Commit graph

16932 commits

Author SHA1 Message Date
Jouni Malinen
32d3360f33 DPP: Fix a typo in a comment
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-29 21:35:26 +03:00
Jouni Malinen
5a7bcb7725 OSEN: Do not send the actual BIGTK to OSEN STAs
OSEN STAs are not authenticated, so do not send the actual BIGTK for
them so that they cannot generate forged protected Beacon frames. This
means that OSEN STAs cannot enable beacon protection.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-29 21:25:02 +03:00
Jouni Malinen
2d6cc0e670 FT: Do not expose GTK/IGTK in FT Reassociation Response frame in OSEN
Do not include the actual GTK/IGTK value in FT protocol cases in OSEN or
with DGAF disabled (Hotspot 2.0). This was already the case for the
EAPOL-Key cases of providing GTK/IGTK, but the FT protocol case was
missed. OSEN cannot really use FT, so that part is not impacted, but it
would be possible to enable FT in a Hotspot 2.0 network that has DGAF
disabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-29 21:25:02 +03:00
Jouni Malinen
a998337895 WNM: Do not expose GTK/IGTK in WNM Sleep Mode Response frame in OSEN
Do not include the actual GTK/IGTK value in WNM Sleep Mode Response
frame if WNM Sleep Mode is used in OSEN or in a network where use of GTK
is disabled. This was already the case for the EAPOL-Key cases of
providing GTK/IGTK, but the WNM Sleep Mode exit case was missed.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-29 21:04:40 +03:00
Jouni Malinen
b50b8f0429 tests: HS 2.0 deauthentication request PMF misbehavior (+HTC)
Verify driver/mac80211 behavior with HT Control field in Public Action
frames.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-29 20:55:18 +03:00
Jouni Malinen
eff431ff38 tests: OWE transition mode with owe_transition_ifname
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-26 16:23:39 +03:00
Hu Wang
d578e890eb OWE: Skip beacon update of transition BSS if it is not yet enabled
When a single hostapd process manages both the OWE and open BSS for
transition mode, owe_transition_ifname can be used to clone the
transition mode information (i.e., BSSID/SSID) automatically. When both
BSSs use ACS, the completion of ACS on the 1st BSS sets state to
HAPD_IFACE_ENABLED and the OWE transition mode information is updated
for all the other BSSs. However, the 2nd BSS is still in the ACS phase
and the beacon update messes up the state for AP startup and prevents
proper ACS competion.

