# Test cases for Device Provisioning Protocol (DPP) version 3 # Copyright (c) 2021-2022, Qualcomm Innovation Center, Inc. # # This software may be distributed under the terms of the BSD license. # See README for more details. import binascii import os import time import hostapd from wlantest import WlantestCapture from test_dpp import check_dpp_capab, run_dpp_auto_connect, wait_auth_success, update_hapd_config from utils import * def test_dpp_network_intro_version(dev, apdev): """DPP Network Introduction and protocol version""" check_dpp_capab(dev[0], min_ver=3) try: id, hapd = run_dpp_auto_connect(dev, apdev, 1, stop_after_prov=True) dev[0].select_network(id, freq=2412) dev[0].wait_connected() finally: dev[0].set("dpp_config_processing", "0", allow_fail=True) def test_dpp_network_intro_version_change(dev, apdev): """DPP Network Introduction and protocol version change""" check_dpp_capab(dev[0], min_ver=3) try: dev[0].set("dpp_version_override", "2") id, hapd = run_dpp_auto_connect(dev, apdev, 1, stop_after_prov=True) dev[0].set("dpp_version_override", "3") dev[0].select_network(id, freq=2412) dev[0].wait_connected() finally: dev[0].set("dpp_config_processing", "0", allow_fail=True) def test_dpp_network_intro_version_missing_req(dev, apdev): """DPP Network Introduction and protocol version missing from request""" check_dpp_capab(dev[0], min_ver=3) try: dev[0].set("dpp_version_override", "2") id, hapd = run_dpp_auto_connect(dev, apdev, 1, stop_after_prov=True) dev[0].set("dpp_version_override", "3") dev[0].set("dpp_test", "92") dev[0].select_network(id, freq=2412) ev = dev[0].wait_event(["DPP-INTRO"], timeout=10) if ev is None: raise Exception("DPP network introduction result not seen on STA") if "status=8" not in ev: raise Exception("Unexpected network introduction result on STA: " + ev) finally: dev[0].set("dpp_config_processing", "0", allow_fail=True) def run_dpp_tcp_pkex(dev0, dev1, cap_lo, sae=False, status=False): check_dpp_capab(dev0, min_ver=3) check_dpp_capab(dev1, min_ver=3) wt = WlantestCapture('lo', cap_lo) time.sleep(1) # Controller if sae: ssid = binascii.hexlify("sae".encode()).decode() password = binascii.hexlify("sae-password".encode()).decode() val = "conf=sta-sae ssid=%s pass=%s" % (ssid, password) if status: val += " conn_status=1" dev1.set("dpp_configurator_params", val) else: conf_id = dev1.dpp_configurator_add() dev1.set("dpp_configurator_params", "conf=sta-dpp configurator=%d" % conf_id) req = "DPP_CONTROLLER_START" own = None if "OK" not in dev1.request(req): raise Exception("Failed to start Controller") code = "secret" id1 = dev1.dpp_bootstrap_gen(type="pkex") cmd = "own=%d" % id1 cmd += " code=%s" % code res = dev1.request("DPP_PKEX_ADD " + cmd) if "FAIL" in res: raise Exception("Failed to set PKEX data (responder)") dev0.dpp_pkex_init(identifier=None, code=code, role="enrollee", tcp_addr="127.0.0.1") res = wait_auth_success(dev1, dev0, configurator=dev1, enrollee=dev0, allow_enrollee_failure=True, allow_configurator_failure=True) if status: if 'wait_conn_status' not in res or not res['wait_conn_status']: raise Exception("wait_conn_status not reported") time.sleep(0.5) wt.close() def test_dpp_tcp_pkex(dev, apdev, params): """DPP/PKEXv2 over TCP""" prefix = "dpp_tcp_pkex" cap_lo = os.path.join(params['logdir'], prefix + ".lo.pcap") try: run_dpp_tcp_pkex(dev[0], dev[1], cap_lo) finally: dev[1].request("DPP_CONTROLLER_STOP") def run_dpp_tcp_pkex_auto_connect_2(dev, apdev, params, status, start_ap=True): check_dpp_capab(dev[0], min_ver=3) check_sae_capab(dev[0]) dev[0].set("sae_groups", "") cap_lo = params['prefix'] + ".lo.pcap" params = {"ssid": "sae", "wpa": "2", "wpa_key_mgmt": "SAE", "ieee80211w": "2", "rsn_pairwise": "CCMP", "sae_password": "sae-password"} if start_ap: hapd = hostapd.add_ap(apdev[0], params) try: dev[0].set("dpp_config_processing", "2") run_dpp_tcp_pkex(dev[0], dev[1], cap_lo, sae=True, status=status) if start_ap: dev[0].wait_connected() if status: ev = dev[1].wait_event(["DPP-CONN-STATUS-RESULT"], timeout=16) if ev is None: raise Exception("Connection status resutl not reported") if start_ap and "result=0" not in ev: raise Exception("Unexpected result in success case: " + ev) if (not start_ap) and "result=10" not in ev: raise Exception("Unexpected result in failure case: " + ev) if "ssid=sae " not in ev: raise Exception("Missing SSID: " + ssid) finally: dev[0].set("dpp_config_processing", "0", allow_fail=True) dev[1].request("DPP_CONTROLLER_STOP") def