##### Example wpa_supplicant configuration file ############################### # # This file describes configuration file format and lists all available option. # Please also take a look at simpler configuration examples in 'examples' # subdirectory. # # Empty lines and lines starting with # are ignored # NOTE! This file may contain password information and should probably be made # readable only by root user on multiuser systems. # Note: All file paths in this configuration file should use full (absolute, # not relative to working directory) path in order to allow working directory # to be changed. This can happen if wpa_supplicant is run in the background. # Whether to allow wpa_supplicant to update (overwrite) configuration # # This option can be used to allow wpa_supplicant to overwrite configuration # file whenever configuration is changed (e.g., new network block is added with # wpa_cli or wpa_gui, or a password is changed). This is required for # wpa_cli/wpa_gui to be able to store the configuration changes permanently. # Please note that overwriting configuration file will remove the comments from # it. #update_config=1 # global configuration (shared by all network blocks) # # Parameters for the control interface. If this is specified, wpa_supplicant # will open a control interface that is available for external programs to # manage wpa_supplicant. The meaning of this string depends on which control # interface mechanism is used. For all cases, the existence of this parameter # in configuration is used to determine whether the control interface is # enabled. # # For UNIX domain sockets (default on Linux and BSD): This is a directory that # will be created for UNIX domain sockets for listening to requests from # external programs (CLI/GUI, etc.) for status information and configuration. # The socket file will be named based on the interface name, so multiple # wpa_supplicant processes can be run at the same time if more than one # interface is used. # /var/run/wpa_supplicant is the recommended directory for sockets and by # default, wpa_cli will use it when trying to connect with wpa_supplicant. # # Access control for the control interface can be configured by setting the # directory to allow only members of a group to use sockets. This way, it is # possible to run wpa_supplicant as root (since it needs to change network # configuration and open raw sockets) and still allow GUI/CLI components to be # run as non-root users. However, since the control interface can be used to # change the network configuration, this access needs to be protected in many # cases. By default, wpa_supplicant is configured to use gid 0 (root). If you # want to allow non-root users to use the control interface, add a new group # and change this value to match with that group. Add users that should have # control interface access to this group. If this variable is commented out or # not included in the configuration file, group will not be changed from the # value it got by default when the directory or socket was created. # # When configuring both the directory and group, use following format: # DIR=/var/run/wpa_supplicant GROUP=wheel # DIR=/var/run/wpa_supplicant GROUP=0 # (group can be either group name or gid) # # For UDP connections (default on Windows): The value will be ignored. This # variable is just used to select that the control interface is to be created. # The value can be set to, e.g., udp (ctrl_interface=udp) # # For Windows Named Pipe: This value can be used to set the security descriptor # for controlling access to the control interface. Security descriptor can be # set using Security Descriptor String Format (see http://msdn.microsoft.com/ # library/default.asp?url=/library/en-us/secauthz/security/ # security_descriptor_string_format.asp). The descriptor string needs to be # prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty # DACL (which will reject all connections). See README-Windows.txt for more # information about SDDL string format. # ctrl_interface=/var/run/wpa_supplicant # IEEE 802.1X/EAPOL version # wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines # EAPOL version 2. However, there are many APs that do not handle the new # version number correctly (they seem to drop the frames completely). In order # to make wpa_supplicant interoperate with these APs, the version number is set # to 1 by default. This configuration value can be used to set it to the new # version (2). # Note: When using MACsec, eapol_version shall be set to 3, which is # defined in IEEE Std 802.1X-2010. eapol_version=1 # AP scanning/selection # By default, wpa_supplicant requests driver to perform AP scanning and then # uses the scan results to select a suitable AP. Another alternative is to # allow the driver to take care of AP scanning and selection and use # wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association # information from the driver. # 1: wpa_supplicant initiates scanning and AP selection; if no APs matching to # the currently enabled networks are found, a new network (IBSS or AP mode # operation) may be initialized (if configured) (default) # 0: This mode must only be used when using wired Ethernet drivers # (including MACsec). # 2: like 0, but associate with APs using security policy and SSID (but not # BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to # enable operation with hidden SSIDs and optimized roaming; in this mode, # the network blocks in the configuration file are tried one by one until # the driver reports successful association; each network block should have # explicit security policy (i.e., only one option in the lists) for # key_mgmt, pairwise, group, proto variables # Note: ap_scan=0/2 should not be used with the nl80211 driver interface (the # current Linux interface). ap_scan=1 is the only option working with nl80211. # For finding networks using hidden SSID, scan_ssid=1 in the network block can # be used with nl80211. # When using IBSS or AP mode, ap_scan=2 mode can force the new network to be # created immediately regardless of scan results. ap_scan=1 mode will first try # to scan for existing networks and only if no matches with the enabled # networks are found, a new IBSS or AP mode network is created. ap_scan=1 # Whether to force passive scan for network connection # # By default, scans will send out Probe Request frames on channels that allow # active scanning. This advertise the local station to the world. Normally this # is fine, but users may wish to do passive scanning where the radio should only # listen quietly for Beacon frames and not send any Probe Request frames. Actual # functionality may be driver dependent. # # This parameter can be used to force only passive scanning to be used # for network connection cases. It should be noted that this will slow # down scan operations and reduce likelihood of finding the AP. In # addition, some use cases will override this due to functional # requirements, e.g., for finding an AP that uses hidden SSID # (scan_ssid=1) or P2P device discovery. # # 0: Do normal scans (allow active scans) (default) # 1: Do passive scans. #passive_scan=0 # MPM residency # By default, wpa_supplicant implements the mesh peering manager (MPM) for an # open mesh. However, if the driver can implement the MPM, you may set this to # 0 to use the driver version. When AMPE is enabled, the wpa_supplicant MPM is # always used. # 0: MPM lives in the driver # 1: wpa_supplicant provides an MPM which handles peering (default) #user_mpm=1 # Maximum number of peer links (0-255; default: 99) # Maximum number of mesh peering currently maintained by the STA. #max_peer_links=99 # Timeout in seconds to detect STA inactivity (default: 300 seconds) # # This timeout value is used in mesh STA to clean up inactive stations. #mesh_max_inactivity=300 # Enable 802.11s layer-2 routing and forwarding (dot11MeshForwarding) #mesh_fwding=1 # cert_in_cb - Whether to include a peer certificate dump in events # This controls whether peer certificates for authentication server and # its certificate chain are included in EAP peer certificate events. This is # enabled by default. #cert_in_cb=1 # EAP fast re-authentication # By default, fast re-authentication is enabled for all EAP methods that # support it. This variable can be used to disable fast re-authentication. # Normally, there is no need to disable this. fast_reauth=1 # OpenSSL Engine support # These options can be used to load OpenSSL engines in special or legacy # modes. # The two engines that are supported currently are shown below: # They are both from the opensc project (http://www.opensc.org/) # By default the PKCS#11 engine is loaded if the client_cert or # private_key option appear to be a PKCS#11 URI, and these options # should not need to be used explicitly. # make the opensc engine available #opensc_engine_path=/usr/lib/opensc/engine_opensc.so # make the pkcs11 engine available #pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so # configure the path to the pkcs11 module required by the pkcs11 engine #pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so # OpenSSL cipher string # # This is an OpenSSL specific configuration option for configuring the default # ciphers. If not set, the value configured at build time ("DEFAULT:!EXP:!LOW" # by default) is used. # See https://www.openssl.org/docs/apps/ciphers.html for OpenSSL documentation # on cipher suite configuration. This is applicable only if wpa_supplicant is # built to use OpenSSL. #openssl_ciphers=DEFAULT:!EXP:!LOW # Dynamic EAP methods # If EAP methods were built dynamically as shared object files, they need to be # loaded here before being used in the network blocks. By default, EAP methods # are included statically in the build, so these lines are not needed #load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so #load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so # Driver interface parameters # This field can be used to configure arbitrary driver interface parameters. The # format is specific to the selected driver interface. This field is not used # in most cases. #driver_param="field=value" # Country code # The ISO/IEC alpha2 country code for the country in which this device is # currently operating. #country=US # Maximum lifetime for PMKSA in seconds; default 43200 #dot11RSNAConfigPMKLifetime=43200 # Threshold for reauthentication (percentage of PMK lifetime); default 70 #dot11RSNAConfigPMKReauthThreshold=70 # Timeout for security association negotiation in seconds; default 60 #dot11RSNAConfigSATimeout=60 # Wi-Fi Protected Setup (WPS) parameters # Universally Unique IDentifier (UUID; see RFC 4122) of the device # If not configured, UUID will be generated based on the mechanism selected with # the auto_uuid parameter. #uuid=12345678-9abc-def0-1234-56789abcdef0 # Automatic UUID behavior # 0 = generate static value based on the local MAC address (default) # 1 = generate a random UUID every time wpa_supplicant starts #auto_uuid=0 # Device Name # User-friendly description of device; up to 32 octets encoded in UTF-8 #device_name=Wireless Client # Manufacturer # The manufacturer of the device (up to 64 ASCII characters) #manufacturer=Company # Model Name # Model of the device (up to 32 ASCII characters) #model_name=cmodel # Model Number # Additional device description (up to 32 ASCII characters) #model_number=123 # Serial Number # Serial number of the device (up to 32 characters) #serial_number=12345 # Primary Device Type # Used format: -- # categ = Category as an integer value # OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for # default WPS OUI # subcateg = OUI-specific Sub Category as an integer value # Examples: # 1-0050F204-1 (Computer / PC) # 1-0050F204-2 (Computer / Server) # 5-0050F204-1 (Storage / NAS) # 6-0050F204-1 (Network Infrastructure / AP) #device_type=1-0050F204-1 # OS Version # 4-octet operating system version number (hex string) #os_version=01020300 # Config Methods # List of the supported configuration methods # Available methods: usba ethernet label display ext_nfc_token int_nfc_token # nfc_interface push_button keypad virtual_display physical_display # virtual_push_button physical_push_button # For WSC 1.0: #config_methods=label display push_button keypad # For WSC 2.0: #config_methods=label virtual_display virtual_push_button keypad # Credential processing # 0 = process received credentials internally (default) # 1 = do not process received credentials; just pass them over ctrl_iface to # external program(s) # 2 = process received credentials internally and pass them over ctrl_iface # to external program(s) #wps_cred_processing=0 # Whether to enable SAE (WPA3-Personal transition mode) automatically for # WPA2-PSK credentials received using WPS. # 0 = only add the explicitly listed WPA2-PSK configuration (default) # 1 = add both the WPA2-PSK and SAE configuration and enable PMF so that the # station gets configured in WPA3-Personal transition mode (supports both # WPA2-Personal (PSK) and WPA3-Personal (SAE) APs). #wps_cred_add_sae=0 # Vendor attribute in WPS M1, e.g., Windows 7 Vertical Pairing # The vendor attribute contents to be added in M1 (hex string) #wps_vendor_ext_m1=000137100100020001 # NFC password token for WPS # These parameters can be used to configure a fixed NFC password token for the # station. This can be generated, e.g., with nfc_pw_token. When these # parameters are used, the station is assumed to be deployed with a NFC tag # that includes the matching NFC password token (e.g., written based on the # NDEF record from nfc_pw_token). # #wps_nfc_dev_pw_id: Device Password ID (16..65535) #wps_nfc_dh_pubkey: Hexdump of DH Public Key #wps_nfc_dh_privkey: Hexdump of DH Private Key #wps_nfc_dev_pw: Hexdump of Device Password # Priority for the networks added through WPS # This priority value will be set to each network profile that is added # by executing the WPS protocol. #wps_priority=0 # Device Provisioning Protocol (DPP) parameters # # How to process DPP configuration # 0 = report received configuration to an external program for # processing; do not generate any network profile internally (default) # 1 = report received configuration to an external program and generate # a network profile internally, but do not automatically connect # to the created (disabled) profile; the network profile id is # reported to external programs # 2 = report received configuration to an external program, generate # a network profile internally, try to connect to the created # profile automatically #dpp_config_processing=0 # # Name for Enrollee's DPP Configuration Request #dpp_name=Test # # MUD URL for Enrollee's DPP Configuration Request (optional) #dpp_mud_url=https://example.com/mud # Maximum number of BSS entries to keep in memory # Default: 200 # This can be used to limit memory use on the BSS entries (cached scan # results). A larger value may be needed in environments that have huge number # of APs when using ap_scan=1 mode. #bss_max_count=200 # BSS expiration age in seconds. A BSS will be removed from the local cache # if it is not in use and has not been seen for this time. Default is 180. #bss_expiration_age=180 # BSS expiration after number of scans. A BSS will be removed from the local # cache if it is not seen in this number of scans. # Default is 2. #bss_expiration_scan_count=2 # Automatic scan # This is an optional set of parameters for automatic scanning # within an interface in following format: #autoscan=: # autoscan is like bgscan but on disconnected or inactive state. # For instance, on exponential module parameters would be : #autoscan=exponential:3:300 # Which means a delay between scans on a base exponential of 3, # up to the limit of 300 seconds (3, 9, 27 ... 300) # For periodic module, parameters would be #autoscan=periodic:30 # So a delay of 30 seconds will be applied between each scan. # Note: If sched_scan_plans are configured and supported by the driver, # autoscan is ignored. # filter_ssids - SSID-based scan result filtering # 0 = do not filter scan results (default) # 1 = only include configured SSIDs in scan results/BSS table #filter_ssids=0 # Password (and passphrase, etc.) backend for external storage # format: [:] # Test backend which stores passwords in memory. Should only be used for # development purposes. #ext_password_backend=test:pw1=password|pw2=testing # File-based backend which reads passwords from a file. The parameter # identifies the file to read passwords from. The password file follows the # format of wpa_supplicant.conf and accepts simple `key=passphrase` formatted # passwords. #ext_password_backend=file:/path/to/passwords.conf # Disable P2P functionality # p2p_disabled=1 # Timeout in seconds to detect STA inactivity (default: 300 seconds) # # This timeout value is used in P2P GO mode to clean up # inactive stations. #p2p_go_max_inactivity=300 # Passphrase length (8..63) for P2P GO # # This parameter controls the length of the random passphrase that is # generated at the GO. Default: 8. #p2p_passphrase_len=8 # Extra delay between concurrent P2P search iterations # # This value adds extra delay in milliseconds between concurrent search # iterations to make p2p_find friendlier to concurrent operations by avoiding # it from taking 100% of radio resources. The default value is 500 ms. #p2p_search_delay=500 # Opportunistic Key Caching (also known as Proactive Key Caching) default # This parameter can be used to set the default behavior for the # proactive_key_caching parameter. By default, OKC is disabled unless enabled # with the global okc=1 parameter or with the per-network # proactive_key_caching=1 parameter. With okc=1, OKC is enabled by default, but # can be disabled with per-network proactive_key_caching=0 parameter. #okc=0 # Protected Management Frames default # This parameter can be used to set the default behavior for the ieee80211w # parameter for RSN networks. By default, PMF is disabled unless enabled with # the global pmf=1/2 parameter or with the per-network ieee80211w=1/2 parameter. # With pmf=1/2, PMF is enabled/required by default, but can be disabled with the # per-network ieee80211w parameter. This global default value does not apply # for non-RSN networks (key_mgmt=NONE) since PMF is available only when using # RSN. #pmf=0 # sae_check_mfp: Require PMF support to select SAE key_mgmt # 0 = Do not check PMF for SAE (default) # 1 = Limit SAE when PMF is not enabled # # When enabled SAE will not be selected if PMF will not be used # for the connection. # Scenarios where this check will limit SAE: # 1) ieee80211w=0 is set for the network # 2) The AP does not have PMF enabled. # 3) ieee80211w is unset, pmf=1 is enabled globally, and # the device does not support the BIP cipher. # Consider the configuration of global parameterss sae_check_mfp=1, pmf=1 and a # network configured with ieee80211w unset and key_mgmt=SAE WPA-PSK. # In the example WPA-PSK will be used if the device does not support # the BIP cipher or the AP has PMF disabled. # Limiting SAE with this check can avoid failing to associate to an AP # that is configured with sae_requires_mfp=1 if the device does # not support PMF due to lack of the BIP cipher. # # Enabling this check helps with compliance of the WPA3 # specification for WPA3-Personal transition mode. # The WPA3 specification section 2.3 "WPA3-Personal transition mode" item 8 # states "A STA shall negotiate PMF when associating to an AP using SAE". # With this check WPA3 capable devices when connecting # to transition mode APs that do not advertise PMF support # will not use SAE and instead fallback to PSK. #sae_check_mfp=0 # Enabled SAE finite cyclic groups in preference order # By default (if this parameter is not set), the mandatory group 19 (ECC group # defined over a 256-bit prime order field, NIST P-256) is preferred and groups # 20 (NIST P-384) and 21 (NIST P-521) are also enabled. If this parameter is # set, the groups will be tried in the indicated order. # The group values are listed in the IANA registry: # http://www.iana.org/assignments/ipsec-registry/ipsec-registry.xml#ipsec-registry-9 # Note that groups 1, 2, 5, 22, 23, and 24 should not be used in production # purposes due limited security (see RFC 8247). Groups that are not as strong as # group 19 (ECC, NIST P-256) are unlikely to be useful for production use cases # since all implementations are required to support group 19. #sae_groups=19 20 21 # SAE mechanism for PWE derivation # 0 = hunting-and-pecking loop only (default without password identifier) # 1 = hash-to-element only (default with password identifier) # 2 = both hunting-and-pecking loop and hash-to-element enabled # Note: The default value is likely to change from 0 to 2 once the new # hash-to-element mechanism has received more interoperability testing. # When using SAE password identifier, the hash-to-element mechanism is used # regardless of the