Commit graph

194 commits

Author SHA1 Message Date
Sunil Dutt
f933216141 Revert "Assign QCA vendor command and attribute for Tx/Rx aggregation"
This reverts commit 4ca16b5fd7.
Configuration for this will be done using a previously assigned more
generic command. This new command
QCA_NL80211_VENDOR_SUBCMD_SET_TXRX_AGGREGATION has not been used in any
driver version and won't be used, so the assigned command id can be
freed for future use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-31 16:27:24 +03:00
Sunil Dutt
4ca16b5fd7 Assign QCA vendor command and attribute for Tx/Rx aggregation
Assign nl80211 vendor command
QCA_NL80211_VENDOR_SUBCMD_SET_TXRX_AGGREGATION and corresponding
attributes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-17 20:53:25 +02:00
Jouni Malinen
f85399f396 Reserve QCA vendor specific nl80211 commands 116..118
These are reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-08 23:08:45 +02:00
Peng Xu
9a8d9f7c62 Assign QCA vendor command and attribute for Tx power reduction in dB
Assign nl80211 vendor command
QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB and corresponding
attributes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-19 11:34:31 +02:00
Ravi Joshi
d381963385 Extend QCA roam event with subnet change indication
The new attribute can be used with
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH to indicate whether the IP
subnet was detected to have changed when processing offloaded roam/key
management.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-16 19:00:35 +02:00
Jouni Malinen
9578413455 Reserve QCA vendor specific nl80211 commands 110..114
These are reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-27 00:10:29 +02:00
Peng Xu
5d4c508969 Assign QCA commands and attributes for Tx power scaling and OTA testing
Assign nl80211vendor commands QCA_NL80211_VENDOR_SUBCMD_OTA_TEST and
QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE as well as corresponding
attributes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-27 00:07:15 +02:00
Kanchanapally, Vidyullatha
94fb165c3a Add QCA vendor definitions for simultaneous offchannel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 01:41:46 +03:00
Kanchanapally, Vidyullatha
b48567195d Add QCA vendor definitions for vendor scan support
Introduce definitions for QCA vendor specific subcommands
and attributes to support vendor scan request.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 01:41:46 +03:00
Jouni Malinen
b43b2b5203 Define new registry for QCA vendor specific elements
The new enum qca_vendor_element_id registry is used to manage
assignments of vendor specific elements using the QCA OUI 00:13:74. The
initial assignment is for the purpose for extending P2P functionality
for cases where the wpa_supplicant implementation is used by both ends
of an exchange.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-30 22:13:47 +03:00
Peng Xu
d0cdccd307 Fix generating offloaded ACS channel list when hw_mode is set to any
When ACS is offloaded to device driver and the hw_mode parameter is set
to any, the current_mode structure is NULL which fails the ACS command.
Fix this by populating the ACS channel list with channels from all bands
when current_mode is NULL.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-28 23:22:24 +03:00
Srinivas Dasari
844dfeb804 QCA vendor command support to set band to driver
Add vendor command to pass SET setband command to the driver and read
the updated channel list from driver when this notification succeeds.
This allows the driver to update its internal channel lists based on
setband configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-28 21:00:18 +03:00
Ahmad Kholaif
6b0ceee929 Add QCA vendor definitions for multi-port concurrency
Introduce definitions for QCA vendor specific subcommands and attributes
to support multiport concurrency.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-22 11:50:01 +03:00
Ravi Joshi
d71bdfbd83 Add QCA vendor command for updating gateway parameters
Add vendor command for updating gateway parameters to the driver.

Signed-off-by: Ravi Joshi <ravij@qca.qualcomm.com>
2015-07-21 13:20:08 +03:00
Peng Xu
3784c0589e Extend hw_mode to support any band for offloaded ACS case
When device supports dual band operations with offloaded ACS, hw_mode
can now be set to any band (hw_mode=any) in order to allow ACS to select
the best channel from any band. After a channel is selected, the hw_mode
is updated for hostapd.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-27 12:17:57 +03:00
Sunil Dutt
279724d835 Add QCA vendor subcmd for Link Property Query
Link Property query vendor command shall facilitate the information
of the Wi-Fi link. MAC address of the Wi-Fi peer is given as an input
for querying the link properties.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-05-07 18:53:23 +03:00
Jouni Malinen
90758f09ec Mark QCA vendor command id 53 reserved, but not used anymore
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 11:21:18 +03:00
Jouni Malinen
7f90a234b6 Add QCA vendor subcmd for OCB
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-04-22 01:05:52 +03:00
Manikandan Mohan
857d94225a Extend offloaded ACS QCA vendor command to support VHT
Update ACS driver offload feature for VHT configuration. In addition,
this allows the chanlist parameter to be used to specify which channels
are included as options for the offloaded ACS case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-23 12:18:05 +02:00
Sunil Dutt
b2329e4ad5 Add QCA vendor subcmd for Data Offload
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-07 19:19:30 +02:00
Jouni Malinen
f2f65dd685 Reserve QCA vendor specific nl80211 commands 61..90
These are reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 15:46:49 +02:00
Ahmad Kholaif
480994dafb nl80211: Allocate QCA vendor subcmds for DFS radar detected and CAC events
When DFS offloading capability is supported by the driver, the driver
should use these events to indicate when a radar pattern has been
detected, channel availability check (CAC) has been completed, aborted
or finished after the non-occupancy period is over on a DFS channel.

