DGNum/hostapd
6
0
Fork 0
Code Issues Pull requests 1 Projects Releases Packages Wiki Activity Actions
hostapd/tests/hwsim/test_ap_open.py
Adiel Aloni 946ed13c98 tests: Enable device PS before sending PS-Poll 
Linux kernel commit c9491367b759 ("mac80211: always update the PM state
of a peer on MGMT / DATA frames") enforces the AP to check only
mgmt/data frames PM bit, and to update station's power save accordingly.
When sending only a PS-Poll (control frame) the AP will ignore the PM
bit. As the result, the partial virtual bitmap will not be updated, and
the test ap_open_disconnect_in_ps will fail on tshark check. Since the
test needs only the TIM to be updated, setting PS enabled will send NDP
that will signal that the station is sleeping. Sending PS-Poll to enable
power save is not correct, according to the following standard
statement: "A PS-Poll frame exchange does not necessarily result in an
Ack frame from the AP, so a non-AP STA cannot change power management
mode using a PS-Poll frame."

Signed-off-by: Adiel Aloni <adiel.aloni@intel.com>
2018-02-04 12:06:11 +02:00

810 lines
33 KiB
Python
Raw Blame History

# Open mode AP tests
# Copyright (c) 2014, Qualcomm Atheros, Inc.
#
# This software may be distributed under the terms of the BSD license.
# See README for more details.
from remotehost import remote_compatible
import logging
logger = logging.getLogger()
import struct
import subprocess
import time
import os
import hostapd
import hwsim_utils
from tshark import run_tshark
from utils import alloc_fail, fail_test, wait_fail_trigger
from wpasupplicant import WpaSupplicant
from test_ap_ht import set_world_reg
@remote_compatible
def test_ap_open(dev, apdev):
"""AP with open mode (no security) configuration"""
_test_ap_open(dev, apdev)
def _test_ap_open(dev, apdev):
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
bg_scan_period="0")
ev = hapd.wait_event([ "AP-STA-CONNECTED" ], timeout=5)
if ev is None:
raise Exception("No connection event received from hostapd")
hwsim_utils.test_connectivity(dev[0], hapd)
dev[0].request("DISCONNECT")
ev = hapd.wait_event([ "AP-STA-DISCONNECTED" ], timeout=5)
if ev is None:
raise Exception("No disconnection event received from hostapd")
def test_ap_open_packet_loss(dev, apdev):
"""AP with open mode configuration and large packet loss"""
params = { "ssid": "open",
"ignore_probe_probability": "0.5",
"ignore_auth_probability": "0.5",
"ignore_assoc_probability": "0.5",
"ignore_reassoc_probability": "0.5" }
hapd = hostapd.add_ap(apdev[0], params)
for i in range(0, 3):
dev[i].connect("open", key_mgmt="NONE", scan_freq="2412",
wait_connect=False)
for i in range(0, 3):
dev[i].wait_connected(timeout=20)
@remote_compatible
def test_ap_open_unknown_action(dev, apdev):
"""AP with open mode configuration and unknown Action frame"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
bssid = apdev[0]['bssid']
cmd = "MGMT_TX {} {} freq=2412 action=765432".format(bssid, bssid)
if "FAIL" in dev[0].request(cmd):
raise Exception("Could not send test Action frame")
ev = dev[0].wait_event(["MGMT-TX-STATUS"], timeout=10)
if ev is None:
raise Exception("Timeout on MGMT-TX-STATUS")
if "result=SUCCESS" not in ev:
raise Exception("AP did not ack Action frame")
def test_ap_open_invalid_wmm_action(dev, apdev):
"""AP with open mode configuration and invalid WMM Action frame"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
bssid = apdev[0]['bssid']
cmd = "MGMT_TX {} {} freq=2412 action=1100".format(bssid, bssid)
if "FAIL" in dev[0].request(cmd):
raise Exception("Could not send test Action frame")
ev = dev[0].wait_event(["MGMT-TX-STATUS"], timeout=10)
if ev is None or "result=SUCCESS" not in ev:
raise Exception("AP did not ack Action frame")
@remote_compatible
def test_ap_open_reconnect_on_inactivity_disconnect(dev, apdev):
