# Radio measurement # Copyright(c) 2013 - 2016 Intel Mobile Communications GmbH. # Copyright(c) 2011 - 2016 Intel Corporation. All rights reserved. # Copyright (c) 2017, Jouni Malinen # # This software may be distributed under the terms of the BSD license. # See README for more details. import binascii import re import logging logger = logging.getLogger() import struct import subprocess import time import hostapd from wpasupplicant import WpaSupplicant from utils import * from remotehost import remote_compatible def check_rrm_support(dev): rrm = int(dev.get_driver_status_field("capa.rrm_flags"), 16) if rrm & 0x5 != 0x5 and rrm & 0x10 != 0x10: raise HwsimSkip("Required RRM capabilities are not supported") def check_tx_power_support(dev): rrm = int(dev.get_driver_status_field("capa.rrm_flags"), 16) if rrm & 0x8 != 0x8: raise HwsimSkip("Required RRM capabilities are not supported") nr = "00112233445500000000510107" lci = "01000800101298c0b512926666f6c2f1001c00004104050000c00012" civic = "01000b0011223344556677889900998877665544332211aabbccddeeff" def check_nr_results(dev, bssids=None, lci=False, civic=False): if bssids is None: ev = dev.wait_event(["RRM-NEIGHBOR-REP-REQUEST-FAILED"], timeout=10) if ev is None: raise Exception("RRM neighbor report failure not received") return received = [] for bssid in bssids: ev = dev.wait_event(["RRM-NEIGHBOR-REP-RECEIVED"], timeout=10) if ev is None: raise Exception("RRM report result not indicated") received.append(ev) for bssid in bssids: found = False for r in received: if "RRM-NEIGHBOR-REP-RECEIVED bssid=" + bssid in r: if lci and "lci=" not in r: raise Exception("LCI data not reported for %s" % bssid) if civic and "civic=" not in r: raise Exception("civic data not reported for %s" % bssid) received.remove(r) found = True break if not found: raise Exception("RRM report result for %s not indicated" % bssid) def test_rrm_neighbor_db(dev, apdev): """hostapd ctrl_iface SET_NEIGHBOR""" params = {"ssid": "test", "rrm_neighbor_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) params = {"ssid": "test2", "rrm_neighbor_report": "1"} hapd2 = hostapd.add_ap(apdev[1]['ifname'], params) res = hapd.request("SHOW_NEIGHBOR") if len(res.splitlines()) != 1: raise Exception("Unexpected SHOW_NEIGHBOR output(1): " + res) if apdev[0]['bssid'] not in res: raise Exception("Own BSS not visible in SHOW_NEIGHBOR output") if "OK" not in hapd2.request("SET_NEIGHBOR " + res.strip()): raise Exception("Failed to copy neighbor entry to another hostapd") res2 = hapd2.request("SHOW_NEIGHBOR") if len(res2.splitlines()) != 2: raise Exception("Unexpected SHOW_NEIGHBOR output: " + res2) if res not in res2: raise Exception("Copied entry not visible") # Bad BSSID if "FAIL" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:gg ssid=\"test1\" nr=" + nr): raise Exception("Set neighbor succeeded unexpectedly") # Bad SSID if "FAIL" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=test1 nr=" + nr): raise Exception("Set neighbor succeeded unexpectedly") # Bad SSID end if "FAIL" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=\"test1 nr=" + nr): raise Exception("Set neighbor succeeded unexpectedly") # No SSID if "FAIL" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 nr=" + nr): raise Exception("Set neighbor succeeded unexpectedly") # No NR if "FAIL" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=\"test1\""): raise Exception("Set neighbor succeeded unexpectedly") # Odd length of NR if "FAIL" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=\"test1\" nr=" + nr[:-1]): raise Exception("Set neighbor succeeded unexpectedly") # Invalid lci if "FAIL" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=\"test1\" nr=" + nr + " lci=1"): raise Exception("Set neighbor succeeded unexpectedly") # Invalid civic if "FAIL" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=\"test1\" nr=" + nr + " civic=1"): raise Exception("Set neighbor succeeded unexpectedly") # No entry yet in database if "FAIL" not in hapd.request("REMOVE_NEIGHBOR 00:11:22:33:44:55 ssid=\"test1\""): raise Exception("Remove neighbor succeeded unexpectedly") # Add a neighbor entry if "OK" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=\"test1\" nr=" + nr + " lci=" + lci + " civic=" + civic): raise Exception("Set neighbor failed") res = hapd.request("SHOW_NEIGHBOR") if len(res.splitlines()) != 2: raise Exception("Unexpected SHOW_NEIGHBOR output(2): " + res) if apdev[0]['bssid'] not in res: raise Exception("Own BSS not visible in SHOW_NEIGHBOR output") if "00:11:22:33:44:55" not in res: raise Exception("Added BSS not visible in SHOW_NEIGHBOR output") # Another BSSID with the same SSID if "OK" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:56 ssid=\"test1\" nr=" + nr + " lci=" + lci + " civic=" + civic): raise Exception("Set neighbor failed") res = hapd.request("SHOW_NEIGHBOR") if len(res.splitlines()) != 3: raise Exception("Unexpected SHOW_NEIGHBOR output(3): " + res) if apdev[0]['bssid'] not in res: raise Exception("Own BSS not visible in SHOW_NEIGHBOR output") if "00:11:22:33:44:55" not in res: raise Exception("Added BSS not visible in SHOW_NEIGHBOR output") if "00:11:22:33:44:56" not in res: raise Exception("Second added BSS not visible in SHOW_NEIGHBOR output") # Fewer parameters if "OK" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=\"test1\" nr=" + nr): raise Exception("Set neighbor failed") # SSID in hex format if "OK" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=7465737431 nr=" + nr): raise Exception("Set neighbor failed") # With more parameters if "OK" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=\"test1\" nr=" + nr + " civic=" + civic): raise Exception("Set neighbor failed") # With all parameters if "OK" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=\"test1\" nr=" + nr + " lci=" + lci + " civic=" + civic): raise Exception("Set neighbor failed") # Another SSID on the same BSSID if "OK" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=\"test2\" nr=" + nr + " lci=" + lci): raise Exception("Set neighbor failed") if "OK" not in hapd.request("REMOVE_NEIGHBOR 00:11:22:33:44:55 ssid=\"test1\""): raise Exception("Remove neighbor failed") if "OK" not in hapd.request("REMOVE_NEIGHBOR 00:11:22:33:44:56 ssid=\"test1\""): raise Exception("Remove neighbor failed") if "OK" not in hapd.request("REMOVE_NEIGHBOR 00:11:22:33:44:55 ssid=\"test2\""): raise Exception("Remove neighbor failed") # Double remove if "FAIL" not in hapd.request("REMOVE_NEIGHBOR 00:11:22:33:44:55 ssid=\"test1\""): raise Exception("Remove neighbor succeeded unexpectedly") # Stationary AP if "OK" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=\"test3\" nr=" + nr + " lci=" + lci + " civic=" + civic + " stat"): raise Exception("Set neighbor failed") res = hapd.request("SHOW_NEIGHBOR") if len(res.splitlines()) != 2: raise Exception("Unexpected SHOW_NEIGHBOR output(4): " + res) if "00:11:22:33:44:55" not in res or " stat" not in res: raise Exception("Unexpected SHOW_NEIGHBOR output(4b): " + res) if "OK" not in hapd.request("REMOVE_NEIGHBOR 00:11:22:33:44:55 ssid=\"test3\""): raise Exception("Remove neighbor failed") # Add an entry for following REMOVE_NEIGHBOR tests if "OK" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=7465737431 nr=" + nr): raise Exception("Set neighbor failed") # Invalid remove - bad BSSID if "FAIL" not in hapd.request("REMOVE_NEIGHBOR 00:11:22:33:44:5 ssid=\"test1\""): raise Exception("Remove neighbor succeeded unexpectedly") # Invalid remove - bad SSID if "FAIL" not in hapd.request("REMOVE_NEIGHBOR 00:11:22:33:44:55 ssid=\"test1"): raise Exception("Remove neighbor succeeded unexpectedly") # Remove without specifying SSID if "OK" not in hapd.request("REMOVE_NEIGHBOR 00:11:22:33:44:55"): raise Exception("Remove neighbor without SSID failed") res = hapd.request("SHOW_NEIGHBOR") if len(res.splitlines()) != 1: raise Exception("Unexpected SHOW_NEIGHBOR output(5): " + res) if apdev[0]['bssid'] not in res: raise Exception("Own BSS not visible in SHOW_NEIGHBOR output") def test_rrm_neighbor_db_failures(dev, apdev): """hostapd ctrl_iface SET_NEIGHBOR failures""" params = {"ssid": "test", "rrm_neighbor_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) cmd = "SET_NEIGHBOR 00:11:22:33:44:55 ssid=\"test1\" nr=" + nr + " lci=" + lci + " civic=" + civic tests = [(1, "hostapd_neighbor_add"), (1, "wpabuf_dup;hostapd_neighbor_set"), (2, "wpabuf_dup;hostapd_neighbor_set"), (3, "wpabuf_dup;hostapd_neighbor_set")] for count, func in tests: with alloc_fail(hapd, count, func): if "FAIL" not in hapd.request(cmd): raise Exception("Set neighbor succeeded") def test_rrm_neighbor_db_disabled(dev, apdev): """hostapd ctrl_iface SHOW_NEIGHBOR while neighbor report