Commit graph

966 commits

Author SHA1 Message Date
Sathishkumar Muruganandam
c809756f9f nl80211: Allocate nl_sock for NETLINK_ROUTE when already_in_bridge
When we start hostapd having Hotspot 2.0 configuration with interface
already added to bridge interface, addition and deletion of new neighbor
to bridge ip neighbor table fails.

This is since 'bss->added_if_into_bridge' is not set which only allows
'drv->rtnl_sk' (nl_sock for NETLINK_ROUTE) allocation needed for bridge
ip neighbor table.

Add a new bit 'already_in_bridge' and set it when interface is already
added to bridge by some external component. Check this bit in addition
to 'bss->added_if_into_bridge' for 'drv->rtnl_sk' allocation done in
i802_init().

Now 'drv->rtnl_sk' is closed in wpa_driver_nl80211_deinit() regardless of
'bss->added_if_into_bridge' since when we have 'bss->already_in_bridge'
case too, this need to be removed.

brctl show

bridge name     bridge id               STP enabled     interfaces
br0             8000.8efdf006b050       no              ap

hostapd_cli raw STATUS-DRIVER

Selected interface 'ap'
ifindex=15
ifname=ap
brname=br0
addr=8e:fd:f0:06:b0:50
freq=5180
beacon_set=1
already_in_bridge=1
..

Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
2018-07-05 13:36:27 +03:00
Peter Oh
0928b62944 nl80211: Allow mesh interface to send channel switch request
Add mesh type to nl80211 channel switch request, so mesh is able to send
the request to kernel drivers.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2018-05-31 12:16:03 +03:00
Bhagavathi Perumal S
1952b626ba hostapd: Add ctrl iface indications for WDS STA interface
This allows user to get event indication when a new interface is
added/removed for 4addr WDS STA and also WDS STA ifname is informed
through the STA command.

Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
1baa130bd0 nl80211: Print NL80211_CMD_SET_POWER_SAVE errors in debug log
This makes it easier to understand what happened with PS configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Ahmad Masri
86c998d37a FT: Add FT auth algorithm to connect params when roaming
Add WPA FT auth to connect params in case of a re-connection to ESS
supporting FT when FT was used in the first connect.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
2018-04-20 00:35:41 +03:00
Ben Greear
f875da0448 nl80211: Add MLME auth work-around for -EEXIST errno
The Linux 4.9 kernel, at least, can return EEXIST when trying to auth a
station that already exists.

We have seen this bug in multiple places, but it is difficult to
reproduce. Here is a link to someone else that appears to have hit this
issue: https://github.com/greearb/ath10k-ct/issues/18

Signed-off-by: Ben Greear <greearb@candelatech.com>
2018-04-15 21:58:53 +03:00
Beniamino Galvani
77a020a118 wpa_supplicant: Fix auth failure when the MAC is updated externally
When connecting to a WPA-EAP network and the MAC address is changed
just before the association (for example by NetworkManager, which sets
a random MAC during scans), the authentication sometimes fails in the
following way ('####' logs added by me):

wpa_supplicant logs:
 wlan0: WPA: RX message 1 of 4-Way Handshake from 02:00:00:00:01:00 (ver=1)
 RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 d8 21 9d a5 73 98 88 26 ef 03 d2 ce f7 04 7d 23
 WPA: PMKID in EAPOL-Key - hexdump(len=22): dd 14 00 0f ac 04 d8 21 9d a5 73 98 88 26 ef 03 d2 ce f7 04 7d 23
 RSN: PMKID from Authenticator - hexdump(len=16): d8 21 9d a5 73 98 88 26 ef 03 d2 ce f7 04 7d 23
 wlan0: RSN: no matching PMKID found
 EAPOL: Successfully fetched key (len=32)
 WPA: PMK from EAPOL state machines - hexdump(len=32): [REMOVED]
 #### WPA: rsn_pmkid():
 #### WPA: aa              - hexdump(len=6): 02 00 00 00 01 00
 #### WPA: spa             - hexdump(len=6): 66 20 cf ab 8c dc
 #### WPA: PMK             - hexdump(len=32): b5 24 76 4f 6f 50 8c f6 a1 2e 24 b8 07 4e 9a 13 1b 94 c4 a8 1f 7e 22 d6 ed fc 7d 43 c7 77 b6 f7
 #### WPA: computed PMKID  - hexdump(len=16): ea 73 67 b1 8e 5f 18 43 58 24 e8 1c 47 23 87 71
 RSN: Replace PMKSA entry for the current AP and any PMKSA cache entry that was based on the old PMK
 nl80211: Delete PMKID for 02:00:00:00:01:00
 wlan0: RSN: PMKSA cache entry free_cb: 02:00:00:00:01:00 reason=1
 RSN: Added PMKSA cache entry for 02:00:00:00:01:00 network_ctx=0x5630bf85a270
 nl80211: Add PMKID for 02:00:00:00:01:00
 wlan0: RSN: PMKID mismatch - authentication server may have derived different MSK?!

hostapd logs:
 WPA: PMK from EAPOL state machine (MSK len=64 PMK len=32)
 WPA: 02:00:00:00:00:00 WPA_PTK entering state PTKSTART
 wlan1: STA 02:00:00:00:00:00 WPA: sending 1/4 msg of 4-Way Handshake
 #### WPA: rsn_pmkid():
 #### WPA: aa              - hexdump(len=6): 02 00 00 00 01 00
 #### WPA: spa             - hexdump(len=6): 02 00 00 00 00 00
 #### WPA: PMK             - hexdump(len=32): b5 24 76 4f 6f 50 8c f6 a1 2e 24 b8 07 4e 9a 13 1b 94 c4 a8 1f 7e 22 d6 ed fc 7d 43 c7 77 b6 f7
 #### WPA: computed PMKID  - hexdump(len=16): d8 21 9d a5 73 98 88 26 ef 03 d2 ce f7 04 7d 23
 WPA: Send EAPOL(version=1 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=22 keyidx=0 encr=0)

That's because wpa_supplicant computed the PMKID using the wrong (old)
MAC address used during the scan. wpa_supplicant updates own_addr when
the interface goes up, as the MAC can only change while the interface
is down. However, drivers don't report all interface state changes:
for example the nl80211 driver may ignore a down-up cycle if the down
message is processed later, when the interface is already up. In such
cases, wpa_supplicant (and in particular, the EAP state machine) would
continue to use the old MAC.