sae_pwe parameter value. #sae_pwe=0 # Default value for DTIM period (if not overridden in network block) #dtim_period=2 # Default value for Beacon interval (if not overridden in network block) #beacon_int=100 # Additional vendor specific elements for Beacon and Probe Response frames # This parameter can be used to add additional vendor specific element(s) into # the end of the Beacon and Probe Response frames. The format for these # element(s) is a hexdump of the raw information elements (id+len+payload for # one or more elements). This is used in AP and P2P GO modes. #ap_vendor_elements=dd0411223301 # Ignore scan results older than request # # The driver may have a cache of scan results that makes it return # information that is older than our scan trigger. This parameter can # be used to configure such old information to be ignored instead of # allowing it to update the internal BSS table. #ignore_old_scan_res=0 # scan_cur_freq: Whether to scan only the current frequency # 0: Scan all available frequencies. (Default) # 1: Scan current operating frequency if another VIF on the same radio # is already associated. # Seconds to consider old scan results valid for association (default: 5) #scan_res_valid_for_connect=5 # MAC address policy default # 0 = use permanent MAC address # 1 = use random MAC address for each ESS connection # 2 = like 1, but maintain OUI (with local admin bit set) # 3 = use dedicated/pregenerated MAC address (see mac_value) # # By default, permanent MAC address is used unless policy is changed by # the per-network mac_addr parameter. Global mac_addr=1 can be used to # change this default behavior. #mac_addr=0 # Local MAC address to use whenever connecting with this network profile # This is used with mac_addr=3. #mac_value=02:12:34:56:78:9a # Lifetime of random MAC address in seconds (default: 60) #rand_addr_lifetime=60 # MAC address policy for pre-association operations (scanning, ANQP) # 0 = use permanent MAC address # 1 = use random MAC address # 2 = like 1, but maintain OUI (with local admin bit set) #preassoc_mac_addr=0 # MAC address policy for GAS operations # 0 = use permanent MAC address # 1 = use random MAC address # 2 = like 1, but maintain OUI (with local admin bit set) # Note that this setting is ignored when a specific MAC address is needed for # a full protocol exchange that includes GAS, e.g., when going through a DPP # exchange that exposes the configured interface address as part of the DP # Public Action frame exchanges before using GAS. That same address is then used # during the GAS exchange as well to avoid breaking the protocol expectations. #gas_rand_mac_addr=0 # Lifetime of GAS random MAC address in seconds (default: 60) #gas_rand_addr_lifetime=60 # Interworking (IEEE 802.11u) # Enable Interworking # interworking=1 # Enable P2P GO advertisement of Interworking # go_interworking=1 # P2P GO Interworking: Access Network Type # 0 = Private network # 1 = Private network with guest access # 2 = Chargeable public network # 3 = Free public network # 4 = Personal device network # 5 = Emergency services only network # 14 = Test or experimental # 15 = Wildcard #go_access_network_type=0 # P2P GO Interworking: Whether the network provides connectivity to the Internet # 0 = Unspecified # 1 = Network provides connectivity to the Internet #go_internet=1 # P2P GO Interworking: Group Venue Info (optional) # The available values are defined in IEEE Std 802.11-2016, 9.4.1.35. # Example values (group,type): # 0,0 = Unspecified # 1,7 = Convention Center # 1,13 = Coffee Shop # 2,0 = Unspecified Business # 7,1 Private Residence #go_venue_group=7 #go_venue_type=1 # Homogeneous ESS identifier # If this is set, scans will be used to request response only from BSSes # belonging to the specified Homogeneous ESS. This is used only if interworking # is enabled. # hessid=00:11:22:33:44:55 # Automatic network selection behavior # 0 = do not automatically go through Interworking network selection # (i.e., require explicit interworking_select command for this; default) # 1 = perform Interworking network selection if one or more # credentials have been configured and scan did not find a # matching network block #auto_interworking=0 # GAS Address3 field behavior # 0 = P2P specification (Address3 = AP BSSID); default # 1 = IEEE 802.11 standard compliant (Address3 = Wildcard BSSID when # sent to not-associated AP; if associated, AP BSSID) #gas_address3=0 # Publish fine timing measurement (FTM) responder functionality in # the Extended Capabilities element bit 70. # Controls whether FTM responder functionality will be published by AP/STA. # Note that actual FTM responder operation is managed outside wpa_supplicant. # 0 = Do not publish; default # 1 = Publish #ftm_responder=0 # Publish fine timing measurement (FTM) initiator functionality in # the Extended Capabilities element bit 71. # Controls whether FTM initiator functionality will be published by AP/STA. # Note that actual FTM initiator operation is managed outside wpa_supplicant. # 0 = Do not publish; default # 1 = Publish #ftm_initiator=0 # credential block # # Each credential used for automatic network selection is configured as a set # of parameters that are compared to the information advertised by the APs when # interworking_select and interworking_connect commands are used. # # credential fields: # # temporary: Whether this credential is temporary and not to be saved # # priority: Priority group # By default, all networks and credentials get the same priority group # (0). This field can be used to give higher priority for credentials # (and similarly in struct wpa_ssid for network blocks) to change the # Interworking automatic networking selection behavior. The matching # network (based on either an enabled network block or a credential) # with the highest priority value will be selected. # # pcsc: Use PC/SC and SIM/USIM card # # realm: Home Realm for Interworking # # username: Username for Interworking network selection # # password: Password for Interworking network selection # # ca_cert: CA certificate for Interworking network selection # # client_cert: File path to client certificate file (PEM/DER) # This field is used with Interworking networking selection for a case # where client certificate/private key is used for authentication # (EAP-TLS). Full path to the file should be used since working # directory may change when wpa_supplicant is run in the background. # # Certificates from PKCS#11 tokens can be referenced by a PKCS#11 URI. # # For example: private_key="pkcs11:manufacturer=piv_II;id=%01" # # Alternatively, a named configuration blob can be used by setting # this to blob://blob_name. # # private_key: File path to client private key file (PEM/DER/PFX) # When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be # commented out. Both the private key and certificate will be read # from the PKCS#12 file in this case. Full path to the file should be # used since working directory may change when wpa_supplicant is run # in the background. # # Keys in PKCS#11 tokens can be referenced by a PKCS#11 URI. # For example: private_key="pkcs11:manufacturer=piv_II;id=%01" # # Windows certificate store can be used by leaving client_cert out and # configuring private_key in one of the following formats: # # cert://substring_to_match # # hash://certificate_thumbprint_in_hex # # For example: private_key="hash://63093aa9c47f56ae88334c7b65a4" # # Note that when running wpa_supplicant as an application, the user # certificate store (My user account) is used, whereas computer store # (Computer account) is used when running wpasvc as a service. # # Alternatively, a named configuration blob can be used by setting # this to blob://blob_name. # # private_key_passwd: Password for private key file # # imsi: IMSI in | | '-' | format # # milenage: Milenage parameters for SIM/USIM simulator in :: # format # # domain: Home service provider FQDN(s) # This is used to compare against the Domain Name List to figure out # whether the AP is operated by the Home SP. Multiple domain entries can # be used to configure alternative FQDNs that will be considered home # networks. # # home_ois: Home OI(s) # This string field contains one or more comma delimited OIs (hexdump) # identifying the access the access points that support authentication # with this credential. There are an alternative to the use of the realm # parameter. When using Home OIs to match the network, the EAP parameters # need to be pre-configured with the credentials since the NAI Realm # information may not be available or fetched. # A successful authentication with the access point is possible as soon # as at least one Home OI from the list matches an OI in the Roaming # Consortium advertised by the access point. # (Hotspot 2.0 PerProviderSubscription//HomeSP/HomeOIList//HomeOI) # # required_home_ois: Required Home OI(s) # This string field contains the set of Home OI(s) (hexdump) that are # required to be advertised by the AP for the credential to be considered # matching. # (Hotspot 2.0 PerProviderSubscription//HomeSP/HomeOIList//HomeOIRequired) # # roaming_consortium: Roaming Consortium OI # Deprecated: use home_ois instead. # If roaming_consortium_len is non-zero, this field contains the # Roaming Consortium OI that can be used to determine which access # points support authentication with this credential. This is an # alternative to the use of the realm parameter. When using Roaming # Consortium to match the network, the EAP parameters need to be # pre-configured with the credential since the NAI Realm information # may not be available or fetched. # # required_roaming_consortium: Required Roaming Consortium OI # Deprecated: use required_home_ois instead. # If required_roaming_consortium_len is non-zero, this field contains the # Roaming Consortium OI that is required to be advertised by the AP for # the credential to be considered matching. # # roaming_consortiums: Roaming Consortium OI(s) memberships # This string field contains one or more comma delimited OIs (hexdump) # identifying the roaming consortiums of which the provider is a member. # The list is sorted from the most preferred one to the least preferred # one. A match between the Roaming Consortium OIs advertised by an AP and # the OIs in this list indicates that successful authentication is # possible. # (Hotspot 2.0 PerProviderSubscription//HomeSP/RoamingConsortiumOI) # # eap: Pre-configured EAP method # This