disabled""" params = {"ssid": "test"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) if "FAIL" not in hapd.request("SHOW_NEIGHBOR"): raise Exception("SHOW_NEIGHBOR accepted") def test_rrm_neighbor_rep_req(dev, apdev): """wpa_supplicant ctrl_iface NEIGHBOR_REP_REQUEST""" check_rrm_support(dev[0]) nr1 = "00112233445500000000510107" nr2 = "00112233445600000000510107" nr3 = "dd112233445500000000510107" params = {"ssid": "test", "rnr": "1"} hostapd.add_ap(apdev[0]['ifname'], params) params = {"ssid": "test2", "rrm_neighbor_report": "1", "rnr": "1"} hapd = hostapd.add_ap(apdev[1]['ifname'], params) bssid1 = apdev[1]['bssid'] dev[0].connect("test", key_mgmt="NONE", scan_freq="2412") if "FAIL" not in dev[0].request("NEIGHBOR_REP_REQUEST"): raise Exception("Request succeeded unexpectedly (AP without RRM)") if "FAIL" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=\"abcdef\""): raise Exception("Request succeeded unexpectedly (AP without RRM 2)") dev[0].request("DISCONNECT") dev[0].connect("test2", key_mgmt="NONE", scan_freq="2412") if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST"): raise Exception("Request failed") check_nr_results(dev[0], [bssid1]) if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST lci"): raise Exception("Request failed") check_nr_results(dev[0], [bssid1]) if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST lci civic"): raise Exception("Request failed") check_nr_results(dev[0], [bssid1]) if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=\"test3\""): raise Exception("Request failed") check_nr_results(dev[0]) if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=\"test3\" lci civic"): raise Exception("Request failed") check_nr_results(dev[0]) if "OK" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=\"test3\" nr=" + nr1 + " lci=" + lci + " civic=" + civic): raise Exception("Set neighbor failed") if "OK" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:56 ssid=\"test3\" nr=" + nr2 + " lci=" + lci + " civic=" + civic): raise Exception("Set neighbor failed") if "OK" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:56 ssid=\"test4\" nr=" + nr2 + " lci=" + lci + " civic=" + civic): raise Exception("Set neighbor failed") if "OK" not in hapd.request("SET_NEIGHBOR dd:11:22:33:44:55 ssid=\"test5\" nr=" + nr3 + " lci=" + lci): raise Exception("Set neighbor failed") if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=\"test3\""): raise Exception("Request failed") check_nr_results(dev[0], ["00:11:22:33:44:55", "00:11:22:33:44:56"]) if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=\"test3\" lci"): raise Exception("Request failed") check_nr_results(dev[0], ["00:11:22:33:44:55", "00:11:22:33:44:56"], lci=True) if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=\"test3\" civic"): raise Exception("Request failed") check_nr_results(dev[0], ["00:11:22:33:44:55", "00:11:22:33:44:56"], civic=True) if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=\"test3\" lci civic"): raise Exception("Request failed") check_nr_results(dev[0], ["00:11:22:33:44:55", "00:11:22:33:44:56"], lci=True, civic=True) if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=\"test4\""): raise Exception("Request failed") check_nr_results(dev[0], ["00:11:22:33:44:56"]) if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=\"test4\" lci"): raise Exception("Request failed") check_nr_results(dev[0], ["00:11:22:33:44:56"], lci=True) if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=\"test4\" civic"): raise Exception("Request failed") check_nr_results(dev[0], ["00:11:22:33:44:56"], civic=True) if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=\"test4\" lci civic"): raise Exception("Request failed") check_nr_results(dev[0], ["00:11:22:33:44:56"], lci=True, civic=True) if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=\"test5\""): raise Exception("Request failed") check_nr_results(dev[0], ["dd:11:22:33:44:55"]) if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=\"test5\" lci"): raise Exception("Request failed") check_nr_results(dev[0], ["dd:11:22:33:44:55"], lci=True) if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=\"test5\" civic"): raise Exception("Request failed") check_nr_results(dev[0], ["dd:11:22:33:44:55"]) if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST ssid=\"test5\" lci civic"): raise Exception("Request failed") check_nr_results(dev[0], ["dd:11:22:33:44:55"], lci=True) if "OK" not in hapd.request("UPDATE_BEACON"): raise Exception("UPDATE_BEACON failed") time.sleep(0.2) dev[1].connect("test2", key_mgmt="NONE", scan_freq="2412") def test_rrm_neighbor_rep_oom(dev, apdev): """hostapd neighbor report OOM""" check_rrm_support(dev[0]) nr1 = "00112233445500000000510107" nr2 = "00112233445600000000510107" nr3 = "dd112233445500000000510107" params = {"ssid": "test", "rrm_neighbor_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test", key_mgmt="NONE", scan_freq="2412") with alloc_fail(hapd, 1, "hostapd_send_nei_report_resp"): if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST"): raise Exception("Request failed") ev = dev[0].wait_event(["RRM-NEIGHBOR-REP-REQUEST-FAILED"], timeout=5) if ev is None: raise Exception("Neighbor report failure not reported") def test_rrm_lci_req(dev, apdev): """hostapd lci request""" check_rrm_support(dev[0]) params = {"ssid": "rrm", "rrm_neighbor_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) # station not specified if "FAIL" not in hapd.request("REQ_LCI "): raise Exception("REQ_LCI with no station succeeded unexpectedly") # station that is not connected specified if "FAIL" not in hapd.request("REQ_LCI " + dev[0].own_addr()): raise Exception("REQ_LCI succeeded unexpectedly (station not connected)") dev[0].request("SET LCI ") dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") # station connected without LCI if "FAIL" not in hapd.request("REQ_LCI " + dev[0].own_addr()): raise Exception("REQ_LCI succeeded unexpectedly (station without lci)") dev[0].request("DISCONNECT") dev[0].wait_disconnected(timeout=2) dev[0].request("SET LCI " + lci) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") # station connected with LCI if "OK" not in hapd.request("REQ_LCI " + dev[0].own_addr()): raise Exception("REQ_LCI failed unexpectedly") def test_rrm_lci_req_timeout(dev, apdev): """hostapd lci request timeout""" check_rrm_support(dev[0]) params = {"ssid": "rrm", "rrm_neighbor_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) dev[0].request("SET LCI " + lci) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.set("ext_mgmt_frame_handling", "1") if "OK" not in hapd.request("REQ_LCI " + addr): raise Exception("REQ_LCI failed unexpectedly") ev = hapd.wait_event(["MGMT-RX"], timeout=5) if ev is None: raise Exception("No response seen at the AP") # Ignore response and wait for HOSTAPD_RRM_REQUEST_TIMEOUT time.sleep(5.1) # Process response after timeout if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=%s" % ev.split(' ')[1]): raise Exception("MGMT_RX_PROCESS failed") for i in range(257): if "OK" not in hapd.request("REQ_LCI " + addr): raise Exception("REQ_LCI failed unexpectedly") dev[0].dump_monitor() hapd.dump_monitor() hapd.set("ext_mgmt_frame_handling", "0") dev[0].request("DISCONNECT") dev[0].wait_disconnected() def test_rrm_lci_req_oom(dev, apdev): """LCI report generation OOM""" check_rrm_support(dev[0]) params = {"ssid": "rrm", "rrm_neighbor_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) dev[0].request("SET LCI " + lci) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") with alloc_fail(dev[0], 1, "wpabuf_resize;wpas_rrm_build_lci_report"): if "OK" not in hapd.request("REQ_LCI " + dev[0].own_addr()): raise Exception("REQ_LCI failed unexpectedly") wait_fail_trigger(dev[0], "GET_ALLOC_FAIL") dev[0].request("SET LCI ") # This in in wpas_rrm_build_lci_report(), but backtrace may not always work # for the "reject" label there. with alloc_fail(dev[0], 1, "wpabuf_resize;wpas_rrm_handle_msr_req_element"): if "OK" not in hapd.request("REQ_LCI " + dev[0].own_addr()): raise Exception("REQ_LCI failed unexpectedly") wait_fail_trigger(dev[0], "GET_ALLOC_FAIL") def test_rrm_lci_req_ap_oom(dev, apdev): """LCI report generation AP OOM and failure""" check_rrm_support(dev[0]) params = {"ssid": "rrm", "rrm_neighbor_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) dev[0].request("SET LCI " + lci) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") with alloc_fail(hapd, 1, "wpabuf_alloc;hostapd_send_lci_req"): if "FAIL" not in hapd.request("REQ_LCI " + dev[0].own_addr()): raise Exception("REQ_LCI succeeded during OOM") with fail_test(hapd, 1, "nl80211_send_frame_cmd;hostapd_send_lci_req"): if "FAIL" not in hapd.request("REQ_LCI " + dev[0].own_addr()): raise Exception("REQ_LCI succeeded during failure testing") def test_rrm_lci_req_get_reltime_failure(dev, apdev): """LCI report generation and os_get_reltime() failure""" check_rrm_support(dev[0]) params = {"ssid": "rrm", "rrm_neighbor_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) dev[0].request("SET LCI " + lci) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") with fail_test(dev[0], 1, "os_get_reltime;wpas_rrm_build_lci_report"): if "OK" not in hapd.request("REQ_LCI " + dev[0].own_addr()): raise Exception("REQ_LCI failed unexpectedly") wait_fail_trigger(dev[0], "GET_FAIL") def test_rrm_neighbor_rep_req_from_conf(dev, apdev): """wpa_supplicant ctrl_iface NEIGHBOR_REP_REQUEST and hostapd config""" check_rrm_support(dev[0]) params = {"ssid": "test2", "rrm_neighbor_report": "1", "stationary_ap": "1", "lci": lci, "civic": civic} hapd = hostapd.add_ap(apdev[0]['ifname'], params) bssid = apdev[0]['bssid'] dev[0].connect("test2", key_mgmt="NONE", scan_freq="2412") if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST"): raise Exception("Request failed") check_nr_results(dev[0], [bssid]) def test_rrm_neighbor_rep_req_timeout(dev, apdev): """wpa_supplicant behavior on NEIGHBOR_REP_REQUEST response timeout""" check_rrm_support(dev[0]) params = {"ssid": "test2", "rrm_neighbor_report": "1", "stationary_ap": "1", "lci": lci, "civic": civic} hapd = hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test2", key_mgmt="NONE", scan_freq="2412") hapd.set("ext_mgmt_frame_handling", "1") if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST"): raise Exception("Request failed") msg = hapd.mgmt_rx() if msg is None: raise Exception("Neighbor report request not seen") check_nr_results(dev[0]) def test_rrm_neighbor_rep_req_oom(dev, apdev): """wpa_supplicant ctrl_iface NEIGHBOR_REP_REQUEST OOM""" check_rrm_support(dev[0]) params = {"ssid": "test2", "rrm_neighbor_report": "1", "stationary_ap": "1", "lci": lci, "civic": civic} hapd = hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test2", key_mgmt="NONE", scan_freq="2412") with alloc_fail(dev[0], 1, "wpabuf_alloc;wpas_rrm_process_neighbor_rep"): if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST"): raise Exception("Request failed") wait_fail_trigger(dev[0], "GET_ALLOC_FAIL") with fail_test(dev[0], 1, "wpa_driver_nl80211_send_action;wpas_rrm_send_neighbor_rep_request"): if "FAIL" not in dev[0].request("NEIGHBOR_REP_REQUEST"): raise Exception("Request succeeded unexpectedly") with alloc_fail(dev[0], 1, "wpabuf_alloc;wpas_rrm_send_neighbor_rep_request"): if "FAIL" not in dev[0].request("NEIGHBOR_REP_REQUEST"): raise Exception("Request succeeded unexpectedly") def test_rrm_neighbor_rep_req_disconnect(dev, apdev): """wpa_supplicant behavior on disconnection during NEIGHBOR_REP_REQUEST""" check_rrm_support(dev[0]) params = {"ssid": "test2", "rrm_neighbor_report": "1", "stationary_ap": "1", "lci": lci, "civic": civic} hapd = hostapd.add_ap(apdev[0]['ifname'], params) if "FAIL" not in dev[0].request("NEIGHBOR_REP_REQUEST"): raise Exception("Request accepted while disconnected") dev[0].connect("test2", key_mgmt="NONE", scan_freq="2412") hapd.set("ext_mgmt_frame_handling", "1") if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST"): raise Exception("Request failed") msg = hapd.mgmt_rx() if msg is None: raise Exception("Neighbor report request not seen") dev[0].request("DISCONNECT") check_nr_results(dev[0]) def test_rrm_neighbor_rep_req_not_supported(dev, apdev): """NEIGHBOR_REP_REQUEST for AP not supporting neighbor report""" check_rrm_support(dev[0]) params = {"ssid": "test2", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test2", key_mgmt="NONE", scan_freq="2412") if "FAIL" not in dev[0].request("NEIGHBOR_REP_REQUEST"): raise Exception("Request accepted unexpectedly") def test_rrm_neighbor_rep_req_busy(dev, apdev): """wpa_supplicant and concurrent NEIGHBOR_REP_REQUEST commands""" check_rrm_support(dev[0]) params = {"ssid": "test2", "rrm_neighbor_report": "1", "stationary_ap": "1", "lci": lci, "civic": civic} hapd = hostapd.add_ap(apdev[0]['ifname'], params) dev[0].connect("test2", key_mgmt="NONE", scan_freq="2412") hapd.set("ext_mgmt_frame_handling", "1") if "OK" not in dev[0].request("NEIGHBOR_REP_REQUEST"): raise Exception("Request failed") msg = hapd.mgmt_rx() if msg is None: raise Exception("Neighbor report request not seen") if "FAIL" not in dev[0].request("NEIGHBOR_REP_REQUEST"): raise Exception("Request accepted while disconnected") def test_rrm_ftm_range_req(dev, apdev): """hostapd FTM range request command""" check_rrm_support(dev[0]) try: run_rrm_ftm_range_req(dev, apdev) finally: dev[1].request("VENDOR_ELEM_REMOVE 13 *") def run_rrm_ftm_range_req(dev, apdev): params = {"ssid": "rrm", "rrm_neighbor_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) bssid = hapd.own_addr() # station not specified if "FAIL" not in hapd.request("REQ_RANGE "): raise Exception("REQ_RANGE with no station succeeded unexpectedly") # station that is not connected specified if "FAIL" not in hapd.request("REQ_RANGE " + dev[0].own_addr()): raise Exception("REQ_RANGE succeeded unexpectedly (station not connected)") # No responders specified if "FAIL" not in hapd.request("REQ_RANGE " + dev[0].own_addr() + " 10 10"): raise Exception("REQ_RANGE succeeded unexpectedly (no responder)") # Bad responder address if "FAIL" not in hapd.request("REQ_RANGE " + dev[0].own_addr() + " 10 10 00:11:22:33:44:"): raise Exception("REQ_RANGE succeeded unexpectedly (bad responder address)") # Bad responder address if "FAIL" not in hapd.request("REQ_RANGE " + dev[0].own_addr() + " 10 10 00:11:22:33:44:55 00:11:22:33:44"): raise Exception("REQ_RANGE succeeded unexpectedly (bad responder address 2)") # Bad min_ap value if "FAIL" not in hapd.request("REQ_RANGE " + dev[0].own_addr() + " 10 300 00:11:22:33:44:55"): raise Exception("REQ_RANGE succeeded unexpectedly (invalid min_ap value)") # Bad rand value if "FAIL" not in hapd.request("REQ_RANGE " + dev[0].own_addr() + " -1 10 00:11:22:33:44:55"): raise Exception("REQ_RANGE succeeded unexpectedly (invalid rand value)") if "FAIL" not in hapd.request("REQ_RANGE " + dev[0].own_addr() + " 65536 10 00:11:22:33:44:55"): raise Exception("REQ_RANGE succeeded unexpectedly (invalid rand value)") # Missing min_ap value if "FAIL" not in hapd.request("REQ_RANGE " + dev[0].own_addr() + " 10"): raise Exception("REQ_RANGE succeeded unexpectedly (missing min_ap value)") # Too many responders if "FAIL" not in hapd.request("REQ_RANGE " + dev[0].own_addr() + " 10 10" + 20*" 00:11:22:33:44:55"): raise Exception("REQ_RANGE succeeded unexpectedly (too many responders)") # Wrong min AP count if "FAIL" not in hapd.request("REQ_RANGE " + dev[0].own_addr() + " 10 10 00:11:22:33:44:55"): raise Exception("REQ_RANGE succeeded unexpectedly (responder not in database)") dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") # Override RM capabilities to include FTM range report dev[1].request("VENDOR_ELEM_ADD 13 46057100000004") dev[1].connect("rrm", key_mgmt="NONE", scan_freq="2412") # Request range: Destination address is not connected if "FAIL" not in hapd.request("REQ_RANGE 11:22:33:44:55:66 10 1 00:11:22:33:44:55"): raise Exception("REQ_RANGE succeeded unexpectedly (responder not in database)") # Responder not in database # Note: this check would pass since the station does not support FTM range # request and not because the responder is not in the database. if "FAIL" not in hapd.request("REQ_RANGE " + dev[0].own_addr() + " 10 1 00:11:22:33:44:55"): raise Exception("REQ_RANGE succeeded unexpectedly (responder not in database)") # Missing neighbor report for 00:11:22:33:44:55 if "FAIL" not in hapd.request("REQ_RANGE " + dev[1].own_addr() + " 10 1 00:11:22:33:44:55"): raise Exception("REQ_RANGE succeeded unexpectedly (responder not in database)") # Send request if "OK" not in hapd.request("REQ_RANGE " + dev[1].own_addr() + " 10 1 " + bssid): raise Exception("REQ_RANGE failed unexpectedly") # Too long range request if "FAIL" not in hapd.request("REQ_RANGE " + dev[1].own_addr() + " 10 1" + 16*(" " + bssid)): raise Exception("REQ_RANGE accepted for too long range request") time.sleep(0.1) dev[0].request("DISCONNECT") dev[1].request("DISCONNECT") dev[1].wait_disconnected() def test_rrm_ftm_range_req_timeout(dev, apdev): """hostapd FTM range request timeout""" check_rrm_support(dev[0]) try: run_rrm_ftm_range_req_timeout(dev, apdev) finally: dev[1].request("VENDOR_ELEM_REMOVE 13 *") def run_rrm_ftm_range_req_timeout(dev, apdev): params = {"ssid": "rrm", "rrm_neighbor_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) bssid = hapd.own_addr() # Override RM capabilities to include FTM range report dev[1].request("VENDOR_ELEM_ADD 13 46057100000004") dev[1].