Add a new driver event that notifies of MAC address changes while the
interface is active.

Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
2018-03-30 12:16:42 +03:00
Bhagavathi Perumal S
72123a84cb hostapd: Add last_ack_rssi into ctrl iface cmd STA
This allows external application to get last ACK signal strength of the
last transmitted frame if the driver makes this information
(NL80211_STA_INFO_ACK_SIGNAL) available.

Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2018-03-19 19:23:26 +02:00
Emmanuel Grumbach
299d21e8e2 nl80211: Use the new NL80211_MFP_OPTIONAL option
Now we can configure the network block so that it allows MFP setting for
the NL80211_CMD_CONNECT command. If the kernel finds an AP that requires
MFP, it'll be able to connect to it.

Note that since NL80211_MFP_OPTIONAL isn't supported for
NL80211_CMD_ASSOCIATE, we need to take the MFP configuration outside
nl80211_connect_common(). In addition, check that
NL80211_EXT_FEATURE_MFP_OPTIONAL is supported, to be backward compatible
with older kernels.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2018-02-17 18:50:28 +02:00
Avraham Stern
05fc7c68f6 nl80211: Add API to set the PMK to the driver
Add support for setting the PMK to the driver. This is used for
drivers that support 4-way handshake offload.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2018-02-17 18:36:16 +02:00
Eliad Peller
730c5a1d09 nl80211: Support passing PSK on connect
If the driver advertises WPA_DRIVER_FLAGS_4WAY_HANDSHAKE support, pass
the PSK on connect.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2018-02-17 18:31:05 +02:00
Jouni Malinen
0887215d94 nl80211: Do not try to add too large NL80211_ATTR_PMK for set/del PMKSA
The current cfg80211 limit for the maximum NL80211_ATTR_PMK length is
48, so anything larger than that will result in the operation completely
failing. Since the PMKSA entries can be used without the PMK for most
purposes (the main use case for PMK currently is offloaded FILS
authentication), try to go ahead by configuring only the PMKID for the
case where 64-octet PMK is needed (which is currently limited to only
DPP with NIST P-521 and brainpoolP512r1 curves). This can fix DPP
connections with drivers that expect to get the PMKID through this
interface while still leaving the actual 4-way handshake for user space.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-10 12:16:53 +02:00
Jouni Malinen
e7f6e6ee1b nl80211: Print NL80211_CMD_{SET,DEL}_PMKSA failures in debug log
This makes it easier to notice if the driver operation to manage PMKSA
cache information fails unexpectedly.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-10 12:10:07 +02:00
Sunil Dutt
40a68f3384 nl80211: Create a netlink socket handle for the Connect interface
This netlink socket handle owns the connect request and is further used
by the host driver/kernel to request for the external authentication.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-02 19:02:44 +02:00
Sunil Dutt
ba71cb821a nl80211: Introduce the interface for external authentication
This command/event interface can be used by host drivers that do not
define separate commands for authentication and association but rely on
wpa_supplicant for the authentication (SAE) processing.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-02 18:51:04 +02:00
Srinivas Dasari
e005725a69 nl80211: Add DPP and OWE AKM selectors to CONNECT/ASSOC request
This is needed to support drivers that use NL80211_ATTR_AKM_SUITES.

Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org>
2018-01-31 11:21:10 +02:00
vamsi krishna
d98038bb05 FILS: Driver configuration to disable/enable FILS features
The new disable_fils parameter can be used to disable FILS functionality
in the driver. This is currently removing the FILS Capability bit in
Extended Capabilities and providing a callback to the driver wrappers.
driver_nl80211.c implements this using a QCA vendor specific command for
now.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-15 20:52:17 +02:00
Jouni Malinen
963d3149ab nl80211: Fix NL80211_MESHCONF_AUTO_OPEN_PLINKS encoding
This nl80211 attribute uses NLA_U8 policy in cfg80211 and wpa_supplicant
needs to use same size when writing the attribute.

This fixes mesh mode regression triggered by kernel commit "net:
netlink: Update attr validation to require exact length for some types"
in v4.15-rc1 that resulted in the following debug log entry when trying
to join a mesh:
nl80211: mesh join failed: ret=-22 (Invalid argument)

Fixes: 6c1664f605 ("nl80211: Add new commands to support mesh interfaces")
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-01 22:21:24 +02:00
Jouni Malinen
a2426829ce nl80211: Fix NL80211_ATTR_SMPS_MODE encoding
This nl80211 attribute uses NLA_U8 policy in cfg80211 and
hostapd/wpa_supplicant needs to use same size when writing the
attribute.

This fixes AP mode regression triggered by kernel commit "net: netlink:
Update attr validation to require exact length for some types" in
v4.15-rc1 that resulted in the following debug log entry when trying to
enable beaconing:
nl80211: Beacon set failed: -34 (Numerical result out of range)

Fixes: da1080d721 ("nl80211: Advertise and configure SMPS modes")
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-01 20:22:44 +02:00
Vidyullatha Kanchanapally
3c67e977de nl80211: Add support to send updated connection parameters
After an initial connection certain connection parameters may be
updated. It may be necessary to send these parameters to drivers since
these will be used in driver-initiated roaming cases. This commit
defines the driver_ops call for this and implements the needed
functionality for the nl80211 driver interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-17 16:04:51 +03:00
bhagavathi perumal s
3567641ebb Add TX/RX rate info and signal strength into STA output
These allow external programs to fetch the TX and RX rate information
and signal strength for a specific STA through the hostapd control
interface command "STA <addr>". The values of these attributes are
filled in the response of nl80211 command NL80211_CMD_GET_STATION.

