/* * Driver interface definition * Copyright (c) 2003-2017, Jouni Malinen * * This software may be distributed under the terms of the BSD license. * See README for more details. * * This file defines a driver interface used by both %wpa_supplicant and * hostapd. The first part of the file defines data structures used in various * driver operations. This is followed by the struct wpa_driver_ops that each * driver wrapper will beed to define with callback functions for requesting * driver operations. After this, there are definitions for driver event * reporting with wpa_supplicant_event() and some convenience helper functions * that can be used to report events. */ #ifndef DRIVER_H #define DRIVER_H #define WPA_SUPPLICANT_DRIVER_VERSION 4 #include "common/defs.h" #include "common/ieee802_11_defs.h" #include "common/wpa_common.h" #ifdef CONFIG_MACSEC #include "pae/ieee802_1x_kay.h" #endif /* CONFIG_MACSEC */ #include "utils/list.h" #define HOSTAPD_CHAN_DISABLED 0x00000001 #define HOSTAPD_CHAN_NO_IR 0x00000002 #define HOSTAPD_CHAN_RADAR 0x00000008 #define HOSTAPD_CHAN_HT40PLUS 0x00000010 #define HOSTAPD_CHAN_HT40MINUS 0x00000020 #define HOSTAPD_CHAN_HT40 0x00000040 #define HOSTAPD_CHAN_SURVEY_LIST_INITIALIZED 0x00000080 #define HOSTAPD_CHAN_DFS_UNKNOWN 0x00000000 #define HOSTAPD_CHAN_DFS_USABLE 0x00000100 #define HOSTAPD_CHAN_DFS_UNAVAILABLE 0x00000200 #define HOSTAPD_CHAN_DFS_AVAILABLE 0x00000300 #define HOSTAPD_CHAN_DFS_MASK 0x00000300 #define HOSTAPD_CHAN_VHT_10_70 0x00000800 #define HOSTAPD_CHAN_VHT_30_50 0x00001000 #define HOSTAPD_CHAN_VHT_50_30 0x00002000 #define HOSTAPD_CHAN_VHT_70_10 0x00004000 #define HOSTAPD_CHAN_INDOOR_ONLY 0x00010000 #define HOSTAPD_CHAN_GO_CONCURRENT 0x00020000 #define HOSTAPD_CHAN_VHT_10_150 0x00100000 #define HOSTAPD_CHAN_VHT_30_130 0x00200000 #define HOSTAPD_CHAN_VHT_50_110 0x00400000 #define HOSTAPD_CHAN_VHT_70_90 0x00800000 #define HOSTAPD_CHAN_VHT_90_70 0x01000000 #define HOSTAPD_CHAN_VHT_110_50 0x02000000 #define HOSTAPD_CHAN_VHT_130_30 0x04000000 #define HOSTAPD_CHAN_VHT_150_10 0x08000000 /* Allowed bandwidth mask */ enum hostapd_chan_width_attr { HOSTAPD_CHAN_WIDTH_10 = BIT(0), HOSTAPD_CHAN_WIDTH_20 = BIT(1), HOSTAPD_CHAN_WIDTH_40P = BIT(2), HOSTAPD_CHAN_WIDTH_40M = BIT(3), HOSTAPD_CHAN_WIDTH_80 = BIT(4), HOSTAPD_CHAN_WIDTH_160 = BIT(5), }; /* Filter gratuitous ARP */ #define WPA_DATA_FRAME_FILTER_FLAG_ARP BIT(0) /* Filter unsolicited Neighbor Advertisement */ #define WPA_DATA_FRAME_FILTER_FLAG_NA BIT(1) /* Filter unicast IP packets encrypted using the GTK */ #define WPA_DATA_FRAME_FILTER_FLAG_GTK BIT(2) #define HOSTAPD_DFS_REGION_FCC 1 #define HOSTAPD_DFS_REGION_ETSI 2 #define HOSTAPD_DFS_REGION_JP 3 /** * enum reg_change_initiator - Regulatory change initiator */ enum reg_change_initiator { REGDOM_SET_BY_CORE, REGDOM_SET_BY_USER, REGDOM_SET_BY_DRIVER, REGDOM_SET_BY_COUNTRY_IE, REGDOM_BEACON_HINT, }; /** * enum reg_type - Regulatory change types */ enum reg_type { REGDOM_TYPE_UNKNOWN, REGDOM_TYPE_COUNTRY, REGDOM_TYPE_WORLD, REGDOM_TYPE_CUSTOM_WORLD, REGDOM_TYPE_INTERSECTION, }; /** * struct hostapd_wmm_rule - WMM regulatory rule * @min_cwmin: Lower bound of CW_min value * @min_cwmax: Lower bound of CW_max value * @min_aifs: Lower bound of AIFS value * @max_txop: Upper bound of TXOP, value in units of 32 usec */ struct hostapd_wmm_rule { int min_cwmin; int min_cwmax; int min_aifs; int max_txop; }; /** * struct hostapd_channel_data - Channel information */ struct hostapd_channel_data { /** * chan - Channel number (IEEE 802.11) */ short chan; /** * freq - Frequency in MHz */ int freq; /** * flag - Channel flags (HOSTAPD_CHAN_*) */ int flag; /** * allowed_bw - Allowed channel width bitmask * * See enum hostapd_chan_width_attr. */ u32 allowed_bw; /** * max_tx_power - Regulatory transmit power limit in dBm */ u8 max_tx_power; /** * survey_list - Linked list of surveys (struct freq_survey) */ struct dl_list survey_list; /** * min_nf - Minimum observed noise floor, in dBm, based on all * surveyed channel data */ s8 min_nf; #ifdef CONFIG_ACS /** * interference_factor - Computed interference factor on this * channel (used internally in src/ap/acs.c; driver wrappers do not * need to set this) */ long double interference_factor; #endif /* CONFIG_ACS */ /** * dfs_cac_ms - DFS CAC time in milliseconds */ unsigned int dfs_cac_ms; /** * wmm_rules_valid - Indicates wmm_rules state */ int wmm_rules_valid; /** * wmm_rules - WMM regulatory rules */ struct hostapd_wmm_rule wmm_rules[WMM_AC_NUM]; }; #define HE_MAX_MAC_CAPAB_SIZE 6 #define HE_MAX_PHY_CAPAB_SIZE 11 #define HE_MAX_MCS_CAPAB_SIZE 12 #define HE_MAX_PPET_CAPAB_SIZE 25 /** * struct he_capabilities - IEEE 802.11ax HE capabilities */ struct he_capabilities { u8 he_supported; u8 phy_cap[HE_MAX_PHY_CAPAB_SIZE]; u8 mac_cap[HE_MAX_MAC_CAPAB_SIZE]; u8 mcs[HE_MAX_MCS_CAPAB_SIZE]; u8 ppet[HE_MAX_PPET_CAPAB_SIZE]; }; #define HOSTAPD_MODE_FLAG_HT_INFO_KNOWN BIT(0) #define HOSTAPD_MODE_FLAG_VHT_INFO_KNOWN BIT(1) enum ieee80211_op_mode { IEEE80211_MODE_INFRA = 0, IEEE80211_MODE_IBSS = 1, IEEE80211_MODE_AP = 2, IEEE80211_MODE_MESH = 5, /* only add new entries before IEEE80211_MODE_NUM */ IEEE80211_MODE_NUM }; /** * struct ieee80211_edmg_config - EDMG configuration * * This structure describes most essential parameters needed * for IEEE 802.11ay EDMG configuration * * @channels: Bitmap that indicates the 2.16 GHz channel(s) * that are allowed to be used for transmissions. * Bit 0 indicates channel 1, bit 1 indicates channel 2, etc. * Set to 0 to indicate EDMG not supported. * @bw_config: Channel BW Configuration subfield encodes * the allowed channel bandwidth configurations */ struct ieee80211_edmg_config { u8 channels; enum edmg_bw_config bw_config; }; /** * struct hostapd_hw_modes - Supported hardware mode information */ struct hostapd_hw_modes { /** * mode - Hardware mode */ enum hostapd_hw_mode mode; /** * num_channels - Number of entries in the channels array */ int num_channels; /** * channels - Array of supported channels */ struct hostapd_channel_data *channels; /** * num_rates - Number of entries in the rates array */ int num_rates; /** * rates - Array of supported rates in 100 kbps units */ int *rates; /** * ht_capab - HT (IEEE 802.11n) capabilities */ u16 ht_capab; /** * mcs_set - MCS (IEEE 802.11n) rate parameters */ u8 mcs_set[16]; /** * a_mpdu_params - A-MPDU (IEEE 802.11n) parameters */ u8 a_mpdu_params; /** * vht_capab - VHT (IEEE 802.11ac) capabilities */ u32 vht_capab; /** * vht_mcs_set - VHT MCS (IEEE 802.11ac) rate parameters */ u8 vht_mcs_set[8]; unsigned int flags; /* HOSTAPD_MODE_FLAG_* */ /** * he_capab - HE (IEEE 802.11ax) capabilities */ struct he_capabilities he_capab[IEEE80211_MODE_NUM]; /** * This structure describes the most essential parameters needed * for IEEE 802.11ay EDMG configuration. */ struct ieee80211_edmg_config edmg; }; #define IEEE80211_CAP_ESS 0x0001 #define IEEE80211_CAP_IBSS 0x0002 #define IEEE80211_CAP_PRIVACY 0x0010 #define IEEE80211_CAP_RRM 0x1000 /* DMG (60 GHz) IEEE 802.11ad */ /* type - bits 0..1 */ #define IEEE80211_CAP_DMG_MASK 0x0003 #define IEEE80211_CAP_DMG_IBSS 0x0001 /* Tx by: STA */ #define IEEE80211_CAP_DMG_PBSS 0x0002 /* Tx by: PCP */ #define IEEE80211_CAP_DMG_AP 0x0003 /* Tx by: AP */ #define WPA_SCAN_QUAL_INVALID BIT(0) #define WPA_SCAN_NOISE_INVALID BIT(1) #define WPA_SCAN_LEVEL_INVALID BIT(2) #define WPA_SCAN_LEVEL_DBM BIT(3) #define WPA_SCAN_ASSOCIATED BIT(5) /** * struct wpa_scan_res - Scan result for an BSS/IBSS * @flags: information flags about the BSS/IBSS (WPA_SCAN_*) * @bssid: BSSID * @freq: frequency of the channel in MHz (e.g., 2412 = channel 1) * @beacon_int: beacon interval in TUs (host byte order) * @caps: capability information field in host byte order * @qual: signal quality * @noise: noise level * @level: signal level * @tsf: Timestamp * @age: Age of the information in milliseconds (i.e., how many milliseconds * ago the last Beacon or Probe Response frame was received) * @est_throughput: Estimated throughput in kbps (this is calculated during * scan result processing if left zero by the driver wrapper) * @snr: Signal-to-noise ratio in dB (calculated during scan result processing) * @parent_tsf: Time when the Beacon/Probe Response frame was received in terms * of TSF of the BSS specified by %tsf_bssid. * @tsf_bssid: The BSS that %parent_tsf TSF time refers to. * @ie_len: length of the following IE field in octets * @beacon_ie_len: length of the following Beacon IE field in octets * * This structure is used as a generic format for scan results from the * driver. Each driver interface implementation is responsible for converting * the driver or OS specific scan results into this format. * * If the driver does not support reporting all IEs, the IE data structure is * constructed of the IEs that are available. This field will also need to * include SSID in IE format. All drivers are encouraged to be extended to * report all IEs to make it easier to support future additions. * * This structure data is followed by ie_len octets of IEs from Probe Response * frame (or if the driver does not indicate source of IEs, these may also be * from Beacon frame). After the first set of IEs, another set of IEs may follow * (with beacon_ie_len octets of data) if the driver provides both IE sets. */ struct wpa_scan_res { unsigned int flags; u8 bssid[ETH_ALEN]; int freq; u16 beacon_int; u16 caps; int qual; int noise; int level; u64 tsf; unsigned int age; unsigned int est_throughput; int snr; u64 parent_tsf; u8 tsf_bssid[ETH_ALEN]; size_t ie_len; size_t beacon_ie_len; /* Followed by ie_len + beacon_ie_len octets of IE data */ }; /** * struct wpa_scan_results - Scan results * @res: Array of pointers to allocated variable length scan result entries * @num: Number of entries in the scan result array * @fetch_time: Time when the results were fetched from the driver */ struct wpa_scan_results { struct wpa_scan_res **res; size_t num; struct os_reltime fetch_time; }; /** * struct wpa_interface_info - Network interface information * @next: Pointer to the next interface or NULL if this is the last one * @ifname: Interface name that can be used with init() or init2() * @desc: Human readable adapter description (e.g., vendor/model) or NULL if * not available * @drv_name: struct wpa_driver_ops::name (note: unlike other strings, this one * is not an allocated copy, i.e., get_interfaces() caller will not free * this) */ struct wpa_interface_info { struct wpa_interface_info *next; char *ifname; char *desc; const char *drv_name; }; #define WPAS_MAX_SCAN_SSIDS 16 /** * struct wpa_driver_scan_ssid - SSIDs to scan for * @ssid - specific SSID to scan for (ProbeReq) * %NULL or zero-length SSID is used to indicate active scan * with wildcard SSID. * @ssid_len - Length of the SSID in octets */ struct wpa_driver_scan_ssid { const u8 *ssid; size_t ssid_len; }; /** * struct wpa_driver_scan_params - Scan parameters * Data for struct wpa_driver_ops::scan2(). */ struct wpa_driver_scan_params { /** * ssids - SSIDs to scan for */ struct wpa_driver_scan_ssid ssids[WPAS_MAX_SCAN_SSIDS]; /** * num_ssids - Number of entries in ssids array * Zero indicates a request for a passive scan. */ size_t num_ssids; /** * extra_ies - Extra IE(s) to add into Probe Request or %NULL */ const u8 *extra_ies; /** * extra_ies_len - Length of extra_ies in octets */ size_t extra_ies_len; /** * freqs - Array of frequencies to scan or %NULL for all frequencies * * The frequency is set in MHz. The array is zero-terminated. */ int *freqs; /** * filter_ssids - Filter for reporting SSIDs * * This optional parameter can be used to request the driver wrapper to * filter scan results to include only the specified SSIDs. %NULL * indicates that no filtering is to be done. This can be used to * reduce memory needs for scan results in environments that have large * number of APs with different SSIDs. * * The driver wrapper is allowed to take this allocated buffer into its * own use by setting the pointer to %NULL. In that case, the driver * wrapper is responsible for freeing the buffer with os_free() once it * is not needed anymore. */ struct wpa_driver_scan_filter { u8 ssid[SSID_MAX_LEN]; size_t ssid_len; } *filter_ssids; /** * num_filter_ssids - Number of entries in filter_ssids array */ size_t num_filter_ssids; /** * filter_rssi - Filter by RSSI * * The driver may filter scan results in firmware to reduce host * wakeups and thereby save power. Specify the RSSI threshold in s32 * dBm. */ s32 filter_rssi; /** * p2p_probe - Used to disable CCK (802.11b) rates for P2P probes * * When set, the driver is expected to remove rates 1, 2, 5.5, and 11 * Mbps from the support rates element(s) in the Probe Request frames * and not to transmit the frames at any of those rates. */ unsigned int p2p_probe:1; /** * only_new_results - Request driver to report only new results * * This is used to request the driver to report only BSSes that have * been detected after this scan request has been started, i.e., to * flush old cached BSS entries. */ unsigned int only_new_results:1; /** * low_priority - Requests driver to use a lower scan priority * * This is used to request the driver to use a lower scan priority * if it supports such a thing. */ unsigned int low_priority:1; /** * mac_addr_rand - Requests driver to randomize MAC address */ unsigned int mac_addr_rand:1; /** * mac_addr - MAC address used with randomization. The address cannot be * a multicast one, i.e., bit 0 of byte 0 should not be set. */ u8 *mac_addr; /** * mac_addr_mask - MAC address mask used with randomization. * * Bits that are 0 in the mask should be randomized. Bits that are 1 in * the mask should be taken as is from mac_addr. The mask should not * allow the generation of a multicast address, i.e., bit 0 of byte 0 * must be set. */ const u8 *mac_addr_mask; /** * sched_scan_plans - Scan plans for scheduled scan * * Each scan plan consists of the number of iterations to scan and the * interval between scans. When a scan plan finishes (i.e., it was run * for the specified number of iterations), the next scan plan is * executed. The scan plans are executed in the order they appear in * the array (lower index first). The last scan plan will run infinitely * (until requested to stop), thus must not specify the number of * iterations. All other scan plans must specify the number of * iterations. */ struct sched_scan_plan { u32 interval; /* In seconds */ u32 iterations; /* Zero to run infinitely */ } *sched_scan_plans; /** * sched_scan_plans_num - Number of scan plans in sched_scan_plans array */ unsigned int sched_scan_plans_num; /** * sched_scan_start_delay - Delay to use before starting the first scan * * Delay (in seconds) before scheduling first scan plan cycle. The * driver may ignore this parameter and start immediately (or at any * other time), if this feature is not supported. */ u32 sched_scan_start_delay; /** * bssid - Specific BSSID to scan for * * This optional parameter can be used to replace the default wildcard * BSSID with a specific BSSID to scan for if results are needed from * only a single BSS. */ const u8 *bssid; /** * scan_cookie - Unique identification representing the scan request * * This scan_cookie carries a unique identification representing the * scan request if the host driver/kernel supports concurrent scan * requests. This cookie is returned from the corresponding driver * interface. * * Note: Unlike other parameters in this structure, scan_cookie is used * only to return information instead of setting parameters for the * scan. */ u64 scan_cookie; /** * duration - Dwell time on each channel * * This optional parameter can be used to set the dwell time on each * channel. In TUs. */ u16 duration; /** * duration_mandatory - Whether the specified duration is mandatory * * If this is set, the duration specified by the %duration field is * mandatory (and the driver should reject the scan request if it is * unable to comply with the specified duration), otherwise it is the * maximum duration and the actual duration may be shorter. */ unsigned int duration_mandatory:1; /** * relative_rssi_set - Whether relative RSSI parameters are set */ unsigned int relative_rssi_set:1; /** * relative_rssi - Relative RSSI for reporting better BSSs * * Amount of RSSI by which a BSS should be better than the current * connected BSS to report the new BSS to user space. */ s8 relative_rssi; /** * relative_adjust_band - Band to which RSSI should be adjusted * * The relative_adjust_rssi should be added to the band specified * by relative_adjust_band. */ enum set_band relative_adjust_band; /** * relative_adjust_rssi - RSSI to be added to relative_adjust_band * * An amount of relative_band_rssi should be added to the BSSs that * belong to the band specified by relative_adjust_band while comparing * with other bands for BSS reporting. */ s8 relative_adjust_rssi; /** * oce_scan * * Enable the following OCE scan features: (WFA OCE TechSpec v1.0) * - Accept broadcast Probe Response frame. * - Probe Request frame deferral and suppression. * - Max Channel Time - driver fills FILS request params IE with * Maximum Channel Time. * - Send 1st Probe Request frame in rate of minimum 5.5 Mbps. */ unsigned int oce_scan:1; /* * NOTE: Whenever adding new parameters here, please make sure * wpa_scan_clone_params() and wpa_scan_free_params() get updated with * matching changes. */ }; /** * struct wpa_driver_auth_params - Authentication parameters * Data for struct wpa_driver_ops::authenticate(). */ struct wpa_driver_auth_params { int freq; const u8 *bssid; const u8 *ssid; size_t ssid_len; int auth_alg; const u8 *ie; size_t ie_len; const u8 *wep_key[4]; size_t wep_key_len[4]; int wep_tx_keyidx; int local_state_change; /** * p2p - Whether this connection is a P2P group */ int p2p; /** * auth_data - Additional elements for Authentication frame * * This buffer starts with the Authentication transaction sequence * number field. If no special handling of such elements is needed, this * pointer is %NULL. This is used with SAE and FILS. */ const u8 *auth_data; /** * auth_data_len - Length of auth_data buffer in octets */ size_t auth_data_len; }; /** * enum wps_mode - WPS mode */ enum wps_mode { /** * WPS_MODE_NONE - No WPS provisioning being used */ WPS_MODE_NONE, /** * WPS_MODE_OPEN - WPS provisioning with AP that is in open mode */ WPS_MODE_OPEN, /** * WPS_MODE_PRIVACY - WPS provisioning with AP that is using protection */ WPS_MODE_PRIVACY }; /** * struct hostapd_freq_params - Channel parameters */ struct hostapd_freq_params { /** * mode - Mode/band (HOSTAPD_MODE_IEEE80211A, ..) */ enum hostapd_hw_mode mode; /** * freq - Primary channel center frequency in MHz */ int freq; /** * channel - Channel number */ int channel; /** * ht_enabled - Whether HT is enabled */ int ht_enabled; /** * sec_channel_offset - Secondary channel offset for HT40 * * 0 = HT40 disabled, * -1 = HT40 enabled, secondary channel below primary, * 1 = HT40 enabled, secondary channel above primary */ int sec_channel_offset; /** * vht_enabled - Whether VHT is enabled */ int vht_enabled; /** * he_enabled - Whether HE is enabled */ int he_enabled; /** * center_freq1 - Segment 0 center frequency in MHz * * Valid for both HT and VHT. */ int center_freq1; /** * center_freq2 - Segment 1 center frequency in MHz * * Non-zero only for bandwidth 80 and an 80+80 channel */ int center_freq2; /** * bandwidth - Channel bandwidth in MHz (20, 40, 80, 160) */ int bandwidth; /** * This structure describes the most essential parameters needed * for IEEE 802.11ay EDMG configuration. */ struct ieee80211_edmg_config edmg; }; /** * struct wpa_driver_sta_auth_params - Authentication parameters * Data for struct wpa_driver_ops::sta_auth(). */ struct wpa_driver_sta_auth_params { /** * own_addr - Source address and BSSID for authentication frame */ const u8 *own_addr; /** * addr - MAC address of the station to associate */ const u8 *addr; /** * seq - authentication sequence number */ u16 seq; /** * status - authentication response status code */ u16 status; /** * ie - authentication frame ie buffer */ const u8 *ie; /** * len - ie buffer length */ size_t len; /** * fils_auth - Indicates whether FILS authentication is being performed */ int fils_auth; /** * fils_anonce - ANonce (required for FILS) */ u8 fils_anonce[WPA_NONCE_LEN]; /** * fils_snonce - SNonce (required for FILS) */ u8 fils_snonce[WPA_NONCE_LEN]; /** * fils_kek - key for encryption (required for FILS) */ u8 fils_kek[WPA_KEK_MAX_LEN]; /** * fils_kek_len - Length of the fils_kek in octets (required for FILS) */ size_t fils_kek_len; }; /** * struct wpa_driver_associate_params - Association parameters * Data for struct wpa_driver_ops::associate(). */ struct wpa_driver_associate_params { /** * bssid - BSSID of the selected AP * This can be %NULL, if ap_scan=2 mode is used and the driver is * responsible for selecting with which BSS to associate. */ const u8 *bssid; /** * bssid_hint - BSSID of a proposed AP * * This indicates which BSS has been found a suitable candidate for * initial association for drivers that use