optional field can be used to specify which EAP method will be # used with this credential. If not set, the EAP method is selected # automatically based on ANQP information (e.g., NAI Realm). # # phase1: Pre-configure Phase 1 (outer authentication) parameters # This optional field is used with like the 'eap' parameter. # # phase2: Pre-configure Phase 2 (inner authentication) parameters # This optional field is used with like the 'eap' parameter. # # excluded_ssid: Excluded SSID # This optional field can be used to excluded specific SSID(s) from # matching with the network. Multiple entries can be used to specify more # than one SSID. # # roaming_partner: Roaming partner information # This optional field can be used to configure preferences between roaming # partners. The field is a string in following format: # ,<0/1 exact match>,,<* or country code> # (non-exact match means any subdomain matches the entry; priority is in # 0..255 range with 0 being the highest priority) # # update_identifier: PPS MO ID # (Hotspot 2.0 PerProviderSubscription/UpdateIdentifier) # # provisioning_sp: FQDN of the SP that provisioned the credential # This optional field can be used to keep track of the SP that provisioned # the credential to find the PPS MO (./Wi-Fi/). # # Minimum backhaul threshold (PPS//Policy/MinBackhauldThreshold/*) # These fields can be used to specify minimum download/upload backhaul # bandwidth that is preferred for the credential. This constraint is # ignored if the AP does not advertise WAN Metrics information or if the # limit would prevent any connection. Values are in kilobits per second. # min_dl_bandwidth_home # min_ul_bandwidth_home # min_dl_bandwidth_roaming # min_ul_bandwidth_roaming # # max_bss_load: Maximum BSS Load Channel Utilization (1..255) # (PPS//Policy/MaximumBSSLoadValue) # This value is used as the maximum channel utilization for network # selection purposes for home networks. If the AP does not advertise # BSS Load or if the limit would prevent any connection, this constraint # will be ignored. # # req_conn_capab: Required connection capability # (PPS//Policy/RequiredProtoPortTuple) # This value is used to configure set of required protocol/port pairs that # a roaming network shall support (include explicitly in Connection # Capability ANQP element). This constraint is ignored if the AP does not # advertise Connection Capability or if this constraint would prevent any # network connection. This policy is not used in home networks. # Format: [: ... # # Example: # sched_scan_plans=10:100 20:200 30 # Multi Band Operation (MBO) non-preferred channels # A space delimited list of non-preferred channels where each channel is a colon # delimited list of values. # Format: # non_pref_chan=::: # Example: # non_pref_chan=81:5:10:2 81:1:0:2 81:9:0:2 # MBO Cellular Data Capabilities # 1 = Cellular data connection available # 2 = Cellular data connection not available # 3 = Not cellular capable (default) #mbo_cell_capa=3 # Optimized Connectivity Experience (OCE) # oce: Enable OCE features (bitmap) # Set BIT(0) to Enable OCE in non-AP STA mode (default; disabled if the driver # does not indicate support for OCE in STA mode) # Set BIT(1) to Enable OCE in STA-CFON mode #oce=1 # Extended Key ID support for Individually Addressed frames # 0 = force off: Do not use Extended Key ID (default) # 1 = auto: Activate Extended Key ID support if the driver supports it #extended_key_id=0 # network block # # Each network (usually AP's sharing the same SSID) is configured as a separate # block in this configuration file. The network blocks are in preference order # (the first match is used). # # network block fields: # # disabled: # 0 = this network can be used (default) # 1 = this network block is disabled (can be enabled through ctrl_iface, # e.g., with wpa_cli or wpa_gui) # # id_str: Network identifier string for external scripts. This value is passed # to external action script through wpa_cli as WPA_ID_STR environment # variable to make it easier to do network specific configuration. # # ssid: SSID (mandatory); network name in one of the optional formats: # - an ASCII string with double quotation # - a hex string (two characters per octet of SSID) # - a printf-escaped ASCII string P"" # # scan_ssid: # 0 = do not scan this SSID with specific Probe Request frames (default) # 1 = scan with SSID-specific Probe Request frames (this can be used to # find APs that do not accept broadcast SSID or use multiple SSIDs; # this will add latency to scanning, so enable this only when needed) # # bssid: BSSID (optional); if set, this network block is used only when # associating with the AP using the configured BSSID # # ignore_broadcast_ssid: SSID broadcast behavior # Send empty SSID in beacons and ignore probe request frames that do not # specify full SSID, i.e., require stations to know SSID. # default: disabled (0) # 1 = send empty (length=0) SSID in beacon and ignore probe request for # broadcast SSID # 2 = clear SSID (ASCII 0), but keep the original length (this may be required # with some clients that do not support empty SSID) and ignore probe # requests for broadcast SSID # # priority: priority group (integer) # By default, all networks will get same priority group (0). If some of the # networks are more desirable, this field can be used to change the order in # which wpa_supplicant goes through the networks when selecting a BSS. The # priority groups will be iterated in decreasing priority (i.e., the larger the # priority value, the sooner the network is matched against the scan results). # Within each priority group, networks will be selected based on security # policy, signal strength, etc. # Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not # using this priority to select the order for scanning. Instead, they try the # networks in the order that used in the configuration file. # # mode: IEEE 802.11 operation mode # 0 = infrastructure (Managed) mode, i.e., associate with an AP (default) # 1 = IBSS (ad-hoc, peer-to-peer) # 2 = AP (access point) # Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP) and # WPA-PSK (with proto=RSN). In addition, key_mgmt=WPA-NONE (fixed group key # TKIP/CCMP) is available for backwards compatibility, but its use is # deprecated. WPA-None requires following network block options: # proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not # both), and psk must also be set. # # frequency: Channel frequency in megahertz (MHz) for IBSS, e.g., # 2412 = IEEE 802.11b/g channel 1. This value is used to configure the initial # channel for IBSS (adhoc) networks. It is ignored in the infrastructure mode. # In addition, this value is only used by the station that creates the IBSS. If # an IBSS network with the configured SSID is already present, the frequency of # the network will be used instead of this configured value. # # pbss: Whether to use PBSS. Relevant to IEEE 802.11ad networks only. # 0 = do not use PBSS # 1 = use PBSS # 2 = don't care (not allowed in AP mode) # Used together with mode configuration. When mode is AP, it means to start a # PCP instead of a regular AP. When mode is infrastructure it means connect # to a PCP instead of AP. In this mode you can also specify 2 (don't care) # which means connect to either PCP or AP. # P2P_GO and P2P_GROUP_FORMATION modes must use PBSS in IEEE 802.11ad network. # For more details, see IEEE Std 802.11ad-2012. # # scan_freq: List of frequencies to scan # Space-separated list of frequencies in MHz to scan when searching for this # BSS. If the subset of channels used by the network is known, this option can # be used to optimize scanning to not occur on channels that the network does # not use. Example: scan_freq=2412 2437 2462 # # freq_list: Array of allowed frequencies # Space-separated list of frequencies in MHz to allow for selecting the BSS. If # set, scan results that do not match any of the specified frequencies are not # considered when selecting a BSS. # # This can also be set on the outside of the network block. In this case, # it limits the frequencies that will be scanned. # # bgscan: Background scanning # wpa_supplicant behavior for background scanning can be specified by # configuring a bgscan module. These modules are responsible for requesting # background scans for the purpose of roaming within an ESS (i.e., within a # single network block with all the APs using the same SSID). The bgscan # parameter uses following format: ":" # Following bgscan modules are available: # simple - Periodic background scans based on signal strength # send_btm_query > 0 means do this many BTM queries before attempting a scan. # bgscan="simple::: # [:]" # bgscan="simple:30:-45:300" # bgscan="simple:30:-45:300:3" # learn - Learn channels used by the network and try to avoid bgscans on other # channels (experimental) # bgscan="learn::: # [:]" # bgscan="learn:30:-45:300:/etc/wpa_supplicant/network1.bgscan" # Explicitly disable bgscan by setting # bgscan="" # # This option can also be set outside of all network blocks for the bgscan # parameter to apply for all the networks that have no specific bgscan # parameter. # # proto: list of accepted protocols # WPA = WPA/IEEE 802.11i/D3.0 # RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN) # Note that RSN is used also for WPA3. # If not set, this defaults to: WPA RSN # # key_mgmt: list of accepted authenticated key management protocols # WPA-PSK = WPA pre-shared key (this requires 'psk' field) # WPA-EAP = WPA using EAP authentication # IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically # generated WEP keys # NONE = WPA is not used; plaintext or static WEP could be used # WPA-NONE = WPA-None for IBSS (deprecated; use proto=RSN key_mgmt=WPA-PSK # instead) # FT-PSK = Fast BSS Transition (IEEE 802.11r) with pre-shared key # FT-EAP = Fast BSS Transition (IEEE 802.11r) with EAP authentication # FT-EAP-SHA384 = Fast BSS Transition (IEEE 802.11r) with EAP authentication # and using SHA384 # WPA-PSK-SHA256 = Like WPA-PSK but using stronger SHA256-based algorithms # WPA-EAP-SHA256 = Like WPA-EAP but using stronger SHA256-based algorithms # SAE = Simultaneous authentication of equals; pre-shared key/password -based # authentication with stronger security than WPA-PSK especially when using # not that strong password; a.k.a. WPA3-Personal # FT-SAE = SAE with FT # WPA-EAP-SUITE-B = Suite B 128-bit level # WPA-EAP-SUITE-B-192 = Suite B 192-bit level # OSEN = Hotspot 2.0 Rel 2 