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[1].own_addr() hapd.set("ext_mgmt_frame_handling", "1") if "OK" not in hapd.request("REQ_RANGE " + addr + " 10 1 " + bssid): raise Exception("REQ_RANGE failed") ev = hapd.wait_event(["MGMT-RX"], timeout=5) if ev is None: raise Exception("No response seen at the AP") # Ignore response and wait for HOSTAPD_RRM_REQUEST_TIMEOUT time.sleep(5.1) # Process response after timeout if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=%s" % ev.split(' ')[1]): raise Exception("MGMT_RX_PROCESS failed") for i in range(257): if "OK" not in hapd.request("REQ_RANGE " + addr + " 10 1 " + bssid): raise Exception("REQ_RANGE failed") dev[1].dump_monitor() hapd.dump_monitor() hapd.set("ext_mgmt_frame_handling", "0") dev[1].request("DISCONNECT") dev[1].wait_disconnected() def test_rrm_ftm_range_req_failure(dev, apdev): """hostapd FTM range request failure""" check_rrm_support(dev[0]) try: run_rrm_ftm_range_req_failure(dev, apdev) finally: dev[1].request("VENDOR_ELEM_REMOVE 13 *") def run_rrm_ftm_range_req_failure(dev, apdev): params = {"ssid": "rrm", "rrm_neighbor_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) bssid = hapd.own_addr() # Override RM capabilities to include FTM range report dev[1].request("VENDOR_ELEM_ADD 13 46057100000004") dev[1].connect("rrm", key_mgmt="NONE", scan_freq="2412") with alloc_fail(hapd, 1, "wpabuf_alloc;hostapd_send_range_req"): if "FAIL" not in hapd.request("REQ_RANGE " + dev[1].own_addr() + " 10 1 " + bssid): raise Exception("REQ_RANGE succeeded during OOM") with fail_test(hapd, 1, "nl80211_send_frame_cmd;hostapd_send_range_req"): if "FAIL" not in hapd.request("REQ_RANGE " + dev[1].own_addr() + " 10 1 " + bssid): raise Exception("REQ_RANGE succeeded during failure testing") dev[1].request("DISCONNECT") dev[1].wait_disconnected() def test_rrm_ftm_capa_indication(dev, apdev): """FTM capability indication""" try: _test_rrm_ftm_capa_indication(dev, apdev) finally: dev[0].request("SET ftm_initiator 0") dev[0].request("SET ftm_responder 0") def _test_rrm_ftm_capa_indication(dev, apdev): params = {"ssid": "ftm", "ftm_responder": "1", "ftm_initiator": "1",} hapd = hostapd.add_ap(apdev[0]['ifname'], params) if "OK" not in dev[0].request("SET ftm_initiator 1"): raise Exception("could not set ftm_initiator") if "OK" not in dev[0].request("SET ftm_responder 1"): raise Exception("could not set ftm_responder") dev[0].scan_for_bss(apdev[0]['bssid'], freq=2412, force_scan=True) class BeaconReport: def __init__(self, report): self.opclass, self.channel, self.start, self.duration, self.frame_info, self.rcpi, self.rsni = struct.unpack("= 2: eid, elen = struct.unpack('BB', report[0:2]) report = report[2:] if len(report) < elen: raise Exception("Invalid subelement in beacon report") if eid == 1: # Reported Frame Body # Contents depends on the reporting detail request: # 0 = no Reported Frame Body subelement # 1 = all fixed fields and any elements identified in Request # element # 2 = all fixed fields and all elements # Fixed fields: Timestamp[8] BeaconInt[2] CapabInfo[2] self.frame_body = report[0:elen] if eid == 2: self.frame_body_fragment_id = report[0:elen] if eid == 164: self.last_indication = report[0:elen] report = report[elen:] def __str__(self): txt = "opclass={} channel={} start={} duration={} frame_info={} rcpi={} rsni={} bssid={} antenna_id={} parent_tsf={}".format(self.opclass, self.channel, self.start, self.duration, self.frame_info, self.rcpi, self.rsni, self.bssid_str, self.antenna_id, self.parent_tsf) if self.frame_body: txt += " frame_body=" + binascii.hexlify(self.frame_body).decode() if self.frame_body_fragment_id: txt += " fragment_id=" + binascii.hexlify(self.frame_body_fragment_id).decode() if self.last_indication: txt += " last_indication=" + binascii.hexlify(self.last_indication).decode() return txt def build_beacon_request(opclass=81, chan=0, rand_int=0, duration=0, mode=0, bssid="FF:FF:FF:FF:FF:FF"): req = struct.pack("> 7 if i == 0 and more_frags != 1: raise Exception("more fragments bit is not set on first fragment") if i == 1 and more_frags != 0: raise Exception("more fragments bit is set on last fragment") def test_rrm_beacon_req_last_frame_indication(dev, apdev): """Beacon request - beacon table mode - last frame indication""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) hapd2 = hostapd.add_ap(apdev[1], {"ssid": "another"}) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() # The request contains the last beacon report indication subelement req = build_beacon_request(mode=2) token = run_req_beacon(hapd, addr, req + "a40101") for i in range(1, 3): ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report %d response not received" % i) fields = ev.split(' ') if fields[1] != addr: raise Exception("Unexpected STA address in beacon report response: " + fields[1]) if fields[2] != token: raise Exception("Unexpected dialog token in beacon report response: " + fields[2] + " (expected " + token + ")") if fields[3] != "00": raise Exception("Unexpected measurement report mode") report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if not report.last_indication: raise Exception("Last Beacon Report Indication subelement missing") last = binascii.hexlify(report.last_indication).decode() if (i == 2 and last != '01') or (i != 2 and last != '00'): raise Exception("last beacon report indication is not set on last frame") # The request does not contain the last beacon report indication subelement req = build_beacon_request(mode=2) token = run_req_beacon(hapd, addr, req) for i in range(1, 3): ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report %d response not received" % i) fields = ev.split(' ') if fields[1] != addr: raise Exception("Unexpected STA address in beacon report response: " + fields[1]) if fields[2] != token: raise Exception("Unexpected dialog token in beacon report response: " + fields[2] + " (expected " + token + ")") if fields[3] != "00": raise Exception("Unexpected measurement report mode") report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if report.last_indication: raise Exception("Last Beacon Report Indication subelement present but not requested") @remote_compatible def test_rrm_beacon_req_table_detail(dev, apdev): """Beacon request - beacon table mode - reporting detail""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() logger.info("Reporting Detail 0") req = build_beacon_request(mode=2) token = run_req_beacon(hapd, addr, req + "020100") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if report.frame_body: raise Exception("Reported Frame Body subelement included with Reporting Detail 0") hapd.dump_monitor() logger.info("Reporting Detail 1") token = run_req_beacon(hapd, addr, req + "020101") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if not report.frame_body: raise Exception("Reported Frame Body subelement missing") if len(report.frame_body) != 12: raise Exception("Unexpected Reported Frame Body subelement length with Reporting Detail 1") hapd.dump_monitor() logger.info("Reporting Detail 2") token = run_req_beacon(hapd, addr, req + "020102") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if not report.frame_body: raise Exception("Reported Frame Body subelement missing") if len(report.frame_body) <= 12: raise Exception("Unexpected Reported Frame Body subelement length with Reporting Detail 2") hapd.dump_monitor() logger.info("Reporting Detail 3 (invalid)") token = run_req_beacon(hapd, addr, req + "020103") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.2) if ev is not None: raise Exception("Unexpected beacon report response to invalid reporting detail 3") hapd.dump_monitor() logger.info("Reporting Detail (too short)") token = run_req_beacon(hapd, addr, req + "0200") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.2) if ev is not None: raise Exception("Unexpected beacon report response to invalid reporting detail") hapd.dump_monitor() @remote_compatible def test_rrm_beacon_req_table_request(dev, apdev): """Beacon request - beacon table mode - request element""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) dev[0].flush_scan_cache() dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(mode=2) token = run_req_beacon(hapd, addr, req + "020101" + "0a03000106") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if not report.frame_body: raise Exception("Reported Frame Body subelement missing") if len(report.frame_body) != 12 + 5 + 10: raise Exception("Unexpected Reported Frame Body subelement length with Reporting Detail 1 and requested elements SSID + SuppRates") hapd.dump_monitor() logger.info("Incorrect reporting