# Test cases for VHT operations with hostapd # Copyright (c) 2014, Qualcomm Atheros, Inc. # Copyright (c) 2013, Intel Corporation # # This software may be distributed under the terms of the BSD license. # See README for more details. import logging logger = logging.getLogger() import os import subprocess, time import hwsim_utils import hostapd from utils import HwsimSkip from test_dfs import wait_dfs_event from test_ap_csa import csa_supported from test_ap_ht import clear_scan_cache def vht_supported(): cmd = subprocess.Popen(["iw", "reg", "get"], stdout=subprocess.PIPE) reg = cmd.stdout.read() if "@ 80)" in reg or "@ 160)" in reg: return True return False def test_ap_vht80(dev, apdev): """VHT with 80 MHz channel width""" try: hapd = None params = { "ssid": "vht", "country_code": "FI", "hw_mode": "a", "channel": "36", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "1", "vht_oper_centr_freq_seg0_idx": "42" } hapd = hostapd.add_ap(apdev[0], params) bssid = apdev[0]['bssid'] dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180") hwsim_utils.test_connectivity(dev[0], hapd) sig = dev[0].request("SIGNAL_POLL").splitlines() if "FREQUENCY=5180" not in sig: raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig)) if "WIDTH=80 MHz" not in sig: raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig)) est = dev[0].get_bss(bssid)['est_throughput'] if est != "390001": raise Exception("Unexpected BSS est_throughput: " + est) status = dev[0].get_status() if status["ieee80211ac"] != "1": raise Exception("Unexpected STATUS ieee80211ac value (STA)") status = hapd.get_status() logger.info("hostapd STATUS: " + str(status)) if status["ieee80211n"] != "1": raise Exception("Unexpected STATUS ieee80211n value") if status["ieee80211ac"] != "1": raise Exception("Unexpected STATUS ieee80211ac value") if status["secondary_channel"] != "1": raise Exception("Unexpected STATUS secondary_channel value") if status["vht_oper_chwidth"] != "1": raise Exception("Unexpected STATUS vht_oper_chwidth value") if status["vht_oper_centr_freq_seg0_idx"] != "42": raise Exception("Unexpected STATUS vht_oper_centr_freq_seg0_idx value") if "vht_caps_info" not in status: raise Exception("Missing vht_caps_info") sta = hapd.get_sta(dev[0].own_addr()) logger.info("hostapd STA: " + str(sta)) if "[HT]" not in sta['flags']: raise Exception("Missing STA flag: HT") if "[VHT]" not in sta['flags']: raise Exception("Missing STA flag: VHT") except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80 MHz channel not supported in regulatory information") raise finally: dev[0].request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev[0].flush_scan_cache() def vht80_test(apdev, dev, channel, ht_capab): clear_scan_cache(apdev) try: hapd = None params = { "ssid": "vht", "country_code": "FI", "hw_mode": "a", "channel": str(channel), "ht_capab": ht_capab, "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "1", "vht_oper_centr_freq_seg0_idx": "42" } hapd = hostapd.add_ap(apdev, params) bssid = apdev['bssid'] dev.connect("vht", key_mgmt="NONE", scan_freq=str(5000 + 5 * channel)) hwsim_utils.test_connectivity(dev, hapd) except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80 MHz channel not supported in regulatory information") raise finally: dev.request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev.flush_scan_cache() def test_ap_vht80b(dev, apdev): """VHT with 80 MHz channel width (HT40- channel 40)""" vht80_test(apdev[0], dev[0], 40, "[HT40-]") def test_ap_vht80c(dev, apdev): """VHT with 80 MHz channel width (HT40+ channel 44)""" vht80_test(apdev[0], dev[0], 44, "[HT40+]") def test_ap_vht80d(dev, apdev): """VHT with 80 MHz channel width (HT40- channel 48)""" vht80_test(apdev[0], dev[0], 48, "[HT40-]") def test_ap_vht80_params(dev, apdev): """VHT with 80 MHz channel width and number of optional features enabled""" try: hapd = None params = { "ssid": "vht", "country_code": "FI", "hw_mode": "a", "channel": "36", "ht_capab": "[HT40+][SHORT-GI-40][DSS_CCK-40]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "1", "vht_capab": "[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][MAX-A-MPDU-LEN-EXP0]", "vht_oper_centr_freq_seg0_idx": "42", "require_vht": "1" } hapd = hostapd.add_ap(apdev[0], params) dev[1].connect("vht", key_mgmt="NONE", scan_freq="5180", disable_vht="1", wait_connect=False) dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180") ev = dev[1].wait_event(["CTRL-EVENT-ASSOC-REJECT"]) if ev is None: raise Exception("Association rejection timed out") if "status_code=104" not in ev: raise Exception("Unexpected rejection status code") dev[1].request("DISCONNECT") hwsim_utils.test_connectivity(dev[0], hapd) except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80 MHz channel not supported in regulatory information") raise finally: dev[0].request("DISCONNECT") dev[1].request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev[0].flush_scan_cache() dev[1].flush_scan_cache() def test_ap_vht80_invalid(dev, apdev): """VHT with invalid 80 MHz channel configuration (seg1)""" try: hapd = None params = { "ssid": "vht", "country_code": "US", "hw_mode": "a", "channel": "36", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "1", "vht_oper_centr_freq_seg0_idx": "42", "vht_oper_centr_freq_seg1_idx": "155", 'ieee80211d': '1', 'ieee80211h': '1' } hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) # This fails due to unexpected seg1 configuration ev = hapd.wait_event(["AP-DISABLED"], timeout=5) if ev is None: raise Exception("AP-DISABLED not reported") except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80/160 MHz channel not supported in regulatory information") raise finally: if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) def test_ap_vht80_invalid2(dev, apdev): """VHT with invalid 80 MHz channel configuration (seg0)""" try: hapd = None params = { "ssid": "vht", "country_code": "US", "hw_mode": "a", "channel": "36", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "1", "vht_oper_centr_freq_seg0_idx": "46", 'ieee80211d': '1', 'ieee80211h': '1' } hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) # This fails due to invalid seg0 configuration ev = hapd.wait_event(["AP-DISABLED"], timeout=5) if ev is None: raise Exception("AP-DISABLED not reported") except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80/160 MHz channel not supported in regulatory information") raise finally: if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) def test_ap_vht_20(devs, apdevs): """VHT and 20 MHz channel""" dev = devs[0] ap = apdevs[0] try: hapd = None params = { "ssid": "test-vht20", "country_code": "DE", "hw_mode": "a", "channel": "36", "ieee80211n": "1", "ieee80211ac": "1", "ht_capab": "", "vht_capab": "", "vht_oper_chwidth": "0", "vht_oper_centr_freq_seg0_idx": "0", "supported_rates": "60 120 240 360 480 540", "require_vht": "1", } hapd = hostapd.add_ap(ap, params) dev.connect("test-vht20", scan_freq="5180", key_mgmt="NONE") hwsim_utils.test_connectivity(dev, hapd) finally: dev.request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev.flush_scan_cache() def test_ap_vht_40(devs, apdevs): """VHT and 40 MHz channel""" dev = devs[0] ap = apdevs[0] try: hapd = None params = { "ssid": "test-vht40", "country_code": "DE", "hw_mode": "a", "channel": "36", "ieee80211n": "1", "ieee80211ac": "1", "ht_capab": "[HT40+]", "vht_capab": "", "vht_oper_chwidth": "0", "vht_oper_centr_freq_seg0_idx": "0", } hapd = hostapd.add_ap(ap, params) dev.connect("test-vht40", scan_freq="5180", key_mgmt="NONE") hwsim_utils.test_connectivity(dev, hapd) finally: dev.request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev.flush_scan_cache() def test_ap_vht_capab_not_supported(dev, apdev): """VHT configuration with driver not supporting all vht_capab entries""" try: params = { "ssid": "vht", "country_code": "FI", "hw_mode": "a", "channel": "36", "ht_capab": "[HT40+][SHORT-GI-40][DSS_CCK-40]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "1", "vht_capab": "[MAX-MPDU-7991][MAX-MPDU-11454][VHT160][VHT160-80PLUS80][RXLDPC][SHORT-GI-80][SHORT-GI-160][TX-STBC-2BY1][RX-STBC-1][RX-STBC-12][RX-STBC-123][RX-STBC-1234][SU-BEAMFORMER][SU-BEAMFORMEE][BF-ANTENNA-2][BF-ANTENNA-3][BF-ANTENNA-4][SOUNDING-DIMENSION-2][SOUNDING-DIMENSION-3][SOUNDING-DIMENSION-4][MU-BEAMFORMER][VHT-TXOP-PS][HTC-VHT][MAX-A-MPDU-LEN-EXP0][MAX-A-MPDU-LEN-EXP7][VHT-LINK-ADAPT2][VHT-LINK-ADAPT3][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN]", "vht_oper_centr_freq_seg0_idx": "42", "require_vht": "1" } hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) ev = hapd.wait_event(["AP-DISABLED"], timeout=5) if ev is None: raise Exception("Startup failure not reported") for i in range(1, 7): if "OK" not in hapd.request("SET vht_capab [MAX-A-MPDU-LEN-EXP%d]" % i): raise Exception("Unexpected SET failure") finally: subprocess.call(['iw', 'reg', 'set', '00']) def test_ap_vht160(dev, apdev): """VHT with 160 MHz channel width (1)""" try: hapd = None params = { "ssid": "vht", "country_code": "FI", "hw_mode": "a", "channel": "36", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "2", "vht_oper_centr_freq_seg0_idx": "50", 'ieee80211d': '1', 'ieee80211h': '1' } hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) ev = wait_dfs_event(hapd, "DFS-CAC-START", 5) if "DFS-CAC-START" not in ev: raise Exception("Unexpected DFS event") state = hapd.get_status_field("state") if state != "DFS": if state == "DISABLED" and not os.path.exists("dfs"): # Not all systems have recent enough CRDA version and # wireless-regdb changes to support 160 MHz and DFS. For now, # do not report failures for this test case. raise HwsimSkip("CRDA or wireless-regdb did not support 160 MHz") raise Exception("Unexpected interface state: " + state) logger.info("Waiting for CAC to complete") ev = wait_dfs_event(hapd, "DFS-CAC-COMPLETED", 70) if "success=1" not in ev: raise Exception("CAC failed") if "freq=5180" not in ev: raise Exception("Unexpected DFS freq result") ev = hapd.wait_event(["AP-ENABLED"], timeout=5) if not ev: raise Exception("AP setup timed out") state = hapd.get_status_field("state") if state != "ENABLED": raise Exception("Unexpected interface state") dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180") hwsim_utils.test_connectivity(dev[0], hapd) sig = dev[0].request("SIGNAL_POLL").splitlines() if "FREQUENCY=5180" not in sig: raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig)) if "WIDTH=160 MHz" not in sig: raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig)) except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80/160 MHz channel not supported in regulatory information") raise finally: dev[0].request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev[0].flush_scan_cache() def test_ap_vht160b(dev, apdev): """VHT with 160 MHz channel width (2)""" try: hapd = None params = { "ssid": "vht", "country_code": "FI", "hw_mode": "a", "channel": "104", "ht_capab": "[HT40-]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "2", "vht_oper_centr_freq_seg0_idx": "114", 'ieee80211d': '1', 'ieee80211h': '1' } hapd = hostapd.add_ap(apdev[1], params, wait_enabled=False) ev = wait_dfs_event(hapd, "DFS-CAC-START", 5) if "DFS-CAC-START" not in ev: raise Exception("Unexpected DFS event(2)") state = hapd.get_status_field("state") if state != "DFS": if state == "DISABLED" and not os.path.exists("dfs"): # Not all systems have recent enough CRDA version and # wireless-regdb changes to support 160 MHz and DFS. For now, # do not report failures for this test case. raise HwsimSkip("CRDA or wireless-regdb did not support 160 MHz") raise Exception("Unexpected interface state: " + state) logger.info("Waiting for CAC to complete") ev = wait_dfs_event(hapd, "DFS-CAC-COMPLETED", 70) if "success=1" not in ev: raise Exception("CAC failed(2)") if "freq=5520" not in ev: raise Exception("Unexpected DFS freq result(2)") ev = hapd.wait_event(["AP-ENABLED"], timeout=5) if not ev: raise Exception("AP setup timed out(2)") state = hapd.get_status_field("state") if state != "ENABLED": raise Exception("Unexpected interface state(2)") freq = hapd.get_status_field("freq") if freq != "5520": raise Exception("Unexpected frequency(2)") dev[0].connect("vht", key_mgmt="NONE", scan_freq="5520") hwsim_utils.test_connectivity(dev[0], hapd) sig = dev[0].request("SIGNAL_POLL").splitlines() if "FREQUENCY=5520" not in sig: raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig)) if "WIDTH=160 MHz" not in sig: raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig)) except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80/160 MHz channel not supported in regulatory information") raise finally: dev[0].request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev[0].flush_scan_cache() def test_ap_vht160_no_dfs_100_plus(dev, apdev): """VHT with 160 MHz channel width and no DFS (100 plus)""" run_ap_vht160_no_dfs(dev, apdev, "100", "[HT40+]") def test_ap_vht160_no_dfs(dev, apdev): """VHT with 160 MHz channel width and no DFS (104 minus)""" run_ap_vht160_no_dfs(dev, apdev, "104", "[HT40-]") def test_ap_vht160_no_dfs_108_plus(dev, apdev): """VHT with 160 MHz channel width and no DFS (108 plus)""" run_ap_vht160_no_dfs(dev, apdev, "108", "[HT40+]") def test_ap_vht160_no_dfs_112_minus(dev, apdev): """VHT with 160 MHz channel width and no DFS (112 minus)""" run_ap_vht160_no_dfs(dev, apdev, "112", "[HT40-]") def test_ap_vht160_no_dfs_116_plus(dev, apdev): """VHT with 160 MHz channel width and no DFS (116 plus)""" run_ap_vht160_no_dfs(dev, apdev, "116", "[HT40+]") def test_ap_vht160_no_dfs_120_minus(dev, apdev): """VHT with 160 MHz channel width and no DFS (120 minus)""" run_ap_vht160_no_dfs(dev, apdev, "120", "[HT40-]") def test_ap_vht160_no_dfs_124_plus(dev, apdev): """VHT with 160 MHz channel width and no DFS (124 plus)""" run_ap_vht160_no_dfs(dev, apdev, "124", "[HT40+]") def test_ap_vht160_no_dfs_128_minus(dev, apdev): """VHT with 160 MHz channel width and no DFS (128 minus)""" run_ap_vht160_no_dfs(dev, apdev, "128", "[HT40-]") def run_ap_vht160_no_dfs(dev, apdev, channel, ht_capab): try: hapd = None params = { "ssid": "vht", "country_code": "ZA", "hw_mode": "a", "channel": channel, "ht_capab": ht_capab, "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "2", "vht_oper_centr_freq_seg0_idx": "114", 'ieee80211d': '1', 'ieee80211h': '1' } hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) ev = hapd.wait_event(["AP-ENABLED"], timeout=2) if not ev: cmd = subprocess.Popen(["iw", "reg", "get"], stdout=subprocess.PIPE) reg = cmd.stdout.readlines() for r in reg: if "5490" in r and "DFS" in r: raise HwsimSkip("ZA regulatory rule did not have DFS requirement removed") raise Exception("AP setup timed out") freq = str(int(channel) * 5 + 5000) dev[0].connect("vht", key_mgmt="NONE", scan_freq=freq) hwsim_utils.test_connectivity(dev[0], hapd) sig = dev[0].request("SIGNAL_POLL").splitlines() if "FREQUENCY=" + freq not in sig: raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig)) if "WIDTH=160 MHz" not in sig: raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig)) except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80/160 MHz channel not supported in regulatory information") raise finally: dev[0].request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev[0].flush_scan_cache() def test_ap_vht160_no_ht40(dev, apdev): """VHT with 160 MHz channel width and HT40 disabled""" try: hapd = None params = { "ssid": "vht", "country_code": "ZA", "hw_mode": "a", "channel": "108", "ht_capab": "", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "2", "vht_oper_centr_freq_seg0_idx": "114", 'ieee80211d': '1', 'ieee80211h': '1' } hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) ev = hapd.