"""Reconnect to open mode AP after inactivity related disconnection"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
hapd.request("DEAUTHENTICATE " + dev[0].p2p_interface_addr() + " reason=4")
dev[0].wait_disconnected(timeout=5)
dev[0].wait_connected(timeout=2, error="Timeout on reconnection")
@remote_compatible
def test_ap_open_assoc_timeout(dev, apdev):
"""AP timing out association"""
ssid = "test"
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
dev[0].scan(freq="2412")
hapd.set("ext_mgmt_frame_handling", "1")
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
wait_connect=False)
for i in range(0, 10):
req = hapd.mgmt_rx()
if req is None:
raise Exception("MGMT RX wait timed out")
if req['subtype'] == 11:
break
req = None
if not req:
raise Exception("Authentication frame not received")
resp = {}
resp['fc'] = req['fc']
resp['da'] = req['sa']
resp['sa'] = req['da']
resp['bssid'] = req['bssid']
resp['payload'] = struct.pack('<HHH', 0, 2, 0)
hapd.mgmt_tx(resp)
assoc = 0
for i in range(0, 10):
req = hapd.mgmt_rx()
if req is None:
raise Exception("MGMT RX wait timed out")
if req['subtype'] == 0:
assoc += 1
if assoc == 3:
break
if assoc != 3:
raise Exception("Association Request frames not received: assoc=%d" % assoc)
hapd.set("ext_mgmt_frame_handling", "0")
dev[0].wait_connected(timeout=15)
@remote_compatible
def test_ap_open_id_str(dev, apdev):
"""AP with open mode and id_str"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412", id_str="foo",
wait_connect=False)
ev = dev[0].wait_connected(timeout=10)
if "id_str=foo" not in ev:
raise Exception("CTRL-EVENT-CONNECT did not have matching id_str: " + ev)
if dev[0].get_status_field("id_str") != "foo":
raise Exception("id_str mismatch")
@remote_compatible
def test_ap_open_select_any(dev, apdev):
"""AP with open mode and select any network"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
id = dev[0].connect("unknown", key_mgmt="NONE", scan_freq="2412",
only_add_network=True)
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
only_add_network=True)
dev[0].select_network(id)
ev = dev[0].wait_event(["CTRL-EVENT-NETWORK-NOT-FOUND",
"CTRL-EVENT-CONNECTED"], timeout=10)
if ev is None:
raise Exception("No result reported")
if "CTRL-EVENT-CONNECTED" in ev:
raise Exception("Unexpected connection")
dev[0].select_network("any")
dev[0].wait_connected(timeout=10)
@remote_compatible
def test_ap_open_unexpected_assoc_event(dev, apdev):
"""AP with open mode and unexpected association event"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected(timeout=15)
dev[0].dump_monitor()
# This will be accepted due to matching network
dev[0].cmd_execute(['iw', 'dev', dev[0].ifname, 'connect', 'open', "2412",
apdev[0]['bssid']])
dev[0].wait_connected(timeout=15)
dev[0].dump_monitor()
dev[0].request("REMOVE_NETWORK all")
dev[0].wait_disconnected(timeout=5)
dev[0].dump_monitor()
# This will result in disconnection due to no matching network
dev[0].cmd_execute(['iw', 'dev', dev[0].ifname, 'connect', 'open', "2412",
apdev[0]['bssid']])
dev[0].wait_disconnected(timeout=15)
def test_ap_open_external_assoc(dev, apdev):
"""AP with open mode and external association"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open-ext-assoc" })
try:
dev[0].request("STA_AUTOCONNECT 0")
id = dev[0].connect("open-ext-assoc", key_mgmt="NONE", scan_freq="2412",
only_add_network=True)
dev[0].request("ENABLE_NETWORK %s no-connect" % id)
dev[0].dump_monitor()
# This will be accepted due to matching network
dev[0].cmd_execute(['iw', 'dev', dev[0].ifname, 'connect',
'open-ext-assoc', "2412", apdev[0]['bssid']])
ev = dev[0].wait_event([ "CTRL-EVENT-DISCONNECTED",
"CTRL-EVENT-CONNECTED" ], timeout=10)
if ev is None:
raise Exception("Connection timed out")
if "CTRL-EVENT-DISCONNECTED" in ev:
