, and instrument
errors returned during start_seek.
Change-Id: Ic32e26579d964a76b45687134acc48d72d67c36f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11421
Reviewed-by: Brian Olsen <me@griff.name>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
When a directory or file is open()'ed, we already put some data into
a lookup table, and subsequent operations then use the returned handle
id.
By also adding the span that's been created during these calls into the
lookup table, we can properly set the span parent for these requests,
nicely connecting the individual operations to the bigger picture.
Change-Id: Ia354842fccdbc7f45c2d3efda3acf058b2dbc48e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11429
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Brian Olsen <me@griff.name>
Instead of creating another child span, we can use
`tracing::Span::current().record(k,v)` to add an additional field to the
current span.
Change-Id: I337faac0e73a0da6eb0a52cb75c2e8c026eff774
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11428
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This currently shares some code with readdir, except it's also providing
a second `fuse_backend_rs::api::filesystem::Entry` argument to the
`add_entry` function call.
Refactoring this to reduce some duplication is left for a future CL.
Change-Id: I282c8dfc6a711d00a4482c87cbb84d4950c0aee9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11426
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Use rq.handle in `release` too, and remove interpolating it into the
log message itself.
Also update the comment, we don't get ownership, just simply drop, and
change the level to warn!, as suggested in cl/11425.
Change-Id: If4e6cff6d8b580671b1548ae3862851db4af6694
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11427
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Similar to how we already handle opening files, implement opendir/
releasedir, and keep a map of dir_handles. They point to the rx side of
a channel.
This greatly improves performance listing the root of the filesystem
when used inside tvix-store, as we don't need to re-request the listing
(and skip to the desired position) all the time.
Change-Id: I0d3ec4cb70a8792c5a1343439cf47d78d9cbb1d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11425
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This allows us acquiring the lock in sync code still. Also, simplify
some of the error handling a bit.
Change-Id: I29e83b715f92808e95ecb0ae9de787339d1a371d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11424
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
We can just pass an async move closure to `self.tokio_handle.block_on`
and make this a bit shorter.
Change-Id: Iba674f34f22ba7a7de7c5bae59d64584884cb17c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11423
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This exposes `user.tvix.castore.{blob,directory}.digest` xattr keys for
files and directories:
```
❯ getfattr -d /tmp/tvix/06jrrv6wwp0nc1m7fr5bgdw012rfzfx2-nano-7.2-info
getfattr: Removing leading '/' from absolute path names
user.tvix.castore.directory.digest="b3:SuYDcUM9RpWcnA40tYB1BtYpR0xw72v3ymhKDQbBfe4="
❯ getfattr -d /tmp/tvix/156a89x10c3kaby9rgf3fi4k0p6r9wl1-etc-shells
getfattr: Removing leading '/' from absolute path names
user.tvix.castore.blob.digest="b3:pZkwZoHN+/VQ8wkaX0wYVXZ0tV/HhtKlSqiaWDK7uRs="
```
It's currently mostly used for debugging, though it might be useful for
tvix-castore-aware syncing programs using the filesystem too.
Change-Id: I26ac3cb9fe51ffbf7f880519f26741549cb5ab6a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11422
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
We don't need to copy if we explicitly say that the returned
Option<Path> may hold onto bytes from the passed in &DirEntry.
Change-Id: Ib46b6fd2f8f19a45f8bef79c4c1d2fa6b490cad7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11410
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
It was returning `{ line, col, file }` instead of `{ line, column, file
}`.
Note this is not a regression in Nix, Nix always had `column` since
2013.
Change-Id: I4871a201b32324dff0432526d0449806a535828f
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11409
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This tells josh to include the patch from
third_party/overlays/patches/cbtemulator-uds.patch at
nixpkgs/cbtemulator-uds.patch.
We then use the `additionalOverlays` feature introduced earlier, and
pass it an overlay adding the patch to `cbtemulator`.
This only gets applied if tvix/shell.nix is not called with a pkgs
argument, which is the case in the tvix view.
Change-Id: I7bc5543460ddd30325ab0998e891c15fcaf8bcfe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11408
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
While the compiler might realize it's a good idea to inline these,
especially considering this is in the same crate [1], it doesn't hurt to
add that annotation too.
Suggested in cl/11385.
[1]: https://nnethercote.github.io/perf-book/inlining.html
Change-Id: If679fce0e1aab9ec681ba60f689d386d6fd92d61
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11403
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
We should cap the time of a `cargo build && cargo test` to a reasonable
amount of time.
