Commit graph

1025 commits

Author SHA1 Message Date
Jouni Malinen
25ebd538a4 Drop support for libnl 1.1
This simplifies code by not having to maintain and come up with new
backwards compatibility wrappers for a library release from 12 years
ago.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-01-02 18:05:38 +02:00
Matteo Croce
82ba4f2d1b nl80211: Add a driver ops function to check WoWLAN status
Add function that returns whether WoWLAN has been enabled for the device
or not.

Signed-off-by: Alfonso Sanchez-Beato <alfonso.sanchez-beato@canonical.com>
2019-12-30 18:46:29 +02:00
Michal Kazior
8e111157e7 nl80211: Relax bridge setup
Normally nl80211 driver will attempt to strictly control what bridge
given interface is put in. It'll attempt to remove it from an existing
bridge if it doesn't match the configured one. If it's not in a bridge
it'll try to put it into one. If any of this fails then hostapd will
bail out and not set up the BSS at all.

Arguably that's reasonable since it allows to set the BSS up coherently
with regard to EAPOL handling as well as allows extra interactions with
things like FDB. However, not all hostapd drivers interact with bridge=
the same way. One example is atheros. Therefore it's not clear what the
desired behavior should be if consistency across drivers is considered.

There's a case where one might want to use a non-native Linux bridge,
e.g., openvswitch, in which case regular ioctls won't work to put an
interface into a bridge, or figure out what bridge an interface is in.
The underlying wireless driver can still be an ordinary nl80211 driver.

This change relaxes the bridge setup failure so that hostapd still
starts even if it fails to add an interface into a configured bridge
name. It still sets up all the necessary sockets (including the
configured bridge=) so EAPOL handling should work fine. This then leaves
it to the system integrator to manage wireless interface as bridge ports
and possibly fdb hints too.

Signed-off-by: Michal Kazior <michal@plume.com>
2019-12-24 21:16:23 +02:00
Jouni Malinen
1730a6a5ef nl80211: Fix couple of typos in a comment
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-23 10:24:49 +02:00
Ankita Bajaj
e86ba912aa ACS: Remove redundant ch_list parameters from do_acs interface
Clean up do_acs interface to not pass ch_list to drivers as the same
information is available in freq_list. The channel numbers are
duplicated between 2.4 GHz and 5 GHz bands and the 6 GHz band. So, use
the QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST to populate only 2.4 GHz and 5 GHz
channels to ensure backwards compatibility with old drivers which do not
have support to decode the newer QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST
attribute.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-05 18:02:34 +02:00
Shiva Sankar Gajula
df3b2e22a0 nl80211: Add STA node details in AP through QCA vendor subcommand
Addi STA node details in AP through QCA vendor subcommand
QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE vendor when processing FT
protocol roaming.

Signed-off-by: Shiva Sankar Gajula <sgajula@codeaurora.org>
2019-10-25 19:29:53 +03:00
Sunil Dutt
1317ea2c0e nl80211: Allow external auth based on SAE/FT-SAE key mgmt
In the SME-in-driver case, wpa_supplicant used only the selected SAE
auth_alg value as the trigger for enabling external authentication
support for SAE. This prevented the driver from falling back to full SAE
authentication if PMKSA caching was attempted (Open auth_alg selected)
and the cached PMKID had been dropped.

Enable external auth based on SAE/FT-SAE key_mgmt, rather than doing
this based on SAE auth_alg, so that the driver can go through full SAE
authentication in cases where PMKSA caching is attempted and it fails.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Alexei Avshalom Lazar
dda5d9e315 nl80211: Add support for EDMG channels
IEEE P802.11ay defines Enhanced Directional Multi-Gigabit (EDMG) STA and
AP which allow channel bonding of 2 channels and more.

nl80211 provides the driver's EDMG capabilities from the kernel
using two new attributes:
NL80211_BAND_ATTR_EDMG_CHANNELS - bitmap field that indicates the 2.16
GHz channel(s) that are supported by the driver.
NL80211_BAND_ATTR_EDMG_BW_CONFIG - represents the channel bandwidth
configurations supported by the driver.
The driver's EDMG capabilities are stored inside struct hostapd_hw_modes.

As part of the connect request and starting AP, EDMG parameters are
passed as part of struct hostapd_freq_params.

The EDMG parameters are sent to the kernel by using two new attributes:
NL80211_ATTR_WIPHY_EDMG_CHANNEL and NL80211_ATTR_WIPHY_EDMG_BW_CONFIG
which specify channel and bandwidth configuration for the driver to use.

This implementation is limited to CB2 (channel bonding of 2 channels)
and the bonded channels must be adjacent.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:06:04 +03:00
Alexander Wetzel
83b83b461d nl80211: Migrate to current netlink key message format
Linux 2.6.32 (December 2009) introduced alternate netlink messages
for setting and installing keys, deprecating the older ones.

To allow hostapd/wpa_supplicant to use new features only provided via
the new API this patch migrates all netlink messages to the current ones.

Since the nl80211 driver was sometimes already using the new format this
is only unifying the netlink API usage and not changing the minimal
kernel requirement.

The following netlink attributes have been retired for key installs:

  NL80211_ATTR_KEY_DATA
  NL80211_ATTR_KEY_TYPE
  NL80211_ATTR_KEY_SEQ
  NL80211_ATTR_KEY_IDX
  NL80211_ATTR_KEY_CIPHER
  NL80211_ATTR_KEY_DEFAULT
  NL80211_ATTR_KEY_DEFAULT_MGMT
  NL80211_ATTR_KEY_DEFAULT_TYPES

And replaced by the following attributes nested in NL80211_ATTR_KEY:

  NL80211_KEY_DATA
  NL80211_KEY_TYPE
  NL80211_KEY_SEQ
  NL80211_KEY_IDX
  NL80211_KEY_CIPHER
  NL80211_KEY_DEFAULT
  NL80211_KEY_DEFAULT_MGMT
  NL80211_KEY_DEFAULT_TYPES

When getting Michael MIC failure notifications or querying a key
sequence number the kernel continues to use the old attributes:
  NL80211_ATTR_KEY_TYPE
  NL80211_ATTR_KEY_SEQ
  NL80211_ATTR_KEY_IDX

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2019-09-19 12:48:37 +03:00
John Crispin
a84bf44388 HE: Send the AP's OBSS PD settings to the kernel
This allows us to send the OBSS PD settings to the kernel, such that the
driver can propagate them to the hardware/firmware.