raise Exception("Unexpected disconnection event")
dev[0].dump_monitor()
dev[0].request("DISCONNECT")
dev[0].wait_disconnected(timeout=5)
finally:
dev[0].request("STA_AUTOCONNECT 1")
@remote_compatible
def test_ap_bss_load(dev, apdev):
"""AP with open mode (no security) configuration"""
hapd = hostapd.add_ap(apdev[0],
{ "ssid": "open",
"bss_load_update_period": "10",
"chan_util_avg_period": "20" })
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
# this does not really get much useful output with mac80211_hwsim currently,
# but run through the channel survey update couple of times
for i in range(0, 10):
hwsim_utils.test_connectivity(dev[0], hapd)
hwsim_utils.test_connectivity(dev[0], hapd)
hwsim_utils.test_connectivity(dev[0], hapd)
time.sleep(0.15)
avg = hapd.get_status_field("chan_util_avg")
if avg is None:
raise Exception("No STATUS chan_util_avg seen")
def test_ap_bss_load_fail(dev, apdev):
"""BSS Load update failing to get survey data"""
hapd = hostapd.add_ap(apdev[0],
{ "ssid": "open",
"bss_load_update_period": "1" })
with fail_test(hapd, 1, "wpa_driver_nl80211_get_survey"):
wait_fail_trigger(hapd, "GET_FAIL")
def hapd_out_of_mem(hapd, apdev, count, func):
with alloc_fail(hapd, count, func):
started = False
try:
hostapd.add_ap(apdev, { "ssid": "open" })
started = True
except:
pass
if started:
raise Exception("hostapd interface started even with memory allocation failure: %d:%s" % (count, func))
def test_ap_open_out_of_memory(dev, apdev):
"""hostapd failing to setup interface due to allocation failure"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
hapd_out_of_mem(hapd, apdev[1], 1, "hostapd_alloc_bss_data")
for i in range(1, 3):
hapd_out_of_mem(hapd, apdev[1], i, "hostapd_iface_alloc")
for i in range(1, 5):
hapd_out_of_mem(hapd, apdev[1], i, "hostapd_config_defaults;hostapd_config_alloc")
hapd_out_of_mem(hapd, apdev[1], 1, "hostapd_config_alloc")
hapd_out_of_mem(hapd, apdev[1], 1, "hostapd_driver_init")
for i in range(1, 3):
hapd_out_of_mem(hapd, apdev[1], i, "=wpa_driver_nl80211_drv_init")
# eloop_register_read_sock() call from i802_init()
hapd_out_of_mem(hapd, apdev[1], 1, "eloop_sock_table_add_sock;?eloop_register_sock;?eloop_register_read_sock;=i802_init")
# verify that a new interface can still be added when memory allocation does
# not fail
hostapd.add_ap(apdev[1], { "ssid": "open" })
def test_bssid_black_white_list(dev, apdev):
"""BSSID black/white list"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
hapd2 = hostapd.add_ap(apdev[1], { "ssid": "open" })
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
bssid_whitelist=apdev[1]['bssid'])
dev[1].connect("open", key_mgmt="NONE", scan_freq="2412",
bssid_blacklist=apdev[1]['bssid'])
dev[2].connect("open", key_mgmt="NONE", scan_freq="2412",
bssid_whitelist="00:00:00:00:00:00/00:00:00:00:00:00",
bssid_blacklist=apdev[1]['bssid'])
if dev[0].get_status_field('bssid') != apdev[1]['bssid']:
raise Exception("dev[0] connected to unexpected AP")
if dev[1].get_status_field('bssid') != apdev[0]['bssid']:
raise Exception("dev[1] connected to unexpected AP")
if dev[2].get_status_field('bssid') != apdev[0]['bssid']:
raise Exception("dev[2] connected to unexpected AP")
dev[0].request("REMOVE_NETWORK all")
dev[1].request("REMOVE_NETWORK all")
dev[2].request("REMOVE_NETWORK all")
dev[2].connect("open", key_mgmt="NONE", scan_freq="2412",
bssid_whitelist="00:00:00:00:00:00", wait_connect=False)
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
bssid_whitelist="11:22:33:44:55:66/ff:00:00:00:00:00 " + apdev[1]['bssid'] + " aa:bb:cc:dd:ee:ff")
dev[1].connect("open", key_mgmt="NONE", scan_freq="2412",
bssid_blacklist="11:22:33:44:55:66/ff:00:00:00:00:00 " + apdev[1]['bssid'] + " aa:bb:cc:dd:ee:ff")
if dev[0].get_status_field('bssid') != apdev[1]['bssid']:
