Commit graph

452 commits

Author SHA1 Message Date
Johannes Berg
05a8d4221d nl80211: Pass station VHT capabilities to kernel
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-01-12 17:51:52 +02:00
Johannes Berg
89b800d726 nl80211: Support VHT configuration
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-12 17:51:52 +02:00
Jouni Malinen
708bc8e0e4 nl80211: Restore previous nlmode if set_freq for AP mode fails
wpa_driver_nl80211_ap() returned error if set_freq failed, but left the
previously set nlmode to GO/AP. While this should not be issue for most
purposes, it leaves the interface in somewhat unexpected state and could
potentially affect operations prior to next connection attempt. Address
this by restoring the previous nlmode if AP mode cannot be started for
some reason.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-08 00:34:08 +02:00
Sven Eckelmann
a5e1eb2092 nl80211: Run TKIP countermeasures in correct hostapd_data context
hostapd can run with different VIF when using nl80211. Events about MIC
failures have to be processed in context of the VIF which received it
and not in context of the primary VIF. Otherwise the station belonging
to this VIF may not be found in the primary VIF station hash and
therefore no countermeasures are started or the countermeasures are
started for the wrong VIF.

Signed-hostap: Sven Eckelmann <sven@open-mesh.com>
Signed-hostap: Simon Wunderlich <simon@open-mesh.com>
2012-12-22 16:19:52 +02:00
Vladimir Kondratiev
7829894c21 Introduce 60 GHz band
Basic support for the 60 GHz band. Neither P2P nor WPS are yet taken
care off. Allows to start AP with very simple config:

network={
        ssid="test"
        mode=2
        frequency=60480
        key_mgmt=NONE
}

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-18 11:50:35 +02:00
Jouni Malinen
bd896433af nl80211: Register to process WNM-Sleep Mode Response frames
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-12-16 12:42:26 +02:00
Amitkumar Karwar
368b1957a6 Allow OBSS scan and 20/40 coex reports to non-SME drivers
We enable this feature for non-SME drivers as well if
they explicitly indicate need for it.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
2012-11-24 18:08:48 +02:00
Jouni Malinen
6201b052c8 nl80211: Add support for TDLS request event from the driver
The NL80211_CMD_TDLS_OPER command can be used as an event based on a
recent cfg80211 commit, so add code to map that to internal
wpa_supplicant event to request TDLS link setup/teardown.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-19 17:00:07 +02:00
Jouni Malinen
1ce0aa044c Remove unused disassociate() driver_ops
Commits 07783eaaa0 and
3da372fae8 removed the only users of the
disassociate() driver operation, so these driver wrapper functions can
also be removed now.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-11-15 00:06:12 +02:00
Jouni Malinen
9d7a63dc20 nl80211: Avoid strict-aliasing warning with gcc 4.7
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-11 20:28:27 +02:00
Christopher Wiley
a8c5b43ad3 nl80211: Roam correctly through cfg80211 without SME
Change the nl80211 driver in wpa_supplicant to correctly handle
connecting to a new AP through cfg80211 without SME capability. As
before, the driver will disconnect from the previously associated AP,
but now we attempt to immediately connect to our intended AP. This
prevents us from blacklisting the AP we were trying to connect to
because of a semantic mismatch between cfg80211 and wpa_supplicant. The
disconnect/connect patch generates a local disconnect nl80211 event
which we discard because we're already correctly tracking the pending
association request.

In detail:

cfg80211 does not support connecting to a new BSS while already
connected to another BSS, if the underlying driver doesn't support
separate authenticate and associate commands. wpa_supplicant is written
to expect that this is a supported operation, except for a little error
handling that disconnects from the current BSS when roaming fails and
relies on autoconnect logic to reconnect later. However, this failure to
connect is incorrectly attributed to the new AP we attempted to
associate with, rather than a local condition in cfg80211.