Signed-off-by: bhagavathi perumal s <bperumal@qti.qualcomm.com>
2017-10-05 12:12:24 +03:00
Rohit Pratap Singh
fdbfb63e45 nl80211: Fix bridge name print while removing interface from bridge
Removing interface from bridge in_br
linux_br_del_if(drv->global->ioctl_sock, in_br, ifname)
but in case of failure, the error print is incorrect:
it should show error for "in_br" instead of the wrong bridge name
"brname".

Signed-off-by: Rohit Pratap Singh <rohit.s@samsung.com>
Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
2017-09-10 22:11:08 +03:00
Jouni Malinen
64a0a75b5b nl80211: Fix auth_alg selection with FILS in the connect command
NL80211_ATTR_AUTH_TYPE needs to be skipped if multiple auth_alg options
are included. The previous list missed the new FILS auth_alg here and
ended up not doing so if OPEN and FILS were included.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-08-24 23:30:20 +03:00
Ashwini Patil
b04854ceff nl80211/MBO: Set temporary disallowed BSSID list to driver
Set temporary disallowed BSSID list to the driver so that the driver
doesn't try to connect to any of the blacklisted BSSIDs during
driver-based roaming operation. This commit includes support only for
the nl80211 driver interface using a QCA vendor command for this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-30 17:27:44 +03:00
Vidyullatha Kanchanapally
b6ea764252 nl80211: Make KCK attribute optional in rekey data
New AKM suites like FILS-SHA256 do not use KCK and hence KCK length can
be zero. Add changes to include KCK attribute in rekey data only if the
length is non-zero.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-23 18:58:24 +03:00
Jouni Malinen
00b02149ed nl80211: Register to receive DPP Public Action frames
These are needed for DPP exchanges. In addition, register GAS frames for
DPP builds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-17 18:04:54 +03:00
Jouni Malinen
5e0c20ff3e nl80211: Do not notify interface as re-enabled if initialization fails
wpa_supplicant tries to reinitialize an interface when a previously
removed netdev is restored (e.g., re-insert a USB dongle). If that
initialization fails (e.g., driver ejects ifconfig UP), the previous
implementation resulted in leaving the interface in incomplete state
while still claiming to upper layers that the interface status has
changed back to functional one.

Fix this by skipping the interface status update if reinitialization
fails. In other words, remain in INTERFACE_DISABLED state if the
interface cannot be re-enabled successfully.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-06 03:07:43 +03:00
Beniamino Galvani
290834df69 nl80211: Fix race condition in detecting MAC change
Commit 3e0272ca00 ('nl80211: Re-read MAC
address on RTM_NEWLINK') added the detection of external changes to MAC
address when the interface is brought up.

If the interface state is changed quickly enough, wpa_supplicant may
receive the netlink message for the !IFF_UP event when the interface
has already been brought up and would ignore the next netlink IFF_UP
message, missing the MAC change.

Fix this by also reloading the MAC address when a !IFF_UP event is
received with the interface up, because this implies that the
interface went down and up again, possibly changing the address.

Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
2017-05-13 20:01:44 +03:00
Masashi Honma
31a856a127 mesh: Make NL80211_MESHCONF_RSSI_THRESHOLD configurable
In some practical cases, it is useful to suppress joining to node in the
distance. The new field mesh_rssi_threshold could be used as RSSI
threshold for joining.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-05-08 16:23:02 +03:00
Vamsi Krishna
178553b709 MBO: Add support to set ignore assoc disallow to driver
Add support to set ignore assoc disallow to the driver so that the
driver ignores assoc disallowed bit set by APs while connecting. This is
used by drivers that handle BSS selection and roaming internally.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-05-05 00:26:05 +03:00
Vidyullatha Kanchanapally
061a3d3d53 nl80211: Add support for FILS Cache Identifier in add/remove_pmkid()
This is needed for configuring PMKSA cache entries to the driver with
the FILS Cache Identifier and SSID.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-07 17:03:37 +03:00
Vidyullatha Kanchanapally
6fbb54140b driver: Move add_pmkid() and remove_pmkid() arguments into a struct
This makes it easier to add more arguments to these wpa_driver_ops
functions.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-07 17:03:35 +03:00
Vidyullatha Kanchanapally
ad295f3b85 nl80211: Add support for FILS shared key offload
Add support for FILS shared key offload for drivers which advertize
FILS shared key support using NL80211_CMD_CONNECT.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-07 16:21:55 +03:00
Jouni Malinen
cad291d671 FILS: Define authentication algorithm for FILS SK auth with PFS
This is needed to add PFS support into hostapd and wpa_supplicant FILS
shared key authentication.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 22:39:38 +02:00
Kanchanapally, Vidyullatha
3ab484928a nl80211: Driver command for checking BTM accept/reject
Add driver interface command using the QCA vendor extensions to check
the driverr whether to accept or reject a BSS transition candidate. For
the reject case, report an MBO reject reason code.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-07 00:20:29 +02:00
Vamsi Krishna
8331c9b316 nl80211: Add support for mgmt_tx with random TA
This adds support for specifying a random TA for management frame
transmission commands and driver capability flags for indicating whether
this is supported in not-connected and connected states.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-07 19:35:34 +02:00
Dedy Lansky
89fa633afb nl80211: Fix error while enabling AP mode with driver-SME
Following commit a70cd0db87 ('Don't
register for Beacon frames for IEEE 802.11ad AP'),
nl80211_get_wiphy_data_ap() is unconditionally called when starting AP.
This function tries to register for Beacon frames RX which fails for
some driver which don't support such registration and do not need it in
case the driver implements AP mode SME functionality.

Fix this by conditionally calling nl80211_get_wiphy_data_ap() like prior
to commit a70cd0db87.

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
2017-02-05 20:48:23 +02:00
Masashi Honma
7813b7c34d nl80211: Fix a memory leak on deinit with HT enabled mesh
Commit a70cd0db87 ('nl80211: Don't
register for Beacon frames for IEEE 802.11ad AP') could cause a trailing
memory leak on IEEE 802.11n enabled mesh. This commit fixes the issue.

