Commit graph

5079 commits

Author SHA1 Message Date
Jouni Malinen
4033935dd9 Fix OKC-based PMKSA cache entry clearing
Commit c3fea27274 added a call to clear
all other PMKSA cache entries for the same network if the PMKSA cache
entry of the current AP changed. This was needed to fix OKC cases since
the other APs would likely use the new PMK in the future. However, this
ended up clearing entries in cases where that is not desired and this
resulted in needing additional full EAP authentication with networks
that did not support OKC if wpa_supplicant was configured to try to use
it.

Make PMKSA cache entry flushing more limited so that the other entries
are removed only if they used the old PMK that was replaced for the
current AP and only if that PMK had previously been used successfully
(i.e., opportunistic flag was already cleared back to 0 in
wpa_supplicant_key_neg_complete()). This is still enough to fix the
issue described in that older commit while not causing problems for
standard PMKSA caching operations even if OKC is enabled in
wpa_supplicant configuration.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-22 13:24:30 +03:00
Jouni Malinen
1045ec36a3 nl80211: Add couple of additional iftypes to debug prints
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-21 16:51:06 +03:00
Sunil Dutt
2cadc8e1e5 TDLS: Retry TDLS Setup Response more quickly
TDLS responder STA used to retransmit the TDLS Setup Response after 5
seconds if the TDLS Setup Confirm is not received. The initiator would
have enabled the TDLS link and started transmitting the data to the peer
on the TDLS link after transmitting the TDLS Setup Confirm frame. If the
TDLS Setup Confirm frame is not received by the receiver, the
transmissions from the initiator on the direct link would get failed for
the TDLS link not getting enabled on the receiver. This commit reduces
the data delivery failure duration by shortening the retry time of the
TDLS Setup Response frames. The retry limit of the TDLS Response frame
also is increased to ensure that the peer does not miss the frames in
the reduced time period.

Signed-hostap: Sunil Dutt <duttus@codeaurora.org>
2013-05-20 21:30:27 +03:00
Kyeyoon Park
d5b559b641 WNM: Add disassociation timeout processing for ESS_DISASSOC
The hostapd_cli ess_disassoc command now takes three arguments (STA MAC
address, timeout in ms, URL) and the STA is disconnected after the
specified timeout.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:13:40 +03:00
Jouni Malinen
f65f539d9a GAS: Reduce query timeout to two seconds
The five second timeout for GAS queries is excessive and can result in
long waits in cases where APs are either misconfigured or frames are
lost.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:09:34 +03:00
Jouni Malinen
7a56af545a GAS: Assign new dialog token even if previous one is free
This makes the design more robust against unexpected duplicates since
each new GAS exchange gets a different dialog token compared to the
previous one.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:09:16 +03:00
Jouni Malinen
9e1ecab1c5 GAS: Ignore replays if previous frag_id without dropping GAS session
It looks like it may be possible for an older GAS response to get retransmitted
even after the first copy has been processed. While this should not really come
up all the way to wpa_supplicant due to sequence number being same (i.e.,
duplicate detection should from the frame), some cases have been observed where
this did cause issues. Drop such a frame silently without dropping the ongoing
GAS session to allow a frame with the next frag_id to be processed after this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:08:47 +03:00
Jouni Malinen
fa7ae9501b Add test code for fetching the last configured GTK
This can be useful for some test cases, so allow wpa_supplicant to be
built with special test functionality to expose the current (last
configured) GTK. This is disabled by default and can be enabled by
adding following line into .config:
CFLAGS += -DCONFIG_TESTING_GET_GTK

The GTK can then be fetched with "wpa_cli get gtk".

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-20 11:00:56 +03:00
Jouni Malinen
576bce9c86 P2P: Direct global ctrl_iface commands automatically for P2P
The P2P management operations like P2P_FIND and P2P_CONNECT are not
really specific to any network interface. These are P2P Device level
operations that are in more global device context. Allow those to be
sent through the global control interface without IFNAME parameter.