driver/firmwate-based BSS * selection. Unlike the @bssid parameter, @bssid_hint does not limit * the driver from selecting other BSSes in the ESS. */ const u8 *bssid_hint; /** * ssid - The selected SSID */ const u8 *ssid; /** * ssid_len - Length of the SSID (1..32) */ size_t ssid_len; /** * freq - channel parameters */ struct hostapd_freq_params freq; /** * freq_hint - Frequency of the channel the proposed AP is using * * This provides a channel on which a suitable BSS has been found as a * hint for the driver. Unlike the @freq parameter, @freq_hint does not * limit the driver from selecting other channels for * driver/firmware-based BSS selection. */ int freq_hint; /** * bg_scan_period - Background scan period in seconds, 0 to disable * background scan, or -1 to indicate no change to default driver * configuration */ int bg_scan_period; /** * beacon_int - Beacon interval for IBSS or 0 to use driver default */ int beacon_int; /** * wpa_ie - WPA information element for (Re)Association Request * WPA information element to be included in (Re)Association * Request (including information element id and length). Use * of this WPA IE is optional. If the driver generates the WPA * IE, it can use pairwise_suite, group_suite, group_mgmt_suite, and * key_mgmt_suite to select proper algorithms. In this case, * the driver has to notify wpa_supplicant about the used WPA * IE by generating an event that the interface code will * convert into EVENT_ASSOCINFO data (see below). * * When using WPA2/IEEE 802.11i, wpa_ie is used for RSN IE * instead. The driver can determine which version is used by * looking at the first byte of the IE (0xdd for WPA, 0x30 for * WPA2/RSN). * * When using WPS, wpa_ie is used for WPS IE instead of WPA/RSN IE. */ const u8 *wpa_ie; /** * wpa_ie_len - length of the wpa_ie */ size_t wpa_ie_len; /** * wpa_proto - Bitfield of WPA_PROTO_* values to indicate WPA/WPA2 */ unsigned int wpa_proto; /** * pairwise_suite - Selected pairwise cipher suite (WPA_CIPHER_*) * * This is usually ignored if @wpa_ie is used. */ unsigned int pairwise_suite; /** * group_suite - Selected group cipher suite (WPA_CIPHER_*) * * This is usually ignored if @wpa_ie is used. */ unsigned int group_suite; /** * mgmt_group_suite - Selected group management cipher suite (WPA_CIPHER_*) * * This is usually ignored if @wpa_ie is used. */ unsigned int mgmt_group_suite; /** * key_mgmt_suite - Selected key management suite (WPA_KEY_MGMT_*) * * This is usually ignored if @wpa_ie is used. */ unsigned int key_mgmt_suite; /** * auth_alg - Allowed authentication algorithms * Bit field of WPA_AUTH_ALG_* */ int auth_alg; /** * mode - Operation mode (infra/ibss) IEEE80211_MODE_* */ int mode; /** * wep_key - WEP keys for static WEP configuration */ const u8 *wep_key[4]; /** * wep_key_len - WEP key length for static WEP configuration */ size_t wep_key_len[4]; /** * wep_tx_keyidx - WEP TX key index for static WEP configuration */ int wep_tx_keyidx; /** * mgmt_frame_protection - IEEE 802.11w management frame protection */ enum mfp_options mgmt_frame_protection; /** * passphrase - RSN passphrase for PSK * * This value is made available only for WPA/WPA2-Personal (PSK) and * only for drivers that set WPA_DRIVER_FLAGS_4WAY_HANDSHAKE_PSK. This * is the 8..63 character ASCII passphrase, if available. Please note * that this can be %NULL if passphrase was not used to generate the * PSK. In that case, the psk field must be used to fetch the PSK. */ const char *passphrase; /** * psk - RSN PSK (alternative for passphrase for PSK) * * This value is made available only for WPA/WPA2-Personal (PSK) and * only for drivers that set WPA_DRIVER_FLAGS_4WAY_HANDSHAKE_PSK. This * is the 32-octet (256-bit) PSK, if available. The driver wrapper * should be prepared to handle %NULL value as an error. */ const u8 *psk; /** * drop_unencrypted - Enable/disable unencrypted frame filtering * * Configure the driver to drop all non-EAPOL frames (both receive and * transmit paths). Unencrypted EAPOL frames (ethertype 0x888e) must * still be allowed for key negotiation. */ int drop_unencrypted; /** * prev_bssid - Previously used BSSID in this ESS * * When not %NULL, this is a request to use reassociation instead of * association. */ const u8 *prev_bssid; /** * wps - WPS mode * * If the driver needs to do special configuration for WPS association, * this variable provides more information on what type of association * is being requested. Most drivers should not need ot use this. */ enum wps_mode wps; /** * p2p - Whether this connection is a P2P group */ int p2p; /** * uapsd - UAPSD parameters for the network * -1 = do not change defaults * AP mode: 1 = enabled, 0 = disabled * STA mode: bits 0..3 UAPSD enabled for VO,VI,BK,BE */ int uapsd; /** * fixed_bssid - Whether to force this BSSID in IBSS mode * 1 = Fix this BSSID and prevent merges. * 0 = Do not fix BSSID. */ int fixed_bssid; /** * fixed_freq - Fix control channel in IBSS mode * 0 = don't fix control channel (default) * 1 = fix control channel; this prevents IBSS merging with another * channel */ int fixed_freq; /** * disable_ht - Disable HT (IEEE 802.11n) for this connection */ int disable_ht; /** * htcaps - HT Capabilities over-rides * * Only bits set in the mask will be used, and not all values are used * by the kernel anyway. Currently, MCS, MPDU and MSDU fields are used. * * Pointer to struct ieee80211_ht_capabilities. */ const u8 *htcaps; /** * htcaps_mask - HT Capabilities over-rides mask * * Pointer to struct ieee80211_ht_capabilities. */ const u8 *htcaps_mask; #ifdef CONFIG_VHT_OVERRIDES /** * disable_vht - Disable VHT for this connection */ int disable_vht; /** * VHT capability overrides. */ const struct ieee80211_vht_capabilities *vhtcaps; const struct ieee80211_vht_capabilities *vhtcaps_mask; #endif /* CONFIG_VHT_OVERRIDES */ /** * req_key_mgmt_offload - Request key management offload for connection * * Request key management offload for this connection if the device * supports it. */ int req_key_mgmt_offload; /** * req_handshake_offload - Request EAPOL handshake offload * * Request EAPOL handshake offload for this connection if the device * supports it. */ int req_handshake_offload; /** * Flag for indicating whether this association includes support for * RRM (Radio Resource Measurements) */ int rrm_used; /** * pbss - If set, connect to a PCP in a PBSS. Otherwise, connect to an * AP as usual. Valid for DMG network only. */ int pbss; /** * fils_kek - KEK for FILS association frame protection (AES-SIV) */ const u8 *fils_kek; /** * fils_kek_len: Length of fils_kek in bytes */ size_t fils_kek_len; /** * fils_nonces - Nonces for FILS association frame protection * (AES-SIV AAD) */ const u8 *fils_nonces; /** * fils_nonces_len: Length of fils_nonce in bytes */ size_t fils_nonces_len; /** * fils_erp_username - Username part of keyName-NAI */ const u8 *fils_erp_username; /** * fils_erp_username_len - Length of fils_erp_username in bytes */ size_t fils_erp_username_len; /** * fils_erp_realm - Realm/domain name to use in FILS ERP */ const u8 *fils_erp_realm; /** * fils_erp_realm_len - Length of fils_erp_realm in bytes */ size_t fils_erp_realm_len; /** * fils_erp_next_seq_num - The next sequence number to use in FILS ERP * messages */ u16 fils_erp_next_seq_num; /** * fils_erp_rrk - Re-authentication root key (rRK) for the keyName-NAI * specified by fils_erp_username@fils_erp_realm. */ const u8 *fils_erp_rrk; /** * fils_erp_rrk_len - Length of fils_erp_rrk in bytes */ size_t fils_erp_rrk_len; }; enum hide_ssid { NO_SSID_HIDING, HIDDEN_SSID_ZERO_LEN, HIDDEN_SSID_ZERO_CONTENTS }; enum ch_switch_state { CH_SW_STARTED, CH_SW_FINISHED }; struct wowlan_triggers { u8 any; u8 disconnect; u8 magic_pkt; u8 gtk_rekey_failure; u8 eap_identity_req; u8 four_way_handshake; u8 rfkill_release; }; struct wpa_driver_ap_params { /** * head - Beacon head from IEEE 802.11 header to IEs before TIM IE */ u8 *head; /** * head_len - Length of the head buffer in octets */ size_t head_len; /** * tail - Beacon tail following TIM IE */ u8 *tail; /** * tail_len - Length of the tail buffer in octets */ size_t tail_len; /** * dtim_period - DTIM period */ int dtim_period; /** * beacon_int - Beacon interval */ int beacon_int; /** * basic_rates: -1 terminated array of basic rates in 100 kbps * * This parameter can be used to set a specific basic rate set for the * BSS. If %NULL, default basic rate set is used. */ int *basic_rates; /** * beacon_rate: Beacon frame data rate * * This parameter can be used to set a specific Beacon frame data rate * for the BSS. The interpretation of this value depends on the * rate_type (legacy: in 100 kbps units, HT: HT-MCS, VHT: VHT-MCS). If * beacon_rate == 0 and rate_type == 0 (BEACON_RATE_LEGACY), the default * Beacon frame data rate is used. */ unsigned int beacon_rate; /** * beacon_rate_type: Beacon data rate type (legacy/HT/VHT) */ enum beacon_rate_type rate_type; /** * proberesp - Probe Response template * * This is used by drivers that reply to Probe Requests internally in * AP mode and require the full Probe Response template. */ u8 *proberesp; /** * proberesp_len - Length of the proberesp buffer in octets */ size_t proberesp_len; /** * ssid - The SSID to use in Beacon/Probe Response frames */ const u8 *ssid; /** * ssid_len - Length of the SSID (1..32) */ size_t ssid_len; /** * hide_ssid - Whether to hide the SSID */ enum hide_ssid hide_ssid; /** * pairwise_ciphers - WPA_CIPHER_* bitfield */ unsigned int pairwise_ciphers; /** * group_cipher - WPA_CIPHER_* */ unsigned int group_cipher; /** * key_mgmt_suites - WPA_KEY_MGMT_* bitfield */ unsigned int key_mgmt_suites; /** * auth_algs - WPA_AUTH_ALG_* bitfield */ unsigned int auth_algs; /** * wpa_version - WPA_PROTO_* bitfield */ unsigned int wpa_version; /** * privacy - Whether privacy is used in the BSS */ int privacy; /** * beacon_ies - WPS/P2P IE(s) for Beacon frames * * This is used to add IEs like WPS IE and P2P IE by drivers that do * not use the full Beacon template. */ const struct wpabuf *beacon_ies; /** * proberesp_ies - P2P/WPS IE(s) for Probe Response frames * * This is used to add IEs like WPS IE and P2P IE by drivers that * reply to Probe Request frames internally. */ const struct wpabuf *proberesp_ies; /** * assocresp_ies - WPS IE(s) for (Re)Association Response frames * * This is used to add IEs like WPS IE by drivers that reply to * (Re)Association Request frames internally. */ const struct wpabuf *assocresp_ies; /** * isolate - Whether to isolate frames between associated stations * * If this is non-zero, the AP is requested to disable forwarding of * frames between associated stations. */ int isolate; /** * cts_protect - Whether CTS protection is enabled */ int cts_protect; /** * preamble - Whether short preamble is enabled */ int preamble; /** * short_slot_time - Whether short slot time is enabled * * 0 = short slot time disable, 1 = short slot time enabled, -1 = do * not set (e.g., when 802.11g mode is not in use) */ int short_slot_time; /** * ht_opmode - HT operation mode or -1 if HT not in use */ int ht_opmode; /** * interworking - Whether Interworking is enabled */ int interworking; /** * hessid - Homogeneous ESS identifier or %NULL if not set */ const u8 *hessid; /** * access_network_type - Access Network Type (0..15) * * This is used for filtering Probe Request frames when Interworking is * enabled. */ u8 access_network_type; /** * ap_max_inactivity - Timeout in seconds to detect STA's inactivity * * This is used by driver which advertises this capability. */ int ap_max_inactivity; /** * ctwindow - Client Traffic Window (in TUs) */ u8 p2p_go_ctwindow; /** * smps_mode - SMPS mode * * SMPS mode to be used by the AP, specified as the relevant bits of * ht_capab (i.e. HT_CAP_INFO_SMPS_*). */ unsigned int smps_mode; /** * disable_dgaf - Whether group-addressed frames are disabled */ int disable_dgaf; /** * osen - Whether OSEN security is enabled */ int osen; /** * freq - Channel parameters for dynamic bandwidth changes */ struct hostapd_freq_params *freq; /** * reenable - Whether this is to re-enable beaconing */ int reenable; /** * pbss - Whether to start a PCP (in PBSS) instead of an AP in * infrastructure BSS. Valid only for DMG network. */ int pbss; /** * multicast_to_unicast - Whether to use multicast_to_unicast * * If this is non-zero, the AP is requested to perform multicast to * unicast conversion for ARP, IPv4, and IPv6 frames (possibly within * 802.1Q). If enabled, such frames are to be sent to each station * separately, with the DA replaced by their own MAC address rather * than the group address. * * Note that this may break certain expectations of the receiver, such * as the ability to drop unicast IP packets received within multicast * L2 frames, or the ability to not send ICMP destination unreachable * messages for packets received in L2 multicast (which is required, * but the receiver can't tell the difference if this new option is * enabled.) * * This also doesn't implement the 802.11 DMS (directed multicast * service). */ int multicast_to_unicast; /** * ftm_responder - Whether FTM responder is enabled */ int ftm_responder; /** * lci - Binary data, the content of an LCI report IE with type 8 as * defined in IEEE Std 802.11-2016, 9.4.2.22.10 */ const struct wpabuf *lci; /** * civic - Binary data, the content of a measurement report IE with * type 11 as defined in IEEE Std 802.11-2016, 9.4.2.22.13 */ const struct wpabuf *civic; /** * he_spr - Whether Spatial Reuse is enabled */ int he_spr; /** * he_spr_srg_obss_pd_min_offset - Minimum TX power offset */ int he_spr_srg_obss_pd_min_offset; /** * he_spr_srg_obss_pd_max_offset - Maximum TX power offset */ int he_spr_srg_obss_pd_max_offset; }; struct wpa_driver_mesh_bss_params { #define WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS 0x00000001 #define WPA_DRIVER_MESH_CONF_FLAG_PEER_LINK_TIMEOUT 0x00000002 #define WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS 0x00000004 #define WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE 0x00000008 #define WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD 0x00000010 /* * TODO: Other mesh configuration parameters would go here. * See NL80211_MESHCONF_* for all the mesh config parameters. */ unsigned int flags; int auto_plinks; int peer_link_timeout; int max_peer_links; int rssi_threshold; u16 ht_opmode; }; struct wpa_driver_mesh_join_params { const u8 *meshid; int meshid_len; const int *basic_rates; const u8 *ies; int ie_len; struct hostapd_freq_params freq; int beacon_int; int dtim_period; struct wpa_driver_mesh_bss_params conf; #define WPA_DRIVER_MESH_FLAG_USER_MPM 0x00000001 #define WPA_DRIVER_MESH_FLAG_DRIVER_MPM 0x00000002 #define WPA_DRIVER_MESH_FLAG_SAE_AUTH 0x00000004 #define WPA_DRIVER_MESH_FLAG_AMPE 0x00000008 unsigned int flags; }; /** * struct wpa_driver_capa - Driver capability information */ struct wpa_driver_capa { #define WPA_DRIVER_CAPA_KEY_MGMT_WPA 0x00000001 #define WPA_DRIVER_CAPA_KEY_MGMT_WPA2 0x00000002 #define WPA_DRIVER_CAPA_KEY_MGMT_WPA_PSK 0x00000004 #define WPA_DRIVER_CAPA_KEY_MGMT_WPA2_PSK 0x00000008 #define WPA_DRIVER_CAPA_KEY_MGMT_WPA_NONE 0x00000010 #define WPA_DRIVER_CAPA_KEY_MGMT_FT 0x00000020 #define WPA_DRIVER_CAPA_KEY_MGMT_FT_PSK 0x00000040 #define WPA_DRIVER_CAPA_KEY_MGMT_WAPI_PSK 0x00000080 #define WPA_DRIVER_CAPA_KEY_MGMT_SUITE_B 0x00000100 #define WPA_DRIVER_CAPA_KEY_MGMT_SUITE_B_192 0x00000200 #define WPA_DRIVER_CAPA_KEY_MGMT_OWE 0x00000400 #define WPA_DRIVER_CAPA_KEY_MGMT_DPP 0x00000800 #define WPA_DRIVER_CAPA_KEY_MGMT_FILS_SHA256 0x00001000 #define WPA_DRIVER_CAPA_KEY_MGMT_FILS_SHA384 0x00002000 #define WPA_DRIVER_CAPA_KEY_MGMT_FT_FILS_SHA256 0x00004000 #define WPA_DRIVER_CAPA_KEY_MGMT_FT_FILS_SHA384 0x00008000 #define WPA_DRIVER_CAPA_KEY_MGMT_SAE 0x00010000 /** Bitfield of supported key management suites */ unsigned int key_mgmt; #define WPA_DRIVER_CAPA_ENC_WEP40 0x00000001 #define WPA_DRIVER_CAPA_ENC_WEP104 0x00000002 #define WPA_DRIVER_CAPA_ENC_TKIP 0x00000004 #define WPA_DRIVER_CAPA_ENC_CCMP 0x00000008 #define WPA_DRIVER_CAPA_ENC_WEP128 0x00000010 #define WPA_DRIVER_CAPA_ENC_GCMP 0x00000020 #define WPA_DRIVER_CAPA_ENC_GCMP_256 0x00000040 #define WPA_DRIVER_CAPA_ENC_CCMP_256 0x00000080 #define WPA_DRIVER_CAPA_ENC_BIP 0x00000100 #define WPA_DRIVER_CAPA_ENC_BIP_GMAC_128 0x00000200 #define WPA_DRIVER_CAPA_ENC_BIP_GMAC_256 0x00000400 #define WPA_DRIVER_CAPA_ENC_BIP_CMAC_256 0x00000800 #define WPA_DRIVER_CAPA_ENC_GTK_NOT_USED 0x00001000 /** Bitfield of supported cipher suites */ unsigned int enc; #define WPA_DRIVER_AUTH_OPEN 0x00000001 #define WPA_DRIVER_AUTH_SHARED 0x00000002 #define WPA_DRIVER_AUTH_LEAP 0x00000004 /** Bitfield of supported IEEE 802.11 authentication algorithms */ unsigned int auth; /** Driver generated WPA/RSN IE */ #define WPA_DRIVER_FLAGS_DRIVER_IE 0x00000001 /** Driver needs static WEP key setup after association command */ #define WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC 0x00000002 /** Driver takes care of all DFS operations */ #define WPA_DRIVER_FLAGS_DFS_OFFLOAD 0x00000004 /** Driver takes care of RSN 4-way handshake internally; PMK is configured with * struct wpa_driver_ops::set_key using alg = WPA_ALG_PMK */ #define WPA_DRIVER_FLAGS_4WAY_HANDSHAKE_8021X 0x00000008 /** Driver is for a wired Ethernet interface */ #define WPA_DRIVER_FLAGS_WIRED 0x00000010 /** Driver provides separate commands for authentication and association (SME in * wpa_supplicant). */ #define WPA_DRIVER_FLAGS_SME 0x00000020 /** Driver supports AP mode */ #define WPA_DRIVER_FLAGS_AP 0x00000040 /** Driver needs static WEP key setup after association has been completed */ #define WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC_DONE 0x00000080 /** Driver supports dynamic HT 20/40 MHz channel changes during BSS lifetime */ #define WPA_DRIVER_FLAGS_HT_2040_COEX 0x00000100 /** Driver supports concurrent P2P operations */ #define WPA_DRIVER_FLAGS_P2P_CONCURRENT 0x00000200 /** * Driver uses the initial interface as a dedicated management interface, i.e., * it cannot be used for P2P group operations or non-P2P purposes. */ #define WPA_DRIVER_FLAGS_P2P_DEDICATED_INTERFACE 0x00000400 /** This interface is P2P capable (P2P GO or P2P Client) */ #define WPA_DRIVER_FLAGS_P2P_CAPABLE 0x00000800 /** Driver supports station and key removal when stopping an AP */ #define WPA_DRIVER_FLAGS_AP_TEARDOWN_SUPPORT 0x00001000 /** * Driver uses the initial interface for P2P management interface and non-P2P * purposes (e.g., connect to infra AP), but this interface cannot be used for * P2P group operations. */ #define WPA_DRIVER_FLAGS_P2P_MGMT_AND_NON_P2P 0x00002000 /** * Driver is known to use sane error codes, i.e., when it indicates that * something (e.g., association) fails, there was indeed a failure and the * operation does not end up getting completed successfully later. */ #define WPA_DRIVER_FLAGS_SANE_ERROR_CODES 0x00004000 /** Driver supports off-channel TX */ #define WPA_DRIVER_FLAGS_OFFCHANNEL_TX 0x00008000 /** Driver indicates TX status events for EAPOL Data frames */ #define WPA_DRIVER_FLAGS_EAPOL_TX_STATUS 0x00010000 /** Driver indicates TX status events for Deauth/Disassoc frames */ #define WPA_DRIVER_FLAGS_DEAUTH_TX_STATUS 0x00020000 /** Driver supports roaming (BSS selection) in firmware */ #define WPA_DRIVER_FLAGS_BSS_SELECTION 0x00040000 /** Driver supports operating as a TDLS peer */ #define WPA_DRIVER_FLAGS_TDLS_SUPPORT 0x00080000 /** Driver requires external TDLS setup/teardown/discovery */ #define WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP 0x00100000 /** Driver indicates support for Probe Response offloading in AP mode */ #define WPA_DRIVER_FLAGS_PROBE_RESP_OFFLOAD 0x00200000 /** Driver supports U-APSD in AP mode */ #define WPA_DRIVER_FLAGS_AP_UAPSD 0x00400000 /** Driver supports inactivity timer in AP mode */ #define WPA_DRIVER_FLAGS_INACTIVITY_TIMER 0x00800000 /** Driver expects user space implementation of MLME in AP mode */ #define WPA_DRIVER_FLAGS_AP_MLME 0x01000000 /** Driver supports SAE with user space SME */ #define WPA_DRIVER_FLAGS_SAE 0x02000000 /** Driver makes use of OBSS scan mechanism in wpa_supplicant */ #define WPA_DRIVER_FLAGS_OBSS_SCAN 0x04000000 /** Driver supports IBSS (Ad-hoc) mode */ #define WPA_DRIVER_FLAGS_IBSS 0x08000000 /** Driver supports radar detection */ #define WPA_DRIVER_FLAGS_RADAR 0x10000000 /** Driver supports a dedicated interface for P2P Device */ #define WPA_DRIVER_FLAGS_DEDICATED_P2P_DEVICE 0x20000000 /** Driver supports QoS Mapping */ #define WPA_DRIVER_FLAGS_QOS_MAPPING 0x40000000 /** Driver supports CSA in AP mode */ #define WPA_DRIVER_FLAGS_AP_CSA 0x80000000 /** Driver supports mesh */ #define WPA_DRIVER_FLAGS_MESH 0x0000000100000000ULL /** Driver support ACS offload */ #define WPA_DRIVER_FLAGS_ACS_OFFLOAD 0x0000000200000000ULL /** Driver supports key management offload */ #define WPA_DRIVER_FLAGS_KEY_MGMT_OFFLOAD 0x0000000400000000ULL /** Driver supports TDLS channel switching */ #define WPA_DRIVER_FLAGS_TDLS_CHANNEL_SWITCH 0x0000000800000000ULL /** Driver supports IBSS with HT datarates */ #define