The combined effect of these two conditions is that full-mac drivers
accessible through cfg80211 but without SME capability take a long time
to roam across BSS's because wpa_supplicant will:
1) Fail to associate for local reasons
2) Disconnect and return that the association request failed
3) Blacklist the association target (incorrectly)
4) Do a scan
5) Pick a less desirable AP to associate with

Signed-hostap: Christoper Wiley <wiley@chromium.org>
2012-11-11 16:15:29 +02:00
Jouni Malinen
7d81932d27 nl80211: Make debug log more readable for driver events
Print the full name of the nl80211 event message in the debug log to
make it easier to parse the debug log.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-11-03 13:54:43 +02:00
Jouni Malinen
569fed9045 nl80211: Add support for SAE operations
This uses the recent cfg80211 changes to allow SAE authentication to be
implemented with the nl80211 driver interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-10-24 09:10:42 +03:00
Jouni Malinen
369c8d7bcd Reserve AKM and cipher suite values
These values are used with WAPI and CCX and reserving the definitions
here reduces the number of merge conflicts with repositories that
include these functions.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-30 20:26:55 +03:00
Mykyta Iziumtsev
817762d9c4 nl80211: Don't send BSSID with disconnect command
NL80211_CMD_DISCONNECT doesn't need BSSID, because cfg80211
uses locally saved value.

Signed-hostap: Mykyta Iziumtsev <mykyta.iziumtsev@gmail.com>
2012-09-29 19:01:50 +03:00
Felix Fietkau
73a3c6ffca nl80211: Use the monitor interface if socket tx status is not supported
Fixes hostapd on recent compat-wireless builds with older kernels.

Signed-hostap: Felix Fietkau <nbd@openwrt.org>
2012-09-23 13:28:31 +03:00
Felix Fietkau
92d521d89c hostapd: Send EAPOL frames from the VO queue if WMM is active
This avoids extra latency caused by establishing an aggregation session
and makes the initial connection attempt more reliable

Signed-hostap: Felix Fietkau <nbd@openwrt.org>
2012-09-15 22:40:00 -07:00
Felix Fietkau
c34e618d47 hostapd: Fix WDS VLAN bridge handling
This patch fixes an issue where removing a WDS VLAN interface also
removed the main AP interface from the same bridge.

Signed-hostap: Felix Fietkau <nbd@openwrt.org>
2012-09-15 22:38:14 -07:00
Jouni Malinen
d732463c47 nl80211: Register read_sta_data() handler for station only builds
This driver_op can now be used in station mode, too, to fetch
information about the connection with the AP, so allow this to be used
even if wpa_supplicant is built without AP mode support.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-05 17:07:03 +03:00
Yuhao Zheng
dc7785f845 wpa_supplicant: Add PKTCNT_POLL command to get TX/RX packet counters
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-09-05 17:02:02 +03:00
Jouni Malinen
eb7719ff22 Add support for using GCMP cipher from IEEE 802.11ad
This allows both hostapd and wpa_supplicant to be used to derive and
configure keys for GCMP. This is quite similar to CCMP key
configuration, but a different cipher suite and somewhat different rules
are used in cipher selection. It should be noted that GCMP is not
included in default parameters at least for now, so explicit
pairwise/group configuration is needed to enable it. This may change in
the future to allow GCMP to be selected automatically in cases where
CCMP could have been used.

This commit does not included changes to WPS or P2P to allow GCMP to be
used.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-29 11:52:15 +03:00
Wei-Jen Lin
e3e234fa35 nl80211: Set P2P multichan concurrency based on interface combinations
Use the NL80211_IFACE_COMB_NUM_CHANNELS value > 1 as a trigger for
enabling support for P2P multichannel channel concurrency. This does not
handle all possible details of enforcing driver capabilities, but it is
a good first step for allowing nl80211 drivers to enable multichannel
concurrency.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-28 19:31:58 +03:00
Jouni Malinen
75227f3ada nl80211: Print an error if WDS STA interface cannot be set up
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 18:28:55 +03:00
Jouni Malinen
067ffa2696 Convert os_realloc() for an array to use os_realloc_array()
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 21:21:23 +03:00
Jouni Malinen
f9884c096a Convert os_zalloc() for an array to use os_calloc()
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 20:44:21 +03:00
Jouni Malinen
1d0c6fb1eb nl80211: Fix re-enabling of 802.11b rates after P2P use
Commit a11241fa11 removed the 802.11b rate
enabling/disabling code from wpa_driver_nl80211_set_mode() and while
doing that, removed the only place where drv->disabled_11b_rates was
set. Fix this by updating the flag in nl80211_disable_11b_rates(). In
addition, re-enable the 802.11b rates when changing to non-P2P mode.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-10 11:48:57 +03:00
Rajkumar Manoharan
edb9bfba89 nl80211: Disable 11b rates on configuring P2P interface
Right now 11b rates are masked out while creating a P2P interface,
but this is always failing as the interface is down. Most drivers
allow to configure rates only when the interface is UP and running.
So let us disable 11b rates when interface type is changed into a
P2P type and it is UP and running.

