The AP side may not have had enough time to configure the new TK into
the driver if the connectivity test is started immediately after the
station side event.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
When going through 4-way handshake, the station side reports
CTRL-EVENT-CONNECTED after having sent out EAPOL-Key msg 4/4. The AP
side reports AP-STA-CONNECT after having completed processing of this
frame. Especially when using UML with time travel, it is possible for
the connectivity test to be started before the AP side has configured
the pairwise TK if the test is triggered based on CTRL-EVENT-CONNECTED
instead of AP-STA-CONNECT.
Add explicit wait for AP-STA-CONNECT in some of these cases to reduce
likelihood of reporting failures for test cases that are actually
behaving as expected. This shows up with "dev1->dev2 unicast data
delivery failed" in the test log.
Do the same before requesting reauthentication from the station side
since that has a similar issue with the EAPOL-Start frame getting
encrypted before the AP is ready for it.
Signed-off-by: Jouni Malinen <j@w1.fi>
This helps in avoiding issues with another test case trying to bind to
the same UDP port and failing due to the previous use by pyrad still
being open. This showed up with failures in radius_ipv6 when it followed
a test case like eap_proto_tls with suitable set of test cases between
them.
Signed-off-by: Jouni Malinen <j@w1.fi>
Test case sequence "persistent_group_channel scan_bss_expiration_count"
was failing with UML when using time travel. This seemed to be because
there was no explicit wait to confirm that the AP has been fully
disabled before running the next scan. Work around this by verifying
that hostapd has terminated the BSS and waiting a bit after that before
proceeding.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
ap_vht160_no_dfs fails with this message:
---------------
wlan0: Country code not reset back to 00: is ZA
wlan0: Country code cleared back to 00
---------------
hostap commit 91b6eba773
'Move MAC address randomization enable/disable to helper functions'.
wireless-testing commit 66c112cbd1d44d05322bb4eef908c82a68adbb5e
tag: wt-2019-06-26.
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
wep_ht_vht fails with this message:
---------------
wlan0: Country code not reset back to 00: is SE
wlan0: Country code cleared back to 00
---------------
hostap commit 91b6eba773
'Move MAC address randomization enable/disable to helper functions'.
wireless-testing commit 66c112cbd1d44d05322bb4eef908c82a68adbb5e
tag: wt-2019-06-26.
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_wps_conf_5ghz fails with this message:
---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------
hostap commit 91b6eba773
'Move MAC address randomization enable/disable to helper functions'.
wireless-testing commit 66c112cbd1d44d05322bb4eef908c82a68adbb5e
tag: wt-2019-06-26.
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_acs_vht160 fails with this message:
---------------
wlan0: Country code not reset back to 00: is ZA
wlan0: Country code cleared back to 00
---------------
hostap commit 91b6eba773
'Move MAC address randomization enable/disable to helper functions'.
wireless-testing commit 66c112cbd1d44d05322bb4eef908c82a68adbb5e
tag: wt-2019-06-26.
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_acs_vht40 fails with this message:
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
hostap commit 91b6eba773
'Move MAC address randomization enable/disable to helper functions'.
wireless-testing commit 66c112cbd1d44d05322bb4eef908c82a68adbb5e
tag: wt-2019-06-26.
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_acs_vht fails with this message:
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
hostap commit 91b6eba773
'Move MAC address randomization enable/disable to helper functions'.
wireless-testing commit 66c112cbd1d44d05322bb4eef908c82a68adbb5e
tag: wt-2019-06-26.
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_acs_5ghz_40mhz fails with this message:
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
hostap commit 91b6eba773
'Move MAC address randomization enable/disable to helper functions'.
wireless-testing commit 66c112cbd1d44d05322bb4eef908c82a68adbb5e
tag: wt-2019-06-26.
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_acs_5ghz fails with this message:
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
hostap commit 91b6eba773
'Move MAC address randomization enable/disable to helper functions'.
wireless-testing commit 66c112cbd1d44d05322bb4eef908c82a68adbb5e
tag: wt-2019-06-26.
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
rrm_beacon_req_passive_scan_vht fails with this message:
---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------
hostap commit 91b6eba773
'Move MAC address randomization enable/disable to helper functions'.
wireless-testing commit 66c112cbd1d44d05322bb4eef908c82a68adbb5e
tag: wt-2019-06-26.
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
This removes the separate rerun step from the parallel-vm.py processing
and instead, simply requeues the failed test cases into the same queue
that is used for the initial run. This is simpler and more efficient
since reruns start as soon as any VM is ready for processing them
instead of having to wait for all VMs to complete the first round.
Furthermore, this allows VMs to be stopped sooner when no more test
cases remain and that is helpful especially with the time travel patches
that make the wait-for-next-test step in the VM use all available CPU.