test_dpp_tcp_pkex_auto_connect_2(dev, apdev, params): """DPP/PKEXv2 over TCP and automatic connection""" run_dpp_tcp_pkex_auto_connect_2(dev, apdev, params, False) def test_dpp_tcp_pkex_auto_connect_2_status(dev, apdev, params): """DPP/PKEXv2 over TCP and automatic connection status""" run_dpp_tcp_pkex_auto_connect_2(dev, apdev, params, True) def test_dpp_tcp_pkex_auto_connect_2_status_fail(dev, apdev, params): """DPP/PKEXv2 over TCP and automatic connection status for failure""" run_dpp_tcp_pkex_auto_connect_2(dev, apdev, params, True, start_ap=False) def test_dpp_tcp_pkex_while_associated(dev, apdev, params): """DPP/PKEXv2 over TCP while associated""" try: run_dpp_tcp_pkex_while_associated(dev, apdev, params, False) finally: dev[1].request("DPP_CONTROLLER_STOP") dev[0].set("dpp_config_processing", "0", allow_fail=True) def test_dpp_tcp_pkex_while_associated_conn_status(dev, apdev, params): """DPP/PKEXv2 over TCP while associated (conn status)""" try: run_dpp_tcp_pkex_while_associated(dev, apdev, params, True) finally: dev[1].request("DPP_CONTROLLER_STOP") dev[0].set("dpp_config_processing", "0", allow_fail=True) def run_dpp_tcp_pkex_while_associated(dev, apdev, params, status): check_dpp_capab(dev[0], min_ver=3) check_sae_capab(dev[0]) cap_lo = params['prefix'] + ".lo.pcap" params = {"ssid": "current", "wpa": "2", "wpa_key_mgmt": "SAE", "ieee80211w": "2", "rsn_pairwise": "CCMP", "sae_password": "password"} hapd = hostapd.add_ap(apdev[0], params) params = {"ssid": "sae", "wpa": "2", "wpa_key_mgmt": "SAE", "ieee80211w": "2", "rsn_pairwise": "CCMP", "sae_password": "sae-password"} hapd2 = hostapd.add_ap(apdev[1], params) dev[0].set("dpp_config_processing", "2") dev[0].set("sae_groups", "") dev[0].connect("current", psk="password", key_mgmt="SAE", ieee80211w="2", scan_freq="2412") run_dpp_tcp_pkex(dev[0], dev[1], cap_lo, sae=True, status=status) if status: ev = dev[1].wait_event(["DPP-CONN-STATUS-RESULT"], timeout=16) if ev is None: raise Exception("Connection status result not reported") if "result=0" not in ev: raise Exception("Unexpected result in success case: " + ev) dev[0].wait_connected(timeout=30) def test_dpp_controller_relay_pkex(dev, apdev, params): """DPP Controller/Relay with PKEX""" try: run_dpp_controller_relay_pkex(dev, apdev, params) finally: dev[0].set("dpp_config_processing", "0", allow_fail=True) dev[1].request("DPP_CONTROLLER_STOP") def run_dpp_controller_relay_pkex(dev, apdev, params): check_dpp_capab(dev[0], min_ver=3) check_dpp_capab(dev[1], min_ver=3) prefix = "dpp_controller_relay_pkex" cap_lo = os.path.join(params['logdir'], prefix + ".lo.pcap") wt = WlantestCapture('lo', cap_lo) # Controller conf_id = dev[1].dpp_configurator_add() dev[1].set("dpp_configurator_params", "conf=sta-dpp configurator=%d" % conf_id) id_c = dev[1].dpp_bootstrap_gen() res = dev[1].request("DPP_BOOTSTRAP_INFO %d" % id_c) pkhash = None for line in res.splitlines(): name, value = line.split('=') if name == "pkhash": pkhash = value break if not pkhash: raise Exception("Could not fetch public key hash from Controller") if "OK" not in dev[1].request("DPP_CONTROLLER_START"): raise Exception("Failed to start Controller") # Relay params = {"ssid": "unconfigured", "channel": "6", "dpp_controller": "ipaddr=127.0.0.1 pkhash=" + pkhash} relay = hostapd.add_ap(apdev[1], params) check_dpp_capab(relay) # Enroll Relay to the network id_h = relay.dpp_bootstrap_gen(chan="81/6", mac=True) uri_r = relay.request("DPP_BOOTSTRAP_GET_URI %d" % id_h) dev[1].dpp_auth_init(uri=uri_r, conf="ap-dpp", configurator=conf_id) wait_auth_success(relay, dev[1], configurator=dev[1], enrollee=relay) update_hapd_config(relay) code = "secret" id1 = dev[1].dpp_bootstrap_gen(type="pkex") cmd = "own=%d" % id1 cmd += " code=%s" % code res = dev[1].request("DPP_PKEX_ADD " + cmd) if "FAIL" in res: raise Exception("Failed to set PKEX data (Controller)") dev[0].flush_scan_cache() # Initiate PKEX from Enrollee dev[0].set("dpp_config_processing", "2") dev[0].dpp_pkex_init(identifier=None, code=code, role="enrollee") wait_auth_success(dev[1], dev[0], configurator=dev[1], enrollee=dev[0], allow_enrollee_failure=True, allow_configurator_failure=True) ev = dev[0].wait_event(["DPP-NETWORK-ID"], timeout=1) if ev is None: raise Exception("DPP network id not reported") network = int(ev.split(' ')[1]) dev[0].wait_connected() dev[0].dump_monitor() time.sleep(0.5) wt.close()