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=2) if not ev: cmd = subprocess.Popen(["iw", "reg", "get"], stdout=subprocess.PIPE) reg = cmd.stdout.readlines() for r in reg: if "5490" in r and "DFS" in r: raise HwsimSkip("ZA regulatory rule did not have DFS requirement removed") raise Exception("AP setup timed out") if "AP-ENABLED" in ev: # This was supposed to fail due to sec_channel_offset == 0 raise Exception("Unexpected AP-ENABLED") except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80/160 MHz channel not supported in regulatory information") raise finally: if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) def test_ap_vht80plus80(dev, apdev): """VHT with 80+80 MHz channel width""" try: hapd = None hapd2 = None params = { "ssid": "vht", "country_code": "US", "hw_mode": "a", "channel": "52", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "3", "vht_oper_centr_freq_seg0_idx": "58", "vht_oper_centr_freq_seg1_idx": "155", 'ieee80211d': '1', 'ieee80211h': '1' } hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) # This will actually fail since DFS on 80+80 is not yet supported ev = hapd.wait_event(["AP-DISABLED"], timeout=5) # ignore result to avoid breaking the test once 80+80 DFS gets enabled params = { "ssid": "vht2", "country_code": "US", "hw_mode": "a", "channel": "36", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "3", "vht_oper_centr_freq_seg0_idx": "42", "vht_oper_centr_freq_seg1_idx": "155" } hapd2 = hostapd.add_ap(apdev[1], params, wait_enabled=False) ev = hapd2.wait_event(["AP-ENABLED", "AP-DISABLED"], timeout=5) if not ev: raise Exception("AP setup timed out(2)") if "AP-DISABLED" in ev: # Assume this failed due to missing regulatory update for now raise HwsimSkip("80+80 MHz channel not supported in regulatory information") state = hapd2.get_status_field("state") if state != "ENABLED": raise Exception("Unexpected interface state(2)") dev[1].connect("vht2", key_mgmt="NONE", scan_freq="5180") hwsim_utils.test_connectivity(dev[1], hapd2) sig = dev[1].request("SIGNAL_POLL").splitlines() if "FREQUENCY=5180" not in sig: raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig)) if "WIDTH=80+80 MHz" not in sig: raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig)) if "CENTER_FRQ1=5210" not in sig: raise Exception("Unexpected SIGNAL_POLL value(3): " + str(sig)) if "CENTER_FRQ2=5775" not in sig: raise Exception("Unexpected SIGNAL_POLL value(4): " + str(sig)) except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80/160 MHz channel not supported in regulatory information") raise finally: dev[0].request("DISCONNECT") dev[1].request("DISCONNECT") if hapd: hapd.request("DISABLE") if hapd2: hapd2.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev[0].flush_scan_cache() dev[1].flush_scan_cache() def test_ap_vht80plus80_invalid(dev, apdev): """VHT with invalid 80+80 MHz channel""" try: hapd = None params = { "ssid": "vht", "country_code": "US", "hw_mode": "a", "channel": "36", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "3", "vht_oper_centr_freq_seg0_idx": "42", "vht_oper_centr_freq_seg1_idx": "0", 'ieee80211d': '1', 'ieee80211h': '1' } hapd = hostapd.add_ap(apdev[0], params, wait_enabled=False) # This fails due to missing(invalid) seg1 configuration ev = hapd.wait_event(["AP-DISABLED"], timeout=5) if ev is None: raise Exception("AP-DISABLED not reported") except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80/160 MHz channel not supported in regulatory information") raise finally: if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) def test_ap_vht80_csa(dev, apdev): """VHT with 80 MHz channel width and CSA""" csa_supported(dev[0]) try: hapd = None params = { "ssid": "vht", "country_code": "US", "hw_mode": "a", "channel": "149", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "1", "vht_oper_centr_freq_seg0_idx": "155" } hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("vht", key_mgmt="NONE", scan_freq="5745") hwsim_utils.test_connectivity(dev[0], hapd) hapd.request("CHAN_SWITCH 5 5180 ht vht blocktx center_freq1=5210 sec_channel_offset=1 bandwidth=80") ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10) if ev is None: raise Exception("CSA finished event timed out") if "freq=5180" not in ev: raise Exception("Unexpected channel in CSA finished event") time.sleep(0.5) hwsim_utils.test_connectivity(dev[0], hapd) hapd.request("CHAN_SWITCH 5 5745") ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10) if ev is None: raise Exception("CSA finished event timed out") if "freq=5745" not in ev: raise Exception("Unexpected channel in CSA finished event") time.sleep(0.5) hwsim_utils.test_connectivity(dev[0], hapd) # This CSA to same channel will fail in kernel, so use this only for # extra code coverage. hapd.request("CHAN_SWITCH 5 5745") hapd.wait_event(["AP-CSA-FINISHED"], timeout=1) except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80 MHz channel not supported in regulatory information") raise finally: dev[0].request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev[0].flush_scan_cache() def test_ap_vht_csa_vht40(dev, apdev): """VHT CSA with VHT40 getting enabled""" csa_supported(dev[0]) try: hapd = None params = { "ssid": "vht", "country_code": "US", "hw_mode": "a", "channel": "149", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "0" } hapd = hostapd.add_ap(apdev[0], params) bssid = hapd.own_addr() dev[0].connect("vht", key_mgmt="NONE", scan_freq="5745") hwsim_utils.test_connectivity(dev[0], hapd) hapd.request("CHAN_SWITCH 5 5765 sec_channel_offset=-1 center_freq1=5755 bandwidth=40 vht") ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10) if ev is None: raise Exception("CSA finished event timed out") if "freq=5765" not in ev: raise Exception("Unexpected channel in CSA finished event") ev = dev[0].wait_event("CTRL-EVENT-CHANNEL-SWITCH", timeout=5) if ev is None: raise Exception("Channel switch event not seen") if "freq=5765" not in ev: raise Exception("Channel mismatch: " + ev) time.sleep(0.5) hwsim_utils.test_connectivity(dev[0], hapd) dev[1].connect("vht", key_mgmt="NONE", scan_freq="5765") hwsim_utils.test_connectivity(dev[1], hapd) if dev[1].get_status_field("ieee80211ac") != '1': raise Exception("VHT not enabled as part of channel switch") finally: dev[0].request("DISCONNECT") dev[1].request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev[0].flush_scan_cache() dev[1].flush_scan_cache() def test_ap_vht_csa_vht20(dev, apdev): """VHT CSA with VHT20 getting enabled""" csa_supported(dev[0]) try: hapd = None params = { "ssid": "vht", "country_code": "US", "hw_mode": "a", "channel": "149", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "0" } hapd = hostapd.add_ap(apdev[0], params) bssid = hapd.own_addr() dev[0].connect("vht", key_mgmt="NONE", scan_freq="5745") hwsim_utils.test_connectivity(dev[0], hapd) hapd.request("CHAN_SWITCH 5 5200 center_freq1=5200 bandwidth=20 vht") ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10) if ev is None: raise Exception("CSA finished event timed out") if "freq=5200" not in ev: raise Exception("Unexpected channel in CSA finished event") time.sleep(0.5) hwsim_utils.test_connectivity(dev[0], hapd) dev[1].connect("vht", key_mgmt="NONE", scan_freq="5200") hwsim_utils.test_connectivity(dev[1], hapd) if dev[1].get_status_field("ieee80211ac") != '1': raise Exception("VHT not enabled as part of channel switch") finally: dev[0].request("DISCONNECT") dev[1].request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev[0].flush_scan_cache() dev[1].flush_scan_cache() def test_ap_vht_csa_vht40_disable(dev, apdev): """VHT CSA with VHT40 getting disabled""" csa_supported(dev[0]) try: hapd = None params = { "ssid": "vht", "country_code": "US", "hw_mode": "a", "channel": "149", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "1", "vht_capab": "", "vht_oper_chwidth": "0", "vht_oper_centr_freq_seg0_idx": "0" } hapd = hostapd.add_ap(apdev[0], params) bssid = hapd.own_addr() dev[0].connect("vht", key_mgmt="NONE", scan_freq="5745") hwsim_utils.test_connectivity(dev[0], hapd) hapd.request("CHAN_SWITCH 5 5200 center_freq1=5200 bandwidth=40 ht") ev = hapd.wait_event(["AP-CSA-FINISHED"], timeout=10) if ev is None: raise Exception("CSA finished event timed out") if "freq=5200" not in ev: raise Exception("Unexpected channel in CSA finished event") ev = dev[0].wait_event("CTRL-EVENT-CHANNEL-SWITCH", timeout=5) if ev is None: raise Exception("Channel switch event not seen") if "freq=5200" not in ev: raise Exception("Channel mismatch: " + ev) time.sleep(0.5) hwsim_utils.test_connectivity(dev[0], hapd) dev[1].connect("vht", key_mgmt="NONE", scan_freq="5200") hwsim_utils.test_connectivity(dev[1], hapd) if dev[1].get_status_field("ieee80211ac") == '1': raise Exception("VHT not disabled as part of channel switch") finally: dev[0].request("DISCONNECT") dev[1].request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev[0].flush_scan_cache() dev[1].flush_scan_cache() def test_ap_vht_on_24ghz(dev, apdev): """Subset of VHT features on 2.4 GHz""" hapd = None params = { "ssid": "test-vht-2g", "hw_mode": "g", "channel": "1", "ieee80211n": "1", "vendor_vht": "1", "vht_capab": "[MAX-MPDU-11454]", "vht_oper_chwidth": "0", "vht_oper_centr_freq_seg0_idx": "1" } hapd = hostapd.add_ap(apdev[0], params) try: if "OK" not in dev[0].request("VENDOR_ELEM_ADD 13 dd1300904c0400bf0c3240820feaff0000eaff0000"): raise Exception("Failed to add vendor element") dev[0].connect("test-vht-2g", scan_freq="2412", key_mgmt="NONE") hwsim_utils.test_connectivity(dev[0], hapd) sta = hapd.get_sta(dev[0].own_addr()) if '[VENDOR_VHT]' not in sta['flags']: raise Exception("No VENDOR_VHT STA flag") dev[1].connect("test-vht-2g", scan_freq="2412", key_mgmt="NONE") sta = hapd.get_sta(dev[1].own_addr()) if '[VENDOR_VHT]' in sta['flags']: raise Exception("Unexpected VENDOR_VHT STA flag") finally: dev[0].request("VENDOR_ELEM_REMOVE 13 *") def test_prefer_vht40(dev, apdev): """Preference on VHT40 over HT40""" try: hapd2 = None params = { "ssid": "test", "country_code": "FI", "hw_mode": "a", "channel": "36", "ieee80211n": "1", "ht_capab": "[HT40+]" } hapd = hostapd.add_ap(apdev[0], params) bssid = apdev[0]['bssid'] params = { "ssid": "test", "country_code": "FI", "hw_mode": "a", "channel": "36", "ieee80211n": "1", "ieee80211ac": "1", "ht_capab": "[HT40+]", "vht_capab": "", "vht_oper_chwidth": "0", "vht_oper_centr_freq_seg0_idx": "0", } hapd2 = hostapd.add_ap(apdev[1], params) bssid2 = apdev[1]['bssid'] dev[0].scan_for_bss(bssid, freq=5180) dev[0].scan_for_bss(bssid2, freq=5180) dev[0].connect("test", scan_freq="5180", key_mgmt="NONE") if dev[0].get_status_field('bssid') != bssid2: raise Exception("Unexpected BSS selected") est = dev[0].get_bss(bssid)['est_throughput'] if est != "135000": raise Exception("Unexpected BSS0 est_throughput: " + est) est = dev[0].get_bss(bssid2)['est_throughput'] if est != "135001": raise Exception("Unexpected BSS1 est_throughput: " + est) finally: dev[0].request("DISCONNECT") if hapd2: hapd2.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev[0].flush_scan_cache() def test_ap_vht80_pwr_constraint(dev, apdev): """VHT with 80 MHz channel width and local power constraint""" hapd = None try: params = { "ssid": "vht", "country_code": "FI", "hw_mode": "a", "channel": "36", "ht_capab": "[HT40+]", "ieee80211d": "1", "local_pwr_constraint": "3", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "1", "vht_oper_centr_freq_seg0_idx": "42" } hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180") except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80 MHz channel not