For now, these commands are directed within wpa_supplicant to the
network interface that initialized the global P2P context. This may
change in the future if a special context is added for P2P operations.
Anyway, such changes can now be done internally within wpa_supplicant
without affecting this global control interface design from external
view point.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 19:41:08 +03:00
Jouni Malinen
c4bf83a723 P2P: No duplicate AP-STA-CONNECTED/DISCONNECTED as global event
These events are sent as a special case to both the group interface and
"parent interface" (i.e., the interface that was used for managing P2P
negotiation). The latter is not really correct event, so get rid of it
with the new global control interface design where there is no need to
support legacy upper layer implementations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 19:18:31 +03:00
Jouni Malinen
7793c959e6 Clean up AP-STA-CONNECTED/DISCONNECTED prints
Use shared code to print the parameters so that they do not need to be
generated four times separately.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 19:09:41 +03:00
Jouni Malinen
92c4465b75 P2P: Mark P2P events global (not specific to interface)
This removes the "IFNAME=<ifname> " prefix from P2P events that are
received through the global control interface since these events are not
really specific to any network interface, but the full device.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 18:59:51 +03:00
Jouni Malinen
ed496f131f P2P: Clean up debug prints
Replace direct wpa_msg() calls with p2p_dbg(), p2p_info(), and p2p_err()
calls that use a new debug_print() callback to handle actual debug
printing outside the P2P module.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 18:47:36 +03:00
Jouni Malinen
710ae9ac1f P2P: Move p2p_find stopped event message into p2p_supplicant.c
This removes wpa_ctrl.h dependency from src/p2p/* and makes the P2P
events more consistent, i.e., everything that is aimed for upper layer
processing from the wpa_supplicant control interfaces is generated in
p2p_supplicant.c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 16:06:40 +03:00
Jouni Malinen
47bfe49c31 Add wpa_msg_global() for global events
This function can be used instead of wpa_msg() and wpa_msg_ctrl() to
indicate that an event is not specific to a network interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 14:19:24 +03:00
Jouni Malinen
214e428b42 Allow global ctrl_iface monitors
The ATTACH/DETACH mechanism to request event messages from
wpa_supplicant can now be used through the global control interface,
too. This results in events from all interfaces being delivered through
a single monitor socket. "IFNAME=<ifname> " prefix is used on events
that are specific to an interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 14:07:28 +03:00
Dmitry Shmidt
89c7ac570b wpa_cli: Set buffer length the same as in wpa_supplicant_ctrl_iface_process()
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-05-18 12:21:44 +03:00
Jouni Malinen
faf9a8585d Add band option (2.4 vs. 5) for filtering scans
This can be used to implement filtering of channels for scan and based
on that, for connection, purposes.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-18 12:17:10 +03:00
Jouni Malinen
b83b1b2da8 Android: Clarify keystore include directories
This updates hostapd to build using the new keystore header file
location and adds a note that the old frameworks/base/cmds/keystore can
be removed at some point in the future when old Android releases do not
need to be supported.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 12:03:35 +03:00
Jouni Malinen
6f1127cac6 Android: Add a top level Android.mk
This allows the hostap.git repository version to be build as part of the
full Android platform build.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 11:55:32 +03:00
Jouni Malinen
d2a9e2c76d Abstract and Android sockets for global ctrl_iface
The wpa_supplicant global control interface parameter can now be used to
explicitly specify an abstract UNIX domain socket (Linux specific
extension) with "@abstract:" prefix and an Android control socket with
"@android:" prefix.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 11:42:09 +03:00
Jouni Malinen
6fd5ceaf70 wpa_cli: Allow global interface to be used in interactive mode
This is mostly a corner case at this point, but if wpa_cli was started
with global control interface connection (-g) and interactive mode,
per-interface control interface was tried to be opened with the
previously opened global ctrl_iface connection gettign leaked.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 11:40:23 +03:00
Jouni Malinen
2925756575 wpa_supplicant: Add -G argument to specify global ctrl group
The optional -G<group> command line argument can be used to specify the
group that can access the global control interface.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 11:00:05 +03:00
Jouni Malinen
cf3bebf28c Allow global ctrl_iface to be used for per-interface commands
"IFNAME=<ifname> " prefix can now be used on the wpa_supplicant global
control interface to direct a command to a specific interface instead of
having to use an interface specific control interface for this. This
allows a single socket to be used for controlling multiple virtual
interfaces.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 10:19:38 +03:00
Jouni Malinen
058c8636a7 FT RRB: Fix a memory leak on error path
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-18 09:49:26 +03:00
Suryadevara Sudheer
c6ccf12d3f P2P: Use preferred channel list during GO creation
This extends support for p2p_pref_Chan configuration parameter for
autonomous GO creation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-17 11:27:02 +03:00
Suryadevara Sudheer
6d956c4064 P2P: Re-select channel in invitation case with peer info
Allow invitation exchange to update operating channel selection after
peer channel list has been received similarly to how GO negotiation was
handled.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-17 11:18:02 +03:00
Yufeng Wang
010b5f9bfc P2P: Fix p2p_pref_chan setting from configuration file
Commit 21d996f775 added p2p_pref_chan as a
configuration file parameter, but included only the case of dynamically
setting this at runtime through the control interface SET command.
Complete this functionality by taking this value into use directly from
the configuration file, too.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-17 11:03:52 +03:00
Daniel Gnoutcheff
d7692b8d1c dbus: Terminate cleanly on messagebus shutdown
By default, dbus_connection_dispatch() will call _exit() if the bus
connection has been closed. This caused wpa_supplicant to terminate
without properly cleaning up after itself.