Also, add a new driver.h event to be used by NL80211 to indicate CAC
Started event on a DFS channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-11 16:51:33 +02:00
Ahmad Kholaif
e0761c5b4a nl80211: Allocate QCA vendor subcmd for DFS CAC Start event
When DFS offloading capability is supported by the driver, the driver
should use this event to indicate when channel availability check (CAC)
is started on a DFS channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-09 18:48:36 +02:00
Jouni Malinen
1db718b3ce nl80211: Test vendor command and event
This adds testing code (for CONFIG_TESTING_OPTIONS=y builds only) to
send an nl80211 vendor command and report a test vendor event in case
the driver supports this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-02-09 18:07:29 +02:00
Chet Lanctot
15badebd47 nl80211: Add QCA vendor specific query of device/driver features
This commit introduces a QCA vendor command that allows interrogation of
the vendor-specific features supported by the device/driver. Currently
the only defined feature is the ability to offload key management.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-09 21:08:21 +02:00
Peng Xu
16689c7cfc hostapd: Allow ACS to be offloaded to the driver
Using QCA vendor command, allow ACS function to be offloaded to the
driver. Once channels are selected, hostapd is notified to perform OBSS
operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-03 22:31:53 +02:00
Jouni Malinen
994d6f4629 Add a name for an assigned QCA nl80211 vendor subcmd
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-02 23:36:12 +02:00
Jouni Malinen
e48635cfb0 Rename QCA nl80211 vendor subcmds to match AOSP names
This makes the enum vendor_subcmds definitions more consistent with the
names used in Android.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-12-02 16:20:35 +02:00
Jouni Malinen
37df6a87dd Add names for assigned QCA nl80211 vendor subcmds
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-21 21:46:01 +02:00
Jouni Malinen
066371ad52 Reserve QCA vendor specific nl80211 commands 53
These is reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-20 20:36:59 +02:00
Jouni Malinen
41a233572e Assign QCA vendor specific nl80211 command id 52 for APFIND
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-13 16:27:23 +02:00
Chet Lanctot
b41f26845a Add support for offloading key management operations to the driver
This commit introduces a QCA vendor command and event to provide an
option to use extended versions of the nl80211 connect/roam operations
in a way that allows drivers to offload key management operations to the
driver/firmware.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-23 18:38:50 +03:00
Jouni Malinen
d5fe4e6c18 Reserve QCA vendor specific nl80211 commands 34..49
These are reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-07 20:08:47 +03:00
Jouni Malinen
0800f9ee6c nl80211: Add roaming policy update using QCA vendor command
This allows updating roaming policy for drivers that select the BSS
internally so that wpa_supplicant (based on bssid parameter
configuration) and the driver remain in sync.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-11 15:59:42 +03:00
Jouni Malinen
2a57c33e25 Reserve QCA vendor specific nl80211 commands 20..33
These are reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-05 17:03:17 +03:00
Amar Singhal
84df167554 nl80211: Add vendor attribute for interface index
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-05 16:57:52 +03:00
Jouni Malinen
2396f02a43 Reserve QCA vendor specific nl80211 commands 14..19
These are reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-22 16:29:48 +03:00
Jouni Malinen
a26582cb98 Make qca-vendor.h independent of other header files
Move the definitions that depended in common.h into a separate header
file so that qca-vendor.h can be copied and used as-is in other
projects.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-25 11:41:36 +03:00
Amar Singhal
4a64d5a9db nl80211: Allocate QCA vendor subcmd for extended statistics
This allocates a QCA vendor subcmd for extended statistics
functionality and also an attribute for delivering the payload
for extended statistics.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-25 11:36:11 +03:00
Johannes Berg
30476e4fe7 wlantest: Tag and ignore generated packets
Rather than ignoring packets with a minimal 8-byte radiotap
header, which may occur elsewhere, tag generated (decrypted)
packets with an empty vendor namespace tag and ignore those.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-13 23:54:25 +03:00
Amarnath Hullur Subramanyam
4a16a0bd55 nl80211: Add QCA vendor subcmd for NAN
QCA vendor extension is used for NAN functionality. This defines the
subcommand and attribute to address this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-07 17:13:08 +03:00
Amar Singhal
65d645ce43 nl80211: Fetch DFS offload capability from driver
This uses a QCA vendor extension to determine if the driver supports
fully offloaded DFS operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-22 21:20:32 +02:00
Arif Hussain
253f2e3795 P2P: Apply unsafe frequency rules to available channels
This adds a QCA vendor specific nl80211 event to allow the driver to
indicate a list of frequency ranges that should be avoided due to
interference or possible known co-existance constraints. Such
frequencies are marked as not allowed for P2P use to force groups to be
formed on different channels.

If a P2P GO is operating on a channel that the driver recommended not to
use, a notification about this is sent on the control interface and
upper layer code may decide to tear down the group and optionally
restart it on another channel. As a TODO item, this could also be changed
to use CSA to avoid removing the group.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-27 11:49:05 +02:00
Jouni Malinen
1682c62360 Add a header file defining QCA OUI and vendor extensions
This file is used as a registry of identifier assignments from the
Qualcomm Atheros OUI 00:13:74 for purposes other than MAC address
assignment. One of the first uses will be for nl80211 vendor
commands/events which is reason for the preparation change in
driver_nl80211.c

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2014-01-24 15:58:00 +02:00