Signed-off-by: John Crispin <john@phrozen.org>
2019-09-10 14:00:14 +03:00
Jouni Malinen
7d2ed8bae8 Remove CONFIG_IEEE80211W build parameter
Hardcode this to be defined and remove the separate build options for
PMF since this functionality is needed with large number of newer
protocol extensions and is also something that should be enabled in all
WPA2/WPA3 networks.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-09-08 17:33:40 +03:00
Sunil Dutt
c574a3ff18 nl80211: Request update connection params only for drivers with SME
Update Connection Params is intended for drivers that implement
internal SME and expect these updated connection params from
wpa_supplicant. Do not send this request for the drivers using
SME from wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-16 15:26:18 +03:00
Sven Eckelmann
df4f959988 nl80211: Don't force VHT channel definition with HE
HE (802.11ax) is also supported on 2.4 GHz. And the 2.4 GHz band isn't
supposed to use VHT operations. Some codepaths in wpa_supplicant will
therefore not initialize the freq->bandwidth or the freq->center_freq1/2
members. As a result, the nl80211_put_freq_params() will directly return
an error (-1) or the kernel will return an error due to the invalid
channel definition.

Instead, the channel definitions should be created based on the actual
HT/VHT/none information on 2.4 GHz.

Fixes: ad9a1bfe78 ("nl80211: Share VHT channel configuration for HE")
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
2019-08-11 18:04:26 +03:00
Sunil Dutt
1425caac28 Rename qca_wlan_vendor_attr_roam_subcmd to represent subcmds
qca_wlan_vendor_attr_roam_subcmd is an enum associated with the
attribute QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD. It represents different
sub command values and these are not the attributes. Hence, rename the
enum to qca_wlan_vendor_roaming_subcmd. Accordingly, the members of this
enum are also renamed to suite the usage.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-08 18:45:08 +03:00
Arend van Spriel
cb28bd52e1 nl80211: Use separate flag for 4-way handshake offload
Commit d896874f86 ("nl80211: Indicate 802.1X 4-way handshake offload
in connect") used the req_key_mgmt_offload flag to indicate to the
driver that it should offload the 802.1X handshake. However, this field
was existing and used for a different offload API. This causes
wpa_supplicant to send a connect request without the WANT_1X_HS flag and
the subsequent set-pmk is rejected causing the connection to fail. Fix
that by introducing a new flag req_handshake_offload so the offloads are
no longer entangled.

Fixes: d896874f86 ("nl80211: Indicate 802.1X 4-way handshake offload in connect")
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
2019-08-01 15:52:48 +03:00
Brian Norris
3b726df827 nl80211: Missing sysctl flags aren't fatal
The relevant flags were only added in Linux 4.6, so we shouldn't
complain because they're missing. Also, they're always missing if a
device is being removed (e.g., 'iw dev wlan0 del', or if the device is
in the process of resetting itself). So kill those 2 birds with 1 stone:
if we can't find the file, just silently skip it.

Also, we probably should *actually* propagate the error if we had a
write failure.

Signed-off-by: Brian Norris <briannorris@chromium.org>
2019-07-30 20:01:13 +03:00
Sunil Dutt
968520da8f nl80211: Add WMM parameters while updating TDLS peer entry
The AP mode fix for removing NL80211_ATTR_STA_WME from
NL80211_CMD_SET_STATION did not consider the TDLS case and that resulted
in incorrectly removing WMM parameters from TDLS STA entry updates. Fix
this by considering the WPA_STA_TDLS_PEER flag similarly to the other
update parameters.

Fixes: 6d14b98fc6 ("nl80211: Do not add WMM parameters when updating an existing STA entry")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-07-26 15:42:22 +03:00
Liangwei Dong
d1836e2308 nl80211: Introduce the interface to update new DH IE
This command/event interface can be used by SME based host drivers that
rely on user space (hostapd/wpa_supplicant) for DH IE
processing/generation. This interface facilitates the OWE connection
with host drivers by offloading DH IE processing to the user space
(hostapd/wpa_supplicant).

Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org>
Signed-off-by: Liangwei Dong <liangwei@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-06-14 23:10:51 +03:00
Ashok Kumar
2552a3735a SAE: Fix external_auth status in driver-SME STA case with AP SME support
A driver that uses internal AP SME may need to be able to use the
external_auth status operation in station mode, so do not skip this
solely based on drv->device_ap_sme; instead, use that condition only
when operating in AP mode.

Fix external_auth status in non SME case.

Signed-off-by: Ashok Kumar <aponnaia@codeaurora.org>
2019-05-31 16:52:15 +03:00
Pradeep Kumar Chitrapu
c36109e4d9 nl80211: Add support to probe specific mesh link by injecting frames
Add support for injecting frames to a given mesh peer, bypassing the
mpath table lookup using PROBE_MESH_LINK command. This helps to send
data frames over unexercised direct mesh path, which is not selected as
next_hop node. This can be helpful in measuring link metrics.

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
2019-05-28 14:32:23 +03:00
John Crispin
ad9a1bfe78 nl80211: Share VHT channel configuration for HE
Set operating channel bandwidth and center frequencies using the same
attributes for VHT and HE.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-27 17:03:39 +03:00
John Crispin
59d9c3a145 nl80211: Allow HE Capability to be set for a STA
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-27 16:27:41 +03:00
Toke Høiland-Jørgensen
6720b9482f nl80211: Station airtime weight configuration
This provides a mechanism for configuring per-STA airtime weight for
airtime policy configuration.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
2019-05-02 13:28:17 +03:00
Toke Høiland-Jørgensen
58d4c23615 nl80211: Fetch STA TX/RX duration statistics
This makes per-STA TX/RX duration statistics available for airtime policy
configuration.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
2019-04-30 12:34:58 +03:00
Toke Høiland-Jørgensen
1d6f63854e nl80211: Fetch STA TXQ backlog statistics
This makes per-STA TXQ backlog statistics available for airtime policy
configuration.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
2019-04-30 12:34:58 +03:00
Jouni Malinen
099224c18e nl80211: Simplify if_indices tracking
Maintain a single array (of struct with two int variables) instead of
two independent arrays (of int) for tracking know ifindexes and reasons
for having added them. The previous implementation tried to maintain two
independent arrays even though they were always required to be of
exactly same length and order. That had resulted in a bug earlier and
the code was not exactly easy to understand either, so replace this with
a single array.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-28 21:05:54 +03:00
Jouni Malinen
e6ca2f1139 nl80211: Fix handling of if_indices reallocation failure
Addition of a separate if_indices_reason array broke reallocation
failure checking. drv->if_indices or drv->if_indices_reason could not be
NULL in the place where this check was moved to. Fix that by maintaining
knowledge of reallocation failure in a separate local variable.

Fixes: 732b1d20ec ("nl80211: Clean up ifidx properly if interface in a bridge is removed")
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-28 20:52:10 +03:00
Jouni Malinen
4be17ffbd9 Replace int status/reason_code with u16 variable
These cases are for the IEEE 802.11 Status Code and Reason Code and
those fields are unsigned 16 bit values, so use the more appropriate
type consistently. This is mainly to document the uses and to make the
source code easier to understand.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-22 22:08:07 +03:00
Jouni Malinen
c8931afe24 nl80211: Check nla_put_flag() failure for ext auth
All nla_put*() operations should be verified to succeed, so check this
recently added one for NL80211_ATTR_EXTERNAL_AUTH_SUPPORT.