raise Exception("dev[0] connected to unexpected AP")
if dev[1].get_status_field('bssid') != apdev[0]['bssid']:
raise Exception("dev[1] connected to unexpected AP")
dev[0].request("REMOVE_NETWORK all")
dev[1].request("REMOVE_NETWORK all")
ev = dev[2].wait_event(["CTRL-EVENT-CONNECTED"], timeout=0.1)
if ev is not None:
raise Exception("Unexpected dev[2] connectin")
dev[2].request("REMOVE_NETWORK all")
def test_ap_open_wpas_in_bridge(dev, apdev):
"""Open mode AP and wpas interface in a bridge"""
br_ifname='sta-br0'
ifname='wlan5'
try:
_test_ap_open_wpas_in_bridge(dev, apdev)
finally:
subprocess.call(['ip', 'link', 'set', 'dev', br_ifname, 'down'])
subprocess.call(['brctl', 'delif', br_ifname, ifname])
subprocess.call(['brctl', 'delbr', br_ifname])
subprocess.call(['iw', ifname, 'set', '4addr', 'off'])
def _test_ap_open_wpas_in_bridge(dev, apdev):
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
br_ifname='sta-br0'
ifname='wlan5'
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
# First, try a failure case of adding an interface
try:
wpas.interface_add(ifname, br_ifname=br_ifname)
raise Exception("Interface addition succeeded unexpectedly")
except Exception, e:
if "Failed to add" in str(e):
logger.info("Ignore expected interface_add failure due to missing bridge interface: " + str(e))
else:
raise
# Next, add the bridge interface and add the interface again
subprocess.call(['brctl', 'addbr', br_ifname])
subprocess.call(['brctl', 'setfd', br_ifname, '0'])
subprocess.call(['ip', 'link', 'set', 'dev', br_ifname, 'up'])
subprocess.call(['iw', ifname, 'set', '4addr', 'on'])
subprocess.check_call(['brctl', 'addif', br_ifname, ifname])
wpas.interface_add(ifname, br_ifname=br_ifname)
wpas.connect("open", key_mgmt="NONE", scan_freq="2412")
@remote_compatible
def test_ap_open_start_disabled(dev, apdev):
"""AP with open mode and beaconing disabled"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open",
"start_disabled": "1" })
bssid = apdev[0]['bssid']
dev[0].flush_scan_cache()
dev[0].scan(freq=2412, only_new=True)
if dev[0].get_bss(bssid) is not None:
raise Exception("AP was seen beaconing")
if "OK" not in hapd.request("RELOAD"):
raise Exception("RELOAD failed")
dev[0].scan_for_bss(bssid, freq=2412)
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
@remote_compatible
def test_ap_open_start_disabled2(dev, apdev):
"""AP with open mode and beaconing disabled (2)"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open",
"start_disabled": "1" })
bssid = apdev[0]['bssid']
dev[0].flush_scan_cache()
dev[0].scan(freq=2412, only_new=True)
if dev[0].get_bss(bssid) is not None:
raise Exception("AP was seen beaconing")
if "OK" not in hapd.request("UPDATE_BEACON"):
raise Exception("UPDATE_BEACON failed")
dev[0].scan_for_bss(bssid, freq=2412)
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
if "OK" not in hapd.request("UPDATE_BEACON"):
raise Exception("UPDATE_BEACON failed")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
dev[0].request("RECONNECT")
dev[0].wait_connected()
@remote_compatible
def test_ap_open_ifdown(dev, apdev):
"""AP with open mode and external ifconfig down"""
params = { "ssid": "open",
"ap_max_inactivity": "1" }
hapd = hostapd.add_ap(apdev[0], params)
bssid = apdev[0]['bssid']
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
dev[1].connect("open", key_mgmt="NONE", scan_freq="2412")
hapd.cmd_execute(['ip', 'link', 'set', 'dev', apdev[0]['ifname'], 'down'])
ev = hapd.wait_event(["AP-STA-DISCONNECTED"], timeout=10)
if ev is None:
raise Exception("Timeout on AP-STA-DISCONNECTED (1)")
ev = hapd.wait_event(["AP-STA-DISCONNECTED"], timeout=5)
if ev is None:
raise Exception("Timeout on AP-STA-DISCONNECTED (2)")
ev = hapd.wait_event(["INTERFACE-DISABLED"], timeout=5)
if ev is None:
raise Exception("No INTERFACE-DISABLED event")