To ensure that we terminate cleanly when the messagebus terminates,
override the exit_on_disconnect behavior and install a filter to handle
libdbus's "Disconnected" signal.

[Bug 474]

Signed-hostap: Daniel Gnoutcheff <daniel@gnoutcheff.name>
2013-05-16 20:47:28 +03:00
Vinayak Kamath
e2396a684e WNM: Enable CONFIG_WNM in Android.mk
Signed-hostap: Vinayak Kamath <vkamat@codeaurora.org>
2013-05-16 17:51:18 +03:00
Vinayak Kamath
65bcd0a92d WNM: Add sending of BSS Transition Management Query
The new control interface command can be used to send a
BSS Transition Management Query frame to the current AP.

Signed-hostap: Vinayak Kamath <vkamat@codeaurora.org>
2013-05-16 17:50:31 +03:00
Vinayak Kamath
e27d20bb68 WNM: Add neighbor report processing for BSS Transition Management
Process the neighbor report received in BSS Management Request frames.

Signed-hostap: Vinayak Kamath <vkamat@codeaurora.org>
2013-05-16 17:48:59 +03:00
Jouni Malinen
f3e907a745 WPS: Clear connection failure counts on WPS success
The WPS provisioning case does not result in successful connection by
design and as such, this can result in networks getting temporarily
disabled. Avoid this by clearing the failure counts on WPS success.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-15 17:33:50 +03:00
Jouni Malinen
170f5663dc WPS NFC: Connect using learnt credential after NFC Tag read
Instead of just adding the new network, prefer the network learnt from a
configuration token during the first connection attempt. This makes the
WPS NFC case behave similarly to the in-band provisioning cases if there
are more preferred networks in the scan results.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-15 16:46:45 +03:00
Jouni Malinen
0af2db7478 edit: Fix libreadline history clearing with WPA_TRACE
The HIST_ENTRY and its variables are allocated within libreadline, so
they won't have the WPA_TRACE special header and cannot be freed with
os_free(). Use free() to avoid issues during wpa_cli termination if any
of the new commands added to the history are to be removed (e.g.,
set_network could include a password).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-14 16:46:38 +03:00
Jouni Malinen
455299fb40 nl80211: Fix foreign address filtering for MLME frame events
Commit 97279d8d1a started filtering MLME
frame events based on Address 1 (destination) field. This works fine for
frames sent to us, but it did filter out some corner cases where we
actually want to process an event based on a frame sent by us. The main
such case is deauthentication or disassociation triggered by something
external to wpa_supplicant in the system. Fix this by accepting events
for frames where either Address 1 or 2 (transmitter) matches the
interface address.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-13 11:53:21 +03:00
Jouni Malinen
53aafe75e0 wpadebug: Add broadcast intent receiver for Wi-Fi events
This makes it easier to debug Android framework actions with all the
related broadcast intents being logged.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-12 21:06:59 +03:00
Jouni Malinen
e679f140b9 Mark interface disconnected on removal request
This cleans up debug log by not trying to process the disconnection
event as a failure that could result in blacklist addition and auto
connect attempt. These are pointless operations since the interface is
going to removed immediately after this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-12 19:18:55 +03:00
Jouni Malinen
3636b891b7 Do not try auto connect mechanism in disconnected state
This cleans up debug log by not requesting the auto connect on
dissassociation event if we are already in disconnected state and would
not try to connect anyway.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-12 19:18:55 +03:00
Jouni Malinen
0cdb93fe9f Do not add BSS to blacklist on local disconnection request
There is no point in marking a BSS temporarily blacklisted based on a
connection failure or disconnection case if that happens as a result of
a local request to disconnect. The blacklist entry could result on
unexpected BSS getting selected on the next connection attempt. In
addition, the code to try to find another BSS within the ESS could
result in scanning a single channel on the next attempt. Fix these
issues by handling the connection failure events only if we are not in
disconnected state (i.e., would try to reconnect after this
automatically).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-12 19:18:55 +03:00
Jouni Malinen
0db66360d8 wpadebug: Add a simple WebView activity
This provides a simple web browser that can be started and stopped from
other apps or native applications.

