Commit graph

480 commits

Author SHA1 Message Date
Eliad Peller
70619a5d8a AP: Consider U-APSD driver support
Check whether the driver advertises support for U-APSD
in AP mode, and evaluate wmm_uapsd only in this case.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-12-17 11:45:53 +02:00
Jouni Malinen
a97bde0af4 Android: Fix PNO start function conversion
The wpa_hexdump_ascii() call did not get converted properly and this
was missed becaused of it getting defined out from the build. Anyway,
this better use the correct variable names should that debug print
ever be enabled for Android.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-15 01:06:02 +02:00
Jouni Malinen
aa543c0c33 nl80211: Fix CONFIG_TDLS=y build
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-12 16:32:07 +02:00
Jouni Malinen
671a50392d nl80211: Clean up info on netdev or nl80211 not found errors
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-11 18:51:55 +02:00
Arik Nemtsov
5ed3354617 nl80211: Send Probe Response template to the driver
Pass the raw Probe Response template to kernel via netlink using the
set_ap() driver callback. The data is sent as one of the Beacon
attributes.

Signed-hostap: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-12-10 21:11:32 +02:00
Arik Nemtsov
562c9d976e nl80211: Propagate Probe Response offload capabilities from kernel
Translate nl80211 flags to wpa_supplicant flags for Probe Response
offload support. The existence of the nl80211 PROBE_RESP_OFFLOAD_SUPPORT
attribute means Probe Response offload is supported. The value of the
attribute is a bitmap of supported protocols.

Signed-hostap: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-12-10 21:11:32 +02:00
Johannes Berg
341eebee38 nl80211: Store own address in BSS
Storing the address in the BSS instead of the DRV struct makes it usable
for hostapd and thus gets rid of the linux_get_ifhwaddr() call when
receiving a spurious frame.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-10 11:56:31 +02:00
Jouni Malinen
481234cf1a nl80211: Remove unnecessary struct nl80211_handles wrapper
Since the nl_cache is not used anymore, there is no need for maintaining
the struct nl80211_handles wrapper for struct nl_handle. Clean this up
by using nl_handle directly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-06 19:47:59 +02:00
Johannes Berg
3088e4e52d nl80211: Listen to unexpected 4addr events
Monitor-less AP mode had lost the ability to do
4addr WDS, this adds it back.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-06 19:32:41 +02:00
Johannes Berg
d6c9aab8d2 nl80211: Use global event socket for multicast events
This is a rewrite of Ben Greear's patch, making the
nl80211 code use just a single multicast event socket.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-06 19:30:43 +02:00
Johannes Berg
e32ad281ca nl80211: Register for Beacon frames in AP mode
When running AP mode, we need to receive beacons over overlapping BSSes
to handle protection. Use the new nl80211 command for this. As the
command works per wiphy (and we don't want to receive the Beacon frames
multiple times) add an abstraction that keeps track of per-wiphy data.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-06 18:39:57 +02:00
Johannes Berg
02bb32c393 nl80211: Subscribe to spurious class3 frame events
These events are necessary to send deauth frames to
stations sending spurious data frames. Subscribe to
them on the per-BSS event socket.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-06 18:29:45 +02:00
Johannes Berg
a11241fa11 nl80211: Use nl80211 for mgmt TX/RX in AP mode
To achieve this, multiple things are needed:
 1) since hostapd needs to handle *all* action frames,
    make the normal registration only when in a non-AP
    mode, to be able to do this use the new socket
 2) store the frequency in each BSS to be able to give
    the right frequency to nl80211's mgmt-tx operation
 3) make TX status processing reject non-matched cookie
    only in non-AP mode

The whole thing depends on having station-poll support
in the kernel. That's currently a good indicator since
the kernel patches are added together.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-06 18:24:00 +02:00
Jouni Malinen
8c3ba0784e nl80211: Use driver event to indicate failure on authentication retry
When using authentication retry within driver_nl80211.c, a failure on the
second attempt has to be indicated with a driver event since the return
code from wpa_driver_nl80211_authenticate() is not actually delivered to
the core code in that case.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-04 22:28:30 +02:00
Jouni Malinen
536fd62dba nl80211: Recover from auth req ENOENT with a scan
cfg80211 rejects NL80211_CMD_AUTHENTICATE with ENOENT if the BSS entry
for the target BSS is not available. This can happen if the cfg80211
entry has expired before wpa_supplicant entry (e.g., during a suspend).
To recover from this quickly, run a single channel scan to get the
cfg80211 entry back and then retry authentication command again. This
is handled within driver_nl80211.c to keep the core wpa_supplicant
implementation cleaner.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-04 21:53:56 +02:00
Johannes Berg
9f12614b8c nl80211: Do not encrypt IEEE 802.1X WEP EAPOL
Set the NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT flag for nl80211 to tell
drivers (mac80211) to not encrypt the EAPOL frames for WEP IEEE 802.1X.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 20:46:12 +02:00
Johannes Berg
cc7a48d1f4 nl80211: Allocate nl CB for BSS RX
In preparation for things that receive on a BSS-specific handle,
allocate a CB for it and hook it up to receive functions.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 20:14:53 +02:00
Johannes Berg
f06aedd92f nl80211: Rename process_event
The next patch will add process_bss_event, rename process_event to
process_drv_event to differentiate between them.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 20:10:44 +02:00
Johannes Berg
a4ae123c3f nl80211: Pass cb to eloop function
By passing the nl_cb as the context to the eloop function we can
(in the next patch) use the same eloop function for BSS events.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 20:07:54 +02:00
Johannes Berg
1afc986d84 nl80211: Use one CB for driver event RX
There's no need to clone the CB all the time
and then assign it, just use a constant one.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 20:00:11 +02:00
Johannes Berg
e4fb216769 nl80211: Store frequency in bss struct
Storing the frequency in the bss struct allows using it for frame
commands in AP mode and not relying on the driver struct as much, which
is good for hostapd mode.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 19:55:22 +02:00
Johannes Berg
3fd1cefb81 nl80211: Move AP SME setup to mode change
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 19:47:01 +02:00
Johannes Berg
32ab485503 nl80211: Use socket error queue for EAPOL TX status
This will allow getting TX status for EAPOL frames
sent as data frames if the driver supports it.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 19:32:23 +02:00
Jouni Malinen
aef85ba204 nl80211: Ignore interface up event if interface is down
The RTM_NEWLINK even can have IFF_UP flag even if the interface is
down. Do not generate EVENT_INTERFACE_ENABLED event based on such a
message.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 13:18:57 +02:00
Jouni Malinen
3b1c7bfdc5 nl80211: Use binary hexdump for scan IEs instead of text
The IEs are binary data, so there is not much point in trying
to show them as ASCII data in debug prints.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 12:47:34 +02:00
Jouni Malinen
e5693c4775 Merge set_rate_sets() driver_ops into set_ap()
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 12:16:03 +02:00
Jouni Malinen
5f17b3ee9f Remove unused parameters from set_rate_sets()
Only setting of the basic rate set was supported, so remove the
unused parameters.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 11:57:13 +02:00
Jouni Malinen
d03e8d118c nl80211: Merge ap_isolate configuration into nl80211_set_bss()
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 11:43:18 +02:00
Dmitry Shmidt
216eede830 Android: nl80211: Add Android specific PNO configuration
This is based on the Android driver_cmd changes that are converted to
use the sched_scan/stop_sched_scan driver_ops for the case where the
driver does not support the new nl80211 commands.