# The following wait tests beacon loss detection in mac80211 on dev0.
# dev1 is used to test stopping of AP side functionality on client polling.
dev[1].request("REMOVE_NETWORK all")
hapd.cmd_execute(['ip', 'link', 'set', 'dev', apdev[0]['ifname'], 'up'])
dev[0].wait_disconnected()
dev[1].wait_disconnected()
ev = hapd.wait_event(["INTERFACE-ENABLED"], timeout=10)
if ev is None:
raise Exception("No INTERFACE-ENABLED event")
dev[0].wait_connected()
hwsim_utils.test_connectivity(dev[0], hapd)
def test_ap_open_disconnect_in_ps(dev, apdev, params):
"""Disconnect with the client in PS to regression-test a kernel bug"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
bg_scan_period="0")
ev = hapd.wait_event([ "AP-STA-CONNECTED" ], timeout=5)
if ev is None:
raise Exception("No connection event received from hostapd")
time.sleep(0.2)
# enable power save mode
hwsim_utils.set_powersave(dev[0], hwsim_utils.PS_ENABLED)
time.sleep(0.1)
try:
# inject some traffic
sa = hapd.own_addr()
da = dev[0].own_addr()
hapd.request('DATA_TEST_CONFIG 1')
hapd.request('DATA_TEST_TX {} {} 0'.format(da, sa))
hapd.request('DATA_TEST_CONFIG 0')
# let the AP send couple of Beacon frames
time.sleep(0.3)
# disconnect - with traffic pending - shouldn't cause kernel warnings
dev[0].request("DISCONNECT")
finally:
hwsim_utils.set_powersave(dev[0], hwsim_utils.PS_DISABLED)
time.sleep(0.2)
out = run_tshark(os.path.join(params['logdir'], "hwsim0.pcapng"),
"wlan_mgt.tim.partial_virtual_bitmap",
["wlan_mgt.tim.partial_virtual_bitmap"])
if out is not None:
state = 0
for l in out.splitlines():
pvb = int(l, 16)
if pvb > 0 and state == 0:
state = 1
elif pvb == 0 and state == 1:
state = 2
if state != 2:
raise Exception("Didn't observe TIM bit getting set and unset (state=%d)" % state)
@remote_compatible
def test_ap_open_select_network(dev, apdev):
"""Open mode connection and SELECT_NETWORK to change network"""
hapd1 = hostapd.add_ap(apdev[0], { "ssid": "open" })
bssid1 = apdev[0]['bssid']
hapd2 = hostapd.add_ap(apdev[1], { "ssid": "open2" })
bssid2 = apdev[1]['bssid']
id1 = dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
only_add_network=True)
id2 = dev[0].connect("open2", key_mgmt="NONE", scan_freq="2412")
hwsim_utils.test_connectivity(dev[0], hapd2)
dev[0].select_network(id1)
dev[0].wait_connected()
res = dev[0].request("BLACKLIST")
if bssid1 in res or bssid2 in res:
raise Exception("Unexpected blacklist entry")
hwsim_utils.test_connectivity(dev[0], hapd1)
dev[0].select_network(id2)
dev[0].wait_connected()
hwsim_utils.test_connectivity(dev[0], hapd2)
res = dev[0].request("BLACKLIST")
if bssid1 in res or bssid2 in res:
raise Exception("Unexpected blacklist entry(2)")
@remote_compatible
def test_ap_open_disable_enable(dev, apdev):
"""AP with open mode getting disabled and re-enabled"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
bg_scan_period="0")
for i in range(2):
hapd.request("DISABLE")