online signup connection # FILS-SHA256 = Fast Initial Link Setup with SHA256 # FILS-SHA384 = Fast Initial Link Setup with SHA384 # FT-FILS-SHA256 = FT and Fast Initial Link Setup with SHA256 # FT-FILS-SHA384 = FT and Fast Initial Link Setup with SHA384 # OWE = Opportunistic Wireless Encryption (a.k.a. Enhanced Open) # DPP = Device Provisioning Protocol # If not set, this defaults to: WPA-PSK WPA-EAP # # ieee80211w: whether management frame protection is enabled # 0 = disabled (default unless changed with the global pmf parameter) # 1 = optional # 2 = required # The most common configuration options for this based on the PMF (protected # management frames) certification program are: # PMF enabled: ieee80211w=1 and key_mgmt=WPA-EAP WPA-EAP-SHA256 # PMF required: ieee80211w=2 and key_mgmt=WPA-EAP-SHA256 # (and similarly for WPA-PSK and WPA-PSK-SHA256 if WPA2-Personal is used) # WPA3-Personal-only mode: ieee80211w=2 and key_mgmt=SAE # # ocv: whether operating channel validation is enabled # This is a countermeasure against multi-channel on-path attacks. # Enabling this automatically also enables ieee80211w, if not yet enabled. # 0 = disabled (default) # 1 = enabled if wpa_supplicant's SME in use. Otherwise enabled only when the # driver indicates support for operating channel validation. #ocv=1 # # auth_alg: list of allowed IEEE 802.11 authentication algorithms # OPEN = Open System authentication (required for WPA/WPA2) # SHARED = Shared Key authentication (requires static WEP keys) # LEAP = LEAP/Network EAP (only used with LEAP) # If not set, automatic selection is used (Open System with LEAP enabled if # LEAP is allowed as one of the EAP methods). # # pairwise: list of accepted pairwise (unicast) ciphers for WPA # CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] # TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] # NONE = Use only Group Keys (deprecated, should not be included if APs support # pairwise keys) # If not set, this defaults to: CCMP TKIP # # group: list of accepted group (broadcast/multicast) ciphers for WPA # CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] # TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] # WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key # WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11] # If not set, this defaults to: CCMP TKIP WEP104 WEP40 # # group_mgmt: list of accepted group management ciphers for RSN (PMF) # AES-128-CMAC = BIP-CMAC-128 # BIP-GMAC-128 # BIP-GMAC-256 # BIP-CMAC-256 # If not set, no constraint on the cipher, i.e., accept whichever cipher the AP # indicates. # # psk: WPA preshared key; 256-bit pre-shared key # The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e., # 32 bytes or as an ASCII passphrase (in which case, the real PSK will be # generated using the passphrase and SSID). ASCII passphrase must be between # 8 and 63 characters (inclusive). ext: format can # be used to indicate that the PSK/passphrase is stored in external storage. # This field is not needed, if WPA-EAP is used. # Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys # from ASCII passphrase. This process uses lot of CPU and wpa_supplicant # startup and reconfiguration time can be optimized by generating the PSK only # only when the passphrase or SSID has actually changed. # # mem_only_psk: Whether to keep PSK/passphrase only in memory # 0 = allow psk/passphrase to be stored to the configuration file # 1 = do not store psk/passphrase to the configuration file #mem_only_psk=0 # # sae_password: SAE password # This parameter can be used to set a password for SAE. By default, the # passphrase from the psk parameter is used if this separate parameter is not # used, but psk follows the WPA-PSK constraints (8..63 characters) even though # SAE passwords do not have such constraints. # # sae_password_id: SAE password identifier # This parameter can be used to set an identifier for the SAE password. By # default, no such identifier is used. If set, the specified identifier value # is used by the other peer to select which password to use for authentication. # # eapol_flags: IEEE 802.1X/EAPOL options (bit field) # Dynamic WEP key required for non-WPA mode # bit0 (1): require dynamically generated unicast WEP key # bit1 (2): require dynamically generated broadcast WEP key # (3 = require both keys; default) # Note: When using wired authentication (including MACsec drivers), # eapol_flags must be set to 0 for the authentication to be completed # successfully. # # macsec_policy: IEEE 802.1X/MACsec options # This determines how sessions are secured with MACsec (only for MACsec # drivers). # 0: MACsec not in use (default) # 1: MACsec enabled - Should secure, accept key server's advice to # determine whether to use a secure session or not. # # macsec_integ_only: IEEE 802.1X/MACsec transmit mode # This setting applies only when MACsec is in use, i.e., # - macsec_policy is enabled # - the key server has decided to enable MACsec # 0: Encrypt traffic (default) # 1: Integrity only # # macsec_replay_protect: IEEE 802.1X/MACsec replay protection # This setting applies only when MACsec is in use, i.e., # - macsec_policy is enabled # - the key server has decided to enable MACsec # 0: Replay protection disabled (default) # 1: Replay protection enabled # # macsec_replay_window: IEEE 802.1X/MACsec replay protection window # This determines a window in which replay is tolerated, to allow receipt # of frames that have been misordered by the network. # This setting applies only when MACsec replay protection active, i.e., # - macsec_replay_protect is enabled # - the key server has decided to enable MACsec # 0: No replay window, strict check (default) # 1..2^32-1: number of packets that could be misordered # # macsec_offload - Enable MACsec hardware offload # # This setting applies only when MACsec is in use, i.e., # - the key server has decided to enable MACsec # # 0 = MACSEC_OFFLOAD_OFF (default) # 1 = MACSEC_OFFLOAD_PHY # 2 = MACSEC_OFFLOAD_MAC # # macsec_port: IEEE 802.1X/MACsec port # Port component of the SCI # Range: 1-65534 (default: 1) # # mka_cak, mka_ckn, and mka_priority: IEEE 802.1X/MACsec pre-shared key mode # This allows to configure MACsec with a pre-shared key using a (CAK,CKN) pair. # In this mode, instances of wpa_supplicant can act as MACsec peers. The peer # with lower priority will become the key server and start distributing SAKs. # mka_cak (CAK = Secure Connectivity Association Key) takes a 16-byte (128-bit) # hex-string (32 hex-digits) or a 32-byte (256-bit) hex-string (64 hex-digits) # mka_ckn (CKN = CAK Name) takes a 1..32-bytes (8..256 bit) hex-string # (2..64 hex-digits) # mka_priority (Priority of MKA Actor) is in 0..255 range with 255 being # default priority # # mixed_cell: This option can be used to configure whether so called mixed # cells, i.e., networks that use both plaintext and encryption in the same # SSID, are allowed when selecting a BSS from scan results. # 0 = disabled (default) # 1 = enabled # # proactive_key_caching: # Enable/disable opportunistic PMKSA caching for WPA2. # 0 = disabled (default unless changed with the global okc parameter) # 1 = enabled # # ft_eap_pmksa_caching: # Whether FT-EAP PMKSA caching is allowed # 0 = do not try to use PMKSA caching with FT-EAP (default) # 1 = try to use PMKSA caching with FT-EAP # This controls whether to try to use PMKSA caching with FT-EAP for the # FT initial mobility domain association. #ft_eap_pmksa_caching=0 # # wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or # hex without quotation, e.g., 0102030405) # wep_tx_keyidx: Default WEP key index (TX) (0..3) # # wpa_ptk_rekey: Maximum lifetime for PTK in seconds. This can be used to # enforce rekeying of PTK to mitigate some attacks against TKIP deficiencies. # # wpa_deny_ptk0_rekey: Workaround for PTK rekey issues # PTK0 rekeys (using only one Key ID value for pairwise keys) can degrade the # security and stability with some cards. # To avoid the issues wpa_supplicant can replace those PTK rekeys (including # EAP reauthentications) with fast reconnects. # # Available options: # 0 = always rekey when configured/instructed (default) # 1 = only rekey when the local driver is explicitly indicating it can perform # this operation without issues # 2 = never allow problematic PTK0 rekeys # # group_rekey: Group rekeying time in seconds. This value, if non-zero, is used # as the dot11RSNAConfigGroupRekeyTime parameter when operating in # Authenticator role in IBSS, or in AP and mesh modes. # # Following fields are only used with internal EAP implementation. # eap: space-separated list of accepted EAP methods # MD5 = EAP-MD5 (insecure and does not generate keying material -> # cannot be used with WPA; to be used as a Phase 2 method # with EAP-PEAP or EAP-TTLS) # MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used # as a Phase 2 method with EAP-PEAP or EAP-TTLS) # OTP = EAP-OTP (cannot be used separately with WPA; to be used # as a Phase 2 method with EAP-PEAP or EAP-TTLS) # GTC = EAP-GTC (cannot be used separately with WPA; to be used # as a Phase 2 method with EAP-PEAP or EAP-TTLS) # TLS = EAP-TLS (client and server certificate) # PEAP = EAP-PEAP (with tunnelled EAP authentication) # TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2 # authentication) # If not set, all compiled in methods are allowed. # # identity: Identity string for EAP # This field is also used to configure user NAI for # EAP-PSK/PAX/SAKE/GPSK. # anonymous_identity: Anonymous identity string for EAP (to be used as the # unencrypted identity with EAP types that support different tunnelled # identity, e.g., EAP-TTLS). This field can also be used with # EAP-SIM/AKA/AKA' to store the pseudonym identity. # password: Password string for EAP. This field can include either the # plaintext password (using ASCII or hex string) or a NtPasswordHash # (16-byte MD4 hash of password) in hash:<32 hex digits> format. # NtPasswordHash can only be used when the password is for MSCHAPv2 or # MSCHAP (EAP-MSCHAPv2, EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, LEAP). # EAP-PSK (128-bit PSK), EAP-PAX (128-bit PSK), and EAP-SAKE (256-bit # PSK) is also configured using this field. For EAP-GPSK, this is a # variable length PSK. ext: format can # be used to indicate that the password is stored in external storage. # ca_cert: File path to CA certificate file (PEM/DER). This file can have one # or more trusted CA certificates. If ca_cert and