Change-Id: Iaedc340f84650af422bd2ea57d2a8b0a9d4a5330
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-11-29 15:18:52 +02:00
Jouni Malinen
fb67eec6f8 nl80211: Do not set sched_scan filter if driver does not support it
cfg80211 will reject the NL80211_CMD_START_SCHED_SCAN if too many
match sets are requested. To avoid being completely unable to start
any scheduled scans, skip setting these filters if the driver did
not advertise support for large enough number of match sets.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-25 17:46:00 +02:00
Jouni Malinen
29f338af26 nl80211: Implement set_p2p_powersave for legacy_ps changes
This adds initial implementation of set_p2p_powersave to allow legacy PS
mode to be configured. P2P PS parameters are not yet supported.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-25 13:11:22 +02:00
Johannes Berg
88df0ef74f nl80211: Set offchannel-OK selectively
It's not really valid to send off-channel in all cases,
so pass whether it should be allowed or not and don't
set it in the AP case.

Also, to get the right ifindex for hostapd, pass a bss
pointer instead of the drv pointer.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 19:56:34 +02:00
Johannes Berg
221a59c9b6 nl80211: Move preq NL handle into BSS
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 19:48:49 +02:00
Jouni Malinen
ddc5327139 nl80211: Add no_ack support for NL80211_CMD_FRAME
This is needed to allow no-ACK operation with Probe Response frames
in P2P Listen state.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-19 19:32:05 +02:00
Helmut Schaa
fab2533604 nl80211: Implement noack policy for send_mlme
Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
2011-11-19 19:22:13 +02:00
Helmut Schaa
8cfa3527e1 Allow MLME frames to be sent without expecting an ACK (no retries)
In some situations it might be benefical to send a unicast frame without
the need for getting it ACKed (probe responses for example). In order to
achieve this add a new noack parameter to the drivers send_mlme callback
that can be used to advise the driver to not wait for an ACK for this
frame.

Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
2011-11-19 19:02:05 +02:00
Johannes Berg
397188521d nl80211: Support in-kernel station poll
If the kernel supports this, don't use manual null
data frame transmissions. This is one thing to get
rid of cooked monitor interfaces.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 14:23:46 +02:00
Johannes Berg
d12dab4c6f nl80211: Use non-receiving socket for EAPOL TX
The non-monitor TX currently uses a normal L2 abstraction
socket, but that will also receive frames we don't want,
so use a plain socket that isn't bound for RX. This might
be possible using the L2 abstraction, but we need a plain
socket later for getting TX status events here.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 14:00:53 +02:00
Johannes Berg
61cbe2ffd8 nl80211: Use device AP SME capability
This changes the auto-detection of whether or not the device contains
the AP SME away from monitor interface addition failing to the explicit
attribute in nl80211. Keep the old auto-detection for a little while so
that ath6kl isn't broken right away.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 13:42:49 +02:00
Jithu Jance
57ebba598d nl80211: Implement shared_freq
This patch implements shared_freq handler for driver_nl80211.c. If a
"p2p_group_add" happens after legacy STA association, then this patch
will help to start the GO on the same frequency. This is useful when
supplicant is started on multiple interface running over a singly "PHY"
and the station interface is not used for the P2P device operations.

For example, wpa_supplicant -iwlan0 ..  -N -iwlan1 ... and wlan0 is used
for station connection and wlan1 as the P2P device interface.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2011-11-19 11:23:49 +02:00
Ben Greear
3b7ea88047 nl80211: Make MLME failure messages unique
Without this, it is impossible to tell exactly which
MLME code returned the error.