detail with request subelement") token = run_req_beacon(hapd, addr, req + "020102" + "0a03000106") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.2) if ev is not None: raise Exception("Unexpected beacon report response (invalid reporting detail)") hapd.dump_monitor() logger.info("Invalid request subelement length") token = run_req_beacon(hapd, addr, req + "020101" + "0a00") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.2) if ev is not None: raise Exception("Unexpected beacon report response (invalid request subelement length)") hapd.dump_monitor() logger.info("Multiple request subelements") token = run_req_beacon(hapd, addr, req + "020101" + "0a0100" + "0a0101") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.2) if ev is not None: raise Exception("Unexpected beacon report response (multiple request subelements)") hapd.dump_monitor() @remote_compatible def test_rrm_beacon_req_table_request_oom(dev, apdev): """Beacon request - beacon table mode - request element OOM""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(mode=2) with alloc_fail(dev[0], 1, "bitfield_alloc;wpas_rm_handle_beacon_req_subelem"): token = run_req_beacon(hapd, addr, req + "020101" + "0a03000106") wait_fail_trigger(dev[0], "GET_ALLOC_FAIL") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.1) if ev is not None: raise Exception("Unexpected beacon report response received (OOM)") with alloc_fail(dev[0], 1, "wpabuf_alloc;wpas_rrm_send_msr_report_mpdu"): token = run_req_beacon(hapd, addr, req + "020101" + "0a03000106") wait_fail_trigger(dev[0], "GET_ALLOC_FAIL") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.1) if ev is not None: raise Exception("Unexpected beacon report response received (OOM)") with fail_test(dev[0], 1, "wpa_driver_nl80211_send_action;wpas_rrm_send_msr_report_mpdu"): token = run_req_beacon(hapd, addr, req + "020101" + "0a03000106") wait_fail_trigger(dev[0], "GET_ALLOC_FAIL") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.1) if ev is not None: raise Exception("Unexpected beacon report response received (OOM)") with alloc_fail(dev[0], 1, "wpabuf_resize;wpas_add_beacon_rep"): token = run_req_beacon(hapd, addr, req + "020101" + "0a03000106") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received (OOM -> empty report)") fields = ev.split(' ') if len(fields[4]) > 0: raise Exception("Unexpected beacon report received") @remote_compatible def test_rrm_beacon_req_table_bssid(dev, apdev): """Beacon request - beacon table mode - specific BSSID""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) hapd2 = hostapd.add_ap(apdev[1], {"ssid": "another"}) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() bssid2 = hapd2.own_addr() req = build_beacon_request(mode=2, bssid=bssid2) token = run_req_beacon(hapd, addr, req) ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if "bssid=" + bssid2 not in str(report): raise Exception("Report for unexpected BSS") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.1) if ev is not None: raise Exception("Unexpected beacon report response") @remote_compatible def test_rrm_beacon_req_table_ssid(dev, apdev): """Beacon request - beacon table mode - specific SSID""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) hapd2 = hostapd.add_ap(apdev[1], {"ssid": "another"}) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() bssid2 = hapd2.own_addr() req = build_beacon_request(mode=2) token = run_req_beacon(hapd, addr, req + "0007" + binascii.hexlify(b"another").decode()) ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if "bssid=" + bssid2 not in str(report): raise Exception("Report for unexpected BSS") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.1) if ev is not None: raise Exception("Unexpected beacon report response") hapd.dump_monitor() logger.info("Wildcard SSID") token = run_req_beacon(hapd, addr, req + "0000") for i in range(2): ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) hapd.dump_monitor() logger.info("Too long SSID") token = run_req_beacon(hapd, addr, req + "0021" + 33*"00") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.2) if ev is not None: raise Exception("Unexpected beacon report response (invalid SSID subelement in request)") hapd.dump_monitor() @remote_compatible def test_rrm_beacon_req_table_info(dev, apdev): """Beacon request - beacon table mode - Reporting Information subelement""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() logger.info("Unsupported reporting information 1") req = build_beacon_request(mode=2) token = run_req_beacon(hapd, addr, req + "01020100") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response (incapable) is not received") fields = ev.split(' ') if fields[3] != "02": raise Exception("Beacon report response - unexpected mode (" + fields[3] + ")") hapd.dump_monitor() logger.info("Invalid reporting information length") token = run_req_beacon(hapd, addr, req + "010100") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.2) if ev is not None: raise Exception("Unexpected beacon report response (invalid reporting information length)") hapd.dump_monitor() @remote_compatible def test_rrm_beacon_req_table_unknown_subelem(dev, apdev): """Beacon request - beacon table mode - unknown subelement""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(mode=2) token = run_req_beacon(hapd, addr, req + "330101" + "fe00") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) @remote_compatible def test_rrm_beacon_req_table_truncated_subelem(dev, apdev): """Beacon request - beacon table mode - Truncated subelement""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(mode=2) token = run_req_beacon(hapd, addr, req + "0001") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.2) if ev is not None: raise Exception("Unexpected beacon report response (truncated subelement)") hapd.dump_monitor() @remote_compatible def test_rrm_beacon_req_table_rsne(dev, apdev): """Beacon request - beacon table mode - RSNE reporting""" params = hostapd.wpa2_params(ssid="rrm-rsn", passphrase="12345678") params["rrm_beacon_report"] = "1" hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("rrm-rsn", psk="12345678", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(mode=2) token = run_req_beacon(hapd, addr, req + "020101" + "0a0130") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if not report.frame_body: raise Exception("Reported Frame Body subelement missing") if len(report.frame_body) != 12 + 22: raise Exception("Unexpected Reported Frame Body subelement length with Reporting Detail 1 and requested element RSNE") if binascii.unhexlify("30140100000fac040100000fac040100000fac020c00") not in report.frame_body: raise Exception("Full RSNE not found") def test_rrm_beacon_req_table_vht(dev, apdev): """Beacon request - beacon table mode - VHT""" clear_scan_cache(apdev[0]) try: hapd = None params = {"ssid": "rrm-vht", "country_code": "FI", "hw_mode": "a", "channel": "36", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "1", "vht_oper_centr_freq_seg0_idx": "42", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) params = {"ssid": "test-vht40", "country_code": "FI", "hw_mode": "a", "channel": "48", "ieee80211n": "1", "ieee80211ac": "1", "ht_capab": "[HT40-]", "vht_capab": "", "vht_oper_chwidth": "0", "vht_oper_centr_freq_seg0_idx": "0", } hapd2 = hostapd.add_ap(apdev[1], params) dev[0].scan_for_bss(apdev[1]['bssid'], freq=5240) dev[0].connect("rrm-vht", key_mgmt="NONE", scan_freq="5180") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(opclass=240, mode=2) token = run_req_beacon(hapd, addr, req) for i in range(2): ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report %d response not received" % i) fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if report.bssid_str == apdev[0]['bssid']: if report.opclass != 128 or report.channel != 36: raise Exception("Incorrect opclass/channel for AP0") elif report.bssid_str == apdev[1]['bssid']: if report.opclass != 117 or report.channel != 48: raise Exception("Incorrect opclass/channel for AP1") except Exception as e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80 MHz channel not supported in regulatory information") raise finally: dev[0].request("DISCONNECT") disable_hapd(hapd) disable_hapd(hapd2) clear_regdom_dev(dev) @remote_compatible def test_rrm_beacon_req_active(dev, apdev): """Beacon request - active scan mode""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) hapd2 = hostapd.add_ap(apdev[1], {"ssid": "another", "channel": "11"}) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(duration=100, mode=1) token = run_req_beacon(hapd, addr, req) for i in range(1, 3): ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report %d response not received" % i) fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if