-----------------
ELOOP: remaining socket: sock=12 eloop_data=0xba8260 user_data=0xbb3d90 handler=0x4aeb90
WPA_TRACE: eloop unregistered socket handler: 0x4aeb90
     nl80211_recv_beacons() ../src/drivers/driver_nl80211.c:625
WPA_TRACE: eloop sock - START
[0]: ./hostap/wpa_supplicant/wpa_supplicant() [0x431f2a]
     eloop_sock_table_add_sock() ../src/utils/eloop.c:360
[1]: ./hostap/wpa_supplicant/wpa_supplicant() [0x4b0e49]
     nl80211_register_eloop_read() ../src/drivers/driver_nl80211.c:153
[2]: ./hostap/wpa_supplicant/wpa_supplicant() [0x4bacf0]
     dl_list_add() src/utils/list.h:30
     nl80211_get_wiphy_data_ap() ../src/drivers/driver_nl80211.c:728
     wpa_driver_nl80211_set_ap() ../src/drivers/driver_nl80211.c:3786
[3]: ./hostap/wpa_supplicant/wpa_supplicant(ieee802_11_set_beacon+0x150) [0x469700]
     ieee802_11_set_beacon() ../src/ap/beacon.c:1349
[4]: ./hostap/wpa_supplicant/wpa_supplicant(ieee802_11_set_beacons+0x45) [0x469805]
     ieee802_11_set_beacons() ../src/ap/beacon.c:1368
[5]: ./hostap/wpa_supplicant/wpa_supplicant() [0x437559]
     mesh_mpm_add_peer() mesh_mpm.c:688
[6]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_mesh_new_mesh_peer+0x42) [0x439182]
     wpa_mesh_new_mesh_peer() mesh_mpm.c:737
[7]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_mesh_notify_peer+0x80) [0x436460]
     wpa_mesh_notify_peer() mesh.c:347
[8]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_supplicant_event+0xc7a) [0x4a69ba]
     wpa_supplicant_event() events.c:4312
[9]: ./hostap/wpa_supplicant/wpa_supplicant(process_global_event+0xaf0) [0x4c2d40]
     nl80211_new_peer_candidate() ../src/drivers/driver_nl80211_event.c:1247
     do_process_drv_event() ../src/drivers/driver_nl80211_event.c:2322
     process_global_event() ../src/drivers/driver_nl80211_event.c:2360
[10]: /lib/x86_64-linux-gnu/libnl-3.so.200(nl_recvmsgs_report+0x3dc) [0x7f937176873c]
[11]: /lib/x86_64-linux-gnu/libnl-3.so.200(nl_recvmsgs+0x9) [0x7f9371768ba9]
[12]: ./hostap/wpa_supplicant/wpa_supplicant() [0x4aeb58]
     wpa_driver_nl80211_event_receive() ../src/drivers/driver_nl80211.c:1457
[13]: ./hostap/wpa_supplicant/wpa_supplicant() [0x43242e]
     eloop_sock_table_dispatch() ../src/utils/eloop.c:598
[14]: ./hostap/wpa_supplicant/wpa_supplicant(eloop_run+0x22e) [0x432e0e]
     eloop_sock_table_dispatch() ../src/utils/eloop.c:589
     eloop_run() ../src/utils/eloop.c:1219
[15]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_supplicant_run+0x77) [0x49e327]
     wpa_supplicant_run() wpa_supplicant.c:5608
WPA_TRACE: eloop sock - END
MEMLEAK[0xba81b0]: len 72
WPA_TRACE: memleak - START
[0]: ./hostap/wpa_supplicant/wpa_supplicant(os_malloc+0x57) [0x430d67]
     os_malloc() ../src/utils/os_unix.c:690
[1]: ./hostap/wpa_supplicant/wpa_supplicant(os_zalloc+0xe) [0x430fce]
     os_zalloc() ../src/utils/os_unix.c:749
[2]: ./hostap/wpa_supplicant/wpa_supplicant() [0x4babaa]
     nl80211_get_wiphy_data_ap() ../src/drivers/driver_nl80211.c:692
     wpa_driver_nl80211_set_ap() ../src/drivers/driver_nl80211.c:3786
[3]: ./hostap/wpa_supplicant/wpa_supplicant(ieee802_11_set_beacon+0x150) [0x469700]
     ieee802_11_set_beacon() ../src/ap/beacon.c:1349
[4]: ./hostap/wpa_supplicant/wpa_supplicant(ieee802_11_set_beacons+0x45) [0x469805]
     ieee802_11_set_beacons() ../src/ap/beacon.c:1368
[5]: ./hostap/wpa_supplicant/wpa_supplicant() [0x437559]
     mesh_mpm_add_peer() mesh_mpm.c:688
[6]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_mesh_new_mesh_peer+0x42) [0x439182]
     wpa_mesh_new_mesh_peer() mesh_mpm.c:737
[7]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_mesh_notify_peer+0x80) [0x436460]
     wpa_mesh_notify_peer() mesh.c:347
[8]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_supplicant_event+0xc7a) [0x4a69ba]
     wpa_supplicant_event() events.c:4312
[9]: ./hostap/wpa_supplicant/wpa_supplicant(process_global_event+0xaf0) [0x4c2d40]
     nl80211_new_peer_candidate() ../src/drivers/driver_nl80211_event.c:1247
     do_process_drv_event() ../src/drivers/driver_nl80211_event.c:2322
     process_global_event() ../src/drivers/driver_nl80211_event.c:2360
[10]: /lib/x86_64-linux-gnu/libnl-3.so.200(nl_recvmsgs_report+0x3dc) [0x7f937176873c]
[11]: /lib/x86_64-linux-gnu/libnl-3.so.200(nl_recvmsgs+0x9) [0x7f9371768ba9]
[12]: ./hostap/wpa_supplicant/wpa_supplicant() [0x4aeb58]
     wpa_driver_nl80211_event_receive() ../src/drivers/driver_nl80211.c:1457
[13]: ./hostap/wpa_supplicant/wpa_supplicant() [0x43242e]
     eloop_sock_table_dispatch() ../src/utils/eloop.c:598
[14]: ./hostap/wpa_supplicant/wpa_supplicant(eloop_run+0x22e) [0x432e0e]
     eloop_sock_table_dispatch() ../src/utils/eloop.c:589
     eloop_run() ../src/utils/eloop.c:1219
[15]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_supplicant_run+0x77) [0x49e327]
     wpa_supplicant_run() wpa_supplicant.c:5608
WPA_TRACE: memleak - END
MEMLEAK: total 72 bytes
-----------------