Also, convert to wpa_dbg so that we get device names
in the messages.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2011-11-18 23:41:52 +02:00
Dan Williams
98ac6763ff nl80211: Fix UNSPEC signal quality reporting
r->level got assigned so it's clearly not INVALID; instead
r->qual should be invalid.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2011-11-18 23:23:45 +02:00
Johannes Berg
335d42b1a6 nl80211: Get rid of family/cache objects
All we really need is the family ID, and we can
get that with genl_ctrl_resolve() and then don't
need to worry about family/cache objects.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-16 16:42:49 +02:00
Jouni Malinen
a5c696adb4 nl80211: Verify that global driver pointer is not NULL
driver_nl80211.c assumes that global driver pointer is set, so better
make this more consistent.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-13 22:39:57 +02:00
Gary Morain
577db0aedd Prefer 5 GHz networks over 2.4 GHz networks
In scan.c, merge a channel's noise value into the scan results. When
comparing scan results, compute the signal-to-noise ratio and use it
when available. Prefer a 5 GHz network if its SNR is really big (> 30)
or if its SNR is relatively close to the other network's.
2011-10-30 21:08:21 +02:00
Jouni Malinen
b3af99d202 nl80211: Disable IEEE 802.11b rates only for P2P iftypes
Instead of hardcoding IEEE 802.11b rates to be disabled whenever
P2P support is built in and supported by the driver, do this only
when an interface is set to P2P mode (both when adding a new
interface and when changing the interface mode). This re-enables
use of IEEE 802.11b APs with CONFIG_P2P=y builds.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-10-29 22:46:58 +03:00
Jouni Malinen
97bcd562eb Remove disable_11b_rates() driver_ops
This function was used unconditionally if wpa_supplicant build
includes CONFIG_P2P=y. Adding a separate driver_ops for such use
is not really useful since the driver wrappers can do the same
internally. Remove this driver_ops and move matching functionality
into driver_nl80211.c which was the only driver wrapper using
this driver_ops callback.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-10-29 22:25:28 +03:00
Jouni Malinen
1dea5882be nl80211: Fix re-enabling of 802.11b rates
nl80211_disable_11b_rates() function was supposed to use the 'disabled'
parameter to figure out whether to disable or re-enable 802.11b rates.
In addition, the driver deinit path was now ending up re-disabling the
enabled rates at the end of the deinit operations when the interface
type was forced back to station. Both of these issues are now fixed
and the 2.4 GHz band TX rate index is cleared properly when
wpa_supplicant is stopped.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-10-29 22:12:26 +03:00
Eliad Peller
083590503b nl80211: disable_11b_rates on interface mode change
disable_11b_rates() is called on interface addition,
but not on interface type change, resulting in 11b rates
enabled on p2p interfaces.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-10-29 22:00:07 +03:00
Jouni Malinen
b106173a82 Add no_cck parameter for send_action() driver_ops
This can be used to apply the no-CCK rule conditionally depending on
which frame is being sent. The no-CCK rule applies only for P2P
management frames while SA Query and FT use cases do not have similar
restrictions.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-10-29 21:49:46 +03:00
Rajkumar Manoharan
970fa12ea2 nl80211: Add support to disable CCK rate for P2P frames
Add a new attribute to specify whether to use CCK rate or not during
scan and sending management frames. This helps to send P2P probes
at non-CCK rate. This ensures that P2P probe request/response/action
frames are always sent at non-CCK rates.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
2011-10-29 21:23:27 +03:00
Jouni Malinen
59d249255c nl80211: Ignore netlink interface down if interface is up
The netlink event processing is delayed since they are only returned
after control returns to eloop. This can result in netlink down events
being processed at a point when the interface has is actually still
there (the first event on new interface is down) and that can result in
odd behavior especially when the resulting interface-disabled event is
delivered to AP mode interface with wpa_supplicant.

Work around this by filtering netlink down events if the matching
interface is up at the time the netlink event is processed. This fixes
an issue brought up by commit 36d84860bb.
2011-10-28 21:08:15 +03:00
Arik Nemtsov
45b722f150 TDLS: Add peer as a STA during link setup
Before commencing setup, add a new STA entry to the driver representing
the peer. Later during setup, update the STA entry using information
received from the peer.

Extend sta_add() callback for adding/modifying a TDLS peer entry and
connect it to the TDLS state machine. Implement this callback for the
nl80211 driver and send peer information to kernel.

Mark TDLS peer entries with a new flag and translate it to a
corresponding nl80211 flag in the nl80211 driver.

In addition, correct TDLS related documentation in the wpa_driver_ops
structure.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:19:35 +03:00
Arik Nemtsov
35287637cc TDLS/nl80211: Support receiving TDLS discovery response frames
Register for the TDLS discovery response public action frame in nl80211.
Print out a debug message when a Discovery Resp frame is received and
validated.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:18:35 +03:00
Arik Nemtsov
03ea178603 nl80211: Implement TDLS callback functions and propagate capabilities
Allow passing high-level TDLS commands and TDLS frames to kernel
via new nl80211 commands.