Change-Id: If618198459ac267f9f6d7eb60466534a95a95c2c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11404
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This is a stream of DirEntry, so let's call it direntry_stream.
Change-Id: I5b3cb4efba899d746393f75f6ece7eaa79424717
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11401
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Instead of using an additional Nix build producing a directory structure
containing xz-compressed NAR files and NARInfos, and uploading these via
`curl` to NAR-bridge, which then decomposes them and uploads them to
tvix-store, have tvix-store interpret the exported reference graph
directly, and deal with the uploading on its own.
Change-Id: I44ee0b132944c53d11abb688d2d017f0cc9c3d97
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11398
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This allows copying individual store paths from the local /nix/store
into tvix-store.
As we don't support getting this information from Nix yet, we currently
expect metadata to be provided externally:
Nix' `exportReferencesGraph` feature contains pretty much all data we
need for this. Expect a list of this information at a well-known key
(`closure`, similar to nixpkgs' `pkgs/build-support/binary-cache/
default.nix`).
We currently simply upload all store paths sequentially, without any
parallelism or awareness in how the reference graph looks like.
As long as the connected stores don't enforce this, this is fine, at
least for now.
Change-Id: Ib83c998465adddfdb110db994843c44e26b3d3d8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11397
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
`toJSON` transform a Nix structure into a JSON string.
For each context in that Nix structure, the JSON string must possess it.
Thus, it is necessary to take the union of all contexts and attach it to
the final structure.
Unfortunately, the return type of `into_json` is a serde's JSON object,
not a string. Therefore, it is not possible to reuse `NixString`
machinery.
Context tests are reinforced as Nix does not test those behaviors.
Fixes b/393.
Change-Id: I5afdbc4e18dd70469192c1aa657d1049ba330149
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11266
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
There's little reason to keep the nar writer using Async{Read,Write}
traits from futures, while everything else async in tvix (and
nix-compat) uses tokio.
Change-Id: I8cd1efcd0dd5bb76471de997603c7b701a5095de
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11391
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: Brian Olsen <me@griff.name>
This doesn't have much to do with the plain "wire" format, it's merely
one user of it.
Also, use the more "public" `wire::` API to read/write bytes, strings,
bools and u64s.
Change-Id: I98dddcc3004dfde7a0c009958fe84a840f77b188
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11390
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: Brian Olsen <me@griff.name>
Move everything bytes-related into its own module, and re-export
both bytes and primitive in a flat space from wire/mod.rs.
Expose this if a `wire` feature flag is set. We only have `async` stuff
in here.
Change-Id: Ia4ce4791f13a5759901cc9d6ce6bd6bbcca587c7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11389
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
We don't have it in all Cargo.toml files either.
Change-Id: Ifcb333a39603a7e402ab0068e0f0f1b5af769e13
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11388
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
Autosubmit: flokli <flokli@flokli.de>
This is another representation about information Nix has on a Store
Path. It's encountered in the exportReferencesGraph feature.
Change-Id: Ia0c08c369f4af9e50ebe3a5053bd98fadaa0003d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11396
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This actually does a bit of allocation. There's two Vecs, one for
references and one for signatures.
We can get rid of the Vec at nar_hash.
Change-Id: Ie025309b6678f83f5b961d49ff75dcfc7da145a1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11395
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
We use the (slightly more tolerant) from_str to deserialize, and
serialize out as SRI.
Change-Id: If76b0ed2d4e243904f02df34f6c90b976c0bab8c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11393
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Move the code implementing it from StorePath to StorePathRef, and have
the StorePath impls use that too.
Drop the debug_assert in every comparison - we have tests for this to
ensure it keeps working, and built up some confidence by piping a lot of
other store paths through it in the meantime.
Change-Id: I288bad3dfa597f68d63c4bcda7791f722b7a8ced
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11392
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Put behind the "cloud" backend, like in the `tvix-castore` crate.
Change-Id: Ib38d198baf11ab2a4b6dc405121676147c424611
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11362
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
We forgot to only write the part of the padding that has not been
written already.
Unfortunately it seems the tokio mocking thing does buffer small writes,
so the tests succeeds even with the bug :-/
Change-Id: I5a6cf04212d559728639427c57207094d507ec75
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11384
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: Brian Olsen <me@griff.name>
Autosubmit: flokli <flokli@flokli.de>
Right now `builtins.hashFile` always reads the entire file into memory
before hashing, which is not ideal for large files. This replaces
`read_to_string` with `open_file` which allows calculating the hash of
the file without buffering it entirely into memory. Other callers can
continue to buffer into memory if they choose, but they still use the
`open_file` VM request and then call `read_to_string` or `read_to_end`
on the `std::io::Reader`.