Fixes: 236e793e7b ("nl80211: External authentication in driver-based AP SME mode")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-18 21:55:39 +03:00
Ilan Peer
323a51cc01 nl80211: Handle NL80211_CMD_PROBE_CLIENT command response
When processing the NL80211_CMD_PROBE_CLIENT command response, the
nl80211 layer in the kernel sends a response containing the cookie
associated with the client probe request. This response was not handled
by driver_nl80211.c when sending the command, and it was mistakenly
handled as an asynchronous event. This incorrect event did not include
the MAC/ACK attributes, so it was ignored in practice, but nevertheless,
the command response should not be processed as an event.

Fix this by reading the response as part of the sending the command
flow.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2019-04-16 01:53:18 +03:00
Jouni Malinen
091c227714 nl80211: Clear bss->freq on station mode disconnection
This fixes some issues where bss->freq could have been used to replace
the current operating channel when sending out a management frame.
bss->freq has not been consistently used to track the current operating
channel in station mode, so it should not be trusted for this type of
uses. Clearing it makes this a bit more robust by at least avoiding the
cases of information from past association being used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-14 12:33:37 +03:00
Jouni Malinen
dd1a8cef4c Remove unnecessary copying of SSID and BSSID for external_auth
The external authentication command and event does not need to copy the
BSSID/SSID values into struct external_auth since those values are used
before returning from the call. Simplify this by using const u8 * to
external data instead of the array with a copy of the external data.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-12 20:43:26 +03:00
Srinivas Dasari
236e793e7b nl80211: External authentication in driver-based AP SME mode
This extends driver interface to nl80211 by introducing the following
changes,
1. Register for Authenication frames in driver-based AP SME mode.
2. Advertise NL80211_ATTR_EXTERNAL_AUTH_SUPPORT in set_ap when
   offloaded SAE authentication is supported.
3. Extend the NL80211_CMD_EXTERNAL_AUTH interface to also send PMKID
   so that the drivers can respond to the PMKSA cached connection
   attempts from the stations avoiding the need to contact user space
   for all PMKID-based connections.
4. Send external auth status to driver only if it is a driver based
   SME solution.

Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org>
2019-04-12 20:29:56 +03:00
Ankita Bajaj
005585d602 nl80211: Add SAE, FT-SAE, FT-EAP-SHA384 AKMs in connect request
This is needed for full MAC drivers that use NL80211_CMD_CONNECT
for issuing connect request.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-05 21:02:37 +03:00
Jouni Malinen
6d14b98fc6 nl80211: Do not add WMM parameters when updating an existing STA entry
In the case of the driver not supporting full AP mode STA state (i.e.,
not adding a STA entry before association), the QoS parameters are not
allowed to be modified when going through (re)association exchange for a
STA entry that has not been removed from the kernel. cfg80211 would
reject such command to update STA flags, so do not add the WMM parameter
in this case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-27 03:14:02 +02:00
vamsi krishna
4efade3157 nl80211: Clear keys from heap memory before freeing it for get_seqnum
NL80211_CMD_GET_KEY response may return the actual key in addition to
the last used sequence number that we need. That might result in a key
being left in unused heap memory after the buffer is freed.

Explicitly clear the message payload with the possibly included key
material from heap memory before returning from the handler function
(and having libnl free the nlmsg) when key information is obtained from
the driver using the NL80211_CMD_GET_KEY command.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-13 14:54:18 +02:00
vamsi krishna
c6ec9759c5 nl80211: Exclude PMK when sending NL80211_CMD_DEL_PMKSA explicitly
Add a check in nl80211 driver layer to not include PMK while sending
NL80211_CMD_DEL_PMKSA explicitly. Though it is taken care already in
supplicant layer by setting the pmk_len to zero, it would be good
to have a check in nl80211 layer in order to avoid future accidental
inclusions of keying material in commands that do not need them.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-13 13:22:40 +02:00
Jouni Malinen
bf0021ede3 Allow fragmentation/RTS threshold to be disabled explicitly
hostapd configuration parameters fragm_threshold and rts_threshold were
documented to disable the threshold with value -1 and not change driver
configuration if the parameter is not included. However, -1 was mapped
into not changing the driver value, so the explicit disabling part did
not work.

Replace the default values for these to be -2 so that explicitly set
configuration value -1 can be distinguished from the case of not
including the parameter. Map the -1 value to a driver request to disable
the threshold. Ignore any error from this operation just in case to
avoid breaking functionality should some drivers not accept the (u32) -1
value as a threshold value request to disable the mechanism.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-03-12 17:15:08 +02:00
Jouni Malinen
21cd8f8319 nl80211: Use wpa_ssid_txt() for debug messages more consistently
Print the SSID with printf escaping instead of wpa_hexdump_ascii()
format to clean up the debug log a bit. This was already done for number
of SSID debug prints.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-10 01:43:50 +02:00
Jouni Malinen
6110753b18 nl80211: Clear PMKID add command message buffer
This command has now been extended to include PMK for offload needs, so
the message buffer needs to be cleared explicitly after use to avoid
leaving such material in heap memory unnecessarily.

Fixes: 061a3d3d53 ("nl80211: Add support for FILS Cache Identifier in add/remove_pmkid()")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-05 23:34:30 +02:00
Jouni Malinen
0fa33e05b4 nl80211: Clear connect command message buffer
This command can include keys (WEP or PSK for offload), so the message
buffer needs to be cleared explicitly after use to avoid leaving such
material in heap memory unnecessarily.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-05 23:34:30 +02:00
Jouni Malinen
b14e8ea1d2 nl80211: Request kernel to trim off payload of netlink requests from acks
We do not need such payload in the acknowledgment, so adding it uses
resources unnecessarily. Furthermore, the original request can include
key material (e.g., NL80211_ATTR_PMK). libnl does not explicitly clear
this received message buffer and it would be inconvenient for
wpa_supplicant/hostapd to try to clear it with the current libnl design
where a duplicated buffer is actually passed to the callback. This means
that keys might be left unnecessarily in heap memory. Avoid this by
requesting the kernel not to copy back the request payload.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-05 23:34:30 +02:00
Arend van Spriel
d896874f86 nl80211: Indicate 802.1X 4-way handshake offload in connect
Upon issuing a connect request we need to indicate that we want the
driver to offload the 802.1X 4-way handshake for us. Indicate it if
the driver capability supports the offload.

Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
2019-01-08 01:12:02 +02:00
Arend van Spriel
436ee2fd93 drivers: Add separate driver flags for 802.1X and PSK 4-way HS offloads
Allow drivers to indicate support for offloading 4-way handshake for
either IEEE 802.1X (WPA2-Enterprise; EAP) and/or WPA/WPA2-PSK
(WPA2-Personal) by splitting the WPA_DRIVER_FLAGS_4WAY_HANDSHAKE flag
into two separate flags.

Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
2019-01-08 01:12:02 +02:00
Jouni Malinen
fea49f8f93 nl82011: Make wiphy-specific country (alpha2) available in STATUS-DRIVER
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-31 16:41:24 +02:00
Jouni Malinen
f9052d6ea5 nl80211: Note interface-removal-from-bridge errors in debug log
One of the linux_br_del_if() calls did not log nl80211-specific entry.
Make this more consistent with the other cases even though
linux_br_add_if() function itself is logging an error in the ioctl()
failure case (but not in the interface not found case).

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-31 01:05:23 +02:00
Johannes Berg
5b82cdbe8b nl80211: Add support for starting FTM responder
Add support for starting FTM responder when in AP mode. This just sends
the appropriate NEW/SET_BEACON command to the driver with the LCI/civic
location data.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-12-21 11:22:35 +02:00
Venkateswara Naralasetty
5abc7823bd wpa_supplicant: Add Multi-AP backhaul STA support
Advertise vendor specific Multi-AP IE in (Re)Association Request frames
and process Multi-AP IE from (Re)Association Response frames if the user
enables Multi-AP fuctionality. If the (Re)Association Response frame
does not contain the Multi-AP IE, disassociate.

This adds a new configuration parameter 'multi_ap_backhaul_sta' to
enable/disable Multi-AP functionality.

Enable 4-address mode after association (if the Association Response
frame contains the Multi-AP IE). Also enable the bridge in that case.
This is necessary because wpa_supplicant only enables the bridge in
wpa_drv_if_add(), which only gets called when an interface is added
through the control interface, not when it is configured from the
command line.

Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2018-12-20 12:10:31 +02:00
Mathy Vanhoef
f9da7505bf OCV: Include and verify OCI in SA Query frames
Include an OCI element in SA Query Request and Response frames if OCV
has been negotiated.

On Linux, a kernel patch is needed to let clients correctly handle SA
Query Requests that contain an OCI element. Without this patch, the
kernel will reply to the SA Query Request itself, without verifying the
included OCI. Additionally, the SA Query Response sent by the kernel
will not include an OCI element. The correct operation of the AP does
not require a kernel patch.

Without the corresponding kernel patch, SA Query Requests sent by the
client are still valid, meaning they do include an OCI element.
Note that an AP does not require any kernel patches. In other words, SA
Query frames sent and received by the AP are properly handled, even
without a kernel patch.

As a result, the kernel patch is only required to make the client properly
process and respond to a SA Query Request from the AP. Without this
patch, the client will send a SA Query Response without an OCI element,
causing the AP to silently ignore the response and eventually disconnect
the client from the network if OCV has been negotiated to be used.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 15:42:23 +02:00
Mathy Vanhoef
7f00dc6e15 Add driver API to get current channel parameters
This adds driver API functions to get the current operating channel
parameters. This encompasses the center frequency, channel bandwidth,
frequency segment 1 index (for 80+80 channels), and so on.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 18:35:30 +02:00
Jouni Malinen
bd51246924 nl80211: Debug print TX queue parameter values and result
Some mac80211_hwsim test cases have failed with mysterious sequence
where mac80211 has claimed the parameters are invalid ("wlan3: invalid
CW_min/CW_max: 9484/40"). Those values look strange since they are not
from hostapd configuration or default values.. hostapd is seeing TX
queue parameter set failing for queues 0, 1, and 3 (but not 2) for these
cases. Add debug prints to hostapd to get more details on what exactly
is happening if such error cases can be reproduced.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 19:50:59 +02:00
Cedric Izoard
10d32e2c8d nl80211: Use netlink connect socket for disconnect (ext auth)
When external authentication is used, a specific netlink socket is used
to send the connect command. If the same socket is not used for
disconnect command, cfg80211 will discard the command. This constraint
was added into the kernel in commit bad292973363 ("nl80211: Reject
disconnect commands except from conn_owner"). That requires an update
for the hostap.git commit 40a68f3384 ("nl80211: Create a netlink
socket handle for the Connect interface").

Add a new flag into struct i802_bss to indicate if the special
nl_connect socket was used for the connect command. When sending
disconnect command this flag is tested to select the correct socket.

Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
2018-11-26 19:24:31 +02:00
Emmanuel Grumbach
941807f6b6 drivers: Document struct wpa_signal_info
Add documentation to the wpa_signal_info structure.
Add a define for an invalid noise value.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2018-11-26 00:57:50 +02:00
Jouni Malinen
d514b50265 WNM: Collocated Interference Reporting
Add support for negotiating WNM Collocated Interference Reporting. This
allows hostapd to request associated STAs to report their collocated
interference information and wpa_supplicant to process such request and
reporting. The actual values (Collocated Interference Report Elements)
are out of scope of hostapd and wpa_supplicant, i.e., external
components are expected to generated and process these.

For hostapd/AP, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration. STAs are requested to perform
reporting with "COLOC_INTF_REQ <addr> <Automatic Report Enabled> <Report
Timeout>" control interface command. The received reports are indicated
as control interface events "COLOC-INTF-REPORT <addr> <dialog token>
<hexdump of report elements>".

For wpa_supplicant/STA, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration and setting Collocated
Interference Report Elements as a hexdump with "SET coloc_intf_elems
<hexdump>" control interface command. The hexdump can contain one or
more Collocated Interference Report Elements (each including the
information element header). For additional testing purposes, received
requests are reported with "COLOC-INTF-REQ <dialog token> <automatic
report enabled> <report timeout>" control interface events and
unsolicited reports can be sent with "COLOC_INTF_REPORT <hexdump>".

This commit adds support for reporting changes in the collocated
interference (Automatic Report Enabled == 1 and partial 3), but not for
periodic reports (2 and other part of 3).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 14:07:51 +02:00
Andrei Otcheretianski
d577f7f3d5 nl80211: Warn about interface name truncations
This is something useful to know and also eliminates format truncation
warnings.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-10-16 12:53:15 +03:00
Johannes Berg
40432e6eb3 nl80211: Implement netlink extended ACK support
Implement netlink extended ACK support to print out the error
message (if any).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-14 20:20:11 +03:00
Hu Wang
b898b65582 nl80211: Do not ignore disconnect event in case of !drv->associated
Commit 3f53c006c7 ('nl80211: Ignore
disconnect event in case of locally generated request') made
wpa_supplicant ignore the next received disconnect event for cases where
wpa_supplicant itself requested a disconnection. This can result in
ignoring a disconnection notification in some cases.