Propagate TDLS related nl80211 capability flags from kernel and add them
as driver capability flags.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:15:05 +03:00
Jouni Malinen
8c66e18511 nl80211: Handle special TDLS direct link key index use
An ugly hack is currently used to indicate keys for TDLS direct link:
key_idx == -1. That needs to be converted to 0 for cfg80211 to accept
the key.
2011-10-23 22:14:05 +03:00
Jouni Malinen
e3b473eb4e Allow driver wrappers to indicate whether HT info is known
This is needed to be able to figure out whether the driver is known
not to support HT.
2011-10-23 17:21:39 +03:00
Jouni Malinen
bd2df8921b nl80211: Remove some unnecessary ifdef HOSTAPD blocks 2011-10-22 22:51:49 +03:00
Jouni Malinen
9e0e6902a2 Share a single wpa_scan_results_free() implementation
There is not really a very good location for this anywhere, but the
function is small enough to live as an inline function for now.
2011-10-22 22:09:40 +03:00
Ben Greear
c81eff1a61 nl80211: Use one global ioctl socket
Saves sockets when using multiple VIFS in a single
wpa_supplicant process.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2011-10-22 21:39:42 +03:00
Ben Greear
276e2d671c nl80211: Use a global netlink command object
Netlink sockets can be shared among all driver instances, saving
sockets and memory when using multiple interfaces in a single process.
2011-10-22 20:06:32 +03:00
Ben Greear
2a7b66f574 nl80211: Use global nl_cb template
All interfaces can share a single nl_cb template.
2011-10-22 20:06:30 +03:00
Ben Greear
dac12351d8 nl80211: Clean up error path in wpa_driver_nl80211_init
No need to duplicate the deinit code since wpa_driver_nl80211_deinit()
can be used here to clean up after a failure.
2011-10-22 18:28:06 +03:00
Johannes Berg
a92dfde818 nl80211: Abstract handle/cache (de)allocation
This is a cleanup now and makes it easier to add more sockets in the
future.
2011-10-22 16:56:43 +03:00
Johannes Berg
7635bfb071 nl80211: Fix hostapd error path
i802_init() tries to clean up everything manually, call
wpa_driver_nl80211_deinit() instead and also handle the
EAPOL socket properly.
2011-10-22 13:04:47 +03:00
Ben Greear
36d84860bb nl80211: Use global netlink rtm event object
Netlink sockets can be shared among all driver instances, saving lots
of sockets, spurious log messages, memory, and CPU usage when using
multiple interfaces in a single process.
2011-10-22 12:39:05 +03:00
Jouni Malinen
4b24282a17 hostapd: Call global_init/global_deinit driver_ops
Now both wpa_supplicant and hostapd allow the driver wrappers to use the
global context similarly.
2011-10-22 12:22:59 +03:00
Jouni Malinen
9fb0407055 nl80211: Use a wrapper for genlmsg_put
This reduces the code size by a kilobyte or so and makes it easier
to replace the netlink instances to be shared among interfaces.
2011-10-22 11:29:03 +03:00
Johannes Berg
e8b5e24e04 nl80211: Clean up capability querying
There's no need to store everything once and then copy it. Just fill the
capa struct directly in the function that parses the info from nl80211.
2011-10-20 21:57:32 +03:00
Johannes Berg
9b90955ec7 AP: Pass only bssid/addr/wds to EVENT_RX_FROM_UNKNOWN 2011-10-20 21:51:32 +03:00
Jouni Malinen
6e8183d714 nl80211: Stop more quickly on initialization errors
Stop on fatal errors like an attempt to use a non-existing interface or
not have root privileges to avoid producing confusing error messages.
2011-10-20 21:36:36 +03:00
Johannes Berg
40442f5b48 nl80211: Compat code for genl_ctrl_alloc_cache
It's really a waste of bits to duplicate the code for
genl_ctrl_alloc_cache() again and again -- just add a
wrapper like in iw.
2011-10-20 21:08:26 +03:00
Johannes Berg
bcf24348ed AP: Do station poll in driver wrapper
This offloads the station polling to driver wrappers, which may offload
it again to the driver. The hostap driver wrapper uses "real" data
frames while nl80211 uses null data frames.

Also add a specific event to indicate that a poll was successful for
future use with the nl80211 driver.
2011-10-20 21:03:08 +03:00
Jouni Malinen
31357268e5 Move AP BSS configuration parameters into set_ap()
Remove the separate driver_ops functions set_cts_protect(),
set_preamble(), set_short_slot_time(), and set_ht_params(). These
belong into same set of operations as set_ap(), so there is no need
to maintain separate functions that just make the driver wrapper
more complex.

