Commit graph

762 commits

Author SHA1 Message Date
Jouni Malinen
c720f2cd56 nl80211: Remove inclusion of unneeded header files 2009-04-14 15:03:07 +03:00
Jouni Malinen
071f8ac4df nl80211: Fix management frame sending after driver_ops cleanup
hostapd ended up with unregistered send_mlme() in commit
9f324b61ba. Fix this by registering the
handler both for wpa_supplicant-AP and hostapd use. [Bug 310]
2009-04-14 13:12:58 +03:00
Jouni Malinen
b4fd6fab5b Share driver beacon configuration handlers 2009-04-09 23:44:39 +03:00
Jouni Malinen
92f475b4d8 Merge hostapd driver init functions into one
Use a parameter structure to pass in information that can be more easily
extended in the future. Include some of the parameters that were
previously read directly from hapd->conf in order to reduce need for
including hostapd/config.h into driver wrappers.
2009-04-09 23:28:21 +03:00
Jouni Malinen
989f52c639 Remove unneeded inclusion of hostapd header files 2009-04-09 20:53:29 +03:00
Jouni Malinen
2135f224db nl80211: Share common interface processing code 2009-04-09 20:41:21 +03:00
Jouni Malinen
072ad14cc4 nl80211: Share monitor mode filtering and reading functions 2009-04-09 20:20:21 +03:00
Jouni Malinen
e785c2ba3b Share same set_country driver op for hostapd and wpa_supplicant 2009-04-09 20:01:25 +03:00
Jouni Malinen
9f324b61ba Share management frame send driver op for hostapd and wpa_supplicant
The same implementation can be shared in most cases, so better share the
same driver_ops handler function.
2009-04-09 19:57:20 +03:00
Jouni Malinen
8342130269 Remove flags parameter from send_mgmt_frame() driver op
This was not documented properly and was not really used nor would it be
suitable to be used in generic way as it was implemented. It is better
to just remove the parameter since there does not seem to be any
reasonable use for it.
2009-04-09 19:42:19 +03:00
Jouni Malinen
5b7b85f669 nl80211: Replace hostapd WEXT events with nl80211 events
This shares the nl80211 event processing with wpa_supplicant and removes
the old WEXT code from driver_nl80211.c.
2009-04-09 17:10:22 +03:00
Jouni Malinen
35583f3fa6 nl80211: Add Michael MIC failure event processing for wpa_supplicant 2009-04-09 16:50:48 +03:00
Jouni Malinen
1ad1cdc241 nl80211: Merge hostapd and wpa_supplicant key configuration
No need to duplicate more or less identical code.
2009-04-09 16:31:11 +03:00
Francesco Gringoli
5a0ffb5f1f nl80211: Fix channel 14 use
nl80211 interface has a trivial bug that prevents it to work correctly
with channel 14. Channel frequency is erroneously 2848 instead of 2484.
To correct it just apply this patch. [Bug 308]
2009-04-09 14:51:31 +03:00
Jouni Malinen
c3965310e6 Use common get_hw_feature_data for hostapd and wpa_supplicant
This merges the driver wrapper implementations to use the same
implementation both for hostapd and wpa_supplicant operations to avoid
code duplication.
2009-04-09 14:11:39 +03:00
Jouni Malinen
c51218372f Merge wpa_supplicant and hostapd driver wrapper implementations
This commit merges the driver_ops structures and implementations from
hostapd/driver*.[ch] into src/drivers. This is only an initial step and
there is room for number of cleanups to share code between the hostapd
and wpa_supplicant parts of the wrappers to avoid unnecessary source
code duplication.
2009-04-09 13:40:12 +03:00
Jouni Malinen
a0b2f99bd7 nl80211: Fix static WEP key configuration when using SME
Need to set WEP keys before requesting authentication in order to get
Shared Key authentication working. Previously, the WEP keys were not set
at all when using SME in wpa_supplicant.
2009-04-04 16:58:16 +03:00
Jouni Malinen
282d55908b wpa_supplicant AP: Add get_hw_feature_data
This is enough to allow open mode association to be completed with
driver_nl80211.c.
2009-04-03 19:11:22 +03:00
Jouni Malinen
2c2010acda Implement management frame TX for wpa_supplicant AP mode 2009-04-03 16:45:09 +03:00
Jouni Malinen
0915d02c3c wpa_supplicant AP: Add management frame RX for nl80211 2009-04-02 21:59:14 +03:00
Jouni Malinen
d2440ba01b Add Beacon configuration for wpa_supplicant AP mode 2009-04-02 16:09:48 +03:00
Jouni Malinen
2e24a366ea nl80211: Add IGTK (AES-128-CMAC) configuration
This was somehow forgotten from IEEE 802.11w/MFP patches from
wpa_supplicant -Dnl80211.
2009-04-01 17:14:07 +03:00
Jouni Malinen
efa4607800 SME: Add processing for rejected associations 2009-04-01 17:10:36 +03:00
Jouni Malinen
d61f48ba1d nl80211: Remove forgotten comment about SIOCSIWMODE 2009-03-31 15:25:10 +03:00
Jouni Malinen
1b2a72e884 nl80211: Remove SIOCGIWRANGE and assume TKIP+CCMP+WPA+WPA2
All currently known drivers that use nl80211/cfg80211 support these, so
no need to use old WEXT ioctl for figuring out capabilities.
2009-03-31 14:25:15 +03:00
Jouni Malinen
d8816397c3 nl80211: Remove WEXT Michael MIC event processing
mac80211 does not use this type of Michael MIC event, so this is not
really used and proper Michael MIC failure processing will be added
using an nl80211 event once that gets added into wireless-testing.git.
2009-03-31 14:14:16 +03:00
Jouni Malinen
e8a029fb6d nl80211: Remove WEXT_COMPAT
It looks like both new nl80211 operations (scan and auth/assoc) end up
being added in Linux 2.6.30, so we do not need to maintain the backwards
compatibility code in wpa_supplicant.
2009-03-31 14:09:30 +03:00
Jouni Malinen
d3a9822542 Add support for specifying subset of enabled frequencies to scan
A new network block parameter, scan_freq, can be used to specify subset
of frequencies to scan. This can speed up scanning process considerably
if it is known that only a small subset of channels is actually used in
the network. A union of configured frequencies for all enabled network
blocks is used in scan requests.