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-01-29 17:55:10 +02:00
Jouni Malinen
a042e39acf nl80211: Use RSN_CIPHER_SUITE_* instead of WLAN_CIPHER_SUITE_*
This is a step towards getting rid of the unnecessary duplication of
definitions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 14:04:44 +02:00
Jouni Malinen
3aa24db953 nl80211: Use RSN_AUTH_KEY_MGMT_* instead of WLAN_AKM_SUITE_*
This is a step towards getting rid of the unnecessary duplication of
definitions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 12:27:48 +02:00
Dedy Lansky
a70cd0db87 nl80211: Don't register for Beacon frames for IEEE 802.11ad AP
Beacon frames are not supported in IEEE 802.11ad network (DMG-beacons
used instead). To allow hostapd to manage IEEE 802.11ad AP with
device_ap_sme disabled, skip nl80211_register_beacons() for IEEE
802.11ad AP.

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
2017-01-13 15:58:01 +02:00
Jouni Malinen
c85dfc6f84 nl80211: Set NL80211_ATTR_IFACE_SOCKET_OWNER for connect and associate
This allows kernel to force disconnection if something kills the
wpa_supplicant process in a manner that does not allow proper cleanup to
be performed. The association is not supposed to be allowed to continue
after process has ended since there are number of operations that
wpa_supplicant may need to do during the association.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-13 15:05:26 +02:00
Jouni Malinen
b2442f2568 nl80211: Debug prints for TDLS_OPER command and result
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-08 17:12:24 +02:00
Jouni Malinen
e4ec6bbfd8 nl80211: Register for Link Measurement Report frames in AP mode
This is needed to be able to get the response to a link measurement
request.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-07 18:46:10 +02:00
Dedy Lansky
05e5e615e6 AP: Skip authentication/deauthentication phase for DMG/IEEE 802.11ad
Authentication and Deauthentication frames are not used in DMG/IEEE
802.11ad networks. For DMG/IEEE 802.11ad the following was implemented:
Upon receiving association request, allocate the sta object and
initialize it as if authentication took place. Upon receiving
disassociation, deallocate the sta object.
ap_sta_disassociate/ap_sta_deauthenticate/ap_sta_disconnect all use
disassociation instead of deauthentication. In driver_nl80211,
i802_sta_deauth() is routed to i802_sta_disassoc().

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
2017-01-05 17:28:23 +02:00
Ningyuan Wang
ed0a4ddc22 nl80211: Update drv->ssid on connect/associate event based on BSS data
On a connect nl80211 event, wpa_supplicant uses
wpa_driver_nl80211_get_ssid() to fetch the current associated SSID to
compare to existing configurations. However,
wpa_driver_nl80211_get_ssid() uses drv->ssid, which is a cached value.
It is set when we explicitly initial a connect request using
wpa_supplicant. If the association was initiated outside of
wpa_supplicant, we need another way to populate drv->ssid. This commit
sets drv->ssid based on cfg80211 BSS information on connect/associate
nl80211 events.

Signed-off-by: Ningyuan Wang <nywang@google.com>
2016-12-05 12:08:46 +02:00
Michael Braun
34f7c699a6 Add multicast to unicast support
This adds support for nl80211 NL80211_CMD_SET_MULTICAST_TO_UNICAST
command.

By setting the new hostapd configuration option multicast_to_unicast=1,
hostapd configures this AP to perform multicast to unicast conversion.

When enabled, all multicast packets with ethertype ARP, IPv4, or IPv6
(possibly within an 802.1Q header) will be sent out to each station once
with the destination (multicast) MAC address replaced by the station's
MAC address. Note that this may break certain expectations of the
receiver, e.g., the ability to drop unicast IP packets encapsulated in
multicast L2 frames, or the ability to not send destination unreachable
messages in such cases.

This also does not implement Directed Multicast Service (DMS).

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-12-04 21:00:06 +02:00
Jouni Malinen
a1fce3911f nl80211: Optimize memory use in nl80211_get_assoc_freq()
Do not use the generic bss_info_handler() design to fetch all scan
results into temporary memory buffer. Instead, use a separate BSS info
handler that fetches the requested information without fully parsing the
BSS entries and without allocating any memory for collecting all the
results.

This is also simplifying bss_info_handler() and nl80211_parse_bss_info()
design by getting rid of the special case that was used only for
nl80211_get_assoc_freq() and not normal scan result fetching.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-03 22:37:41 +02:00
Purushottam Kushwaha
d4f3003c56 nl80211: Configure Beacon frame TX rate if driver advertises support
If the driver advertises support for setting Beacon frame data rate,
allow the user to configure this rate as part of starting the AP. Only
one Beacon frame TX rate is allowed.

Drivers advertising such support should set corresponding flag via the
NL80211_ATTR_EXT_FEATURES attribute.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-26 00:36:27 +02:00
Joel Cunningham
7824bf77d6 nl80211: Fix get_inact_sec() returning -1 on failure
This commit fixes the nl80211 driver call get_inact_sec() to return -1
when STA inactivity time retrieval fails in i802_read_sta_data().

This was intended to be handled by initalizing the inactive_msec member
to -1 but i802_read_sta_data() assumes the data parameter is
uninitialized and memsets the entire structure, neutralizing the attempt
to distinguish between no value (-1) and a time value of 0.

