In case a NIC supports multiple frequency bands, the supported
hw-modelist might not contain all valid hwmodes, as B/G/AD hwmodes are
only included based on the last parsed supported frequency.
In case a radio supports multiple bands, this might result in these
hwmodes not being flagged as supported.
Circumvent this by tracking all seen frequency bands using a bitmask
which later determined which HW modes are listed as supported.
Signed-off-by: David Bauer <mail@david-bauer.net>
The previous shell script implementation accepted shorter path values
that omitted initial parts before the pcie bus node by only checking if
the configured path is included in the determined path
Add support for doing the same thing here
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This adds 802.11ax HE specific rate information to iwinfo.
Add fields for HE status of a STA as well as DCM and guard interval
fields specific to HE operation.
Signed-off-by: David Bauer <mail@david-bauer.net>
Perform a split wiphy dump when acquiring the hw modelist of a mac80211
device. Otherwise HE capabilities are missing from the message.
This is necessary since upstream commit f8d504caa ("nl80211: reduce
non-split wiphy dump size") (Kernel 5.9).
Signed-off-by: David Bauer <mail@david-bauer.net>
This adds basic support for IEEE 802.11ax when requesting HW or HT
Modelist for a PHY from iwinfo. This way, applications using iwinfo can
detect HE phys.
Signed-off-by: David Bauer <mail@david-bauer.net>
Add description strings and detection logic for all 6
types of WiFi NICs integrated in QCA MIPS WiSoCs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Extend support for WPA ciphers by GCMP which is required for 802.11ad.
Breaks ABI as ciphers now needs to be a field of 16 bits instead of 8.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Iwinfo already export the htmode but there is no way to know where the
channel expan in case a 40Mhz+ channel width is used. Export the center
channels used by the driver to better know the channel utilizzation of
the wifi.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Export ht and vht operation data in scan results. These additional data
can be usefull to check wifi channel utilizzation by neraby stations.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
As it's the most reliable and straight forward way on modern platforms,
detect the hardware ID by checking the 'compatible'-string of non-PCI
(ie. built-in) devices.
As this is only relevant for WiSoCs, there won't be that many records,
so it's not worth making any larger structural changes. Hence just
match the compatible string and translate it into fake PCI IDs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This reverts commit a6914dc0dc.
iwinfo currently misses ABI version tracking in OpenWrt, potentially
breaking other packages unintentionally.
Revert this commit for now until this is implemented.
Otherwise, we are not able to safely bump iwinfo at the moment.
Signed-off-by: David Bauer <mail@david-bauer.net>
This adds support for the BSS load information element. With this patch,
the BSS load information is visible when using the CLI as well as when
accessing scan results using the LUA binding.
Signed-off-by: David Bauer <mail@david-bauer.net>
This fixes VAPs not being queried correctly when the netdev name starts
with "radio".
Fixes: FS#2629
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: David Bauer <mail@david-bauer.net>
The mac80211.sh implementation of the uci "path" option compares the
readlink() results of each /sys/class/ieee80211/*/device link to find
the proper phy directory while iwinfo so far tried to construct a full
path out of the uci value.
The iwinfo approach appears to fail under certain circumstances, e.g.
with Hyper-V systems utilizing PCI passthrough for the radio devices.
This commit mimicks the behaviour of mac80211.sh more closely to
achieve the same results.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
When wpa_supplicant responds with FAIL-BUSY in response to the SCAN
command, a scan process is already in process. Instead of failing in
this case, simply keep awaiting the result list.
This also significantly speeds up the scan operation in many cases.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Refactor the parsing of wpa_supplicant scan list results, the wpa_supplicant
status output and the hostapd configuration file format to properly detect
WPA3 key management protocols like SAE, OWE or EAP Suite B.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
With WPA3 the wpa_key_mgmt string can be longer than 16 bytes. The
sea-mixed setting for example is 27 bytes long:
wpa_key_mgmt=WPA-PSK WPA-PSK-SHA256 SAE
Increase the buffer to better detect more complicated authentication methods.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This patch adds support for WPA3, meaning SAE and OWE are now properly identified.
This fixes iwinfo and LuCi showing WPA2 NONE for WPA3 SAE and OWE.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Do not require a temporary interface just to read the hardware ID numbers
from a given phy name, instead read the data from the ieee80211 sysfs
directory.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This patch enables proper identification of ad hwmode in channel2frequency function.
Now iwinfo will properly calculate frequency for a channels 1-6 in 802.11ad.
Fixes a8e8275923
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch adds support for identifying, calculating channels from
frequency and vice versa as well as Lua hwmode for 802.11ad.
Support has been added for channels 1-6.
Signed-off-by: Robert Marko <robimarko@gmail.com>
[Increase buffer size for hwmodes]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The wpa_supplicant control socket might reply with "FAIL-BUSY" when
attempting to start a scan while another scanning process is already
running, back out early in this case.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Using average of previous average and the next value is highly
imprecise. E.g. for values 20, 20, 20, 180 it would result in /average/
of 100 (instead of 60). Fix it by storing & using an info of how many
samples were used for the previous calculation.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
cfg80211 allows drivers to announce the to-be-expected layer-2 datarate
using the NL80211_STA_INFO_EXPECTED_THROUGHPUT field.
This information is useful as a metric for user-space routing daemons,
so grab it via nl80211 and make it available in both C and Lua APIs,
and show expected throughput on CLI interface assoclist.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Drivers may abort a scan by calling cfg80211_scan_done() with a struct
cfg80211_scan_info that sets aborted to true.
To avoid blocking forever consider both NL80211_CMD_NEW_SCAN_RESULTS
and NL80211_CMD_SCAN_ABORTED when waiting for scan results.
Tested with Broadcom's bcmdhd driver.
Signed-off-by: Olof Sivertsson <olof.sivertsson@zenterio.com>
[rebased on top of variadic nl80211_wait()]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Extend the nl82011_wait() function to accept multiple command numbers.
This is useful to wait for different possible results, e.g. either
NL80211_CMD_NEW_SCAN_RESULTS or NL80211_CMD_SCAN_ABORTED.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
In order to get more details about each frequency we will need to set
NL80211_ATTR_SPLIT_WIPHY_DUMP in the future. This will result in our
callback being called multiple times. Modify it to support such a
scenario:
1) Start putting new frequencies after the last set one
2) Make sure that attribute is set before iterating it
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Jo-Philipp Wich <jo@mein.io>
- introduce a new nl80211_request() which combines nl80211_msg() with
nl80211_send() to simplify calling code
- always invoke nl80211_free() in nl80211_send() and remove explicit
nl80211_free() invocations in callers
- back out early on netlink errors in functions performing multiple
calls, e.g. when fetching scan results
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Adjust nl80211_send() to propagate errors back to the caller and do not
free message and callbacks in send error case anymore since all callsites
immediately invoke nl80211_free() anyway.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