Fixes b/380
Change-Id: Ifa1c8324bcee8f751604b0b449feab875c632fda
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11236
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This adds a Directory service using
https://cloud.google.com/bigtable/docs/ as a K/V store.
Directory (closures) are put in individual keys.
We don't do any bucketed upload of directory closures (yet), as castore/
fs does query individually, does not request recursively (and buffers).
This will be addressed by store composition at some point.
Change-Id: I7fada45bf386a78b7ec93be38c5f03879a2a6e22
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11212
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
In case structured attrs is enabled, rather than adding a
space-separated list to the "outputs" environment variable, a "proper"
list is added to the JSON itself, at the "outputs" key.
Fixes b/395.
Reported-By: Alyssa Ross <hi@alyssa.is>
Change-Id: I2834ede9cfcf49d5e81e1056bf8f9bb9b65ddad8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11386
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Make it a bit more clear that this is the total padding length, not the
padding length we still need to write.
Change-Id: I9ff4aa16f256fda367b4b9295abf82ed01b1f989
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11383
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This is perfectly fine to track the position inside a reader too, so
rename it to reflect that.
Also make the docstring a bit less write-specific.
Change-Id: I831b0a8fe44a2477d4af96fefc692b9aabc378f1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11382
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We actually did construct other payload sizes than the test function was
intended to, because I'm too stupid to count. Fix that, and also update
a leftover _debug in a test name.
Change-Id: I1bff8551f2078afe82f789646b851f2fcff3e82c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11381
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Moving out the handshake route out of tvix-daemon to nix-compat.
We're bumping the protocol to version 37. It does not change anything
for us. Version 37 introduced a change in the build result
serialization. We do not implement that for now.
Tested tvix-daemon against Nix via the integration test to make sure
we did not break anything in the process.
Taking advantage of this refactor to remove the unused anyhow
dependency in tvix-daemon.
Change-Id: I8a2aad0b6dbb0aaa997446a612a365fd7d70336c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11379
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This allows using read_u64, write_u64, which is a bit easier to juggle
with.
Also, update names to align with the nix codebase, which makes it easier
to spot both the constant name as well as the value.
Leave the ASCII interpretation as a comment afterwards.
Change-Id: I0b9ab187acd22807e2785b0722aa4300dab37c51
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11378
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
`primitive.rs` implements reading and writing primitive (fixed-length)
types in the wire format, used in the the nix daemon protocol and NAR
format.
Move worker-protocol specific magic bytes to worker_protocol.rs (and
possibly further split there once needed)
Change-Id: If681c01e9460294619f1d000229b81f0ac745810
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11377
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This includes String, &str etc. An example testcase with &str is
provided.
Change-Id: I900186d6ceb52f52bd41ef4596524c1f5b52470b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11376
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Use the same EMPTY_BYTES trick from BytesWriter to write out the
padding, rather than allocating a Vec.
Change-Id: Ifb4ba1b45b7388adbc135fc8e46fd3d3cedd30aa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11375
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Only describe the format once (in `read_bytes`, and simplify the other
docstrings a bit.
Change-Id: Iff898f3c4173d506a357bc14bdffbf69c4c6e0e0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11374
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
This isn't used anywhere so far, and if someone really wants to, they
can simply make the range open-ended.
Change-Id: Iae9bcaa1f7ea032dd3ee76c8c142a38b6b72894d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11373
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Tested-by: BuildkiteCI
We were wrongly using `'de` as a lifetime for both `Deserializer` and
`StorePathRef`.
This prevented Deserializing into a struct containing `StorePathRef`.
See https://serde.rs/lifetimes.html#the-deserializede-lifetime, the last
part of the paragraph:
The 'de lifetime should not appear in the type to which the Deserialize
impl applies.
- // Do not do this. Sooner or later you will be sad.
- impl<'de> Deserialize<'de> for Q<'de> {
+ // Do this instead.
+ impl<'de: 'a, 'a> Deserialize<'de> for Q<'a> {
This fixes it, and adds a test, deserializing into a `Container` struct.
It also fixes the existing test cases, deserialize_ref was actually
deserialize_owned, and deserialize_owned didn't exist yet - but they
alone are not enough to provoke the lifetime issues.