This is fixed by now requiring i802_read_sta_data() callers to
initialize the data structure first (allowing get_inact_sec() to use
-1). This is a safe change because it does not change any driver API
behavior and only affects one other static function in driver_nl80211.c

Signed-off-by: Joel Cunningham <joel.cunningham@me.com>
2016-11-19 17:39:23 +02:00
Sunil Dutt
2e4e4fb71c nl80211: Allow TDLS trigger modes to be configured to the host driver
This commit adds a control interface command to configure the TDLS
trigger mode to the host driver. This TDLS mode is configured through
the "SET tdls_trigger_control" control interface command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 23:22:33 +03:00
Jouni Malinen
40a4572738 nl80211: FILS KEK and nonces for NL80211_CMD_ASSOCIATE
This sends the FILS KEK and AAD context (nonces) to the driver with the
NL80211_CMD_ASSOCIATE messages when using FILS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 15:02:08 +03:00
Jouni Malinen
d8f9342d03 nl80211: Add support for setting FILS authentication algorithm
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 15:02:08 +03:00
Jouni Malinen
ce16c489d8 Rename sae_data to more generic auth_data
This makes it cleaner for the FILS implementation to use the same design
for setting Authentication frame elements as was already done with SAE.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 17:51:43 +03:00
Jouni Malinen
ef24ad3ec5 nl80211: Remove unnecessary duplication from nl80211_set_param()
There is no need to find bss->drv separately for each parameter, so do
this once at the beginning of the function.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-23 17:36:55 +03:00
Mikael Kanstrup
4d584d8c2b nl80211: Add driver parameter force_bss_selection
Add driver parameter command to force capability flag
WPA_DRIVER_FLAGS_BSS_SELECTION even if driver states otherwise. This is
mainly for testing purposes.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-09-23 17:36:55 +03:00
Rafał Miłecki
ea19b39f60 Revert "nl80211: Remove duplicated check in nl80211_setup_ap()"
This reverts commit 647862eb60.

The second check of device_ap_sme looks like duplicated, but it isn't
actually. The trick is nl80211_create_monitor_interface may change that
variable value and the second evaluation may give a different result.

This definitely isn't a very clear code, but that change caused a
regression for drivers that:
1) Don't report NL80211_ATTR_DEVICE_AP_SME
2) Don't support monitor mode
3) Don't support subscribing for PROBE_REQ and/or ACTION frames
like brcmfmac. With such drivers hostapd doesn't start anymore.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-17 20:08:24 +03:00
Masashi Honma
052b8d38c5 mesh: Report HT operation mode to kernel
Report HT operation mode to kernel to broadcast correct IE in beacon
(for example HT operation IE).

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-08-18 20:46:15 +03:00
Masashi Honma
2bd6217173 mesh: Use WPA_DRIVER_MESH_CONF_FLAG_* as modification flag
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-08-18 20:40:13 +03:00
Masashi Honma
4ffb3f870d mesh: Do NL80211_MESHCONF_* setting in single function
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-08-18 20:37:38 +03:00
Masashi Honma
a1431ef8df mesh: Move max_peer_links parameter to appropriate struct
Accoding to the comment of struct wpa_driver_mesh_bss_params, the
max_peer_links parameter should be under that struct.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-08-18 20:33:39 +03:00
Eduardo Abinader
647862eb60 nl80211: Remove duplicated check in nl80211_setup_ap()
Just removing a duplicated condition.

Signed-off-by: Eduardo Abinader <eduardoabinader@gmail.com>
2016-08-17 13:42:11 +03:00
Johannes Berg
e3429c0b15 nl80211: Fix control port protocol no-encrypt setting
Previously, driver_nl80211 sets NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT in
AP mode, to get EAPOL frames out unencrypted when using IEEE 802.1X/WEP.
However, due to the way nl80211/cfg80211 is implemented, this attribute
is ignored by the kernel if NL80211_ATTR_CONTROL_PORT_ETHERTYPE isn't
specified as well. Fix this by including
NL80211_ATTR_CONTROL_PORT_ETHERTYPE set to ETH_P_PAE. This can be done
unconditionally, since the kernel will allow ETH_P_PAE to be set even
when the driver didn't advertise support for arbitrary ethertypes.

Additionally, the params->pairwise_ciphers appear to not be set at
this point, so relax the check and allow them to be zero.

In client mode, this whole thing was missing, so add it. Again, the
pairwise suite can be WPA_CIPHER_NONE, so allow that case as well.

This fixed IEEE 802.1X/WEP EAP reauthentication and rekeying to use
unencrypted EAPOL frames which is the de facto way of implementing this
in wireless networks.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-17 13:40:40 +03:00
Felix Fietkau
4fe726e2d7 nl80211: Do not switch interface to station mode when using mesh
This fixes issues with adding mesh interfaces to a bridge.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-13 10:44:11 +03:00
vamsi krishna
cc9985d1b1 Set default scan IEs to the driver (QCA vendor extension)
This makes wpa_supplicant set default scan IEs to the driver (if the
vendor command is supported). The driver can use these IEs in the scan
requests initiated by the driver itself. Also the driver can merge these
IEs into further scan requests that it receives, in case if the scan
request doesn't carry any of the IEs sent in this command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-02 21:21:52 +03:00
Chaitanya T K
f5728d0a82 nl80211: Fix segfault when params->freq is NULL for AP mode start
If params->freq is NULL here, it leads to a segfault. Do not initialize
bss->bandwidth if params->freq is NULL.

Signed-off-by: Chaitanya T K <Chaitanya.Mgit@gmail.com>
2016-07-23 22:06:10 +03:00
Masashi Honma
3388e7b96f mesh: Remove HT IEs if HT is disabled
Previously, HT capability IE and HT information IE were included in
Beacon and Mesh Peering Open/Confirm frames even if HT is disabled with
disable_ht=1. This patch removes these.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-07-23 22:04:16 +03:00
Masashi Honma
4ac2ea5738 mesh: Make DTIM period configurable
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-07-23 21:58:04 +03:00
Masashi Honma
e347cafe57 mesh: Report mesh peer AID to kernel
Previously, mesh power management functionality works only with kernel
MPM. Because user space MPM did not report mesh peer AID to kernel,
the kernel could not identify the bit in TIM element. So this patch
reports mesh peer AID to kernel.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-07-23 20:26:26 +03:00
Peng Xu
a6f5b1937a P2P: Allow P2P listen being offloaded to the driver/firmware
This allows P2P Listen to be offloaded to device to enhance power
saving.