report.bssid_str == apdev[0]['bssid']: if report.opclass != 81 or report.channel != 1: raise Exception("Incorrect opclass/channel for AP0") elif report.bssid_str == apdev[1]['bssid']: if report.opclass != 81 or report.channel != 11: raise Exception("Incorrect opclass/channel for AP1") @remote_compatible def test_rrm_beacon_req_active_ignore_old_result(dev, apdev): """Beacon request - active scan mode and old scan result""" hapd2 = hostapd.add_ap(apdev[1], {"ssid": "another"}) dev[0].scan_for_bss(apdev[1]['bssid'], freq=2412) hapd2.disable() params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(chan=1, duration=100, mode=1) token = run_req_beacon(hapd, addr, req) ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if report.bssid_str == apdev[1]['bssid']: raise Exception("Old BSS reported") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.2) if ev is not None: raise Exception("Unexpected beacon report response") def start_ap(dev): id = dev.add_network() dev.set_network(id, "mode", "2") dev.set_network_quoted(id, "ssid", 32*'A') dev.set_network_quoted(id, "psk", "1234567890") dev.set_network(id, "frequency", "2412") dev.set_network(id, "scan_freq", "2412") dev.select_network(id) dev.wait_connected() def test_rrm_beacon_req_active_many(dev, apdev): """Beacon request - active scan mode and many BSSs""" for i in range(1, 7): ifname = apdev[0]['ifname'] if i == 1 else apdev[0]['ifname'] + "-%d" % i hapd1 = hostapd.add_bss(apdev[0], ifname, 'bss-%i.conf' % i) hapd1.set('vendor_elements', "dd50" + 80*'bb') hapd1.request("UPDATE_BEACON") wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5') wpas.interface_add("wlan5") wpas.request("SET device_name " + 20*'a') start_ap(wpas) start_ap(dev[1]) start_ap(dev[2]) params = {"ssid": "rrm", "rrm_beacon_report": "1"} params['vendor_elements'] = "dd50" + 80*'aa' hapd = hostapd.add_ap(apdev[1]['ifname'], params) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() ok = False for j in range(3): req = build_beacon_request(chan=1, duration=100, mode=1) token = run_req_beacon(hapd, addr, req) for i in range(10): ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report %d response not received" % i) fields = ev.split(' ') if len(fields[4]) == 0: break report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if i == 9: ok = True if ok: break @remote_compatible def test_rrm_beacon_req_active_ap_channels(dev, apdev): """Beacon request - active scan mode with AP Channel Report subelement""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) hapd2 = hostapd.add_ap(apdev[1], {"ssid": "another", "channel": "11"}) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(chan=255, duration=100, mode=1) token = run_req_beacon(hapd, addr, req + "dd0111" + "330351010b" + "dd0111") for i in range(1, 3): ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report %d response not received" % i) fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if report.bssid_str == apdev[0]['bssid']: if report.opclass != 81 or report.channel != 1: raise Exception("Incorrect opclass/channel for AP0") elif report.bssid_str == apdev[1]['bssid']: if report.opclass != 81 or report.channel != 11: raise Exception("Incorrect opclass/channel for AP1") @remote_compatible def test_rrm_beacon_req_active_no_ir(dev, apdev): """Beacon request - active scan mode and NO_IR channel""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(opclass=118, chan=52, duration=100, mode=1) token = run_req_beacon(hapd, addr, req) ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') if fields[2] != token: raise Exception("Unexpected token value in response (expected %s): %s" % (token, fields[2])) mode = int(fields[3], base=16) if mode & 0x04: raise Exception("Beacon request refused") report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Beacon report: " + str(report)) @remote_compatible def test_rrm_beacon_req_passive_ap_channels(dev, apdev): """Beacon request - passive scan mode with AP Channel Report subelement""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) hapd2 = hostapd.add_ap(apdev[1], {"ssid": "another", "channel": "11"}) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(chan=255, duration=100) token = run_req_beacon(hapd, addr, req + "330351010b" + "3300" + "dd00") for i in range(1, 3): ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report %d response not received" % i) fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if report.bssid_str == apdev[0]['bssid']: if report.opclass != 81 or report.channel != 1: raise Exception("Incorrect opclass/channel for AP0") elif report.bssid_str == apdev[1]['bssid']: if report.opclass != 81 or report.channel != 11: raise Exception("Incorrect opclass/channel for AP1") @remote_compatible def test_rrm_beacon_req_active_single_channel(dev, apdev): """Beacon request - active scan mode with single channel""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) hapd2 = hostapd.add_ap(apdev[1], {"ssid": "another", "channel": "11"}) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(chan=11, duration=100, mode=1) token = run_req_beacon(hapd, addr, req) ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) @remote_compatible def test_rrm_beacon_req_active_ap_channels_unknown_opclass(dev, apdev): """Beacon request - active scan mode with AP Channel Report subelement and unknown opclass""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) hapd2 = hostapd.add_ap(apdev[1], {"ssid": "another", "channel": "11"}) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(chan=255, duration=100, mode=1) token = run_req_beacon(hapd, addr, req + "3303ff010b") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response (refused) not received") fields = ev.split(' ') if fields[3] != "04": raise Exception("Unexpected beacon report mode: " + fields[3]) @remote_compatible def test_rrm_beacon_req_active_ap_channel_oom(dev, apdev): """Beacon request - AP Channel Report subelement and OOM""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) hapd2 = hostapd.add_ap(apdev[1], {"ssid": "another", "channel": "11"}) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() with alloc_fail(dev[0], 1, "wpas_add_channels"): req = build_beacon_request(chan=255, duration=100, mode=1) token = run_req_beacon(hapd, addr, req + "330351010b") wait_fail_trigger(dev[0], "GET_ALLOC_FAIL") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) # allow either not to respond or send refused response if ev is not None: fields = ev.split(' ') if fields[3] != "04": raise Exception("Unexpected Beacon report during OOM with mode: " + fields[3]) @remote_compatible def test_rrm_beacon_req_active_scan_fail(dev, apdev): """Beacon request - Active scan failure""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() with alloc_fail(dev[0], 1, "wpa_scan_clone_params;wpa_supplicant_trigger_scan"): req = build_beacon_request(chan=255, duration=100, mode=1) token = run_req_beacon(hapd, addr, req + "330351010b") wait_fail_trigger(dev[0], "GET_ALLOC_FAIL") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("No Beacon report") fields = ev.split(' ') if fields[3] != "04": raise Exception("Unexpected Beacon report contents: " + ev) @remote_compatible def test_rrm_beacon_req_active_zero_duration(dev, apdev): """Beacon request - Action scan and zero duration""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) hapd2 = hostapd.add_ap(apdev[1], {"ssid": "another", "channel": "11"}) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(mode=1) token = run_req_beacon(hapd, addr, req) ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.2) if ev is not None: raise Exception("Unexpected Beacon report") @remote_compatible def test_rrm_beacon_req_active_fail_random(dev, apdev): """Beacon request - active scan mode os_get_random failure""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() with fail_test(dev[0], 1, "os_get_random;wpas_rm_handle_beacon_req"): req = build_beacon_request(duration=100, mode=1) token = run_req_beacon(hapd, addr, req) ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) @remote_compatible def test_rrm_beacon_req_passive(dev, apdev): """Beacon request - passive scan mode""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) hapd2 = hostapd.add_ap(apdev[1], {"ssid": "another", "channel": "11"}) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(duration=100) token = run_req_beacon(hapd, addr, req) for i in range(1, 3): ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report %d response not received" % i) fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if report.bssid_str == apdev[0]['bssid']: if report.opclass != 81 or report.channel != 1: raise Exception("Incorrect opclass/channel