WPA_DRIVER_FLAGS_HT_IBSS 0x0000001000000000ULL /** Driver supports IBSS with VHT datarates */ #define WPA_DRIVER_FLAGS_VHT_IBSS 0x0000002000000000ULL /** Driver supports automatic band selection */ #define WPA_DRIVER_FLAGS_SUPPORT_HW_MODE_ANY 0x0000004000000000ULL /** Driver supports simultaneous off-channel operations */ #define WPA_DRIVER_FLAGS_OFFCHANNEL_SIMULTANEOUS 0x0000008000000000ULL /** Driver supports full AP client state */ #define WPA_DRIVER_FLAGS_FULL_AP_CLIENT_STATE 0x0000010000000000ULL /** Driver supports P2P Listen offload */ #define WPA_DRIVER_FLAGS_P2P_LISTEN_OFFLOAD 0x0000020000000000ULL /** Driver supports FILS */ #define WPA_DRIVER_FLAGS_SUPPORT_FILS 0x0000040000000000ULL /** Driver supports Beacon frame TX rate configuration (legacy rates) */ #define WPA_DRIVER_FLAGS_BEACON_RATE_LEGACY 0x0000080000000000ULL /** Driver supports Beacon frame TX rate configuration (HT rates) */ #define WPA_DRIVER_FLAGS_BEACON_RATE_HT 0x0000100000000000ULL /** Driver supports Beacon frame TX rate configuration (VHT rates) */ #define WPA_DRIVER_FLAGS_BEACON_RATE_VHT 0x0000200000000000ULL /** Driver supports mgmt_tx with random TX address in non-connected state */ #define WPA_DRIVER_FLAGS_MGMT_TX_RANDOM_TA 0x0000400000000000ULL /** Driver supports mgmt_tx with random TX addr in connected state */ #define WPA_DRIVER_FLAGS_MGMT_TX_RANDOM_TA_CONNECTED 0x0000800000000000ULL /** Driver supports better BSS reporting with sched_scan in connected mode */ #define WPA_DRIVER_FLAGS_SCHED_SCAN_RELATIVE_RSSI 0x0001000000000000ULL /** Driver supports HE capabilities */ #define WPA_DRIVER_FLAGS_HE_CAPABILITIES 0x0002000000000000ULL /** Driver supports FILS shared key offload */ #define WPA_DRIVER_FLAGS_FILS_SK_OFFLOAD 0x0004000000000000ULL /** Driver supports all OCE STA specific mandatory features */ #define WPA_DRIVER_FLAGS_OCE_STA 0x0008000000000000ULL /** Driver supports all OCE AP specific mandatory features */ #define WPA_DRIVER_FLAGS_OCE_AP 0x0010000000000000ULL /** * Driver supports all OCE STA-CFON specific mandatory features only. * If a driver sets this bit but not the %WPA_DRIVER_FLAGS_OCE_AP, the * userspace shall assume that this driver may not support all OCE AP * functionality but can support only OCE STA-CFON functionality. */ #define WPA_DRIVER_FLAGS_OCE_STA_CFON 0x0020000000000000ULL /** Driver supports MFP-optional in the connect command */ #define WPA_DRIVER_FLAGS_MFP_OPTIONAL 0x0040000000000000ULL /** Driver is a self-managed regulatory device */ #define WPA_DRIVER_FLAGS_SELF_MANAGED_REGULATORY 0x0080000000000000ULL /** Driver supports FTM responder functionality */ #define WPA_DRIVER_FLAGS_FTM_RESPONDER 0x0100000000000000ULL /** Driver support 4-way handshake offload for WPA-Personal */ #define WPA_DRIVER_FLAGS_4WAY_HANDSHAKE_PSK 0x0200000000000000ULL u64 flags; #define FULL_AP_CLIENT_STATE_SUPP(drv_flags) \ (drv_flags & WPA_DRIVER_FLAGS_FULL_AP_CLIENT_STATE) #define WPA_DRIVER_SMPS_MODE_STATIC 0x00000001 #define WPA_DRIVER_SMPS_MODE_DYNAMIC 0x00000002 unsigned int smps_modes; unsigned int wmm_ac_supported:1; unsigned int mac_addr_rand_scan_supported:1; unsigned int mac_addr_rand_sched_scan_supported:1; /** Maximum number of supported active probe SSIDs */ int max_scan_ssids; /** Maximum number of supported active probe SSIDs for sched_scan */ int max_sched_scan_ssids; /** Maximum number of supported scan plans for scheduled scan */ unsigned int max_sched_scan_plans; /** Maximum interval in a scan plan. In seconds */ u32 max_sched_scan_plan_interval; /** Maximum number of iterations in a single scan plan */ u32 max_sched_scan_plan_iterations; /** Whether sched_scan (offloaded scanning) is supported */ int sched_scan_supported; /** Maximum number of supported match sets for sched_scan */ int max_match_sets; /** * max_remain_on_chan - Maximum remain-on-channel duration in msec */ unsigned int max_remain_on_chan; /** * max_stations - Maximum number of associated stations the driver * supports in AP mode */ unsigned int max_stations; /** * probe_resp_offloads - Bitmap of supported protocols by the driver * for Probe Response offloading. */ /** Driver Probe Response offloading support for WPS ver. 1 */ #define WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS 0x00000001 /** Driver Probe Response offloading support for WPS ver. 2 */ #define WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS2 0x00000002 /** Driver Probe Response offloading support for P2P */ #define WPA_DRIVER_PROBE_RESP_OFFLOAD_P2P 0x00000004 /** Driver Probe Response offloading support for IEEE 802.11u (Interworking) */ #define WPA_DRIVER_PROBE_RESP_OFFLOAD_INTERWORKING 0x00000008 unsigned int probe_resp_offloads; unsigned int max_acl_mac_addrs; /** * Number of supported concurrent channels */ unsigned int num_multichan_concurrent; /** * extended_capa - extended capabilities in driver/device * * Must be allocated and freed by driver and the pointers must be * valid for the lifetime of the driver, i.e., freed in deinit() */ const u8 *extended_capa, *extended_capa_mask; unsigned int extended_capa_len; struct wowlan_triggers wowlan_triggers; /** Driver adds the DS Params Set IE in Probe Request frames */ #define WPA_DRIVER_FLAGS_DS_PARAM_SET_IE_IN_PROBES 0x00000001 /** Driver adds the WFA TPC IE in Probe Request frames */ #define WPA_DRIVER_FLAGS_WFA_TPC_IE_IN_PROBES 0x00000002 /** Driver handles quiet period requests */ #define WPA_DRIVER_FLAGS_QUIET 0x00000004 /** * Driver is capable of inserting the current TX power value into the body of * transmitted frames. * Background: Some Action frames include a TPC Report IE. This IE contains a * TX power field, which has to be updated by lower layers. One such Action * frame is Link Measurement Report (part of RRM). Another is TPC Report (part * of spectrum management). Note that this insertion takes place at a fixed * offset, namely the 6th byte in the Action frame body. */ #define WPA_DRIVER_FLAGS_TX_POWER_INSERTION 0x00000008 /** * Driver supports RRM. With this support, the driver will accept to use RRM in * (Re)Association Request frames, without supporting quiet period. */ #define WPA_DRIVER_FLAGS_SUPPORT_RRM 0x00000010 /** Driver supports setting the scan dwell time */ #define WPA_DRIVER_FLAGS_SUPPORT_SET_SCAN_DWELL 0x00000020 /** Driver supports Beacon Report Measurement */ #define WPA_DRIVER_FLAGS_SUPPORT_BEACON_REPORT 0x00000040 u32 rrm_flags; /* Driver concurrency capabilities */ unsigned int conc_capab; /* Maximum number of concurrent channels on 2.4 GHz */ unsigned int max_conc_chan_2_4; /* Maximum number of concurrent channels on 5 GHz */ unsigned int max_conc_chan_5_0; /* Maximum number of supported CSA counters */ u16 max_csa_counters; }; struct hostapd_data; #define STA_DRV_DATA_TX_MCS BIT(0) #define STA_DRV_DATA_RX_MCS BIT(1) #define STA_DRV_DATA_TX_VHT_MCS BIT(2) #define STA_DRV_DATA_RX_VHT_MCS BIT(3) #define STA_DRV_DATA_TX_VHT_NSS BIT(4) #define STA_DRV_DATA_RX_VHT_NSS BIT(5) #define STA_DRV_DATA_TX_SHORT_GI BIT(6) #define STA_DRV_DATA_RX_SHORT_GI BIT(7) #define STA_DRV_DATA_LAST_ACK_RSSI BIT(8) struct hostap_sta_driver_data { unsigned long rx_packets, tx_packets; unsigned long long rx_bytes, tx_bytes; unsigned long long rx_airtime, tx_airtime; int bytes_64bit; /* whether 64-bit byte counters are supported */ unsigned long current_tx_rate; unsigned long current_rx_rate; unsigned long inactive_msec; unsigned long flags; /* bitfield of STA_DRV_DATA_* */ unsigned long num_ps_buf_frames; unsigned long tx_retry_failed; unsigned long tx_retry_count; s8 last_ack_rssi; unsigned long backlog_packets; unsigned long backlog_bytes; s8 signal; u8 rx_vhtmcs; u8 tx_vhtmcs; u8 rx_mcs; u8 tx_mcs; u8 rx_vht_nss; u8 tx_vht_nss; }; struct hostapd_sta_add_params { const u8 *addr; u16 aid; u16 capability; const u8 *supp_rates; size_t supp_rates_len; u16 listen_interval; const struct ieee80211_ht_capabilities *ht_capabilities; const struct ieee80211_vht_capabilities *vht_capabilities; int vht_opmode_enabled; u8 vht_opmode; const struct ieee80211_he_capabilities *he_capab; size_t he_capab_len; u32 flags; /* bitmask of WPA_STA_* flags */ u32 flags_mask; /* unset bits in flags */ #ifdef CONFIG_MESH enum mesh_plink_state plink_state; u16 peer_aid; #endif /* CONFIG_MESH */ int set; /* Set STA parameters instead of add */ u8 qosinfo; const u8 *ext_capab; size_t ext_capab_len; const u8 *supp_channels; size_t supp_channels_len; const u8 *supp_oper_classes; size_t supp_oper_classes_len; int support_p2p_ps; }; struct mac_address { u8 addr[ETH_ALEN]; }; struct hostapd_acl_params { u8 acl_policy; unsigned int num_mac_acl; struct mac_address mac_acl[0]; }; enum wpa_driver_if_type { /** * WPA_IF_STATION - Station mode interface */ WPA_IF_STATION, /** * WPA_IF_AP_VLAN - AP mode VLAN interface * * This interface shares its address and Beacon frame with the main * BSS. */ WPA_IF_AP_VLAN, /** * WPA_IF_AP_BSS - AP mode BSS interface * * This interface has its own address and Beacon frame. */ WPA_IF_AP_BSS, /** * WPA_IF_P2P_GO - P2P Group Owner */ WPA_IF_P2P_GO, /** * WPA_IF_P2P_CLIENT - P2P Client */ WPA_IF_P2P_CLIENT, /** * WPA_IF_P2P_GROUP - P2P Group interface (will become either * WPA_IF_P2P_GO or WPA_IF_P2P_CLIENT, but the role is not yet known) */ WPA_IF_P2P_GROUP, /** * WPA_IF_P2P_DEVICE - P2P Device interface is used to indentify the * abstracted P2P Device function in the driver */ WPA_IF_P2P_DEVICE, /* * WPA_IF_MESH - Mesh interface */ WPA_IF_MESH, /* * WPA_IF_TDLS - TDLS offchannel interface (used for pref freq only) */ WPA_IF_TDLS, /* * WPA_IF_IBSS - IBSS interface (used for pref freq only) */ WPA_IF_IBSS, }; struct wpa_init_params { void *global_priv; const u8 *bssid; const char *ifname; const char *driver_params; int use_pae_group_addr; char **bridge; size_t num_bridge; u8 *own_addr; /* buffer for writing own MAC address */ }; struct wpa_bss_params { /** Interface name (for multi-SSID/VLAN support) */ const char *ifname; /** Whether IEEE 802.1X or WPA/WPA2 is enabled */ int enabled; int wpa; int ieee802_1x; int wpa_group; int wpa_pairwise; int wpa_key_mgmt; int rsn_preauth; enum mfp_options ieee80211w; }; #define WPA_STA_AUTHORIZED BIT(0) #define WPA_STA_WMM BIT(1) #define WPA_STA_SHORT_PREAMBLE BIT(2) #define WPA_STA_MFP BIT(3) #define WPA_STA_TDLS_PEER BIT(4) #define WPA_STA_AUTHENTICATED BIT(5) #define WPA_STA_ASSOCIATED BIT(6) enum tdls_oper { TDLS_DISCOVERY_REQ, TDLS_SETUP, TDLS_TEARDOWN, TDLS_ENABLE_LINK, TDLS_DISABLE_LINK, TDLS_ENABLE, TDLS_DISABLE }; enum wnm_oper { WNM_SLEEP_ENTER_CONFIRM, WNM_SLEEP_ENTER_FAIL, WNM_SLEEP_EXIT_CONFIRM, WNM_SLEEP_EXIT_FAIL, WNM_SLEEP_TFS_REQ_IE_ADD, /* STA requests driver to add TFS req IE */ WNM_SLEEP_TFS_REQ_IE_NONE, /* STA requests empty TFS req IE */ WNM_SLEEP_TFS_REQ_IE_SET, /* AP requests driver to set TFS req IE for * a STA */ WNM_SLEEP_TFS_RESP_IE_ADD, /* AP requests driver to add TFS resp IE * for a STA */ WNM_SLEEP_TFS_RESP_IE_NONE, /* AP requests empty TFS resp IE */ WNM_SLEEP_TFS_RESP_IE_SET, /* AP requests driver to set TFS resp IE * for a STA */ WNM_SLEEP_TFS_IE_DEL /* AP delete the TFS IE */ }; /* enum smps_mode - SMPS mode definitions */ enum smps_mode { SMPS_AUTOMATIC, SMPS_OFF, SMPS_DYNAMIC, SMPS_STATIC, /* Keep last */ SMPS_INVALID, }; #define WPA_INVALID_NOISE 9999 /** * struct wpa_signal_info - Information about channel signal quality * @frequency: control frequency * @above_threshold: true if the above threshold was crossed * (relevant for a CQM event) * @current_signal: in dBm * @avg_signal: in dBm * @avg_beacon_signal: in dBm * @current_noise: %WPA_INVALID_NOISE if not supported * @current_txrate: current TX rate * @chanwidth: channel width * @center_frq1: center frequency for the first segment * @center_frq2: center frequency for the second segment (if relevant) */ struct wpa_signal_info { u32 frequency; int above_threshold; int current_signal; int avg_signal; int avg_beacon_signal; int current_noise; int current_txrate; enum chan_width chanwidth; int center_frq1; int center_frq2; }; /** * struct wpa_channel_info - Information about the current channel * @frequency: Center frequency of the primary 20 MHz channel * @chanwidth: Width of the current operating channel * @sec_channel: Location of the secondary 20 MHz channel (either +1 or -1). * This field is only filled in when using a 40 MHz channel. * @center_frq1: Center frequency of frequency segment 0 * @center_frq2: Center frequency of frequency segment 1 (for 80+80 channels) * @seg1_idx: Frequency segment 1 index when using a 80+80 channel. This is * derived from center_frq2 for convenience. */ struct wpa_channel_info { u32 frequency; enum chan_width chanwidth; int sec_channel; int center_frq1; int center_frq2; u8 seg1_idx; }; /** * struct beacon_data - Beacon data * @head: Head portion of Beacon frame (before TIM IE) * @tail: Tail portion of Beacon frame (after TIM IE) * @beacon_ies: Extra information element(s) to add into Beacon frames or %NULL * @proberesp_ies: Extra information element(s) to add into Probe Response * frames or %NULL * @assocresp_ies: Extra information element(s) to add into (Re)Association * Response frames or %NULL * @probe_resp: Probe Response frame template * @head_len: Length of @head * @tail_len: Length of @tail * @beacon_ies_len: Length of beacon_ies in octets * @proberesp_ies_len: Length of proberesp_ies in octets * @proberesp_ies_len: Length of proberesp_ies in octets * @probe_resp_len: Length of probe response template (@probe_resp) */ struct beacon_data { u8 *head, *tail; u8 *beacon_ies; u8 *proberesp_ies; u8 *assocresp_ies; u8 *probe_resp; size_t head_len, tail_len; size_t beacon_ies_len; size_t proberesp_ies_len; size_t assocresp_ies_len; size_t probe_resp_len; }; /** * struct csa_settings - Settings for channel switch command * @cs_count: Count in Beacon frames (TBTT) to perform the switch * @block_tx: 1 - block transmission for CSA period * @freq_params: Next channel frequency parameter * @beacon_csa: Beacon/probe resp/asooc resp info for CSA period * @beacon_after: Next beacon/probe resp/asooc resp info * @counter_offset_beacon: Offset to the count field in beacon's tail * @counter_offset_presp: Offset to the count field in probe resp. */ struct csa_settings { u8 cs_count; u8 block_tx; struct hostapd_freq_params freq_params; struct beacon_data beacon_csa; struct beacon_data beacon_after; u16 counter_offset_beacon[2]; u16 counter_offset_presp[2]; }; /* TDLS peer capabilities for send_tdls_mgmt() */ enum tdls_peer_capability { TDLS_PEER_HT = BIT(0), TDLS_PEER_VHT = BIT(1), TDLS_PEER_WMM = BIT(2), }; /* valid info in the wmm_params struct */ enum wmm_params_valid_info { WMM_PARAMS_UAPSD_QUEUES_INFO = BIT(0), }; /** * struct wmm_params - WMM parameterss configured for this association * @info_bitmap: Bitmap of valid wmm_params info; indicates what fields * of the struct contain valid information. * @uapsd_queues: Bitmap of ACs configured for uapsd (valid only if * %WMM_PARAMS_UAPSD_QUEUES_INFO is set) */ struct wmm_params { u8 info_bitmap; u8 uapsd_queues; }; #ifdef CONFIG_MACSEC struct macsec_init_params { Boolean always_include_sci; Boolean use_es; Boolean use_scb; }; #endif /* CONFIG_MACSEC */ enum drv_br_port_attr { DRV_BR_PORT_ATTR_PROXYARP, DRV_BR_PORT_ATTR_HAIRPIN_MODE, }; enum drv_br_net_param { DRV_BR_NET_PARAM_GARP_ACCEPT, DRV_BR_MULTICAST_SNOOPING, }; struct drv_acs_params { /* Selected mode (HOSTAPD_MODE_*) */ enum hostapd_hw_mode hw_mode; /* Indicates whether HT is enabled */ int ht_enabled; /* Indicates whether HT40 is enabled */ int ht40_enabled; /* Indicates whether VHT is enabled */ int vht_enabled; /* Configured ACS channel width */ u16 ch_width; /* ACS frequency list info */ const int *freq_list; }; struct wpa_bss_trans_info { u8 mbo_transition_reason; u8 n_candidates; u8 *bssid; }; struct wpa_bss_candidate_info { u8 num; struct candidate_list { u8 bssid[ETH_ALEN]; u8 is_accept; u32 reject_reason; } *candidates; }; struct wpa_pmkid_params { const u8 *bssid; const u8 *ssid; size_t ssid_len; const u8 *fils_cache_id; const u8 *pmkid; const u8 *pmk; size_t pmk_len; }; /* Mask used to specify which connection parameters have to be updated */ enum wpa_drv_update_connect_params_mask { WPA_DRV_UPDATE_ASSOC_IES = BIT(0), WPA_DRV_UPDATE_FILS_ERP_INFO = BIT(1), WPA_DRV_UPDATE_AUTH_TYPE = BIT(2), }; /** * struct external_auth - External authentication trigger parameters * * These are used across the external authentication request and event * interfaces. * @action: Action type / trigger for external authentication. Only significant * for the event interface. * @bssid: BSSID of the peer with which the authentication has to happen. Used * by both the request and event interface. * @ssid: SSID of the AP. Used by both the request and event interface. * @ssid_len: SSID length in octets. * @key_mgmt_suite: AKM suite of the respective authentication. Optional for * the request interface. * @status: Status code, %WLAN_STATUS_SUCCESS for successful authentication, * use %WLAN_STATUS_UNSPECIFIED_FAILURE if wpa_supplicant cannot give * the real status code for failures. Used only for the request interface * from user space to the driver. * @pmkid: Generated PMKID as part of external auth exchange (e.g., SAE). */ struct external_auth { enum { EXT_AUTH_START, EXT_AUTH_ABORT, } action; const u8 *bssid; const u8 *ssid; size_t ssid_len; unsigned int key_mgmt_suite; u16 status; const u8 *pmkid; }; /** * struct wpa_driver_ops - Driver interface API definition * * This structure defines the API that each driver interface needs to implement * for core wpa_supplicant code. All driver specific functionality is captured * in this wrapper. */ struct wpa_driver_ops { /** Name of the driver interface */ const char *name; /** One line description of the driver interface */ const char *desc; /** * get_bssid - Get the current BSSID * @priv: private driver interface data * @bssid: buffer for BSSID (ETH_ALEN = 6 bytes) * * Returns: 0 on success, -1 on failure * * Query kernel driver for the current BSSID and copy it to bssid. * Setting bssid to 00:00:00:00:00:00 is recommended if the STA is not * associated. */ int (*get_bssid)(void *priv, u8 *bssid); /** * get_ssid - Get the current SSID * @priv: private driver interface data * @ssid: buffer for SSID (at least 32 bytes) * * Returns: Length of the SSID on success, -1 on failure * * Query kernel driver for the current SSID and copy it to ssid. * Returning zero is recommended if the STA is not associated. * * Note: SSID is an array of octets, i.e., it is not nul terminated and * can, at least in theory, contain control characters (including nul) * and as such, should be processed as binary data, not a printable * string. */ int (*get_ssid)(void *priv, u8 *ssid); /** * set_key - Configure encryption key * @ifname: Interface name (for multi-SSID/VLAN support) * @priv: private driver interface data * @alg: encryption algorithm (%WPA_ALG_NONE, %WPA_ALG_WEP, * %WPA_ALG_TKIP, %WPA_ALG_CCMP, %WPA_ALG_IGTK, %WPA_ALG_PMK, * %WPA_ALG_GCMP, %WPA_ALG_GCMP_256, %WPA_ALG_CCMP_256, * %WPA_ALG_BIP_GMAC_128, %WPA_ALG_BIP_GMAC_256, * %WPA_ALG_BIP_CMAC_256); * %WPA_ALG_NONE clears the key. * @addr: Address of the peer STA (BSSID of the current AP when setting * pairwise key in station mode), ff:ff:ff:ff:ff:ff for * broadcast keys, %NULL for default keys that are used both for * broadcast and unicast; when clearing keys, %NULL is used to * indicate that both the broadcast-only and default key of the * specified key index is to be cleared * @key_idx: key index (0..3), usually 0 for unicast keys; 0..4095 for * IGTK * @set_tx: configure this key as the default Tx key (only used when * driver does not support separate unicast/individual key * @seq: sequence number/packet number, seq_len octets, the next * packet number to be used for in replay protection; configured * for Rx keys (in most cases, this is only used with broadcast * keys and set to zero for unicast keys); %NULL if not set * @seq_len: length of the seq, depends on the algorithm: * TKIP: 6 octets, CCMP/GCMP: 6 octets, IGTK: 6 octets * @key: key buffer; TKIP: 16-byte temporal key, 8-byte Tx Mic key, * 8-byte Rx Mic Key * @key_len: length of the key buffer in octets (WEP: 5 or 13, * TKIP: 32, CCMP/GCMP: 16, IGTK: 16) * * Returns: 0 on success, -1 on failure * * Configure the given key for the kernel driver. If the driver * supports separate individual keys (4 default keys + 1 individual), * addr can be used to determine whether the key is default or * individual. If only 4 keys are supported, the default key with key * index 0 is used as the individual key. STA must be configured to use * it as the default Tx key (set_tx is set) and accept Rx for all the * key indexes. In most cases, WPA uses only key indexes 1 and 2 for * broadcast keys, so key index 0 is available for this kind of * configuration. * * Please note that TKIP keys include separate TX and RX MIC keys and * some drivers may expect them in different order than wpa_supplicant * is using. If the TX/RX keys are swapped, all TKIP encrypted packets * will trigger Michael MIC errors. This can be fixed by changing