To start P2P listen offload, from wpa_cli interface, issue the command:
	p2p_lo_start <freq> <period> <interval> <count>

To stop P2P listen offload, issue the command:
	p2p_lo_stop

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-07-03 22:36:58 +03:00
Dmitry Shmidt
9607a1aef7 nl80211: Keep QCA vendor extensions together
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2016-06-30 00:25:31 +03:00
Jouni Malinen
d02e549831 mesh: Rename MPM FSM states to match the standard
During the P802.11s draft development, there were separate LISTEN and
IDLE states. However, the current IEEE 802.11 standards uses only the
IDLE state while the implementation called this LISTEN. Rename the state
in the implementation to match the one used in the standard to avoid
confusion. In addition, rename OPEN_{SENT,RCVD} to OPN_{SNT,RCVD} to
match the exact spelling of these states in the standard.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-28 22:53:05 +03:00
Jouni Malinen
4775471816 nl80211: Mark wpa_driver_nl80211_get_macaddr() static
This function is not used outside this file.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-24 19:02:58 +03:00
Masashi Honma
7a69fad7ad mesh: Sync max peer links with kernel
Set max peer links to kernel even when wpa_supplicant MPM is used. This
sets the correct value for the "Accepting Additional Mesh Peerings bit"
in "Mesh Capability field" in "Mesh Configuration element" in the Beacon
frame.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-06-12 21:49:05 +03:00
Jouni Malinen
a5a187b0f4 nl80211: Add TEST_FAIL() to command generation and set_mode
This makes it easier to test error paths for failing driver command
cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:13:32 +03:00
Jouni Malinen
92a515b869 nl80211: Update drv->assoc_freq on mesh join
This is needed to provide the correct frequency in SIGNAL_POLL command.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 21:30:18 +03:00
Kanchanapally, Vidyullatha
cc9a2575ca nl80211: Use extended capabilities per interface type
This adds the necessary changes to support extraction and use of the
extended capabilities specified per interface type (a recent
cfg80211/nl80211 extension). If that information is available,
per-interface values will be used to override the global per-radio
value.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-31 21:35:54 +03:00
Jouni Malinen
9ce3e61091 nl80211: Add TEST_FAIL() to nl80211_set_mac_addr()
This makes it easier to test some error paths in wpa_supplicant.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-22 18:08:55 +03:00
Kanchanapally, Vidyullatha
4d916ed6c5 nl80211: Register for only for specific Action frames in AP mode
This makes changes such that hostapd (and wpa_supplicant AP mode)
registers to kernel for specific Action frames instead of generically
registering for all Action frames. This makes it easier for other
programs to register for some Action frames that hostapd does not handle
today without having to somehow coordinate directly with hostapd.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-21 00:07:42 +03:00
Rafał Miłecki
f4830bed66 nl80211: Try running without mgmt frame subscription (driver AP SME)
One of supported code paths already allows this scenario. It is used if
driver doesn't report NL80211_ATTR_DEVICE_AP_SME and doesn't support
monitor interface. In such situation:
1) We don't quit if subscribing for WLAN_FC_STYPE_PROBE_REQ fails
2) We don't try subscribing for WLAN_FC_STYPE_ACTION
3) We fallback to AP SME mode after failing to create monitor interface
4) We don't quit if subscribing for WLAN_FC_STYPE_PROBE_REQ fails
Above scenario is used, e.g., with brcmfmac. As you can see - thanks to
events provided by cfg80211 - it's not really required to receive Probe
Request or action frames.

However, the previous implementation did not allow using hostapd with
drivers that:
1) Report NL80211_ATTR_DEVICE_AP_SME
2) Don't support subscribing for PROBE_REQ and/or ACTION frames
In case of using such a driver hostapd will cancel setup after failing
to subscribe for WLAN_FC_STYPE_ACTION. I noticed it after setting flag
WIPHY_FLAG_HAVE_AP_SME in brcmfmac driver for my experiments.

This patch allows working with such drivers with just a small warning
printed as debug message.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-04-28 20:47:12 +03:00
Jouni Malinen
bd86ea0808 nl80211: Get rid of unused assignment warning
The os_snprintf() call here cannot really fail in practice, but since
its result was stored into the local variable and not checked, static
analyzers could warn about the unused assignment. Clean this up by
checking the return value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-17 18:43:30 +03:00
Beni Lev
b5d172e578 nl80211: Add support for global RRM flag
Set the global RRM flag if global RRM is supported by the device. Also,
allow RRM in (Re)Association Request frame if the global RRM flag is
set.

Signed-off-by: Beni Lev <beni.lev@intel.com>
2016-04-17 12:41:44 +03:00
David Spinadel
864b95225c nl80211: Register to receive Radio Measurement Request frames
Register to receive Radio Measurement Request frames since LCI request
is supported by wpa_supplicant.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
2016-04-17 12:32:14 +03:00
Ilan Peer
6922d440de nl80211: Implement configure_data_frame_filters() callback
Implement configure_data_frame_filters() callback by using
the net-sysfs interfaces (if these are available).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2016-04-08 15:21:18 +03:00
Ayala Beker
ae33239c55 AP: Pass station P2P PS capabilities info during station add/set
If a legacy client with no P2P PS support is trying to connect to
a P2P GO, the driver should know that, and change its PS behavior
accordingly.

Add a parameter to hostapd_sta_add_params() indicating if P2P PS is
supported by the station and pass this parameter to kernel with nl80211
driver when the station is added/set.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
2016-04-08 13:02:49 +03:00
Jouni Malinen
1126c0787d nl80211: Ignore deauth/disassoc event during Connect reassociation
cfg80211 reports a deauth/disassoc event when internally clearing
connection with the previous BSS. Ignore that event to allow the new
connect command to complete.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-24 22:35:10 +02:00
Jouni Malinen
00c3c4ac9b nl80211: Add NL80211_ATTR_PREV_BSSID with Connect command
This makes it easier for drivers that use the Connect command instead of
separate Auth+Assoc commands to determine when to use reassociation
instead of association. Matching changes are still needed in cfg80211 to
allow this parameter to be used, but it is safe for wpa_supplicant to
start including this attribute now since it will be ignored by older
cfg80211 versions.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-24 22:35:10 +02:00
Roy Marples
45e3fc72c6 Find correct driver for interface additions/removals
Interface additions/removals are not guaranteed to be for the driver
listening to the kernel events. As such, send the events to
wpa_supplicant_event_global() which can then pick the correct interface
registered with wpa_supplicant to send the event to.