Considering a P2P Client receiving disconnect event from the kernel
after a P2P group is started, drv->ignore_next_local_disconnect is
cleared to 0, then wpa_driver_nl80211_disconnect() will be called during
the removal of the group, in which drv->ignore_next_local_disconnect is
set to 1 by mistake.

Do not allow ignore_next_local_{disconnect,deauth} to be set to 1 if the
driver is not in associated state (drv->associated is 0) to avoid this
type of cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-31 12:01:33 +03:00
Bhagavathi Perumal S
8bfbb295df nl80211: Fix sending of WDS STA event to the correct BSS context
The WDS-STA-INTERFACE-ADDED/WDS-STA-INTERFACE-REMOVED events were always
sent to the first BSS instead of the specific BSS that the STA was
connected to in multi-BSS cases. Fix this by using the BSS specific
context pointer.

Fixes: 1952b626ba ("hostapd: Add ctrl iface indications for WDS STA interface")
Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
2018-08-24 16:27:34 +03:00
Hu Wang
8a9950f7b6 nl80211: Indicate interface up only for the main netdev
ifname is checked for interface down event in commit
106fa1e97e ("nl80211: Indicate
interface-down event only for the main netdev"). Do the same for
interface up event to avoid unexpected notifications when the master
interface (e.g., a bridge interface) is set up while then WLAN interface
remains down.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-07-05 13:41:46 +03:00
Sathishkumar Muruganandam
c809756f9f nl80211: Allocate nl_sock for NETLINK_ROUTE when already_in_bridge
When we start hostapd having Hotspot 2.0 configuration with interface
already added to bridge interface, addition and deletion of new neighbor
to bridge ip neighbor table fails.

This is since 'bss->added_if_into_bridge' is not set which only allows
'drv->rtnl_sk' (nl_sock for NETLINK_ROUTE) allocation needed for bridge
ip neighbor table.

Add a new bit 'already_in_bridge' and set it when interface is already
added to bridge by some external component. Check this bit in addition
to 'bss->added_if_into_bridge' for 'drv->rtnl_sk' allocation done in
i802_init().

Now 'drv->rtnl_sk' is closed in wpa_driver_nl80211_deinit() regardless of
'bss->added_if_into_bridge' since when we have 'bss->already_in_bridge'
case too, this need to be removed.

brctl show

bridge name     bridge id               STP enabled     interfaces
br0             8000.8efdf006b050       no              ap

hostapd_cli raw STATUS-DRIVER

Selected interface 'ap'
ifindex=15
ifname=ap
brname=br0
addr=8e:fd:f0:06:b0:50
freq=5180
beacon_set=1
already_in_bridge=1
..

Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
2018-07-05 13:36:27 +03:00
Peter Oh
0928b62944 nl80211: Allow mesh interface to send channel switch request
Add mesh type to nl80211 channel switch request, so mesh is able to send
the request to kernel drivers.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2018-05-31 12:16:03 +03:00
Bhagavathi Perumal S
1952b626ba hostapd: Add ctrl iface indications for WDS STA interface
This allows user to get event indication when a new interface is
added/removed for 4addr WDS STA and also WDS STA ifname is informed
through the STA command.

Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
1baa130bd0 nl80211: Print NL80211_CMD_SET_POWER_SAVE errors in debug log
This makes it easier to understand what happened with PS configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Ahmad Masri
86c998d37a FT: Add FT auth algorithm to connect params when roaming
Add WPA FT auth to connect params in case of a re-connection to ESS
supporting FT when FT was used in the first connect.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
2018-04-20 00:35:41 +03:00
Ben Greear
f875da0448 nl80211: Add MLME auth work-around for -EEXIST errno
The Linux 4.9 kernel, at least, can return EEXIST when trying to auth a
station that already exists.

We have seen this bug in multiple places, but it is difficult to
reproduce. Here is a link to someone else that appears to have hit this
issue: https://github.com/greearb/ath10k-ct/issues/18

Signed-off-by: Ben Greear <greearb@candelatech.com>
2018-04-15 21:58:53 +03:00
Beniamino Galvani
77a020a118 wpa_supplicant: Fix auth failure when the MAC is updated externally
When connecting to a WPA-EAP network and the MAC address is changed
just before the association (for example by NetworkManager, which sets
a random MAC during scans), the authentication sometimes fails in the
following way ('####' logs added by me):

wpa_supplicant logs:
 wlan0: WPA: RX message 1 of 4-Way Handshake from 02:00:00:00:01:00 (ver=1)
 RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 d8 21 9d a5 73 98 88 26 ef 03 d2 ce f7 04 7d 23
 WPA: PMKID in EAPOL-Key - hexdump(len=22): dd 14 00 0f ac 04 d8 21 9d a5 73 98 88 26 ef 03 d2 ce f7 04 7d 23
 RSN: PMKID from Authenticator - hexdump(len=16): d8 21 9d a5 73 98 88 26 ef 03 d2 ce f7 04 7d 23
 wlan0: RSN: no matching PMKID found
 EAPOL: Successfully fetched key (len=32)
 WPA: PMK from EAPOL state machines - hexdump(len=32): [REMOVED]
 #### WPA: rsn_pmkid():
 #### WPA: aa              - hexdump(len=6): 02 00 00 00 01 00
 #### WPA: spa             - hexdump(len=6): 66 20 cf ab 8c dc
 #### WPA: PMK             - hexdump(len=32): b5 24 76 4f 6f 50 8c f6 a1 2e 24 b8 07 4e 9a 13 1b 94 c4 a8 1f 7e 22 d6 ed fc 7d 43 c7 77 b6 f7
 #### WPA: computed PMKID  - hexdump(len=16): ea 73 67 b1 8e 5f 18 43 58 24 e8 1c 47 23 87 71
 RSN: Replace PMKSA entry for the current AP and any PMKSA cache entry that was based on the old PMK
 nl80211: Delete PMKID for 02:00:00:00:01:00
 wlan0: RSN: PMKSA cache entry free_cb: 02:00:00:00:01:00 reason=1
 RSN: Added PMKSA cache entry for 02:00:00:00:01:00 network_ctx=0x5630bf85a270
 nl80211: Add PMKID for 02:00:00:00:01:00
 wlan0: RSN: PMKID mismatch - authentication server may have derived different MSK?!