Change-Id: Iaed2832998cae5f192eafe7fd5243e82ff6e051e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11372
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Add the primitives necessary to read the client settings from the Nix
daemon wire protocol.
Introducing the read_string primitive. This trivial primitive parses a
read_bytes call, check the bytes are valid utf-8 bytes and wraps the
result in a String.
Change-Id: Ie1253523a6bd4e31e7924e9898a0898109da2fa0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11358
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This (and more) should now be covered by the generic testsuite
(in crate::blobservice::tests).
Change-Id: Ib3afc4f19f7e37a561b7398d43663dc941971f5c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11365
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This deals with writing byte packets of larger sizes to an underlying
AsyncWrite.
Its constructor receives the expected size. It also deals with writing
padding if flush/shutdown is called after writing all the payload.
Change-Id: I8acbf992467f3862ffb8c7d669e8c0c8eced14c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11355
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Brian Olsen <me@griff.name>
Tested-by: BuildkiteCI
Have this return a StorePathRef<'_>, rather than a StorePath, and leave
it up to the caller to possibly convert it to a owned StorePath.
This avoids some allocations, if we only want to validate.
Change-Id: I5cf8e246fe02bd4e631f46a5cb86d3f77a728a0d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11361
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Let's make this usable for the entire crate.
Change-Id: I754408908a00296ee80dd52680f84b8a7cb22317
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11354
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
`appendContext s ctx` will just append a user-crafted context attrs to `s`.
The most important part of this builtin is to perform all the relevant invariant validations
to avoid letting the user craft invalid contexts which can never be built, e.g. invalid store paths,
inexistent derivations, etc.
This version is incomplete and full of TODOs, but passes all the Nix's
context strings tests, so we turn them on.
Change-Id: I625dc5e7c4f5b784f078b390f04b0ee5a8d65a7c
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11263
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Fixes b/392.
Output paths were created, depending on a plain store path but no
context string was attached to track that plain dependency.
Context string propagation tests are strengthened to prevent any
regression on this.
Change-Id: Ifd6671aeba6949324b0bb9f0f766b87db728d484
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11351
Reviewed-by: Alyssa Ross <hi@alyssa.is>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Actually these are all u64 LE encoded on the wire.
Change-Id: I5ca22c7639607ac47117cd946e036a444271885a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11348
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Using all the primitives recently implemented to nix-compat to reach
the point where the Nix client start to send us operation requests.
Using a small integration test script (or the VM test, but let's face
it, it's too slow to be useful), we manage to reach the point where
we're able to read a store operation:
2024-03-21T18:53:27.624876Z INFO tvix_daemon: Incoming connection addr=unix
2024-03-21T18:53:27.625312Z INFO worker:perform_init_handshake: tvix_daemon: Trust sent conn=Connection(unix) conn=Connection(unix)
2024-03-21T18:53:27.625406Z INFO worker: tvix_daemon: Client hanshake succeeded conn=Connection(unix)
2024-03-21T18:53:27.625488Z INFO worker: tvix_daemon: Operation received op=SetOptions conn=Connection(unix)
We had to take some shortcuts wrt. stderr/log management. The CPP Nix
codebase is a bit confusing in that area. I'll need to spend more time
reading this to fully understand what's happening there. For now,
sending the STDERR_LAST command to the client does the trick.
Change-Id: I9b0e20a52d885e64fe29188496aac5334de61edd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11233
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This is used by the nix client to determine whether or not the daemon
trust it. The trust conditions check are daemon-specific, hence not
part of nix-compat.
Change-Id: Icbcba2f7f1fd58f67e7da72d22a264f5a3f3619d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11231
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Write counterpart of read_bytes. Despite its name, we mostly use it to
write strings (as in ascii strings) to the wire.
We also extract the padding calculation in its own function.
Change-Id: I8d936e989961107261b3089e4275acbd2c093a7f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11230
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Now, it supports almost everything except `recursive = false;`, i.e. `flat`-ingestion
because we have no knob exposed in the tvix store import side to do it.
This has been tested to work.
Change-Id: I2e9da10ceccdfbf45b43c532077ed45d6306aa98
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10597
Tested-by: BuildkiteCI
Autosubmit: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: flokli <flokli@flokli.de>
Instead of enforcing NAR SHA256 all the time, we generalize the
`PathInfo` constructor to take a `CAHash` argument which can drive
whether we are having a flat, NAR or text scheme.
With this, it is now possible to implement flat schemes in our
evaluation builtins, e.g. `builtins.path`.