Currently, only driver_nl80211.c has support for this functionality.

For example, following parameter marks 2.4 GHz channels 1, 6, 11 to be
scanned: scan_freq=2412 2437 2462
2009-03-26 21:55:01 +02:00
Jouni Malinen
1581b38b67 Initial step in adding simple AP mode support into wpa_supplicant
This version is adding the configuration option (mode=2) for this and
driver capability reporting to figure out whether AP mode can be used.
However, this does not actually implement any real functionality yet.
2009-03-25 11:38:47 +02:00
Jouni Malinen
a87c9d9609 driver_nl80211: Fix initial iftype change
Need to set drv->ifindex before calling set_mode(). In addition, set the
mode before setting the interface up to avoid having to set it down
again.

Add more useful error message on mode changes.
2009-03-24 20:50:40 +02:00
Jouni Malinen
36b15723ca Deprecate set_drop_unencrypted(), set_auth_alg(), and set_mode()
All these driver handlers can be implemented in associate() handler
which gets all the needed information in the parameters structure. The
old functions that provided only a single parameter will be removed
eventually to clean up the driver_ops structure, so driver wrappers
should start using the newer mechanism.
2009-03-24 20:06:02 +02:00
Jouni Malinen
fd05d64ecf nl80211: Make get_ssid behave like get_bssid with SME
Use a local copy of SSID instead of WEXT when using wpa_supplicant-based
SME.
2009-03-20 23:03:18 +02:00
Jouni Malinen
ed384c2c67 nl80211: Make set_bssid() WEXT_COMPAT 2009-03-20 22:59:17 +02:00
Jouni Malinen
95f02a5ddd nl80211: Make PMKSA caching candidate event WEXT_COMPAT 2009-03-20 22:57:46 +02:00
Jouni Malinen
f555b6dec1 nl80211: Mark PMKSA cache operations with WEXT_COMPAT
These are not needed with wpa_supplicant SME.
2009-03-20 22:55:24 +02:00
Jouni Malinen
af723760ba nl80211: Fix no-WEXT_COMPAT build
wpa_driver_nl80211_set_ssid() and wpa_driver_nl80211_set_freq() are only
for WEXT_COMPAT now that the user space MLME code is removed.
2009-03-20 22:44:53 +02:00
Jouni Malinen
625f587b03 nl80211: Remove user space MLME code
This design did not make it into the kernel and the new user space SME
design has removed the need for keeping the experimental code.
2009-03-20 22:31:24 +02:00
Jouni Malinen
c2a0407851 Add SME support (separate authentication and association)
This can be used, e.g., with mac80211-based Linux drivers with
nl80211. This allows over-the-air FT protocol to be used (IEEE
802.11r).