hostapd logs:
 WPA: PMK from EAPOL state machine (MSK len=64 PMK len=32)
 WPA: 02:00:00:00:00:00 WPA_PTK entering state PTKSTART
 wlan1: STA 02:00:00:00:00:00 WPA: sending 1/4 msg of 4-Way Handshake
 #### WPA: rsn_pmkid():
 #### WPA: aa              - hexdump(len=6): 02 00 00 00 01 00
 #### WPA: spa             - hexdump(len=6): 02 00 00 00 00 00
 #### WPA: PMK             - hexdump(len=32): b5 24 76 4f 6f 50 8c f6 a1 2e 24 b8 07 4e 9a 13 1b 94 c4 a8 1f 7e 22 d6 ed fc 7d 43 c7 77 b6 f7
 #### WPA: computed PMKID  - hexdump(len=16): d8 21 9d a5 73 98 88 26 ef 03 d2 ce f7 04 7d 23
 WPA: Send EAPOL(version=1 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=22 keyidx=0 encr=0)

That's because wpa_supplicant computed the PMKID using the wrong (old)
MAC address used during the scan. wpa_supplicant updates own_addr when
the interface goes up, as the MAC can only change while the interface
is down. However, drivers don't report all interface state changes:
for example the nl80211 driver may ignore a down-up cycle if the down
message is processed later, when the interface is already up. In such
cases, wpa_supplicant (and in particular, the EAP state machine) would
continue to use the old MAC.

Add a new driver event that notifies of MAC address changes while the
interface is active.

Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
2018-03-30 12:16:42 +03:00
Bhagavathi Perumal S
72123a84cb hostapd: Add last_ack_rssi into ctrl iface cmd STA
This allows external application to get last ACK signal strength of the
last transmitted frame if the driver makes this information
(NL80211_STA_INFO_ACK_SIGNAL) available.

Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2018-03-19 19:23:26 +02:00
Emmanuel Grumbach
299d21e8e2 nl80211: Use the new NL80211_MFP_OPTIONAL option
Now we can configure the network block so that it allows MFP setting for
the NL80211_CMD_CONNECT command. If the kernel finds an AP that requires
MFP, it'll be able to connect to it.

Note that since NL80211_MFP_OPTIONAL isn't supported for
NL80211_CMD_ASSOCIATE, we need to take the MFP configuration outside
nl80211_connect_common(). In addition, check that
NL80211_EXT_FEATURE_MFP_OPTIONAL is supported, to be backward compatible
with older kernels.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2018-02-17 18:50:28 +02:00
Avraham Stern
05fc7c68f6 nl80211: Add API to set the PMK to the driver
Add support for setting the PMK to the driver. This is used for
drivers that support 4-way handshake offload.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2018-02-17 18:36:16 +02:00
Eliad Peller
730c5a1d09 nl80211: Support passing PSK on connect
If the driver advertises WPA_DRIVER_FLAGS_4WAY_HANDSHAKE support, pass
the PSK on connect.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2018-02-17 18:31:05 +02:00
Jouni Malinen
0887215d94 nl80211: Do not try to add too large NL80211_ATTR_PMK for set/del PMKSA
The current cfg80211 limit for the maximum NL80211_ATTR_PMK length is
48, so anything larger than that will result in the operation completely
failing. Since the PMKSA entries can be used without the PMK for most
purposes (the main use case for PMK currently is offloaded FILS
authentication), try to go ahead by configuring only the PMKID for the
case where 64-octet PMK is needed (which is currently limited to only
DPP with NIST P-521 and brainpoolP512r1 curves). This can fix DPP
connections with drivers that expect to get the PMKID through this
interface while still leaving the actual 4-way handshake for user space.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-10 12:16:53 +02:00
Jouni Malinen
e7f6e6ee1b nl80211: Print NL80211_CMD_{SET,DEL}_PMKSA failures in debug log
This makes it easier to notice if the driver operation to manage PMKSA
cache information fails unexpectedly.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-10 12:10:07 +02:00
Sunil Dutt
40a68f3384 nl80211: Create a netlink socket handle for the Connect interface
This netlink socket handle owns the connect request and is further used
by the host driver/kernel to request for the external authentication.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-02 19:02:44 +02:00
Sunil Dutt
ba71cb821a nl80211: Introduce the interface for external authentication
This command/event interface can be used by host drivers that do not
define separate commands for authentication and association but rely on
wpa_supplicant for the authentication (SAE) processing.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-02 18:51:04 +02:00
Srinivas Dasari
e005725a69 nl80211: Add DPP and OWE AKM selectors to CONNECT/ASSOC request
This is needed to support drivers that use NL80211_ATTR_AKM_SUITES.

Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org>
2018-01-31 11:21:10 +02:00
vamsi krishna
d98038bb05 FILS: Driver configuration to disable/enable FILS features
The new disable_fils parameter can be used to disable FILS functionality
in the driver. This is currently removing the FILS Capability bit in
Extended Capabilities and providing a callback to the driver wrappers.
driver_nl80211.c implements this using a QCA vendor specific command for
now.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-15 20:52:17 +02:00
Jouni Malinen
963d3149ab nl80211: Fix NL80211_MESHCONF_AUTO_OPEN_PLINKS encoding
This nl80211 attribute uses NLA_U8 policy in cfg80211 and wpa_supplicant
needs to use same size when writing the attribute.

This fixes mesh mode regression triggered by kernel commit "net:
netlink: Update attr validation to require exact length for some types"
in v4.15-rc1 that resulted in the following debug log entry when trying
to join a mesh:
nl80211: mesh join failed: ret=-22 (Invalid argument)

Fixes: 6c1664f605 ("nl80211: Add new commands to support mesh interfaces")
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-01 22:21:24 +02:00
Jouni Malinen
a2426829ce nl80211: Fix NL80211_ATTR_SMPS_MODE encoding
This nl80211 attribute uses NLA_U8 policy in cfg80211 and
hostapd/wpa_supplicant needs to use same size when writing the
attribute.

This fixes AP mode regression triggered by kernel commit "net: netlink:
Update attr validation to require exact length for some types" in
v4.15-rc1 that resulted in the following debug log entry when trying to
enable beaconing:
nl80211: Beacon set failed: -34 (Numerical result out of range)

Fixes: da1080d721 ("nl80211: Advertise and configure SMPS modes")
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-01 20:22:44 +02:00
Vidyullatha Kanchanapally
3c67e977de nl80211: Add support to send updated connection parameters
After an initial connection certain connection parameters may be
updated. It may be necessary to send these parameters to drivers since
these will be used in driver-initiated roaming cases. This commit
defines the driver_ops call for this and implements the needed
functionality for the nl80211 driver interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-17 16:04:51 +03:00
bhagavathi perumal s
3567641ebb Add TX/RX rate info and signal strength into STA output
These allow external programs to fetch the TX and RX rate information
and signal strength for a specific STA through the hostapd control
interface command "STA <addr>". The values of these attributes are
filled in the response of nl80211 command NL80211_CMD_GET_STATION.