ca_path are not # included, server certificate will not be verified. This is insecure and # a trusted CA certificate should always be configured when using # EAP-TLS/TTLS/PEAP. Full path should be used since working directory may # change when wpa_supplicant is run in the background. # # Alternatively, this can be used to only perform matching of the server # certificate (SHA-256 hash of the DER encoded X.509 certificate). In # this case, the possible CA certificates in the server certificate chain # are ignored and only the server certificate is verified. This is # configured with the following format: # hash:://server/sha256/cert_hash_in_hex # For example: "hash://server/sha256/ # 5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" # # On Windows, trusted CA certificates can be loaded from the system # certificate store by setting this to cert_store://, e.g., # ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT". # Note that when running wpa_supplicant as an application, the user # certificate store (My user account) is used, whereas computer store # (Computer account) is used when running wpasvc as a service. # ca_path: Directory path for CA certificate files (PEM). This path may # contain multiple CA certificates in OpenSSL format. Common use for this # is to point to system trusted CA list which is often installed into # directory like /etc/ssl/certs. If configured, these certificates are # added to the list of trusted CAs. ca_cert may also be included in that # case, but it is not required. # client_cert: File path to client certificate file (PEM/DER) # Full path should be used since working directory may change when # wpa_supplicant is run in the background. # Alternatively, a named configuration blob can be used by setting this # to blob://. # private_key: File path to client private key file (PEM/DER/PFX) # When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be # commented out. Both the private key and certificate will be read from # the PKCS#12 file in this case. Full path should be used since working # directory may change when wpa_supplicant is run in the background. # Windows certificate store can be used by leaving client_cert out and # configuring private_key in one of the following formats: # cert://substring_to_match # hash://certificate_thumbprint_in_hex # for example: private_key="hash://63093aa9c47f56ae88334c7b65a4" # Note that when running wpa_supplicant as an application, the user # certificate store (My user account) is used, whereas computer store # (Computer account) is used when running wpasvc as a service. # Alternatively, a named configuration blob can be used by setting this # to blob://. # private_key_passwd: Password for private key file (if left out, this will be # asked through control interface) # subject_match: Substring to be matched against the subject of the # authentication server certificate. If this string is set, the server # certificate is only accepted if it contains this string in the subject. # The subject string is in following format: # /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com # Note: Since this is a substring match, this cannot be used securely to # do a suffix match against a possible domain name in the CN entry. For # such a use case, domain_suffix_match or domain_match should be used # instead. # altsubject_match: Semicolon separated string of entries to be matched against # the alternative subject name of the authentication server certificate. # If this string is set, the server certificate is only accepted if it # contains one of the entries in an alternative subject name extension. # altSubjectName string is in following format: TYPE:VALUE # Example: EMAIL:server@example.com # Example: DNS:server.example.com;DNS:server2.example.com # Following types are supported: EMAIL, DNS, URI # domain_suffix_match: Constraint for server domain name. If set, this FQDN is # used as a suffix match requirement for the AAA server certificate in # SubjectAltName dNSName element(s). If a matching dNSName is found, this # constraint is met. If no dNSName values are present, this constraint is # matched against SubjectName CN using same suffix match comparison. # # Suffix match here means that the host/domain name is compared one label # at a time starting from the top-level domain and all the labels in # domain_suffix_match shall be included in the certificate. The # certificate may include additional sub-level labels in addition to the # required labels. # # More than one match string can be provided by using semicolons to # separate the strings (e.g., example.org;example.com). When multiple # strings are specified, a match with any one of the values is considered # a sufficient match for the certificate, i.e., the conditions are ORed # together. # # For example, domain_suffix_match=example.com would match # test.example.com but would not match test-example.com. # domain_match: Constraint for server domain name # If set, this FQDN is used as a full match requirement for the # server certificate in SubjectAltName dNSName element(s). If a # matching dNSName is found, this constraint is met. If no dNSName # values are present, this constraint is matched against SubjectName CN # using same full match comparison. This behavior is similar to # domain_suffix_match, but has the requirement of a full match, i.e., # no subdomains or wildcard matches are allowed. Case-insensitive # comparison is used, so "Example.com" matches "example.com", but would # not match "test.Example.com". # # More than one match string can be provided by using semicolons to # separate the strings (e.g., example.org;example.com). When multiple # strings are specified, a match with any one of the values is considered # a sufficient match for the certificate, i.e., the conditions are ORed # together. # phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters # (string with field-value pairs, e.g., "peapver=0" or # "peapver=1 peaplabel=1") # 'peapver' can be used to force which PEAP version (0 or 1) is used. # 'peaplabel=1' can be used to force new label, "client PEAP encryption", # to be used during key derivation when PEAPv1 or newer. Most existing # PEAPv1 implementation seem to be using the old label, "client EAP # encryption", and wpa_supplicant is now using that as the default value. # Some servers, e.g., Radiator, may require peaplabel=1 configuration to # interoperate with PEAPv1; see eap_testing.txt for more details. # 'peap_outer_success=0' can be used to terminate PEAP authentication on # tunneled EAP-Success. This is required with some RADIUS servers that # implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g., # Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode) # include_tls_length=1 can be used to force wpa_supplicant to include # TLS Message Length field in all TLS messages even if they are not # fragmented. # sim_min_num_chal=3 can be used to configure EAP-SIM to require three # challenges (by default, it accepts 2 or 3) # result_ind=1 can be used to enable EAP-SIM and EAP-AKA to use # protected result indication. # 'crypto_binding' option can be used to control PEAPv0 cryptobinding # behavior: # * 0 = do not use cryptobinding (default) # * 1 = use cryptobinding if server supports it # * 2 = require cryptobinding # 'phase2_auth' option can be used to control Phase 2 (i.e., within TLS # tunnel) behavior for PEAP: # * 0 = do not require Phase 2 authentication # * 1 = require Phase 2 authentication when client certificate # (private_key/client_cert) is no used and TLS session resumption was # not used (default) # * 2 = require Phase 2 authentication in all cases # EAP-WSC (WPS) uses following options: pin= or # pbc=1. # # For wired IEEE 802.1X authentication, "allow_canned_success=1" can be # used to configure a mode that allows EAP-Success (and EAP-Failure) # without going through authentication step. Some switches use such # sequence when forcing the port to be authorized/unauthorized or as a # fallback option if the authentication server is unreachable. By default, # wpa_supplicant discards such frames to protect against potential attacks # by rogue devices, but this option can be used to disable that protection # for cases where the server/authenticator does not need to be # authenticated. # phase2: Phase2 (inner authentication with TLS tunnel) parameters # (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or # "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS). "mschapv2_retry=0" can be # used to disable MSCHAPv2 password retry in authentication failure cases. # # TLS-based methods can use the following parameters to control TLS behavior # (these are normally in the phase1 parameter, but can be used also in the # phase2 parameter when EAP-TLS is used within the inner tunnel): # tls_allow_md5=1 - allow MD5-based certificate signatures (depending on the # TLS library, these may be disabled by default to enforce stronger # security) # tls_disable_time_checks=1 - ignore certificate validity time (this requests # the TLS library to accept certificates even if they are not currently # valid, i.e., have expired or have not yet become valid; this should be # used only for testing purposes) # tls_disable_session_ticket=1 - disable TLS Session Ticket extension # tls_disable_session_ticket=0 - allow TLS Session Ticket extension to be used # Note: If not set, this is automatically set to 1 for EAP-TLS/PEAP/TTLS # as a workaround for broken authentication server implementations unless # EAP workarounds are disabled with eap_workaround=0. # For EAP-FAST, this must be set to 0 (or left unconfigured for the # default value to be used automatically). # tls_disable_tlsv1_0=1 - disable use of TLSv1.0 # tls_disable_tlsv1_0=0 - explicitly enable use of TLSv1.0 (this allows # systemwide TLS policies to be overridden) # tls_disable_tlsv1_1=1 - disable use of TLSv1.1 (a workaround for AAA servers # that have issues interoperating with updated TLS version) # tls_disable_tlsv1_1=0 - explicitly enable use of TLSv1.1 (this allows # systemwide TLS policies to be overridden) # tls_disable_tlsv1_2=1 - disable use of TLSv1.2 (a workaround for AAA servers # that have issues interoperating with updated TLS version) # tls_disable_tlsv1_2=0 - explicitly enable use of TLSv1.2 (this allows # systemwide TLS policies to be overridden) # tls_disable_tlsv1_3=1 - disable use of TLSv1.3 (a workaround for AAA servers # that have issues interoperating with updated