Since these have only been used with driver_nl80211.c, the driver_ops
can be removed immediately instead of maintaining backwards
compatibility period with the old functions.
2011-10-17 19:31:33 +03:00
Jouni Malinen
fd13a54180 Deprecate set_intra_bss() driver_ops
The AP client isolation parameter is now available through set_ap().
driver_nl80211.c was the only driver wrapper using the set_intra_bss()
call in hostap.git, but some external trees may have used this. Once
those are cleared, the set_infra_bss() driver_ops can be removed
completely. The only remaining use case for it currently is in P2P
GO mode with wpa_supplicant.
2011-10-17 18:58:46 +03:00
Jouni Malinen
71269b3708 WNM: Add BSS Transition Management Request for ESS Disassoc Imminent
"hostapd_cli ess_disassoc (STA addr) (URL)" can now be used to send
an ESS Dissassociation Imminent notification to the STA. This event
is shown in wpa_supplicant ctrl_iface monitors (e.g., wpa_cli):
"WNM: ESS Disassociation Imminent - session_info_url=http://example.com/session/"
2011-10-16 23:55:34 +03:00
Jouni Malinen
4fe9fa0d29 nl80211: Register GAS frames for Interworking
The GAS frames are used both with P2P and Interworking, so register
them if CONFIG_INTERWORKING is used without CONFIG_P2P.
2011-10-16 23:55:34 +03:00
Luciano Coelho
bd525934e5 nl80211: Add support for sched_scan filtering
Use the SSID filter list passed in the scheduled scan request down to
the kernel driver, so it can use the list to return only the wanted
SSIDs. Some kernel drivers can use this information to offload the
SSID filter to the hardware, helping with reducing the power
consumption.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-15 18:53:14 +03:00
Luciano Coelho
d21c63b925 nl80211: Add scheduled scan support
This commit adds scheduled scan support in the nl80211 driver.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-15 18:53:13 +03:00
Jouni Malinen
44dc872ee5 nl80211: Add debug print for channel changes 2011-10-15 13:29:56 +03:00
Jithu Jance
6758b1677a nl80211: Use shorter monitor interface name for P2P GO
Currently the P2P Interface name[p2p-%s-%d] is reset when the P2P
Interface name reaches the "IFNAMSIZ" limit. Monitor interface name is
derived from p2p interface name with the addition of few characters
[mon.p2p-%s-%d] and hence Monitor interface name hits IFNAMSIZ limit
before P2P Interface name. Rename the monitor interface name to
mon-%s-%d to reduce the length to same with p2p-%s-%d.
2011-10-15 13:07:30 +03:00
Vivek Natarajan
004ba773ce nl80211: Add driver flag for firmware-based BSS selection
This new flag can be used to change wpa_supplicant behavior in the
default ap_scan=1 mode to move BSS selection into the driver (likely
firmware). This commit is only adding the flag; separate commits
will be used to change the actual connection/roaming behavior.
2011-09-26 14:26:55 +03:00
Pavel Roskin
ffbf1eaa26 Fix typos found by codespell
Signed-off-by: Pavel Roskin <proski@gnu.org>
2011-09-22 00:43:59 +03:00
Jouni Malinen
c36d52427a nl80211: Support PMKSA candidate events
This adds support for RSN pre-authentication with nl80211 interface and
drivers that handle roaming internally (i.e., wpa_supplicant is not
responsible for requesting scan results that provide the needed
information without these events).
2011-09-21 16:14:41 +03:00
Jouni Malinen
20f5a4c24c nl80211: Work around EALREADY from connect command
cfg80211 does not currently allow NL80211_CMD_CONNECT when there
is already an association. This can result in wpa_supplicant being
unable to request a connection if the interface is already in
connected state. Work around this by requesting disconnection if
the connect command fails with EALREADY error. This allows
wpa_supplicant to recover from the unexpected state and complete
the connect request on next attempt.
2011-09-18 21:26:55 +03:00
Johannes Berg
531f0331a1 nl80211: Cancel not yet started r-o-c
Currently, the following can happen:

1) P2P state machine requests R-O-C
2) user changes their mind and aborts
3) P2P state machine aborts R-O-C
4) driver_nl80211 rejects abort since there
   was no notification about the start yet
5) R-O-C period start notification from kernel
6) P2P state machine requests new R-O-C
7) this overlaps with old R-O-C -- iwlwifi driver
   can't handle that and returns -EBUSY
8) state machine stops dead in its tracks

The reason is that the abort isn't going through properly. Instead of
tracking whether a R-O-C is active in driver_nl80211, track whether one
was requested to avoid this scenario.

Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-09-10 22:57:41 +03:00
Rajkumar Manoharan
47185fc788 P2P: Remove CCK supported rates when running P2P scan
This allows drivers to disable CCK rates from Probe Request frames.
For nl80211, this is currently applying only to the supported rates
element(s), but this mechanism could be extended to address TX rate
control masking, too, to lessen need for global rate disabling.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
2011-09-10 22:40:30 +03:00
Johannes Berg
7626850dd6 nl80211: Automatically use concurrent P2P if possible
Since the kernel can now advertise P2P concurrent support by advertising
interface combinations, we can take advantage of that and automatically
use P2P_CONCURRENT / P2P_MGMT_AND_NON_P2P for drivers that advertise
support.

Keep driver_param=use_p2p_group_interface=1 for anyone not advertising
interface combinations in their drivers yet.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-09-10 21:52:21 +03:00
Jouni Malinen
64fa840a97 nl80211: Fix WPA_VERSIONS attribute for Connect command
The previous code was trying to figure out which WPA version is
used based on the extra IEs requested for Association Request. That
did not work properly in cases where non-WPA networks are used with
some extra IEs. Fix this by using more robust mechanism for passing
the WPA versions from core wpa_supplicant to the driver_ops
associate().
2011-09-02 20:40:23 +03:00
Jouni Malinen
86957e6298 nl80211: Support AP mode probe/action frame TX/RX without monitor iface
This allows non-mac80211 drivers to report received Probe Request
frames to user space and Probe Response and Action frames to be sent
from user space when using AP/P2P GO mode.
2011-08-29 14:26:55 +03:00
Jouni Malinen
4dc03726de Delay STA entry removal until Deauth/Disassoc TX status in AP mode
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. The STA
entry (and PTK) will be removed from the kernel only after the
Deauth/Disassoc has been transmitted (e.g., when the STA wakes up).
A hardcoded two second timeout is used to limit the length of this
window should the driver fail to deliver the frame (e.g., the STA
is out of range and does not wake up). The kernel STA entry is
marked unauthorized during the wait to avoid accepting Data
frames from the STA that we have decided to disconnect.