Signed-off-by: bhagavathi perumal s <bperumal@qti.qualcomm.com>
2017-10-05 12:12:24 +03:00
Rohit Pratap Singh
fdbfb63e45 nl80211: Fix bridge name print while removing interface from bridge
Removing interface from bridge in_br
linux_br_del_if(drv->global->ioctl_sock, in_br, ifname)
but in case of failure, the error print is incorrect:
it should show error for "in_br" instead of the wrong bridge name
"brname".

Signed-off-by: Rohit Pratap Singh <rohit.s@samsung.com>
Signed-off-by: Amit Khatri <amit.khatri@samsung.com>
2017-09-10 22:11:08 +03:00
Jouni Malinen
64a0a75b5b nl80211: Fix auth_alg selection with FILS in the connect command
NL80211_ATTR_AUTH_TYPE needs to be skipped if multiple auth_alg options
are included. The previous list missed the new FILS auth_alg here and
ended up not doing so if OPEN and FILS were included.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-08-24 23:30:20 +03:00
Ashwini Patil
b04854ceff nl80211/MBO: Set temporary disallowed BSSID list to driver
Set temporary disallowed BSSID list to the driver so that the driver
doesn't try to connect to any of the blacklisted BSSIDs during
driver-based roaming operation. This commit includes support only for
the nl80211 driver interface using a QCA vendor command for this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-30 17:27:44 +03:00
Vidyullatha Kanchanapally
b6ea764252 nl80211: Make KCK attribute optional in rekey data
New AKM suites like FILS-SHA256 do not use KCK and hence KCK length can
be zero. Add changes to include KCK attribute in rekey data only if the
length is non-zero.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-23 18:58:24 +03:00
Jouni Malinen
00b02149ed nl80211: Register to receive DPP Public Action frames
These are needed for DPP exchanges. In addition, register GAS frames for
DPP builds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-17 18:04:54 +03:00
Jouni Malinen
5e0c20ff3e nl80211: Do not notify interface as re-enabled if initialization fails
wpa_supplicant tries to reinitialize an interface when a previously
removed netdev is restored (e.g., re-insert a USB dongle). If that
initialization fails (e.g., driver ejects ifconfig UP), the previous
implementation resulted in leaving the interface in incomplete state
while still claiming to upper layers that the interface status has
changed back to functional one.

Fix this by skipping the interface status update if reinitialization
fails. In other words, remain in INTERFACE_DISABLED state if the
interface cannot be re-enabled successfully.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-06 03:07:43 +03:00
Beniamino Galvani
290834df69 nl80211: Fix race condition in detecting MAC change
Commit 3e0272ca00 ('nl80211: Re-read MAC
address on RTM_NEWLINK') added the detection of external changes to MAC
address when the interface is brought up.

If the interface state is changed quickly enough, wpa_supplicant may
receive the netlink message for the !IFF_UP event when the interface
has already been brought up and would ignore the next netlink IFF_UP
message, missing the MAC change.

Fix this by also reloading the MAC address when a !IFF_UP event is
received with the interface up, because this implies that the
interface went down and up again, possibly changing the address.

Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
2017-05-13 20:01:44 +03:00
Masashi Honma
31a856a127 mesh: Make NL80211_MESHCONF_RSSI_THRESHOLD configurable
In some practical cases, it is useful to suppress joining to node in the
distance. The new field mesh_rssi_threshold could be used as RSSI
threshold for joining.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-05-08 16:23:02 +03:00
Vamsi Krishna
178553b709 MBO: Add support to set ignore assoc disallow to driver
Add support to set ignore assoc disallow to the driver so that the
driver ignores assoc disallowed bit set by APs while connecting. This is
used by drivers that handle BSS selection and roaming internally.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-05-05 00:26:05 +03:00
Vidyullatha Kanchanapally
061a3d3d53 nl80211: Add support for FILS Cache Identifier in add/remove_pmkid()
This is needed for configuring PMKSA cache entries to the driver with
the FILS Cache Identifier and SSID.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-07 17:03:37 +03:00
Vidyullatha Kanchanapally
6fbb54140b driver: Move add_pmkid() and remove_pmkid() arguments into a struct
This makes it easier to add more arguments to these wpa_driver_ops
functions.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-07 17:03:35 +03:00
Vidyullatha Kanchanapally
ad295f3b85 nl80211: Add support for FILS shared key offload
Add support for FILS shared key offload for drivers which advertize
FILS shared key support using NL80211_CMD_CONNECT.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-07 16:21:55 +03:00
Jouni Malinen
cad291d671 FILS: Define authentication algorithm for FILS SK auth with PFS
This is needed to add PFS support into hostapd and wpa_supplicant FILS
shared key authentication.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 22:39:38 +02:00
Kanchanapally, Vidyullatha
3ab484928a nl80211: Driver command for checking BTM accept/reject
Add driver interface command using the QCA vendor extensions to check
the driverr whether to accept or reject a BSS transition candidate. For
the reject case, report an MBO reject reason code.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-07 00:20:29 +02:00
Vamsi Krishna
8331c9b316 nl80211: Add support for mgmt_tx with random TA
This adds support for specifying a random TA for management frame
transmission commands and driver capability flags for indicating whether
this is supported in not-connected and connected states.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-07 19:35:34 +02:00
Dedy Lansky
89fa633afb nl80211: Fix error while enabling AP mode with driver-SME
Following commit a70cd0db87 ('Don't
register for Beacon frames for IEEE 802.11ad AP'),
nl80211_get_wiphy_data_ap() is unconditionally called when starting AP.
This function tries to register for Beacon frames RX which fails for
some driver which don't support such registration and do not need it in
case the driver implements AP mode SME functionality.

Fix this by conditionally calling nl80211_get_wiphy_data_ap() like prior
to commit a70cd0db87.

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
2017-02-05 20:48:23 +02:00
Masashi Honma
7813b7c34d nl80211: Fix a memory leak on deinit with HT enabled mesh
Commit a70cd0db87 ('nl80211: Don't
register for Beacon frames for IEEE 802.11ad AP') could cause a trailing
memory leak on IEEE 802.11n enabled mesh. This commit fixes the issue.