dev[0].wait_disconnected()
hapd.request("ENABLE")
dev[0].wait_connected()
hwsim_utils.test_connectivity(dev[0], hapd)
def sta_enable_disable(dev, bssid):
dev.scan_for_bss(bssid, freq=2412)
work_id = dev.request("RADIO_WORK add block-work")
ev = dev.wait_event(["EXT-RADIO-WORK-START"])
if ev is None:
raise Exception("Timeout while waiting radio work to start")
id = dev.connect("open", key_mgmt="NONE", scan_freq="2412",
only_add_network=True)
dev.request("ENABLE_NETWORK %d" % id)
if "connect@" not in dev.request("RADIO_WORK show"):
raise Exception("connect radio work missing")
dev.request("DISABLE_NETWORK %d" % id)
dev.request("RADIO_WORK done " + work_id)
ok = False
for i in range(30):
if "connect@" not in dev.request("RADIO_WORK show"):
ok = True
break
time.sleep(0.1)
if not ok:
raise Exception("connect radio work not completed")
ev = dev.wait_event(["CTRL-EVENT-CONNECTED"], timeout=0.1)
if ev is not None:
raise Exception("Unexpected connection")
dev.request("DISCONNECT")
def test_ap_open_sta_enable_disable(dev, apdev):
"""AP with open mode and wpa_supplicant ENABLE/DISABLE_NETWORK"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
bssid = apdev[0]['bssid']
sta_enable_disable(dev[0], bssid)
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
sta_enable_disable(wpas, bssid)
@remote_compatible
def test_ap_open_select_twice(dev, apdev):
"""AP with open mode and select network twice"""
id = dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
only_add_network=True)
dev[0].select_network(id)
ev = dev[0].wait_event(["CTRL-EVENT-NETWORK-NOT-FOUND"], timeout=10)
if ev is None:
raise Exception("No result reported")
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
# Verify that the second SELECT_NETWORK starts a new scan immediately by
# waiting less than the default scan period.
dev[0].select_network(id)
dev[0].wait_connected(timeout=3)
@remote_compatible
def test_ap_open_reassoc_not_found(dev, apdev):
"""AP with open mode and REASSOCIATE not finding a match"""
id = dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
only_add_network=True)
dev[0].select_network(id)
ev = dev[0].wait_event(["CTRL-EVENT-NETWORK-NOT-FOUND"], timeout=10)
if ev is None:
raise Exception("No result reported")
dev[0].request("DISCONNECT")
time.sleep(0.1)
dev[0].dump_monitor()
dev[0].request("REASSOCIATE")
ev = dev[0].wait_event(["CTRL-EVENT-NETWORK-NOT-FOUND"], timeout=10)
if ev is None:
raise Exception("No result reported")
dev[0].request("DISCONNECT")
@remote_compatible
def test_ap_open_sta_statistics(dev, apdev):
"""AP with open mode and STA statistics"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
stats1 = hapd.get_sta(addr)
logger.info("stats1: " + str(stats1))
time.sleep(0.4)
stats2 = hapd.get_sta(addr)
logger.info("stats2: " + str(stats2))
hwsim_utils.test_connectivity(dev[0], hapd)
stats3 = hapd.get_sta(addr)
logger.info("stats3: " + str(stats3))