Signed-hostap: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
2012-08-10 11:35:33 +03:00
Jouni Malinen
df2f9ec6b2 nl80211: Add nla_put_u32() wrapper for Android
The system/core/libnl_2 re-implementation in AOSP does not include
nla_put_u32().

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-09 18:45:39 +03:00
Jouni Malinen
95ac3bf49f nl80211: Share common function for scan parameters
trigger_scan and start_sched_scan can share code for building the
common attributes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 17:48:52 +03:00
Jouni Malinen
f0494d0f95 nl80211: Check nla_put_nested() return value and handle errors
Couple of functions did not verify that nla_put_nested() succeeded. Fix
these by checking the return value and handling error cases cleanly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 17:27:55 +03:00
Jouni Malinen
6afbc3d698 nl80211: Fix netlink error paths in sched_scan() handler
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 17:11:08 +03:00
Paul Stewart
21270bb4b3 Fix a couple memory leaks
Found using valgrind.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2012-08-04 20:10:08 +03:00
Jouni Malinen
e509167495 Add new drv_flag for indicating user space AP MLME
This makes it easier for hostapd to determine at runtime which
operations to use.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-01 10:34:35 +03:00
Thomas Pedersen
bf8d6d2430 nl80211: Support setting sched scan RSSI threshold
Allow the user to configure an RSSI threshold in dBm below which the
nl80211 driver won't report scan results. Currently only supported
during scheduled (PNO) scans.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-07-25 16:56:43 +03:00
Mahesh Palivela
990933fb1d nl80211: Save VHT capabilities from the driver
Save VHT capabilities coming through nl80211 within hostapd.

Signed-hostap: Mahesh Palivela <maheshp@posedge.com>
2012-07-04 21:42:56 +03:00
Thomas Pedersen
1b487b8b1e nl80211: Handle CH_SWITCH event
Some drivers may independently decide to switch channels. Handle this by
updating the hostapd and wpa_supplicant AP and GO configuration.

Signed-hostap: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
2012-06-25 14:45:14 +03:00
Johannes Berg
cad0f50e02 nl80211: Simplify cbmsg buffer
The control message received from the kernel needs some space, but
there's no need for the strange typing that breaks clang compilation.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-06-23 20:37:09 +03:00
Johannes Berg
24b5bd8b42 nl80211: Use safe list iteration
In certain cases like PBC session overlap it appears to be possible that
an interface is removed due to an event handled on it, this leads to
list corruption. Use safe iteration to prevent this issue.