-----------------
ELOOP: remaining socket: sock=12 eloop_data=0xba8260 user_data=0xbb3d90 handler=0x4aeb90
WPA_TRACE: eloop unregistered socket handler: 0x4aeb90
     nl80211_recv_beacons() ../src/drivers/driver_nl80211.c:625
WPA_TRACE: eloop sock - START
[0]: ./hostap/wpa_supplicant/wpa_supplicant() [0x431f2a]
     eloop_sock_table_add_sock() ../src/utils/eloop.c:360
[1]: ./hostap/wpa_supplicant/wpa_supplicant() [0x4b0e49]
     nl80211_register_eloop_read() ../src/drivers/driver_nl80211.c:153
[2]: ./hostap/wpa_supplicant/wpa_supplicant() [0x4bacf0]
     dl_list_add() src/utils/list.h:30
     nl80211_get_wiphy_data_ap() ../src/drivers/driver_nl80211.c:728
     wpa_driver_nl80211_set_ap() ../src/drivers/driver_nl80211.c:3786
[3]: ./hostap/wpa_supplicant/wpa_supplicant(ieee802_11_set_beacon+0x150) [0x469700]
     ieee802_11_set_beacon() ../src/ap/beacon.c:1349
[4]: ./hostap/wpa_supplicant/wpa_supplicant(ieee802_11_set_beacons+0x45) [0x469805]
     ieee802_11_set_beacons() ../src/ap/beacon.c:1368
[5]: ./hostap/wpa_supplicant/wpa_supplicant() [0x437559]
     mesh_mpm_add_peer() mesh_mpm.c:688
[6]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_mesh_new_mesh_peer+0x42) [0x439182]
     wpa_mesh_new_mesh_peer() mesh_mpm.c:737
[7]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_mesh_notify_peer+0x80) [0x436460]
     wpa_mesh_notify_peer() mesh.c:347
[8]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_supplicant_event+0xc7a) [0x4a69ba]
     wpa_supplicant_event() events.c:4312
[9]: ./hostap/wpa_supplicant/wpa_supplicant(process_global_event+0xaf0) [0x4c2d40]
     nl80211_new_peer_candidate() ../src/drivers/driver_nl80211_event.c:1247
     do_process_drv_event() ../src/drivers/driver_nl80211_event.c:2322
     process_global_event() ../src/drivers/driver_nl80211_event.c:2360
[10]: /lib/x86_64-linux-gnu/libnl-3.so.200(nl_recvmsgs_report+0x3dc) [0x7f937176873c]
[11]: /lib/x86_64-linux-gnu/libnl-3.so.200(nl_recvmsgs+0x9) [0x7f9371768ba9]
[12]: ./hostap/wpa_supplicant/wpa_supplicant() [0x4aeb58]
     wpa_driver_nl80211_event_receive() ../src/drivers/driver_nl80211.c:1457
[13]: ./hostap/wpa_supplicant/wpa_supplicant() [0x43242e]
     eloop_sock_table_dispatch() ../src/utils/eloop.c:598
[14]: ./hostap/wpa_supplicant/wpa_supplicant(eloop_run+0x22e) [0x432e0e]
     eloop_sock_table_dispatch() ../src/utils/eloop.c:589
     eloop_run() ../src/utils/eloop.c:1219
[15]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_supplicant_run+0x77) [0x49e327]
     wpa_supplicant_run() wpa_supplicant.c:5608
WPA_TRACE: eloop sock - END
MEMLEAK[0xba81b0]: len 72
WPA_TRACE: memleak - START
[0]: ./hostap/wpa_supplicant/wpa_supplicant(os_malloc+0x57) [0x430d67]
     os_malloc() ../src/utils/os_unix.c:690
[1]: ./hostap/wpa_supplicant/wpa_supplicant(os_zalloc+0xe) [0x430fce]
     os_zalloc() ../src/utils/os_unix.c:749
[2]: ./hostap/wpa_supplicant/wpa_supplicant() [0x4babaa]
     nl80211_get_wiphy_data_ap() ../src/drivers/driver_nl80211.c:692
     wpa_driver_nl80211_set_ap() ../src/drivers/driver_nl80211.c:3786
[3]: ./hostap/wpa_supplicant/wpa_supplicant(ieee802_11_set_beacon+0x150) [0x469700]
     ieee802_11_set_beacon() ../src/ap/beacon.c:1349
[4]: ./hostap/wpa_supplicant/wpa_supplicant(ieee802_11_set_beacons+0x45) [0x469805]
     ieee802_11_set_beacons() ../src/ap/beacon.c:1368
[5]: ./hostap/wpa_supplicant/wpa_supplicant() [0x437559]
     mesh_mpm_add_peer() mesh_mpm.c:688
[6]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_mesh_new_mesh_peer+0x42) [0x439182]
     wpa_mesh_new_mesh_peer() mesh_mpm.c:737
[7]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_mesh_notify_peer+0x80) [0x436460]
     wpa_mesh_notify_peer() mesh.c:347
[8]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_supplicant_event+0xc7a) [0x4a69ba]
     wpa_supplicant_event() events.c:4312
[9]: ./hostap/wpa_supplicant/wpa_supplicant(process_global_event+0xaf0) [0x4c2d40]
     nl80211_new_peer_candidate() ../src/drivers/driver_nl80211_event.c:1247
     do_process_drv_event() ../src/drivers/driver_nl80211_event.c:2322
     process_global_event() ../src/drivers/driver_nl80211_event.c:2360
[10]: /lib/x86_64-linux-gnu/libnl-3.so.200(nl_recvmsgs_report+0x3dc) [0x7f937176873c]
[11]: /lib/x86_64-linux-gnu/libnl-3.so.200(nl_recvmsgs+0x9) [0x7f9371768ba9]
[12]: ./hostap/wpa_supplicant/wpa_supplicant() [0x4aeb58]
     wpa_driver_nl80211_event_receive() ../src/drivers/driver_nl80211.c:1457
[13]: ./hostap/wpa_supplicant/wpa_supplicant() [0x43242e]
     eloop_sock_table_dispatch() ../src/utils/eloop.c:598
[14]: ./hostap/wpa_supplicant/wpa_supplicant(eloop_run+0x22e) [0x432e0e]
     eloop_sock_table_dispatch() ../src/utils/eloop.c:589
     eloop_run() ../src/utils/eloop.c:1219
[15]: ./hostap/wpa_supplicant/wpa_supplicant(wpa_supplicant_run+0x77) [0x49e327]
     wpa_supplicant_run() wpa_supplicant.c:5608
WPA_TRACE: memleak - END
MEMLEAK: total 72 bytes
-----------------

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-01-29 17:55:10 +02:00
Jouni Malinen
a042e39acf nl80211: Use RSN_CIPHER_SUITE_* instead of WLAN_CIPHER_SUITE_*
This is a step towards getting rid of the unnecessary duplication of
definitions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 14:04:44 +02:00
Jouni Malinen
3aa24db953 nl80211: Use RSN_AUTH_KEY_MGMT_* instead of WLAN_AKM_SUITE_*
This is a step towards getting rid of the unnecessary duplication of
definitions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-28 12:27:48 +02:00
Dedy Lansky
a70cd0db87 nl80211: Don't register for Beacon frames for IEEE 802.11ad AP
Beacon frames are not supported in IEEE 802.11ad network (DMG-beacons
used instead). To allow hostapd to manage IEEE 802.11ad AP with
device_ap_sme disabled, skip nl80211_register_beacons() for IEEE
802.11ad AP.

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
2017-01-13 15:58:01 +02:00