for AP0") elif report.bssid_str == apdev[1]['bssid']: if report.opclass != 81 or report.channel != 11: raise Exception("Incorrect opclass/channel for AP1") @remote_compatible def test_rrm_beacon_req_passive_no_match(dev, apdev): """Beacon request - passive scan mode and no matching BSS""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(chan=1, duration=100, bssid="02:11:22:33:44:55") token = run_req_beacon(hapd, addr, req) ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report %d response not received" % i) fields = ev.split(' ') if len(fields[4]) > 0: raise Exception("Unexpected beacon report BSS") @remote_compatible def test_rrm_beacon_req_passive_no_match_oom(dev, apdev): """Beacon request - passive scan mode and no matching BSS (OOM)""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(chan=1, duration=100, bssid="02:11:22:33:44:55") with alloc_fail(dev[0], 1, "wpabuf_resize;wpas_beacon_rep_scan_process"): token = run_req_beacon(hapd, addr, req) wait_fail_trigger(dev[0], "GET_ALLOC_FAIL") ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=0.2) if ev is not None: raise Exception("Unexpected Beacon report response during OOM") # verify reporting is still functional token = run_req_beacon(hapd, addr, req) ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report %d response not received" % i) fields = ev.split(' ') if len(fields[4]) > 0: raise Exception("Unexpected beacon report BSS") @remote_compatible def test_rrm_beacon_req_active_duration_mandatory(dev, apdev): """Beacon request - Action scan and duration mandatory""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(duration=100, mode=1) token = run_req_beacon(hapd, addr, "req_mode=10 " + req) ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("No Beacon report response") fields = ev.split(' ') rrm = int(dev[0].get_driver_status_field("capa.rrm_flags"), 16) if rrm & 0x20 == 0x20: report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) else: # Driver does not support scan dwell time setting, so wpa_supplicant # rejects the measurement request due to the mandatory duration using # Measurement Report Mode field Incapable=1. if fields[3] != '02': raise Exception("Unexpected Measurement Report Mode: " + fields[3]) if len(fields[4]) > 0: raise Exception("Unexpected beacon report received") def test_rrm_beacon_req_passive_scan_vht(dev, apdev): """Beacon request - passive scan mode - VHT""" clear_scan_cache(apdev[0]) try: hapd = None params = {"ssid": "rrm-vht", "country_code": "FI", 'ieee80211d': '1', "hw_mode": "a", "channel": "36", "ht_capab": "[HT40+]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "1", "vht_oper_centr_freq_seg0_idx": "42", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) dev[0].scan_for_bss(apdev[0]['bssid'], freq=5180) dev[0].connect("rrm-vht", key_mgmt="NONE", scan_freq="5180") addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(opclass=128, duration=100) token = run_req_beacon(hapd, addr, req) ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if report.opclass != 128 or report.channel != 36: raise Exception("Incorrect opclass/channel for AP") req = build_beacon_request(opclass=130, duration=100) token = run_req_beacon(hapd, addr, req) ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if report.opclass != 128 or report.channel != 36: raise Exception("Incorrect opclass/channel for AP") except Exception as e: if isinstance(e, Exception) and str(e) == "AP startup failed": if not vht_supported(): raise HwsimSkip("80 MHz channel not supported in regulatory information") raise finally: clear_regdom(hapd, dev) def test_rrm_beacon_req_passive_scan_vht160(dev, apdev): """Beacon request - passive scan mode - VHT160""" clear_scan_cache(apdev[0]) try: hapd = None params = {"ssid": "rrm-vht", "country_code": "ZA", 'ieee80211d': '1', "hw_mode": "a", "channel": "104", "ht_capab": "[HT40-]", "vht_capab": "[VHT160]", "ieee80211n": "1", "ieee80211ac": "1", "vht_oper_chwidth": "2", "vht_oper_centr_freq_seg0_idx": "114", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) dev[0].scan_for_bss(apdev[0]['bssid'], freq=5520) dev[0].connect("rrm-vht", key_mgmt="NONE", scan_freq="5520") sig = dev[0].request("SIGNAL_POLL").splitlines() if "WIDTH=160 MHz" not in sig: raise Exception("Unexpected SIGNAL_POLL value: " + str(sig)) addr = dev[0].own_addr() hapd.wait_sta() req = build_beacon_request(opclass=129, duration=100) token = run_req_beacon(hapd, addr, req) ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received") fields = ev.split(' ') report = BeaconReport(binascii.unhexlify(fields[4])) logger.info("Received beacon report: " + str(report)) if report.opclass != 129 or report.channel != 104: raise Exception("Incorrect opclass/channel for AP") except Exception as e: if isinstance(e, Exception) and str(e) == "AP startup failed": raise HwsimSkip("ZA regulatory rule likely did not have DFS requirement removed") raise finally: clear_regdom(hapd, dev) def test_rrm_beacon_req_ap_errors(dev, apdev): """Beacon request - AP error cases""" try: run_rrm_beacon_req_ap_errors(dev, apdev) finally: dev[1].request("VENDOR_ELEM_REMOVE 13 *") def run_rrm_beacon_req_ap_errors(dev, apdev): params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) bssid = hapd.own_addr() dev[0].scan_for_bss(bssid, freq=2412) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() # Override RM capabilities (remove all) dev[1].request("VENDOR_ELEM_ADD 13 46050000000000") dev[1].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr1 = dev[1].own_addr() # Beacon request: Too short request data if "FAIL" not in hapd.request("REQ_BEACON " + addr + " 11"): raise Exception("Invalid REQ_BEACON accepted") # Beacon request: 02:00:00:00:01:00 does not support table beacon report req = build_beacon_request(mode=2) if "FAIL" not in hapd.request("REQ_BEACON " + addr1 + " " + req): raise Exception("Invalid REQ_BEACON accepted") # Beacon request: 02:00:00:00:01:00 does not support active beacon report if "FAIL" not in hapd.request("REQ_BEACON " + addr1 + " 51000000640001ffffffffffff"): raise Exception("Invalid REQ_BEACON accepted") # Beacon request: 02:00:00:00:01:00 does not support passive beacon report if "FAIL" not in hapd.request("REQ_BEACON " + addr1 + " 510b0000640000ffffffffffff"): raise Exception("Invalid REQ_BEACON accepted") # Beacon request: Unknown measurement mode 3 if "FAIL" not in hapd.request("REQ_BEACON " + addr1 + " 510b0000640003ffffffffffff"): raise Exception("Invalid REQ_BEACON accepted") for i in range(257): if "FAIL" in hapd.request("REQ_BEACON " + addr + " 510b0000640000ffffffffffff"): raise Exception("REQ_BEACON failed") dev[0].dump_monitor() hapd.dump_monitor() with alloc_fail(hapd, 1, "wpabuf_alloc;hostapd_send_beacon_req"): if "FAIL" not in hapd.request("REQ_BEACON " + addr + " 510b0000640000ffffffffffff"): raise Exception("REQ_BEACON accepted during OOM") with fail_test(hapd, 1, "nl80211_send_frame_cmd;hostapd_send_beacon_req"): if "FAIL" not in hapd.request("REQ_BEACON " + addr + " 510b0000640000ffffffffffff"): raise Exception("REQ_BEACON accepted during failure testing") def test_rrm_req_reject_oom(dev, apdev): """Radio measurement request - OOM while rejecting a request""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) bssid = hapd.own_addr() dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hdr = "d0003a01" + addr.replace(':', '') + 2*bssid.replace(':', '') + "1000" hapd.set("ext_mgmt_frame_handling", "1") dev[0].request("SET ext_mgmt_frame_handling 1") with alloc_fail(dev[0], 1, "wpabuf_resize;wpas_rrm_handle_msr_req_element"): # "RRM: Parallel measurements are not supported, reject" if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + "05000100002603010105"): raise Exception("MGMT_RX_PROCESS failed") wait_fail_trigger(dev[0], "GET_ALLOC_FAIL") ev = hapd.wait_event(["MGMT-RX"], timeout=0.2) if ev is not None: raise Exception("Unexpected beacon report response during OOM") def test_rrm_req_when_rrm_not_used(dev, apdev): """Radio/link measurement request for non-RRM association""" params = {"ssid": "rrm"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) bssid = hapd.own_addr() dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hdr = "d0003a01" + addr.replace(':', '') + 2*bssid.replace(':', '') + "1000" hapd.set("ext_mgmt_frame_handling", "1") dev[0].request("SET ext_mgmt_frame_handling 1") if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + "050001000026030100fe"): raise Exception("MGMT_RX_PROCESS failed") if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + "0502000000"): raise Exception("MGMT_RX_PROCESS failed") ev = hapd.wait_event(["MGMT-RX"], timeout=0.2) if ev is not None: raise Exception("Unexpected beacon report response