Signed-off-by: Jouni Malinen <j@w1.fi>
Enable all supported groups in the existing ap_wpa2_eap_pwd_groups and
ap_wpa2_eap_pwd_invalid_group test cases to maintain current testing
functionality once wpa_supplicant is modified to use a different default
for the enabled groups.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Test names can now use wildcard in the end (e.g., ap_wpa2_psk*) to match
all test cases with the specified prefix.
Signed-off-by: Jouni Malinen <j@w1.fi>
scan_dfs fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
p2p_go_move_scm_peer_does_not_support fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
p2p_channel_5ghz_165_169_us fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
p2p_channel_5ghz_only fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
autogo_ht_vht fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
p2p_autogo_pref_chan_not_in_regulatory fails with this message.
---------------
wlan0: Country code not reset back to 00: is SE
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_vht80_to_24g_ht fails with this message.
---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_vht_40_fallback_to_20 fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_vht_tkip fails with this message.
---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
prefer_vht40 fails with this message.
---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_vht80_csa fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_vht80plus80_invalid fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_vht160_no_ht40 fails with this message.
---------------
wlan0: Country code not reset back to 00: is ZA
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_vht_40 fails with this message.
---------------
wlan0: Country code not reset back to 00: is DE
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_vht_20 fails with this message.
---------------
wlan0: Country code not reset back to 00: is DE
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_vht80_invalid2 fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_vht80_invalid fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_vht_wifi_generation fails with this message.
---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_vht80 fails with this message.
---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_wps_conf_chan14 fails with this message.
---------------
wlan0: Country code not reset back to 00: is JP
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_acs_vht160_scan_disable fails with this message.
---------------
wlan0: Country code not reset back to 00: is ZA
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
rrm_beacon_req_passive_scan_vht160 fails with this message.
---------------
wlan0: Country code not reset back to 00: is ZA
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
rrm_beacon_req_table_vht fails with this message.
---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_ht40_5ghz_disabled_sec fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_ht40_5ghz_invalid_pair fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_track_sta_force_2ghz fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_track_sta_force_5ghz fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_track_sta_no_auth_passive fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_track_sta_no_auth fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_track_sta_no_probe_resp fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_track_sta fails with this message.
---------------
wlan0: Country code not reset back to 00: is US
wlan0: Country code cleared back to 00
---------------
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
nfc_wps_handover_chan14 fails with this message.
---------------
wlan0: Country code not reset back to 00: is JP
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_vht_use_sta_nsts fails with this message.
---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_vht_capab_not_supported fails with this message.
---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
ap_vht80c/d fails with this message.
---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
dfs_radar2 fails with this message.
---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Matching with roaming_consortium requires EAP type to be specified to
work for the connection. This test case was not really testing the
connection part, so this has not been much of an issue in the past, but
in preparation for the matching rules to start filtering out invalid
credential configurations from selection, the EAP type needs to be
explicitly set here.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
src/*/Makefile needs to allow additional CFLAGS values to be provided
from the calling Makefiles so that the clang command line arguments to
enable sanitizers consistently. In addition, it can be useful to be able
to provide CC, CFLAGS, and LDFLAGS from external setup while still
requesing LIBFUZZER=y build. Allow that by not overriding these
variables if they are already set.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
This struct needs to remain valid through the lifetime of the
authenticator state machine, so move it to the context struct instead of
being a local stack variable inside the setup function that returns
before the actual test functionality is executed.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Looks like the previous fix for a newer OpenSSL versions broke
functionality with older versions that did not seem to like @SECLEVEL=0
in the cipher list. Make that addition conditional on OpenSSL version to
work with both versions.
Fixes: e87e6f609b ("tests: Fix EAP-FAST protocol testing with newer OpenSSL and pyOpenSSL")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
wpas_ap_async_fail fails with this message.
---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
nfc_wps_handover_5ghz fails with this message.
---------------
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
---------------
This patch fixes the issue.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
dfs_cac_restart_on_enable fails with this message.
---------------
START dfs_cac_restart_on_enable 1/1
wlan0: Country code not reset back to 00: is FI
wlan0: Country code cleared back to 00
FAIL dfs_cac_restart_on_enable 3.037694 2019-05-28 01:35:07.548390
failed tests: dfs_cac_restart_on_enable
---------------
This patch fixes the false negative.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
This is a newer version of tests/wnm-fuzzer tool as the initial step in
creating a more uniform set of fuzzing tools that can be used with both
libFuzzer and afl-fuzz.