the * order of MIC keys by swapping te bytes 16..23 and 24..31 of the key * in driver_*.c set_key() implementation, see driver_ndis.c for an * example on how this can be done. */ int (*set_key)(const char *ifname, void *priv, enum wpa_alg alg, const u8 *addr, int key_idx, int set_tx, const u8 *seq, size_t seq_len, const u8 *key, size_t key_len); /** * init - Initialize driver interface * @ctx: context to be used when calling wpa_supplicant functions, * e.g., wpa_supplicant_event() * @ifname: interface name, e.g., wlan0 * * Returns: Pointer to private data, %NULL on failure * * Initialize driver interface, including event processing for kernel * driver events (e.g., associated, scan results, Michael MIC failure). * This function can allocate a private configuration data area for * @ctx, file descriptor, interface name, etc. information that may be * needed in future driver operations. If this is not used, non-NULL * value will need to be returned because %NULL is used to indicate * failure. The returned value will be used as 'void *priv' data for * all other driver_ops functions. * * The main event loop (eloop.c) of wpa_supplicant can be used to * register callback for read sockets (eloop_register_read_sock()). * * See below for more information about events and * wpa_supplicant_event() function. */ void * (*init)(void *ctx, const char *ifname); /** * deinit - Deinitialize driver interface * @priv: private driver interface data from init() * * Shut down driver interface and processing of driver events. Free * private data buffer if one was allocated in init() handler. */ void (*deinit)(void *priv); /** * set_param - Set driver configuration parameters * @priv: private driver interface data from init() * @param: driver specific configuration parameters * * Returns: 0 on success, -1 on failure * * Optional handler for notifying driver interface about configuration * parameters (driver_param). */ int (*set_param)(void *priv, const char *param); /** * set_countermeasures - Enable/disable TKIP countermeasures * @priv: private driver interface data * @enabled: 1 = countermeasures enabled, 0 = disabled * * Returns: 0 on success, -1 on failure * * Configure TKIP countermeasures. When these are enabled, the driver * should drop all received and queued frames that are using TKIP. */ int (*set_countermeasures)(void *priv, int enabled); /** * deauthenticate - Request driver to deauthenticate * @priv: private driver interface data * @addr: peer address (BSSID of the AP) * @reason_code: 16-bit reason code to be sent in the deauthentication * frame * * Returns: 0 on success, -1 on failure */ int (*deauthenticate)(void *priv, const u8 *addr, u16 reason_code); /** * associate - Request driver to associate * @priv: private driver interface data * @params: association parameters * * Returns: 0 on success, -1 on failure */ int (*associate)(void *priv, struct wpa_driver_associate_params *params); /** * add_pmkid - Add PMKSA cache entry to the driver * @priv: private driver interface data * @params: PMKSA parameters * * Returns: 0 on success, -1 on failure * * This function is called when a new PMK is received, as a result of * either normal authentication or RSN pre-authentication. The PMKSA * parameters are either a set of bssid, pmkid, and pmk; or a set of * ssid, fils_cache_id, pmkid, and pmk. * * If the driver generates RSN IE, i.e., it does not use wpa_ie in * associate(), add_pmkid() can be used to add new PMKSA cache entries * in the driver. If the driver uses wpa_ie from wpa_supplicant, this * driver_ops function does not need to be implemented. Likewise, if * the driver does not support WPA, this function is not needed. */ int (*add_pmkid)(void *priv, struct wpa_pmkid_params *params); /** * remove_pmkid - Remove PMKSA cache entry to the driver * @priv: private driver interface data * @params: PMKSA parameters * * Returns: 0 on success, -1 on failure * * This function is called when the supplicant drops a PMKSA cache * entry for any reason. The PMKSA parameters are either a set of * bssid and pmkid; or a set of ssid, fils_cache_id, and pmkid. * * If the driver generates RSN IE, i.e., it does not use wpa_ie in * associate(), remove_pmkid() can be used to synchronize PMKSA caches * between the driver and wpa_supplicant. If the driver uses wpa_ie * from wpa_supplicant, this driver_ops function does not need to be * implemented. Likewise, if the driver does not support WPA, this * function is not needed. */ int (*remove_pmkid)(void *priv, struct wpa_pmkid_params *params); /** * flush_pmkid - Flush PMKSA cache * @priv: private driver interface data * * Returns: 0 on success, -1 on failure * * This function is called when the supplicant drops all PMKSA cache * entries for any reason. * * If the driver generates RSN IE, i.e., it does not use wpa_ie in * associate(), remove_pmkid() can be used to synchronize PMKSA caches * between the driver and wpa_supplicant. If the driver uses wpa_ie * from wpa_supplicant, this driver_ops function does not need to be * implemented. Likewise, if the driver does not support WPA, this * function is not needed. */ int (*flush_pmkid)(void *priv); /** * get_capa - Get driver capabilities * @priv: private driver interface data * * Returns: 0 on success, -1 on failure * * Get driver/firmware/hardware capabilities. */ int (*get_capa)(void *priv, struct wpa_driver_capa *capa); /** * poll - Poll driver for association information * @priv: private driver interface data * * This is an option callback that can be used when the driver does not * provide event mechanism for association events. This is called when * receiving WPA EAPOL-Key messages that require association * information. The driver interface is supposed to generate associnfo * event before returning from this callback function. In addition, the * driver interface should generate an association event after having * sent out associnfo. */ void (*poll)(void *priv); /** * get_ifindex - Get interface index * @priv: private driver interface data * * Returns: Interface index */ unsigned int (*get_ifindex)(void *priv); /** * get_ifname - Get interface name * @priv: private driver interface data * * Returns: Pointer to the interface name. This can differ from the * interface name used in init() call. Init() is called first. * * This optional function can be used to allow the driver interface to * replace the interface name with something else, e.g., based on an * interface mapping from a more descriptive name. */ const char * (*get_ifname)(void *priv); /** * get_mac_addr - Get own MAC address * @priv: private driver interface data * * Returns: Pointer to own MAC address or %NULL on failure * * This optional function can be used to get the own MAC address of the * device from the driver interface code. This is only needed if the * l2_packet implementation for the OS does not provide easy access to * a MAC address. */ const u8 * (*get_mac_addr)(void *priv); /** * set_operstate - Sets device operating state to DORMANT or UP * @priv: private driver interface data * @state: 0 = dormant, 1 = up * Returns: 0 on success, -1 on failure * * This is an optional function that can be used on operating systems * that support a concept of controlling network device state from user * space applications. This function, if set, gets called with * state = 1 when authentication has been completed and with state = 0 * when connection is lost. */ int (*set_operstate)(void *priv, int state); /** * mlme_setprotection - MLME-SETPROTECTION.request primitive * @priv: Private driver interface data * @addr: Address of the station for which to set protection (may be * %NULL for group keys) * @protect_type: MLME_SETPROTECTION_PROTECT_TYPE_* * @key_type: MLME_SETPROTECTION_KEY_TYPE_* * Returns: 0 on success, -1 on failure * * This is an optional function that can be used to set the driver to * require protection for Tx and/or Rx frames. This uses the layer * interface defined in IEEE 802.11i-2004 clause 10.3.22.1 * (MLME-SETPROTECTION.request). Many drivers do not use explicit * set protection operation; instead, they set protection implicitly * based on configured keys. */ int (*mlme_setprotection)(void *priv, const u8 *addr, int protect_type, int key_type); /** * get_hw_feature_data - Get hardware support data (channels and rates) * @priv: Private driver interface data * @num_modes: Variable for returning the number of returned modes * flags: Variable for returning hardware feature flags * @dfs: Variable for returning DFS region (HOSTAPD_DFS_REGION_*) * Returns: Pointer to allocated hardware data on success or %NULL on * failure. Caller is responsible for freeing this. */ struct hostapd_hw_modes * (*get_hw_feature_data)(void *priv, u16 *num_modes, u16 *flags, u8 *dfs); /** * send_mlme - Send management frame from MLME * @priv: Private driver interface data * @data: IEEE 802.11 management frame with IEEE 802.11 header * @data_len: Size of the management frame * @noack: Do not wait for this frame to be acked (disable retries) * @freq: Frequency (in MHz) to send the frame on, or 0 to let the * driver decide * @csa_offs: Array of CSA offsets or %NULL * @csa_offs_len: Number of elements in csa_offs * @no_encrypt: Do not encrypt frame even if appropriate key exists * (used only for testing purposes) * Returns: 0 on success, -1 on failure */ int (*send_mlme)(void *priv, const u8 *data, size_t data_len, int noack, unsigned int freq, const u16 *csa_offs, size_t csa_offs_len, int no_encrypt); /** * update_ft_ies - Update FT (IEEE 802.11r) IEs * @priv: Private driver interface data * @md: Mobility domain (2 octets) (also included inside ies) * @ies: FT IEs (MDIE, FTIE, ...) or %NULL to remove IEs * @ies_len: Length of FT IEs in bytes * Returns: 0 on success, -1 on failure * * The supplicant uses this callback to let the driver know that keying * material for FT is available and that the driver can use the * provided IEs in the next message in FT authentication sequence. * * This function is only needed for driver that support IEEE 802.11r * (Fast BSS Transition). */ int (*update_ft_ies)(void *priv, const u8 *md, const u8 *ies, size_t ies_len); /** * get_scan_results2 - Fetch the latest scan results * @priv: private driver interface data * * Returns: Allocated buffer of scan results (caller is responsible for * freeing the data structure) on success, NULL on failure */ struct wpa_scan_results * (*get_scan_results2)(void *priv); /** * set_country - Set country * @priv: Private driver interface data * @alpha2: country to which to switch to * Returns: 0 on success, -1 on failure * * This function is for drivers which support some form * of setting a regulatory domain. */ int (*set_country)(void *priv, const char *alpha2); /** * get_country - Get country * @priv: Private driver interface data * @alpha2: Buffer for returning country code (at least 3 octets) * Returns: 0 on success, -1 on failure */ int (*get_country)(void *priv, char *alpha2); /** * global_init - Global driver initialization * @ctx: wpa_global pointer * Returns: Pointer to private data (global), %NULL on failure * * This optional function is called to initialize the driver wrapper * for global data, i.e., data that applies to all interfaces. If this * function is implemented, global_deinit() will also need to be * implemented to free the private data. The driver will also likely * use init2() function instead of init() to get the pointer to global * data available to per-interface initializer. */ void * (*global_init)(void *ctx); /** * global_deinit - Global driver deinitialization * @priv: private driver global data from global_init() * * Terminate any global driver related functionality and free the * global data structure. */ void (*global_deinit)(void *priv); /** * init2 - Initialize driver interface (with global data) * @ctx: context to be used when calling wpa_supplicant functions, * e.g., wpa_supplicant_event() * @ifname: interface name, e.g., wlan0 * @global_priv: private driver global data from global_init() * Returns: Pointer to private data, %NULL on failure * * This function can be used instead of init() if the driver wrapper * uses global data. */ void * (*init2)(void *ctx, const char *ifname, void *global_priv); /** * get_interfaces - Get information about available interfaces * @global_priv: private driver global data from global_init() * Returns: Allocated buffer of interface information (caller is * responsible for freeing the data structure) on success, NULL on * failure */ struct wpa_interface_info * (*get_interfaces)(void *global_priv); /** * scan2 - Request the driver to initiate scan * @priv: private driver interface data * @params: Scan parameters * * Returns: 0 on success, -1 on failure * * Once the scan results are ready, the driver should report scan * results event for wpa_supplicant which will eventually request the * results with wpa_driver_get_scan_results2(). */ int (*scan2)(void *priv, struct wpa_driver_scan_params *params); /** * authenticate - Request driver to authenticate * @priv: private driver interface data * @params: authentication parameters * Returns: 0 on success, -1 on failure * * This is an optional function that can be used with drivers that * support separate authentication and association steps, i.e., when * wpa_supplicant can act as the SME. If not implemented, associate() * function is expected to take care of IEEE 802.11 authentication, * too. */ int (*authenticate)(void *priv, struct wpa_driver_auth_params *params); /** * set_ap - Set Beacon and Probe Response information for AP mode * @priv: Private driver interface data * @params: Parameters to use in AP mode * * This function is used to configure Beacon template and/or extra IEs * to add for Beacon and Probe Response frames for the driver in * AP mode. The driver is responsible for building the full Beacon * frame by concatenating the head part with TIM IE generated by the * driver/firmware and finishing with the tail part. Depending on the * driver architectue, this can be done either by using the full * template or the set of additional IEs (e.g., WPS and P2P IE). * Similarly, Probe Response processing depends on the driver design. * If the driver (or firmware) takes care of replying to Probe Request * frames, the extra IEs provided here needs to be added to the Probe * Response frames. * * Returns: 0 on success, -1 on failure */ int (*set_ap)(void *priv, struct wpa_driver_ap_params *params); /** * set_acl - Set ACL in AP mode * @priv: Private driver interface data * @params: Parameters to configure ACL * Returns: 0 on success, -1 on failure * * This is used only for the drivers which support MAC address ACL. */ int (*set_acl)(void *priv, struct hostapd_acl_params *params); /** * hapd_init - Initialize driver interface (hostapd only) * @hapd: Pointer to hostapd context * @params: Configuration for the driver wrapper * Returns: Pointer to private data, %NULL on failure * * This function is used instead of init() or init2() when the driver * wrapper is used with hostapd. */ void * (*hapd_init)(struct hostapd_data *hapd, struct wpa_init_params *params); /** * hapd_deinit - Deinitialize driver interface (hostapd only) * @priv: Private driver interface data from hapd_init() */ void (*hapd_deinit)(void *priv); /** * set_ieee8021x - Enable/disable IEEE 802.1X support (AP only) * @priv: Private driver interface data * @params: BSS parameters * Returns: 0 on success, -1 on failure * * This is an optional function to configure the kernel driver to * enable/disable IEEE 802.1X support and set WPA/WPA2 parameters. This * can be left undefined (set to %NULL) if IEEE 802.1X support is * always enabled and the driver uses set_ap() to set WPA/RSN IE * for Beacon frames. * * DEPRECATED - use set_ap() instead */ int (*set_ieee8021x)(void *priv, struct wpa_bss_params *params); /** * set_privacy - Enable/disable privacy (AP only) * @priv: Private driver interface data * @enabled: 1 = privacy enabled, 0 = disabled * Returns: 0 on success, -1 on failure * * This is an optional function to configure privacy field in the * kernel driver for Beacon frames. This can be left undefined (set to * %NULL) if the driver uses the Beacon template from set_ap(). * * DEPRECATED - use set_ap() instead */ int (*set_privacy)(void *priv, int enabled); /** * get_seqnum - Fetch the current TSC/packet number (AP only) * @ifname: The interface name (main or virtual) * @priv: Private driver interface data * @addr: MAC address of the station or %NULL for group keys * @idx: Key index * @seq: Buffer for returning the latest used TSC/packet number * Returns: 0 on success, -1 on failure * * This function is used to fetch the last used TSC/packet number for * a TKIP, CCMP, GCMP, or BIP/IGTK key. It is mainly used with group * keys, so there is no strict requirement on implementing support for * unicast keys (i.e., addr != %NULL). */ int (*get_seqnum)(const char *ifname, void *priv, const u8 *addr, int idx, u8 *seq); /** * flush - Flush all association stations (AP only) * @priv: Private driver interface data * Returns: 0 on success, -1 on failure * * This function requests the driver to disassociate all associated * stations. This function does not need to be implemented if the * driver does not process association frames internally. */ int (*flush)(void *priv); /** * set_generic_elem - Add IEs into Beacon/Probe Response frames (AP) * @priv: Private driver interface data * @elem: Information elements * @elem_len: Length of the elem buffer in octets * Returns: 0 on success, -1 on failure * * This is an optional function to add information elements in the * kernel driver for Beacon and Probe Response frames. This can be left * undefined (set to %NULL) if the driver uses the Beacon template from * set_ap(). * * DEPRECATED - use set_ap() instead */ int (*set_generic_elem)(void *priv, const u8 *elem, size_t elem_len); /** * read_sta_data - Fetch station data * @priv: Private driver interface data * @data: Buffer for returning station information * @addr: MAC address of the station * Returns: 0 on success, -1 on failure */ int (*read_sta_data)(void *priv, struct hostap_sta_driver_data *data, const u8 *addr); /** * hapd_send_eapol - Send an EAPOL packet (AP only) * @priv: private driver interface data * @addr: Destination MAC address * @data: EAPOL packet starting with IEEE 802.1X header * @data_len: Length of the EAPOL packet in octets * @encrypt: Whether the frame should be encrypted * @own_addr: Source MAC address * @flags: WPA_STA_* flags for the destination station * * Returns: 0 on success, -1 on failure */ int (*hapd_send_eapol)(void *priv, const u8 *addr, const u8 *data, size_t data_len, int encrypt, const u8 *own_addr, u32 flags); /** * sta_deauth - Deauthenticate a station (AP only) * @priv: Private driver interface data * @own_addr: Source address and BSSID for the Deauthentication frame * @addr: MAC address of the station to deauthenticate * @reason: Reason code for the Deauthentiation frame * Returns: 0 on success, -1 on failure * * This function requests a specific station to be deauthenticated and * a Deauthentication frame to be sent to it. */ int (*sta_deauth)(void *priv, const u8 *own_addr, const u8 *addr, u16 reason); /** * sta_disassoc - Disassociate a station (AP only) * @priv: Private driver interface data * @own_addr: Source address and BSSID for the Disassociation frame * @addr: MAC address of the station to disassociate * @reason: Reason code for the Disassociation frame * Returns: 0 on success, -1 on failure * * This function requests a specific station to be disassociated and * a Disassociation frame to be sent to it. */ int (*sta_disassoc)(void *priv, const u8 *own_addr, const u8 *addr, u16 reason); /** * sta_remove - Remove a station entry (AP only) * @priv: Private driver interface data * @addr: MAC address of the station to be removed * Returns: 0 on success, -1 on failure */ int (*sta_remove)(void *priv, const u8 *addr); /** * hapd_get_ssid - Get the current SSID (AP only) * @priv: Private driver interface data * @buf: Buffer for returning the SSID * @len: Maximum length of the buffer * Returns: Length of the SSID on success, -1 on failure * * This function need not be implemented if the driver uses Beacon * template from set_ap() and does not reply to Probe Request frames. */ int (*hapd_get_ssid)(void *priv, u8 *buf, int len); /** * hapd_set_ssid - Set SSID (AP only) * @priv: Private driver interface data * @buf: SSID * @len: Length of the SSID in octets * Returns: 0 on success, -1 on failure * * DEPRECATED - use set_ap() instead */ int (*hapd_set_ssid)(void *priv, const u8 *buf, int len); /** * hapd_set_countermeasures - Enable/disable TKIP countermeasures (AP) * @priv: Private driver interface data * @enabled: 1 = countermeasures enabled, 0 = disabled * Returns: 0 on success, -1 on failure * * This need not be implemented if the driver does not take care of * association processing. */ int (*hapd_set_countermeasures)(void *priv, int enabled); /** * sta_add - Add a station entry * @priv: Private driver interface data * @params: Station parameters * Returns: 0 on success, -1 on failure * * This function is used to add or set (params->set 1) a station * entry in the driver. Adding STA entries is used only if the driver * does not take care of association processing. * * With drivers that don't support full AP client state, this function * is used to add a station entry to the driver once the station has * completed association. * * With TDLS, this function is used to add or set (params->set 1) * TDLS peer entries (even with drivers that do not support full AP * client state). */ int (*sta_add)(void *priv, struct hostapd_sta_add_params *params); /** * get_inact_sec - Get station inactivity duration (AP only) * @priv: Private driver interface data * @addr: Station address * Returns: Number of seconds station has been inactive, -1 on failure */ int (*get_inact_sec)(void *priv, const u8 *addr); /** * sta_clear_stats - Clear station statistics (AP only) * @priv: Private driver interface data * @addr: Station address * Returns: 0 on success, -1 on failure */ int (*sta_clear_stats)(void *priv, const u8 *addr); /** * set_freq - Set channel/frequency (AP only) * @priv: Private driver interface data * @freq: Channel parameters * Returns: 0 on success, -1 on failure */ int (*set_freq)(void *priv, struct hostapd_freq_params *freq); /** * set_rts - Set RTS threshold * @priv: Private driver interface data * @rts: RTS threshold in octets * Returns: 0 on success, -1 on failure */ int (*set_rts)(void *priv, int rts); /** * set_frag - Set fragmentation threshold * @priv: Private driver interface data * @frag: Fragmentation threshold in octets * Returns: 0 on success, -1 on failure */ int (*set_frag)(void *priv, int frag); /** * sta_set_flags - Set station flags (AP only) * @priv: Private driver interface data * @addr: Station address * @total_flags: Bitmap of all WPA_STA_* flags currently set * @flags_or: Bitmap of WPA_STA_* flags to add * @flags_and: Bitmap of WPA_STA_* flags to us as a mask * Returns: 0 on success, -1 on failure */ int (*sta_set_flags)(void *priv, const u8 *addr, unsigned int total_flags, unsigned int flags_or, unsigned int flags_and); /** * sta_set_airtime_weight - Set station airtime weight (AP only) * @priv: Private driver interface data * @addr: Station address * @weight: New weight for station airtime assignment * Returns: 0 on success, -1 on failure */ int (*sta_set_airtime_weight)(void *priv, const u8 *addr, unsigned int weight); /** * set_tx_queue_params - Set TX queue parameters * @priv: Private driver interface data * @queue: Queue number (0 = VO, 1 = VI, 2 = BE, 3 = BK) * @aifs: AIFS * @cw_min: cwMin * @cw_max: cwMax * @burst_time: Maximum length for bursting in 0.1 msec units */ int (*set_tx_queue_params)(void *priv, int queue, int aifs, int cw_min, int cw_max, int burst_time); /** * if_add - Add a virtual interface * @priv: Private driver interface data * @type: Interface type * @ifname: Interface name for the new virtual interface * @addr: Local address to use for the interface or %NULL to use the * parent interface address * @bss_ctx: BSS context for %WPA_IF_AP_BSS interfaces * @drv_priv: Pointer for overwriting the driver context or %NULL if * not allowed (applies only to %WPA_IF_AP_BSS type) * @force_ifname: Buffer for returning an interface name that the * driver ended up using if it differs from the requested ifname * @if_addr: Buffer for returning the allocated interface address * (this may differ from the requested addr if the driver cannot * change interface address) * @bridge: Bridge interface to use or %NULL if no bridge configured * @use_existing: Whether to allow existing interface to be used * @setup_ap: Whether to setup AP for %WPA_IF_AP_BSS interfaces * Returns: 0 on success, -1 on failure */ int (*if_add)(void *priv, enum wpa_driver_if_type type, const char *ifname, const u8 *addr, void *bss_ctx, void **drv_priv, char *force_ifname, u8 *if_addr, const char *bridge, int use_existing, int setup_ap); /** * if_remove - Remove a virtual interface * @priv: Private driver interface data * @type: Interface type * @ifname: Interface name of the virtual interface to be removed * Returns: 0 on success, -1 on failure */ int (*if_remove)(void *priv, enum wpa_driver_if_type type, const char *ifname); /** * set_sta_vlan - Bind a station into a specific interface (AP only) * @priv: Private driver interface data * @ifname: Interface (main or virtual BSS or VLAN) * @addr: MAC address of the associated station * @vlan_id: VLAN ID * Returns: 0 on success, -1 on failure * * This function is used to bind a station to a specific virtual * interface. It is only used if when virtual interfaces are supported, * e.g., to assign stations to different VLAN interfaces based on * information from a RADIUS server. This allows separate broadcast * domains to be used with a single BSS. */ int (*set_sta_vlan)(void *priv, const u8 *addr, const char *ifname, int vlan_id); /** * commit - Optional commit changes handler (AP only) * @priv: driver private data * Returns: 0 on success, -1 on failure * * This optional handler function can be registered if the driver * interface implementation needs to commit changes (e.g., by setting * network interface up) at the end of initial configuration. If set, * this handler will be called after initial setup has been completed. */ int (*commit)(void *priv); /** * send_ether - Send an ethernet packet (AP only) * @priv: private driver interface data * @dst: Destination MAC address * @src: Source MAC address * @proto: Ethertype * @data: EAPOL packet starting with IEEE 802.1X header * @data_len: Length of the EAPOL packet in octets * Returns: 0 on success, -1 on failure */ int (*send_ether)(void *priv, const u8 *dst, const u8 *src, u16 proto, const u8 *data, size_t data_len); /** * set_radius_acl_auth - Notification of RADIUS ACL change * @priv: Private driver interface data * @mac: MAC address of the station * @accepted: Whether the station was accepted * @session_timeout: Session timeout for the station * Returns: 0 on success, -1 on failure */ int (*set_radius_acl_auth)(void *priv, const u8 *mac, int accepted, u32 session_timeout); /** * set_radius_acl_expire - Notification of RADIUS ACL expiration * @priv: Private driver interface data * @mac: MAC address of the station * Returns: 0 on success, -1 on failure */ int (*set_radius_acl_expire)(void *priv, const u8 *mac); /** * set_ap_wps_ie - Add WPS IE(s) into Beacon/Probe Response frames (AP) * @priv: Private driver interface data * @beacon: WPS IE(s) for Beacon frames or %NULL to remove extra IE(s) * @proberesp: WPS IE(s) for Probe Response frames or %NULL to remove * extra IE(s) * @assocresp: WPS IE(s) for (Re)Association Response frames or %NULL * to remove extra IE(s) * Returns: 0 on success, -1 on failure * * This is an optional function to add WPS IE in the kernel driver for * Beacon and Probe Response frames. This can be left undefined (set * to %NULL) if the driver uses the Beacon template from set_ap() * and does not process Probe Request frames. If the driver takes care * of (Re)Association frame processing, the assocresp buffer includes * WPS IE(s) that need to be added to (Re)Association Response frames * whenever a (Re)Association Request frame indicated use of WPS. * * This will also be used to add P2P IE(s) into Beacon/Probe Response * frames when operating as a GO. The driver is responsible for adding * timing related attributes (e.g., NoA) in addition to the IEs * included here by appending them after these buffers. This call is * also used to provide Probe Response IEs for P2P Listen state * operations for drivers that generate the Probe Response frames * internally. * * DEPRECATED - use set_ap() instead */ int (*set_ap_wps_ie)(void *priv, const struct wpabuf *beacon, const struct wpabuf *proberesp, const struct wpabuf *assocresp); /** * set_supp_port - Set IEEE 802.1X Supplicant Port status * @priv: Private driver interface data * @authorized: Whether the port is authorized * Returns: 0 on success, -1 on failure */ int (*set_supp_port)(void *priv, int authorized); /** * set_wds_sta - Bind a station into a 4-address WDS (AP only) * @priv: Private driver interface data * @addr: MAC address of the associated station * @aid: Association ID * @val: 1 = bind to 4-address WDS; 0 = unbind * @bridge_ifname: Bridge interface to use for the WDS station or %NULL * to indicate that bridge is not to be used * @ifname_wds: Buffer to return the interface name for the new WDS * station or %NULL to indicate name is not returned. * Returns: 0 on success, -1 on failure */ int (*set_wds_sta)(void *priv, const u8 *addr, int aid, int val, const char *bridge_ifname, char *ifname_wds); /** * send_action - Transmit an Action frame * @priv: Private driver interface data * @freq: Frequency (in MHz) of the channel * @wait: Time to wait off-channel for a response (in ms), or zero * @dst: Destination MAC address (Address 1) * @src: Source MAC address (Address 2) * @bssid: BSSID (Address 3) * @data: Frame body * @data_len: data length in octets @ @no_cck: Whether CCK rates must not be used to transmit this frame * Returns: 0 on success, -1 on failure * * This command can be used to request the driver to transmit an action * frame to the specified destination. * * If the %WPA_DRIVER_FLAGS_OFFCHANNEL_TX flag is set, the frame will * be transmitted on the given channel and the device will wait for a * response on that channel for the given wait time. * * If the flag is not set, the wait time will be ignored. In this case, * if a remain-on-channel duration is in progress, the frame must be * transmitted on that channel; alternatively the frame may be sent on * the current operational channel (if in associated state in station * mode or while operating as an AP.) * * If @src differs from the device MAC address, use of a random * transmitter address is requested for this message exchange. */ int (*send_action)(void *priv, unsigned int freq, unsigned int wait, const u8 *dst, const u8 *src, const u8 *bssid, const u8 *data, size_t data_len, int no_cck); /** * send_action_cancel_wait - Cancel action frame TX wait * @priv: Private driver interface data * * This command cancels the wait time associated with sending an action * frame. It is only available when %WPA_DRIVER_FLAGS_OFFCHANNEL_TX is * set in the driver flags. */ void (*send_action_cancel_wait)(void *priv); /** * remain_on_channel - Remain awake on a channel * @priv: Private driver interface data * @freq: Frequency (in MHz) of the channel * @duration: Duration in milliseconds * Returns: 0 on success, -1 on failure * * This command is used to request the driver to remain awake on the * specified channel for the specified duration and report received * Action frames with EVENT_RX_MGMT events. Optionally, received * Probe Request frames may also be requested to be reported by calling * probe_req_report(). These will be reported with EVENT_RX_PROBE_REQ. * * The driver may not be at the requested channel when this function * returns, i.e., the return code is only indicating whether the * request was accepted. The caller will need to wait until the * EVENT_REMAIN_ON_CHANNEL event indicates that the driver has * completed the channel change. This may take some time due to other * need for the radio and the caller should be prepared to timing out * its wait since there are no guarantees on when this request can be * executed. */ int (*remain_on_channel)(void *priv, unsigned int freq, unsigned int duration); /** * cancel_remain_on_channel - Cancel remain-on-channel operation * @priv: Private driver interface data * * This command can be used to cancel a remain-on-channel operation * before its originally requested duration has passed. This could be * used, e.g., when remain_on_channel() is used to request extra time * to receive a response to an Action frame and the response is * received when there is still unneeded time remaining on the * remain-on-channel operation. */ int (*cancel_remain_on_channel)(void *priv); /** * probe_req_report - Request Probe Request frames to be indicated * @priv: Private driver interface data * @report: Whether to report received Probe Request frames * Returns: 0 on success, -1 on failure (or if not supported) * * This command can be used to request the driver to indicate when * Probe Request frames are received with EVENT_RX_PROBE_REQ events. * Since this operation may require extra resources, e.g., due to less * optimal hardware/firmware RX filtering, many drivers may disable * Probe Request reporting at least in station mode. This command is * used to notify the driver when the Probe Request frames need to be * reported, e.g., during remain-on-channel operations. */ int (*probe_req_report)(void *priv, int report); /** * deinit_ap - Deinitialize AP mode * @priv: Private driver interface data * Returns: 0 on success, -1 on failure (or if not supported) * * This optional function can be used to disable AP mode related * configuration. If the interface was not dynamically added, * change the driver mode to station mode to allow normal station * operations like scanning to be completed. */ int (*deinit_ap)(void *priv); /** * deinit_p2p_cli - Deinitialize P2P client mode * @priv: Private driver interface data * Returns: 0 on success, -1 on failure (or if not supported) * * This optional function can be used to disable P2P client mode. If the * interface was not dynamically added, change the interface type back * to station mode. */ int (*deinit_p2p_cli)(void *priv); /** * suspend - Notification on system suspend/hibernate event * @priv: Private driver interface data */ void (*suspend)(void *priv); /** * resume - Notification on system resume/thaw event * @priv: Private driver interface data */ void (*resume)(void *priv); /** * signal_monitor - Set signal monitoring parameters * @priv: Private driver interface data * @threshold: Threshold value for signal change events; 0 = disabled * @hysteresis: Minimum change in signal strength before indicating a * new event * Returns: 0 on success, -1 on failure (or if not supported) * * This function can be used to configure monitoring of signal strength * with the current AP. Whenever signal strength drops below the * %threshold value or increases above it, EVENT_SIGNAL_CHANGE event * should be generated assuming the signal strength has changed at * least %hysteresis from the previously indicated signal change event. */ int (*signal_monitor)(void *priv, int threshold, int hysteresis); /** * get_noa - Get current Notice of Absence attribute payload * @priv: Private driver interface data * @buf: Buffer for returning NoA * @buf_len: Buffer length in octets * Returns: Number of octets used in buf, 0 to indicate no NoA is being * advertized, or -1 on failure * * This function is used to fetch the current Notice of Absence * attribute value from GO. */ int (*get_noa)(void *priv, u8 *buf, size_t buf_len); /** * set_noa - Set Notice of Absence parameters for GO (testing) * @priv: Private driver interface data * @count: Count * @start: Start time in ms from next TBTT * @duration: Duration in ms * Returns: 0 on success or -1 on failure * * This function is used to set Notice of Absence parameters for GO. It * is used only for testing. To disable NoA, all parameters are set to * 0. */ int (*set_noa)(void *priv, u8 count, int start, int duration); /** * set_p2p_powersave - Set P2P power save options * @priv: Private driver interface data * @legacy_ps: 0 = disable, 1 = enable, 2 = maximum PS, -1 = no change * @opp_ps: 0 = disable, 1 = enable, -1 = no change * @ctwindow: 0.. = change (msec), -1 = no change * Returns: 0 on success or -1 on failure */ int (*set_p2p_powersave)(void *priv, int legacy_ps, int opp_ps, int ctwindow); /** * ampdu - Enable/disable aggregation * @priv: Private driver interface data * @ampdu: 1/0 = enable/disable A-MPDU aggregation * Returns: 0 on success or -1 on failure */ int (*ampdu)(void *priv, int ampdu); /** * get_radio_name - Get physical radio name for the device * @priv: Private driver interface data * Returns: Radio name or %NULL if not known * * The returned data must not be modified by the caller. It is assumed * that any interface that has the same radio name as another is * sharing the same physical radio. This information can be used to * share scan results etc. information between the virtual interfaces * to speed up various operations. */ const char * (*get_radio_name)(void *priv); /** * send_tdls_mgmt - for sending TDLS management packets * @priv: private driver interface data * @dst: Destination (peer) MAC address * @action_code: TDLS action code for the mssage * @dialog_token: Dialog Token to use in the message (if needed) * @status_code: Status Code or Reason Code to use (if needed) * @peer_capab: TDLS peer capability (TDLS_PEER_* bitfield) * @initiator: Is the current end the TDLS link initiator * @buf: TDLS IEs to add to the message * @len: Length of buf in octets * Returns: 0 on success, negative (<0) on failure * * This optional function can be used to send packet to driver which is * responsible for receiving and sending all TDLS packets. */ int (*send_tdls_mgmt)(void *priv, const u8 *dst, u8 action_code, u8 dialog_token, u16 status_code, u32 peer_capab, int initiator, const u8 *buf, size_t len); /** * tdls_oper - Ask the driver to perform high-level TDLS operations * @priv: Private driver interface data * @oper: TDLS high-level operation. See %enum tdls_oper * @peer: Destination (peer) MAC address * Returns: 0 on success, negative (<0) on failure * * This optional function can be used to send high-level TDLS commands * to the driver. */ int (*tdls_oper)(void *priv, enum tdls_oper oper, const u8 *peer); /** * wnm_oper - Notify driver of the WNM frame reception * @priv: Private driver interface data * @oper: WNM operation. See %enum wnm_oper * @peer: Destination (peer) MAC address * @buf: Buffer for the driver to fill in (for getting IE) * @buf_len: Return the len of buf * Returns: 0 on success, negative (<0) on failure */ int (*wnm_oper)(void *priv, enum wnm_oper oper, const u8 *peer, u8 *buf, u16 *buf_len); /** * set_qos_map - Set QoS Map * @priv: Private driver interface data * @qos_map_set: QoS Map * @qos_map_set_len: Length of QoS Map */ int (*set_qos_map)(void *priv, const u8 *qos_map_set, u8 qos_map_set_len); /** * br_add_ip_neigh - Add a neigh to the bridge ip neigh table * @priv: Private driver interface data * @version: IP version of the IP address, 4 or 6 * @ipaddr: IP address for the neigh entry * @prefixlen: IP address prefix length * @addr: Corresponding MAC address * Returns: 0 on success, negative (<0) on failure */ int (*br_add_ip_neigh)(void *priv, u8 version, const u8 *ipaddr, int prefixlen, const u8 *addr); /** * br_delete_ip_neigh - Remove a neigh from the bridge ip neigh table * @priv: Private driver interface data * @version: IP version of the IP address, 4 or 6 * @ipaddr: IP address for the neigh entry * Returns: 0 on success, negative (<0) on failure */ int (*br_delete_ip_neigh)(void *priv, u8 version, const u8 *ipaddr); /** * br_port_set_attr - Set a bridge port attribute * @attr: Bridge port attribute to set * @val: Value to be set * Returns: 0 on success, negative (<0) on failure */ int (*br_port_set_attr)(void *priv, enum drv_br_port_attr attr, unsigned int val); /** * br_port_set_attr - Set a bridge network parameter * @param: Bridge parameter to set * @val: Value to be set * Returns: 0 on success, negative (<0) on failure */ int (*br_set_net_param)(void *priv, enum drv_br_net_param param, unsigned int val); /** * get_wowlan - Get wake-on-wireless status * @priv: Private driver interface data */ int (*get_wowlan)(void *priv); /** * set_wowlan - Set wake-on-wireless triggers * @priv: Private driver interface data * @triggers: wowlan triggers */ int (*set_wowlan)(void *priv, const struct wowlan_triggers *triggers); /** * signal_poll - Get current connection information * @priv: Private driver interface data * @signal_info: Connection info structure */ int (*signal_poll)(void *priv, struct wpa_signal_info *signal_info); /** * channel_info - Get parameters of the current operating channel * @priv: Private driver interface data * @channel_info: Channel info structure * Returns: 0 on success, negative (<0) on failure */ int (*channel_info)(void *priv, struct wpa_channel_info *channel_info); /** * set_authmode - Set authentication algorithm(s) for static WEP * @priv: Private driver interface data * @authmode: 1=Open System, 2=Shared Key, 3=both * Returns: 0 on success, -1 on failure * * This function can be used to set authentication algorithms for AP * mode when static WEP is used. If the driver uses user space MLME/SME * implementation, there is no need to implement this function. * * DEPRECATED - use set_ap() instead */ int (*set_authmode)(void *priv, int authmode); #ifdef ANDROID /** * driver_cmd - Execute driver-specific command * @priv: Private driver interface data * @cmd: Command to execute * @buf: Return buffer * @buf_len: Buffer length * Returns: 0 on success, -1 on failure */ int (*driver_cmd)(void *priv, char *cmd, char *buf, size_t buf_len); #endif /* ANDROID */ /** * vendor_cmd - Execute vendor specific command * @priv: Private driver interface data * @vendor_id: Vendor id * @subcmd: Vendor command id * @data: Vendor command parameters (%NULL if no parameters) * @data_len: Data length * @buf: Return buffer (%NULL to ignore reply) * Returns: 0 on success, negative (<0) on failure * * This function handles vendor specific commands that are passed to * the driver/device. The command is identified by vendor id and * command id. Parameters can be passed as argument to the command * in the data buffer. Reply (if any) will be filled in the supplied * return buffer. * * The exact driver behavior is driver interface and vendor specific. As * an example, this will be converted to a vendor specific cfg80211 * command in case of the nl80211 driver interface. */ int (*vendor_cmd)(void *priv, unsigned int vendor_id, unsigned int subcmd, const u8 *data, size_t data_len, struct wpabuf *buf); /** * set_rekey_info - Set rekey information * @priv: Private driver interface data * @kek: Current KEK * @kek_len: KEK length in octets * @kck: Current KCK * @kck_len: KCK length in octets * @replay_ctr: Current EAPOL-Key Replay Counter * * This optional function can be used to provide information for the * driver/firmware to process EAPOL-Key frames in Group Key Handshake * while the host (including wpa_supplicant) is sleeping. */ void (*set_rekey_info)(void *priv, const u8 *kek, size_t kek_len, const u8 *kck, size_t kck_len, const u8 *replay_ctr); /** * sta_assoc - Station association indication * @priv: Private driver interface data * @own_addr: Source address and BSSID for association frame * @addr: MAC address of the station to associate * @reassoc: flag to indicate re-association * @status: association response status code * @ie: assoc response ie buffer * @len: ie buffer length * Returns: 0 on success, -1 on failure * * This function indicates the driver to send (Re)Association * Response frame to the station. */ int (*sta_assoc)(void *priv, const u8 *own_addr, const u8 *addr, int reassoc, u16 status, const u8 *ie, size_t len); /** * sta_auth - Station authentication indication * @priv: private driver interface data * @params: Station authentication parameters * * Returns: 0 on success, -1 on failure */ int (*sta_auth)(void *priv, struct wpa_driver_sta_auth_params *params); /** * add_tspec - Add traffic stream * @priv: Private driver interface data * @addr: MAC address of the station to associate * @tspec_ie: tspec ie buffer * @tspec_ielen: tspec ie length * Returns: 0 on success, -1 on failure * * This function adds the traffic steam for the station * and fills the medium_time in tspec_ie. */ int (*add_tspec)(void *priv, const u8 *addr, u8 *tspec_ie, size_t tspec_ielen); /** * add_sta_node - Add a station node in the driver * @priv: Private driver interface data * @addr: MAC address of the station to add * @auth_alg: authentication algorithm used by the station * Returns: 0 on success, -1 on failure * * This function adds the station node in the driver, when * the station gets added by FT-over-DS. */ int (*add_sta_node)(void *priv, const u8 *addr, u16 auth_alg); /** * sched_scan - Request the driver to initiate scheduled scan * @priv: Private driver interface data * @params: Scan parameters * Returns: 0 on success, -1 on failure * * This operation should be used for scheduled scan offload to * the hardware. Every time scan results are available, the * driver should report scan results event for wpa_supplicant * which will eventually request the results with * wpa_driver_get_scan_results2(). This operation is optional * and if not provided or if it returns -1, we fall back to * normal host-scheduled scans. */ int (*sched_scan)(void *priv, struct wpa_driver_scan_params *params); /** * stop_sched_scan - Request the driver to stop a scheduled scan * @priv: Private driver interface data * Returns: 0 on success, -1 on failure * * This should cause the scheduled scan to be stopped and * results should stop being sent. Must be supported if * sched_scan is supported. */ int (*stop_sched_scan)(void *priv); /** * poll_client - Probe (null data or such) the given station * @priv: Private driver interface data * @own_addr: MAC address of sending interface * @addr: MAC address of the station to probe * @qos: Indicates whether station is QoS station * * This function is used to verify whether an associated station is * still present. This function does not need to be implemented if the * driver provides such inactivity polling mechanism. */ void (*poll_client)(void *priv, const u8 *own_addr, const u8 *addr, int qos); /** * radio_disable - Disable/enable radio * @priv: Private driver interface data * @disabled: 1=disable 0=enable radio * Returns: 0 on success, -1 on failure * * This optional command is for testing purposes. It can be used to * disable the radio on a testbed device to simulate out-of-radio-range * conditions. */ int (*radio_disable)(void *priv, int disabled); /** * switch_channel - Announce channel switch and migrate the GO to the * given frequency * @priv: Private driver interface data * @settings: Settings for CSA period and new channel * Returns: 0 on success, -1 on failure * * This function is used to move the GO to the legacy STA channel to * avoid frequency conflict in single channel concurrency. */ int (*switch_channel)(void *priv, struct csa_settings *settings); /** * add_tx_ts - Add traffic stream * @priv: Private driver interface data * @tsid: Traffic stream ID * @addr: Receiver address * @user_prio: User priority of the traffic stream * @admitted_time: Admitted time for this TS in units of * 32 microsecond periods (per second). * Returns: 0 on success, -1 on failure */ int (*add_tx_ts)(void *priv, u8 tsid, const u8 *addr, u8 user_prio, u16 admitted_time); /** * del_tx_ts - Delete traffic stream * @priv: Private driver interface data * @tsid: Traffic stream ID * @addr: Receiver address * Returns: 0 on success, -1 on failure */ int (*del_tx_ts)(void *priv, u8 tsid, const u8 *addr); /** * Enable channel-switching with TDLS peer * @priv: Private driver interface data * @addr: MAC address of the TDLS peer * @oper_class: Operating class of the switch channel * @params: Channel specification * Returns: 0 on success, -1 on failure * * The function indicates to driver that it can start switching to a * different channel with a specified TDLS peer. The switching is * assumed on until canceled with tdls_disable_channel_switch(). */ int (*tdls_enable_channel_switch)( void *priv, const u8 *addr, u8 oper_class, const struct hostapd_freq_params *params); /** * Disable channel switching with TDLS peer * @priv: Private driver interface data * @addr: MAC address of the TDLS peer * Returns: 0 on success, -1 on failure * * This function indicates to the driver that it should stop switching * with a given TDLS peer. */ int (*tdls_disable_channel_switch)(void *priv, const u8 *addr); /** * start_dfs_cac - Listen for radar interference on the channel * @priv: Private driver interface data * @freq: Channel parameters * Returns: 0 on success, -1 on failure */ int (*start_dfs_cac)(void *priv, struct hostapd_freq_params *freq); /** * stop_ap - Removes beacon from AP * @priv: Private driver interface data * Returns: 0 on success, -1 on failure (or if not supported) * * This optional function can be used to disable AP mode related * configuration. Unlike deinit_ap, it does not change to station * mode. */ int (*stop_ap)(void *priv); /** * get_survey - Retrieve survey data * @priv: Private driver interface data * @freq: If set, survey data for the specified frequency is only * being requested. If not set, all survey data is requested. * Returns: 0 on success, -1 on failure * * Use this to retrieve: * * - the observed channel noise floor * - the amount of time we have spent on the channel * - the amount of time during which we have spent on the channel that * the radio has determined the medium is busy and we cannot * transmit * - the amount of time we have spent receiving data * - the amount of time we have spent transmitting data * * This data can be used for spectrum heuristics. One example is * Automatic Channel Selection (ACS). The channel survey data is * kept on a linked list on the channel data, one entry is added * for each survey. The min_nf of the channel is updated for each * survey. */ int (*get_survey)(void *priv, unsigned int freq); /** * status - Get driver interface status information * @priv: Private driver interface data * @buf: Buffer for printing the status information * @buflen: Maximum length of the buffer * Returns: Length of written status information or -1 on failure */ int (*status)(void *priv, char *buf, size_t buflen); /** * roaming - Set roaming policy for driver-based BSS selection * @priv: Private driver interface data * @allowed: Whether roaming within ESS is allowed * @bssid: Forced BSSID if roaming is disabled or %NULL if not set * Returns: Length of written status information or -1 on failure * * This optional callback can be used to update roaming policy from the * associate() command (bssid being set there indicates that the driver * should not roam before getting this roaming() call to allow roaming. * If the driver does not indicate WPA_DRIVER_FLAGS_BSS_SELECTION * capability, roaming policy is handled within wpa_supplicant and there * is no need to implement or react to this callback. */ int (*roaming)(void *priv, int allowed, const u8 *bssid); /** * disable_fils - Enable/disable FILS feature * @priv: Private driver interface data * @disable: 0-enable and 1-disable FILS feature * Returns: 0 on success, -1 on failure * * This callback can be used to configure driver and below layers to * enable/disable all FILS features. */ int (*disable_fils)(void *priv, int disable); /** * set_mac_addr - Set MAC address * @priv: Private driver interface data * @addr: MAC address to use or %NULL for setting back to permanent * Returns: 0 on success, -1 on failure */ int (*set_mac_addr)(void *priv, const u8 *addr); #ifdef CONFIG_MACSEC int (*macsec_init)(void *priv, struct macsec_init_params *params); int (*macsec_deinit)(void *priv); /** * macsec_get_capability - Inform MKA of this driver's capability * @priv: Private driver interface data * @cap: Driver's capability * Returns: 0 on success, -1 on failure */ int (*macsec_get_capability)(void *priv, enum macsec_cap *cap); /** * enable_protect_frames - Set protect frames status * @priv: Private driver interface data * @enabled: TRUE = protect frames enabled * FALSE = protect frames disabled * Returns: 0 on success, -1 on failure (or if not supported) */ int (*enable_protect_frames)(void *priv, Boolean enabled); /** * enable_encrypt - Set encryption status * @priv: Private driver interface data * @enabled: TRUE = encrypt outgoing traffic * FALSE = integrity-only protection on outgoing traffic * Returns: 0 on success, -1 on failure (or if not supported) */ int (*enable_encrypt)(void *priv, Boolean enabled); /** * set_replay_protect - Set replay protect status and window size * @priv: Private driver interface data * @enabled: TRUE = replay protect enabled * FALSE = replay protect disabled * @window: replay window size, valid only when replay protect enabled * Returns: 0 on success, -1 on failure (or if not supported) */ int (*set_replay_protect)(void *priv, Boolean enabled, u32 window); /** * set_current_cipher_suite - Set current cipher suite * @priv: Private driver interface data * @cs: EUI64 identifier * Returns: 0 on success, -1 on failure (or if not supported) */ int (*set_current_cipher_suite)(void *priv, u64 cs); /** * enable_controlled_port - Set controlled port status * @priv: Private driver interface data * @enabled: TRUE = controlled port enabled * FALSE = controlled port disabled * Returns: 0 on success, -1 on failure (or if not supported) */ int (*enable_controlled_port)(void *priv, Boolean enabled); /** * get_receive_lowest_pn - Get receive lowest pn * @priv: Private driver interface data * @sa: secure association * Returns: 0 on success, -1 on failure (or if not supported) */ int (*get_receive_lowest_pn)(void *priv, struct receive_sa *sa); /** * get_transmit_next_pn - Get transmit next pn * @priv: Private driver interface data * @sa: secure association * Returns: 0 on success, -1 on failure (or if not supported) */ int (*get_transmit_next_pn)(void *priv, struct transmit_sa *sa); /** * set_transmit_next_pn - Set transmit next pn * @priv: Private driver interface data * @sa: secure association * Returns: 0 on success, -1 on failure (or if not supported) */ int (*set_transmit_next_pn)(void *priv, struct transmit_sa *sa); /** * set_receive_lowest_pn - Set receive lowest PN * @priv: Private driver interface data * @sa: secure association * Returns: 0 on success, -1 on failure (or if not supported) */ int (*set_receive_lowest_pn)(void *priv, struct receive_sa *sa); /** * create_receive_sc - create secure channel for receiving * @priv: Private driver interface data * @sc: secure channel * @conf_offset: confidentiality offset (0, 30, or 50) * @validation: frame validation policy (0 = Disabled, 1 = Checked, * 2 = Strict) * Returns: 0 on success, -1 on failure (or if not supported) */ int (*create_receive_sc)(void *priv, struct receive_sc *sc, unsigned int conf_offset, int validation); /** * delete_receive_sc - delete secure connection for receiving * @priv: private driver interface data from init() * @sc: secure channel * Returns: 0 on success, -1 on failure */ int (*delete_receive_sc)(void *priv, struct receive_sc *sc); /** * create_receive_sa - create secure association for receive * @priv: private driver interface data from init() * @sa: secure association * Returns: 0 on success, -1 on failure */ int (*create_receive_sa)(void *priv, struct receive_sa *sa); /** * delete_receive_sa - Delete secure association for receive * @priv: Private driver interface data from init() * @sa: Secure association * Returns: 0 on success, -1 on failure */ int (*delete_receive_sa)(void *priv, struct receive_sa *sa); /** * enable_receive_sa - enable the SA for receive * @priv: private driver interface data from init() * @sa: secure association * Returns: 0 on success, -1 on failure */ int (*enable_receive_sa)(void *priv, struct receive_sa *sa); /** * disable_receive_sa - disable SA for receive * @priv: private driver interface data from init() * @sa: secure association * Returns: 0 on success, -1 on failure */ int (*disable_receive_sa)(void *priv, struct receive_sa *sa); /** * create_transmit_sc - create secure connection for transmit * @priv: private driver interface data from init() * @sc: secure channel * @conf_offset: confidentiality offset (0, 30, or 50) * Returns: 0 on success, -1 on failure */ int (*create_transmit_sc)(void *priv, struct transmit_sc *sc, unsigned int conf_offset); /** * delete_transmit_sc - delete secure connection for transmit * @priv: private driver interface data from init() * @sc: secure channel * Returns: 0 on success, -1 on failure */ int (*delete_transmit_sc)(void *priv, struct transmit_sc *sc); /** * create_transmit_sa - create secure association for transmit * @priv: private driver interface data from init() * @sa: secure association * Returns: 0 on success, -1 on failure */ int (*create_transmit_sa)(void *priv, struct transmit_sa *sa); /** * delete_transmit_sa - Delete secure association for transmit * @priv: Private driver interface data from init() * @sa: Secure association * Returns: 0 on success, -1 on failure */ int (*delete_transmit_sa)(void *priv, struct transmit_sa *sa); /** * enable_transmit_sa - enable SA for transmit * @priv: private driver interface data from init() * @sa: secure association * Returns: 0 on success, -1 on failure */ int (*enable_transmit_sa)(void *priv, struct transmit_sa *sa); /** * disable_transmit_sa - disable SA for transmit * @priv: private driver interface data from init() * @sa: secure association * Returns: 0 on success, -1 on failure */ int (*disable_transmit_sa)(void *priv, struct transmit_sa *sa); #endif /* CONFIG_MACSEC */ /** * init_mesh - Driver specific initialization for mesh * @priv: Private driver interface data * Returns: 0 on success, -1 on failure */ int (*init_mesh)(void *priv); /** * join_mesh - Join a mesh network * @priv: Private driver interface data * @params: Mesh configuration parameters * Returns: 0 on success, -1 on failure */ int (*join_mesh)(void *priv, struct wpa_driver_mesh_join_params *params); /** * leave_mesh - Leave a mesh network * @priv: Private driver interface data * Returns 0 on success, -1 on failure */ int (*leave_mesh)(void *priv); /** * probe_mesh_link - Inject a frame over direct mesh link to a given * peer skipping the next_hop lookup from mpath table. * @priv: Private driver interface data * @addr: Peer MAC address * @eth: Ethernet frame to be sent * @len: Ethernet frame lengtn in bytes * Returns 0 on success, -1 on failure */ int (*probe_mesh_link)(void *priv, const u8 *addr, const u8 *eth, size_t len); /** * do_acs - Automatically select channel * @priv: Private driver interface data * @params: Parameters for ACS * Returns 0 on success, -1 on failure * * This command can be used to offload ACS to the driver if the driver * indicates support for such offloading (WPA_DRIVER_FLAGS_ACS_OFFLOAD). */ int (*do_acs)(void *priv, struct drv_acs_params *params); /** * set_band - Notify driver of band selection * @priv: Private driver interface data * @band: The selected band(s) * Returns 0 on success, -1 on failure */ int (*set_band)(void *priv, enum set_band band); /** * get_pref_freq_list - Get preferred frequency list for an interface * @priv: Private driver interface data * @if_type: Interface type * @num: Number of channels * @freq_list: Preferred channel frequency list encoded in MHz values * Returns 0 on success, -1 on failure * * This command can be used to query the preferred frequency list from * the driver specific to a particular interface type. */ int (*get_pref_freq_list)(void *priv, enum wpa_driver_if_type if_type, unsigned int *num, unsigned int *freq_list); /** * set_prob_oper_freq - Indicate probable P2P operating channel * @priv: Private driver interface data * @freq: Channel frequency in MHz * Returns 0 on success, -1 on failure * * This command can be used to inform the driver of the operating * frequency that an ongoing P2P group formation is likely to come up * on. Local device is assuming P2P Client role. */ int (*set_prob_oper_freq)(void *priv, unsigned int freq); /** * abort_scan - Request the driver to abort an ongoing scan * @priv: Private driver interface data * @scan_cookie: Cookie identifying the scan request. This is used only * when the vendor interface QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN * was used to trigger scan. Otherwise, 0 is used. * Returns 0 on success, -1 on failure */ int (*abort_scan)(void *priv, u64 scan_cookie); /** * configure_data_frame_filters - Request to configure frame filters * @priv: Private driver interface data * @filter_flags: The type of frames to filter (bitfield of * WPA_DATA_FRAME_FILTER_FLAG_*) * Returns: 0 on success or -1 on failure */ int (*configure_data_frame_filters)(void *priv, u32 filter_flags); /** * get_ext_capab - Get extended capabilities for the specified interface * @priv: Private driver interface data * @type: Interface type for which to get extended capabilities * @ext_capab: Extended capabilities fetched * @ext_capab_mask: Extended capabilities mask * @ext_capab_len: Length of the extended capabilities * Returns: 0 on success or -1 on failure */ int (*get_ext_capab)(void *priv, enum wpa_driver_if_type type, const u8 **ext_capab, const u8 **ext_capab_mask, unsigned int *ext_capab_len); /** * p2p_lo_start - Start offloading P2P listen to device * @priv: Private driver interface data * @freq: Listening frequency (MHz) for P2P listen * @period: Length of the listen operation in milliseconds * @interval: Interval for running the listen operation in milliseconds * @count: Number of times to run the listen operation * @device_types: Device primary and secondary types * @dev_types_len: Number of bytes for device_types * @ies: P2P IE and WSC IE for Probe Response frames * @ies_len: Length of ies in bytes * Returns: 0 on success or -1 on failure */ int (*p2p_lo_start)(void *priv, unsigned int freq, unsigned int period, unsigned int interval, unsigned int count, const u8 *device_types, size_t dev_types_len, const u8 *ies, size_t ies_len); /** * p2p_lo_stop - Stop P2P listen offload * @priv: Private driver interface data * Returns: 0 on success or -1 on failure */ int (*p2p_lo_stop)(void *priv); /** * set_default_scan_ies - Set default scan IEs * @priv: Private driver interface data * @ies: Scan default IEs buffer * @ies_len: Length of IEs in bytes * Returns: 0 on success or -1 on failure * * The driver can use these by default when there are no scan IEs coming * in the subsequent scan requests. Also in case of one or more of IEs * given in set_default_scan_ies() are