Change-Id: I15bfee0ef4f0f428bfbd2f30c57c012cdcf6a976
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11286
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Bump to the latest u-root release. This seems to be compatible with go
1.22, too, which previously segfaulted the compiler in cl/11289.
Change-Id: Ie8a0d3cb51a435d6a0b194b38a9c83ee260618df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11291
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This builtin only transforms any `NixContextElement::Derivation` into the trivial `NixContextElement::Plain`.
This is a forgetful functor on derivation-deep context strings.
The test coverage of this change is done in cl/11264.
Change-Id: Icd00778c97766be6db8a6bdabaa59e9724353ec5
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11262
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Derivation that depends on `${d.drvPath}` generates a `NixContextElement::Derivation(drvPath)` context string.
In turn, this makes the dependent derivation depend on *ALL* outputs of that derivation.
Note that a dependency on `${d.drvPath}` generates an input source
dependency too.
This is a complete implementation of the context string system in Nix on
the "input population" side.
The test coverage of this change is taken care in cl/11264.
Change-Id: I97fe5f7c772a6b1cc4366bee071aa691a11fcde6
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11261
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Nixpkgs make use of it and this is a 2.3 builtin that was missed.
Change-Id: If36d748eed4a5f777344556c0802392c76c8d53c
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11260
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Make this function async, and do the block_on on the (single) callsite.
Change-Id: Ib8b0b54ab5370fe02ef95f38a45d8866868a9d60
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11285
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Replace the (single) callsite with some code interacting with the tokio
runtime to block on the async version.
Change-Id: I3976496ae77b2bb8734603f303655834265e3f0a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11284
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Let's get rid of these sync helpers, they make this less understandable.
Change-Id: I3c7294647849db2747762722247c65e4e2947757
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11283
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
We need to define behaviours and add tests for these.
Change-Id: Id5825fafbf47897d8de42503ea6006eb131b1082
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11281
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This drops pretty much all of castore/utils.rs.
There were only two things left in there, both a bit messy and only used
for tests:
Some `gen_*_service()` helper functions. These can be expressed by
`from_addr("memory://")`.
The other thing was some plumbing code to test the gRPC layer, by
exposing a in-memory implementation via gRPC, and then connecting to
that channel via a gRPC client again.
Previous CLs moved the connection setup code to
{directory,blob}service::tests::utils, close to where we exercise them,
the new rstest-based tests.
The tests interacting directly on the gRPC types are removed, all
scenarios that were in there show now be covered through the rstest ones
on the trait level.
Change-Id: I450ccccf983b4c62145a25d81c36a40846664814
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11223
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
As for grpc_pathinfoservice, we test this in the rstest-based tests,
with more implementations.
tests/utils.rs is unused now.
Change-Id: I62b192170d181e4fb432bf7dfff2057cb048b52c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11279
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Remove usage of the gen_{blob,directory}_service() helper functions
from utils. We populate Memory{Blob,Directory}Services here directly, as
test_case and rstest doesn't compose well.
Change-Id: I0fb48aadb8c818f508b18ceb83c85eb91359442a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11278
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Previous CLs ensured BlobService and DirectoryService is implemented on
AsRef<dyn BlobService> and AsRef<dyn DirectoryService> respectively, so
there's no need to require AsRef in here.
Change-Id: I1e8b93188ca784e1b9a592f3d35fcf6b9df75c75
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11275
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This stops using the gen_{blob,directory}_service() functions from
tvix_castore::utils in favor of the rstest-based fixtures.
Change-Id: I4c2fff2926f34af63d3bd5c29c8e939dbdf7e062
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11274
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This introduces rstest-based tests. We also add fixtures for creating
some BlobService / DirectoryService out of thin air.
To test a PathInfoService, we don't really care too much about its
internal storage - ensuring they work is up to the castore tests.
Change-Id: Ia62af076ef9c9fbfcf8b020a781454ad299d972e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11272
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This makes the fixture more use-able when interacting with the trait,
the Bytes are only useful for the gRPC version.
Change-Id: Iaaea1adc6df18491f236a28c4343f5b4ee5fcfd3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11271
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This allows StorePathRef as keys in a hashmap, by deriving Hash. The same is already done for StorePath.
Change-Id: I3fc54c45787948116dcb27dfb5dc806b9b505835
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11269
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This allows us to use containers around BlobServices as BlobServices too.