Since the nl80211 interface needed for this is very recent (added
today  into wireless-testing.git), driver_nl80211.c has backwards
compatibility code that uses WEXT for association if the kernel does
not support the new commands. This compatibility code can be
disabled by defining NO_WEXT_COMPAT. That code will also be removed
at  some point to clean up driver_nl80211.c.
2009-03-20 22:26:41 +02:00
Jouni Malinen
7c2849d2a0 Add BSS flags to scan results to indicate signal quality validity
These flags are used to mark which values (level, noise, qual) are
invalid (not available from the driver) and whether level is using dBm.
D-Bus interface will now only report the values that were available.
2009-02-18 13:40:38 +02:00
Jouni Malinen
d173df5232 nl80211: Use per-scan request WPS IE
Replace the global set probe request IEs mechanism with a new nl80211
option for specifying vendor IEs for each scan request.
2009-02-18 12:49:25 +02:00
Jouni Malinen
6a1063e008 driver_nl80211: Add support for multi-SSID scan requests 2009-02-14 21:17:46 +02:00
Jouni Malinen
362f781e1c Allow multiple driver wrappers to be specified on command line
For example, -Dnl80211,wext could be used to automatically select
between nl80211 and wext. The first driver wrapper that is able to
initialize the interface will be used.
2009-02-14 16:43:43 +02:00
Jouni Malinen
7d315b7b42 nl80211: Remove one second sleep after iface up
This workaround was needed with some drivers that used WEXT, but there
is no known nl80211-enabled driver that would need this, so lets get rid
of the extra delay.
2009-02-12 22:05:36 +02:00
Jouni Malinen
80bc75f135 New driver capability info: max number of scan SSIDs
The driver wrappers can now inform wpa_supplicant how many SSIDs can
be used in a single scan request (i.e., send multiple Probe Requests
per channel). This value is not yet used, but it can eventually be used
to allow a new scan command to specify multiple SSIDs to speed up
scan_ssid=1 operations. In addition, a warning could be printed if
scan_ssid=1 is used with a driver that does not support it
(max_scan_ssids=0).
2009-02-12 22:05:32 +02:00
Jouni Malinen
97865538ba nl80211: Replace WEXT scan event with nl80211
Use the new nl80211 scan event mechanism instead of the WEXT event.
This completes the move from WEXT scanning into nl80211 scanning.
2009-02-12 20:19:49 +02:00
Jouni Malinen
b3db1e1cd3 nl80211: Replace SIOCGIWSCAN with NL80211_CMD_GET_SCAN
This replaces the WEXT mechanism for fetching scan results with the new
nl80211 mechanism.
2009-02-12 20:19:33 +02:00
Jouni Malinen
0e75527f7e nl80211: Replace SIOCSIWSCAN with NL80211_CMD_TRIGGER_SCAN
This is the first step in replacing WEXT-based scan with the new
nl80211-based mechanism.
2009-02-12 20:19:09 +02:00
Jouni Malinen
42f1ee7d1f Fixed scan buffer increasing with WEXT
We can now handle up to 65535 byte result buffer which is the maximum
due to WEXT using 16-bit length field. Previously, this was limited to
32768 bytes in practice even through we tried with 65536 and 131072
buffers which we just truncated into 0 in the 16-bit variable.

This more or less doubles the number of BSSes we can received from scan
results.
2009-02-05 12:00:23 +02:00
Jouni Malinen
3a4606585c Implement set_probe_req_ie() for nl80211 drivers 2009-01-20 14:06:02 +02:00
Jouni Malinen
7e5ba1b916 Mark functions static if not used elsewhere and use proper prototypes 2009-01-03 20:38:42 +02:00
Luis R. Rodriguez
6d1584905c wpa_supplicant: Add support for setting of a regulatory domain
This adds support for setting of a regulatory domain to wpa_supplicant
drivers. It also adds regulatory domain setting for the nl80211 driver.
We expect an ISO / IEC 3166 alpha2 in the wpa configuration file as a
global.
2008-12-09 22:11:14 +02:00
Jouni Malinen
7e45830ab7 nl80211: Include copy of linux/nl80211.h with hostapd/wpa_supplicant
This makes it easier to build the packages and allows all new features
to be built into the binary regardless of which kernel is currently
used.
2008-12-08 11:04:13 +02:00
Jouni Malinen
8e8df25541 nl80211: Finish dumps properly (ported from iw.git) 2008-10-29 19:28:35 +02:00
Jouni Malinen
6241fcb165 nl80211: clean up netlink code
This is a port of commit cafe38cae0
from Johannes Berg <johannes@sipsolutions.net> for hostapd to
wpa_supplicant driver_nl80211.c.
2008-09-30 16:46:22 +03:00
Dan Williams
ec5f180a24 Add an optional set_mode() driver_ops handler for setting mode before keys
A bug just got reported as a result of this for mac80211 drivers.