This behavior is available only with drivers that provide TX status
events for Deauth/Disassoc frames (nl80211 at this point). Other
drivers continue to use the previous behavior where the STA entry
is removed immediately.
2011-08-28 23:07:02 +03:00
Jouni Malinen
fb91db5639 Provide extra IEs for AP mode management frames with set_ap
Drivers that build Beacon, Probe Response, and (Re)Association
Response frames can use this information to and WPS and P2P IE
when needed.
2011-08-26 21:14:25 +03:00
Jouni Malinen
97a7a0b504 Add support for setting SSID hiding mode through set_ap() 2011-08-26 21:12:47 +03:00
Jouni Malinen
b11d1d6439 Add crypto parameters to set_ap() command separately
This helps drivers that build the Beacon and Probe Response frames
internally.
2011-08-26 21:11:42 +03:00
Jouni Malinen
ccb941e6da Add SSID as a separate item in AP mode Beacon setup
This makes it easier for drivers that need the SSID to get it from the
Beacon setup operation without having to parse the Beacon IEs.
2011-08-10 13:29:32 +03:00
Jouni Malinen
19c3b56685 Replace set_beacon() driver op with set_ap()
This change is a first step in better supporting different driver
architectures for AP mode operations with nl80211. This commit in
itself does not add new functionality, but it makes it easier to add
new AP mode parameters to address needs of drivers that have more of
the MLME/SME in firmware or kernel.
2011-08-10 13:22:37 +03:00
Jouni Malinen
5fb1a23252 nl80211: Fix hostapd build 2011-08-09 23:32:26 +03:00
Jouni Malinen
f10bfc9adb nl80211: Add l2_packet for AP mode EAPOL TX without monitor iface
This can be used with drivers that do not support monitor interface
when transmitting EAPOL frames in AP mode.
2011-08-09 14:04:53 +03:00
Jouni Malinen
9db931ed6d nl80211: Do not include NL80211_ATTR_DURATION in TX frame if zero
When offloading of the offchannel TX wait is not used, it is better to
not include NL80211_ATTR_DURATION to avoid confusing nl80211/cfg80211.
2011-08-09 14:01:31 +03:00
Jouni Malinen
a381f2a286 nl80211: Fix connect command to not claim WPA if WPS is used
Such using params->wpa_ie to figure out whether the connection is for
WPA/WPA2 is not correct since that buffer is used also to add WPS IE. In
case of WPS, do not add NL80211_ATTR_WPA_VERSIONS to avoid confusing
drivers.
2011-08-09 13:59:43 +03:00
Jouni Malinen
a05225c819 nl80211: Add more debug information on frame TX command failures 2011-08-09 13:59:12 +03:00
Eliad Peller
2f4f73b154 nl80211: Change vif type to P2P_CLI upon P2P authentication
Currently, wpa_driver_nl80211_authenticate() changes the interface type
to station. However, in case of P2P, we need to change the interface
type to P2P_CLI.

Add p2p field to the authentication params, and consider it for choosing
the correct interface type.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-07-17 20:25:58 +03:00
Eliad Peller
b1f625e0d8 nl80211: Consider P2P when changing vif type
Commit 9f51b11395 added support for P2P
interfaces when adding a new interface. However, it didn't handle the
case in which the same interface is being used and its type is being
changed. Add support for this case.

Consequently, when doing "ap_scan_as_station" we now need to save the
actual AP interface type (AP/P2P GO) in order to restore it properly.
For that, change ap_scan_as_station type from int to nl80211_iftype, and
set it to NL80211_IFTYPE_UNSPECIFED when not used.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-07-17 20:22:11 +03:00
Jouni Malinen
ff6a158b40 nl80211: Do not re-set iftype when initializing added interface
There is no need to force the interface into station mode when
wpa_supplicant adds a new interface (e.g., P2P group) with the correct
iftype.
2011-07-17 20:03:25 +03:00
Jouni Malinen
a1922f934d nl80211: Add more debug info for iftype changes 2011-07-17 19:47:41 +03:00
Jouni Malinen
7d9c369827 nl80211: Ignore ifdown event if mode change triggered it
When driver_nl80211.c has to set the netdev down to change iftype, an
RTM_NEWLINK event is generated. Do not generate
EVENT_INTERFACE_DISABLED event based on that.
2011-07-17 13:56:34 +03:00
Johannes Berg
f67eeb5c32 nl80211: fix interface address assignment
When a new interface is created and already has a separate MAC address
assigned by the kernel, then we need to use that address, not just when
we've created a locally administered address.