# Cannot require specific inactive_msec changes without getting rid of all
# unrelated traffic, so for now, just print out the results in the log for
# manual checks.
@remote_compatible
def test_ap_open_poll_sta(dev, apdev):
"""AP with open mode and STA poll"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
if "OK" not in hapd.request("POLL_STA " + addr):
raise Exception("POLL_STA failed")
ev = hapd.wait_event(["AP-STA-POLL-OK"], timeout=5)
if ev is None:
raise Exception("Poll response not seen")
if addr not in ev:
raise Exception("Unexpected poll response: " + ev)
def test_ap_open_pmf_default(dev, apdev):
"""AP with open mode (no security) configuration and pmf=2"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
dev[1].connect("open", key_mgmt="NONE", scan_freq="2412",
ieee80211w="2", wait_connect=False)
dev[2].connect("open", key_mgmt="NONE", scan_freq="2412",
ieee80211w="1")
try:
dev[0].request("SET pmf 2")
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
finally:
dev[0].request("SET pmf 0")
dev[2].request("DISCONNECT")
dev[2].wait_disconnected()
ev = dev[1].wait_event(["CTRL-EVENT-CONNECTED"], timeout=0.1)
if ev is not None:
raise Exception("Unexpected dev[1] connection")
dev[1].request("DISCONNECT")
def test_ap_open_drv_fail(dev, apdev):
"""AP with open mode and driver operations failing"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
with fail_test(dev[0], 1, "wpa_driver_nl80211_authenticate"):
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
wait_connect=False)
wait_fail_trigger(dev[0], "GET_FAIL")
dev[0].request("REMOVE_NETWORK all")
with fail_test(dev[0], 1, "wpa_driver_nl80211_associate"):
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
wait_connect=False)
wait_fail_trigger(dev[0], "GET_FAIL")
dev[0].request("REMOVE_NETWORK all")
def run_multicast_to_unicast(dev, apdev, convert):
params = { "ssid": "open" }
params["multicast_to_unicast"] = "1" if convert else "0"
hapd = hostapd.add_ap(apdev[0], params)
dev[0].scan_for_bss(hapd.own_addr(), freq=2412)
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
ev = hapd.wait_event([ "AP-STA-CONNECTED" ], timeout=5)
if ev is None:
raise Exception("No connection event received from hostapd")
hwsim_utils.test_connectivity(dev[0], hapd, multicast_to_unicast=convert)
dev[0].request("DISCONNECT")
ev = hapd.wait_event([ "AP-STA-DISCONNECTED" ], timeout=5)
if ev is None:
raise Exception("No disconnection event received from hostapd")
def test_ap_open_multicast_to_unicast(dev, apdev):
"""Multicast-to-unicast conversion enabled"""
run_multicast_to_unicast(dev, apdev, True)
def test_ap_open_multicast_to_unicast_disabled(dev, apdev):
"""Multicast-to-unicast conversion disabled"""
run_multicast_to_unicast(dev, apdev, False)
def test_ap_open_drop_duplicate(dev, apdev, params):
"""AP dropping duplicate management frames"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open",
"interworking": "1" })
hapd.set("ext_mgmt_frame_handling", "1")
bssid = hapd.own_addr().replace(':', '')
addr = "020304050607"
auth = "b0003a01" + bssid + addr + bssid + '1000000001000000'
if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=%s" % auth):
raise Exception("MGMT_RX_PROCESS failed")
auth = "b0083a01" + bssid + addr + bssid + '1000000001000000'
if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=%s" % auth):
raise Exception("MGMT_RX_PROCESS failed")
ies = "00046f70656e010802040b160c12182432043048606c2d1a3c101bffff0000000000000000000001000000000000000000007f0a04000a020140004000013b155151525354737475767778797a7b7c7d7e7f808182dd070050f202000100"
assoc_req = "00003a01" + bssid + addr + bssid + "2000" + "21040500" + ies
if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=%s" % assoc_req):
raise Exception("MGMT_RX_PROCESS failed")
assoc_req = "00083a01" + bssid + addr + bssid + "2000" + "21040500" + ies
if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=%s" % assoc_req):
raise Exception("MGMT_RX_PROCESS failed")
reassoc_req = "20083a01" + bssid + addr + bssid + "2000" + "21040500" + ies
if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=%s" % reassoc_req):