missing in the subsequent scan * request, the driver should merge the missing scan IEs in the scan * request from the IEs set by set_default_scan_ies() in the Probe * Request frames sent. */ int (*set_default_scan_ies)(void *priv, const u8 *ies, size_t ies_len); /** * set_tdls_mode - Set TDLS trigger mode to the host driver * @priv: Private driver interface data * @tdls_external_control: Represents if TDLS external trigger control * mode is enabled/disabled. * * This optional callback can be used to configure the TDLS external * trigger control mode to the host driver. */ int (*set_tdls_mode)(void *priv, int tdls_external_control); /** * get_bss_transition_status - Get candidate BSS's transition status * @priv: Private driver interface data * @params: Candidate BSS list * * Get the accept or reject reason code for a list of BSS transition * candidates. */ struct wpa_bss_candidate_info * (*get_bss_transition_status)(void *priv, struct wpa_bss_trans_info *params); /** * ignore_assoc_disallow - Configure driver to ignore assoc_disallow * @priv: Private driver interface data * @ignore_disallow: 0 to not ignore, 1 to ignore * Returns: 0 on success, -1 on failure */ int (*ignore_assoc_disallow)(void *priv, int ignore_disallow); /** * set_bssid_blacklist - Set blacklist of BSSIDs to the driver * @priv: Private driver interface data * @num_bssid: Number of blacklist BSSIDs * @bssids: List of blacklisted BSSIDs */ int (*set_bssid_blacklist)(void *priv, unsigned int num_bssid, const u8 *bssid); /** * update_connect_params - Update the connection parameters * @priv: Private driver interface data * @params: Association parameters * @mask: Bit mask indicating which parameters in @params have to be * updated * Returns: 0 on success, -1 on failure * * Update the connection parameters when in connected state so that the * driver uses the updated parameters for subsequent roaming. This is * used only with drivers that implement internal BSS selection and * roaming. */ int (*update_connect_params)( void *priv, struct wpa_driver_associate_params *params, enum wpa_drv_update_connect_params_mask mask); /** * send_external_auth_status - Indicate the status of external * authentication processing to the host driver. * @priv: Private driver interface data * @params: Status of authentication processing. * Returns: 0 on success, -1 on failure */ int (*send_external_auth_status)(void *priv, struct external_auth *params); /** * set_4addr_mode - Set 4-address mode * @priv: Private driver interface data * @bridge_ifname: Bridge interface name * @val: 0 - disable 4addr mode, 1 - enable 4addr mode * Returns: 0 on success, < 0 on failure */ int (*set_4addr_mode)(void *priv, const char *bridge_ifname, int val); /** * update_dh_ie - Update DH IE * @priv: Private driver interface data * @peer_mac: Peer MAC address * @reason_code: Reacon code * @ie: DH IE * @ie_len: DH IE length in bytes * Returns: 0 on success, -1 on failure * * This callback is used to let the driver know the DH processing result * and DH IE for a pending association. */ int (*update_dh_ie)(void *priv, const u8 *peer_mac, u16 reason_code, const u8 *ie, size_t ie_len); }; /** * enum wpa_event_type - Event type for wpa_supplicant_event() calls */ enum wpa_event_type { /** * EVENT_ASSOC - Association completed * * This event needs to be delivered when the driver completes IEEE * 802.11 association or reassociation successfully. * wpa_driver_ops::get_bssid() is expected to provide the current BSSID * after this event has been generated. In addition, optional * EVENT_ASSOCINFO may be generated just before EVENT_ASSOC to provide * more information about the association. If the driver interface gets * both of these events at the same time, it can also include the * assoc_info data in EVENT_ASSOC call. */ EVENT_ASSOC, /** * EVENT_DISASSOC - Association lost * * This event should be called when association is lost either due to * receiving deauthenticate or disassociate frame from the AP or when * sending either of these frames to the current AP. If the driver * supports separate deauthentication event, EVENT_DISASSOC should only * be used for disassociation and EVENT_DEAUTH for deauthentication. * In AP mode, union wpa_event_data::disassoc_info is required. */ EVENT_DISASSOC, /** * EVENT_MICHAEL_MIC_FAILURE - Michael MIC (TKIP) detected * * This event must be delivered when a Michael MIC error is detected by * the local driver. Additional data for event processing is * provided with union wpa_event_data::michael_mic_failure. This * information is used to request new encyption key and to initiate * TKIP countermeasures if needed. */ EVENT_MICHAEL_MIC_FAILURE, /** * EVENT_SCAN_RESULTS - Scan results available * * This event must be called whenever scan results are available to be * fetched with struct wpa_driver_ops::get_scan_results(). This event * is expected to be used some time after struct wpa_driver_ops::scan() * is called. If the driver provides an unsolicited event when the scan * has been completed, this event can be used to trigger * EVENT_SCAN_RESULTS call. If such event is not available from the * driver, the driver wrapper code is expected to use a registered * timeout to generate EVENT_SCAN_RESULTS call after the time that the * scan is expected to be completed. Optional information about * completed scan can be provided with union wpa_event_data::scan_info. */ EVENT_SCAN_RESULTS, /** * EVENT_ASSOCINFO - Report optional extra information for association * * This event can be used to report extra association information for * EVENT_ASSOC processing. This extra information includes IEs from * association frames and Beacon/Probe Response frames in union * wpa_event_data::assoc_info. EVENT_ASSOCINFO must be send just before * EVENT_ASSOC. Alternatively, the driver interface can include * assoc_info data in the EVENT_ASSOC call if it has all the * information available at the same point. */ EVENT_ASSOCINFO, /** * EVENT_INTERFACE_STATUS - Report interface status changes * * This optional event can be used to report changes in interface * status (interface added/removed) using union * wpa_event_data::interface_status. This can be used to trigger * wpa_supplicant to stop and re-start processing for the interface, * e.g., when a cardbus card is ejected/inserted. */ EVENT_INTERFACE_STATUS, /** * EVENT_PMKID_CANDIDATE - Report a candidate AP for pre-authentication * * This event can be used to inform wpa_supplicant about candidates for * RSN (WPA2) pre-authentication. If wpa_supplicant is not responsible * for scan request (ap_scan=2 mode), this event is required for * pre-authentication. If wpa_supplicant is performing scan request * (ap_scan=1), this event is optional since scan results can be used * to add pre-authentication candidates. union * wpa_event_data::pmkid_candidate is used to report the BSSID of the * candidate and priority of the candidate, e.g., based on the signal * strength, in order to try to pre-authenticate first with candidates * that are most likely targets for re-association. * * EVENT_PMKID_CANDIDATE can be called whenever the driver has updates * on the candidate list. In addition, it can be called for the current * AP and APs that have existing PMKSA cache entries. wpa_supplicant * will automatically skip pre-authentication in cases where a valid * PMKSA exists. When more than one candidate exists, this event should * be generated once for each candidate. * * Driver will be notified about successful pre-authentication with * struct wpa_driver_ops::add_pmkid() calls. */ EVENT_PMKID_CANDIDATE, /** * EVENT_TDLS - Request TDLS operation * * This event can be used to request a TDLS operation to be performed. */ EVENT_TDLS, /** * EVENT_FT_RESPONSE - Report FT (IEEE 802.11r) response IEs * * The driver is expected to report the received FT IEs from * FT authentication sequence from the AP. The FT IEs are included in * the extra information in union wpa_event_data::ft_ies. */ EVENT_FT_RESPONSE, /** * EVENT_IBSS_RSN_START - Request RSN authentication in IBSS * * The driver can use this event to inform wpa_supplicant about a STA * in an IBSS with which protected frames could be exchanged. This * event starts RSN authentication with the other STA to authenticate * the STA and set up encryption keys with it. */ EVENT_IBSS_RSN_START, /** * EVENT_AUTH - Authentication result * * This event should be called when authentication attempt has been * completed. This is only used if the driver supports separate * authentication step (struct wpa_driver_ops::authenticate). * Information about authentication result is included in * union wpa_event_data::auth. */ EVENT_AUTH, /** * EVENT_DEAUTH - Authentication lost * * This event should be called when authentication is lost either due * to receiving deauthenticate frame from the AP or when sending that * frame to the current AP. * In AP mode, union wpa_event_data::deauth_info is required. */ EVENT_DEAUTH, /** * EVENT_ASSOC_REJECT - Association rejected * * This event should be called when (re)association attempt has been * rejected by the AP. Information about the association response is * included in union wpa_event_data::assoc_reject. */ EVENT_ASSOC_REJECT, /** * EVENT_AUTH_TIMED_OUT - Authentication timed out */ EVENT_AUTH_TIMED_OUT, /** * EVENT_ASSOC_TIMED_OUT - Association timed out */ EVENT_ASSOC_TIMED_OUT, /** * EVENT_WPS_BUTTON_PUSHED - Report hardware push button press for WPS */ EVENT_WPS_BUTTON_PUSHED, /** * EVENT_TX_STATUS - Report TX status */ EVENT_TX_STATUS, /** * EVENT_RX_FROM_UNKNOWN - Report RX from unknown STA */ EVENT_RX_FROM_UNKNOWN, /** * EVENT_RX_MGMT - Report RX of a management frame */ EVENT_RX_MGMT, /** * EVENT_REMAIN_ON_CHANNEL - Remain-on-channel duration started * * This event is used to indicate when the driver has started the * requested remain-on-channel duration. Information about the * operation is included in union wpa_event_data::remain_on_channel. */ EVENT_REMAIN_ON_CHANNEL, /** * EVENT_CANCEL_REMAIN_ON_CHANNEL - Remain-on-channel timed out * * This event is used to indicate when the driver has completed * remain-on-channel duration, i.e., may noot be available on the * requested channel anymore. Information about the * operation is included in union wpa_event_data::remain_on_channel. */ EVENT_CANCEL_REMAIN_ON_CHANNEL, /** * EVENT_RX_PROBE_REQ - Indicate received Probe Request frame * * This event is used to indicate when a Probe Request frame has been * received. Information about the received frame is included in * union wpa_event_data::rx_probe_req. The driver is required to report * these events only after successfully completed probe_req_report() * commands to request the events (i.e., report parameter is non-zero) * in station mode. In AP mode, Probe Request frames should always be * reported. */ EVENT_RX_PROBE_REQ, /** * EVENT_NEW_STA - New wired device noticed * * This event is used to indicate that a new device has been detected * in a network that does not use association-like functionality (i.e., * mainly wired Ethernet). This can be used to start EAPOL * authenticator when receiving a frame from a device. The address of * the device is included in union wpa_event_data::new_sta. */ EVENT_NEW_STA, /** * EVENT_EAPOL_RX - Report received EAPOL frame * * When in AP mode with hostapd, this event is required to be used to * deliver the receive EAPOL frames from the driver. */ EVENT_EAPOL_RX, /** * EVENT_SIGNAL_CHANGE - Indicate change in signal strength * * This event is used to indicate changes in the signal strength * observed in frames received from the current AP if signal strength * monitoring has been enabled with signal_monitor(). */ EVENT_SIGNAL_CHANGE, /** * EVENT_INTERFACE_ENABLED - Notify that interface was enabled * * This event is used to indicate that the interface was enabled after * having been previously disabled, e.g., due to rfkill. */ EVENT_INTERFACE_ENABLED, /** * EVENT_INTERFACE_DISABLED - Notify that interface was disabled * * This event is used to indicate that the interface was disabled, * e.g., due to rfkill. */ EVENT_INTERFACE_DISABLED, /** * EVENT_CHANNEL_LIST_CHANGED - Channel list changed * * This event is used to indicate that the channel list has changed, * e.g., because of a regulatory domain change triggered by scan * results including an AP advertising a country code. */ EVENT_CHANNEL_LIST_CHANGED, /** * EVENT_INTERFACE_UNAVAILABLE - Notify that interface is unavailable * * This event is used to indicate that the driver cannot maintain this * interface in its operation mode anymore. The most likely use for * this is to indicate that AP mode operation is not available due to * operating channel would need to be changed to a DFS channel when * the driver does not support radar detection and another virtual * interfaces caused the operating channel to change. Other similar * resource conflicts could also trigger this for station mode * interfaces. This event can be propagated when channel switching * fails. */ EVENT_INTERFACE_UNAVAILABLE, /** * EVENT_BEST_CHANNEL * * Driver generates this event whenever it detects a better channel * (e.g., based on RSSI or channel use). This information can be used * to improve channel selection for a new AP/P2P group. */ EVENT_BEST_CHANNEL, /** * EVENT_UNPROT_DEAUTH - Unprotected Deauthentication frame received * * This event should be called when a Deauthentication frame is dropped * due to it not being protected (MFP/IEEE 802.11w). * union wpa_event_data::unprot_deauth is required to provide more * details of the frame. */ EVENT_UNPROT_DEAUTH, /** * EVENT_UNPROT_DISASSOC - Unprotected Disassociation frame received * * This event should be called when a Disassociation frame is dropped * due to it not being protected (MFP/IEEE 802.11w). * union wpa_event_data::unprot_disassoc is required to provide more * details of the frame. */ EVENT_UNPROT_DISASSOC, /** * EVENT_STATION_LOW_ACK * * Driver generates this event whenever it detected that a particular * station was lost. Detection can be through massive transmission * failures for example. */ EVENT_STATION_LOW_ACK, /** * EVENT_IBSS_PEER_LOST - IBSS peer not reachable anymore */ EVENT_IBSS_PEER_LOST, /** * EVENT_DRIVER_GTK_REKEY - Device/driver did GTK rekey * * This event carries the new replay counter to notify wpa_supplicant * of the current EAPOL-Key Replay Counter in case the driver/firmware * completed Group Key Handshake while the host (including * wpa_supplicant was sleeping). */ EVENT_DRIVER_GTK_REKEY, /** * EVENT_SCHED_SCAN_STOPPED - Scheduled scan was stopped */ EVENT_SCHED_SCAN_STOPPED, /** * EVENT_DRIVER_CLIENT_POLL_OK - Station responded to poll * * This event indicates that the station responded to the poll * initiated with @poll_client. */ EVENT_DRIVER_CLIENT_POLL_OK, /** * EVENT_EAPOL_TX_STATUS - notify of EAPOL TX status */ EVENT_EAPOL_TX_STATUS, /** * EVENT_CH_SWITCH - AP or GO decided to switch channels * * Described in wpa_event_data.ch_switch * */ EVENT_CH_SWITCH, /** * EVENT_CH_SWITCH_STARTED - AP or GO started to switch channels * * This is a pre-switch event indicating the shortly following switch * of operating channels. * * Described in wpa_event_data.ch_switch */ EVENT_CH_SWITCH_STARTED, /** * EVENT_WNM - Request WNM operation * * This event can be used to request a WNM operation to be performed. */ EVENT_WNM, /** * EVENT_CONNECT_FAILED_REASON - Connection failure reason in AP mode * * This event indicates that the driver reported a connection failure * with the specified client (for example, max client reached, etc.) in * AP mode. */ EVENT_CONNECT_FAILED_REASON, /** * EVENT_DFS_RADAR_DETECTED - Notify of radar detection * * A radar has been detected on the supplied frequency, hostapd should * react accordingly (e.g., change channel). */ EVENT_DFS_RADAR_DETECTED, /** * EVENT_DFS_CAC_FINISHED - Notify that channel availability check has been completed * * After a successful CAC, the channel can be marked clear and used. */ EVENT_DFS_CAC_FINISHED, /** * EVENT_DFS_CAC_ABORTED - Notify that channel availability check has been aborted * * The CAC was not successful, and the channel remains in the previous * state. This may happen due to a radar being detected or other * external influences. */ EVENT_DFS_CAC_ABORTED, /** * EVENT_DFS_NOP_FINISHED - Notify that non-occupancy period is over * * The channel which was previously unavailable is now available again. */ EVENT_DFS_NOP_FINISHED, /** * EVENT_SURVEY - Received survey data * * This event gets triggered when a driver query is issued for survey * data and the requested data becomes available. The returned data is * stored in struct survey_results. The results provide at most one * survey entry for each frequency and at minimum will provide one * survey entry for one frequency. The survey data can be os_malloc()'d * and then os_free()'d, so the event callback must only copy data. */ EVENT_SURVEY, /** * EVENT_SCAN_STARTED - Scan started * * This indicates that driver has started a scan operation either based * on a request from wpa_supplicant/hostapd or from another application. * EVENT_SCAN_RESULTS is used to indicate when the scan has been * completed (either successfully or by getting cancelled). */ EVENT_SCAN_STARTED, /** * EVENT_AVOID_FREQUENCIES - Received avoid frequency range * * This event indicates a set of frequency ranges that should be avoided * to reduce issues due to interference or internal co-existence * information in the driver. */ EVENT_AVOID_FREQUENCIES, /** * EVENT_NEW_PEER_CANDIDATE - new (unknown) mesh peer notification */ EVENT_NEW_PEER_CANDIDATE, /** * EVENT_ACS_CHANNEL_SELECTED - Received selected channels by ACS * * Indicates a pair of primary and secondary channels chosen by ACS * in device. */ EVENT_ACS_CHANNEL_SELECTED, /** * EVENT_DFS_CAC_STARTED - Notify that channel availability check has * been started. * * This event indicates that channel availability check has been started * on a DFS frequency by a driver that supports DFS Offload. */ EVENT_DFS_CAC_STARTED, /** * EVENT_P2P_LO_STOP - Notify that P2P listen offload is stopped */ EVENT_P2P_LO_STOP, /** * EVENT_BEACON_LOSS - Beacon loss detected * * This event indicates that no Beacon frames has been received from * the current AP. This may indicate that the AP is not anymore in * range. */ EVENT_BEACON_LOSS, /** * EVENT_DFS_PRE_CAC_EXPIRED - Notify that channel availability check * done previously (Pre-CAC) on the channel has expired. This would * normally be on a non-ETSI DFS regulatory domain. DFS state of the * channel will be moved from available to usable. A new CAC has to be * performed before start operating on this channel. */ EVENT_DFS_PRE_CAC_EXPIRED, /** * EVENT_EXTERNAL_AUTH - This event interface is used by host drivers * that do not define separate commands for authentication and * association (~WPA_DRIVER_FLAGS_SME) but offload the 802.11 * authentication to wpa_supplicant. This event carries all the * necessary information from the host driver for the authentication to * happen. */ EVENT_EXTERNAL_AUTH, /** * EVENT_PORT_AUTHORIZED - Notification that a connection is authorized * * This event should be indicated when the driver completes the 4-way * handshake. This event should be preceded by an EVENT_ASSOC that * indicates the completion of IEEE 802.11 association. */ EVENT_PORT_AUTHORIZED, /** * EVENT_STATION_OPMODE_CHANGED - Notify STA's HT/VHT operation mode * change event. */ EVENT_STATION_OPMODE_CHANGED, /** * EVENT_INTERFACE_MAC_CHANGED - Notify that interface MAC changed * * This event is emitted when the MAC changes while the interface is * enabled. When an interface was disabled and becomes enabled, it * must be always assumed that the MAC possibly changed. */ EVENT_INTERFACE_MAC_CHANGED, /** * EVENT_WDS_STA_INTERFACE_STATUS - Notify WDS STA interface status * * This event is emitted when an interface is added/removed for WDS STA. */ EVENT_WDS_STA_INTERFACE_STATUS, /** * EVENT_UPDATE_DH - Notification of updated DH information */ EVENT_UPDATE_DH, }; /** * struct freq_survey - Channel survey info * * @ifidx: Interface index in which this survey was observed * @freq: Center of frequency of the surveyed channel * @nf: Channel noise floor in dBm * @channel_time: Amount of time in ms the radio spent on the channel * @channel_time_busy: Amount of time in ms the radio detected some signal * that indicated to the radio the channel was not clear * @channel_time_rx: Amount of time the radio spent receiving data * @channel_time_tx: Amount of time the radio spent transmitting data * @filled: bitmask indicating which fields have been reported, see * SURVEY_HAS_* defines. * @list: Internal list pointers */ struct freq_survey { u32 ifidx; unsigned int freq; s8 nf; u64 channel_time; u64 channel_time_busy; u64 channel_time_rx; u64 channel_time_tx; unsigned int filled; struct dl_list list; }; #define SURVEY_HAS_NF BIT(0) #define SURVEY_HAS_CHAN_TIME BIT(1) #define SURVEY_HAS_CHAN_TIME_BUSY BIT(2) #define SURVEY_HAS_CHAN_TIME_RX BIT(3) #define SURVEY_HAS_CHAN_TIME_TX BIT(4) /** * union