Reported-by: Nirav Shah <nirav.j2.shah@intel.com>
Reported-by: Neeraj Kumar Garg <neerajkg@broadcom.com>
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
intended-for: hostap-1
2012-06-04 20:25:11 +03:00
Jouni Malinen
b5671498bf nl80211: Use wait_time with AP mode driver SME for offchannel
When sending an offchannel frame (mainly, P2P Invitation Request), the
wait_time parameter was hardcoded to 0 for drivers that implement AP
mode SME. This is not correct and can cause problems for drivers that
support offloading of off-channel operations with driver/firmware based
AP SME.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-11 18:24:31 +03:00
Jouni Malinen
2e3e456623 nl80211: Add more debug info on NL80211_CMD_FRAME uses
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-11 18:22:53 +03:00
Jithu Jance
d3bd0f057c nl80211: Extend shared_freq to handle AP/GO mode interfaces
Signed-hostap: Jithu Jance <jithu@broadcom.com>
2012-04-08 20:44:05 +03:00
Jouni Malinen
873d0fcfd3 nl80211: Skip set_mode event subscription during deinit
There is no need to subscribe to event messages during deinit process,
so skip this to avoid unnecessary operations and to keep the debug logs
a bit cleaner.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-06 18:58:44 +03:00
Jouni Malinen
2e9f078c8d nl80211: Indicate disconnect event as deauthentication
This was previously indicated as disassociation, but the P2P group
session ending case expect a deauthentication notification. Since the
cfg80211 disconnection event does not really indicate which frame was
used, the easiest approach for now seems to be to just indicate these
as deauthentication events.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-03 17:11:22 +03:00
Eliad Peller
3c29244eb7 P2P: Add deinit_p2p_cli op to clear P2P client driver state
On P2P group removal, the GO is deinitialized correctly (and the vif
mode is set back to sta in case of nl80211), but the P2P client mode
wasn't deinitialized, and the nl80211 vif stays in P2P client mode.

Add a new deinit_p2p_cli op (similar to deinit_ap), which currently only
sets the interface back to station mode.

Signed-hostap: Eliad Peller <eliad@wizery.com>
intended-for: hostap-1
2012-04-01 21:41:23 +03:00
Johannes Berg
baf513d695 Pass signal strength through, fix units
The signal strength is currently never used as the only driver reporting
it is nl80211 which uses IEEE80211_RADIOTAP_DB_ANTSIGNAL which is never
populated by the kernel. The kernel will (soon) populate
IEEE80211_RADIOTAP_DBM_ANTSIGNAL instead though, so use that.

Also, since it was never really populated, we can redefine the signal
field to be in dBm units only.

My next patch will also require knowing the signal strength of probe
requests throughout the code (where available), so add it to the
necessary APIs.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 18:48:12 +03:00
Johannes Berg
da873dbb06 nl80211: Report signal strength from nl80211
Report signal strength from nl80211 events to the higher layers.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 12:39:33 +03:00
Bala Shanmugam
1f6c0ab872 Allow background scan period to be configured
A network block specific background scan period can now be configured
for drivers that implement internal background scan mechanism for
roaming and BSS selection.

Signed-hostap: Bala Shanmugam <bkamatch@qca.qualcomm.com>
2012-03-30 15:20:35 +03:00
Vasanthakumar Thiagarajan
a0133ee1c9 nl80211: Make use of driver's capability to detect inactive stations
When drivers advertise their capability to free up inactive
stations based on ap_max_inactivity, send the inactivity period
timeout to driver in NL80211_ATTR_INACTIVITY_TIMEOUT. This
introduces a WPA_DRIVER_FLAGS (WPA_DRIVER_FLAGS_INACTIVITY_TIMER)
so that the inactivity period will be sent only when this capability
bit is set.

Signed-hostap: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
2012-03-27 20:49:44 +03:00
Aarthi Thiruvengadam
e1bd4e1934 nl80211: Fix deauth/disassoc for AP mode SME-in-driver case
When the driver (or firmware) implements AP mode SME, the use of raw
management frame TX functions is not working properly at the moment. As
an initial step, convert these AP mode operations to use
NL80211_CMD_DEL_STATION and do not claim that driver provides TX status
for deauth/disassoc frames. While this does not address all use cases
(e.g., reason code is not specified in the command), this fixes number
of issues where the station does not get disconnected properly.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-14 14:06:06 -10:00
Jouni Malinen
d1f4942ba1 nl80211: Filter unexpected interface added/up events
It looks like a RTM_NEWLINK event claiming the interface to be UP is
delivered just before removing an interface after having first indicated
that the interface was going down/removed. Ignore this event if the
interface is not present anymore at the moment the event is processed.
This fixes issues where an interface that was re-added after being
removed did not get reconfigured properly.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-02-18 13:13:23 +02:00