This fixes use_p2p_group_interface=1 for iwlagn as it already makes
mac80211 assign an address for a second interface since the hardware has
two addresses assigned.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-07-15 12:05:19 +03:00
Johannes Berg
b14a210ce2 nl80211: Support GTK rekey offload
Add support to wpa_supplicant for device-based GTK rekeying. In order to
support that, pass the KEK, KCK, and replay counter to the driver, and
handle rekey events that update the latter.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-07-12 21:22:51 +03:00
Arik Nemtsov
95ab606345 nl80211: Send STA flags to kernel on station addition
Send STA flags to kernel when adding a new station. This ensures
stations are added with up to date flags by kernel drivers.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-07-12 20:28:31 +03:00
Jouni Malinen
5f310a9e24 nl80211: Process association/disassociation events in AP mode
This allows non-mac80211 drivers that implement AP mode SME/MLME
in firmware or driver to notify hostapd/wpa_supplicant of AP mode
association events.
2011-07-01 18:44:09 +03:00
Jouni Malinen
866af8b6bd nl80211: Allow AP mode to be started without monitor interface
This is in preparation for supporting AP mode with SME/MLME in the
driver/firmware.
2011-06-28 21:59:44 +03:00
Jouni Malinen
a6efc65ddb nl80211: Add support for driver-based PMKSA cache
Implement PMKSA cache operations add, remove, and flush using nl80211
commands NL80211_CMD_{SET,DEL,FLUSH}_PMKSA to support PMKSA caching
with drivers that select the AP and generate the RSN IE internally.
2011-06-20 10:17:33 +03:00
Jouni Malinen
f07ead6af9 nl80211: Re-order functions to group AP/hostapd specific code
Get rid of separate ifdef/endif blocks for AP specific and hostapd
specific code, i.e., only have one main block of code for each case.
2011-05-27 19:02:04 +03:00
Jouni Malinen
f7b3920c90 nl80211: Enable more AP callbacks for non-hostapd AP mode
Some of these are required for proper functionality (like
get_seqnum); others may not be needed yet, but including them
allows some extra ifdef/endif blocks to be removed.
2011-05-27 18:54:36 +03:00
Eliad Peller
257da77362 nl80211: Implement set_rate_sets for non-hostapd AP case
.set_rate_sets is not defined for non-hostapd, which prevents
configuring basic_rates when working as P2P GO.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-05-27 18:41:46 +03:00
Jouni Malinen
46957a9b2d nl80211: Filter out duplicated BSS table entries from scan results
cfg80211 maintains separate BSS table entries for APs if the same
BSSID,SSID pair is seen on multiple channels. wpa_supplicant does
not use frequency as a separate key in the BSS table, so filter out
duplicated entries. Prefer associated BSS entry in such a case in
order to get the correct frequency into the BSS table.
2011-05-16 19:18:42 +03:00
Jouni Malinen
f5a8d42229 nl80211: Fetch assoc_freq from scan table for connect event
When kernel-based SME is used, use the scan table to find a BSS entry
for the associated AP when processing connected event.
2011-05-16 18:35:42 +03:00
Jouni Malinen
3f3602386e nl80211: Add support for auth_alg auto-selection with connect command
When the SME is in the driver or cfg80211, the automatic selection
of auth_alg is done by leaving out the NL80211_ATTR_AUTH_TYPE
attribute from the NL80211_CMD_CONNECT command.
2011-04-07 14:53:40 +03:00
Felix Fietkau
4378fc14eb nl80211: Send EAPOL frames as QoS data frames for QoS aware clients
This should fix EAPOL reauthentication and rekeying timeout issues
with Intel clients when using WMM (e.g., with IEEE 802.11n). These
stations do not seem to be able to handle EAPOL data frames as
non-QoS Data frames after the initial setup.

This adds STA flags to hapd_send_eapol() driver op to allow
driver_nl80211.c to mark the EAPOL frames as QoS Data frame
when injecting it through the monitor interface.
2011-04-02 22:03:05 +03:00
Paul Stewart
1c5c7273f5 driver: Function to directly poll signal quality
This provides a means for the supplicant to directly request signal
quality metrics from the driver. This is useful, for example for
background scan algorithms that might ask desire this information
out-of-band with CQM events.

Signed-off-by: Paul Stewart <pstew@google.com>
2011-03-31 17:56:48 +03:00
Jouni Malinen
2fee890af7 Add driver capa flag for EAPOL TX status and store capa in hostapd 2011-03-29 17:36:06 +03:00
Jouni Malinen
21bdbe38be nl80211: Implement deauth for IBSS as leave IBSS command 2011-03-23 21:15:22 +02:00
Jouni Malinen
ef985058f4 nl80211: Use NL80211_CMD_DEL_STATION event to indicate IBSS peer loss 2011-03-23 15:32:55 +02:00
Johannes Berg
c4bb881743 nl80211: Do not add interface to the global list in case of failure
This avoids leaving a freed interface on the global list in case
driver initialization fails.
2011-03-22 15:52:04 +02:00
Johannes Berg
ee7ab173c7 nl80211: Implement deauth/disassoc for non-HOSTAPD case
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-16 16:11:05 +02:00
Jouni Malinen
e17a2477db nl80211: Extend bridge add/del operations for secondary BSSes
Previously, only the main interface was added to a bridge. Extend this
to apply to all configured BSSes.
2011-03-15 13:02:49 +02:00
Raghunathan Kailasanathan
58708b3bd1 nl80211: Use nl_atype() from libnl
libnl provides nla_type() which can be used to derive nla_type from
struct nlattr.
2011-02-22 21:48:49 +02:00
Johannes Berg
89e07afb2c nl80211: Use max_remain_on_chan data from nl80211
If the driver advertises max_remain_on_chan data, use it instead of
the hardcoded value of 5000. Keep the default at 5000 since that is the
value used by earlier versions of cfg80211/mac80211 and not advertised
in nl80211 for those.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-02-01 18:18:32 +02:00
Eliad Peller
f14f5141a0 nl80211: Remove excessive nl80211_set_mode() call
When authenticating, and the interface type is not already
NL80211_IFTYPE_STATION, we need to call wpa_driver_nl80211_set_mode()
only once. Remove the excessive call.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-02-01 16:38:38 +02:00
Johannes Berg
9f51b11395 nl80211: use P2P interface types
We can use the P2P interface types to check if the driver supports P2P
and to tell the kernel that a given interface is going to be used for
P2P (when it is created).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-01-31 21:49:48 +02:00
Helmut Schaa
f1bed4a70d nl80211: Make use of the ht opmode bss attribute
In order to enable protection mechanisms for different HT opmodes the
driver needs to be aware of the current HT opmode that is calculated by
hostapd. Hence, pass the current opmode to the nl80211 driver via
the bss attribute NL80211_ATTR_BSS_HT_OPMODE.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2011-01-30 21:16:29 +02:00
Jouni Malinen
60ea8187c9 nl80211: Set NL80211_ATTR_KEY_DEFAULT_TYPES based on set_key addr
This allows mac80211 to configure default keys properly for RSN IBSS
mode.
2011-01-09 19:54:50 +02:00
Jouni Malinen
0382097ef3 Use set_key addr to distinguish default and multicast keys
Previously, both NULL and ff:ff:ff:ff:ff:ff addr were used in various
places to indicate default/broadcast keys. Make this more consistent
and useful by defining NULL to mean default key (i.e., used both for
unicast and broadcast) and ff:ff:ff:ff:ff:ff to indicate broadcast
key (i.e., used only with broadcast).
2011-01-09 19:44:28 +02:00
Jouni Malinen
8546ea1930 nl80211: Avoid infinite loop when searching a BSS
When hostapd is removing a virtual BSS interface, the loop here was
incorrectly not updating the iterator during list traversal and
ended up in an infinite loop in some cases.
2011-01-09 19:18:50 +02:00
Johannes Berg
5dfca53fc0 nl80211: Use driver-based off-channel TX if available
If the underlying driver supports off-channel TX, it will now be used by
the nl80211 driver wrapper, setting WPA_DRIVER_FLAGS_OFFCHANNEL_TX
accordingly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-12-29 14:05:34 +02:00
Johannes Berg
190b9062b2 P2P: Add option for offloading off-channel TX to the driver
With the new kernel functionality coming to Linux to allow off-channel
TX, we can take advantage of that in the P2P code that currently uses
remain-on-channel. If a driver advertises support for it, it will be
asked to handle off-channel TX by itself.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-12-29 13:59:17 +02:00
Johannes Berg
0d7e5a3a29 Allow AP mode to disconnect STAs based on low ACK condition
The nl80211 driver can report low ACK condition (in fact it reports
complete loss right now only). Use that, along with a config option, to
disconnect stations when the data connection is not working properly,
e.g., due to the STA having went outside the range of the AP. This is
disabled by default and can be enabled with disassoc_low_ack=1 in
hostapd or wpa_supplicant configuration file.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-12-28 17:15:01 +02:00
Jouni Malinen
79c3124ce5 nl80211: Remove extra \n from debug messages 2010-12-19 12:00:24 +02:00
Jouni Malinen
7d878ca769 Use SA Query procedure to recovery from AP/STA state mismatch
If a station received unprotected Deauthentication or Disassociation
frame with reason code 6 or 7 from the current AP, there may be a
mismatch in association state between the AP and STA. Verify whether
this is the case by using SA Query procedure. If not response is
received from the AP, deauthenticate.