wpa_event_data - Additional data for wpa_supplicant_event() calls */ union wpa_event_data { /** * struct assoc_info - Data for EVENT_ASSOC and EVENT_ASSOCINFO events * * This structure is optional for EVENT_ASSOC calls and required for * EVENT_ASSOCINFO calls. By using EVENT_ASSOC with this data, the * driver interface does not need to generate separate EVENT_ASSOCINFO * calls. */ struct assoc_info { /** * reassoc - Flag to indicate association or reassociation */ int reassoc; /** * req_ies - (Re)Association Request IEs * * If the driver generates WPA/RSN IE, this event data must be * returned for WPA handshake to have needed information. If * wpa_supplicant-generated WPA/RSN IE is used, this * information event is optional. * * This should start with the first IE (fixed fields before IEs * are not included). */ const u8 *req_ies; /** * req_ies_len - Length of req_ies in bytes */ size_t req_ies_len; /** * resp_ies - (Re)Association Response IEs * * Optional association data from the driver. This data is not * required WPA, but may be useful for some protocols and as * such, should be reported if this is available to the driver * interface. * * This should start with the first IE (fixed fields before IEs * are not included). */ const u8 *resp_ies; /** * resp_ies_len - Length of resp_ies in bytes */ size_t resp_ies_len; /** * resp_frame - (Re)Association Response frame */ const u8 *resp_frame; /** * resp_frame_len - (Re)Association Response frame length */ size_t resp_frame_len; /** * beacon_ies - Beacon or Probe Response IEs * * Optional Beacon/ProbeResp data: IEs included in Beacon or * Probe Response frames from the current AP (i.e., the one * that the client just associated with). This information is * used to update WPA/RSN IE for the AP. If this field is not * set, the results from previous scan will be used. If no * data for the new AP is found, scan results will be requested * again (without scan request). At this point, the driver is * expected to provide WPA/RSN IE for the AP (if WPA/WPA2 is * used). * * This should start with the first IE (fixed fields before IEs * are not included). */ const u8 *beacon_ies; /** * beacon_ies_len - Length of beacon_ies */ size_t beacon_ies_len; /** * freq - Frequency of the operational channel in MHz */ unsigned int freq; /** * wmm_params - WMM parameters used in this association. */ struct wmm_params wmm_params; /** * addr - Station address (for AP mode) */ const u8 *addr; /** * The following is the key management offload information * @authorized * @key_replay_ctr * @key_replay_ctr_len * @ptk_kck * @ptk_kek_len * @ptk_kek * @ptk_kek_len */ /** * authorized - Status of key management offload, * 1 = successful */ int authorized; /** * key_replay_ctr - Key replay counter value last used * in a valid EAPOL-Key frame */ const u8 *key_replay_ctr; /** * key_replay_ctr_len - The length of key_replay_ctr */ size_t key_replay_ctr_len; /** * ptk_kck - The derived PTK KCK */ const u8 *ptk_kck; /** * ptk_kek_len - The length of ptk_kck */ size_t ptk_kck_len; /** * ptk_kek - The derived PTK KEK * This is used in key management offload and also in FILS SK * offload. */ const u8 *ptk_kek; /** * ptk_kek_len - The length of ptk_kek */ size_t ptk_kek_len; /** * subnet_status - The subnet status: * 0 = unknown, 1 = unchanged, 2 = changed */ u8 subnet_status; /** * The following information is used in FILS SK offload * @fils_erp_next_seq_num * @fils_pmk * @fils_pmk_len * @fils_pmkid */ /** * fils_erp_next_seq_num - The next sequence number to use in * FILS ERP messages */ u16 fils_erp_next_seq_num; /** * fils_pmk - A new PMK if generated in case of FILS * authentication */ const u8 *fils_pmk; /** * fils_pmk_len - Length of fils_pmk */ size_t fils_pmk_len; /** * fils_pmkid - PMKID used or generated in FILS authentication */ const u8 *fils_pmkid; } assoc_info; /** * struct disassoc_info - Data for EVENT_DISASSOC events */ struct disassoc_info { /** * addr - Station address (for AP mode) */ const u8 *addr; /** * reason_code - Reason Code (host byte order) used in * Deauthentication frame */ u16 reason_code; /** * ie - Optional IE(s) in Disassociation frame */ const u8 *ie; /** * ie_len - Length of ie buffer in octets */ size_t ie_len; /** * locally_generated - Whether the frame was locally generated */ int locally_generated; } disassoc_info; /** * struct deauth_info - Data for EVENT_DEAUTH events */ struct deauth_info { /** * addr - Station address (for AP mode) */ const u8 *addr; /** * reason_code - Reason Code (host byte order) used in * Deauthentication frame */ u16 reason_code; /** * ie - Optional IE(s) in Deauthentication frame */ const u8 *ie; /** * ie_len - Length of ie buffer in octets */ size_t ie_len; /** * locally_generated - Whether the frame was locally generated */ int locally_generated; } deauth_info; /** * struct michael_mic_failure - Data for EVENT_MICHAEL_MIC_FAILURE */ struct michael_mic_failure { int unicast; const u8 *src; } michael_mic_failure; /** * struct interface_status - Data for EVENT_INTERFACE_STATUS */ struct interface_status { unsigned int ifindex; char ifname[100]; enum { EVENT_INTERFACE_ADDED, EVENT_INTERFACE_REMOVED } ievent; } interface_status; /** * struct pmkid_candidate - Data for EVENT_PMKID_CANDIDATE */ struct pmkid_candidate { /** BSSID of the PMKID candidate */ u8 bssid[ETH_ALEN]; /** Smaller the index, higher the priority */ int index; /** Whether RSN IE includes pre-authenticate flag */ int preauth; } pmkid_candidate; /** * struct tdls - Data for EVENT_TDLS */ struct tdls { u8 peer[ETH_ALEN]; enum { TDLS_REQUEST_SETUP, TDLS_REQUEST_TEARDOWN, TDLS_REQUEST_DISCOVER, } oper; u16 reason_code; /* for teardown */ } tdls; /** * struct wnm - Data for EVENT_WNM */ struct wnm { u8 addr[ETH_ALEN]; enum { WNM_OPER_SLEEP, } oper; enum { WNM_SLEEP_ENTER, WNM_SLEEP_EXIT } sleep_action; int sleep_intval; u16 reason_code; u8 *buf; u16 buf_len; } wnm; /** * struct ft_ies - FT information elements (EVENT_FT_RESPONSE) * * During FT (IEEE 802.11r) authentication sequence, the driver is * expected to use this event to report received FT IEs (MDIE, FTIE, * RSN IE, TIE, possible resource request) to the supplicant. The FT * IEs for the next message will be delivered through the * struct wpa_driver_ops::update_ft_ies() callback. */ struct ft_ies { const u8 *ies; size_t ies_len; int ft_action; u8 target_ap[ETH_ALEN]; /** Optional IE(s), e.g., WMM TSPEC(s), for RIC-Request */ const u8 *ric_ies; /** Length of ric_ies buffer in octets */ size_t ric_ies_len; } ft_ies; /** * struct ibss_rsn_start - Data for EVENT_IBSS_RSN_START */ struct ibss_rsn_start { u8 peer[ETH_ALEN]; } ibss_rsn_start; /** * struct auth_info - Data for EVENT_AUTH events */ struct auth_info { u8 peer[ETH_ALEN]; u8 bssid[ETH_ALEN]; u16 auth_type; u16 auth_transaction; u16 status_code; const u8 *ies; size_t ies_len; } auth; /** * struct assoc_reject - Data for EVENT_ASSOC_REJECT events */ struct assoc_reject { /** * bssid - BSSID of the AP that rejected association */ const u8 *bssid; /** * resp_ies - (Re)Association Response IEs * * Optional association data from the driver. This data is not * required WPA, but may be useful for some protocols and as * such, should be reported if this is available to the driver * interface. * * This should start with the first IE (fixed fields before IEs * are not included). */ const u8 *resp_ies; /** * resp_ies_len - Length of resp_ies in bytes */ size_t resp_ies_len; /** * status_code - Status Code from (Re)association Response */ u16 status_code; /** * timed_out - Whether failure is due to timeout (etc.) rather * than explicit rejection response from the AP. */ int timed_out; /** * timeout_reason - Reason for the timeout */ const char *timeout_reason; /** * fils_erp_next_seq_num - The next sequence number to use in * FILS ERP messages */ u16 fils_erp_next_seq_num; } assoc_reject; struct timeout_event { u8 addr[ETH_ALEN]; } timeout_event; /** * struct tx_status - Data for EVENT_TX_STATUS events */ struct tx_status { u16 type; u16 stype; const u8 *dst; const u8 *data; size_t data_len; int ack; } tx_status; /** * struct rx_from_unknown - Data for EVENT_RX_FROM_UNKNOWN events */ struct rx_from_unknown { const u8 *bssid; const u8 *addr; int wds; } rx_from_unknown; /** * struct rx_mgmt - Data for EVENT_RX_MGMT events */ struct rx_mgmt { const u8 *frame; size_t frame_len; u32 datarate; /** * drv_priv - Pointer to store driver private BSS information * * If not set to NULL, this is used for comparison with * hostapd_data->drv_priv to determine which BSS should process * the frame. */ void *drv_priv; /** * freq - Frequency (in MHz) on which the frame was received */ int freq; /** * ssi_signal - Signal strength in dBm (or 0 if not available) */ int ssi_signal; } rx_mgmt; /** * struct remain_on_channel - Data for EVENT_REMAIN_ON_CHANNEL events * * This is also used with EVENT_CANCEL_REMAIN_ON_CHANNEL events. */ struct remain_on_channel { /** * freq - Channel frequency in MHz */ unsigned int freq; /** * duration - Duration to remain on the channel in milliseconds */ unsigned int duration; } remain_on_channel; /** * struct scan_info - Optional data for EVENT_SCAN_RESULTS events * @aborted: Whether the scan was aborted * @freqs: Scanned frequencies in MHz (%NULL = all channels scanned) * @num_freqs: Number of entries in freqs array * @ssids: Scanned SSIDs (%NULL or zero-length SSID indicates wildcard * SSID) * @num_ssids: Number of entries in ssids array * @external_scan: Whether the scan info is for an external scan * @nl_scan_event: 1 if the source of this scan event is a normal scan, * 0 if the source of the scan event is a vendor scan * @scan_start_tsf: Time when the scan started in terms of TSF of the * BSS that the interface that requested the scan is connected to * (if available). * @scan_start_tsf_bssid: The BSSID according to which %scan_start_tsf * is set. */ struct scan_info { int aborted; const int *freqs; size_t num_freqs; struct wpa_driver_scan_ssid ssids[WPAS_MAX_SCAN_SSIDS]; size_t num_ssids; int external_scan; int nl_scan_event; u64 scan_start_tsf; u8 scan_start_tsf_bssid[ETH_ALEN]; } scan_info; /** * struct rx_probe_req - Data for EVENT_RX_PROBE_REQ events */ struct rx_probe_req { /** * sa - Source address of the received Probe Request frame */ const u8 *sa; /** * da - Destination address of the received Probe Request frame * or %NULL if not available */ const u8 *da; /** * bssid - BSSID of the received Probe Request frame or %NULL * if not available */ const u8 *bssid; /** * ie - IEs from the Probe Request body */ const u8 *ie; /** * ie_len - Length of ie buffer in octets */ size_t ie_len; /** * signal - signal strength in dBm (or 0 if not available) */ int ssi_signal; } rx_probe_req; /** * struct new_sta - Data for EVENT_NEW_STA events */ struct new_sta { const u8 *addr; } new_sta; /** * struct eapol_rx - Data for EVENT_EAPOL_RX events */ struct eapol_rx { const u8 *src; const u8 *data; size_t data_len; } eapol_rx; /** * signal_change - Data for EVENT_SIGNAL_CHANGE events */ struct wpa_signal_info signal_change; /** * struct best_channel - Data for EVENT_BEST_CHANNEL events * @freq_24: Best 2.4 GHz band channel frequency in MHz * @freq_5: Best 5 GHz band channel frequency in MHz * @freq_overall: Best channel frequency in MHz * * 0 can be used to indicate no preference in either band. */ struct best_channel { int freq_24; int freq_5; int freq_overall; } best_chan; struct unprot_deauth { const u8 *sa; const u8 *da; u16 reason_code; } unprot_deauth; struct unprot_disassoc { const u8 *sa; const u8 *da; u16 reason_code; } unprot_disassoc; /** * struct low_ack - Data for EVENT_STATION_LOW_ACK events * @addr: station address * @num_packets: Number of packets lost (consecutive packets not * acknowledged) */ struct low_ack { u8 addr[ETH_ALEN]; u32 num_packets; } low_ack; /** * struct ibss_peer_lost - Data for EVENT_IBSS_PEER_LOST */ struct ibss_peer_lost { u8 peer[ETH_ALEN]; } ibss_peer_lost; /** * struct driver_gtk_rekey - Data for EVENT_DRIVER_GTK_REKEY */ struct driver_gtk_rekey { const u8 *bssid; const u8 *replay_ctr; } driver_gtk_rekey; /** * struct client_poll - Data for EVENT_DRIVER_CLIENT_POLL_OK events * @addr: station address */ struct client_poll { u8 addr[ETH_ALEN]; } client_poll; /** * struct eapol_tx_status * @dst: Original destination * @data: Data starting with IEEE 802.1X header (!) * @data_len: Length of data * @ack: Indicates ack or lost frame * * This corresponds to hapd_send_eapol if the frame sent * there isn't just reported as EVENT_TX_STATUS. */ struct eapol_tx_status { const u8 *dst; const u8 *data; int data_len; int ack; } eapol_tx_status; /** * struct ch_switch * @freq: Frequency of new channel in MHz * @ht_enabled: Whether this is an HT channel * @ch_offset: Secondary channel offset * @ch_width: Channel width * @cf1: Center frequency 1 * @cf2: Center frequency 2 */ struct ch_switch { int freq; int ht_enabled; int ch_offset; enum chan_width ch_width; int cf1; int cf2; } ch_switch; /** * struct connect_failed - Data for EVENT_CONNECT_FAILED_REASON * @addr: Remote client address * @code: Reason code for connection failure */ struct connect_failed_reason { u8 addr[ETH_ALEN]; enum { MAX_CLIENT_REACHED, BLOCKED_CLIENT } code; } connect_failed_reason; /** * struct dfs_event - Data for radar detected events * @freq: Frequency of the channel in MHz */ struct dfs_event { int freq; int ht_enabled; int chan_offset; enum chan_width chan_width; int cf1; int cf2; } dfs_event; /** * survey_results - Survey result data for EVENT_SURVEY * @freq_filter: Requested frequency survey filter, 0 if request * was for all survey data * @survey_list: Linked list of survey data (struct freq_survey) */ struct survey_results { unsigned int freq_filter; struct dl_list survey_list; /* struct freq_survey */ } survey_results; /** * channel_list_changed - Data for EVENT_CHANNEL_LIST_CHANGED * @initiator: Initiator of the regulatory change * @type: Regulatory change type * @alpha2: Country code (or "" if not available) */ struct channel_list_changed { enum reg_change_initiator initiator; enum reg_type type; char alpha2[3]; } channel_list_changed; /** * freq_range - List of frequency ranges * * This is used as the data with EVENT_AVOID_FREQUENCIES. */ struct wpa_freq_range_list freq_range; /** * struct mesh_peer * * @peer: Peer address * @ies: Beacon IEs * @ie_len: Length of @ies * * Notification of new candidate mesh peer. */ struct mesh_peer { const u8 *peer; const u8 *ies; size_t ie_len; } mesh_peer; /** * struct acs_selected_channels - Data for EVENT_ACS_CHANNEL_SELECTED * @pri_freq: Selected primary frequency * @sec_freq: Selected secondary frequency * @vht_seg0_center_ch: VHT mode Segment0 center channel * @vht_seg1_center_ch: VHT mode Segment1 center channel * @ch_width: Selected Channel width by driver. Driver may choose to * change hostapd configured ACS channel width due driver internal * channel restrictions. * hw_mode: Selected band (used with hw_mode=any) */ struct acs_selected_channels { unsigned int pri_freq; unsigned int sec_freq; u8 vht_seg0_center_ch; u8 vht_seg1_center_ch; u16 ch_width; enum hostapd_hw_mode hw_mode; } acs_selected_channels; /** * struct p2p_lo_stop - Reason code for P2P Listen offload stop event * @reason_code: Reason for stopping offload * P2P_LO_STOPPED_REASON_COMPLETE: Listen offload finished as * scheduled. * P2P_LO_STOPPED_REASON_RECV_STOP_CMD: Host requested offload to * be stopped. * P2P_LO_STOPPED_REASON_INVALID_PARAM: Invalid listen offload * parameters. * P2P_LO_STOPPED_REASON_NOT_SUPPORTED: Listen offload not * supported by device. */ struct p2p_lo_stop { enum { P2P_LO_STOPPED_REASON_COMPLETE = 0, P2P_LO_STOPPED_REASON_RECV_STOP_CMD, P2P_LO_STOPPED_REASON_INVALID_PARAM, P2P_LO_STOPPED_REASON_NOT_SUPPORTED, } reason_code; } p2p_lo_stop; /* For EVENT_EXTERNAL_AUTH */ struct external_auth external_auth; /** * struct sta_opmode - Station's operation mode change event * @addr: The station MAC address * @smps_mode: SMPS mode of the station * @chan_width: Channel width of the station * @rx_nss: RX_NSS of the station * * This is used as data with EVENT_STATION_OPMODE_CHANGED. */ struct sta_opmode { const u8 *addr; enum smps_mode smps_mode; enum chan_width chan_width; u8 rx_nss; } sta_opmode; /** * struct wds_sta_interface - Data for EVENT_WDS_STA_INTERFACE_STATUS. */ struct wds_sta_interface { const u8 *sta_addr; const char *ifname; enum { INTERFACE_ADDED, INTERFACE_REMOVED } istatus; } wds_sta_interface; /** * struct update_dh - Data for EVENT_UPDATE_DH */ struct update_dh { const u8 *peer; const u8 *ie; size_t ie_len; } update_dh; }; /** * wpa_supplicant_event - Report a driver event for wpa_supplicant * @ctx: Context pointer (wpa_s); this is the ctx variable registered * with struct wpa_driver_ops::init() * @event: event type (defined above) * @data: possible extra data for the event * * Driver wrapper code should call this function whenever an event is received * from the driver. */ void wpa_supplicant_event(void *ctx, enum wpa_event_type event, union wpa_event_data *data); /** * wpa_supplicant_event_global - Report a driver event for wpa_supplicant * @ctx: Context pointer (wpa_s); this is the ctx variable registered * with struct wpa_driver_ops::init() * @event: event type (defined above) * @data: possible extra data for the event * * Same as wpa_supplicant_event(), but we search for the interface in * wpa_global. */ void wpa_supplicant_event_global(void *ctx, enum wpa_event_type event, union wpa_event_data *data); /* * The following inline functions are provided for convenience to simplify * event indication for some of the common events. */ static inline void drv_event_assoc(void *ctx, const u8 *addr, const u8 *ie, size_t ielen, int reassoc) { union wpa_event_data event; os_memset(&event, 0, sizeof(event)); event.assoc_info.reassoc = reassoc; event.assoc_info.req_ies = ie; event.assoc_info.req_ies_len = ielen; event.assoc_info.addr = addr; wpa_supplicant_event(ctx, EVENT_ASSOC, &event); } static inline void drv_event_disassoc(void *ctx, const u8 *addr) { union wpa_event_data event; os_memset(&event, 0, sizeof(event)); event.disassoc_info.addr = addr; wpa_supplicant_event(ctx, EVENT_DISASSOC, &event); } static inline void drv_event_eapol_rx(void *ctx, const u8 *src, const u8 *data, size_t data_len) { union wpa_event_data event; os_memset(&event, 0, sizeof(event)); event.eapol_rx.src = src; event.eapol_rx.data = data; event.eapol_rx.data_len = data_len; wpa_supplicant_event(ctx, EVENT_EAPOL_RX, &event); } /* driver_common.c */ void wpa_scan_results_free(struct wpa_scan_results *res); /* Convert wpa_event_type to a string for logging */ const char * event_to_string(enum wpa_event_type event); /* Convert chan_width to a string for logging and control interfaces */ const char * channel_width_to_string(enum chan_width width); int channel_width_to_int(enum chan_width width); int ht_supported(const struct hostapd_hw_modes *mode); int vht_supported(const struct hostapd_hw_modes *mode); struct wowlan_triggers * wpa_get_wowlan_triggers(const char *wowlan_triggers, const struct wpa_driver_capa *capa); /* Convert driver flag to string */ const char * driver_flag_to_string(u64 flag); /* NULL terminated array of linked in driver wrappers */ extern const struct wpa_driver_ops *const wpa_drivers[]; /* Available drivers */ #ifdef CONFIG_DRIVER_WEXT extern const struct wpa_driver_ops wpa_driver_wext_ops; /* driver_wext.c */ #endif /* CONFIG_DRIVER_WEXT */ #ifdef CONFIG_DRIVER_NL80211 /* driver_nl80211.c */ extern const struct wpa_driver_ops wpa_driver_nl80211_ops; #endif /* CONFIG_DRIVER_NL80211 */ #ifdef CONFIG_DRIVER_HOSTAP extern const struct wpa_driver_ops wpa_driver_hostap_ops; /* driver_hostap.c */ #endif /* CONFIG_DRIVER_HOSTAP */ #ifdef CONFIG_DRIVER_BSD extern const struct wpa_driver_ops wpa_driver_bsd_ops; /* driver_bsd.c */ #endif /* CONFIG_DRIVER_BSD */ #ifdef CONFIG_DRIVER_OPENBSD /* driver_openbsd.c */ extern const struct wpa_driver_ops wpa_driver_openbsd_ops; #endif /* CONFIG_DRIVER_OPENBSD */ #ifdef CONFIG_DRIVER_NDIS extern struct wpa_driver_ops wpa_driver_ndis_ops; /* driver_ndis.c */ #endif /* CONFIG_DRIVER_NDIS */ #ifdef CONFIG_DRIVER_WIRED extern const struct wpa_driver_ops wpa_driver_wired_ops; /* driver_wired.c */ #endif /* CONFIG_DRIVER_WIRED */ #ifdef CONFIG_DRIVER_MACSEC_QCA /* driver_macsec_qca.c */ extern const struct wpa_driver_ops wpa_driver_macsec_qca_ops; #endif /* CONFIG_DRIVER_MACSEC_QCA */ #ifdef CONFIG_DRIVER_MACSEC_LINUX /* driver_macsec_linux.c */ extern const struct wpa_driver_ops wpa_driver_macsec_linux_ops; #endif /* CONFIG_DRIVER_MACSEC_LINUX */ #ifdef CONFIG_DRIVER_ROBOSWITCH /* driver_roboswitch.c */ extern const struct wpa_driver_ops wpa_driver_roboswitch_ops; #endif /* CONFIG_DRIVER_ROBOSWITCH */ #ifdef CONFIG_DRIVER_ATHEROS /* driver_atheros.c */ extern const struct wpa_driver_ops wpa_driver_atheros_ops; #endif /* CONFIG_DRIVER_ATHEROS */ #ifdef CONFIG_DRIVER_NONE extern const struct wpa_driver_ops wpa_driver_none_ops; /* driver_none.c */ #endif /* CONFIG_DRIVER_NONE */ #endif /* DRIVER_H */