supported in regulatory information") raise finally: dev[0].request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev[0].flush_scan_cache() def test_ap_vht_use_sta_nsts(dev, apdev): """VHT with 80 MHz channel width and use_sta_nsts=1""" try: hapd = None params = { "ssid": "vht", "country_code": "FI", "hw_mode": "a", "channel": "36", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "1", "vht_oper_centr_freq_seg0_idx": "42", "use_sta_nsts": "1" } hapd = hostapd.add_ap(apdev[0], params) bssid = apdev[0]['bssid'] dev[0].connect("vht", key_mgmt="NONE", scan_freq="5180") hwsim_utils.test_connectivity(dev[0], hapd) except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80 MHz channel not supported in regulatory information") raise finally: dev[0].request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev[0].flush_scan_cache() def test_ap_vht_tkip(dev, apdev): """VHT and TKIP""" try: hapd = None params = { "ssid": "vht", "wpa": "1", "wpa_key_mgmt": "WPA-PSK", "wpa_pairwise": "TKIP", "wpa_passphrase": "12345678", "country_code": "FI", "hw_mode": "a", "channel": "36", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "1", "vht_oper_centr_freq_seg0_idx": "42" } hapd = hostapd.add_ap(apdev[0], params) bssid = apdev[0]['bssid'] dev[0].connect("vht", psk="12345678", scan_freq="5180") hwsim_utils.test_connectivity(dev[0], hapd) sig = dev[0].request("SIGNAL_POLL").splitlines() if "FREQUENCY=5180" not in sig: raise Exception("Unexpected SIGNAL_POLL value(1): " + str(sig)) if "WIDTH=20 MHz (no HT)" not in sig: raise Exception("Unexpected SIGNAL_POLL value(2): " + str(sig)) status = hapd.get_status() logger.info("hostapd STATUS: " + str(status)) if status["ieee80211n"] != "0": raise Exception("Unexpected STATUS ieee80211n value") if status["ieee80211ac"] != "0": raise Exception("Unexpected STATUS ieee80211ac value") if status["secondary_channel"] != "0": raise Exception("Unexpected STATUS secondary_channel value") except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80 MHz channel not supported in regulatory information") raise finally: dev[0].request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev[0].flush_scan_cache() def test_ap_vht_40_fallback_to_20(devs, apdevs): """VHT and 40 MHz channel configuration falling back to 20 MHz""" dev = devs[0] ap = apdevs[0] try: hapd = None params = { "ssid": "test-vht40", "country_code": "US", "hw_mode": "a", "basic_rates": "60 120 240", "channel": "161", "ieee80211d": "1", "ieee80211h": "1", "ieee80211n": "1", "ieee80211ac": "1", "ht_capab": "[HT40+][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]", "vht_capab": "[RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC1][MAX-MPDU-11454][MAX-A-MPDU-LEN-EXP7]", "vht_oper_chwidth": "0", "vht_oper_centr_freq_seg0_idx": "155", } hapd = hostapd.add_ap(ap, params) dev.connect("test-vht40", scan_freq="5805", key_mgmt="NONE") hwsim_utils.test_connectivity(dev, hapd) finally: dev.request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev.flush_scan_cache() def test_ap_vht80_to_24g_ht(dev, apdev): """VHT with 80 MHz channel width reconfigured to 2.4 GHz HT""" try: hapd = None params = { "ssid": "vht", "country_code": "FI", "hw_mode": "a", "channel": "36", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "1", "vht_capab": "[MAX-MPDU-11454]", "vht_oper_centr_freq_seg0_idx": "42" } hapd = hostapd.add_ap(apdev[0], params) bssid = apdev[0]['bssid'] hapd.disable() hapd.set("ieee80211ac", "0") hapd.set("hw_mode", "g") hapd.set("channel", "1") hapd.set("ht_capab", "") hapd.set("vht_capab", "") hapd.enable() dev[0].connect("vht", key_mgmt="NONE", scan_freq="2412") except Exception, e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80 MHz channel not supported in regulatory information") raise finally: dev[0].request("DISCONNECT") if hapd: hapd.request("DISABLE") subprocess.call(['iw', 'reg', 'set', '00']) dev[0].flush_scan_cache()