This activity can be started with the following command:
am start -a android.action.MAIN -c android.intent.category.LAUNCHER \
    -n w1.fi.wpadebug/.WpaWebViewActivity -e w1.fi.wpadebug.URL <URL>

If <URL> is set to FINISH the activity is finished.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-12 19:18:55 +03:00
Jouni Malinen
280cd8a9a2 tests: Allow hwsim_test and wlantest_cli to be used from PATH
This makes it easier to support some test environments where the
repository is shared between hosts.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-11 11:34:49 +03:00
Jouni Malinen
4ee18c9207 wpadebug: Add forgotten installation step to documentation
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-11 11:32:03 +03:00
Jouni Malinen
8c87f65f32 tests: Use /var/run/hostapd-global to avoid socket file in work dir
This makes some cases more convenient with read-only file systems.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-10 17:09:55 +03:00
Deepthi Gowri
36b9883d84 Defer scan if connection is in progress on any of the shared interfaces
Scanning can delay concurrent operations considerably, so it is better
to avoid that while trying to connect on any of the virtual interfaces
that share the same radio.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-05-10 16:10:50 +03:00
Paul Stewart
7c0e1e2757 tls_openssl: Store TLS context per-connection
Store context for each tls_init() caller, so events are generated for
the correct wpa_s instance. The tls_global variable is retained for
older OpenSSL implementations that may not have app-data for SSL_CTX.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-05-10 00:22:08 +03:00
Simon Wunderlich
732118eca3 Rename hostapd_parse_rates() to a more generic int list parser
This can be used with other integer lists than just rates.

Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2013-05-09 20:27:47 +03:00
Simon Wunderlich
b113a171ac DFS: Add ieee80211h hostapd configuration parameter
This patch is based on the original work by Boris Presman and
Victor Goldenshtein. Channel Switch Announcement support has been
removed and event handling as well as channel set handling was
changed, among various other changes.

Cc: Boris Presman <boris.presman@ti.com>
Cc: Victor Goldenshtein <victorg@ti.com>
Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2013-05-09 20:14:53 +03:00
Simon Wunderlich
695c70381f nl80211: Add driver_ops for stopping AP beaconing
This can be used to stop AP mode beaconing temporarily, e.g., in
response to a radar detected event.

This patch is based on the original work by Boris Presman and
Victor Goldenshtein. Channel Switch Announcement support has been
removed and event handling as well as channel set handling was
changed, among various other changes.

Cc: Boris Presman <boris.presman@ti.com>
Cc: Victor Goldenshtein <victorg@ti.com>
Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2013-05-09 20:06:33 +03:00
Simon Wunderlich
f90e9c1c8b nl80211: Add driver_ops for starting radar detection
This patch is based on the original work by Boris Presman and
Victor Goldenshtein. Channel Switch Announcement support has been
removed and event handling as well as channel set handling was
changed, among various other changes.

Cc: Boris Presman <boris.presman@ti.com>
Cc: Victor Goldenshtein <victorg@ti.com>
Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2013-05-09 20:05:01 +03:00