If 2nd BSS is not yet enabled (e.g., in ACS), skip beacon update and
defer OWE transition information cloning until the BSS is enabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-26 16:23:39 +03:00
Jouni Malinen
9818fbe9bc tests: Enforce proper OCV behavior for SA Query Response from STA
Now that there is a pending mac80211 patch ("mac80211: allow SA-QUERY
processing in userspace") to allow wpa_supplicant to take care of SA
Query Request processing, start enforcing correct behavior for this in
ocv_sa_query and wpa2_ocv_sta_override_sa_query_resp.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-26 12:31:16 +03:00
Sachin Ahuja
88436baaac Add a vendor attribute to get OEM data
Add an attribute QCA_WLAN_VENDOR_ATTR_OEM_DATA_RESPONSE_EXPECTED
to get the response for the queried data.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 23:40:01 +03:00
Sunil Dutt
3f9a89ca1c Vendor attributes for configuring LDPC, TX STBC, RX STBC
Defines the attributes in SET(GET)_WIFI_CONFIGURATION to dynamically
configure capabilities: LDPC, TX STBC, RX STBC.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 23:34:37 +03:00
Jouni Malinen
b96a3bd5df tests: sigma_dut controlled STA using OCV
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 23:24:55 +03:00
Jouni Malinen
38163b193e tests: OCV and post-CSA SA Query error cases
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 21:57:04 +03:00
Jouni Malinen
8ee0bc622a OCV: Disconnect STAs that do not use SA Query after CSA
Verify that all associated STAs that claim support for OCV initiate an
SA Query after CSA. If no SA Query is seen within 15 seconds,
deauthenticate the STA.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 21:57:04 +03:00
Jouni Malinen
01ceb88c77 OCV: Report validation errors for (Re)Association Request frames
Add the OCV-FAILURE control interface event to notify upper layers of
OCV validation issues in FT and FILS (Re)Association Request frames.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 20:46:32 +03:00
Jouni Malinen
5071248bd4 tests: OCV with OCI override on STA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 19:11:36 +03:00
Jouni Malinen
a3556d5813 OCV: Report validation errors for EAPOL-Key messages in AP mode
Add the OCV-FAILURE control interface event to notify upper layers of
OCV validation issues in EAPOL-Key msg 2/4 and group 2/2.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 19:09:12 +03:00
Jouni Malinen
d52067a5b6 OCV: Report validation errors for SA Query Request/Response in AP mode
Add a new OCV-FAILURE control interface event to notify upper layers of
OCV validation issues. This commit adds this for SA Query processing in
AP mode.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 18:42:00 +03:00
Jouni Malinen
52579be860 OCV: Move "OCV failed" prefix to callers
Make reporting of OCV validation failure reasons more flexible by
removing the fixed prefix from ocv_verify_tx_params() output in
ocv_errorstr so that the caller can use whatever prefix or encapsulation
that is most appropriate for each case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 18:34:59 +03:00
Vamsi Krishna
2d118f557a OCV: Add support to override channel info OCI element (STA)
To support the STA testbed role, the STA has to use specified channel
information in OCI element sent to the AP in EAPOL-Key msg 2/4, SA Query
Request, and SA Query Response frames. Add override parameters to use
the specified channel while populating OCI element in all these frames.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 18:01:44 +03:00
Jouni Malinen
c2080e8657 Clear current PMKSA cache selection on association/roam
It was possible for the RSN state machine to maintain old PMKSA cache
selection (sm->cur_pmksa) when roaming to another BSS based on
driver-based roaming indication. This could result in mismatching state
and unexpected behavior, e.g., with not generating a Suite B PMKSA cache
entry.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 16:25:50 +03:00
Jouni Malinen
bf47f0542f tests: Suite B using PMKSA caching and roaming
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 16:20:33 +03:00
Jouni Malinen
6e47dd04ff wlantest: Fix RSNE check in FT 4-way handshake msg 3/4
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-25 13:42:08 +03:00
Jouni Malinen
b6a3bcffd7 wlantest: Validate FT elements in Reassociation Response frame
Verify that RSNE, MDE, and FTE have valid information in FT
Reassociation Response frames. In addition, decrypt GTK, IGTK, and BIGTK
from the frame.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-24 00:35:56 +03:00
Jouni Malinen
e10144c910 wlantest: Validate FT elements in Reassociation Request frame
Verify that RSNE, MDE, and FTE have valid information in FT
Reassociation Request frames.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-24 00:35:53 +03:00
Jouni Malinen
59d9994ac7 wlantest: Store PMK-R1 in STA entry
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-23 22:01:12 +03:00
Jouni Malinen
d9532eb70f Debug print PMK-R0/R1 and PMKR0/R1Name in the helper functions
There is no need to have all callers debug print these separately.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-23 21:45:29 +03:00
Jouni Malinen
bfc4569f89 wlantest: Store PMK-R0 length explicitly
PMK-R0 is not of fixed length, so store its length explicitly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-23 21:45:20 +03:00
Jouni Malinen
7cd17a4b5e wlantest: Handle FT over-the-DS association state update cleanly
It is expected for the STA entry on the target AP to move directly from
State 1 to State 3 when performing FT over-the-DS (i.e., FT Action
Request/Response frame exchange through the old AP followed by
Reassociation Request/Response frame exchange with the target AP).

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-23 21:11:33 +03:00
Min Liu
5ab8ad4cfe Vendor attributes for ssetting TX A-MSDU and RX A-MSDU parameters
Define QCA vendor attributes for SET(GET)_WIFI_CONFIGURATION to
dynamically configure capabilities for TX A-MSDU and RX A-MSDU.

Signed-off-by: Min Liu <minliu@codeaurora.org>
2020-05-21 00:53:20 +03:00
Min Liu
f7a904a283 QCA vendor command for adding and deleting TSPEC
Add a QCA vendor subcommand QCA_NL80211_VENDOR_SUBCMD_CONFIG_TSPEC
to add and delete TSPEC in STA mode.
The attributes defined in enum qca_wlan_vendor_attr_config_tspec
are used to encapsulate required information.

Signed-off-by: Min Liu <minliu@codeaurora.org>
2020-05-21 00:48:11 +03:00
Kiran Kumar Lokere
82867456e9 Vendor attributes to configure PMF protection and disassoc Tx for testing
Add new QCA vendor attributes to configure misbehavior for PMF
protection for Management frames and to inject Disassociation frames.

These attributes are used for testing purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-21 00:35:54 +03:00
Vamsi Krishna
e5e2757455 Add QCA vendor interface support to configure PHY modes
Add an attribute that can be used with
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION vendor command to
configure different PHY modes to the driver/firmware.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-21 00:33:55 +03:00
Sunil Dutt
db0d0b84af nl80211: Control the registration for RRM frame with driver_param
wpa_supplicant registered to process the Radio Measurement Request
frames unconditionally. This would prevent other location based
applications from handling these frames. Enable such a use case by
allowing wpa_supplicant to be configured not to register to process
these frames. This can now be done by adding "no_rrm=1" to the
driver_param configuration parameter.