This implementation is only for user space SME with
driver_nl80211.c.
2010-12-19 11:58:00 +02:00
Masashi Honma
2136f48020 nl80211: Stop driver init sooner if the interface does not exist 2010-12-17 13:55:13 +02:00
Jouni Malinen
2397086869 nl80211: Add forgotten deinit code on failure path 2010-12-17 13:49:38 +02:00
Jouni Malinen
aca0160548 nl80211: Set cipher suites when using user space SME
Previously, pairwise and group cipher suites were configured only
when kernel SME (nl80211 connect API) was used. However, mac80211
needs this information even in the user space SME case for one
thing: to disable HT when TKIP/WEP is used. Add
NL80211_ATTR_CIPHER_SUITES_PAIRWISE to fix this special case with
user space SME. This allows mac80211 to disable HT properly when
the AP is configured with configuration that is not allowed.
2010-12-13 21:08:53 +02:00
Jouni Malinen
89c38e32c7 RSN IBSS: RX GTK configuration with nl80211
This add preliminary code for setting the per-STA RX GTK for
RSN IBSS when nl80211 drivers. For some reason, this does not
seem to fully work, but at least driver_nl80211.c is now aware of
what kind of key is being set and the whatever is missing from
making this key configuration go through should be specific to
nl80211/cfg80211.
2010-12-04 20:31:22 -08:00
Jouni Malinen
18d2ba083b nl80211: Generate EVENT_IBSS_RSN_START events
This is needed to trigger start of 4-way handshake when a new STA is
detected in an RSN IBSS.
2010-12-04 18:17:58 -08:00
Jouni Malinen
482856c8ba nl80211: Fix compiler warnings on non-P2P build 2010-11-27 13:05:37 +02:00
Ben Greear
6859f1cb24 Enable sharing of scan result events among virtual interfaces
When controlling multiple virtual interfaces on the same physical
radio, share the scan results events with sibling interfaces. This
decreases the time it takes to connect many virtual interfaces.

This is currently only supported on Linux with cfg80211-based
drivers when using nl80211 or wext driver interface.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2010-11-26 21:46:30 +02:00
Jouni Malinen
f2ed8023c4 nl80211: Track used interfaces and support multiple P2P groups
Track all the P2P group interfaces within driver_nl80211.c to make
it easier to generate unique P2P Interface Addresses.
2010-11-26 18:14:51 +02:00
Jouni Malinen
871f4dd069 Allow driver wrappers to indicate whether result codes are sane
Some drivers are not providing exactly reliable error codes (e.g.,
with WEXT), but others may actually indicate reliable information.
Allow driver wrappers to indicate if that is the case and use
optimizations if so. For now, this improves nl80211 with
NL80211_CMD_CONNECT for a case where connection request fails.
2010-11-26 17:41:21 +02:00
Jouni Malinen
df89c1c8d1 nl80211: Add BSSID to NL80211_CMD_CONNECT assoc reject event 2010-11-26 17:40:10 +02:00
Jouni Malinen
ce04af5a74 nl80211: Fix NL80211_CMD_CONNECT with WPA/WPS networks 2010-11-26 17:39:31 +02:00