when RRM is disabled") dev[0].request("REMOVE_NETWORK all") dev[0].wait_disconnected() if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + "050001000026030100fe"): raise Exception("MGMT_RX_PROCESS failed") if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + "0502000000"): raise Exception("MGMT_RX_PROCESS failed") @remote_compatible def test_rrm_req_proto(dev, apdev): """Radio measurement request - protocol testing""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0], params) bssid = hapd.own_addr() dev[0].request("SET LCI ") dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hdr = "d0003a01" + addr.replace(':', '') + 2*bssid.replace(':', '') + "1000" hapd.set("ext_mgmt_frame_handling", "1") dev[0].request("SET ext_mgmt_frame_handling 1") tests = [] # "RRM: Ignoring too short radio measurement request" tests += ["0500", "050001", "05000100"] # No measurement request element at all tests += ["0500010000"] # "RRM: Truncated element" tests += ["050001000026"] # "RRM: Element length too short" tests += ["05000100002600", "0500010000260111", "050001000026021122"] # "RRM: Element length too long" tests += ["05000100002603", "0500010000260311", "050001000026031122"] # "RRM: Enable bit not supported, ignore" tests += ["05000100002603010200"] # "RRM: Measurement report failed. TX power insertion not supported" # OR # "RRM: Link measurement report failed. Request too short" tests += ["0502"] # Too short LCI request tests += ["05000100002603010008"] # Too short neighbor report response tests += ["0505"] # Unexpected neighbor report response tests += ["050500", "050501", "050502", "050503", "050504", "050505"] # Too short beacon request tests += ["05000100002603010005", "0500010000260f010005112233445566778899aabbcc"] # Unknown beacon report mode tests += ["05000100002610010005112233445566778899aabbccdd"] # "RRM: Expected Measurement Request element, but EID is 0" tests += ["05000100000000"] for t in tests: if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + t): raise Exception("MGMT_RX_PROCESS failed") ev = hapd.wait_event(["MGMT-RX"], timeout=0.2) if ev is not None: raise Exception("Unexpected response seen at the AP: " + ev) tests = [] # "RRM: Parallel measurements are not supported, reject" tests += ["05000100002603010105"] # "RRM: Unsupported radio measurement type 254" tests += ["050001000026030100fe"] # Reject LCI request tests += ["0500010000260701000811223344"] # Beacon report info subelement; no valid channels tests += ["05000100002614010005112233445566008899aabbccdd01020000"] for t in tests: if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + t): raise Exception("MGMT_RX_PROCESS failed") ev = hapd.wait_event(["MGMT-RX"], timeout=5) if ev is None: raise Exception("No response seen at the AP") hapd.dump_monitor() dev[0].request("SET LCI " + lci) tests = [] # "Not building LCI report - bad location subject" tests += ["0500010000260701000811223344"] for t in tests: if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + t): raise Exception("MGMT_RX_PROCESS failed") ev = hapd.wait_event(["MGMT-RX"], timeout=0.2) if ev is not None: raise Exception("Unexpected response seen at the AP: " + ev) tests = [] # LCI report or reject tests += ["0500010000260701000801223344", "05000100002607010008010402ff", "05000100002608010008010402ffff"] for t in tests: if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + t): raise Exception("MGMT_RX_PROCESS failed") ev = hapd.wait_event(["MGMT-RX"], timeout=5) if ev is None: raise Exception("No response seen at the AP") hapd.dump_monitor() # Verify rejection of a group-addressed request frame hdr = "d0003a01" + "ffffffffffff" + 2*bssid.replace(':', '') + "1000" # "RRM: Parallel measurements are not supported, reject" t = "05000100002603010105" if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + t): raise Exception("MGMT_RX_PROCESS failed") ev = hapd.wait_event(["MGMT-RX"], timeout=0.1) if ev is not None: raise Exception("Unexpected response seen at the AP (broadcast request rejected)") hapd.dump_monitor() hapd.set("ext_mgmt_frame_handling", "0") dev[0].request("SET ext_mgmt_frame_handling 0") dev[0].request("SET LCI ") def test_rrm_link_measurement(dev, apdev): """Radio measurement request - link measurement""" check_tx_power_support(dev[0]) params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) bssid = hapd.own_addr() dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hdr = "d0003a01" + addr.replace(':', '') + 2*bssid.replace(':', '') + "1000" hapd.set("ext_mgmt_frame_handling", "1") dev[0].request("SET ext_mgmt_frame_handling 1") if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + "0502000000"): raise Exception("MGMT_RX_PROCESS failed") ev = hapd.wait_event(["MGMT-RX"], timeout=5) if ev is None: raise Exception("No link measurement report seen") def test_rrm_link_measurement_oom(dev, apdev): """Radio measurement request - link measurement OOM""" check_tx_power_support(dev[0]) params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) bssid = hapd.own_addr() dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hdr = "d0003a01" + addr.replace(':', '') + 2*bssid.replace(':', '') + "1000" hapd.set("ext_mgmt_frame_handling", "1") dev[0].request("SET ext_mgmt_frame_handling 1") with alloc_fail(dev[0], 1, "wpabuf_alloc;wpas_rrm_handle_link_measurement_request"): if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + "0502000000"): raise Exception("MGMT_RX_PROCESS failed") wait_fail_trigger(dev[0], "GET_ALLOC_FAIL") with fail_test(dev[0], 1, "wpas_rrm_handle_link_measurement_request"): if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + "0502000000"): raise Exception("MGMT_RX_PROCESS failed") wait_fail_trigger(dev[0], "GET_FAIL") ev = hapd.wait_event(["MGMT-RX"], timeout=0.1) if ev is not None: raise Exception("Unexpected beacon report response during OOM") def test_rrm_rep_parse_proto(dev, apdev): """hostapd rrm report parsing protocol testing""" check_rrm_support(dev[0]) params = {"ssid": "rrm", "rrm_neighbor_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) bssid = hapd.own_addr() dev[0].request("SET LCI " + lci) dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hdr = "d0003a01" + bssid.replace(':', '') + addr.replace(':', '') + bssid.replace(':', '') + "1000" hapd.set("ext_mgmt_frame_handling", "1") tests = ["0501", "05ff01", "0501012703fffffe2700", "0501012703ffff05", "05010127ffffff05" + 252*"00", "0504012603ffffff2600", "0504012603ffff08", "0504012608ffff08ffffffffff", "0504012608ffff08ff04021234", "0504012608ffff08ff04020100", "0504012608ffff08ff0402ffff"] for t in tests: if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + t): raise Exception("MGMT_RX_PROCESS failed for " + t) if "OK" not in hapd.request("SET_NEIGHBOR 00:11:22:33:44:55 ssid=\"rrm\" nr=" + nr + " lci=" + lci): raise Exception("Set neighbor failed") if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + "0504012608ffff08ff04021000"): raise Exception("MGMT_RX_PROCESS failed") def test_rrm_unexpected(dev, apdev): """hostapd unexpected rrm""" check_rrm_support(dev[0]) params = {"ssid": "rrm", "rrm_neighbor_report": "0"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) bssid = hapd.own_addr() dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") addr = dev[0].own_addr() hdr = "d0003a01" + bssid.replace(':', '') + addr.replace(':', '') + bssid.replace(':', '') + "1000" hapd.set("ext_mgmt_frame_handling", "1") tests = ["050401"] for t in tests: if "OK" not in hapd.request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + t): raise Exception("MGMT_RX_PROCESS failed for " + t) def check_beacon_req(hapd, addr, idx): req = build_beacon_request(mode=2) request = req + "020100" token = hapd.request("REQ_BEACON " + addr + " " + request) if "FAIL" in token: raise Exception("REQ_BEACON failed (%d)" % idx) ev = hapd.wait_event(["BEACON-RESP-RX"], timeout=10) if ev is None: raise Exception("Beacon report response not received (%d)" % idx) def test_rrm_reassociation(dev, apdev): """Radio measurement request - reassociation""" params = {"ssid": "rrm", "rrm_beacon_report": "1"} hapd = hostapd.add_ap(apdev[0]['ifname'], params) bssid = hapd.own_addr() addr = dev[0].own_addr() dev[0].flush_scan_cache() dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412") hapd.wait_sta() check_beacon_req(hapd, addr, 1) dev[0].request("REASSOCIATE") dev[0].wait_connected() hapd.wait_sta() check_beacon_req(hapd, addr, 1) hapd2 = hostapd.add_ap(apdev[1]['ifname'], params) bssid2 = hapd2.own_addr() dev[0].scan_for_bss(bssid2, freq=2412) dev[0].roam(bssid2) hapd2.wait_sta() check_beacon_req(hapd2, addr, 2) dev[0].scan_for_bss(bssid, freq=2412) dev[0].roam(bssid) hapd.wait_sta() check_beacon_req(hapd, addr, 3)