https://bugzilla.redhat.com/show_bug.cgi?id=459399

The basic problem is that since taking the device down clears the keys
from the driver on many mac80211-based cards, and since the mode gets
set _after_ the keys have been set in the driver, the keys get cleared
on a mode switch and the resulting association is wrong.  The report is
about ad-hoc mode specifically, but this could happen when switching
from adhoc back to managed mode.
2008-09-29 16:45:49 +03:00
Jouni Malinen
fd630bc183 Fixed WEXT scan result parser to not crash on invalid IEs (zero len buffer)
If IWEVGENIE or custom event wpa_ie/rsn_ie is received in scan with empty
buffer, the previous version ended up calling realloc(NULL, 0) which seems
to return a non-NULL value in some cases. When this return value is passed
again into realloc with realloc(ptr, 0), the returned value could be NULL.
If the ptr is then freed (os_free(data.ie) in SIOCGIWAP handling), glibc
may crash due to invalid pointer being freed (or double-freed?). The
non-NULL realloc(NULL, 0) return value from glibc looks a bit odd behavior,
but anyway, better avoid this case completely and just skip the IE events
that have an empty buffer.

This issue should not show up with drivers that produce proper scan results
since the IEs will always include the two-octet header. However, it seems
to be possible to see this when using 64-bit kernel and 32-bit userspace
with incorrect compat-ioctl processing.
2008-08-27 09:52:16 +03:00
Jouni Malinen
3c83f19c80 Added mlme_{add,remove}_sta() for userspace MLME
These functions are based on the hostapd implementation and complete
the userspace MLME code in wpa_supplicant (though, mac80211 will still need
couple of pending patches to be integrated in order to get userspace client
MLME working again).
2008-08-18 22:01:04 +03:00
Jouni Malinen
1c8735848d nl80211: Preliminary code for usermode MLME support
This adds some parts needed to use usermode MLME with the current mac80211
(plus a patch to add a new cfg80211 command; not yet submitted to
wireless-testing). This version creates a monitor interface for management
frames and is able to send Probe Request frames during scan. However, it
looks like management frame reception is not yet working properly. In
addition, mlme_{add,remove}_sta() handlers are still missing.
2008-08-15 22:14:49 +03:00
Jouni Malinen
7524cfb1a3 nl80211: Fixed re-initialization of removed and re-inserted interface
Network device ifindex will change when the interface is re-inserted.
driver_nl80211.c will need to accept netlink events from "unknown" (based
on ifindex) interfaces when a previously used card was removed earlier. If
the previously removed interface is added back, the driver_wext data need
to be updated to match with the new ifindex value. In addition, the initial
setup tasks for the card (set interface up, update ifindex, set mode, etc.)
from wpa_driver_nl80211_init() need to be run again.

This is the changes from commit 3fbda8f943
(driver_wext.c) ported for driver_nl80211.c.
2008-08-15 17:55:16 +03:00
Jouni Malinen
0a4e6cbf88 nl80211: Fixed set_mode() to actually use adhoc/station nl80211 variables 2008-08-15 17:52:37 +03:00
Dan Williams
93ef879f0f wext: fix maxrate calculation
When scan results got moved from wpa_scan_result -> wpa_scan_res, the
'maxrate' member was dropped from wpa_scan_res.  The D-Bus interface
used 'maxrate', which was replaced with wpa_scan_get_max_rate().
Unfortunately, wpa_scan_get_max_rate() returns 802.11 rate values
directly from the IE, where 'maxrate' was the rate in bits/second.  The
supplicant internally fakes an IE for wpa_scan_res from the value of
wpa_scan_result->maxrate, but interprets ->maxrate as an 802.11 rate
index.

As a side-effect, this fixes a soft-break of the D-Bus control API since
the wpa_scan_res change was introduced.
2008-07-15 20:07:50 +03:00
Jouni Malinen
3f5285e852 Added a preliminary nl80211/cfg80211 driver interface for wpa_supplicant
driver_nl80211.c is based on driver_wext.c and it is still using Linux
wireless extensions for many functions. Over time, the new driver interface
code should be modified to use nl80211/cfg80211 for everything.
2008-06-06 16:55:42 +03:00