Signed-off-by: Jouni Malinen <j@w1.fi>
It looks like the previously used sleep time was not sufficient to allow
capturing the frames from wlan0/wlan1/wlan2 to start and complete so
that all the necessary frames can be checked. This was the case
especially with UML time-travel=inf-cpu.
Signed-off-by: Jouni Malinen <j@w1.fi>
Recent regdb enabled UNII 3 in Finland. Change the
mbo_supp_oper_classes_fi test accordingly to accept either the previous
or the current value to be reported.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
It is fine for the station to associate with either AP in this test
case, so do not force AP side connection check with apdev[0].
Signed-off-by: Jouni Malinen <j@w1.fi>
When the serial ports are set into raw mode on stdio (fd:0,fd:1)
then Ctrl-C is sort of passed through, but not effective. Request
non-raw mode to avoid that and let us cancel test execution with
Ctrl-C properly (both in parallel-vm.py and vm-run.sh cases).
Note that this requires a currently out-of-tree patch, but so
does the virtual time. If the patch is not applied, the command
line argument is ignored.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
time-travel=inf-cpu needs bit more wait before being able to fetch the
STATUS* items after initial connection request.
Signed-off-by: Jouni Malinen <j@w1.fi>
Waiting for exactly one second for a one second timeout with
time-travel=inf-cpu is not exactly robust, so increase that wait to be
able to see the last EAPOL-Key TX attempt from hostapd.
Signed-off-by: Jouni Malinen <j@w1.fi>
Busy loop for waiting is not going to work with time-travel=inf-cpu, so
need to something a bit more explicit to wait for the wpa_supplicant
process to proceed while not fully breaking the idea of this test case
to iteration through large number of STATUS-VERBOSE commands to hit
different states.
Signed-off-by: Jouni Malinen <j@w1.fi>
The sae_groups parameter needs to be cleared before attempt a SAE
connection in a test case to avoid issues with this parameter having
been left to something else than the default one by a previous test
case. This was found with the following sequence:
sae_pwe_failure dpp_auto_connect_legacy_psk_sae_1
Signed-off-by: Jouni Malinen <j@w1.fi>
The earlier change from using apdev[1] to using a no-interface
ifname=as-erp in the ERP related test cases ended up leaving the
separate authentication server interface running after the end of the
test case. This left UDP port 18128 open and any consecutive test case
needing this port failed to start another authentication server.
This can be reproduced with following test case sequence:
fils_auth_gtk_rekey authsrv_unknown_user
Fixes: e374def207 ("tests: Start ERP authentication server without AP")
Signed-off-by: Jouni Malinen <j@w1.fi>
This fuzzing wrapper does not go through full hostapd_clean_iface() call
to free memory, so call ap_list_deinit() to avoid reporting memory leaks
from added AP list entries. This case could not be hit with
hostapd/wpa_supplicant since they perform full interface deinit on
interface removal.
Credit to OSS-Fuzz: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=14928
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Couple of the callback functions had changed their prototypes and
p2p-fuzzer compilation resulted in a warning and not returning
*scheduled from the send_action() callback. This was reported as
use-of-uninitialized-value which was not really possible with
wpa_supplicant since the issue was only in the fuzzing wrapper.
Credit to OSS-Fuzz: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=14924
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Avoid a memory leak in fuzzer tests by calling wnm_deallocate_memory()
before exiting since this fuzzing wrapper does not use full
wpa_supplicant_cleanup().
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
There is no actual need for running the authentication server with
driver=nl80211, so simplify this by using driver=none instead. This
frees up apdev[1] for actual AP needs in the test cases.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
This speeds up test execution significantly by removing unnecessary
waiting for things to happen since the kernel log is allowed to jump
forward whenever there is nothing to do.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
This test case was failing frequently due to the station not being able
to connect back to the AP if the interrupted channel switch ended up
moving the AP to the new channel anyway on restart. Scan both possible
channels to allow the AP to be found in either case.
Signed-off-by: Jouni Malinen <j@w1.fi>
This allows UML builds to be used in running user mode without having to
run the full x86 kernel in virtual machine.
Signed-off-by: Jouni Malinen <j@w1.fi>
The change to use a shared dragonfly_generate_scalar() helper function
resulted in failures in sae_no_random and sae_bignum_failure test cases
due to renamed functions and removed uses.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
The change to use shared dragonfly_get_random_qr_qnr() and
dragonfly_get_rand_1_to_p_1() helper functions resulted in failures in
sae_no_random and sae_bignum_failure test cases due to renamed functions
and removed uses.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
These cases are for the IEEE 802.11 Status Code and Reason Code and
those fields are unsigned 16 bit values, so use the more appropriate
type consistently. This is mainly to document the uses and to make the
source code easier to understand.
Signed-off-by: Jouni Malinen <j@w1.fi>