Signed-off-by: Roy Marples <roy@marples.name>
2016-03-22 17:41:37 +02:00
Jouni Malinen
29eddc3d8c nl80211: Fix error path in if_indices_reason reallocation
Commit 732b1d20ec ('nl80211: Clean up
ifidx properly if interface in a bridge is removed') added
drv->if_indices_reason array similarly to the previously used
drv->if_indices. However, it had a copy-paste error here on the error
path where a reallocation failure after at least one successful
reallocation would result in the drv->if_indices being overridden
instead of restoring drv->if_indices_reason to the old value. Fix this
by setting the correct variable on the error path. (CID 138514)

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-18 16:25:35 +02:00
Jouni Malinen
ee298f1b1f nl80211: Do not add NL80211_ATTR_SMPS_MODE attribute if HT is disabled
SMPS mode is applicable only for HT and including an attribute to
configure it when HT is disabled could result in the AP start operation
failing. Fix this by adding the attribute only in cases where HT is
enabled.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-18 16:16:40 +02:00
Dedy Lansky
f2d6c17aa0 nl80211: Support network hierarchy of a master interface under bridge
Since commit cb05808c46 ('nl80211: Generic
Linux master interface support for hostapd'), hostapd is listening for
EAPOL frames on any master which the interface is enslaved under.

This commit allows hostapd to support network hierarchy in which the
interface is enslaved under some master which in turn is enslaved under
a bridge.

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
2016-03-09 21:03:41 +02:00
Michael Braun
732b1d20ec nl80211: Clean up ifidx properly if interface in a bridge is removed
When an interface is removed while it was in a bridge, the bridge was
not removed from the local ifidx list.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-02-28 19:42:40 +02:00
Nick Lowe
43022abdb9 Use 64-bit TX/RX byte counters for statistics
If the driver supports 64-bit TX/RX byte counters, use them directly.
The old 32-bit counter extension is maintained for backwards
compatibility with older drivers.

For nl80211 driver interface, the newer NL80211_STA_INFO_RX_BYTES64 and
NL80211_STA_INFO_TX_BYTES64 attributes are used when available. This
resolves the race vulnerable 32-bit value wrap/overflow. Rework RADIUS
accounting to use these for Acct-Input-Octets, Acct-Input-Gigawords,
Acct-Output-Octets, and Acct-Output-Gigawords, these values are often
used for billing purposes.

Signed-off-by: Nick Lowe <nick.lowe@lugatech.com>
2016-02-20 19:03:10 +02:00
Ayala Beker
dc55b6b672 nl80211: Add support for full station state operations
This provides means for determining whether the driver supports full AP
station state and setting the needed STA flags for using this
functionality.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
2016-02-20 18:25:13 +02:00
Jouni Malinen
99a94f5588 nl80211: Avoid wpa_printf %s call with NULL pointer in set_param()
While most C libraries print "(null)" when NULL is used as an argument
to printf format string %s, this is not really necessary to print here,
so move the debug print to be after the NULL check.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-02-18 11:59:58 +02:00
Lior David
86b5c400a0 nl80211: Basic support for PBSS/PCP
PBSS (Personal Basic Service Set) is a new BSS type for DMG
networks. It is similar to infrastructure BSS, having an AP-like
entity called PCP (PBSS Control Point), but it has few differences.
PBSS support is mandatory for IEEE 802.11ad devices.

Add a pbss flag to the relevant structures to support starting a PCP and
connecting to a PCP. Implement support in the nl80211 driver by using
the new PBSS flag attribute.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-02-08 22:16:04 +02:00
Purushottam Kushwaha
e15dcf6d1b nl8021: Avoid potential memory leak on error path
The called function nl80211_ht_vht_overrides() was not freeing "msg"
resource in error cases.

Signed-off-by: Purushottam Kushwaha <p.kushwaha@samsung.com>
2016-01-15 20:27:38 +02:00
Ilan Peer
ef3866ab01 nl80211: Don't call linux_iface_up() for a dedicated P2P Device
As a dedicated P2P Device interface does not have a network
interface associated with it, trying to call linux_iface_up()
on it would always fail so this call can be skipped for
such an interface.

Getting interface nlmode can be done only after bss->wdev_id is
set, so move this call to wpa_driver_nl80211_finish_drv_init(),
and do it only in case the nlmode != NL80211_IFTYPE_P2P_DEVICE.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-12-28 17:21:08 +02:00
Johannes Berg
0e92fb8fae rfkill: Match only the correct expected wiphy rfkill
On systems that have multiple WLAN rfkill instances, the rfkill code
can become confused into thinking that the device was unblocked when
in fact it wasn't, because it only matches on the WLAN type.

Since it then stores the new (unblocked) state from the wrong rfkill
instance, it will never retry the failing IFF_UP operation and the
user has to toggle rfkill again, or otherwise intervene manually, in
this case to get back to operational state.

Fix this by using the existing (but unused) ifname argument when the
rfkill instance is created to match to a specific rfkill index only.

As a P2P Device interface does not have a netdev interface associated
with it, use the name of a sibling interface to initialize the rfkill
context for the P2P Device interface. For nl80211, as the wiphy index
is known only after getting the driver capabilities from the kernel,
move the initialization of the rfkill object to
wpa_driver_nl80211_finish_drv_init().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-12-18 22:26:18 +02:00
Ilan Peer
6da504a1f5 nl80211: Handle rfkill for P2P Device interface
The rfkill processing in nl80211 driver assumes that the
INTERFACE_ENABLED/DISABLED will be also issued, so does not do much in
the rfkill callbacks. However, as a P2P Device interface is not
associated with a network interface, these events are not issued for it.

Handle rfkill events for the P2P_DEVICE interface by faking the
INTERFACE_ENABLED/DISABLED.

Signed-off-by: Moshe Benji <Moshe.Benji@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-12-18 22:26:18 +02:00