raise Exception("MGMT_RX_PROCESS failed")
if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=%s" % reassoc_req):
raise Exception("MGMT_RX_PROCESS failed")
action = "d0003a01" + bssid + addr + bssid + "1000" + "040a006c0200000600000102000101"
if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=%s" % action):
raise Exception("MGMT_RX_PROCESS failed")
action = "d0083a01" + bssid + addr + bssid + "1000" + "040a006c0200000600000102000101"
if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=%s" % action):
raise Exception("MGMT_RX_PROCESS failed")
out = run_tshark(os.path.join(params['logdir'], "hwsim0.pcapng"),
"wlan.fc.type == 0", ["wlan.fc.subtype"])
num_auth = 0
num_assoc = 0
num_reassoc = 0
num_action = 0
for subtype in out.splitlines():
val = int(subtype)
if val == 11:
num_auth += 1
elif val == 1:
num_assoc += 1
elif val == 3:
num_reassoc += 1
elif val == 13:
num_action += 1
if num_auth != 1:
raise Exception("Unexpected number of Authentication frames: %d" % num_auth)
if num_assoc != 1:
raise Exception("Unexpected number of association frames: %d" % num_assoc)
if num_reassoc != 1:
raise Exception("Unexpected number of reassociation frames: %d" % num_reassoc)
if num_action != 1:
raise Exception("Unexpected number of Action frames: %d" % num_action)
def test_ap_open_select_network_freq(dev, apdev):
"""AP with open mode and use for SELECT_NETWORK freq parameter"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
id = dev[0].connect("open", key_mgmt="NONE", only_add_network=True)
dev[0].select_network(id, freq=2412)
start = os.times()[4]
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-STARTED"], timeout=5)
if ev is None:
raise Exception("Scan not started")
ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=15)
if ev is None:
raise Exception("Scan not completed")
end = os.times()[4]
logger.info("Scan duration: {} seconds".format(end - start))
if end - start > 3:
raise Exception("Scan took unexpectedly long time")
dev[0].wait_connected()
def test_ap_open_noncountry(dev, apdev):
"""AP with open mode and noncountry entity as Country String"""
_test_ap_open_country(dev, apdev, "XX", "0x58")
def test_ap_open_country_table_e4(dev, apdev):
"""AP with open mode and Table E-4 Country String"""
_test_ap_open_country(dev, apdev, "DE", "0x04")
def test_ap_open_country_indoor(dev, apdev):
"""AP with open mode and indoor country code"""
_test_ap_open_country(dev, apdev, "DE", "0x49")
def test_ap_open_country_outdoor(dev, apdev):
"""AP with open mode and outdoor country code"""
_test_ap_open_country(dev, apdev, "DE", "0x4f")
def _test_ap_open_country(dev, apdev, country_code, country3):
try:
run_ap_open_country(dev, apdev, country_code, country3)
finally:
dev[0].request("DISCONNECT")
set_world_reg(apdev[0], apdev[1], dev[0])
dev[0].flush_scan_cache()
def run_ap_open_country(dev, apdev, country_code, country3):
hapd = hostapd.add_ap(apdev[0], { "ssid": "open",
"country_code": country_code,
"country3": country3,
"ieee80211d": "1" })
dev[0].scan_for_bss(hapd.own_addr(), freq=2412)
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
dev[0].request("DISCONNECT")
dev[0].wait_disconnected()
def test_ap_open_disable_select(dev, apdev):
"""DISABLE_NETWORK for connected AP followed by SELECT_NETWORK"""
hapd1 = hostapd.add_ap(apdev[0], { "ssid": "open" })
hapd2 = hostapd.add_ap(apdev[1], { "ssid": "open" })
id = dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
dev[0].request("DISABLE_NETWORK %d" % id)
dev[0].wait_disconnected()
res = dev[0].request("BLACKLIST")
if hapd1.own_addr() in res or hapd2.own_addr() in res:
raise Exception("Unexpected blacklist entry added")
dev[0].request("SELECT_NETWORK %d" % id)
dev[0].wait_connected()
def test_ap_open_reassoc_same(dev, apdev):
"""AP with open mode and STA reassociating back to same AP without auth exchange"""
hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
try:
dev[0].request("SET reassoc_same_bss_optim 1")
dev[0].request("REATTACH")
dev[0].wait_connected()
hwsim_utils.test_connectivity(dev[0], hapd)
finally:
dev[0].request("SET reassoc_same_bss_optim 0")
Reference in a new issue View git blame Copy permalink