In addition, wpa_driver_nl80211_init() does not have the provision to
take driver_params. Hence, resubscribe again with cfg80211 when this
driver parameter "no_rrm=1" is set after the initial setup steps.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-21 00:30:54 +03:00
Rajkumar Manoharan
dd2daf0848 HE: Process HE 6 GHz band capab from associating HE STA
Process HE 6 GHz band capabilities in (Re)Association Request frames and
pass the information to the driver.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2020-05-17 17:22:34 +03:00
Rajkumar Manoharan
db603634a9 HE: Add 6 GHz Band Capabilities element in Beacon and response frames
Construct HE 6 GHz Band Capabilities element (IEEE 802.11ax/D6.0,
9.4.2.261) from HT and VHT capabilities and add it to Beacon, Probe
Response, and (Re)Association Response frames when operating on the 6
GHz band.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2020-05-17 16:47:18 +03:00
Rajkumar Manoharan
88911a0aa4 HE: Add HE 6 GHz Band Capabilities into ieee802_11_parse_elems()
Handle 6 GHz band capability element parsing for association.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2020-05-17 16:38:00 +03:00
Rajkumar Manoharan
b2c0b83c66 HE: Remove VHT Operation Information from HE Operation element
The VHT Operation Information subfield is conditonally present, so do
not hardcoded it in struct ieee80211_he_operation. These members of the
struct are not currently used, so these can be removed without impact to
functionality.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2020-05-17 16:32:49 +03:00
Rajkumar Manoharan
e297a5bfda HE: Define 6 GHz band capability elements
Defines IEEE P802.11ax/D6.0, 9.4.2.261 HE 6 GHz Band Capabilities
element and 6 GHz Operation Information field of HE Operation element
(IEEE P802.11ax/D6.0, Figure 9-787k).

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2020-05-17 16:24:08 +03:00
Davide Caratti
39f29f250a defconfig: Enable TDLS
Some distros (e.g., Debian and Arch) already build wpa_supplicant with
support for TDLS, and Fedora is about to enable this feature as well.
Set CONFIG_TDLS=y in wpa_supplicant default build configuration.

Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
2020-05-17 16:10:03 +03:00
Jouni Malinen
0132a72922 tests: Use test-name.* style files more consistently
Use params['prefix'] to build the file names for dynamically generated
files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-17 16:03:29 +03:00
Jouni Malinen
78c823de4e tests: Handle unexpected get_driver_status_field() error
If the current country code cannot be fetched, do not try to report the
current value in the log since that will result in TypeError exception.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-17 13:04:26 +03:00
Jouni Malinen
f382af2c1e tests: Avoid hapd reference before assignment on error cases
Couple of VHT test cases missed explicit setting of hapd to None before
trying to start hostapd. Add those to avoid unexpected exceptions in
case hostapd start fails.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-17 12:59:53 +03:00
Jouni Malinen
7134b2a548 tests: Add description for test cases that were missing it
All test_*() functions are expected to use __doc__ to provide a short
description of the test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-17 01:31:19 +03:00
Jouni Malinen
49d1f9c98e tests: Unify ignore_old_scan_res resetting
Add a decorator that clears ignore_old_scan_res parameter value instead
of doing this with try/finally in large number of test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-17 01:31:19 +03:00
Johannes Berg
570ae3ef54 tests: Unify IPv6 disabling
Add a decorator that disables IPv6 and requires running
under a VM, rather than open-coding that many times.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-17 01:31:19 +03:00
Jouni Malinen
87c8e86da9 tests: Fix ACS freqlist testing
The freqlist parameter uses comma, not space, separated values. Add
another test case for checking freqlist values that do not use the
preferred channel numbers to make sure the frequency list is actually
used as a constraint for selecting the channel.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-17 01:31:19 +03:00
neo_jou
025ab330b4 ACS: Channel selection based freqlist
When doing ACS, check freqlist also if it is specified.

Signed-off-by: neojou <neojou@gmail.com>
2020-05-17 01:31:19 +03:00
Johannes Berg
34ac7d871a tests: Delayed group rekey retransmit test for IGTK
Add a test for delayed group rekey retransmission that checks that
the IGTK is protected against it by not resetting the IPN replay
counter when reinstalling such a key.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-17 01:31:19 +03:00
Johannes Berg
7f508ff968 tests: Reset the correct key's PN for group key handshake testing
While adding support for IGTK and BIGTK here, I tested this without
protections (i.e., with protections removed from both wpa_supplicant and
the driver), and while I got some bad resets on the debugfs values, it
should have failed with "unexpected connectivity".

Fix this to be correct - we need to reset the GTK PN, not the PTK PN in
this test.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-17 01:31:19 +03:00
Johannes Berg
889218c14a tests: Extend debugfs key state reading for IGTK/BIGTK
Extend the debugfs read helpers to work with IGTK and BIGTK.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-17 01:31:19 +03:00