TLS version) # tls_disable_tlsv1_3=0 - enable TLSv1.3 (experimental - disabled by default) # tls_ext_cert_check=0 - No external server certificate validation (default) # tls_ext_cert_check=1 - External server certificate validation enabled; this # requires an external program doing validation of server certificate # chain when receiving CTRL-RSP-EXT_CERT_CHECK event from the control # interface and report the result of the validation with # CTRL-RSP_EXT_CERT_CHECK. # tls_suiteb=0 - do not apply Suite B 192-bit constraints on TLS (default) # tls_suiteb=1 - apply Suite B 192-bit constraints on TLS; this is used in # particular when using Suite B with RSA keys of >= 3K (3072) bits # allow_unsafe_renegotiation=1 - allow connection with a TLS server that does # not support safe renegotiation (RFC 5746); please note that this # workaround should be only when having to authenticate with an old # authentication server that cannot be updated to use secure TLS # implementation. # # Following certificate/private key fields are used in inner Phase2 # authentication when using EAP-TTLS or EAP-PEAP. # ca_cert2: File path to CA certificate file. This file can have one or more # trusted CA certificates. If ca_cert2 and ca_path2 are not included, # server certificate will not be verified. This is insecure and a trusted # CA certificate should always be configured. # ca_path2: Directory path for CA certificate files (PEM) # client_cert2: File path to client certificate file # private_key2: File path to client private key file # private_key2_passwd: Password for private key file # dh_file2: File path to DH/DSA parameters file (in PEM format) # subject_match2: Substring to be matched against the subject of the # authentication server certificate. See subject_match for more details. # altsubject_match2: Semicolon separated string of entries to be matched # against the alternative subject name of the authentication server # certificate. See altsubject_match documentation for more details. # domain_suffix_match2: Constraint for server domain name. See # domain_suffix_match for more details. # ocsp2: See ocsp for more details. # # Separate machine credentials can be configured for EAP-TEAP Phase 2 with # "machine_" prefix (e.g., "machine_identity") in the configuration parameters. # See the parameters without that prefix for more details on the meaning and # format of each such parameter. # # fragment_size: Maximum EAP fragment size in bytes (default 1398). # This value limits the fragment size for EAP methods that support # fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set # small enough to make the EAP messages fit in MTU of the network # interface used for EAPOL. The default value is suitable for most # cases. # # ocsp: Whether to use/require OCSP to check server certificate # 0 = do not use OCSP stapling (TLS certificate status extension) # 1 = try to use OCSP stapling, but not require response # 2 = require valid OCSP stapling response # 3 = require valid OCSP stapling response for all not-trusted # certificates in the server certificate chain # # openssl_ciphers: OpenSSL specific cipher configuration # This can be used to override the global openssl_ciphers configuration # parameter (see above). # # erp: Whether EAP Re-authentication Protocol (ERP) is enabled # # EAP-FAST variables: # pac_file: File path for the PAC entries. wpa_supplicant will need to be able # to create this file and write updates to it when PAC is being # provisioned or refreshed. Full path to the file should be used since # working directory may change when wpa_supplicant is run in the # background. Alternatively, a named configuration blob can be used by # setting this to blob:// # phase1: fast_provisioning option can be used to enable in-line provisioning # of EAP-FAST credentials (PAC): # 0 = disabled, # 1 = allow unauthenticated provisioning, # 2 = allow authenticated provisioning, # 3 = allow both unauthenticated and authenticated provisioning # fast_max_pac_list_len= option can be used to set the maximum # number of PAC entries to store in a PAC list (default: 10) # fast_pac_format=binary option can be used to select binary format for # storing PAC entries in order to save some space (the default # text format uses about 2.5 times the size of minimal binary # format) # # wpa_supplicant supports number of "EAP workarounds" to work around # interoperability issues with incorrectly behaving authentication servers. # These are enabled by default because some of the issues are present in large # number of authentication servers. Strict EAP conformance mode can be # configured by disabling workarounds with eap_workaround=0. # update_identifier: PPS MO ID # (Hotspot 2.0 PerProviderSubscription/UpdateIdentifier) # # roaming_consortium_selection: Roaming Consortium Selection # The matching Roaming Consortium OI that was used to generate this # network profile. # Station inactivity limit # # If a station does not send anything in ap_max_inactivity seconds, an # empty data frame is sent to it in order to verify whether it is # still in range. If this frame is not ACKed, the station will be # disassociated and then deauthenticated. This feature is used to # clear station table of old entries when the STAs move out of the # range. # # The station can associate again with the AP if it is still in range; # this inactivity poll is just used as a nicer way of verifying # inactivity; i.e., client will not report broken connection because # disassociation frame is not sent immediately without first polling # the STA with a data frame. # default: 300 (i.e., 5 minutes) #ap_max_inactivity=300 # DTIM period in Beacon intervals for AP mode (default: 2) #dtim_period=2 # Beacon interval (default: 100 TU) #beacon_int=100 # WPS in AP mode # 0 = WPS enabled and configured (default) # 1 = WPS disabled #wps_disabled=0 # FILS DH Group # 0 = PFS disabled with FILS shared key authentication (default) # 1-65535 = DH Group to use for FILS PFS #fils_dh_group=0 # DPP PFS # 0: allow PFS to be used or not used (default) # 1: require PFS to be used (note: not compatible with DPP R1) # 2: do not allow PFS to be used #dpp_pfs=0 # DPP Network introduction type # 0: unprotected variant from DPP R1 (default) # 1: privacy protecting (station Connector encrypted) variant from # DPP R3 #dpp_connector_privacy=0 # Whether beacon protection is enabled # This depends on management frame protection (ieee80211w) being enabled and # beacon protection support indication from the driver. # 0 = disabled (default) # 1 = enabled #beacon_prot=0 # OWE DH Group # 0: use default (19) first and then try all supported groups one by one if AP # rejects the selected group # 1-65535: DH Group to use for OWE # Groups 19 (NIST P-256), 20 (NIST P-384), and 21 (NIST P-521) are # currently supported. #owe_group=0 # OWE-only mode (disable transition mode) # 0: enable transition mode (allow connection to either OWE or open BSS) # 1 = disable transition mode (allow connection only with OWE) #owe_only=0 # OWE PTK derivation workaround # Initial OWE implementation used SHA256 when deriving the PTK for all # OWE groups. This was supposed to change to SHA384 for group 20 and # SHA512 for group 21. This parameter can be used to enable older # behavior mainly for testing purposes. There is no impact to group 19 # behavior, but if enabled, this will make group 20 and 21 cases use # SHA256-based PTK derivation which will not work with the updated # OWE implementation on the AP side. #owe_ptk_workaround=0 # Transition Disable indication # The AP can notify authenticated stations to disable transition mode # in their network profiles when the network has completed transition # steps, i.e., once sufficiently large number of APs in the ESS have # been updated to support the more secure alternative. When this # indication is used, the stations are expected to automatically # disable transition mode and less secure security options. This # includes use of WEP, TKIP (including use of TKIP as the group # cipher), and connections without PMF. # Bitmap bits: # bit 0 (0x01): WPA3-Personal (i.e., disable WPA2-Personal = WPA-PSK # and only allow SAE to be used) # bit 1 (0x02): SAE-PK (disable SAE without use of SAE-PK) # bit 2 (0x04): WPA3-Enterprise (move to requiring PMF) # bit 3 (0x08): Enhanced Open (disable use of open network; require # OWE) # SAE-PK mode # 0: automatic SAE/SAE-PK selection based on password; enable # transition mode (allow SAE authentication without SAE-PK) # 1: SAE-PK only (disable transition mode; allow SAE authentication # only with SAE-PK) # 2: disable SAE-PK (allow SAE authentication only without SAE-PK) #sae_pk=0 # MAC address policy # 0 = use permanent MAC address # 1 = use random MAC address for each ESS connection # 2 = like 1, but maintain OUI (with local admin bit set) #mac_addr=0 # disable_ht: Whether HT (802.11n) should be disabled. # 0 = HT enabled (if AP supports it) # 1 = HT disabled # # disable_ht40: Whether HT-40 (802.11n) should be disabled. # 0 = HT-40 enabled (if AP supports it) # 1 = HT-40 disabled # # disable_sgi: Whether SGI (short guard interval) should be disabled. # 0 = SGI enabled (if AP supports it) # 1 = SGI disabled # # disable_ldpc: Whether LDPC should be disabled. # 0 = LDPC enabled (if AP supports it) # 1 = LDPC disabled # # ht40_intolerant: Whether 40 MHz intolerant should be indicated. # 0 = 40 MHz tolerant (default) # 1 = 40 MHz intolerant # # ht_mcs: Configure allowed MCS rates. # Parsed as an array of bytes, in base-16 (ascii-hex) # ht_mcs="" // Use all available (default) # ht_mcs="0xff 00 00 00 00 00 00 00 00 00 " // Use MCS 0-7 only # ht_mcs="0xff ff 00 00 00 00 00 00 00 00 " // Use MCS 0-15 only # # disable_max_amsdu: Whether MAX_AMSDU should be disabled. # -1 = Do not make any changes. # 0 = Enable MAX-AMSDU if hardware supports it. # 1 = Disable AMSDU # # ampdu_factor: Maximum A-MPDU Length Exponent # Value: 0-3, see 7.3.2.56.3 in IEEE Std 802.11n-2009. # # ampdu_density: Allow overriding AMPDU density configuration. # Treated as hint by the kernel. # -1 = Do not make any changes. # 0-3 = Set AMPDU density (aka factor) to specified value. # # tx_stbc: Allow overriding STBC support for TX streams # Value: 0-1, see IEEE Std 802.11-2016, 9.4.2.56.2. # -1 = Do not make any changes (default) # 0 = Set if not supported # 1 = Set if supported # # rx_stbc: Allow overriding STBC support for RX streams # Value: 0-3, see IEEE Std 802.11-2016, 9.4.2.56.2. # -1 = Do not make any changes (default) # 0 = Set if not supported # 1 = Set for support of one spatial stream # 2 = Set for support of one and two spatial streams # 3 = Set for support of one, two and three spatial streams # disable_vht: Whether VHT should be disabled. # 0 = VHT enabled (if AP supports it) # 1 = VHT disabled # # vht_capa: VHT capabilities to set in the override # vht_capa_mask: mask of VHT capabilities # # vht_rx_mcs_nss_1/2/3/4/5/6/7/8: override the MCS set for RX NSS 1-8 # vht_tx_mcs_nss_1/2/3/4/5/6/7/8: override the MCS set for TX NSS 1-8 # 0: MCS 0-7 # 1: MCS 0-8 # 2: MCS 0-9 # 3: not supported # disable_eht: Whether EHT should be disabled. # 0 = EHT enabled (if supported) (default) # 1 = EHT disabled # multi_ap_backhaul_sta: Multi-AP backhaul STA functionality # 0 = normal STA (default) # 1 = backhaul STA # A backhaul STA sends the Multi-AP IE, fails to associate if the AP does not # support Multi-AP, and sets 4-address mode if it does. Thus, the netdev can be # added to a bridge to allow forwarding frames over this backhaul link. ##### Fast Session Transfer (FST) support ##################################### # # The options in this section are only available when the build configuration # option CONFIG_FST is set while compiling wpa_supplicant. They allow this # interface to be a part of FST setup. # # FST is the transfer of a session from a channel to another channel, in the # same or different frequency bands. # # For details, see IEEE Std 802.11ad-2012. # Identifier of an FST Group the interface belongs to. #fst_group_id=bond0 # Interface priority within the FST Group. # Announcing a higher priority for an interface means declaring it more # preferable for FST switch. # fst_priority is in 1..255 range with 1 being the lowest priority. #fst_priority=100 # Default LLT value for this interface in milliseconds. The value used in case # no value provided during session setup. Default is 50 msec. # fst_llt is in 1..4294967 range (due to spec limitation, see 10.32.2.2 # Transitioning between states). #fst_llt=100 # BSS Transition Management # disable_btm - Disable BSS transition management in STA # Set to 0 to enable BSS transition management (default behavior) # Set to 1 to disable BSS transition management #disable_btm=0 # Enable EDMG capability in STA/AP mode, default value is false #enable_edmg=1 # This value is used to configure the channel bonding feature. # Default value is 0. # Relevant only if enable_edmg is true # In AP mode it defines the EDMG channel to use for AP operation. # In STA mode it defines the EDMG channel for connection (if supported by AP). #edmg_channel=9 # Example blocks: # Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers network={ ssid="simple" psk="very secret passphrase" priority=5 } # Same as previous, but request SSID-specific scanning (for APs that reject # broadcast SSID) network={ ssid="second ssid" scan_ssid=1 psk="very secret passphrase" priority=2 } # Only WPA-PSK is used. Any valid cipher combination is accepted. network={ ssid="example" proto=WPA key_mgmt=WPA-PSK pairwise=CCMP TKIP group=CCMP TKIP WEP104 WEP40 psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb priority=2 } # WPA-Personal(PSK) with TKIP and enforcement for frequent PTK rekeying network={ ssid="example" proto=WPA key_mgmt=WPA-PSK pairwise=TKIP group=TKIP psk="not so secure passphrase" wpa_ptk_rekey=600 } # Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104 # or WEP40 as the group cipher will not be accepted. network={ ssid="example" proto=RSN key_mgmt=WPA-EAP pairwise=CCMP TKIP group=CCMP TKIP eap=TLS identity="user@example.com" ca_cert="/etc/cert/ca.pem" client_cert="/etc/cert/user.pem" private_key="/etc/cert/user.prv" private_key_passwd="password" priority=1 } # EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel # (e.g., Radiator) network={ ssid="example" key_mgmt=WPA-EAP eap=PEAP identity="user@example.com" password="foobar" ca_cert="/etc/cert/ca.pem" phase1="peaplabel=1" phase2="auth=MSCHAPV2" priority=10 } # EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the # unencrypted use. Real identity is sent only within an encrypted TLS tunnel. network={ ssid="example" key_mgmt=WPA-EAP eap=TTLS identity="user@example.com" anonymous_identity="anonymous@example.com" password="foobar" ca_cert="/etc/cert/ca.pem" priority=2 } # EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted # use. Real identity is sent only within an encrypted TLS tunnel. network={ ssid="example" key_mgmt=WPA-EAP eap=TTLS identity="user@example.com" anonymous_identity="anonymous@example.com" password="foobar" ca_cert="/etc/cert/ca.pem" phase2="auth=MSCHAPV2" } # WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner # authentication. network={ ssid="example" key_mgmt=WPA-EAP eap=TTLS # Phase1 / outer authentication anonymous_identity="anonymous@example.com" ca_cert="/etc/cert/ca.pem" # Phase 2 / inner authentication phase2="autheap=TLS" ca_cert2="/etc/cert/ca2.pem" client_cert2="/etc/cer/user.pem" private_key2="/etc/cer/user.prv" private_key2_passwd="password" priority=2 } # Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and # group cipher. network={ ssid="example" bssid=00:11:22:33:44:55 proto=WPA RSN key_mgmt=WPA-PSK WPA-EAP pairwise=CCMP group=CCMP psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb } # Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP # and all valid ciphers. network={ ssid=00010203 psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f } # EAP-SIM with a GSM SIM or USIM network={ ssid="eap-sim-test" key_mgmt=WPA-EAP eap=SIM pin="1234" pcsc="" } # EAP-PSK network={ ssid="eap-psk-test" key_mgmt=WPA-EAP eap=PSK anonymous_identity="eap_psk_user" password=06b4be19da289f475aa46a33cb793029 identity="eap_psk_user@example.com" } # IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using # EAP-TLS for authentication and key generation; require both unicast and # broadcast WEP keys. network={ ssid="1x-test" key_mgmt=IEEE8021X eap=TLS identity="user@example.com" ca_cert="/etc/cert/ca.pem" client_cert="/etc/cert/user.pem" private_key="/etc/cert/user.prv" private_key_passwd="password" eapol_flags=3 } # LEAP with dynamic WEP keys network={ ssid="leap-example" key_mgmt=IEEE8021X eap=LEAP identity="user" password="foobar" } # EAP-IKEv2 using shared secrets for both server and peer authentication network={ ssid="ikev2-example" key_mgmt=WPA-EAP eap=IKEV2 identity="user" password="foobar" } # EAP-FAST with WPA (WPA or WPA2) network={ ssid="eap-fast-test" key_mgmt=WPA-EAP eap=FAST anonymous_identity="FAST-000102030405" identity="username" password="password" phase1="fast_provisioning=1" pac_file="/etc/wpa_supplicant.eap-fast-pac" } network={ ssid="eap-fast-test" key_mgmt=WPA-EAP eap=FAST anonymous_identity="FAST-000102030405" identity="username" password="password" phase1="fast_provisioning=1" pac_file="blob://eap-fast-pac" } # Plaintext connection (no WPA, no IEEE 802.1X) network={ ssid="plaintext-test" key_mgmt=NONE } # Shared WEP key connection (no WPA, no IEEE 802.1X) network={ ssid="static-wep-test" key_mgmt=NONE wep_key0="abcde" wep_key1=0102030405 wep_key2="1234567890123" wep_tx_keyidx=0 priority=5 } # Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key # IEEE 802.11 authentication network={ ssid="static-wep-test2" key_mgmt=NONE wep_key0="abcde" wep_key1=0102030405 wep_key2="1234567890123" wep_tx_keyidx=0 priority=5 auth_alg=SHARED } # IBSS/ad-hoc network with RSN network={ ssid="ibss-rsn" key_mgmt=WPA-PSK proto=RSN psk="12345678" mode=1 frequency=2412 pairwise=CCMP group=CCMP } # IBSS/ad-hoc network with WPA-None/TKIP (deprecated) network={ ssid="test adhoc" mode=1 frequency=2412 proto=WPA key_mgmt=WPA-NONE pairwise=NONE group=TKIP psk="secret passphrase" } # open mesh network network={ ssid="test mesh" mode=5 frequency=2437 key_mgmt=NONE } # secure (SAE + AMPE) network network={ ssid="secure mesh" mode=5 frequency=2437 key_mgmt=SAE psk="very secret passphrase" } # Catch all example that allows more or less all configuration modes network={ ssid="example" scan_ssid=1 key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE pairwise=CCMP TKIP group=CCMP TKIP WEP104 WEP40 psk="very secret passphrase" eap=TTLS PEAP TLS identity="user@example.com" password="foobar" ca_cert="/etc/cert/ca.pem" client_cert="/etc/cert/user.pem" private_key="/etc/cert/user.prv" private_key_passwd="password" phase1="peaplabel=0" } # Example of EAP-TLS with smartcard (openssl engine) network={ ssid="example" key_mgmt=WPA-EAP eap=TLS proto=RSN pairwise=CCMP TKIP group=CCMP TKIP identity="user@example.com" ca_cert="/etc/cert/ca.pem" # Certificate and/or key identified by PKCS#11 URI (RFC7512) client_cert="pkcs11:manufacturer=piv_II;id=%01" private_key="pkcs11:manufacturer=piv_II;id=%01" # Optional PIN configuration; this can be left out and PIN will be # asked through the control interface pin="1234" } # Example configuration showing how to use an inlined blob as a CA certificate # data instead of using external file network={ ssid="example" key_mgmt=WPA-EAP eap=TTLS identity="user@example.com" anonymous_identity="anonymous@example.com" password="foobar" ca_cert="blob://exampleblob" priority=20 } blob-base64-exampleblob={ SGVsbG8gV29ybGQhCg== } # Wildcard match for SSID (plaintext APs only). This example select any # open AP regardless of its SSID. network={ key_mgmt=NONE } # Example configuration ignoring two APs - these will be ignored # for this network. network={ ssid="example" psk="very secret passphrase" bssid_ignore=02:11:22:33:44:55 02:22:aa:44:55:66 } # Example configuration limiting AP selection to a specific set of APs; # any other AP not matching the masked address will be ignored. network={ ssid="example" psk="very secret passphrase" bssid_accept=02:55:ae:bc:00:00/ff:ff:ff:ff:00:00 00:00:77:66:55:44/00:00:ff:ff:ff:ff } # Example config file that will only scan on channel 36. freq_list=5180 network={ key_mgmt=NONE } # Example configuration using EAP-TTLS for authentication and key # generation for MACsec network={ key_mgmt=IEEE8021X eap=TTLS phase2="auth=PAP" anonymous_identity="anonymous@example.com" identity="user@example.com" password="secretr" ca_cert="/etc/cert/ca.pem" eapol_flags=0 macsec_policy=1 } # Example configuration for MACsec with preshared key network={ key_mgmt=NONE eapol_flags=0 macsec_policy=1 mka_cak=0123456789ABCDEF0123456789ABCDEF mka_ckn=6162636465666768696A6B6C6D6E6F707172737475767778797A303132333435 mka_priority=128 }