Change-Id: I3c7feb074f42b4e07c550fb8dfa63cf81d448ab5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11249
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This creates test scenarios (using the DirectoryService trait) that we
want all DirectoryService implementations to pass.
Some of these tests are ported from proto::tests::grpc_directoryservice,
which tested this on the gRPC interface (rather than the trait),
some others ensure certain behaviour for which we only recently
introduced general checking logic (through ClosureValidator).
We also borrow some code related to setting up a gRPC DirectoryService
client (connecting to a server exposing a in-memory DiretoryService)
from castore::utils, this will be deleted once it's all ported over.
Change-Id: I6810215a76101f908e2aaecafa803c70d85bc552
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11247
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This allows us to use containers around DirectoryServices as DirectoryServices too.
Change-Id: I56cca27b3212858db8b12b874df0e567dd868711
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11248
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This uses DirectoryClosureValidator for validation and the sled batch
API to insert multiple directories at once.
Change-Id: I2d6dc513ccbc02e638f8d22173da5463e73182ee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11222
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This greatly simplifies the code in this function, replacing it with a
much better tested (and more capable!) version of the validation logic.
It also enables the gRPC server frontend to make use of the
DirectoryPutter interface. While this might not be too visible in terms
of latency thanks to gRPC streams bursting, it also enables further
optimizations later (such as bucketing of directory closures).
Change-Id: I21f805aa72377dd5266de3b525905d9f445337d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11221
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This simplifies a bunch of code, and gets rid of some TODOs.
Also, move it out of castore/utils, and into its own file.
Change-Id: Ie63e05a6cdfb2a73e878cf7107f9172aed1cdf13
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11224
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
This can be used to validate a Directory closure (connected DAG of
Directories), and their insertion order.
Directories need to be inserted (via `add`), in an order from the leaves
to the root. During insertion, we validate as much as we can at that
time:
- individual validation of Directory messages
- validation of insertion order (no upload of not-yet-known Directories)
- validation of size fields of referred Directories
Internally it keeps all received Directories (and their sizes) in a HashMap,
keyed by digest.
Once all Directories have been inserted, a drain() function can be
called to get a (deduplicated and) validated list of directories, in
from-leaves-to-root order (to be stored somewhere).
While assembling that list, a check for graph connectivity is performed
too, to ensure there's no separate components being sent (and only one
root).
It adds a test suite for these cases, which is much nicer to test than
where we previously had these checks (only in the gRPC server wrapper).
Followup CLs will move the existing putters to use this.
Change-Id: Ie88c832924c170a24626e9e3e91d868497b5d7a4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11220
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
We need to ensure the Directories are successfully uploaded before doing
any testing with them.
Change-Id: Iafa8deb86b3d5eb302ebfba3ced34385f67a7229
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11244
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We tried to be more strict than Nix, actually detecting if multiple
hashes were specified, or other garbage at the end.
However, Nix seems to just chop off at the end, so happily accepts
anything afterwards.
Example: https://github.com/NixOS/nixpkgs/pull/298041
Example: https://github.com/NixOS/nixpkgs/pull/298052
Change-Id: I2c1a49f51c8f8589a84df2fbf148e67e7380b550
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11234
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This allows these messages to be put in HashSets.
Change-Id: Ia58094cafe53eb624578821d3d8d969c5d21a1d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11219
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Log the entire span with "trace" level, not just its `ret` level.
The level of the error value event defaults to ERROR, so we don't loose
these.
B3Digest implements Debug and Display the same way, so we can omit the
`(Display)` part in `ret(Display)` for them.
Change-Id: Id00d123a5798e5bdc9820dd97ae2b4d4eb5455f0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11218
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This is no public API to construct this, there's exactly one caller,
and it's perfectly fine to directly populate the struct there.
Change-Id: Idae43a0162ee9bc687d21c550e0c9df33f12d263
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11217
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This makes it easier to see what's going wrong when uploading multiple
Directories.
Change-Id: Ieb71424b9761777c5f719b2f365962644de82baf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11209
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
We had max_level_debug, not max_level_trace, so it was not possible to
have `RUST_LOG` emit trace-level values (at least for our crates).
release_max_level_info still controls the level for release builds, so
that's not affected.
Change-Id: I1f127ab63f13b1622d6616e06759a9414d9bb201
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11208
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
This functionality is provided by the object store backend too
(using `objectstore+file://$some_path`).
This backend also supports content-defined chunking and compresses
chunks with zstd.
Change-Id: I5968c713112c400d23897c59db06b6c713c9d8cb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11205
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
